| Age | Commit message (Collapse) | Author |
|---|
|
This commit updates the port select bit definitions for the
TRANS_DDI_FUNC_CTL registers in the Intel GMA driver to accommodate
the changes introduced since TGL SoC.
Specifically, the following changes were made:
- Updated the DDI select bit definitions from 3-bits (bit 28-30) to
4-bits (bit 27-30).
- Introduces `INTEL_GMA_VERSION_2` config to accommodate the port and
pipe related differences between previous generation GMA register
(TRANS_DDI_FUNC_CTL) to the current generation GMA register.
This commit backports the change from the following upstream patch:
https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-3-
lucas.demarchi@intel.com
BUG=b:299137940
TEST=Able to build and boot google/rex.
Change-Id: I815ffa90c2e235afd70baa7e3837e1f9af89b1b0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Set USB port which corresponds PORTSCN/PORTSCXUSB3 register bits for
enable USB wake.
BUG=b:302230434
TEST=Verify USB-A device could wake up Boxy
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I0f6300dc6bbb6fb8226151e49e38f0450b1e71b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78144
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set USB port which corresponds PORTSCN/PORTSCXUSB3 register bits for enable USB wake.
The physical USB slot is 6, USB2 port5 for Bluetooth, total USB2 port num is 7, USB3 keep 6.
BUG=b:300844110
TEST=Verify USB-A device could wake up Taranza
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: Ied92c4a70bc594bd189dcb942f1a445412509464
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78068
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Use the common UWES ACPI method to enable wake from USB. The only
difference to other SoCs is that JSL only has 8 USB2 ports, so the USB3
PORTSC register offset is different.
BUG=b:300844110
TEST=When enabled on taranza, all USB2 and USB3 ports can wake from
suspend
Change-Id: Ibc90246965d5d809123e954847543d28d78498a5
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78086
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
The ACPI methods for enabling USB wake are identical on ADL, CNL and
SKL. Move them to a common ASL file so they can be reused more easily
on other SoCs.
Also move the USB_PORT_WAKE_ENABLE macro used to create enable bitmasks
in devicetree to a common header.
BUG=b:300844110
TEST=Use abuild to build kinox, puff, and fizz with and without this
change. Check the generated dsdt.aml is unchanged.
Change-Id: Iabdfe2bece7fafc284ddf04382f1bbcacc370cce
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This panel is never actually enabled on Geralt. The derived project
won't use this panel either. Therefore, remove this panel support.
BUG=none
BRANCH=none
TEST=emerge-geralt coreboot
Change-Id: I97ed5b341724ed42098b2c17d0eb75eab881dbb1
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The tolerance of ADC voltage table is too small. Update the table values
accordring to the suggestion from the hardware team. The patch is
prepared for the derived projects. There is no actual issue now.
BRANCH=none
BUG=b:301908091
TEST=check firmware screen
Change-Id: I3bde30b6bbe79c81e276f23f4110715c3278d42c
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add VCM power control to configure 2.8V and reset pin, and VCM can
be powered on/off properly.
BUG=b:292907385
TEST=Run ITS test
Change-Id: I242025836fd50076a40ffcc4e5d4a5d5bc6fb4d0
Signed-off-by: Serin Yeh <serin.yeh@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78170
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Certain devices are enabled in Alder Lakes chipset.cb, so remove
them from the devicetree.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I929af0bed6c2e1024b4787424a8fe466edce5a36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78198
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1b0052b569b575fec7893322dec0280c9f1ed79f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78197
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating FSP to v4301.01 caused a strange flicker when connecting
an external display. Update the VBT to 251 from 242 with the exact
same settings to resolve this.
Change-Id: I36bb2cc92e744e761ec6af9c026c429373c1750a
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Simplify the Q events for the battery and charger to just notify
when a status has changed. The EC will trigger these events when
either has changed.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3300be5254549fe5cd3b3490d9191240c6d36b6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77405
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPL_TABLE_FILE and SPL_RW_AB_TABLE_FILE Kconfig options provide a
way to override the default SPL file configured in the SoC's fw.cfg file
by passing the '--spl-table' parameter to amdfwtool which will then use
the override instead of the SPL file from the fw.cfg file. When
SPL*_TABLE_FILE is an empty string, the corresponding add_opt_prefix
call in the makefile will result in no '--spl-table' parameter being
passed to amdfwtool, so it'll use the default SPL file from fw.cfg. In
order to not pass an SPL override by default, remove the default from
the SPL_TABLE_FILE in the SoC's Kconfig. The SoC default pointed to the
same SPL file as in fw.cfg file anyway. Now only when a mainboard sets
this option to point to a file, that file will be used as an override.
This override is used to include a special SPL file needed for the
verstage on PSP case on the Chromebooks. Since SPL_TABLE_FILE is an
empty string by default, neither the SPL_TABLE_FILE Kconfig option nor
it being evaluated in the Makefile need to be guarded by HAVE_SPL_FILE,
so remove the dependency in the Kconfig and the ifeq in the Makefile.
Before this patch, the HAVE_SPL_FILE option controlled two things that
shouldn't be controlled by the same Kconfig option: Only when
HAVE_SPL_FILE was set to y, the SPL_TABLE_FILE override was taken into
account, and it also controls if spl_fuse.c got added to the build which
when added will send the SPL fusing command to the PSP. So the case of
needing an SPL file override, but not updating the SPL fuses wasn't
supported before.
The SPL file in the amdfw part will be used by the PSP bootloader for
the anti-rollback feature which makes sure that the SPL file version
isn't lower than what is in the SPL fuses. For this the SPL file needs
to be present in the PSP directory table. The SPL version check happens
way before we're running code on the x86 cores. The SPL fusing PSP
command that can be sent by coreboot will tell the PSP to update the SPL
fuses so that the fused minimal SPL version will be updated to the
current SPL version.
Since the former HAVE_SPL_FILE option now only controls if the SPL
fusing command will be sent to the PSP mailbox, rename it to
PERFORM_SPL_FUSING to clarify what this will do and update the help text
correctly describe what this does.
TEST=With INCLUDE_CONFIG_FILE set to n, timeless builds for both Birman
with Phoenix APU and Skyrim result in identical binaries.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6cec1f1b285fe48e81a961414fbc9978fa1003cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78178
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During CSE firmware downgrade, data is cleared. To preserve PSR data
during downgrade, it needs to be backed up. Select
SOC_INTEL_CSE_LITE_PSR config to ensure PSR backup related flow is
executed on CSE Lite SKU.
BRANCH=None
BUG=b:273207144
TEST=Verify CSE firmware upgrade/downgrade on rex.
Change-Id: I39af029a5f0c018a5db3ac68191764abfa9518ac
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76115
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds eventlog entries for the below scenarios:
1. To indicate success or failure of PSR data back-up command
2. To indicate the loss of PSR data when CSE update is corrupted, and
data clear command is issued to clear the data.
3. To indicate the loss of PSR data when CSE boot partition info
response is corrupted and data back-up is not initiated.
BRANCH=None
BUG=b:273207144
TEST=Verify elog event added after PSR data backup command is sent
cse_lite: PSR_HECI_FW_DOWNGRADE_BACKUP command sent
...
ELOG: Event(B9) added with size 10 at 2023-06-27 06:44:49 UTC
Change-Id: I2459a2b941d28a87b6c78f75dbe8779d73328d7a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Get PSR bit state using MKHI_FWCAPS_GET_FW_FEATURE_STATE HECI command
Use this bit info to check if SKU supports PSR and consequently issue
PSR_HECI_FW_DOWNGRADE_BACKUP command for PSR data backup during
downgrade.
BUG=b:273207144
TEST=build CB image and boot on google/rex board. Check for
"PSR is supported in this SKU" message in coreboot logs to confirm
that PSR bit is set in SKU
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I6e92341a9dc799146eb8f1a70b3a4a16fd1aa0ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
During CSE FW downgrade we erase CSE data. This would result in
Platform Service Record(PSR) data also to be erased.
To avoid losing PSR data we need to make a backup before data clear.
This patch sends PSR_HECI_FW_DOWNGRADE_BACKUP HECI command to CSE,
informing the CSE to backup PSR data before a data clear operation
during downgrade.
CMOS memory is used to track the backup status. PENDING is the default
state, it is updated to DONE once PSR_HECI_FW_DOWNGRADE_BACKUP HECI
command is sent.
PSR data can be backed up only post DRAM is initialized. The idea is to
perform cse_fw_sync actions in ramstage when PSR is enabled on a
platform. As part of the cse_fw_sync actions, when a firmware downgrade
is requested the command to back-up data is sent. Once the backup has
been done, trigger the firmware downgrade.
BRANCH=None
BUG=b:273207144
TEST=build CB image for google/rex board and check PSR backup command
is being sent during a CSE FW downgrade. Also check PSR data is not
lost/erased after a downgrade using intel PSR tool.
Change-Id: I135d197b5df0a20def823fe615860b5ead4391f8
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74577
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data. Since firmware downgrade
and PSR data backup flows involve global resets, there is a need to
track the PSR data backup status across resets. So adding a CMOS
variable for the same.
This patch implements API to access PSR backup status stored in CMOS.
The get API allows to retrieve the PSR backup status from CMOS memory.
The update API allows to update the PSR backup status in CMOS.
BRANCH=None
BUG=b:273207144
TEST=Able to retrieve PSR backup status across resets.
Change-Id: I270894e3e08dd50ca88e5402b59c211d7e693d14
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77069
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
CSE firmware downgrade and PSR data backup flows involve global resets,
there is a need to track the PSR data backup status across resets. In
the subsequent patches, a CMOS structure to store PSR back-up status
will be added.
The current SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSET of 68 can only store
cse_specific_info, as ramtop is at offset 100 and PSR back-up status
structure will not be able to fit within the range.
This patch overrides the SOC_INTEL_CSE_FW_PARTITION_CMOS_OFFSET to 161
to accommodate all CSE related info in adjacent CMOS memory.
BUG=b:273207144
TEST=Verify CSE RW FW versions are stored in CMOS memory in rex.
Change-Id: I8bae5245f93b99be15b4e59cfeffbc23eec95001
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78054
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Platform Service Record(PSR) will be enabled on Meteor Lake
platforms. cse_fw_sync actions happen in ramstage when PSR is enabled.
To avoid the boot time penalty of sending the cse_get_bp_info in
ramstage, call cse_fill_bp_info to get cse_bp_info response early in
romstage and store in cbmem. This data can be later used in ramstage.
BUG=b:273207144
TEST=Verify cse_bp_info is filled in romstage in rex.
Change-Id: Ic0e8fb34f21ff07e182a7b848d38e9d329010028
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data, and this command can be
sent only in post-RAM stages. So the cse_fw_sync actions needs to be
moved to ramstage.
Sending cse_get_bp_info command in ramstage takes additional boot time
of ~45-55ms on rex. To avoid the boot time penalty, this patch provides
an API to get the cse_bp_info in early romstage. The response data is
then migrated to cbmem once memory is initialized. The same data in
cbmem can be utilized in ramstage to perform other cse_fw_sync actions.
This patch also adds check to validate cse_bp_info in cbmem and avoids
sending the command again if the data is valid.
BUG=b:273207144
TEST=Verify the command works in early romstage, data is migrated to
cbmem and valid data is available in ramstage on rex.
Change-Id: Ib1e72c950ba0f4911924805f501ec1bd54b6ba3c
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78053
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add probe fw_config to USB C1/A0 port on daught_board for DB_1A sku.
BUG=b:294456574
TEST=emerge-nissa coreboot
Change-Id: I2261b0e4d2b673b6186a435cce8dc6a4ccacb0a7
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I1439f785cb9ceeefab9d24caa88e35bd43f68315
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78126
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I5ff9170ac6a3f50830a707dacf4f941587e531ef
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75076
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Iface0fd1d44649c6d9773940818e028e3d3a4292
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I5a321680b1b84ca0b2598d2446ff10257947a733
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75083
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I80bd87aa2f97da74a1bbcf05b16f0d5980e142f2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I6b71c7c5c9e32e21c757c0ed0e9c6bd9d58a4f75
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78131
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I6a78efa4be2ee34e7dac06a8b8014da12b21fbdc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I817faab0438a35d2e8859342e7c2b2dbaa0afeeb
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78129
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Iec0829ba80d3d4b4bc79e14a97d085930c4c5202
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78128
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: If6b666478e15a8e843b50b60be490593349240bd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78132
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Now that Intel has publicly released FSP headers/binaries for
RaptorLake-P/S client platforms, set the defaults accordingly if
FSP_USE_REPO is not selected. This does not change any existing
defaults as the RaptorLake headers in vendorcode are only used when
FSP_USE_REPO is not set.
TEST=build/boot google/brya (osiris)
Change-Id: Ida92d269fcaf6f323599ec174f4dcedbbe65f03c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78190
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I5527d5968be35f52b912d9d6e1d9f46f24569bbc
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Ic199a60013ceedfd15b191a5fe707be6654ad3a2
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75078
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
During suspend, the ISH I2C transactions cannot go through
because the GPIO pads remain the pervious value.
The IO Standby State (IOSSTATE) needs to be changed to keep I2C bus
active and functional during suspend.
BUG=b:302612549
TEST=on Google/rex platform with ISH enabled, do suspend_stress_test
and check that no i2c failure.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I9a2c902ed56461f3a535428db399c2050756f2da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78179
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Li1 Feng <li1.feng@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set default to enabled for hibernate on setup failure for all devices
using a Google EC. This will have no impact on devices that don't
bring the GSC down on hibernate, but will provide a recovery path
for all devices that do.
BUG=b:296439237
TEST=Force error on Skyrim with custom build, boot normally with
normal build
Change-Id: I2d9e8f75b25fb6c530a333024c342bea871eb85d
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78098
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Librem 11's volume keys act as a PS/2 keyboard with only those two
keys. Reduce the minimum number of top-row keys to 2. Make the
"rest of keys" (alphanumerics, punctuation, etc.) optional.
Change-Id: Idf80b184ec816043138750ee0a869b23f1e6dcf2
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78095
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Separate these so a mainboard can describe a PS/2 keyboard without a
PS/2 mouse or vice-versa.
Librem 11 has a PS/2 keyboard for the volume keys, but does not have a
PS/2 mouse, and the presence of a mouse device can cause the cursor to
appear on the desktop incorrectly.
ps2_controller.asl remains since many boards include it, it now just
includes the two new files.
Change-Id: I13a4c2caf8dc9e5004b775dc0a9ac2488e39f184
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78096
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Simplify the code a bit by returning 0 early in the function when the
SYSCFG_MSR_SMEE bit isn't set.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7536b82d98e55c51105448090d1206e1ed7f62d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78176
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of having the get_usable_physical_address_bits function that
only got used in the data fabric domain resource reporting code, drop
this function, select RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT in the
common AMD non-CAR CPU and rename get_sme_reserved_address_bits to
get_reserved_phys_addr_bits so that the common cpu_phys_address_size
function will return the correct number of usable physical address bits
which now can be used everywhere. The common AMD CAR CPU support is only
selected by Stoneyridge which doesn't support secure memory encryption,
so RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT isn't selected by the
SOC_AMD_COMMON_BLOCK_CAR Kconfig option.
Before only the MMIO region reporting took the reserved physical address
bits into account, but now also the MTRR calculation will take those
reserved bits into account. See the AMD64 Programmers Manual volume 2
(document number 24593) for details. Chapter 7.10.5 from revision 3.41
of this document was used as a reference. The MTRR handling code in
older Linux kernels complains when the upper reserved bits in the MTRR
mask weren't set, but sets them after complaining and then continues to
boot. This issue is no longer present in version 6.5 of the Linux
kernel.
The calculation of the TSEG mask however still needs to take all
physical bits into account, including the ones reserved for the memory
encryption. When not setting the reserved bits in the TSEG mask, the
Mandolin board with a Picasso APU won't boot to the OS any more due to
not returning from SeaBIOS calling into the VBIOS. Haven't root-caused
what exactly causes this breakage, but I think previously when something
else was wrong with the SMM initialization, also something went wrong
when calling into the VBIOS.
TEST=Ubuntu 2023.10 nightly build boots on Mandolin via SeaBIOS and EDK2
and Windows 10 boots on it via EDK2.
TEST=On Ubuntu 2022.04 LTS, the kernel complained with the following
warning, but it still continues the boot process as described above:
mtrr: your BIOS has configured an incorrect mask, fixing it.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iad65144006f1116cd82efc3c94e1d6d1ccb31b6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
In the cpuid helper functions eax is always written to
by the cpuid instruction, so add it to the output clobbered list.
This prevents GCC from generating code with undefined behaviour
when the function is inlined.
Test: Verified that the generated assembly is sane and runtime
tests showed no "strange" behaviour when calling cpuid
functions.
Change-Id: I5dc0bb620184a355716b9c8d4206d55554b41ab9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78192
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
BOARD_SPECIFIC_OPTIONS is duplicate to BOARD_GOOGLE_CORSOLA_COMMON.
Thus, move all selects to the latter option.
Change-Id: I498c6671b2dfc72820fc522744af7ce3b0a62930
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Configure the SCP to operate within domain 8, allowing it to access
only the necessary registers. Any unauthorized access will be prevented
by the DAPC.
- Set SCP domain from domain 0 to domain 8.
- Lock register settings down to prevent unexpected modification.
BUG=b:270657858
TEST=scp bootup successful with dapc settings
Change-Id: I049486c997542d91bd468e0f4662eafbca4c17e0
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77883
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Currently, all the masters controlled by DAPC are in domain 0. With
this setting, there is a potential security problem. For example, if a
certain master is somehow hacked, it may attempt to access registers
that it is not supposed to, with successful results. This is due to the
fact that, in the current setting, all masters are in domain 0 and can
access almost all registers. To prevent this problem, we assign masters
to different domains and restrict access to registers based on each
domain.
This patch sets domains for masters:
SSPM - domain 3
CPUEB - domain 14
PCIE0 - domain 2
SPM - domain 9
Change-Id: Ie3e1d5055e72824257b66d6257982652eeb05953
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77862
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently, all the masters controlled by DAPC are in domain 0. With
this setting, there is a potential security problem. For example, if a
certain master is somehow hacked, it may attempt to access registers
that it is not supposed to, with successful results. This is due to the
fact that, in the current setting, all masters are in domain 0 and can
access almost all registers. To prevent this problem, we assign masters
to different domains and restrict access to registers based on each
domain.
This patch updates the permission settings for domains 2, 3, 4, 5, 7,
8, 9, and 14, as these domains will be assigned masters in the upcoming
patch.
BUG=b:270657858
TEST=build pass
Change-Id: I6e95ddb5d84a09ff865d7615596430e25b69d3fc
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77861
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Since also some AMD CPUs have reserved physical address bits that can't
be used as normal address bits, introduce the
RESERVED_PHYSICAL_ADDRESS_BITS_SUPPORT Kconfig option which gets
selected by CPU_INTEL_COMMON, and use the new common option to configure
if the specific SoC/CPU code implements get_reserved_phys_addr_bits or
if the default of this returning 0 is used instead.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0059e63a160e60ddee280635bba72d363deca7f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78073
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The number of physical address bits and reserved address bits shouldn't
ever be negative, so change the return type of cpu_phys_address_size,
get_reserved_phys_addr_bits, and get_tme_keyid_bits from int to unsigned
int.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9e67db6bf0c38f743b50e7273449cc028de13a8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78072
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
ASPM on the WLAN PCIe bus introduces large latency spikes, which can be
measured with cyclictest:
$ cyclictest --policy=rr --priority=12 --interval=10000 --threads=1 --loops=6000
Disabling ASPM for WLAN reduces the latency spikes from 2,500-3,000 usec
down to 35-65 usec. These latency spikes can impact the user when
real-time processes like Audio (cras) are starved of CPU time, leading
to buffer underruns resulting in crackling/distorted audio.
ASPM is already disabled for Nipperkin devices (CB:63537), so this CL
disables it for both in the shared declaration of
guybrush_czn_dxio_descriptors.
Power impact for Dewatt:
* ASPM enabled
power_VideoCall.FDO_25min_webrtc
w_energy_rate 7.425043688811071
power_Idle.default20min
wh_energy_used 1.4164200000000022
* ASPM disabled
power_VideoCall.FDO_25min_webrtc
w_energy_rate 8.779998551703423
power_Idle.default20min
wh_energy_used 1.4860800000000012
When using Google Meet over WiFi, power increases by ~1.5W.
BUG=b:297970318
TEST=cyclictest --policy=rr --priority=12 --interval=10000 --threads=1 --loops=6000
Change-Id: I16940987d598943bd5d6ace8b4008eba4d4a177c
Signed-off-by: Tim Van Patten <timvp@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77963
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Implement support for elan i2c touchscreen and use fw_config
to pick between i2c or HID-over-i2c touchscreen.
Support G2 TS have different slave address by fw_config
BUG=b:295272539
BRANCH=firmware-nissa-15217.B
TEST=build and verified touchscreen work
Change-Id: I5e3f85106606d84e1cfa204e62b7b2662db6546b
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Change-Id: I28a90c236e17d1ea15f5416fab8be7360494e92e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove comment on PLD horizontal position as ACPI spec 6.5 define that
field:
https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html?highlight=pld%20horizontal#buffer-0-return-value
Change-Id: I228e0780699c223f1e3227fd45ec094e0c46205e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. The PSR data
needs to be preserved across the firmware downgrade flow. CSE Lite SKU
firmware supports command to backup PSR data, and this command can be
sent only in post-RAM stages. So the cse_fw_sync actions needs to be
moved to ramstage.
This patch ensures SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE is selected when
PSR is enabled.
BUG=b:273207144
Change-Id: I7c9bf8b8606cf68ec798ff35129e92cd60bbb137
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78055
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable hibernate on TPM setup error for Skyrim devices.
BUG=b:296439237
TEST=Force the error by hard coding the return code and observe the
device entering hibernate.
BRANCH=None
Change-Id: Ibf96b830f07dac98035d3152c8ec220685a912bc
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77668
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional failure mode logic for the TPM to enable an
automated recovery mode for GSC hangs.
BUG=b:296439237
TEST=Force the error by hard coding the return code and observe the
device entering hibernate.
BRANCH=None
Change-Id: Ieec7e9227d538130354dea8b772d0306cdda1237
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77667
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional failure mode reporting to the TPM driver to provide
additional visibility into what failures are occurring.
BUG=b:296439237
TEST=Verify code paths on Skyrim, ensure behavior is unchanged.
BRANCH=None
Change-Id: I77a653201acf1bddc1ed1e2af701c8d3dd4f0606
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77491
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
Convert TPM functions to return TPM error codes(referred to as
tpm_result_t) values to match the TCG standard.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: Ifdf9ff6c2a1f9b938dbb04d245799391115eb6b1
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77666
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert hex print values to use the %#x qualifier to print 0x{value}.
BUG=b:296439237
TEST=build and boot to Skyrim
BRANCH=None
Change-Id: I0d1ac4b920530635fb758c5165a6a99c11b414c8
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78183
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I70db8bf9f553fa9bfd2a5c20a1393119786047f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifb4d7dda5fcf1ccacb901b24e4f7cf6945ee16e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76503
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All verified with PPR.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: If288079310ba74333f04173978f6a123ce95f4d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: Ie1ae2ba4d4833570ca0621023bdeed67ccabe5cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76501
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I5d5d3ff27ab0953844f9bbef30b6487fb480e29b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76500
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Only the lower half of the flash gets memory mapped below 4G in the
current setup.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: Iffe5c17a50f3254411a4847c7e635ce0fd282fde
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76499
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TESTED: AMD onyx reaches x86 code
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Varshit Pandya <pandyavarshit@gmail.com>
Change-Id: I95d84f93663a80f322fd4d7cdeb35ccfe0ec7d21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76498
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure PL1 and PL2 are configured for powerformance.
Based on values from Intel Meteor Lake UH Power Map document ID:640982
BUG=b:286834207
TEST=Build and boot google/ovis and check ACPI SSDT for DPTF entries
Change-Id: Ia40884b3abd1417dea6ad291de4845762ee01966
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77623
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6c9879a9f06f81d577bc09f6001158d7f9326362
Signed-off-by: vbpandya <pandyavarshit@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78082
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Modify the settings:
1)Add fw_config probe on USB type C for "DB_1C_LTE".
2)Add fw_config probe on USB type A for "DB_1A_HDMI".
BUG=b:296791122
TEST=build and check USB functions on craask
Change-Id: I2775098ab380995e62f264bc51a430762c256c4b
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78169
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects LZ4 decompression for logo CBFS file. Able to save
2ms of the boot time when HAVE_FSP_LOGO_SUPPORT config is enabled.
However, the compressed BMP logo size is increased by ~2KB.
Raw BMP Image size is ~97KB.
BUG=b:284799726
TEST=Able to see pre-boot splash screen while booting google/redrix
with 32MB (W25Q256JWEIM) SPI-Flash.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I98e2c9a4f77d0b91f84eda9aec5060b236bd5e94
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78121
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie986c1cbbc9bcc7817dfeb04a4be86898b302987
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Jasper Lake was missing these bases, so attempting to enable an SCI
would poke unrelated registers starting from offset 0. Set them so
GPEs can be enabled.
GPE is used on the Librem 11 for the keyboard dock connector, its sense
signal on GPP_D4 raises a GPE which is used to indicate tablet/laptop
mode to the OS.
The register offsets are documented in the datasheet volume 2 (Intel
document 634545), all groups' GPE_STS/GPE_EN start at the same offsets.
Change-Id: Ib6b9b9a79e9cc4467e609eaf591ec4e87b78d617
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78097
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rather than disabling C State demotions for every single Raptor
Lake board due to an issue with S0ix, regardless of if they even
use S0ix, configure it in the mainboard.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4f941a549bc717ae2f8ec961ead7ac7668347c99
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77087
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Use cpuid_get_max_func instead of open-coding the same functionality in
cpu_check_deterministic_cache_cpuid_supported.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I590f0c840bc62bbd0b5038c5827367d811e30d10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Before the cpuid(0x80000001) read in smbios_write_type4, it was
previously checked in a slightly convoluted way if the result from
cpu_cpuid_extended_level was larger than 0x80000001, but the check
should be if it is larger or equal to 0x80000001.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iabcfdb2b8b90d80baf8f4c4d2fd79f1f44866dc7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78107
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use cpu_cpuid_extended_level instead of open-coding the same
functionality in smbios_write_type4.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8e20726ea17e8ed94d5ff8f6568758fcfa162ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Configure the rcomp, dqs and dq tables based on the schematic.
BUG=b:298337185
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=dochi emerge-brya coreboot
Change-Id: I182e287423e6f784712c5004a6fe2d12a5b36190
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Add PLx from JSL PDG (ID: 613095) in taranza devicetree.
Add ramstage.c in Makefile.inc and update Taranza power limits in
taranza ramstage.c.
BUG=b:296004956
TEST=emerge-dedede coreboot and check psys and PLx value on taranza
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: Id43bb91bc9efb91cb074b075122cce4f22e0716c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Configure I2C5 timing in devicetree to ensure I2C devices
meet timing requirement.
BUG=b:300177424
TEST=Build and check I2C devices timing meet spec.
| | I2C5-Before | I2C5-After |
|-------------|-------------|------------|
| FSMB(KHz) | 445.400 | 343.638 |
| TLOW(us) | 1.543 | 2.068 |
| THIGH(us) | 0.475 | 0.604 |
| THD:STA(us) | 0.603 | 0.711 |
| TSU:STA(us) | 0.612 | 0.611 |
| TSU:STO(us) | 0.605 | 0.611 |
| TBUF(us) | >1.914 | >2.044 |
Change-Id: I3bb678b66d55c6bfaff76e3e5500a2a3bc3a2c61
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78111
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 4th sensor device for DTT tuning.
BUG=b:292134655
TEST=Built and verified DTT tool could monitor the new sensor device
Change-Id: I62f50711af81dfc1566d655f6dcfc66f68dbc794
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I8530bb9b89a12ae831a4716bdec8c66c7f3f74a4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: I73844dc4686dd014ec2209e296cc4aff47280e9f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
BOARD_SPECIFIC_OPTIONS is duplicate to BOARD_GOOGLE_OAK_COMMON.
Thus, move all selects to the latter option.
Change-Id: Id80b8a9bcad9337c8aa76fa6e5d2c9752b8021b7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
BOARD_SPECIFIC_OPTIONS is duplicate to BOARD_GOOGLE_BASEBOARD_GUYBRUSH.
Thus, move all selects to the latter option.
Change-Id: I570c3cfd3d100ad90e35ec5d89686cb6a4bd8e82
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78102
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Currently the HDA device can neither be disabled using softstraps
nor can it be disabled by using FSP UPDs. Add code to disable it in
coreboot when it's marked as 'off' in coreboot's devicetree.
TEST: Device 00:1f.3 is hidden and platform boots into OS without issue.
Change-Id: Ifa1422d653cf81ee6faf2bdda27a471c2084642b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77873
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Facilitates correct profile selection by SOF Windows drivers.
Profiles for nokris and quandiso will be added once correct board
configs can be determined.
TEST=build/boot Win11 on google/craask, verify correct audio profiles
loaded, audio functional.
Change-Id: Id4582b5dd74a4905ea509813ec99663577360095
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
|
|
Enables correct identification of boards using rt5650 codec for either
speaker or headset output (or both) by SOF Windows drivers.
Change-Id: Ied9717955fcfca33bd63a34f3f6961deb045239c
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78092
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On the first boot after flashing, the data read from the FMAP and
stored in vbios_data is not valid, so hashing it produces a value which
will not match on the subsequent boot, requiring an additional boot
before the vbios_data and hash match / before the GOP driver can be
skipped. To fix this, update vbios_data before hashing.
BUG=b:271850970
BRANCH=skyrim
TEST=build/boot google/skyrim with USE_SELECTIVE_GOP_INIT selected,
verify that GOP driver execution is skipping on 2nd boot after flashing
when booting in normal / verified boot mode.
Change-Id: Idc10d752bfa004a34b91307a743c620fb97eeb82
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77727
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This adds support for booting the Librem L1UM v2 mainboard with
coreboot, using binaries from the original BIOS.
The following features have been tested on PureOS:
- USB: front USB3, rear USB3, USB2 header on board
- SATA: 8x SATA ports, one M.2 M-key shared with SATA0
- PCIe: two PEG slots, one PCIe slot from PCH, and one M.2 M-key
- Network: 2x GbE
- Video: BMC VGA and IPMI
- Serial: Physical serial port, provided by BMC SuperIO
- Hardware monitor
- POST code display
- TPM2
These binaries are extracted from the original BIOS:
- Intel Management Engine
- Intel Firmware Descriptor
This was developed and tested on a Librem L1UM v2 using a Core i7-9700
CPU. Native graphics init works for the Aspeed AST2500 BMC.
For development, the serial port console works from bootblock. Early
init waits for the BMC to finish booting since this is required for
serial port output.
Change-Id: I990f6024d65098a9553d7d1fe7f36614cc55ea19
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75090
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Makefile.inc to include five generic LPDDR5 SPDs for the following
parts for Dochi:
DRAM Part Name ID to assign
MT62F1G32D2DS-023 WT:B 0 (0000)
K3KL8L80CM-MGCT 1 (0001)
H58G56BK8BX068 0 (0000)
BUG=b:298337185
TEST=USE="project_dochi emerge-brya coreboot"
Change-Id: If0fd4bc950cef484db53b7b21849cfdfdd7816a5
Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Instead of selecting board-specific options under the common option and
making them conditional, move them to their related board option.
Change-Id: If9bea61cb84590e7455add908fa7722c60444503
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The tolerance of LCM voltage table is too small which leads to wrong
panel ID detection. Fine tune LCM ADC voltages based on hardware
calculations.
BUG=b:300418909
TEST=FW screen display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Id8dec043584f4c552837f70adb491584bfda7acf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Adopt TCG standard naming and definitions for TPM Return codes.
BUG=b:296439237
TEST=Build and boot to OS on skyrim
BRANCH=None
Change-Id: I60755723262ec205a4c134948b0250aac4974d35
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77665
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 21e61847c4cf643d79855deba8f58fd45808d571.
Reverting as it breaks booting on google/dedede based boards. First boot
after flashing is successful, 2nd hangs with the following error:
[EMERG] FspMemoryInit returned with error 0x80000003!
TEST=build/boot google/dedede (magpie, metaknight)
Change-Id: I6a2474617b444414c4248dbeda23ed0915704a17
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
This patch fixes the mistake introduced with 'commit 17cea380d985
("commonlib: Add CBMEM ID to store CSE Boot Partition Info")' where
single CBMEM ID name `CBMEM_ID_CSE_INFO` is associated with two
different name description.
Additionally, use little endian format for `CBMEM_ID_CSE_INFO` cbmem id.
TEST=Build and boot google/rex. Able to fix the issue introduced in
commit 17cea380d985 while running cbmem --list and verify that the
associated name string is proper.
Change-Id: I4235f1f6881ab86ccb252065e922d5d526f7f1f7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78110
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
BOARD_SPECIFIC_OPTIONS is duplicate to BOARD_GOOGLE_CHERRY_COMMON.
Thus, move all selects to the latter option.
Change-Id: I080201761d0a06d3b8a5a29de6085dde58960a60
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75085
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BOARD_SPECIFIC_OPTIONS is duplicate to BOARD_GOOGLE_ASURADA_COMMON.
Thus, move all selects to the latter option.
Change-Id: Id80523dce70f13f64a49b71656276c51e80ae5cd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75084
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Id69ea99b452e4214fcc81335a5c961b4da3ce48b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Id85503a5ec970ea92c07b99ec7048c521d85c79b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75026
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Selects should be done in the Kconfig file instead of Kconfig.name and
not mixed over both files.
Change-Id: Id450a4b6e409a548ee4d79b8b2ebf30ef61a3e27
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78083
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
PSR data is created and stored in CSE data partition. In platforms that
employ CSE Lite SKU firmware, a firmware downgrade involves clearing of
CSE data partition which results in PSR data being lost. In order to
backup PSR data before initiating firmware downgrade, CSE Lite firmware
supports a command to do this. This command works only after memory has
been initialized. So the CSE firmware downgrade can be done only in
post-RAM stage. CSE firmware sync actions will be moved to early
ramstage to support this.
Moving CSE firmware sync actions to ramstage results in cse_get_bp_info
command taking additional boot time of ~45-55ms. To avoid this,
cse_get_bp_info will be sent in early romstage and the response will be
stored in cbmem to avoid sending the command again, and re-use in
ramstage.
This patch adds a CBMEM ID to store this CSE Boot Partition Info
response in cbmem.
BUG=b:273207144
Change-Id: I914befadab4ad0ac197435e2a2c4343a796b2b1b
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78052
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com>
|
