summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-08-19tegra124: Implement the tegra i2c driver.Gabe Black
This uses the packet mode of the controller since that allows transfering more data at a time. Change-Id: I8329e5f915123cb55464fc28f7df9f9037b0446d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172402 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 4444cd626a55c8c2486cda6ac9cfece4e53dd0d3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6703 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19tegra124: Implement driver code for the pinmux, pingroup controls, and GPIOs.Gabe Black
The pins on tegra are controlled by three different units, the pinmux, the pin group controls, and the GPIO banks. Each of these units controls some aspect of the pins, and they layer together and interact in interesting ways. By default, the GPIOs are configured to pass through the special purpose IO that the pinmux is configured to and so can be ignored unless a GPIO is needed. The pinmux controls which special purpose signal passes through, along with pull ups, downs, and whether the output is tristated. The pingroup controls change the parameters of a group of pins which all have to do with a related function unit. The enum which holds constants related to the pinmux is relatively involved and may not be entirely complete or correct due to slightly inconsistent, incomplete, or missing documentation related to the pinmux. Considerable effort has been made to make it as accurate as possible. It includes a constant which is the index into the pinmux control registers for that pin, what each of the functions supported by that pin are, and which GPIO it corresponds to. The GPIO constant is named after the GPIO and is the pinmux register index for the pin for that GPIO. That way, when you need to turn on a GPIO, you can use that constant along with the pinmux manipulating functions to enable its tristate and pull up/down mode in addition to setting up the GPIO controls. Also, while in general I prefer not to use macros or the preprocessor when writing C code, in this case the set of constants in the enums was too large and cumbersome to manage without them. Since they're being used to construct a table in a straightforward way, hopefully their negative aspects will be minimized. In addition to the low level functions in each driver, the GPIO code also includes some high level functions to set up input or output GPIOs since that will probably be a very common thing to want to do. Old-Change-Id: I48efa58d1b5520c0367043cef76b6d3a7a18530d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171806 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 5cd9f17fe0196d13c1e10b8cde0f2d3989b5ae1a) tegra124: Add base address for the pinmux and pingroup registers. There weren't any constants for the pinmux or pingroup registers in the address map header. Old-Change-Id: I52b9042c7506cab0bedd7a734f346cc9fe4ac3fe Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172081 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 79b61016bfd702b0ea5221658305d8bd359f4f62) Squashed two related commits. Change-Id: Ifeb6085128bd53f0ef5f82c930eda66a2b59499b Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6702 Tested-by: build bot (Jenkins)
2014-08-19tegra124: Pick addresses to load the rom and ram stages.Gabe Black
If these aren't set, the rom and ram stages will attempt to load at address zero which doesn't work. Change-Id: I0b9b37d6363e6b208248d8a1af6ebee4db602486 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/173540 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 6ac5cea39d423bfcf5bbd53c2cc6228ab89f08b2) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6704 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-19asrock/imb-a180/board_info.txt: add flash fieldsStefan Tauner
Change-Id: Ie686d20811f33c620156c149315807343dde7784 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/6700 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-08-19macbook21: Support wake on LIDVladimir Serbinenko
Change-Id: Ifa1045abc761bef05977a8020cf6f18db042ad58 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6699 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x20[01]: Don't undock on disconnecting of power from dock stationVladimir Serbinenko
Change-Id: Id55bf259d5af187ba718de7e367395adcfc567b4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6707 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x201: Fix dock recognitionVladimir Serbinenko
Change-Id: I8b210786f660e2b2bae0d9ddd594386fd107cbe4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6706 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-19lenovo/x201: Unpower USB on undockingVladimir Serbinenko
Change-Id: I9b496e8ff92ee575d0b780eab0cb45ea05506d30 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6708 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-19lenovo/x200: Dock supportVladimir Serbinenko
Change-Id: I4e25630ae82e8030a9d6bfccb60844c301b1d635 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6705 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18trustzone: Pull trustzone init out of cpu.c and do it in romstage.Gabe Black
Trustzone needs to be initialized/disabled both on boot and on wake, so it needs to be done before ramstage which doesn't run on wake. cpu.c isn't compiled into romstage and fixing that causes other problems, so the trustzone functions were split out. Change-Id: I8fc630237ebec1f02a91600f8baf3d4e9ea66d0e Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/169817 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 055ed0e28476123b0bd666109af90baf40aadcee) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6666 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18tegra: Change how tegra124 and tegra include files from each other.Gabe Black
A problem with including the tegra124 directory directly in the include path is that it makes all headers in that directory first level headers available everywhere including places that have nothing to do with the SOC, even headers which were only intended for local use by tegra124 code. This change modifies things a bit to be more like the way the arch headers are chosen. In the tegra124 directory, there's an include directory which has an soc subdirectory in it. That include directory is added to the include path, making it possible to have headers private to the tegra124. When files specific to whatever tegra is being built for are needed, you can include <soc/foo.h> and get the version specific to that particular soc. Also, the soc.h header file was overhauled to use enums instead of defines, to consistently name things as far as their prefix (the less cryptic TEGRA instead of NV_PA) and suffixes like "BASE", and to get rid of values which were specific to U-Boot which we don't need. Since the only thing in the file were address constants, I also renamed the file addressmap.h. It would be included as: <soc/addressmap.h> which I think is easy to remember, does what you'd think it does from the name, and won't conflict with other header files just minding their own business in some other directory. Change-Id: I6a1be1ba28417b7103ad8584e6ec5024a7ff4e55 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172080 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 2c554f58f9ee18e151e824f01c03eb3f0e907858) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6659 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18exynos5420: Don't map low addresses that lead nowhereJulius Werner
I just spent half a day (including the time to implement a stack dumper) to figure out that I am reading from a NULL pointer. A problem this simple should be more easy to catch. Let's mark the address range below SRAM as uncached so that the MMU can yell at you right away for being the bad programmer you are when you access a NULL pointer. Change-Id: I4a3a13f75bf21b25732be2ecb69d47503eff1b53 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/170112 Reviewed-by: Ronald Minnich <rminnich@chromium.org> (cherry picked from commit 7316732ea0ccdc0d607bde81dbb38ca9abd29fa9) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6650 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18arm/exynos: Allow releasing UART retention for resume.Hung-Te Lin
The UART / serial console is put in retention state by kernel during suspend / resume path, which caused Coreboot not able to print any messages during resume. Sending values to the padret_uart_opt inside PMU may release UART, but that may also cause unexpected output when kernel is back. However, it's still very helpful when we are debugging suspend/resume inside Coreboot. To get UART message on resume, call wakeup_enable_uart() in boot block or romstage (before console_init). Change-Id: Ib5759cb402c6e018d9dba14fad8b61f6a1b1a265 Reviewed-on: https://chromium-review.googlesource.com/170440 Tested-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Commit-Queue: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 547fbbfe2eeb6da4e161f36be2caf8099f9eac9b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6649 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18exynos5: Implement support for USB 3.0 DRD PHYs/controllersJulius Werner
This patch adds support for the DesignWare3 USB 3.0 DRD controller and PHY to the Exynos5250 and Exynos5420 CPUs. It also adds code to the Google Snow and Pit boards to turn these controllers on where applicable. Change-Id: Idcca627363a69f1d65402e1acb9a62b439f077ff Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/169452 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit e9809ae12ef8b8bd6cd61d3f604cb9e4718cf7eb) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6642 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-18console: conditionally include console in bootblockStefan Reinauer
Right now some console specific objects are included in the bootblock even if CONFIG_BOOTBLOCK_CONSOLE is disabled while others are not. Make all of them conditional and also fix a preprocessor misuse in bootblock_simple.c and a stray (useless) die() in the Exynos wakeup code that made inclusion of those files necessary. Change-Id: Ia7f9d17654466f199b0e13afbdc9e14c9706530f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168772 Reviewed-by: David Hendrix <dhendrix@chromium.org> (cherry picked from commit 855da1f07b52898c7edcaffe5baabe9d485bbd83) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6637 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-18macbook11: New mainboard (macbook21 clone)Vladimir Serbinenko
Tested by marcus. Change-Id: Ifce2018ef49619b36fb07e5345d70c358a0397e4 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6698 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18azalia: Move shared variable to separate fileVladimir Serbinenko
Change-Id: Icf46ad1397c67478887c80a627b8f4eb0a67e542 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6695 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-18mainboard/intel/mohonpeak: code cleanupMartin Roth
Code cleanup requested in commit 90957f88 - "mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000" - Change com2 to COM2 in Kconfig text - clean up includes of headers - fix whitespace Change-Id: I828bc4781ee7de95be5546206c5d6033b75293d9 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6607 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18southbridge/intel/fsp_rangeley: fix to include irqroute.h twiceMartin Roth
This matches what was done on baytrail in commit bfca984b - soc/intel/fsp_baytrail: set up for including irqroute.h twice irq_helper.h intentionally gets included into irqroute.asl twice - once for pic mode and once for apic mode. Since people are used to seeing guard statements on the .h files, add the guards to irqroute.h and add a comment to irq_helper.h explaining why they aren't there. Change-Id: I709f9370ce7db1b3ffac2297aeaba5cc670ec20c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6606 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18mainboard/XXX/YYY/dsdt.asl: Whitespace fixMartin Roth
Use tab between "COREBOOT", and comment. This fix was requested in 90957f88 - "mainboard/intel: Add Mohon Peak CRB for Intel's atom c2000" Change-Id: If9fb6158cca95341ab57db1125e85648b616b72c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6601 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18cpu/intel/fsp_model_406dx: code cleanupMartin Roth
Code cleanup requested in commit 09670265 - "cpu/intel: Add fsp version of model 406dx (Rangeley / Atom C2000)" - add guard statements to chip.h - remove excessive includes - whitespace cleanup - add an IS_ENABLED Change-Id: Iaa85bd66953df015f083b23f6fd32949bcfd17bc Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6599 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-18apple/macbook21: Fix audio.Vladimir Serbinenko
Change-Id: I0bb939ac377f84431d871b702fdb42651e9a2e96 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5324 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-08-17Revert "macbook21: Add CST entries"Vladimir Serbinenko
Some of C-states still cause hang. Revert C-states patch. This reverts commit fe661612d8e94d41dc0129533bb02f7c4faaf11a. Change-Id: I7534dac5d27b853d7b93947c38bf3742797fdcc2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6694 Tested-by: build bot (Jenkins) Reviewed-by: Francis Rowe <info@gluglug.org.uk> Reviewed-by: Idwer Vollering <vidwer@gmail.com>
2014-08-17gm45: Declare BIOS memory as RAM.Vladimir Serbinenko
So it's in line with other boards and those addresses are cached for faster access. Change-Id: I7794d75ef1e3ceea6b2a4acba01e4af5d1f005f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6689 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-17macbook21: Add CST entriesVladimir Serbinenko
Change-Id: I9e8628d879a193e2f6ba561ee17f24ae94435e1a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6693 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-17apple/macbook21: EC handling ACPI implementation.Vladimir Serbinenko
Now battery indicator and lid work. Change-Id: I2f747a408e331a245d91dd5f9c7ead0729f02a67 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5323 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-08-17A new port apple/macbook21.Mono
Current problems: - Complete lack of EC support (no battery indicator, no temperature, ...) - No audio support Change-Id: I25d09629dd82e01fadca2b6c25f72aaf08eafae1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Axel Holewa <mono@posteo.de> Reviewed-on: http://review.coreboot.org/5321 Tested-by: build bot (Jenkins)
2014-08-17i945: Replace video gfx init.Vladimir Serbinenko
Old init was a replay not even meant to have been committed. This one really computes values and does its job. Tested on Macbook2,1 (1280x800) and X60 (1024x768). Change-Id: I61b6946c095fe06e20ae9a0db54696d0568225dd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5320 Reviewed-by: Francis Rowe <info@gluglug.org.uk> Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16AMD Family 14: Fix permissions on one northbridge fileBruce Griffith
fam14_callouts.h should not have the execute bit set. Change-Id: Iab44d04f2c9669e28d2d5028b0a11e565cc7bb07 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/6675 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Decrease MTRR usageVladimir Serbinenko
Change-Id: I4c790b0eaf2af94286e6691281fcad3d14659a99 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6687 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Make UMA size configurable.Vladimir Serbinenko
Change-Id: I27b2ec70b9c77f3caf9d52788f46f5dc16045d1b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6686 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16lenovo/x200: Remove leftover roda rk9 devices.Vladimir Serbinenko
Change-Id: Ief3baa985cf83059255e64a8ab78cad9f8571199 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6688 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16gm45: Recognize 48MiB gfx UMA.Vladimir Serbinenko
Change-Id: I33e6b357ea044d6ec00b119e84cbada7bf58317f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6685 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16intel/gm45: native gfx init.Vladimir Serbinenko
Tested on lenovo X200 in both text and gfx mode. Change-Id: I273971d0f34ca3529959d4228e9516775459b806 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6682 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16exynos5xx0: rename local "main" variablePatrick Georgi
Change-Id: I9a454c88c65e4e70d351f1ec781e75ba400ceb29 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6664 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-16bootstate: don't use header in romstage codePatrick Georgi
Change-Id: I0c2943bb0889552dc384d8efb5226cd6982a4d81 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6663 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-15tegra124: fix Kconfig ARCH settingsIsaac Christensen
The initial commit for tegra124 (396b072) was not updated for the new ARCH settings. Change-Id: I147bdf289e91031bd0c0a61e6da43e9c1a438f84 Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6658 Tested-by: build bot (Jenkins)
2014-08-15Move baytrail-specific config to baytrail.Vladimir Serbinenko
Stop polluting first screen of all boards. Change-Id: I1ab88075722f7f0d63550010e7c645281603c9c3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6548 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14armv7: mark EABI compatibility symbols as usedStefan Reinauer
These symbols are not used anywhere in our C code, so when using GCC's link time optimization feature they will be dropped even though they're needed by libgcc. Hence we need to mark them as used so GCC does not stumble and fall over its own guts. Change-Id: Ib2e9ea2610b57ab8244d5b699dd56025a4f08a01 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168773 (cherry picked from commit 416ffc880bcf4122b5430fbd9d9547c83886af2f) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6640 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-14payloads/external/SeaBIOS: move build directoryIdwer Vollering
Move SeaBIOS' build directory out of build/ This allows the user to delete build/ in the top dir and keep the built binary in payloads/external/SeaBIOS/seabios/out/ Change-Id: Ia7d515cd7e349beebcd9b62c9d956137acb73c82 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/6460 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-14Exynos: de-duplicate mct timer initializationStefan Reinauer
timer initialization is the first thing happening in the Exynos CPU's bootblock code. Hence we don't need to keep track of it in several places, and we don't need to do it over and over again (e.g. in each stage) Change-Id: I7bd9a0b7930fc9c37faabd62e3eecc3e5614a879 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168994 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Commit-Queue: Stefan Reinauer <reinauer@chromium.org> Tested-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 5a95bc2bcab5a92c5e6c144005861bf731f59de3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6638 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-14pit: snow: Fix snow, fix up pit write protect.Gabe Black
A recent change to support early firmware selection on ARM broke snow and was incompletely implemented on pit. This change fixes snow by applying the remaining part of the change that had been applied to pit, and also hooks up real values in the get_write_protect_state function. Change-Id: Ifef7ad1bf399f79353daec3dd46973f2b2022e37 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/169120 Reviewed-by: David Hendrix <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 841773e048cd9cfbb64782059c24e29c467f17c8) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6635 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-14lenovo/x200: Fix black screen on quick boot.Vladimir Serbinenko
Otherwise without USB when coreboot boots too quickly EC is confused and thinks that LID is closed and so powers off the backlight until user flaps the lid. Change-Id: I14dfaa62582de83fd4c9f9518e9436b3a3035366 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6651 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-08-14gm45: Set D0F0_SKPD on normal boot pathVladimir Serbinenko
Otherwise we get a warning on normal boot. Change-Id: Ida1e1d23e258438251d4ec2417f93ad14c3b9f7d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6652 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-08-14gm45: Set acpi_slp_type only once.Vladimir Serbinenko
It doesn't harm to set several times but it pollutes the log. Change-Id: I7aad7f0229a7d9d071ba844a1cfa123dffc4cacf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6653 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2014-08-14ARMv7/Exynos: Fix memory location assumptionsStefan Reinauer
This patch cleans out a lot of unused variables in the ARM Kconfig files and introduces CONFIG_RAMSTAGE_BASE which is similar to CONFIG_RAMBASE on x86. This gets rid of the hard coded assumption that on ARM coreboot is always executed at the lowest DRAM address. But in fact, this might not be true because we might want coreboot to live at the end of RAM, or in SRAM Change-Id: I03e992645f9eb730e39a521aa21f702959311f74 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168645 Reviewed-by: David Hendrix <dhendrix@chromium.org> Tested-by: David Hendrix <dhendrix@chromium.org> (cherry picked from commit 15b87892eb2d5e27759c49dc6c8c7e626f651d77) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6634 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-14exynos5: Refactor crazy old U-Boot base address macros awayJulius Werner
All this samsung_get_base_address_of_device_with_a_really_long_name() boilerplate makes my eyes bleed... I think there are so much cleaner ways to do this. Unfortunately changing this ends up touching nearly every Exynos5 file, but I hope you agree that it's worth it (and the sooner we get it over with, the better... I can't bring myself to make another device fit into that ugly scheme). This also removes the redundant EXYNOS5 base address definitions from the 5420 directory when there are EXYNOS5420 ones, to avoid complete confusion. The new scheme tries to use EXYNOS5 for base addresses and exynos5 for types that are common between the two processors, and EXYNOS5420/exynos5420 for things that have changes (although I probably didn't catch all differences). Change-Id: I87e58434490ed55a9bbe743af1f9bf2520dec13f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167579 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit 66c87693352c248eec029c1ce83fb295059e6b5b) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6632 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-13exynos5420: Enable relocatable module supportStefan Reinauer
Since we're now supporting ARMv7 relocations, we can enable rmodule support on Exynos 5420. This does not automatically enable relocatable ramstage. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ic3af1eabb3b816944587a46409224f778d941b8a Reviewed-on: https://chromium-review.googlesource.com/167403 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 7b5afef4ee87fc3245ec887dfda873c529d8d04d) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6629 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-13Tegra,Tegra124: proposed layout for file hierarchy with exampleRonald G. Minnich
This change shows the source structure for nvidia Tegra and Tegra124 SOC. The problem we are trying to solve is that there is a large amount of common code in the form of .c and .h files across many different Tegra SOCs. The solution is to provide common code in a single directory, but not to compile in the common code directory; rather, we compile in a directory for a given SOC. Different SOCs will sometimes need different bits of code from the common directory. Tegra common code lives in tegra/, but there is no makefile there: if a Tegra common file is needed in a SOC, it is referenced via a Makefile in a specific Tegra SOC. Another issue is includes. Include files in the common directory might be accessed by a piece of code in an SOC directory. More problematically, code in the common directory might require a file in an SOC directory. We don't want to put the SOC name in an #include path, e.g. in a C file in tegra/ is very undesirable, since we might be compiling for a tegra114. On some systems this is solved by a pre-pass which creates a set of symbolic links; on others with nested #ifdef in the common code which include different .h files depending on CPP variables. In previous years, both LinuxBIOS and coreboot have tried these solutions and found them inconvenient and error-prone. We choose to solve it by requiring explicit naming of part of the path of files that are in the common directory. This requirement, coupled with two -I directives in the Makefile.inc, allows common and SOC C code to incorporate both common and SOC .h files. .c and .h files -- SOC or common -- name include files in the common directory with the prefix tegra/, e.g. SOC files will be included from the SOC directory if they have no prefix: The full patch of clock.h will depend on what SOC is being compiled, which is desirable. In this way, a common file can pick up a specific SOC file without creating symlinks or other such tricky magic. We show this usage with one file, soc/nvidia/tega124/clock.c. This compiles. The last question is where to put the prototype for the function defined in this file -- soc.h? Change-Id: Iecb635cec70f24a5b3e18caeda09d04a00d29409 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://chromium-review.googlesource.com/171569 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 53e3bed868953f3da588ec90661d316a6482e27e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6621 Tested-by: build bot (Jenkins)
2014-08-13Falco: Patch to setup FUI (coreboot initializations) for falcoFurquan Shaikh
For now using the same gma.c and i915io.c files as for slippy Change-Id: Ieb09d0152d525aa090eeb86ebfa253d450d22820 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/64373 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 3e119c7e22cb82677754413e56a125f4a372ad54) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6603 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-13Falco: Patch to enable correct port clock selection for dpFurquan Shaikh
This is required only for haswell since the register configs have changed. Also, created mainboard specific header file Original-Change-Id: I61bf8d7cef1f204735a2f72225c48d6e44a99945 Signed-off-by: Furquan Shaikh <furquan@google.com> Conflicts: src/mainboard/google/slippy/gma.c src/mainboard/google/slippy/i915io.c Conflicts: src/mainboard/google/slippy/gma.c Change-Id: I77f2542ca8228358f59aafd99c0d13168ab47fb5 Reviewed-on: https://gerrit.chromium.org/gerrit/66853 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 77f9d1ddd4376e2a290d466f0669a43997492c8e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6602 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2014-08-13Falco/Slippy: Patch to refactor haswell/gma.c and ↵Furquan Shaikh
mainboard/google/slippy/i915io.c A large portion of documented registers have been initialized using macros. Only a few undocumented registers are left out. i915io.c looks lot more cleaner by removing redundant calls. However, some more work is required to correctly identify which calls are not required. All the io_writes are replaced by gtt_writes. Change-Id: I077a235652c7d5eb90346cd6e15cc48b5161e969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/66204 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> (cherry picked from commit 39f3289f68b527575b0a120960ff67f78415815e) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6600 Tested-by: build bot (Jenkins)
2014-08-13lenovo/x200: New mainboard.Vladimir Serbinenko
Change-Id: I64e59648064d5875907b5057e2f9f72f2c5997b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6631 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-13lenovo/h8: Support uwb radio.Vladimir Serbinenko
It's the third minipcie slot in x200. Change-Id: Ibfa8d787698cd23b4abcffe5cff2d62039cf0f86 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6641 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-13gm45: Allow skiping voltage config.Vladimir Serbinenko
Change-Id: I81b9966212d09d4d2561b3adc20d6d8a8a200f4b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6630 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-13ARMv7: drop dead code from Makefile.incStefan Reinauer
This commented out code is a left over from x86. Change-Id: Ice806000c73d5a068962914d067d4de7b3d75f45 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168961 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendrix <dhendrix@chromium.org> (cherry picked from commit 9d700cf35d2283a088e704c0ebd34e6f58f54993) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6639 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-13southbridge/amd/cimx/sb800: Uninitialized variables in config funcEdward O'Callaghan
Both 'SbSpiSpeedSupport' and 'UsbRxMode' are uninitiated upon return from a 'sb800_cimx_config()' call. Change-Id: I32237ff97fafc3e69627d427e54268dcb039e12c Found-by: Coverity Scan Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6474 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-13chromeos: On ARM platforms VBNV lives in the ECStefan Reinauer
This patch renames the x86 way of doing things to explicitly mention CMOS (which is not available on our ARM platforms) and adds an implementation to get VBNV through the Chrome EC. We might want to refine this further in the future to allow VBNV in the EC even on x86 platforms. Will be fixed when that appears. Also, not all ARM platforms running ChromeOS might use the Google EC in the future, in which case this code will need additional work. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901 Reviewed-on: https://chromium-review.googlesource.com/167540 Reviewed-by: David Hendrix <dhendrix@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6616 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-13arm: libpayload: Add cache coherent DMA memory definition and managementJulius Werner
This patch adds a mechanism to set aside a region of cache-coherent (i.e. usually uncached) virtual memory, which can be used to communicate with DMA devices without automatic cache snooping (common on ARM) without the need of explicit flush/invalidation instructions in the driver code. This works by setting aside said region in the (board-specific) page table setup, as exemplary done in this patch for the Snow and Pit boards. It uses a new mechanism for adding board-specific Coreboot table entries to describe this region in an entry with the LB_DMA tag. Libpayload's memory allocator is enhanced to be able to operate on distinct types/regions of memory. It provides dma_malloc() and dma_memalign() functions for use in drivers, which by default just operate on the same heap as their traditional counterparts. However, if the Coreboot table parsing code finds a CB_DMA section, further requests through the dma_xxx() functions will return memory from the region described therein instead. Change-Id: Ia9c249249e936bbc3eb76e7b4822af2230ffb186 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167155 (cherry picked from commit d142ccdcd902a9d6ab4d495fbe6cbe85c61a5f01) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-12tegra124: Implement the monotonic timer by reading the 1us timer register.Gabe Black
It turns out there's a register in tegra which automatically counts at 1us increments. It's primarily intended for hardware to use (I think to drive other timers) but we can read it ourselves since a 1us timer is exactly what we need to support the monotonic timer API. Change-Id: I68e947944acec7b460e61f42dbb325643a9739e8 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/172044 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 161a39c53404ea0125221bbd54e54996967d6855) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6620 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2014-08-12tegra124: Add stack related config options to the Kconfig.Gabe Black
Otherwise the stack ends up down at 0 and has 0 bytes. Change-Id: I0e3c80a0c5b0180d95819ab44829c2a0b527a54d Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/171015 Reviewed-by: Ronald Minnich <rminnich@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit 3e69a477474697bcbc40762ec166e8a515d8b0c2) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6619 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-12tegra124: Add some make rules which will wrap the bootblock in the BCT.Gabe Black
These rules slip into the normal bootblock preperation process and use the cbootimage utility to wrap it in a BCT. Change-Id: I8cf2a3fb6e9f1d792d536c533d4813acfb550cea Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: https://chromium-review.googlesource.com/170924 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: Gabe Black <gabeblack@chromium.org> Tested-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit cf4a9b0712c21b885bb59310671fb87e38abb665) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6618 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-12gm45: Move S3 detection to enable stage.Vladimir Serbinenko
Also move it to NB to be in line with other. Change-Id: Ibd961d60dcd686899f34f6a494c14ff9d65e618b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6625 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12i82801ix: Make RP04 optionally hotpluggable.Vladimir Serbinenko
Change-Id: I34a1ae4bff22db6ee55fa511de39bdfd5dd92c7e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6627 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12gm45: Reserve RAM for ME if it's active.Vladimir Serbinenko
Change-Id: Icd2b075cec9461f9d6028a8c845f6900b6fe04c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6628 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12gm45: Allow coexistance with ME firmware.Vladimir Serbinenko
Change-Id: I08ca5eec94c70b43789122266d68af149772385c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12Haswell: Lower TJ_MAX to 100C. Adjust critical temps to match.ChromeOS Developer
Change-Id: I3326b6e3c412b6360af37030cefd13d95b704e70 Signed-off-by: Dave Parker <dparker@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/180750 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 1978b0f91b2e91d2251721c7c6981d51a6930b61) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6615 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12exynos5420: minor clean-up memory related stuffDavid Hendricks
This cleans up a few minor things (mostly #defines) of the memory code for exynos5420, pit, and kirby. Specifically: - CONCONTROL.empty is read-only, so don't try to set it and also get rid of the unneeded DMC_CONCONTROL_EMPTY_ENABLE #define. - MEMBASECONFIG* overlaps members of the mem_timings struct and are mainboard-dependent anyway, so get rid of 'em. - DMC_MEMCONTROL_TP_DISABLE corresponds to a reserved bit. It may have been deprecated. - Same with TIMING* #defines. - Clarify DDR_MODE_* usage and use mem->mem_type when appropriate. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ideb21efcc97b24f7e115e90051c20daef4480f17 Reviewed-on: https://chromium-review.googlesource.com/167500 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit 650dba32cb217414c422907398f68e784e5720e8) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6614 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-08-12exynos5420/pit: re-factor membaseconfig0/1 usageDavid Hendricks
membaseconfig0/1 are utterly dependent on the mainboard's particular DRAM setup. This defines their values in the mem_timings struct for pit. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: Ifd782d1229b2418f8ddbf0bcb3f45cc828ac34b0 Reviewed-on: https://chromium-review.googlesource.com/167488 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit 80eebd5bc0dbb9fabf81f46c25dcd5c5d5747579) exynos5420: necessary updates for DRAM This updates DRAM usage for Exynos5420 so that we can actually use 3.5GB: - Memory chips used with Exynos5420 may have 16 row address lines. Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I86d1a96d0d1a028587f7655f8de5a2e52165e9d2 Reviewed-on: https://chromium-review.googlesource.com/167489 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit 04bbaf5d8e125166dd689f656d5b37776be01fb1) Squashed two related commits. Change-Id: I4e45bc8a446715897ec21b0160701152fa6b226b Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-12exynos5420: ddr3: Switch from 4G setup to 2G setup on exynos5420David Hendricks
This changes the number of chip selects that we configure from 2 to 1. On current setups with (x16 memory 4Gbit chips) that means that we're at 2GByte. Technically we should add a second setting in the ares_ddr3_timings and select between the two of the based on board strappings. That would make the CONFIG_RUN_TIME_BANK_NUMBER work properly. I've changed the ddr3_mem_ctrl_init() so it should handle that, but I'm not actually doing the board strapping read right now. This change means that accesses to 0xA0000000 - 0xFFFFFFFF on 2G systems will no longer put the system in a messed up state (leading to a hang). It also prevents some of the weird boot behavior that we've seen that comes and goes depending on U-Boot alignment. See <http://crosbug.com/p/20577>. This patch was ported from: https://gerrit.chromium.org/gerrit/66117 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Ib4cfe420aac30bd817438f06d01e8671afc4a27d Reviewed-on: https://chromium-review.googlesource.com/167210 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit 0ea574243058068702e3f6bc7355098745d16880) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6612 Tested-by: build bot (Jenkins)
2014-08-12Exynos5420: ddr3: fine tuning the DDR3 timing valuesDavid Hendricks
Fine tuning DDR timings value for better stability * Changed Data Driver Strength from 34 ohms to 30 ohms, expected to enhance signal integrity. * Changed DQ signal from 0xf to 0x1f000f, to keep default value safe. * Changed mrs[2] and added new mrs direct command for setting WL/RL without resetting DLL. * Added explicit reset value write in phy_con0 instead of just setting a bit, to ensure that reset happens. * Added DREX automatic control for ctrl_pd in none read memory state. This is ported from: https://gerrit.chromium.org/gerrit/61405 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I59e96e6dede7b49c6572548aca664d82ad110bb1 Reviewed-on: https://chromium-review.googlesource.com/66995 Reviewed-by: ron minnich <rminnich@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit ec34b711c6d270672c56d45c370ca14c0aa27ca3) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6611 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-12Exynos5420: Remove code for enabling read levelingDavid Hendricks
This patch intends to remove all code which enables hardware read leveling. We need to disable h/w read leveling because new ASV table is merged in kernel (which is based on the new characterization condition) and new characterization environment has h/w read leveling disabled, so we should also disable this. Also, disabling h/w read leveling improves the MIF LVcc value (LVcc value is the value at which DDR will fail to work properly), improve LVcc means we have enough voltage margin for MIF. When h/w leveling is enabled, we have almost zero volatge margin. This was ported from: https://gerrit.chromium.org/gerrit/66070 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Id0a2d77e6214325f226d51ae08464b39424cea83 Reviewed-on: https://chromium-review.googlesource.com/66994 Reviewed-by: Gabe Black <gabeblack@chromium.org> Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit d29add98f52876aaed4fee2b76edf6b4591e66e8) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6610 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-12exynos5: Refactor board-specific parts out of USB PHY codeJulius Werner
This patch moves around some of the existing Exynos5 USB 2.0 PHY code to make it cleaner in preparation of the 3.0 PHYs. It moves the VBUS GPIOs (which are completely board-specific) into the mainboard code and makes sure to only initialize PHYs on the boards that actually need them. It also removes the USB 3.0 PLL hack that was needed on Snow from the Pit and Kirby boards (which do not have that PLL anymore). Change-Id: Ia35f47a765acff60481f0907f7448ec4f78e0937 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66887 Reviewed-by: Stefan Reinauer <reinauer@google.com> (cherry picked from commit c3b1a8b687b535f4d5ac1b3bd2a4760151698fdb) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6609 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-12exynos5420: ddr3: Cleanup init to use constants for directcmdDavid Hendricks
The old ddr3_mem_ctrl_init() for exynos5420 had hardcoded constants for accessing directcmd registers. Modify to use #defines where possible. This is ported from: https://gerrit.chromium.org/gerrit/#/c/65616 Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I01567fc6941608a570832de97259c55e84942d01 Reviewed-on: https://gerrit.chromium.org/gerrit/66789 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit d751e019f450172f060ce255ae53e972bc4a19ea) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6605 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-12exynos5420: Alter init sequence as per recommendationDavid Hendricks
As per hardware recommendation, CKE PAD retention release must happen just before gate leveling enable and only in case of resume. Hence, this patch moves pad retention release from dmc_common.c to dmc_init_ddr3_exynos5420.c. In addition to this we are providing 125 (+3 extra being safe) times auto refresh to DRAM by sending REFA direct command. This is required because when CKE PAD retention release happens, self refresh mode of DDR3 is disabled. Hence, auto refresh 125 times. This is ported from https://gerrit.chromium.org/gerrit/#/c/65573 Note: Since WAKEUP_DIRECT does not go thru memory init, it should be safe to move CKE PAD retention out of bootblock.c. Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: Idec5d6fbbe3c6344d47401ba7203079c52a9b866 Reviewed-on: https://gerrit.chromium.org/gerrit/66788 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit 96cbcb09245d4df92d3e1998704ab440be42df25) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6604 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-12exynos5420: Make USB A-A booting work with early data cacheJulius Werner
Apparently the IROM doesn't like data caches... the recently added dcache-in-bootblock makes A-A booting fail, and flushes/invalidations alone don't seem to fix it. It's pretty fast anyway, so we just disable the cache again for the duration of the IROM call. Also removes a superfluous invalidation line from the bootblock code... dcache_mmu_enable/disable already take care of that. Old-Change-Id: I35580d15664c7b4197d4ed14028720147adbf918 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66602 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: David Hendricks <dhendrix@chromium.org> (cherry picked from commit e9c28a6a7a88c8286e62764ee5ad2694da2e822f) exynos5: Implement booting from SDMMC media This patch augments the alternative CBFS media source implementation for Exynos5250 and Exynos5420 to allow booting from SDMMC devices (such as an SD or uSD card reader, if available). It also moves MMC initialization for the Snow, Pit and Kirby boards from romstage to ramstage (mainboard_init) to prevent it from interfering with the IROM during SDMMC boot. Old-Change-Id: Ic4adef80c28262d084a53c28ec59aa7ac3af50c8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://gerrit.chromium.org/gerrit/66154 (cherry picked from commit 08de13b72432c076e3327c048df93d89d52b0ecc) snow and pit: turn on FET4 (for SD card) at bootup Explictly enable FET4 on Snow and Pit. Historically we haven't needed to do this because: * On snow there's a bypass around FET4 which effectively eliminates it. Even if we don't turn on FET4 the SD card is still powered. Turning on FET4 doesn't hurt though and is technically correct. * On pit the EC turns on FET4 on cold bootup. On pit we run into a problem if the kernel turns off FET4 like in <https://gerrit.chromium.org/gerrit/#/c/65332/> and then we get a software reset or warm reset. In this case the EC won't know to turn it back on. This was ported from: https://gerrit.chromium.org/gerrit/#/c/65673 Signed-off-by: David Hendricks <dhendrix@chromium.org> Old-Change-Id: I57337f12b38889e6afee8577cf8807ec4c41e91c Reviewed-on: https://gerrit.chromium.org/gerrit/66786 Commit-Queue: David Hendricks <dhendrix@chromium.org> Tested-by: David Hendricks <dhendrix@chromium.org> Reviewed-by: Ronald G. Minnich <rminnich@chromium.org> (cherry picked from commit e910117047d898b6b1d0dc965ef2ec0237d17646) Squashed three commits for alternate cbfs SD support. Change-Id: Idbd1fd4776cbf8cb20d03e6b691104cd8540a1ec Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6530 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-12Kconfig: do not set SB_HT_CHAIN_ON_BUS0 twice to the same valueDaniele Forsi
Change-Id: If7286abf91f758cfbac2c85dcad336f38f70d843 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6579 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2014-08-12armv7/Makefile.inc, cpu/Makefile.inc: align output of printfDaniele Forsi
Fix whitespace. Change-Id: I9e28b819d685851a84cee6c5a71458e07d0ec808 Signed-off-by: Daniele Forsi <dforsi@gmail.com> Reviewed-on: http://review.coreboot.org/6577 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-12mainboard/intel/minnowmax: clean up includes & whitespaceMartin Roth
Clean up as requested in commit e6df041b. No functional changes. Change-Id: Iec3f7ee25fd8351c7e13d660e2df6461f7745478 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6597 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-12cpu/intel/XXX/acpi.c: Fix coding style violationMartin Roth
Clean up a coding style violation as requested in the review of commit 09670265. Change-Id: I2815635efbb70a1e5841ca79cf2b4845bc6c23f2 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6598 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-12gm45: Ensure that brightness register in gma contains sane value.Vladimir Serbinenko
Change-Id: Ia66c71c3adf2ae0d413750b5e59e3eaba3888a0b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6587 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11vendorcode/intel/fsp/baytrail/absf: add Minnow Max absf filesMartin Roth
The absf files contain the modifications to the default settings in the FSP. They are used as input files for Intel's 'Binary Configuration Tool' (BCT) along with the FSP.bin file to generate customized FSP binaries. The Minnow Max absf files set up the values for the soldered down memory. This requirement will go away with the release of the next Bay Trail FSP, and the memory settings will be configurable at runtime. Change-Id: Id72545d78a7e82d9a5090710a9c7a8a9b1e81208 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6432 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-08-11bayleybay_fsp: Add bakersport board variantMartin Roth
The Bakersport board is a variant of the Bayley Bay mainboard that uses one ECC DIMM instead of two non-ECC dimms. This commit uses the Bayley Bay mainboard directory and modifies the required pieces to add the Bakersport board variant. It disables the second DIMM, points to an ECC version of the FSP, and sets the board name to be Bakersport instead of Bayley Bay. All of the code is still contained in the bayleybay_fsp directory. It seems like duplicating the whole directory for the one line of code that's actually different between the two platforms. Change-Id: Ia31e9ee927a6810a01a1ae143fcb00cfb7d8a7aa Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/5983 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-08-11gm45: Declare brightness variables for ACPI use.Vladimir Serbinenko
Change-Id: I23a088919aaac16066e5dd8300a081a8095a93f0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6589 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11mainboard/intel/minnowmax: Add MinnowMax mainboardMartin Roth
MinnowMax board using Intel's Bay Trail FSP Working: - Booting from SATA / USB / (USB3 with latest SeaBIOS) Not working: - Boot from SD - S3 Suspend / Resume ***** To configure the FSP ***** Download the Bay Trail FSP and the binary config tool: Modify the standard Bay Trail FSP: run the bct tool with the command line options: bct --bin <Bay Trail FSP Binary> \ --absf src/vendorcode/intel/fsp/baytrail/absf/minnowmax_Xgb.absf \ --bout <path to save the updated FSP to> Here are the required changes for modifying the FSP manually: Enable Memory Down: Enabled DRAM Speed: 1066 MHz DIMM_DWidth: x16 DIMM_Density: 4 Gbit (2GB Minnow Max) / 2 Gbit (1GB Minnow Max) tCL: 7 tRP_tRCD: 7 tWR: 8 tRRD: 6 tRTP: 4 tFAW: 27 Other FSP values can remain the same. ***** To configure the vbios ***** The vbios is in the Bay Trail FSP package. Download Intel's "Binary Modification Program" (BMP) Use it to disable all ports except HDMI on port B. Change-Id: I00d90e0d838d70c9d25c69f5115d0c9d6d19855c Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6429 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11x86/smm/smihandler.c: break case in switchPatrick Georgi
The case doesn't look like a deliberate fall-through, since the next case (SNB/IVB/HSW) is more specific than the one before it, so break out. Change-Id: I55497aefe9e835842a82121270f2b2a9952f560d Found-by: Coverity Scan Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/6571 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-08-11northbridge/intel/*/gma.c: Remove dead codeEdward O'Callaghan
Remove some dead coded spotted in Clang builds. Change-Id: Ia23e16eae76593eee249e0894ef1d704a274616f Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6130 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-08-11coreboot classes: Add dynamic classes to corebootFurquan Shaikh
Provide functionality to create dynamic classes based on program name and architecture for which the program needs to be compiled/linked. define_class takes program_name and arch as its arguments and adds the program_name to classes-y to create dynamic class. Also, compiler toolset is created for the specified arch. All the files for this program can then be added to program_name-y += .. Ensure that define_class is called before any files are added to the class. Check subdirs-y for order of directory inclusion. One such example of dynamic class is rmodules. Multiple rmodules can be used which need to be compiled for different architectures. With dynamic classes, this is possible. Change-Id: Ie143ed6f79ced5f58c200394cff89b006bc9b342 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/6426 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11i82801ix: Declare gen decode registers.Vladimir Serbinenko
Change-Id: I999818833c9040eb4f4e19c313b5e9be216ffd86 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6585 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-11soc/intel/fsp_baytrail: set up for including irqroute.h twiceMartin Roth
irq_helper.h intentionally gets included into irqroute.asl twice - once for pic mode and once for apic mode. Since people are used to seeing guard statements on the .h files, add the guards to irqroute.h and add a comment to irq_helper.h explaining why they aren't there. Add a time. Change-Id: I882cbbff0f73bdb170bd0f1053767893722dc60a Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/6572 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-11gm45: Set default VGA PCIID.Vladimir Serbinenko
Change-Id: I2eba1ca27c1f8181a9c6288f6794922915575790 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6586 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-11lenovo/h8: Remove useless smi.h include.Vladimir Serbinenko
It's not really used. Change-Id: I760d5a4cbe46d17ef37ea34e29eecdb0721cb945 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6588 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10cbfs: Check return value of map() for errorJulius Werner
The CBFS core checks the result of a media->map() operation in multiple places for CBFS_MEDIA_INVALID_MAP_ADDRESS, suggesting that this is a valid response. However, it ironically fails to do so when actually mapping the CBFS file itself, which can fail on buffer-constrained systems since the size is much larger than when mapping metadata. This patch adds a check with an error message and a NULL pointer return for that case to make it easier to understand this condition. Change-Id: Icae3dd20d3d111cdfc4f2dc6397b52174349b140 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174951 Reviewed-by: Gabe Black <gabeblack@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> (cherry picked from commit 63f2c4465f9633a637186e69bc3862d5413106ac) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6537 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10vboot: Implement VbExGetTimer using monotonic timersStefan Reinauer
On x86 VbExGetTimer() uses rdtsc. However, on all other platforms, let's just use coreboot's monotonic timers. Change-Id: I0cd359f298be33776740305b111624147e2c850d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/169620 (cherry picked from commit e910bb17522d5de42c0fc3cc945278e733fa2553) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6534 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10drivers: Add I2C TPM driver to corebootStefan Reinauer
On ARM platforms the TPM is not attached through LPC but through I2C. This patch adds an I2C TPM driver that supports the following chips: * Infineon SLB9635 * Infineon SLB9645 In order to select the correct TPM implementation cleanly, CONFIG_TPM is moved to src/Kconfig and does the correct choice. Old-Change-Id: I2def0e0f86a869d6fcf56fc4ccab0bc935de2bf1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/167543 Reviewed-by: ron minnich <rminnich@chromium.org> (cherry picked from commit b4049a0e96f6335a93877e1e884f9a440487c421) i2c tpm: Remove mostly useless delay code/tables. I assume from the code in the TPM driver that the TPM spec defines different types of delays and timeouts which each have a particular duration, and that the TPM can tell you how long each type is if you ask it. There was a large table, some members of a data structure, and a function or two which managed the timeouts and figured their value for different operations. The timeout values for the various "ordinals" were never set in the vendor specific data structure, however, and always defaulted to 2 minutes. Similarly the timeouts a, b, c, and d were never overridden from their defaults. This change gets rid of all the timeout management code and makes the "ordinal" timeout 2 minutes and the a, b, c, and d timeouts 2 seconds, the larger of the two default values. This is a port from depthcharge to coreboot, original change: https://chromium-review.googlesource.com/#/c/168363/ Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Old-Change-Id: I79696d6329184ca07f6a1be4f6ca85e1655a7aaf Reviewed-on: https://chromium-review.googlesource.com/168583 Reviewed-by: Gabe Black <gabeblack@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit b22395a73f361c38626911808332a3706b2334fe) TPM: Stop requesting/releasing the TPM locality. The locality is requested when the TPM is initialized and released when it's cleaned up. There's no reason to set it to the same thing again and restore it back to the same value before and after every transaction. forward ported from https://chromium-review.googlesource.com/#/c/168400 Old-Change-Id: I291d1f86f220ef0eff6809c6cb00459bf95aa5e0 Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://chromium-review.googlesource.com/168584 Reviewed-by: Gabe Black <gabeblack@chromium.org> (cherry picked from commit cc866c20c6f936f349d2f1773dd492dca9bbf0c1) Squashed three commits for the i2c tpm driver. Change-Id: Ie7a50c50fda8ee986c02de7fe27551666998229d Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6519 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-08-10cbfs: Fix overwalk on file scanSteven Sherk
A bootblock overwalk was occuring when deriving the actual length, the bootblock size was not taken into account and bootblock size was not aligned. Resolved merge conflict. Change-Id: I7eb42f8deaaf223dcf07b37bb7dde4643acd508f Signed-off-by: Steven Sherk <steven.sherk@se-eng.com> Reviewed-on: https://gerrit.chromium.org/gerrit/65989 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Steve Sherk <ssherk70@gmail.com> Tested-by: Steve Sherk <ssherk70@gmail.com> (cherry picked from commit 20b0ba479b01755fbdc7f3dd9214e8af923402ba) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6539 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10coreboot_tables: reduce redundant data structuresJulius Werner
There are three coreboot table tags that all define some kind of memory region, and each has their own homologous struct. I'm about to add a fourth so I'll just clean this up and turn it into a generic struct lb_range instead. Change-Id: Id148b2737d442e0636d2c05e74efa1fdf844a0d3 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/167154 (cherry picked from commit 22d82ffa3f5500fbc1b785e343add25e61f4f194) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6456 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-08-10lynxpoint: Add interrupt for GPIO controller in ACPI deviceDuncan Laurie
The GPIO controller uses IRQ14 as an active high level triggered source for GPIOs that are configured to trigger shared interrupt. This was also tested on bolt by configuring the touchscreen to use a shared GPIO interrupt: localhost ~ $ grep atmel_mxt_ts /proc/interrupts 54: 24 188 93 124 LP-GPIO-demux atmel_mxt_ts Change-Id: I3765120112bae11407e5b2020399d0d0b8e3cef8 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/171901 Reviewed-by: Aaron Durbin <adurbin@chromium.org> (cherry picked from commit 63a0c80ce5a19410d0608fede5a9fe0ec1c8e5c1) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6541 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:13:46 +0000