summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-03-29CBMEM CONSOLE: Add code using the new console driver.Vadim Bendebury
The new added code is compiled in when the CBMEM_CONSOLE config flag is enabled. Change-Id: Ifd1f492ce6321412a014333babbc5b3f14635988 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/721 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29CBMEM CONSOLE: Add CBMEM type for console buffer.Vadim Bendebury
Add CBMEM type for the console buffer section. Change-Id: I02757c06d71e46af77b02b90b0e6018a37b62406 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/720 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29CBMEM CONSOLE: Add CBMEM console driver implementation.Vadim Bendebury
The CBMEM console driver saves console output in a CBMEM area, which then is made available to Linux applications for perusing. There are some system limitations which need to be worked around to achieve this goal: - some console traffic is generated before DRAM is initialized, leave alone CBMEM initialized. - after the RAM based stage starts, a lot of traffic is generated before CBMEM is initialized. As a result, the console log lives in three different places - the bottom of the cache as RAM space, the CBMEM buffer (where it is expected to be) and a static buffer used early in the RAM stage. When execution starts (in the cache as RAM mode), the console buffer is allocated at the bottom of the cache as RAM memory address range. Once DRAM is initialized, the CBMEM structure is initialized, and then the console buffer contents are copied from the bottom of the cache as RAM space into the CBMEM area right before the cache as RAM mode is disabled. The src/lib/cbmem_console.c:cbmemc_reinit() takes care of the copying. At this point the cache as RAM memory is about to be disabled, but the ROM stage is still going generating console output. To make sure this output is not lost, cbmemc_reinit() saves the new buffer address at a fixed location (0x600 was chosen for this), and the actual "printing" function checks to see if the RAM is already initialized (the stack is in RAM), and if so, gets the console buffer pointer from this location instead of using the cache as RAM address. When the RAM stage starts, a static buffer is used to store the console output, as the CBMEM buffer location is not known. Then, when CBMEM is reinitialized, cbmemc_reinit() again takes care of the copying. In case the allocated buffers are not large enough, the excessive data is dropped, and the copying routine adds some text to the output buffer to indicate that there has been data lost and how many characters were dropped. Change-Id: I8c126e31db6cb2141f7f4f97c5047f39a8db44fc Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/719 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29CBMEM CONSOLE: Add config option for CBMEM stored console log.Vadim Bendebury
Some experiments have demonstrated that total amount of text generated by coreboot console when BIOS_SPEW level is enabled exceeds 40KB. Console output generated before DRAM is initialized can exceed 2KB. This patch introduces the new configuration option and assigns adequate default values to cache based and DRAM based console buffers. BUG=chrome-os-partner:4200 TEST=manual . run the following commands in the root directory cp config.stumpy .config make menuconfig . enable the new option (Console->Send console output to a CBMEM buffer) . save the configuration Observe the following settings added to the config: +CONFIG_CONSOLE_CBMEM=y +CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0xae00 +CONFIG_CONSOLE_CAR_BUFFER_SIZE=0xc00 Change-Id: I209603f516244ae136631e6281ba21ebc6fb1710 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: https://gerrit-int.chromium.org/5855 Tested-by: Vadim Bendebury <vbendeb@google.com> Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/718 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-29Increase CBMEM to accommodate larger console.Vadim Bendebury
This change adds 128K to the memory amount set aside for CBMEM in case the CBMEM console is enabled (to keep the CBMEM 128K byte aligned). The console buffer size is being set to 64K, which is enough to accommodate the most verbose coreboot console and u-boot console. Change-Id: If583013dfb210de5028d69577675095c6fe2f3ab Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/725 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-28Add cmos helper functions for reading/writing a dwordDuncan Laurie
These get used later for saving/restoring the MRC scrambler seed values on each boot. Change-Id: I6e23f17649bea6d22c4b279ed8d0e5cb6c0885e7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/717 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-28selfboot: Allow loading SeaBIOS into a reserved region in the lower 1MBStefan Reinauer
This fixes loading SeaBIOS when lower memory is reserved. Change-Id: Idbdcaf95f3307f97307f304d6d677406d059927d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/732 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-28Include arch/acpi.h instead of manually adding acpi_slp_type.Stefan Reinauer
acpi_slp_type is defined in arch/acpi.h, so let's use that instead of manually spreading extern u8 acpi_slp_type throughout the code. Change-Id: Ia5eb420364c15ab5a764bc328bbd201ca9cb7837 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/714 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-28Add timestamp collecting to coreboot.Vadim Bendebury
This patch adds code to initialize the time stamp collection facility in coreboot. It adds a table in the CBMEM section, which provides the base timer reading value (all other readings are offsets of this one) and an array of timestamp id/timestamp value pairs. Just two values are being added now, this will have to be used more extensively and also integrated into payloads to provide more comprehensive boot process time measurements. Also, since the CBMEM area could already contain a section (from the previous run, before reset), when processing a section addition request we should check if a section already exists and return its address, if so. Change-Id: I7ed9f5c400bc5432f228348b41fd19a67c36d533 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/713 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-28Add a config flag to enable time stamp collectionVadim Bendebury
Add a new flag, make it dependent on EARLY_CBMEM_INIT Change-Id: Idbebcaf298238f31a73e9eb4a9af7b03e857bc74 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/712 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-28Initialize CBMEM early.Vadim Bendebury
We want to be able to share data between different phases of firmware (rom stage/ram stage/payload). Coreboot CBMEM seems an appropriate location for this data, but normally it is not initialized until coreboot reaches the ram stage. This change initializes the CBMEM while still in rom stage in case CONFIG_EARLY_CBMEM_INIT is set. Note that there is a discrepancy in how coreboot determines the size of DRAM at rom and ram stages, get_top_of_ram() is used at rom stage and is not defined for all platforms. Those platforms will have to define this function should they enable the CONFIG_EARLY_CBMEM_INIT flag. Change-Id: I81691d45e28de59496fb227f2cca4e8c15ece717 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/711 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-28Introduce config option to initialize CBMEM early.Vadim Bendebury
We want to be able to communicate information between rom and ram stages of coreboot. This configuration option will be used to compile such ability in. Change-Id: I6736fdc264ecd0b63369b28462d7bb96e4c2b012 Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/710 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-27Add bifferboardRudolf Marek
This commit adds support for Bifferboard, a 32MB 486 PC Change-Id: Iad790ebf242ef07bf6298f8e3577783e5e743113 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/810 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-27Add 64KB romchip chip sizeRudolf Marek
This is handy for bifferboard to provide same size as original bootloader. Change-Id: I179917d8c6354fa55cebdd70918a96cd299c4f3c Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/809 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-27Add support for RDC R8610 SouthbridgeRudolf Marek
So far it just setups things right for Bifferboard. We may change it in the future to fit other hardware. Change-Id: I1c4ccff4e47b9cb9e31a738f038fc4f4ebe59087 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/808 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-27Add the support for RDC R8610 NorthbridgeRudolf Marek
So far the it just setups the internal resource management for coreboot and detects the memory size. Change-Id: I8506390fa6656abfa40d92b8f6ede9b91fe98680 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/807 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-27Add RDC R8610 PCI IDs.Rudolf Marek
Change-Id: I3f3585f15265aa1377f72ba23accf1adb08cb8ac Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/806 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-26Disable the GDB stub by defaultRudolf Marek
I would prefer to see the exception dump on serial rather than cryptic GDB protocol. Change-Id: Ib25513d33e6a31da24586fecb00adb5206bb43bd Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/811 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-03-25Fix possible deadlock on SMP stop_this_cpuKyösti Mälkki
Do not use printk on the running thread after it has been sent the INIT IPI, execution may halt with console spinlock held. Change-Id: I64608935ea740fb827fa0307442f3fb102de7a08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/776 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-25Intel cpus: Fix deadlock on hyper-threading initKyösti Mälkki
Only the BSP CPU was able to start its hyper-threading CPU siblings. When an AP CPU attempts this it calls start_cpu() within start_cpu(), deadlocking the system with start_cpu_lock. At the time intel_sibling_init() is run, the BSP CPU is still walking the cpu_bus linked list in lapic_cpu_init: start_other_cpus(). A sibling CPU appended at the end of this list will get started. Also fail compile with #error if SERIAL_CPU_INIT==0, as microcode updates on hyper-threading sibling CPUs must be serialized. Tested with HT-enabled P4 Xeons on dual-socket604 platform. Change-Id: I0053f58f49ed604605ce0a55e826d3e1afdc90b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/775 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-25Makefile: rename linker intermediate variableKyösti Mälkki
Renamed CONFIG_ROMBASE to ROMSTAGE_BASE and removed it from Kconfig. Removed no-op calculation in ldscript. Change-Id: I53d39b60f07db76c8537b3133e59360687b9d4a7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/802 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-25Replace ramtest pattern to assist in DIMM configurationKyösti Mälkki
This is developer's testtool. Output from a "rotate ones" -style pattern helps figure out how DIMM addresses are encoded or routed on a certain mainboard. Scattered test should cover every data and address lines on the memory bus, but is probably limited to the first bank of first DIMM. Change-Id: I533a7a873bcc434f99e7faed9dc9337d9ab64196 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> [pg: rebase] Reviewed-on: http://review.coreboot.org/294 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-24i82801gx: Support power-on-after-power-fail betterPatrick Georgi
Changing CMOS value for power-on-after-power-fail was only honored after reboot, which is counter intuitive (set from "enable" to "disable", power-off, replug device -> device turns on; and similar cases). Change-Id: If1d88c1c34c3333b636ed3ec1e1fb9bea394e615 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/444 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-24i82801gx: Use CMOS variable if available for power-on on power failurePatrick Georgi
We used a hard coded value for some reason. Don't do that, but use CMOS instead. Change-Id: Ib83aa07a3e55bed075150354a060317ebc9d5ba7 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/443 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-24printf: Remove some L modifier usesPatrick Georgi
We use the L modifier in a non-standard way (for long long instead of long double, which we have no business with). clang complains, to reduce its use, to make emulation/qemu-x86 happier. Long term, we should consider eliminating public uses of 'L' (but internal use in vtxprintf to denote long long is fine) Change-Id: If9a17d9ae9925cdc8736445e7d5eedc59c7028c6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/781 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-20Avoid using CPUID in SMBIOS tables. Check for CPUID otherwise claim 486 ↵Rudolf Marek
class cpu. Change-Id: Ic7c4452a1b55bae0cefee118003540ec39ef9fd4 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/683 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-17Another indirection for normal/fallback bootblockPatrick Georgi
Provide a way to redefine the names of normal and fallback via CBFS. This way updates can use some more expressive naming scheme (numbers, dates, version numbers) and replace the coreboot-stages file to point to the new version (with the current version as new "old"). If coreboot-stages doesn't exist, the default behaviour remains to use "normal" and "fallback". Change-Id: I77c134d79ed95831ad5098b7663c15e95d3b5a2a Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/589 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-17Intel cpus: Include CAR from socketKyösti Mälkki
It was not obvious which CAR was compiled in. Also build would fail if a socket included two models with both having an include for CAR. Change-Id: I000c2e24807c3d99347a43d120333c13fbf91af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Fam15 CBMEM allocationStefan Reinauer
The Fam15 northbridge.c had hardcoded the CBMEM size. It should use the one in cbmem.h instead. Change-Id: I8a00e05884bdb1d1a4a012433b0adfbb9eb22983 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/796 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-16Fix AMD Fam12 CBMEM allocationStefan Reinauer
The Fam12 northbridge.c had hardcoded the CBMEM size. It should use the one in cbmem.h instead. Change-Id: I1eca18e21fa59ae32e802d8452e42e8b7a3575cf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/795 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-16Fix AMD Fam10 CBMEM allocationStefan Reinauer
The Fam10 northbridge.c had hardcoded the CBMEM size. It should use the one in cbmem.h instead. Change-Id: Id6c4128d8f5f6a417f83daa3a39b2bfc8e810f8a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/794 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-16AMD Agesa: delete no-op bootblock filesKyösti Mälkki
Removes files: src/northbridge/amd/agesa/family10/bootblock.c src/northbridge/amd/agesa/family12/bootblock.c src/northbridge/amd/agesa/family14/bootblock.c src/northbridge/amd/agesa/family15/bootblock.c Change-Id: Ic3617a673b38d065ca272c4de8ef765ecd3f98b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/793 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Rename AMD_AGESA to CPU_AMD_AGESAKyösti Mälkki
Also any CPU_AMD_AGESA_FAMILYxx selects CPU_AMD_AGESA, so remove the explicit selects from the mainboards. Change-Id: I4d71726bccd446b0f4db4e26448b5c91e406a641 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/792 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Agesa leaking KconfigKyösti Mälkki
Kconfig leaked XIP_ROM_SIZE to other platforms and also defined obsolete option XIP_ROM_BASE. Alias AMD_AGESA as NORTHBRIDGE_AMD_AGESA. Break the circular dependency with family15 Kconfig. Change-Id: Ic7891012220e1bef758a5a39002b66971d5206e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/773 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16ROMCC boards have no XIP limitPatrick Georgi
So set their XIP configuration to ROM_SIZE. Change-Id: I6c1abccec3b1d7389c85df55343ff0fc68a61eec Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/797 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-03-16Use search path when building dependenciesPatrick Georgi
clang is more picky on that. Change-Id: Iaa8472beb6e275c39037d11e1a72dbb80d46424b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/779 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-16xchg is atomic with side-effectsPatrick Georgi
clang doesn't know about the side effect, so we have to tell it that it's okay not to care about the result. Change-Id: Ib11890bff6779e36cf09c178d224695ea16a8ae8 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/783 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-16Intel northbridge I945: Apply un-written naming rulesKyösti Mälkki
Use NORTHBRIDGE_INTEL_I945 to select the driver directory for build. Use _SUBTYPE_945GC and _SUBTYPE_945GM to define at compile-time which model of I945 the driver is built for. Change-Id: I11b1e0998d0fc28f8946bad4f0989036a9b18af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/684 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Via Epia-N and C3: Set ioapic delivery type in KconfigPatrick Georgi
The original comment says it's a Via C3 and not Epia requirement to deliver IOAPIC interrupts on APIC serial bus. Change-Id: I73c55755e0ec1ac5756b4ee7ccdfc8eb93184e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/435 Tested-by: build bot (Jenkins)
2012-03-16VIA southbridge K8T890: Apply un-written naming rulesKyösti Mälkki
Use separate Kconfig option to select a driver directory for build and the specific type of southbridge to support. Change-Id: I9482d4ea0f0234b9b7ff38144e45022ab95cf3f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/685 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix address of IDT in real-mode entryKyösti Mälkki
In a case of CS & 0x0fff != 0x0, lidt memory operand does not point to nullidt, this can raise an exception and shutdown the CPU. When an AP CPU receives 8-bit Start-Up IPI vector yzH, it starts execute at physical address 000yz000H. Seems this translates to either yz00:0000 or y000:z000 (CS:IP), depending of the CPU model. With the change entry16.inc is relocatable as the commentary suggests and can be used as ap_sipi_vector on SMP systems. Change-Id: I885a2888179700ba6e2b11d4f2d6a64ddea4c2dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/707 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Fam14 cbmen allocationMarc Jones
The Fam14 northbridge.c had hardcoded the cbmem size. It should use in cbmem.h instead. Change-Id: I910329fc98a4cf04dc81ef66f3aa05a1916f5b1d Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/790 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-03-15Clean up whitespace in fam14 northbridge.cMarc Jones
Change-Id: Id7947d7f3c67fdda67861065b1bc7a519b97208f Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/789 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-14Since cbfs_core.h provides a macro that uses ntohl, make sure ntohl is availableGabe Black
Since cbfs_core.h provides a macro that uses ntohl, make sure ntohl is available by including byteorder.h Change-Id: I9ab8cb51bd680e861b28d5130d09547bb9ab3b1f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/709 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-14AGESA family 12 changes to fix torpedo warningsMartin Roth
Fixes the warnings generated in the torpedo mainboard build by AGESA. Removing broken tests. Change-Id: Ib444fa2bf4dd94cadb4ce33040eb5650d1c0325b Signed-off-by: Martin L Roth <martin@se-eng.com> Reviewed-on: http://review.coreboot.org/667 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-13Union Station: Fixes to turn on HDMIFrank Vibrans
This commit includes the changes to enable the HDMI on Union Station. The changes switch the output from the display port to the HDMI. Change-Id: I4e15ff6db7d056f156791ff1406d4bae35ff2767 Signed-off-by: Frank Vibrans <frank.vibrans@se-eng.com> Reviewed-on: http://review.coreboot.org/788 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-13Union Station: Remove SIO supportFrank Vibrans
Because the Union Station platform doesn't have an SIO chip, this commit removes the Fintek SIO support. Change-Id: Idba4222ce136821dee2530a72d1630eb5ad613a2 Signed-off-by: Frank Vibrans <frank.vibrans@se-eng.com> Reviewed-on: http://review.coreboot.org/787 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-03-11No need to setup include paths with .s filesPatrick Georgi
They're already preprocessed, and clang whines. Change-Id: I57fe936f84a2fe1aa50ee8510fef606f2ed2ea23 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/782 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-11malloc: size is unsigned, don't test for size < 0Patrick Georgi
clang complains Change-Id: Ifadf73cf377c0d1808e20731803e01101bad7e1d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/780 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-11mainboard/aopen/Kconfig: remove extra whitespacePatrick Georgi
Change-Id: I69ee67c35113d98e034bdccf5d00e8452d3d9bd2 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/778 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-10If the memory mapped UART isn't present, leave it out of the cb tables.Gabe Black
This way u-boot won't try to use a UART that isn't plugged in. Change-Id: I9a3a0d074dd03add8afbd4dad836c4c6a05abe6f Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/729 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2012-03-09Increase size of the coreboot table areaStefan Reinauer
Packing a device tree into the coreboot table can easily make the table exceed the current limit of 8KB. However, right now there is no error handling in place to catch that case. Increase the maximum memory usable for all tables from 64KB to 128KB and increase the maximum coreboot table size from 8KB to 32KB. Change-Id: I2025bf070d0adb276c1cd610aa8402b50bdf2525 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/704 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Fix compilation when USE_OPTION_TABLE is not defined.Duncan Laurie
Change-Id: Id622e4e96b6c8e87b00a96c324a0b4dbfac3391d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/702 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Fix coreboot table size calculations.Vadim Bendebury
The code when reporting the coreboot table size did not account for the last added table record. This change fixes the problem. . rebuild coreboot, program it on the target, restart it . look for 'Wrote coreboot table at:' in the console log . observe the adequate table size reported $ grep 'Wrote coreboot table:' /tmp/cb.log Wrote coreboot table at: 00000500, 0x10 bytes, checksum c06f Wrote coreboot table at: 7f6fc000, 0x1a73 bytes, checksum 3e45 $ Change-Id: Ic55501a4ae06fab2bcda9aea58e362325f2edccf Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/703 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Clean up use of CONFIG_ variables in coreboot_table.cStefan Reinauer
CONFIG_ variables are used inconsistently within the file src/arch/x86/boot/coreboot_table.c. #ifdef will do the wrong thing if the option is disabled. #if (CONFIG_FOO == 1) is not needed. Change-Id: Ifcac6ceac5fb34b931281beae500023597b3533b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/701 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-03-09Fix dependency problem for uart8250.c as wellStefan Reinauer
If you build in parallel, option_table.h will occasionally not be there yet and the build will fail. Change-Id: I828956ab2e05c48d20c2f7c55616cc8fa19e1227 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/698 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-09Fix compilation with CONFIG_USE_OPTION_TABLE enabledStefan Reinauer
Change-Id: I6c5d973442bc1770702180a8964f1bf6ed6062ed Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/696 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Add helper function to find a Local APIC by ID in the device tree.Duncan Laurie
Change-Id: Ie2d7d8e1f647a0c92d2de09e32454fbea688b1e7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/695 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Don't try to compute I/O for empty sub buses.Stefan Reinauer
I am not sure if the sub bus being 0 is a problem, or if the assumption there has to be at least one non empty link is just wrong. It certainly does not hurt to add a small consistency check in either case. Change-Id: I098446deef96a8baae26a7ca1ddd96e626a06dc5 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/693 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09OXPCIe: Reinitialize UART after pci_dev_set_resources()Stefan Reinauer
... and only pull in early init code if the OXPCIe is used for console. Change-Id: I01feca3b9e8376a75c17554ba1bd200d523dff8d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/692 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09move console includes to central console/console.hStefan Reinauer
Because it's included everywhere anyways. Change-Id: I99a9e6edac08df57c50ef3a706fdbd395cad0abc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/691 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Add support for the Startech PEX1XS1PMINIStefan Reinauer
It has a smaller footprint than the already supported MPEX2S952 Change-Id: Ie36b67f9628882d516ca34ff164f0e8918955a5b Signed-off-by: Stefan Reinauer <reinauer@google.com> Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/690 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-09Don't run any Option ROMs stored outside of the system flashStefan Reinauer
Right now coreboot only executes VGA Option ROMs. However, this is not good enough. For security reasons we want to execute only Option ROMs stored in our r/o CBFS. This patch adds a new option to disable execution of arbitrary Option ROMs. Also fix the capitalization of Option ROM in src/devices/Kconfig Change-Id: I485291c06ec5cd1f875357401831fe32ccfc5f2f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/730 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-09Add an implementation for the memchr library functionGabe Black
Change-Id: Icded479d246f7cce8a3d2154c69f75178fa513e1 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/708 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-08Don't run VGA option ROMs on S3 resume.Stefan Reinauer
This will save us a few 100 ms on resume. Change-Id: Iabf4c8ab88662ba41236162f0a6f5bd80d8c1255 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/715 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-08Add support for A-Open DXPL Plus-U motherboardKyösti Mälkki
This is an old (pre-2005) entry-level server mainboard. The code is adapted from mainboard/intel/xe7501devkit. Featured chips: - Dual socket604 - E7505 northbridge - 82801DB southbridge (with EHCI debug port) - 82870p2 PCI-X bridge - LPC47M102S-MC super-io - 512kB FWH flash (flashrom does the job well) What works: - Dual-Xeon P4/HT boot with microcode update - RAM: registered ECC DDR266 in dual-channel - PCI-X slot interrupts with ACPI and I/O apic - On-board PCI-X GbE and SCSI - ACPI power-off and wakeup with PME# Notes : - Current ACPI is more or less a mess - Interrupts do not route correctly with PIRQ - MP-table is not implemented - Issues with reboots remain (cold and warm) - Many superio devices are disabled by default - Audio codec is not investigated Change-Id: I02d18c83f485a09ada65dde03bcc86e9163f2011 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/303 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-07selfboot: drop dead codeStefan Reinauer
As a left over from elfboot times, selfboot keeps the segments to load in the order in which they appeared in the original file as well as in the order they will later appear in memory. This is not needed in selfboot, so drop the code and structure members that handle the in-file order. Change-Id: I6be7a3a1bdf717fec1ee8e5b3227c63150580b41 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-02Fix ECC disable option for AMD Fam10 DDR2 and DDR3.Marc Jones
The logic was backwards on the ECC enable/disable option. Also added better debug output when the debug RAM init feature is enabled. Change-Id: I60bffb6149d96cac65011247ef51cd06ed2210c6 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/670 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-01Rename vendor identifiers in KconfigPatrick Georgi
Board identifiers use them without underscore, too. Unify that. Change-Id: I146384ef6dbe601ad131dada8224f43e6c18433d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/674 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-29Fix x86 cpu_phys_address_sizeKyösti Mälkki
After CPUID, requested feature flag is in edx, not eax. Change-Id: I9ce27c22186f17cc64986be342d7d1ac78a79898 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/688 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
2012-02-29AMD southbridge: remove sp5100Kyösti Mälkki
Southbridge SP5100 support was compiled with SB700 code, but static device info structure would use sp5100/chip.h. To solve this drop support for separate chip sp5100 and adjust the relevant Kconfig options. Removes chip directory: src/southbridge/amd/sp5100/ Rename Kconfig option from: SOUTHBRIDGE_AMD_SP5100 to: SOUTHBRIDGE_AMD_SUBTYPE_SP5100 Change-Id: I873c6ad3624ee69165da6ab7287dfb7e006ee8e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/679 Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-27asus/m4a785t-m: correct the CPU microcode patch selectionDenis 'GNUtoo' Carikli
Thanks to ruik on #coreboot Freenode IRC channel for explaining to me how to get the cpu revision: Feb 21 22:07:32 <ruik> ruik@ruik:~/coreboot$ cpuid | grep ^00000001 Feb 21 22:07:32 <ruik> 00000001 00020f32 00020800 00000001 178bfbff [..] Feb 21 22:07:44 <ruik> the 20f32 is mine CPUID The rest was just looking at the correspondance in src/cpu/amd/model_10xxx/update_microcode.c like Marc Jones explained(thanks Marc Jones) in the mailing list here: http://www.coreboot.org/pipermail/coreboot/2012-February/068332.html Change-Id: Ie0f004990e6b65456de009a4dcc306498bdb47e9 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/669 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
2012-02-24Ati video: Apply un-written naming rulesKyösti Mälkki
Rename Kconfig to match directory name. Change-Id: Idebc203bbc9a02599dfc3e65be021aa9e1b23d61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-23Revert "Fix multipleVGA cards resource conflict on Windows"Marc Jones
This reverts commit 8660a1aa56caeb31bfaf15464285ca650638515e This commit has been found to cause problems with vbios and option rom init in seabios. It has been found by several people and requires more analysis before being recommitted. Change-Id: Ie5f54e417e7a0d8bd8ca4c0a573976afeaa9e230 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/671 Tested-by: build bot (Jenkins) Reviewed-by: Denis Carikli <GNUtoo@no-log.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-22amd/sb600: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I16b27e40ca1a201b2f968f8ce303eaafe43804c0 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/660 Tested-by: build bot (Jenkins)
2012-02-22Remove old AMD fam10 fixme commentMarc Jones
The family10 code had a very slow decompress before the cache settings were fixed. This has been fixed for some time. Remove all the old messages from the serial stream. Change-Id: I476efe1a430f702af394734f354ff69bd053f1d2 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-20Force SB600 bootblock to use I/O for PCI configDave Frodin
If PCI config cycles use MMIO instead of I/O in the SB600 bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O and configures the southbridge decode range to what is defined by the mainboards Kconfig. Change-Id: I85297237f32f37b3fc1ff5b488cca0a43bcf20fd Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/632 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Force SB700 bootblock code to use I/O for PCI config cycles.Dave Frodin
If PCI config cycles use MMIO instead of I/O in the SB700 bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O and configures the southbridge decode range to what is specified by the mainboards Kconfig. Change-Id: I15a89a27645edf594d14ef20f129f75a315e9672 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/631 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Force SB800 bootblock to use I/O for PCI configDave Frodin
If PCI config cycles use MMIO instead of I/O in the bootblock code the cycles will go nowhere since the MMIO feature hasn't been configured yet. This change forces the cycles to use I/O. Change-Id: I93dec45f7cd6764cef7736c774a4d4e61bf7d7e0 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/630 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Fix MTRR TOM2 WB cache setup for AMD CPUs > revF.Marc Jones
The MTRR check for WB TOM2 setting was only checking revF, not extended family revisions. All families above revf indicate 0xf in the family field and have additional bits in the extended family field. Change-Id: I93d719789acda6b7c42de7fd6d4bad2da866a25f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/627 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Torpedo mainboard changes to fix warnings.Martin Roth
Fixes the warnings generated in the torpedo mainboard build. Most of these changes are similar to fixes already implemented in the persimmon mainboard. Change-Id: Ib931be51c0e6448c00c8cfeb13073e1f392582a5 Signed-off-by: Martin L Roth <martin@se-eng.com> Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/634 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Fixes Fam10/SR5650 cpu not recognized message.Dave Frodin
Extend the Family10 revisions checked byt the printk message. Change-Id: Ia94daeefb1aabfb128c577b1e0aa52cf63d5cf44 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20IEI-Kino Fam10 MPtable fix.Dave Frodin
Make changes to MPtable to match the ACPI tables. Change-Id: Icc18c9a25695d01d88d6ee5367064d527cc42bc1 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/629 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20IEI Kino Fam10 ACPI table fixes.Dave Frodin
Fix the ACPI IRQ routing. Also, fix the SSDT generations and TOM2 fixup. Change-Id: Ica4a992d11bab63a510238dcd468b9fe80136def Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/628 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ibfb7b294aa5007ac2f767d85e090572f85148bad Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/661 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17intel/i82801cx: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ifba0b65d81af60774f368d151e935ae1cc768336 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/662 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17sis/sis966: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I9762ef01fc10c453ef643599c1c5dc8ee78081c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/663 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17intel/i82801ex: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I83105e92d1cc5d2d12aede564a1ab9c5d912ac56 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/664 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17intel/sch: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I521deecf58e5d5de303f1ef2f5ff7e965294de18 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/665 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17amd/sb800: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. (cimx/sb800 is a "different" chipset) Change-Id: If7cf2a141a1f2df60f687c51fbd760aa405c8480 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/666 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17broadcom/bcm5785: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Id95660f088c8240606d45abf326cd5eefca30da3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/658 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17Avoid ../../.. paths in ASL filesPatrick Georgi
The current directory is always part of the search path of cpp when using #include "..." Change-Id: I74fe39e0c79835e4b9a927afcbeab21040d8ae52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/648 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Rename i945 ACPI files to not carry an i945_ prefixPatrick Georgi
In the spirit of the earlier renames. Change-Id: I458a42c79a164483120169d1822ffa6861cc3aff Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/647 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17nvidia/ck804: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree ck804-using board has it not selected, so move selection from boards to southbridge. Change-Id: I3064b406cfd5ad18067c597bd5b5866a720f7e87 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/657 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17amd/amd8111: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree amd8111-using board has it not selected, so move selection from boards to southbridge. Change-Id: Iabbaa4cd2fd367ed6decec7ef5cdcbae3b264d52 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/654 Reviewed-by: Marc Jones <marcj303@gmail.com> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:25:03 +0000