summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-03-04uart8250mem: Unify calls with generic UARTKyösti Mälkki
NOTE: UART base for SMM continues to be broken, as it does not use the address resource allocator has assigned. Change-Id: I79f2ca8427a33a3c719adfe277c24dab79a33ef3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5235 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250io: Unify calls with generic UARTKyösti Mälkki
Change-Id: I6d56648e56f2177e1d5332497321e718df18300c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5234 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04console: Fix includesKyösti Mälkki
Do not pull in console hw-specific prototypes everywhere with console.h as those are not needed for higher levels. Move prototypes for UARTs next to other consoles. Change-Id: Icbc9cd3e5bdfdab85d7dccd7c3827bba35248fb8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5232 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04pl011 UART: Move under drivers/uartKyösti Mälkki
Currently this is only a minimal stub to get console on qemu-armv7. Change-Id: I3f20b7f944bc7d0e5ace9d22198d4c16a3839d2c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5162 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04ti/am335x: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. The hardware reference on BeagleBone is from a 48 MHz oscillator input. With pre-divisor of 16 we get same register values as in table 19-25. Change-Id: I89aee27c958f8618ce79a968ae7520a867e7e8a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04allwinner/a10: Fix baudrate calculationKyösti Mälkki
UART input clock is platform dependent. Also account for possible use of get_option() where baudrate is not compile-time constant. Change-Id: Ie1c8789ef72430e43fc33bfa9ffb9f5346762439 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5289 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04samsung/exynos5: Fix baudrate calculationKyösti Mälkki
Account for possible use of get_option() when baudrate is no longer compile-time constant. Change-Id: Ib45acd98e55c5892dbce9903830665aefeda5be0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5288 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04option: Add arch-agnostic get_option()Kyösti Mälkki
We should not have pc80/ includes in console/. Change-Id: Id7da732b1ea094be01f45f9dbb49142f4e78f095 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5157 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart8250: Fix and unify baudrate divisor calculationKyösti Mälkki
Divisor is a function of requested baudrate, platform-specific reference clock and amount of oversampling done on the UART reference. Calculate this parameter with divisor rounded to nearest integer. When building without option_table or when there is no entry for baud_rate, CONFIG_TTYS0_BAUD is used for default baudrate. For OxPCIe use of 4 MHz for reference was arbitrary giving correct divisor for 115200 but somewhat inaccurate for lower baudrates. Actual hardware is 62500000 with 16 times oversampling. FIXME: Field for baudrate in lb_tables is still incorrect. Change-Id: I68539738469af780fadd3392263dd9b3d5964d2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5229 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Drop HAVE_UART_MEMORY_MAPPEDKyösti Mälkki
This option is used to make uart8250mem option visible in menuconfig. Showing it for these ARMs is incorrect. Change-Id: I2c28e1c3781df41c09c365355a5105c9fe4945ed Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5259 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04uart: Do not guard entire include file by config optionsKyösti Mälkki
Do not guard the file by CONFIG_CONSOLE_SERIAL8250 or CONFIG_CONSOLE_SERIAL8250MEM or CONFIG_CONSOLE_SERIAL. Don't do indirect includes for <uart8250.h>. The config-specific options are already properly guarded, and there is no need to guard the register and bit definitions. Change-Id: I7528b18cdc62bc5c22486f037e14002838a2176e Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-04jetway/nf81-t56n-lf: Minor corrections to devicetree.cbEdward O'Callaghan
The miniPCIe ports hanging off 15.0 are infact x1, as are the two onboard NIC's on 6.0 and 15.0. Change-Id: I6247838f6b5823369543e338975a4c5c6fd00d7c Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5328 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04jetway/nf81-t56n-lf: Fix PS/2 ACPI for KBC & Mouse.Edward O'Callaghan
Provide ACPI table node so that the PS/2 keyboard/mouse port works in GNU/Linux. Change-Id: If73b8d37a81bb9066cbcc650b518d25e243b84e7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5327 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-04nehalem: Replace video init.Vladimir Serbinenko
Old video init just replayed the sequence. This one actually computes the values. Change-Id: Ic1fe7a2e90dc2cc36ac0d8bcea5cfabc583f09a3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5270 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04drivers/intel/gma: Add EDID retrieving functions.Vladimir Serbinenko
Change-Id: I64f2fcc5ad52d6a0188d02b28769001ada718c4f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5278 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-04bd82x6x, ibexpeak, lynxpoint: Unify SPI.Vladimir Serbinenko
SPI registers didnt change since ICH8. No need to have separate files for them. Unify. Change-Id: I4e2ac3221b419c007e135c9ee615fc3b84424cbc Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5254 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-04ibexpeak/ehci: Set .enable_resources properly.Vladimir Serbinenko
Without this memory decoding isn't activated which, in turn, makes SeaBIOS crash. Change-Id: I3dcc721b500ab7468e1082157eeeed38044462d0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5326 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03coreboot: don't return struct lb_memory * from write_tables()Aaron Durbin
No one is interrogating the write_tables() return value. Therefore, drop it. Change-Id: I97e707f071942239c9a0fa0914af3679ee7a9c3c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5301 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-03-03nehalem: Remove SSKPD.Vladimir Serbinenko
Not really used and conflicts with SSKPD from i915_regs.h Change-Id: I1462457f656310df99e78aee8cbfe0206f6e2a1e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5268 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-03qemu: Support textmode gfx init.Vladimir Serbinenko
Change-Id: I8b6b14b4fcf8df21d8bbf988d640b1efa013bd7f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5283 Tested-by: build bot (Jenkins) Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03devices: Allow to configure textmode in native gfx init.Vladimir Serbinenko
Usefull to select between text mode which offers best compatibility with payloads and gfx mode which makes the best-looking screen. Also right now we have an unfortunate situation when qemu is in gfx mode while most real systems use text mode. Change-Id: Ifad7ba197875edfdd06eb932afeb5800229ef055 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5282 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-03-03lib/selfboot: s_srcaddr is uninitialized.Edward O'Callaghan
s_srcaddr is uninitialized in the BSS section, leading to a garbage valued operand on the LHS of a '<' on line 383. Change-Id: Ie4fec91b09c70fb1d91ad3918ac3f60653fa1d83 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5314 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-03-03coreboot: remove unused get_lb_mem() functionAaron Durbin
The get_lb_mem() is no longer used. Therefore, remove it. Change-Id: I2d8427c460cfbb2b7a9870dfd54f4a75738cfb88 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5304 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03selfboot: use bootmem infrastructureAaron Durbin
Instead of packing and unpacking entries in lb_mem use the bootmem infrastructure for performing sanity checks during payload loading. Change-Id: Ica2bee7ebb0f6bf9ded31deac8cb700aa387bc7a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5303 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03coreboot: introduce notion of bootmem for memory map at bootAaron Durbin
The write_coreboot_table() in coreboot_table.c was already using struct memrange for managing and building up the entries that eventually go into the lb_memory table. Abstract that concept out to a bootmem memory map. The bootmem concept can then be used as a basis for loading payloads, for example. Change-Id: I7edbbca6bbd0568f658fde39ca93b126cab88367 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5302 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03intel/nehalem: Fix soft reset detection.Vladimir Serbinenko
Change-Id: I4575cddc35dc8309372beafec441d194bc145242 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5267 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03intel/nehalem: Use non-powercycle reset.Vladimir Serbinenko
Change-Id: Ibc2421a50e272a580461e4eacec6cfcd38654fe8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5266 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03nehalem/raminit: Don't touch clock generator in raminit.Vladimir Serbinenko
Clock generator is mobo-specific. Don't touch it in raminit. Change-Id: Ie114696b7fb13b8daee8dd1393d43bc609e149b3 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-03-03coreboot: introduce arch_payload_run()Aaron Durbin
The selfboot() function relied on global variables within the selfboot.c compilation unit. Now that the bounce buffer is a part of struct payload use a new architecture-specific arch_payload_run() function for jumping to the payload. selfboot() can then be removed. Change-Id: Icec74942e94599542148561b3311ce5096ac5ea5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5300 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03selfboot: store bounce buffer in struct payloadAaron Durbin
In order to break the dependency on selfboot for jumping to payload the bounce buffer location needs to be communicated. Therefore, add the bounce buffer to struct payload. Change-Id: I9d9396e5c5bfba7a63940227ee0bdce6cba39578 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5299 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03coreboot: use struct payload for selfload()Aaron Durbin
In order to encapsulate more data for self loading use struct payload as the type. That way modifications to what is needed for payload loading does not introduce more global variables. Change-Id: I5b8facd7881e397ca7de1c04cec747fc1dce2d5f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5298 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-03coreboot: move common code to payload_run() from selfboot()Aaron Durbin
The selfboot() routine was perfoming most of the common teardown and stack checking infrastructure. Move that code into payload_run() to prepare removal of the selfboot() function. Change-Id: I29f2a5cfcc692f7a0fe2656cb1cda18158c49c6e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5297 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-03coreboot: unify infrastructure for loading payloadsAaron Durbin
A payload can be loaded either from a vboot region or from cbfs. Provide a common place for choosing where the payload is loaded from. Additionally, place the logic in the 'loaders' directory similarly to the ramstage loader infrastructure. Change-Id: I6b0034ea5ebd04a3d058151819ac77a126a6bfe2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5296 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-03-02vendorcode/amd/agesa/f*: Improve gcccar.inc assembler compatibility.Edward O'Callaghan
A comparison with a two's complement in gcccar.inc has dubious GAS/AT&T notation. Clang miss-parses 0x-1 as an invalid hexadecimal number. Change-Id: I88baa5c2513f062ff309df05916a3832b9bd9bb1 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5277 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-01lenovo/x60: Unify volume button handling with common code.Vladimir Serbinenko
Change-Id: I45fe44a91f9f83a510b204e01dbaff9e8a9696ca Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5099 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-03-01intel/sandybridge: add PCI IDs for 6-Series PCHChris Douglass
The PCI ids are taken from: Intel® 6 Series Chipset and Intel® C200 Series Chipset Specification Update – NDA October 2013 CDI / IBP#: 440377 Change-Id: Ib8418173fd36fd4109b3c4ec0d5543ca8e39ffa6 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5226 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-03-01lenovo/x201: Move mainboard init to mainboard_init.Vladimir Serbinenko
Rather than having it inside mainboard_enable. Change-Id: Ie8bd25eb49b919b4e25c4628e3557fc66b2ba4d9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4840 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-28drivers/spi: Sort SPI flash filesChris Douglass
Change-Id: Id7e65065556ca7225969ca0afdb21eda24aeb967 Signed-off-by: Christopher Douglass <cdouglass.orion@gmail.com> Reviewed-on: http://review.coreboot.org/5260 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-02-27baytrail: use common code for iosf accessorsAaron Durbin
The same sequence is used regardless of the port being read or written. Therefore, use the same implementation for reading or writing to a port. BUG=None BRANCH=None TEST=Built and booted through depthcharge. Dev and recovery screens still work. Nothing bizarre in console output. Change-Id: I1a64b54b50472fa7d601e199653eb4a76accf910 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175441 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4922 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add lpss iosf functions and regsAaron Durbin
The low power subsystem devices have a lot of their configuration done in the IOSF sideband message space. Add support for these access methods. BUG=chrome-os-partner:23790 BRANCH=None TEST=Built and booted through depthcharge. Change-Id: I0dd52b952a16ef1280c29301164db041ee87f636 Signed-off-by: Aaron Durbin <adurbin@chromum.org> Reviewed-on: https://chromium-review.googlesource.com/175440 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4921 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: Fix EHCI function number and XHCI typoDuncan Laurie
BUG=chrome-os-partner:23635 BRANCH=rambi TEST=successfully disable EHCI controller in devicetree.cb Change-Id: I8a22e25a9f7c263d2a6debf0cd1606cb0f6f7645 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175403 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4920 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: increment boot count for elogAaron Durbin
The elog boot counter in cmos was not being initialized nor incremented. Start doing that in romstage. Since S3 resume is not detected yet the increment is unconditional. BUG=None BRANCH=None TEST=Built and booted through depthcharge multiple times. Noted output such as 'Boot Count incremented to 4'. Change-Id: Ic585d4ad4b3af086e0067e28fe0f35c02979bbd2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174717 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4919 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add GNVS to cbmem and set acpi_slp_typeAaron Durbin
The ACPI code was previously complaining about not being able to find the GNVS area: 'ACPI: Could not find CBMEM GNVS'. Fix this by adding GNVS area early in start up. This is also the appropriate place to set the acpi_slp_type variable to indicate an S3 resume or not. BUG=chrome-os-partner:22867 BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted through depthcharge. Noted cbmem has 'ACPI GNVS' entry. Change-Id: Ifbca3dd390ebe573730ee204ca4c2f19626dd6b1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174647 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4918 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: fix uninitialized acpi structuresAaron Durbin
The callers of the following functions assume the storage area provided by the pointers is initialized. That's not the case as these were just place holders. - void acpi_create_intel_hpet(acpi_hpet_t * hpet); - void acpi_create_serialio_ssdt(acpi_header_t *ssdt); To fix this properly initialize the hpet entry, and just remove the serialio_ssdt function entirely. BUG=chrome-os-partner:23505 BRANCH=None TEST=Built and booted through depthcharge on rambi. Noted no more ACPI errors relating to invalid length. Change-Id: If56ab033562ef2d755e9c9de42f507c95d291aba Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174716 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4917 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27baytrail: Add IOSF functions for USBPHY and USHPHYDuncan Laurie
These are needed for USB2 and USB3 PHY init sequences. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=emerge-rambi chromeos-coreboot-rambi Change-Id: Id284d882034e15eceeaa910b8b73bc0d8d895199 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175227 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4916 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27rambi: Enable internal keyboardDuncan Laurie
The EC LPC init function needs to run to enable the internal keyboard. I needed this to confirm that it is just USB keyboards that are causing all sorts of issues. BUG=chrome-os-partner:23635 BRANCH=rambi TEST=boot to recovery screen and hit tab Change-Id: Iea0fc66ba62ea7da71ef83c26e25ae32bef102bd Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/175207 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4915 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: Enable SATA portShawn Nematbakhsh
Enable first SATA port in Rambi device tree. BUG=chrome-os-partner:23643 TEST=TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and kernel is found + booted. Change-Id: Ic0cb5f9ff17ca0f6cc7941f203b9338df200811d Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174916 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4914 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: Add SATA driverShawn Nematbakhsh
Add SATA driver for baytrail platform. BUG=chrome-os-partner:23643 TEST=Manual, in dev mode. Verify on rambi that SATA disk is detected, and kernel is found + booted. Change-Id: I5c13e03203c8f26d233c7d10af8ff6812c460578 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174914 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4913 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27rambi: add all on-board devicesAaron Durbin
Add the on-board devices in the SoC to the device tree. Also, disable the unused devices aside from TXE and HDA. Those particular devices cause the system to shut down when they are disabled. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Noted the calls to the southcluster disable function. Change-Id: I482c1c9609833054aeb2948144af54b57d3df086 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174645 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4912 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-27baytrail: add support for disabling south cluster pci devicesAaron Durbin
When the southcluster pci devices are listed in the devicetree add the ability to perform the proper disabling sequence for turning off devices. This only turns off the pci device interface as well as put the device into D3Hot. It is not yet known how to put the TXE device into D3Hot so it's currently not possible to disable that device. Also, expose the southcluster_enable_dev() function so that other devices can call this if they require doing specific things before disabling the device. The southcluster_enable_dev() is only called on devices found in the devicetree and if they currently have no ops associated with them. BUG=chrome-os-partner:22871 BRANCH=None TEST=Built and booted through depthcharge. Interrogated output to ensure devices were being properly disabled. Change-Id: I537ddcb9379907af2fe012948542b6150a8bf7c5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174644 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4911 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-27baytrail: use MCRX in iosf access functionsAaron Durbin
While most registers accesses don't need the use of the MCRX register (upper 24 bits of address) the MCRX register should be protected. The reference code could be doing accesses to registers that initialized the MCRX register. Thus, any access after that should ensure the MCRX register is initialized appropriately. BUG=None BRANCH=None TEST=Verified assembly output. Also, built and booted through depthcharge. Change-Id: I4d6cfbe6bb1666790c69778b8f2c8baeaf015264 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174643 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-25Kill ALT_CBFS_LOAD_PAYLOADVladimir Serbinenko
Not used anymore. Change-Id: Icf3a4a7f932776981048b805478582ad2b784182 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5132 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-25lynxpoint: Kill alternative cbfs_load_payload.Vladimir Serbinenko
With generic load using 32-bit accesses this is no longer has a huge impact it previously did. It's also unnecessarily component-speficific. Change-Id: I7e8a74ea1ceaa225e1024f9eb43e7280773e2b5a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5131 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-25Remove CACHE_ROM.Vladimir Serbinenko
With the recent improvement 3d6ffe76f8a505c2dff5d5c6146da3d63dad6e82, speedup by CACHE_ROM is reduced a lot. On the other hand this makes coreboot run out of MTRRs depending on system configuration, hence screwing up I/O access and cache coherency in worst cases. CACHE_ROM requires the user to sanity check their boot output because the feature is brittle. The working configuration is dependent on I/O hole size, ram size, and chipset. Because of this the current implementation can leave a system configured in an inconsistent state leading to unexpected results such as poor performance and/or inconsistent cache-coherency Remove this as a buggy feature until we figure out how to do it properly if necessary. Change-Id: I858d78a907bf042fcc21fdf7a2bf899e9f6b591d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5146 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-24intel/*/acpi: Increase range length of MCHBAR buffer to 32 kBPaul Menzel
Linux kernel 2.6.31 reports the warning below on Intel Ivy Bridge (with FSP). resource map sanity check conflict: 0xfed10000 0xfed17fff 0xfed10000 0xfed13fff pnp 00:01 Since Sandy Bridge the length of the MCHBAR is 32 kB and it is already used that way in other places. $ more src/northbridge/intel/fsp_sandybridge/acpi/hostbridge.asl […] OperationRegion (MCHB, SystemMemory, DEFAULT_MCHBAR, 0x8000) […] So instead of 16 kB specify that 32 kB are decoded in that memory range for Intel Sandy Bridge, Ivy Bridge and Haswell. (Linux kernel 3.10 does not warn about that.) Change-Id: Ie7a9356d9051c807833df85e4a806e5a9498473f Reported-by: Norwich in #coreboot on <irc.freenode.org> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/5192 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Werner Zeh Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-02-24baytrail: Enable GFX deviceDuncan Laurie
- Ungate display in PUNIT - Set GSM to 64MB since 32MB is not supported in <C0 stepping - Initialize power management registers in GTT - Execute VBIOS if found BUG=chrome-os-partner:23507 BRANCH=rambi TEST=build and boot to dev screen via HDMI on rambi Change-Id: Idb032c7ea7f16b651b4c921e3429a652fe663a5d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174922 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4907 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: IOSF write functions need to set data before controlDuncan Laurie
The data needs to be available in the register before the control bits are set to make the write happen. BUG=chrome-os-partner:23507 BRANCH=rambi TEST=successfully ungate power on PUNIT on rambi Change-Id: I8fae60d5385ce9a401c1dec9cbb39b70d157a6c2 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174898 Reviewed-by: Stefan Reinauer <reinauer@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4906 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24rambi: add chromeos EC supportAaron Durbin
As rambi has the ChromeOS EC on it the EC needs to be configured properly. Do this along with updating the ChromeOS support for passing on write protect state, recovery mode and developer mode. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted to depthcharge. EC software sync appears to work correctly. Additionaly, 'mainboard_ec_init' appears in the console output. Change-Id: I40c5c9410b4acaba662c2b18b261dd4514a7410a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174714 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: initialize chromeos EC if present in romstageAaron Durbin
The EC needs to be initialized early in romstage. Therefore perform the call after console has been initialized in order to view any messages that the code may spit out. BUG=chrome-os-partner:23387 BRANCH=None TEST=Built and booted with recovery mode and EC in RW. Noted that system reboots the EC. Change-Id: I35aa3ea4aa3dbd9bd806b6498e227f45ceebd7a1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174713 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4904 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: use version 2 of efi wrapperAaron Durbin
Version 2 of the efi wrapper wants the speed of the TSC timer initialized in the parameter structure. BUG=chrome-os-partner:22866 BRANCH=None TEST=Built and booted through depthcharge. No errors spit out by wrapper. CQ-DEPEND=CL:*147256 Change-Id: I9cd265ea6bde93be85fc6fbc905d83af57fc2773 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174712 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4903 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: remove gfx read_resources() work aroundAaron Durbin
Before the special PUNIT settings the GFX pci device had the same device id as the transaction router. This required a special case in the transaction router's driver to do the proper thing for read_resources(). However, that requirement is no longer needed as the PUNIT special message is now being done. Therefore, remove the work around. BUG=None BRANCH=None TEST=Built and looked at resource allocation logs to confirm work around is no longer needed. Change-Id: I90b155cb5560ca3291f146c2f586456e5529f6b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174652 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4902 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: get rid of global microcode_ptrAaron Durbin
A global microcode_ptr was added when doing the MP development work. However, this is unnecessary as the pattrs structure already contains the pointer. Use that instead. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted. Microcode still being loaded correctly. Change-Id: I0abba66fc7741699411d14bd3e1bb28cf1618028 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174552 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4901 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24baytrail: add microcode version 319Aaron Durbin
Update microcode version to 319. BUG=None BRANCH=None TEST=Built and booted. Noted 319 being used. Change-Id: I008f90a1c6b542d979e34da22e9f375224c0ffeb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174551 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4900 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-24jetway/nf81-t56n-lf: Use proper category.Vladimir Serbinenko
"Mini-ITX" was a pure inventional name for category called "mini". Change-Id: I6450fd27c1a7679f252ce7f46f409b7dc459c50d Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5286 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-24TI am335x: Apply Kconfig use conventionsKyösti Mälkki
Change-Id: Ic3c26fd7b1dd8a6731abc9a63b9ca17e084074b2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5291 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2014-02-24CAR_GLOBAL: enforce compiler to check if _start != _endEdward O'Callaghan
There are some fun rules C compilers can use to optimize their code. One of them is the assumption that two symbols point to two different addresses. In this case this wasn't true, resulting in unintended code execution (and later, a crash) with a clang build. Change-Id: I1496b22e1d1869ed0610e321b6ec6a83252e9d8b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/4719 Tested-by: build bot (Jenkins)
2014-02-22device: Do not show "framebuffer graphics resolution" with native init.Vladimir Serbinenko
No native init uses this. Real hardware ones use mode specified in EDID. Qemu one uses CONFIG_DRIVERS_EMULATION_QEMU_BOCHS_[XY]RES. Change-Id: I0845fec10b9811e2be44b5be30b9dc4f1c9719a6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5281 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-21lib/edid: Don't set vbe_valid in decode_edid.Vladimir Serbinenko
Decoding EDID doesn't yet mean that gfx mode is used. Change-Id: Icedd36f26877754f34dd59233cce72271d7f0b19 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5269 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-20usbdebug: Unify console APIKyösti Mälkki
Struct dbgp_pipe would not be suitable for use with xHCI. Just use an index, it is easy to setup in Kconfig if our future debug setup has separate pipes for console output and debugging/traceings. Change-Id: Icbbd28f03113b208016f80217ab801d598d443a8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5227 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-20nehalem: Make SPD address map into parameter.Vladimir Serbinenko
It's mobo dependent. Change-Id: I7a9ba0fb7374a61178e9282acd8f10098435f1fd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5253 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-20nehalem/raminit: Fix typo of NUM_CHANNELS instead of NUM_SLOTS.Vladimir Serbinenko
Change-Id: I0fbfa8cb39881782bec3af5e43ff3c63dd2e4919 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5276 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-20ibexpeak/thermal: set temperature target in early init.Vladimir Serbinenko
Properly determine temperature target and set it in early init rather than hardcoding it in late init. Change-Id: Ie763f205890674a9dd1d9c5974caaccdd67cea14 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5264 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-20intel/model_2065x: Fix APICID generation.Vladimir Serbinenko
APIC IDs always step by 4 on 2065x independently of number of threads. Change-Id: I5abd4005c8ce1740bb0862d952af66236b609aa8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-20SMM: Fixes for DEBUG_SMIKyösti Mälkki
Get the required UART includes directly. The ne2k part is old copy-paste leftover. Change-Id: Ifd9253abb5a50b515887459faf06b63f907eeda9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5258 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-19ibexpeak/lpc: Fix PCIIDs.Vladimir Serbinenko
Add PCIID from Easynote LM85. Remove unrelated IDs inherited from BD82x6x. Change-Id: I03b6e0b2e08a4a6014aa1ef1f8d9a3a567f03ad9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5263 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-02-19printk: support and use %hh prefixPatrick Georgi
clang complains otherwise. Change-Id: I2ac98d7147ecd3d7064f17f8c9d214d44baedf97 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4717 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-02-19x86: only build disassembly with gccPatrick Georgi
The assembler options are specific to the gnu toolchain. Change-Id: I8424767ef186ef2d4c18bfbcae1f54e0da2e4f47 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4715 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-02-19x86 bootblock: improve clang compatibilityPatrick Georgi
Its linker doesn't like "." arithmetics, so use .org, while its assembler doesn't like data32 prefixes. Change-Id: I3f5bbb350493d6510b8013df15d44c44c5db63c7 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/4714 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-02-18lynxpoint: Finalize chipset before playload if not CONFIG_CHROMEOSDuncan Laurie
The Chrome OS environment sends an SMI to finalize the chipset/board at the end of the "depthcharge" payload, but there is no facility to send this command if not using the full ChromeOS firmware stack. This commit adds a callback before booting the payload that will issue this SMI which will lock down the chipset and route USB devices to the XHCI controller. Change-Id: I2db9c44d61ebf8fa28a8a2b260a63d4aa4d75842 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5181 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-02-17console: Add drivers/uartKyösti Mälkki
Also move UART related Kconfig options from top-level file. Change-Id: I4e407977cff6f6506f991600c98d6d264676d3f8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5230 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17rambi: Set VBOOT_RAMSTAGE_INDEX to point to ramstage imageShawn Nematbakhsh
The ramstage image is the third image in the partition (after ECRW hash and depthcharge image). TEST=Manual. Boot rambi, verify that ramstage image is correctly found: "RW ramstage image at 0xffb1dc70, 0x0000f391 bytes" BUG=None. Change-Id: I628db3daf0b109106c51693960487a0c83b4e9f4 Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174540 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4899 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-02-17baytrail: add support to run reference code blobAaron Durbin
The reference code blob is needed to bootstrap certain pieces of hardware in bay trail. Provide the ability to run reference code by loading the reference code as an rmodule. Note that support for vboot verification and S3 resume is omitted from this commit. BUG=chrome-os-partner:22866 BRANCH=None TEST=Built and booted with refcode loading. Change-Id: I30334db441a57f4d87b4de6fca0a9a48e1c05c05 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174426 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4898 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17baytrail: add south cluster fixed resourcesAaron Durbin
The PCU (platform controller unit) contains the resources and IP blocks that used to reside in the south bridge. Bay Trail has since renamed it south cluster. There are quite a few fixed MMIO and I/O resources. If these aren't added the resource allocator will freely assign these addresses which causes conflicts and other subtle bugs. BUG=chrome-os-partner:23544 BUG=chrome-os-partner:23545 BRANCH=None TEST=Built and booted through depthcharge. Verified resource allocation not weird. And no more depthcharge crashes. Change-Id: I697fbda4538c03fded293bcb63a5823b1ed150ec Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174421 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4893 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17lenovo/x201: Fix wrong declaration in devicetree.cbVladimir Serbinenko
Change-Id: I90c6ff14ab819368ccc874008a7fb1410a543984 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5255 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17baytrail: enable monotonic timerAaron Durbin
Enabling the monotonic timer allows for collecting boot stage times as well as each device initialization time. BUG=chrome-os-partner:23166 BRANCH=None TEST=Built and booted. Noted timings in console output. Change-Id: I5fdc703ea21710fd26de352f367c6fc0c767ab6a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/174422 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/4894 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-17src/drivers/spi: introduce AMIC supportIdwer Vollering
Add support for the AMIC A25L032 flash chip. Change-Id: Ie8d441a923c6fbd18c16440b4571321652d934d5 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/5252 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-17vortex86ex: Drop baudrate programming for 10 UARTsKyösti Mälkki
This is responsibility of end-user application. When coreboot does it, it is only for the purpose of debug console. Change-Id: Idbbf9528c60b9b819b7bea9dfe84078a3f055bc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5251 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrew Wu <arw@dmp.com.tw>
2014-02-17sandy/ivy: Fix mrc.cache file in CBFSKyösti Mälkki
The file was not recreated when configuration changed. One would hit this bug when turning CHROMEOS on/off. Also do not create mrc.cache with CHROMEOS at all. Change-Id: I5b0ecde66589396b24967ce289bf65e20bb08825 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5211 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-17ibexpeak/azalia: Remove C4-register extended init.Vladimir Serbinenko
This sequence was derived from BD82X6X and on ibexpeak it inadvertently disables interrupts. In older kernels it wasn't a problem but in new kernel it makes codec probe fail. Change-Id: I40184ae8c4cfe758869af1a1565b88f0a238150e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5074 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-17ibexpeak/sata: Add PCI ID from Easynote LM.Vladimir Serbinenko
Change-Id: I979a40ad3692cd474920f3ee5c6b10c41f75bfdb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/5256 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-02-16baytrail: SMM supportAaron Durbin
Initialize SMM on all CPUs by relocating the SMM region and setting SMRR on all the cores. Additionally SMI is enabled in the south cluster. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi. Tested with DEBUG_SMI and noted power button turns off board while in firmware. Change-Id: I92e3460572feeb67d4a3d4d26af5f0ecaf7d3dd5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173983 Reviewed-on: http://review.coreboot.org/4892 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-02-16haswell: backup the default SMM region on resumeAaron Durbin
Haswell CPUs need to use the default SMM region for relocating to the desired SMM location. Back up that memory on resume instead of reserving the default region. This makes the haswell support more forgiving to software which expects PC-compatible memory layouts. Change-Id: I9ae74f1f14fe07ba9a0027260d6e65faa6ea2aed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5217 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-16x86: provide infrastructure to backup default SMM regionAaron Durbin
Certain CPUs require the default SMM region to be backed up on resume after a suspend. The reason is that in order to relocate the SMM region the default SMM region has to be used. As coreboot is unaware of how that memory is used it needs to be backed up. Therefore provide a common method for doing this. Change-Id: I65fe1317dc0b2203cb29118564fdba995770ffea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5216 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-02-16intel/jarrell: Fix missing includeKyösti Mälkki
To unconditionally get cmos_read(). Change-Id: I0af0e85c8a1f42113bd32b51c4e29e86b3c28112 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5228 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2014-02-16baytrail: bring up APsAaron Durbin
Bring up the APs using x86 MP infrastructure. BUG=chrome-os-partner:22862 BRANCH=None TEST=Built and booted rambi. Noted all cores are brought up. Change-Id: I9231eff5494444e8eb17ecdc5a0af72a2e5208b5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173704 Reviewed-on: http://review.coreboot.org/4889 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16rambi: add BSP lapic deviceAaron Durbin
There's some baked in assumptions internal to coreboot that the BSP's cpu device exists in the device tree. Therefore provide one in the device tree. BUG=chrome-os-partner:22862 BRANCH=None TEST=Compiled and booted with other changes. Change-Id: I22ba10964760ee8efbc5bbd5d4ce65daf31b3839 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173702 Reviewed-on: http://review.coreboot.org/4887 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: Modify GPIO pull-up specification methodShawn Nematbakhsh
Minor style changes to the way GPIO pull-ups are specified in board-specific GPIO maps. Intent is to allow calls to GPIO_FUNC macro from such maps. BUG=chrome-os-partner:22863 TEST=Manual. Build + boot on bayleybay. Change-Id: I80134b65d22d3ad8a049837dccc0985e321645da Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Commit-Queue: David James <davidjames@chromium.org> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/4886 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16rambi: disable internal pullups on ram_id[2:0]Aaron Durbin
The ram_id[2:0] signals have stuffing options for pull up/down with values of 10K. However, the default pulldown values for these pads are 20K. Therefore, one can't read a high value because of the high voltage threshold is 0.65 * Vref. Therefore the high signals are marginal at best. Fix this issue by disabling the internal pull for the pads connected to ram_id[2:0]. BUG=chrome-os-partner:23350 BRANCH=None TEST=Built and checked that ram_id[2:0] is properly read now. Change-Id: Ib414d5798b472574337d1b71b87a4cf92f40c762 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/173211 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-on: http://review.coreboot.org/4885 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: correct MMC pci locationAaron Durbin
The original documentation was incorrect. Fix the pci device for the MMC port to reflect reality. MMC is at 00:17.0 with a device id of 0x0f50. BUG=None BRANCH=None TEST=Built. Change-Id: Ic18665b7dda5f386e72d1a5255e4e57d5b631eb0 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172772 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4884 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-02-16baytrail: fix tsc rateAaron Durbin
Despite some references to a fixed bclk in some of the docs the bclk is variable per sku. Therefore, perform the calculation according to the BSEL_CR_OVERCLOCK_CONTROL msr which provides the bclk for the cpu cores in Bay Trail. BUG=chrome-os-partner:23166 BRANCH=None TEST=Built and booted B3. correctly says: clocks_per_usec: 2133 Change-Id: I55da45d42e7672fdb3b821c8aed7340a6f73dd08 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/172771 Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4883 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 07:11:24 +0000