summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-12-24mb/google/volteer/variant/lindar: Add SSD D3 cold supportKevin Chang
This patch add SSD D3 cold support for lindar. BUG=b:172405687 BRANCH=firmware-volteer-13521.B TEST=Built and booted into OS. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ie343bbff3bde4ff2a7e89bd384d5661af372b560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-24mb/google/volteer/var/voema: Disable PCIe 7 and 8 for WLAN and SD cardDavid Wu
Based on latest schematic, disable PCIe 7 and 8 for WLAN and SD card. BUG=b:169356808 TEST=FW_NAME=voema emerge-volteer coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I2a4658a382c094c2a5b16b7acaf464f54e9897b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-24mb/google/volteer/var/voema: Enable RTD3 for the NVMe deviceDavid Wu
Enable Runtime D3 for the volteer variants that have GPIO power control of the NVMe device attached to PCIe Root Port 9. Enable the GPIO for power control for variants that do not already have it configured to allow the power to be disabled in D3 state. BUG=b:169356808 TEST=tested on voema Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I28ef074225c533e1a97b6ec4a1a5dd1dcc198168 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48848 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24soc/intel/xeon_sp/cpx: Disable isoch operation for performanceJohnny Lin
Isochronous operation negatively impacts memory performance, as per Intel MLC (Memory Latency Checker) benchmark results. Thus, disable isochronous operation, like analogous UEFI firmware does. The MLC results after disabling isoch: "--max_bandwidth" ALL Reads : 106948.17 3:1 Reads-Writes : 101580.46 2:1 Reads-Writes : 100523.26 1:1 Reads-Writes : 99059.44 Stream-triad like : 97762.47 "--peak_injection_bandwidth" ALL Reads : 105724.3 3:1 Reads-Writes : 100655.8 2:1 Reads-Writes : 99463 1:1 Reads-Writes : 98708 Stream-triad like : 91515 The MLC results before disabling isoch: "--max_bandwidth" ALL Reads : 88824.96 3:1 Reads-Writes : 94820.81 2:1 Reads-Writes : 94867.53 1:1 Reads-Writes : 92567.36 Stream-triad like : 91900.43 "--peak_injection_bandwidth" ALL Reads : 88859.6 3:1 Reads-Writes : 94064 2:1 Reads-Writes : 94186.2 1:1 Reads-Writes : 92516.1 Stream-triad like : 85147.4 TEST=On OCP Delta Lake, verify that MLC benchmark results have improved. Change-Id: I08c22ee001b601e607452b3f23fad969ecb484b4 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48738 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-24mb/google/kukui: Add a new config 'Katsu'Sunway
A new board introduced to Kukui family. BUG=b:176206134 TEST=make # select Katsu BRANCH=kukui Signed-off-by: Sunway <lisunwei@huaqin.corp-partner.google.com> Change-Id: I09fe2b8f6922dfd2af6424830568466fb98f7aee Reviewed-on: https://review.coreboot.org/c/coreboot/+/48874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-23soc/intel/common: Remove unused SOC_INTEL_COMMON_ACPIMarc Jones
Remove the unused SOC_INTEL_COMMON_ACPI Kconfig option. Change-Id: Id62cd44e0f7e4175ae65c9388569231d5c8c1fbc Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-23src/soc/intel/xeon_sp/acpi.c: Remove unnecessary .hMarc Jones
Remove the unnecessary header file includes. Change-Id: I0d849cb236f304b87332aa64b2f10c73cad2d4dd Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-12-23nb/intel/sandybridge: Refactor ODT stretch table codeAngel Pons
Leverage existing `ch_dimms` value and use constants for brevity. Change-Id: I4e08166c8e9fbd15ff1dcd266abb0689e4b159f7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-23nb/intel/sandybridge: Refactor `dram_find_spds_ddr3`Angel Pons
Pointers to structs can be very useful, especially when they point to an array element. In this case, changing one pointer allows the function to be rewritten more concisely, since most redundancy can be eliminated. Tested on Asus P8Z77-V LX2, still boots. No functional difference. Change-Id: I7f0c37ea49db640f197162f371165a6f8e9c1b9c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-23nb/intel/sandybridge: Always wait for IOSAV after starting itAngel Pons
Ensure that IOSAV is finished before continuing. This might solve some random failures on the I/O and roundtrip latency training algorithm. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Ic08a40346b6c60e372bada10f9c4ee42eb974f9f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48403 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Introduce `iosav_run_once_and_wait`Angel Pons
Most ofte, `iosav_run_once` precedes a `wait_for_iosav` call. Add a helper function to reduce clutter. The cases where `iosav_run_once` isn't followed by `wait_for_iosav` will be handled in a follow-up. Tested on Asus P8Z77-V LX2, still boots. Change-Id: Ic76f53c2db41512287f41b696a0c4df42a5e0f12 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48402 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Remove unnecessary commentsAngel Pons
These comments were helpful before the massive IOSAV refactoring, but they are no longer needed since the function names are clear enough. Change-Id: Ieb9bdf3f7fc72f63a8978f2b98e0bc8228c55868 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48401 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Print delays in decimalAngel Pons
Print delay values in a suitable format for human consumption. Change-Id: I0d86187d3e458ee2cb3fd11ec896ac363b8d3249 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48400 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Add comment to TC_RWP writeAngel Pons
Change-Id: I164daa59696f2fe8de3a4b3e7da46c7c723778eb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48602 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Use proper names to refer to training stepsAngel Pons
Now that the purpose of each training algorithm is clear, replace the last instances of the original names in comments and print statements with the current, correct names. Also, print which channel has failed command training, for completeness and consistency with other errors. Change-Id: I9cc5c4b04499297825ca004c6bd1648a68449d2c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48601 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Add comments about I/O and RT latencyAngel Pons
Document the algorithm to adjust I/O and roundtrip latencies. Change-Id: Ic8b9aed54a34bb3252c457e87e81387fd410e305 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48397 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Rename I/O data timingsAngel Pons
Tested on Asus P8H61-M PRO, still boots. Change-Id: I147ba0ade8a5317a0fe76e9ea84947fd91d794b4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47773 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Use bitfields for I/O data timingsAngel Pons
Refactor in preparation to split up `program_timings`. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I68410165f397d8b4f662e40e88fb6a58ab1c5cff Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47772 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23nb/intel/sandybridge: Compute data timings independentlyAngel Pons
Use absolute values for the Rx and Tx bus timings instead of values relative to the CA (Command/Address) bus timing. This makes the calculations more accurate, less complex and less error-prone. Tested on Asus P8H61-M PRO, still boots. Training results do not seem to be affected by this patch, and the margins roughly have the same shape. Change-Id: I28ff1bdaadf1fcbca6a5e5ccdd456de683206410 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47771 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-23Makefile: Add $(xcompile) to specify where to write xcompileRaul E Rangel
This file was being written to the root src directory. It is the only file being written to src during a normal build, while all others are being written to $(obj). I added a new variable to allow specifying the xcompile path. This allows generating a single file if building multiple boards. I also moved the default location into $(obj) so we don't pollute the src directory by default. I also cleaned up the generation of xcompile by removing the unnecessary eval and NOCOMPILE check. I also left .xcompile in distclean so it cleans up stale files. Since .xcompile is written into $(obj), `make clean` will now remove it. The tegra Makefiles are outside of the normal build process, so I just updated those Makefiles to point to the default xcompile location of a normal build. The what-jenkins-does target had to be updated to support these special targets. We generate an xcompile specifically for these targets and pass it into the Makefile. Ideally we should get these targets added to the main build. BUG=b:112267918 TEST=ran `emerge-grunt coreboot` and `make what-jenkins-does` Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia83f234447b977efa824751c9674154b77d606b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/28101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-23vc/intel/fsp/fsp2_0/alderlake: Update FSP header file version to 1514_11Subrata Banik
List of changes: FSP-S Header: - Add UPD MicrocodeRegionBase and MicrocodeRegionSize - Adjust UPD Offset for Reservedxx Change-Id: I376abf6cd64dcf8c848901074e2c2f30d4f302da Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2020-12-23soc/intel/alderlake: Enable support for extended BIOS windowSubrata Banik
Port commit ba75c4c (soc/intel/tigerlake: Enable support for extended BIOS window) for Alderlake Change-Id: Iaa8464d45884de433cca4f6a250cdd8d4c8f3661 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-23soc/intel/alderlake: Add SPI DMI Destination IDSubrata Banik
Port commit 237afda (src/soc/intel/tigerlake: Add SPI DMI Destination ID) into Alderlake. Change-Id: Ia0b465d405ab3c70b7d4094d32c182cab30fe531 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-23mb/intel/adlrvp: Make SI_ALL region within 16MiBSubrata Banik
TEST=Able to build and boot ADLRVP. Change-Id: I93da53f8835e0eec4cf4e78daab26332fd55d334 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-23mb/clevo/cml-u: Reorder selects alphabeticallyFelix Singer
Change-Id: Idd02573e6b47c3bcbdcefa7b04fb9098b600df49 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-22soc/intel/common: Fix XHCI elog driverTim Wawrzynczak
Commit 56fcfb5 misused the PCH_DEVFNs passed to the XHCI elog driver, by passing them directly to pci_s_read_config32. This is incorrect, as it is the wrong PCI devfn encoding to pass to that function. BUG=b:175996770 TEST=abuild Change-Id: Id7c146c1f50ee64a725bd50f9f11a7f159013a2b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-22soc/intel/common/block/acpi: Fix get_cores_per_packagePatrick Rudolph
Current implementation uses CPUID 0Bh function that returns the number of logical cores of requested level. The problem with this approach is that this value doesn't change when HyperThreading is disabled (it's in the Intel docs), so it breaks generate_cpu_entries() because `numcpus` ends up being zero due to integer division truncation. - Use MSR 0x35 instead, which returns the correct number of logical processors with and without HT. - Use cpu_read_topology() to gather the required information Tested on Prodrive Hermes, the ACPI code is now generated even with HyperThreading disabled. Change-Id: Id9b985a07cd3f99a823622f766c80ff240ac1188 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-22soc/intel/cannonlake: Add Iccmax and loadlines for CML-SGaggery Tsai
Following up 3ccae2b7, this patch adds Iccmax and AC/DC loadlines and iPL2 for CML-S CPUs. The information is from CML EDS volume 1, doc #606599 and pdg #610244. Change-Id: Id2797a979a8b6a52a34baae66f95c7136ed1dc72 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38288 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22soc/intel/apl/graphics: add missing left-shiftMichael Niewöhner
According to doc# IHD-OS-BXT-Vol 2b-05.17 the cycle delay is in the bit range 8:4 of register PP_CONTROL. The current code writes the value to bits 4:0, though. Correct that by shifting the value left by 4 bits. Change-Id: If407932c847da39b19e307368c9e52ba1c93bccd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-22sb/intel/ibexpeak: Drop ChromeOS setup for GNVSKyösti Mälkki
The CHROMEOS option was never used with ibexpeak, code was copy-pasted and forked from bd82x6x. Since a custom ibexpeak/nvs.h was already made, an accompanying globalnvs.asl is added here too without chromeos_acpi_t. Change-Id: I16406516b51c13d49593bc8a3e1e5b868eea6f24 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48766 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22sb,soc/intel: Drop unnecessary headersKyösti Mälkki
Files under sb/ or soc/ should not have includes that tie those directly to external components like ChromeEC os ChromeOS vendorcode. Change-Id: Ib56eeedaa9d7422e221efa9c8480ed5e12024bca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48765 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22soc/amd/common/psp: Remove files from bootblockMarshall Dawson
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: I8d775d2d813cf92245f3be4d41b3295ca6da18ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/48798 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22soc/amd/stoneyridge: Remove unused psp.hMarshall Dawson
psp.h was first included when Stoney Ridge began loading the first SMU firmware. That step was later moved from bootblock to romstage. Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Change-Id: Id646390ce377143d09455f797de1b149dbb615b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48797 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22mb/google/volteer: Add GPIO to drobit supportFrankChu
Add support for gpio driver for drobit BUG=b:175351914 BRANCH=none TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I54ba182c6da3db282961b3c72a4d2d11d1001e95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-22mb/google/volteer: Update SPD table for drobitFrankChu
drobit memory table as follow: value Vendor Part number 0x00 MICRON MT53E512M32D2NP-046 WT:E 0x00 HYNIX H9HCNNNBKMMLXR-NEE 0x01 MICRON MT53E1G32D2NP-046 WT:A 0x02 HYNIX H9HCNNNCPMMLXR-NEE BUG=b:175351914 BRANCH=none TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Icd9439f8449856d4ec6798a4e4310dd139bce05f Reviewed-on: https://review.coreboot.org/c/coreboot/+/48496 Reviewed-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22mb/google/volteer: Update drobit device treeFrankChu
Update drobit device tree override to match schematics. BUG=b:175351914 BRANCH=none TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I48a3024df4270b111b90c4fb56847aad6e65bfa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48495 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-22mb/clevo/cml-u: move gpio early init to bootblock_mainboard_early_initMichael Niewöhner
Move gpio early init to bootblock_mainboard_early_init to make the bootblock console work as early as possible. Change-Id: I619f7d0e15adae284b606dd20c3c1f04f3eafd7b Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48801 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22Revert "mb/clevo/cml-u: drop duplicated configuration of UART pads"Felix Singer
This reverts commit 1a0071c7115819302c7df3fa2c07b1ca971e515d. Reason for revert: UART pad configuration should not be done in common code, since it could cause short circuits if the user configures a wrong UART index. Change-Id: I6022935eaab748f82c6330be0729ff72f4880493 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-22mb/google/zork/var/vilboz: Add enable acp_i2s_use_external_48mhz_osc flagJohn Su
Add enable acp_i2s_use_external_48mhz_osc flag and then WWAN sku will use external clock source at next build. BUG=b:174121847 BRANCH=zork TEST=build vilboz and check MISC_CLK_CNTL1. Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ida747938373f648524b1e7f34bc69e372a69c4f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48556 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-22soc/mediatek/mt8192: Do dramc software impedance calibrationHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I2c6ffe885717997540a0a9721310e355a3b6a87d Reviewed-on: https://review.coreboot.org/c/coreboot/+/44704 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-22soc/mediatek/mt8192: Do EMI init before dram calibrationHuayang Duan
Reference datasheet: External Memory Interface (EMI).pdf, Document No: RH-A-2020-0055. Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I3b778698a09c999252fef3153ac1e869ea9d90cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/44703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-22soc/mediatek/mt8192: Do memory pll init before calibrationHuayang Duan
Memory PLL is used to provide the basic clock for dram controller and DDRPHY. PLL must be initialized as predefined way. First, enable PLL POWER and ISO, wait at least 30us, release ISO, then configure PLL frequency and enable PLL master switch. At last, enable control ability for SPM to switch between active and idle when system is switched between normal and low power mode. TEST=Confirm Memory PLL frequency is right by frequency meter Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: Ieb4e6cbf19da53d653872b166d3191c7b010dca6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-12-22soc/intel/xeon_sp: Use common block ACPIMarc Jones
Use the common block ACPI to further reduce the duplicate code. Change-Id: If28d75cbb2a88363d70e3ae6a2cace46cb6bbbab Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48248 Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21Revert "mb/clevo/kbl-u: drop duplicated configuration of UART pads"Felix Singer
This reverts commit ccceb2250eeb820fccfb62d1f3ab407582d2e79f. Reason for revert: UART pad configuration should not be done in common code, since it could cause short circuits if the user configures a wrong UART index. Change-Id: Idc268debc60a027ed2f5a76e0de8ea2d1cde0fc4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-21mb/prodrive/hermes: Update USB 2.0 settingsAngel Pons
Test results show that USB signals look better with these settings. Yes, there's a macro in the devicetree now. All ports use the same settings except for the overcurrent pin, so this avoids redundancy. Change-Id: Ib0dafab88d8dcc05388b724f6a7183c13ac64934 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48694 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/octopus/var/phaser: Add support for G2TOUCH Touchscreenrasheed.hsueh
Add devicetree configuration for G2TOUCH Touchscreen controller. BUG=b:175513059 BRANCH=octopus TEST=build bios, check i2c bus and verify touch screen works fine Change-Id: Ib57597c4998f205c664e13befb4c44532b7dbd4f Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21drivers/tpm/ppi_stub: Fix interface versionPatrick Rudolph
The latest version defined by TCG is 1.3. Change-Id: Idb12e2212d6d38c720c8fe989678724c871af6ef Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45569 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21drivers/tpm: Implement full PPIPatrick Rudolph
Implement the ACPI PPI interface as described in "TCG PC Client Physical Presence Interface Specification" Version 1.3. Add a new Kconfig that allows to use the full PPI instead of the stub version compiled in. This doesn't add code to execute the PPI request, as that's up to the payload with graphical UI support. Tested on GNU/Linux 5.6 using the sysfs interface at: /sys/class/tpm/tpm0/ppi/ Change-Id: Ifffe1d9b715e2c37568e1b009e86c298025c89ac Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45568 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/dedede/var/storo: Generate SPD ID for supported memory partsTao Xia
Add supported memory parts in the mem_parts_used.txt and generate the SPD ID for the memory parts. The memory parts being added are: MT53E512M32D2NP-046 WT:E H9HCNNNBKMMLXR-NEE MT53E1G32D2NP-046 WT:A H9HCNNNCPMMLXR-NEE BUG=None TEST=Build the storo board. Signed-off-by: Tao Xia <xiatao5@huaqin.corp-partner.google.com> Change-Id: Ifd935865927bb9fccf95eb4924ca6986d0c19442 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21mb/google/dedede: Update Boten setting for USI PEN detection.rasheed.hsueh
Update devicetree and gpio driving of boten that enable stylus PEN detect signal is not dual-routed on Boten. Since the gpio_keys kernel driver expects the pad to be owned by GPIO controller (i.e. configured for GPIO IRQ), it cannot be configured for ACPI (i.e. SCI). Thus, this change updates the GPIO configuration for GPP_C12 to PAD_CFG_GPI_GPIO_DRIVER and device tree entry for PENH device to use WAKEUP_ROUTE_GPIO_IRQ. Additionally, the signal is marked as active low in the device tree entry to indicate to the kernel driver that the signal is inverted. Not dual routing the signal results in wake source not being added to eventlog when pen removal results in wake from S0ix. BUG=b:160752604 BRANCH=dedede TEST=Build and check behavior is expected. Signed-off-by: rasheed.hsueh <rasheed.hsueh@lcfc.corp-partner.google.com> Change-Id: I74a17088da64c22ef1c74d201c80274fc65a44c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21soc/intel/xeon_sp/skx: Properly set up MTRR'sArthur Heymans
Don't depend on the MTRR setup left over from FSP-M ExitTempRam. Change-Id: I299123b3cd3c37b4345102c20fda77bf261892a2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-12-21soc/intel/xeon_sp: Fix compiling with CONFIG_DEBUG_RESOURCESArthur Heymans
Change-Id: I42ddea2c04bf1ecb2466db3d56d15d51bda486c8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2020-12-21mb/prodrive/hermes: Enable S3/S4 resumePatrick Rudolph
Change-Id: I75f83bcc6c65a048e87f7295a66526eb384afc5d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48692 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-12-21mb/intel/shadowmountain: Add Intel Pre-CEP shadowmountain boardV Sowmya
This patch adds initial support for Alderlake Intel Pre-CEP board called shadowmountain. BUG=b:175808146 TEST=util/abuild/abuild -p none -t intel/shadowmountain -a -c max Change-Id: I9cb650c88986badd6733b001d6f2a0e338421829 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-21volteer/variants/eldrid: Enable RTD3 for the NVMe deviceNick Chen
Enable Runtime D3 for the volteer variants that have GPIO power control of the NVMe device attached to PCIe Root Port 9. Enable the GPIO for power control for variants that do not already have it configured to allow the power to be disabled in D3 state. BUG=b:161270810 TEST=tested on eldrid Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com> Change-Id: I941c8a9bb3221ad90528c323cd0f267dc77d2af3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-21soc/intel/common/block/acpi: Add soc MADT IOAPIC hookMarc Jones
Add a hook for SOCs to provide an IOAPIC MADT table. If the SOC doesn't provide a table then a standard setting is used. Change-Id: Ic818a634e4912d88ef93971deb4da5ab708c9020 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-21soc/amd/picasso: Add UPDs for support eDP phy tunning adjustChris Wang
Add UPDs for eDP phy tunning adjust BUG=b:171269338 BRANCH=zork TEST=Build, verify the parameter pass to picasso-fsp Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Change-Id: I6df063f828447841ac9a6dba00a4aad2001f04df Reviewed-on: https://review.coreboot.org/c/coreboot/+/48731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-12-21soc/intel/common/block/acpi: Make calculate_power() globalMarc Jones
Change static calculate_power() function to global and update the name to common_calculate_power_ratio() for SOC ACPI code use. Change-Id: I0e2d118ad52b36859bfc6029b7dee946193841f4 Signed-off-by: Marc Jones <marcjones@sysproconsulting.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
2020-12-21drivers/intel/fsp2_0: recreate FSP targets on config changeMichael Niewöhner
When a different FSP binary was chosen in menuconfig, the split fd files do not get updated. Thus, make them depend on `.config` to trigger a rebuild when the config changes. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I54739eae50fa1a47bf8f3fe2e79334bc7f7ac3d6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-21Revert "mb/google/dedede: Update Imon slope and Offset Value for Drawcia"Maulik V Vaghela
Falling back to default values for Imon slope and offset for Drawcia This is as per recommendation from ODM based on calibration This reverts commit 2ac88f2347352c5dff0af18d5130dbdd6f032930. BUG=b:175629526 BRANCH=dedede TEST=Debug FSP confirms that values are reverted to default Change-Id: I605acdcd0de2c5dfc28af2aea8cefc6b629c0925 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48737 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/dedede: Add GPIO to galtic supportFrankChu
Add support for gpio driver for galtic BUG=b:170913840 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I01bb95545705efab1a2adf1582b6293fd89e6420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48684 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-21mb/google/dedede/var/madoo: Configure Acoustic noise mitigation UPDsDtrain Hsu
Enable Acoustic noise mitigation for madoo and set slew rate to 1/8 which is calibrated value for the board. Other values like PreWake, Rampup and RampDown are 0 by default. BUG=b:173765599 BRANCH=dedede TEST=Correct value is passed to UPD and Acoustic noise test passes. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I968d8d43016e3569835b0a777335fa1d5c135f87 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21mb/google/dedede: Update SPD table for galticFrankChu
galtic memory table as follow: value Vendor Part number 0x00 MICRON MT53E512M32D2NP-046 WT:E 0x00 HYNIX H9HCNNNBKMMLXR-NEE 0x01 MICRON MT53E1G32D2NP-046 WT:A 0x02 HYNIX H9HCNNNCPMMLXR-NEE BUG=b:170913840 BRANCH=none TEST=emerge-dedede coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I30b8fe3f14e1af7bb5760530477f9311c6a4ee62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-12-21zork: update gumboz variantKevin Chiu
gumboz is the dalboz/dirinboz follower. update gumboz variant to align dirinboz settings. BUG=b:174277853,b:173662179 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I80c03d531761c02b68bd127d889c3ace2dd9e99e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48642 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2020-12-20mb/clevo/kbl-u: drop duplicated configuration of UART padsMichael Niewöhner
UART pads already get configured in bootblock by the UART driver in soc code. Thus, drop the duplicated code from the mainboard. Change-Id: I95565a74e19d693a7d5ead81e72592cc4ca2038c Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-12-20mb/clevo/cml-u: drop duplicated configuration of UART padsMichael Niewöhner
UART pads already get configured in bootblock by the UART driver in soc code. Thus, drop the duplicated code from the mainboard. Tested successfully on Clevo L141CU. Change-Id: I05a459b0af79c75c31b1bb26ea1a1a40857ef9bf Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-12-19soc/amd/picasso: move sb_clk_output_48Mhz from acp to fchEric Lai
Move sb_clk_output_48Mhz out of acp. It should be called unconditionally. We may have another device need this clock e.g. superio chip. BUG=b:174121847 BRANCH=zork TEST= build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I30ad6c60066f17cc83e7feb40675610f4853a022 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-18soc/amd/picasso: Add acp_i2s_use_external_48mhz_osc flagEric Lai
If we have use external clock source for I2S, we don't need to enable internal one. Add acp_i2s_use_external_48mhz_osc flag for the project which uses external clock source. BUG=b:174121847 BRANCH=zork TEST= build passed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ica68ee2da5a05231eb6db0218bd0f19907507273 Reviewed-on: https://review.coreboot.org/c/coreboot/+/48637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-18soc/amd/cezanne: add GPIO supportFelix Held
This still uses the common GPIO code that supports setting up SMI/SCI support for the GPIOs in all stages, which will get removed in future patches, so for now the SoC's gpio.c needs to be included in all stages. Change-Id: I6c12d1d6c605b7eb063eef62a1f71860f602f8dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48565 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-18soc/amd/cezanne: Add SMI supportZheng Bao
Change-Id: I83b9a91cbab297d032292997a4d5768b89fe97dd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48645 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-18vc/intel/fsp/fsp2_0/alderlake: Update FSP header file version to 1512_11Subrata Banik
List of changes: FSP-S Header: - Adjust UPD Offset for Reservedxx - Rename UPD Offset UnusedUpdSpace44 -> UnusedUpdSpace45 Change-Id: If0c18cbb556fc41786391464b76d7c9cc19eab0d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48695 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-12-17azalia: Use `azalia_enter_reset` functionAngel Pons
Also tidy up some adjacent comments. Change-Id: I2e881900a52e42ab3f43ffe96cfbdcc63ff02e23 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-17soc/intel/common/hda_verb.c: Clarify mask usageAngel Pons
The `azalia_set_bits` will mask out all bits, so just use zero for clarity. The resulting behavior is the same in both cases. Change-Id: I27777f1e836fa973859629d48964060bec02c87a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-17soc/intel/skylake: Drop duplicate PmConfigPciClockRun configurationBenjamin Doron
coreboot already unconditionally enables CLKRUN_EN in SoC common code. Tested on an out-of-tree Acer Aspire VN7-572G, PCCTL[CLKRUN_EN] of LPC is still enabled. Change-Id: I65e85015bdd0f766ca8021a3d4c0b0d799f0ccc5 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48325 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-17soc/amd/cezanne: add GPIO definitionsFelix Held
Change-Id: I67930267a89ba0c64ec7e40e2bfa30a0618d104b Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48564 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-12-17azalia: Use `azalia_exit_reset` functionAngel Pons
Change-Id: I346040eb6531dac6c066a96cd73033aa17f026d0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48356 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-12-17device/azalia_device.c: Add codec reset helpersAngel Pons
Many uses of `azalia_set_bits` are used to toggle the reset bit. To avoid having to repeat the register operations and the corresponding comment, create two helpers with self-explanatory names. They will be put to use in subsequent commits, with one change for each function. Change-Id: If0594fdaf99319f08a2e272cd37958f0f216e654 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17device/azalia_device.c: Clarify commentAngel Pons
The `4` here doesn't have to do with the size of u32. Instead, it is because the verb header contains the number of jacks, which is the number of four-verb groups. Change-Id: I3956ce5ec2a7abc29982504cf75b262a1c098af5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48352 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Replace `hda_find_verb` usesAngel Pons
This function is equivalent to `azalia_find_verb` in its current form, so replace them. Also, adapt and move the function description comment. Change-Id: I40d1e634c31b00bd7808a651990d9bd6f0d054e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `azalia_find_verb` parametricAngel Pons
Allow to specify which table should the verb list be read from. Change-Id: Id1bc40c4364cda848f416bad9eeab1b8ca3e9512 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Drop unused parameter from `azalia_find_verb`Angel Pons
The `dev` parameter isn't used anywhere. Change-Id: I05643f8201137ffe89ded1e3f989c5a0f04e0af1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `find_verb` function non-staticAngel Pons
To allow dropping copies of this function, make it non-static. Also, rename it to `azalia_find_verb` as the function is now globally visible. Finally, replace the copies in chipset code with `azalia_find_verb`. Change-Id: Ie66323b2c62139e86d3d7e003f6653a3def7b5f2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17device/azalia_device.c: Remove debug printsAngel Pons
The other five copies of this function in the tree do not have these debug prints. Remove them from here for consistency. Note that this information is already printed elsewhere, so nothing is being lost. Change-Id: I999032af1628bf8d66a057dc72368f02ef6eb8d1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17azalia: Make `set_bits` function non-staticAngel Pons
There's many copies of this function in the tree. Make the copy in azalia_device.c non-static and rename it to `azalia_set_bits`, then replace all other copies with it. Since azalia_device.c is only built when AZALIA_PLUGIN_SUPPORT is selected, select it where necessary. This has the side-effect of building hda_verb.c from the mainboard directory. If this patch happens to break audio on a mainboard, it's because its hda_verb.c was always wrong but wasn't being compiled. Change-Id: Iff3520131ec7bc8554612969e3a2fe9cdbc9305e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-12-17mb/intel/coffeelake_rvp: Stop using headers for HDA verbsAngel Pons
One of the variants lacks an hda_verb.h, and hda_verb.c can't be built. Follow-up changes will make mainboard hda_verb.c files always get built through AZALIA_PLUGIN_SUPPORT, and breaks building this contraption. Turn the headers into standalone compilation units to prevent this issue. Since they contain definitions, including them from multiple compilation units wasn't a good idea anyway. Change-Id: I00d968563539a4e1b8d1e12145293439d8358555 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48360 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-17mb/google/zork: update USB 2.0 controller Lane Parameter for morphiusKevin Chiu
from AMD USB phy specialist recommended that TXVREFTUNE0 shouldn't over 0xD (the maximum) in order to have enough room to accomdate a safe disconnect threshhold in COMPDISTUNE0. TXVREFTUNE0: 0xf -> 0xd BUG=b:172687208 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ia104454d95e5e8d6a212c97fb09d61125945eeea Reviewed-on: https://review.coreboot.org/c/coreboot/+/48653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-17arch/arm: Replace .id section with build_info in CBFSKyösti Mälkki
For arch/arm[64], the offsets to board identification strings and CONFIG_ROM_SIZE inside .id were never really used; it was only a convenience to have the strings appear near the start of image. Add the same strings in an uncompressed file in CBFS. Change-Id: I35d3312336e9c66d657d2ca619cf30fd79e18fd4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47602 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-17arch/ppc64: Remove .id section in bootblockKyösti Mälkki
The strings in .id are expected to match the build for the purpose of identifying the binary image. There is no identified use for the offsets. The files id.ld and prologue.inc were unused. Change-Id: Ida332671e0ace3f6afd11020474ffda04614bad5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-12-17arch/x86: Remove ID_SECTION_OFFSETKyösti Mälkki
The location is hardcoded inside flashrom and FILO. Only two offsets are supported, 0x10 and 0x80. Change-Id: I8348f2ac0cab969ab78ecb50a55de486eee0cf9b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47598 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-17mb/intel/adlrvp: Enable PCIEXP_HOTPLUG for TCSS TBT/USB4 portsV Sowmya
This change enables PCIEXP_HOTPLUG to support resource allocation for TCSS TBT/USB4 ports. Referred from TGLRVP -> https://review.coreboot.org/c/coreboot/+/41543 Change-Id: I5f883dac0d7e5fa84ad2e1683f84c933a90cea51 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-12-17mb/google/guybrush: Add new mainboardMathew King
Guybrush is a new Google mainboard with an AMD SOC. BUG=b:175143925 TEST=builds Change-Id: I1792f21ff7616f364ddc8b0c04481049b2a5fb04 Signed-off-by: Mathew King <mathewk@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48479 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-17soc/intel/cannonlake: Change mainboard_silicon_init_params argumentPatrick Rudolph
Use FSPS_UPD instead of FSP_S_CONFIG as argument as already done on xeon_sp and denverton_ns. This allows to set test config UPDs from mainboard code as well. Change-Id: I6d67264e22df32b9210ce88b99d6a7a4f6b97ffb Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48644 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-12-17drivers: Replace set_vbe_mode_info_validPatrick Rudolph
Currently it's not possible to add multiple graphics driver into one coreboot image. This patch series will fix this issue by providing a single API that multiple graphics driver can use. This is required for platforms that have two graphic cards, but different graphic drivers, like Intel+Aspeed on server platforms or Intel+Nvidia on consumer notebooks. The goal is to remove duplicated fill_fb_framebuffer(), the advertisment of multiple indepent framebuffers in coreboot tables, and better runtime/build time graphic configuration options. Replace set_vbe_mode_info_valid with fb_add_framebuffer_info or fb_new_framebuffer_info_from_edid. Change-Id: I95d1d62385a201c68c6c2527c023ad2292a235c5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-12-17mb/google/zork: Add GPIO to Shuboz supportKane Chen
1. AGPIO5 to NC 2. EGPIO141 to NC 3. EGPIO144 to NC BUG=b:174528384 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I51f291476e01982e1a3f92cd1b338a528434112d Reviewed-on: https://review.coreboot.org/c/coreboot/+/48002 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-16soc/amd/picasso: Fix the typo in GPIO defineZheng Bao
Change-Id: I8c9eed5d0e320b02382c24304a44e51e89eb6ac5 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-16soc/intel/xeon_sp: Move DMICTL lockArthur Heymans
On SKX FSP-M does not return if this is set too early. Tested on OCP/Tiogapass, boots. Change-Id: Ib8ef7bab36bfd4b62988768753d10b4d7b7d567f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48657 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-16mb/ocp/tiogapass/devicetree.cb: Add P2SB deviceArthur Heymans
This fixes ocp/tiagopass not booting as after FSP-S the P2SB is accessed to read out or reconfigure the HPET and PCH IOAPIC BDF. Change-Id: Ia37bd0f14627980345cd07f20e935a10d4760b69 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48654 Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-16soc/amd/common/gpio_banks: Drop underscore in __gpioKyösti Mälkki
The local function names were chosen such that they don't collide with <gpio.h> so the prefix is unnecessary. Change-Id: I4799a6d6b87e8081324d88b0773e61cbda0d4cfb Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-12-16soc/mediatek/mt8192: Do the dramc pinmux selectionHuayang Duan
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I7bc1971646a65db8eef5eb5223c919645c6e8ed9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-12-16arch/x86: Link gdt_init.S into bootblockKyösti Mälkki
Followup work forces gdtptr and gdt towards the top of bootblock. They need to be realmode-addressable, i.e. within top 64 KiB or same segment with .reset. Change-Id: Ib6f23b2808d0a7e0d277d00a9b0f30c49fdefdd5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:05:14 +0000