summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-04-02cpu/x86/mtrr: Make useful MTRR functions available for all boot stagesSubrata Banik
This patch migrates a few useful MTRR functions as below from `earlymtrr.c` file to newly created common stage file `mtrrlib.c`. 1. get_free_var_mtrr 2. set_var_mtrr 3. clear_all_var_mtrr These functions can be used to perform the MTRR programming from IA common code SPI driver as `fast_spi.c` without requiring two separate implementations for early boot stage (till romstage) and for ramstage onwards. BUG=b:225766934 TEST=Able to build and boot google/redrix board to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I2c62a04a36d3169545c3128b4231992ad9b3699d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-02drivers/intel/fsp2_0: Add provision to extract FSP Performance DataSubrata Banik
This patch enriches coreboot FSP2.0 driver to extract the FSP timestamp from FPDT (Firmware Performance Data Table) and display right after FSP-S exits (from `fsp_silicon_init()` function), based on SoC user selects the required `DISPLAY_FSP_TIMESTAMPS` config. The prerequisite to this implementation is to have FSP binary built with `PcdFspPerformanceEnable` PCD set to `TRUE` to allow FSP to populate the FPDT HOB. BUG=b:216635831 TEST=Able to dump FSP performance data with DISPLAY_FSP_TIMESTAMPS Kconfig selected and met the FSP prerequisites. +--------------------------------------------------+ |------ FSP Performance Timestamp Table Dump ------| +--------------------------------------------------+ | Perf-ID Timestamp(ms) String/GUID | +--------------------------------------------------+ 0 460253 SEC/52c05b14-0b98-496c-bc3b04b50211d680 50 460263 PEI/52c05b14-0b98-496c-bc3b04b50211d680 40 460274 PreMem/52c05b14-0b98-496c-bc3b04b50211d680 1 495803 9b3ada4f-ae56-4c24-8deaf03b7558ae50 2 508959 9b3ada4f-ae56-4c24-8deaf03b7558ae50 1 515253 6141e486-7543-4f1a-a579ff532ed78e75 2 525453 6141e486-7543-4f1a-a579ff532ed78e75 1 532059 baeb5bee-5b33-480a-8ab7b29c85e7ceab 2 546806 baeb5bee-5b33-480a-8ab7b29c85e7ceab 1 553302 1b04374d-fa9c-420f-ac62fee6d45e8443 2 563859 1b04374d-fa9c-420f-ac62fee6d45e8443 1 569955 88c17e54-ebfe-4531-a992581029f58126 2 575753 88c17e54-ebfe-4531-a992581029f58126 1 582099 a8499e65-a6f6-48b0-96db45c266030d83 50f0 599599 unknown name/3112356f-cc77-4e82-86d53e25ee8192a4 50f1 716649 unknown name/3112356f-cc77-4e82-86d53e25ee8192a4 2 728507 a8499e65-a6f6-48b0-96db45c266030d83 1 734755 9e1cc850-6731-4848-87526673c7005eee .... Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia1b7f6b98bafeec0afe843f0f78c99c2f34f50b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-04-02mb/google/skyrim: Fix ESPI communication issuesKarthikeyan Ramasubramanian
* Use dedicated ALERT pin to resolve NO_RESPONSE error/status while getting target configuration. * Configure the ESPI to operate at 16 MHZ since operating at 33 MHz causes boot stall. BUG=b:226635441 TEST=Build and Boot to OS in Skyrim. Ensure that EC <-> AP communication is working fine through Host Command debug logs in EC console, ectool version command. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I951afdada8ee4f917cdeba8e287e5a2ae77c97ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/63286 Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-02herobrine: fix emmc and sd card clocksShelley Chen
Found an issue where emmc and sd clocks were being misconfigured due to using incorrect integer values when called instead of the defined enums. Fixing by splitting the clock_configure_sdcc() function into two (sdcc1 and sdcc2) as there was no commonality between the two cases anyway. As a result, we can also get rid of the clk_sdcc enum. BUG=b:198627043 BRANCH=None TEST=build herobrine image and test in conjunction with CB:63289 make sure assert is not thrown. Change-Id: I68f9167499ede057922135623a4b04202f4da9b5 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-04-01mb/dell/snb_ivb_workstations: Choose correct PCH for OptiPlex 9010Angel Pons
The Dell OptiPlex 9010 uses a Q77 PCH, which is Panther Point. The only difference is the definition of the `CROS_GPIO_DEVICE_NAME` macro, which is not used for non-ChromeOS coreboot builds. Change-Id: I7ad07b464aef24f7749c3fe9300b7f7dd865e47b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-01mb/dell/snb_ivb_workstations: Fix SMBIOS slot desc for PCH PCIe portsAngel Pons
The PCH's PCIe ports do not support Gen3 speeds, only Gen1/Gen2. Change-Id: I7df61af1953ec99000c6c501b017e553190a46b6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-04-01mb/starlabs/labtop: Disable legacy_8254_timer by defaultSean Rhodes
It was enabled due to known compatibility issues with Qubes OS. Since the release of R4.1.0, this issue is no longer present so it can be disabled. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iab6048dc93112b9365f0c2b46225569073eb32f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61861 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-04-01mb/google/guybrush: Remove elog_gsmi_cb_mainboard_log_wake_sourceRob Barnes
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes eSPI transactions. If the SMI interrupts an ongoing eSPI transaction from the OS it will conflict and cause failures. Removing this call to avoid conflicts. This can be re-enabled after refactoring google_chromeec_get_mask to use ACPI MMIO. BUG=b:227163985 BRANCH=gubyrush TEST=No 164 errors detected during suspend_stress_test /sys/firmware/log output after resume before change: SMI# #1 ELOG: Event(B0) added with size 9 at 2022-03-31 19:52:51 UTC GPIO Control Switch: 0xcf000000, Wake Stat 0: 0x00000000, Wake Stat 1: 0x00000000 ELOG: Event(9F) added with size 14 at 2022-03-31 19:52:51 UTC Chrome EC: clear events_b mask to 0x0000000000000000 after change: SMI# #6 ELOG: Event(B0) added with size 9 at 2022-03-31 19:50:19 UTC GPIO Control Switch: 0xcf000000, Wake Stat 0: 0x00000000, Wake Stat 1: 0x00000000 ELOG: Event(9F) added with size 14 at 2022-03-31 19:50:19 UTC Change-Id: I3320e3fb8bd9e9e0db84332e1d147a0af25f7601 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63280 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01mb/starlabs/laptop: Enable rtd3 for SSD on TGLStephen Edworthy
Enabling rtd3 reduces power consumption when the SSD is idle. Tested and verified on the StarBook Mk V (TGL), using PowerTop on Manjaro 21.2.5 GNOME at 20% Brightness. Signed-off-by: Stephen Edworthy <stephen@starlabs.systems> Change-Id: I0d8aa185a322bb8d1aba51ccaab03c521cec2770 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-04-01mb/google/brya/var/nereid: Add separate VBT for HDMIReka Norman
BUG=b:226848617 TEST=HDMI works on nereid Cq-Depend: chrome-internal:4650256 Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I6a90d3d86b32f73ec0130e582539d1c5b045da62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63239 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-04-01mb/google/brya/var/nereid: Disable C1 PMC mux conn for HDMIReka Norman
BUG=b:226848617 TEST=HDMI works on nereid Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I039c30f95d959dba489b24b6938d08da937c5e03 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-04-01soc/intel/common/tcss: Check conn device enabled in tcss_get_port_infoReka Norman
BUG=b:226848617 TEST=With the following change, the nereid C1 PMC mux conn is disabled based on fw_config, allowing HDMI to work. Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: I487f3ca4be4ead0c5dfb46e9eb19de5ae9b9bda9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63237 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01mb/starlabs/labtop: Add CMOS defaults for EC functionsSean Rhodes
Set the CMOS defaults for EC related functions: * Function Lock = Enabled * Trackpad = Enabled * Keyboard Backlight Brightness = Off * Keyboard Backlight State = Enabled Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I528c30893d2af87584a09f23b982b5f36b37a873 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-04-01device/i2c_bus: Constify i2c_busdev and i2c_linkMatt DeVillier
Change-Id: If795087ecdaea24ad7834dcc6d5bf6a72f2aea8f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63208 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-01mb/google/skyrim/var/skyrim: Add ELAN trackpad configKarthikeyan Ramasubramanian
Add support for ELAN trackpad on I2C0 bus. BUG=None TEST=Build and boot to OS in Skyrim. Perform evtest on Elan trackpad. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia1522af3f35ef131dda74c4aabecc4fa532dfbec Reviewed-on: https://review.coreboot.org/c/coreboot/+/63236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-01arch/x86/postcar: Use a separate stack for C executionArthur Heymans
Add a stack in .bss for C execution. This will make it easier to move the setup of MTRRs in C code. Change-Id: I67cbc988051036b1a0519cec9ed614acede31fd7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/54298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-04-01mb/amd/majolica/port_descriptors: clean up variable namesFred Reitberger
Removing unnecessary "czn" in variable name. Majolica is always a cezanne. TEST=Timeless build Change-Id: I490111ecea84c934585d0bbd623486fba76eb7f1 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63261 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01mb/amd/chausie/port_descriptors: clean up variable namesFred Reitberger
Remove "czn" from the variable names since chausie does not use cezanne. TEST=Timeless build Change-Id: I8cc854f4c60707c7fec5cd7fef1c4550883cd45a Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-04-01soc/amd/sabrina/makefile: drop multilevel option in amdfwtool callsFelix Held
Since Sabrina uses the image slot header (ISH) that depends on the AMD A/B recovery scheme that depends on the multi-level PSP directory support, the multi-level support gets automatically selected by passing Sabrina as SoC name to amdfwtool, so passing the --multilevel command line switch to amdfwtool isn't needed. TEST=Timeless build results in identical binary for chausie Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I98154d5b47daca6ae7952ffd3175d98ea3e01845 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63235 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-04-01soc/amd/common/block/i2c/i23c_pad_ctrl: only configure mode and voltageFelix Held
The fch_i23c_pad_init implementation was written without looking at any reference code and turned out to not work properly on hardware. Before this function writes to the MISC_I23C_PAD_CTRL registers, the value read back is 0x3000003c which results in the I2C bus communication to work while the 0x300003fc the code writes to the register breaks the I2C communication. Removing the code that sets bits 6..9 fixes the I2C bus communication. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ie6758b3d13c59b20ce810225fca8a365713b7a2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63234 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/amd/sabrina/i2c: handle all I2C pads as I23C pad typeFelix Held
Contradicting the PPR #57243 version 1.56, the I2C3 pad control register in the MISC ACPIMMIO region is the same new I23C pad type as the corresponding registers for I2C0..2 and not the older I2C pad control register type used on Picasso and Cezanne. All I2C pads being of the new I23C type is in line with the GPIOMUX settings for the pins used by I2C0..3 that can alternatively connect the pins to an I3C controller. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I51b0ddf8ba2ccfee823e3d4d26a77b11825b1029 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63233 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/amd/sabrina/include/gpio: add I3C3 IOMUX definitionsFelix Held
According to PPR #57243 version 1.56, the IOMUX setting 2 of the pins 19 and 20 is the I3C3 controller and not the I2C3 controller. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9688f1816aa840c64441495ed451997a474b306f Reviewed-on: https://review.coreboot.org/c/coreboot/+/63232 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/amd/common/block/i2c/i23c_pad_ctrl: invert and maskFelix Held
When masking out bits with an and mask, the bit mask needs to be inverted. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9739d7150e230fbbe6523413de9c07d7340f3c61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63222 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/amd/common/block/i2c/i23c_pad_def.h: fix off by one in defineFelix Held
I23C_PAD_CTRL_SLEW_N_SHIFT is 6 and not 7 which matches both with the PPR #57243 revision 1.53 and with I23C_PAD_CTRL_SLEW_N_MASK which covers both bits 6 and 7. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I622717bebaffe34b6df5e578b082dc10e2a98256 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63216 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/intel/alderlake: Add HID for DPTF Power ParticipantVarshit B Pandya
BUG=b:205928013 TEST=Build, boot brya0 and dump SSDT to check TPWR device HID Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I82507a3c0a521adbb8dec5520fd6d2ea3782c60e Reviewed-on: https://review.coreboot.org/c/coreboot/+/63202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-01drivers/intel/dptf: Add support for Power participantVarshit B Pandya
As per Intel Dynamic Tuning revision 1.3.13 (Doc no: 541817) Add support for TPWR device under \_SB.DPTF BUG=b:205928013 TEST=Build, boot brya0 and dump SSDT to check TPWR device Device (TPWR) { Name (_HID, "INTC1060") // _HID: Hardware ID Name (_UID, "TPWR") // _UID: Unique ID Name (_STR, "Power Participant") // _STR: Description String Name (PTYP, 0x11) Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I437e509f58df1777d75e5981f0a5a63095ccb6a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62944 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01mb/google/brya/variants/baseboard/brask: Turn off NFC power in S0ixAlan Huang
Turn off the NFC power which is controlled by GPP_D3 to save power in S0ix states. For an USB device, the S0ix hook is needed for the on/off operations to take place. BUG=b:202737385 BRANCH=firmware-brya-14505.B TEST=measure the voltage of GPP_D3 in S0ix states Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I69588c82dfde1744c45c7aff3ac05b80bb16a8f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-04-01arch/x86/Kconfig: Drop obsolete fixed ramstage symbolsArthur Heymans
On x86 ramstage is always relocated at runtime in cbmem so there is no need to have this configurable in Kconfig. Change-Id: I01b2335d0b82bea8f885ee5ca9814351bbf2aa3c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63215 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01mb/google/brya/var/primus{4es}: Decrease touchscreen T3 timing to 200msCasper Chang
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times are greater than 500ms, which is the spec for Chromebooks. The actual kernel timing has been measured, and given the ACPI delay after deasserting reset in addition to the delay until the kernel driver accesses the device, delaying only 200ms in the ACPI method is also sufficient to meet the 300ms requirement. BUG=b:223936777 BRANCH=none TEST=build and test touchscreen function on DUT. TEST=suspend, wake DUT and check touchscreen function. Change-Id: I6b04cf6392d924aed01ca36b720f889b88d92311 Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-04-01mb/google/brya/var/nereid: Enable AUX DC biasing on C0 and C1Reka Norman
C0 has no redriver, so enable SBU muxing in the SoC. C1 has a redriver which does SBU muxing, so disable SBU muxing in the SoC. However, this also disables AUX biasing when the pins are configured as NF6. So instead configure the C1 AUX bias pins as GPO. BUG=b:227259673 TEST=Voltages are correct on the C0 and C1 AUX bias pins Change-Id: Ic0af662ecc1c6cee15b4ae98cb02deeefc93a71e Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2022-04-01drivers/intel/fsp1_1: Reduce scope of functionsArthur Heymans
Reduce scope of get_next_hob and drop unused functions. Change-Id: I81007295ed2d1592c4d829cbb277c0726d89ea4b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63203 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2022-04-01mb/clevo/tgl-u: add new board L14xMUMichael Niewöhner
Add new board Clevo L14xMU (TGL). GPIOs were configured based on schematics. Tested and working: - On-board RAM (M471A1G44AB0-CWE) - DIMM slot (tested Crucial CT16G4SFD8266.16FJ1 / MTA16ATF2G64HZ-2G6J1) - Graphics (GOP driver), including HDMI - Keyboard - I2C touchpad (including interrupt) - TPM (with interrupt on Windows, only polling on Linux [1]) - microSD Card reader - both NVME ports - Speakers - Microphone - Camera - WLAN/BT (CNVi) - All USB2/3 ports including Type-C - Thunderbolt detects my work laptop in TB Control Center (I couldn't test anything more due to security policy.) - TianoCore - internal flashing with flashrom on vendor firmware Note on TPM: The vendor sets Intel PTT to default-on in newer CSME images, which conflicts with the dTPM. Currently, there are two ways to make it work: 1) Boot vendor firmware once to let it disable PTT via CSME firmware feature override. 2) Use Intel Flash Image Tool (FIT) to set "initial power-up state" to disabled. Boots fine: - Debian testing, unstable (Linux 5.16.14, 5.17.0-rc6) - Windows 10 21H2 (Build 19044.1586) Untested: - Thunderbolt (see above) - Type-C DisplayPort - S-ATA Doesn't work: - TPM interrupt on Linux [1] - All EC related functions - EC driver is WIP - WLAN/BT (PCIe) - gets detected but can't be enabled - 3G/LTE (not powered without EC driver) - Fn-Keys - S0ix - UCSI - Fan control - Battery info [1] https://lkml.org/lkml/2021/5/1/103 Change-Id: I4c4bef3827da10241e9b01e12ecc4276e131a620 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-04-01cpu/intel/fit: Clear the FIT table when setting pointerArthur Heymans
When rebuilding coreboot the empty fit table added to added to CBFS stays the same so the build process sees no reason to update the file. In the meantime ifittool did update that file for instance to add microcode update entries. So each time coreboot is rebuilt the entries are appended to the FIT table which runs out of space at some point. One way to deal with this is to clear the fit table when setting the pointer inside the bootblock. TESTED: Now running 'make' again on prodrive/hermes does not report an error with a filled FIT table. Change-Id: Ia20a489dc90a4ae704e9ee6d532766899f83ffcc Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63036 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-04-01soc/qualcomm/common: Increase SPI gpios drive strength to 8mAShelley Chen
EE requested that we increase the drive strength for the SPI lines to 8mA. BUG=b:198627043 BRANCH=None TEST=EE help verify Change-Id: Ic887a7eef74f1063f7284db042c5fbd2e1d5bd4c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-31util/cbmem: Add FlameGraph-compatible timestamps outputJakub Czapiga
Flame graphs are used to visualize hierarchical data, like call stacks. Timestamps collected by coreboot can be processed to resemble profiler-like output, and thus can be feed to flame graph generation tools. Generating flame graph using https://github.com/brendangregg/FlameGraph: cbmem -S > trace.txt FlameGraph/flamegraph.pl --flamechart trace.txt > output.svg TEST=Run on coreboot-enabled device and extract timestamps using -t/-T/-S options Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I3a4e20a267e9e0fbc6b3a4d6a2409b32ce8fca33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-31mb/google/brya/var/agah: Replace amp max98390 with max98360Tony Huang
Based on the latest schematic, agah will replace the Maxim 98390 speaker amps with Maxim max98360. This patch updates the devicetree entries to reflect that. BUG=b:210970640 BRANCH=brya TEST=emerge-draco coreboot Change-Id: I7ea36d276f7ffeae1510483027092e2bc59690fc Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-31mb/google/brya/var/agah: Add GL9750 SD card reader supportTony Huang
BUG=b:210970640 TEST=emerge-draco coreboot Change-Id: I881c2c1ad7b0d10b7ae38fcd9814f757cf56feb5 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-31mb/google/brya/var/kinox: set GPP_D0 to NCDtrain Hsu
Brask set GPP_D0 to GPO in commit b0769db4, but Kinox doesn't support fingerprint. This patch sets GPP_D0 to NC for matching schematic. BUG=b:214025396 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I38b9eb2df83cfbdb58d95cb178c1d767299aa4da Reviewed-on: https://review.coreboot.org/c/coreboot/+/63195 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-03-31soc/intel/common: Add Kconfig SOC_INTEL_CSE_SET_EOPJohn
The do_send_end_of_post function is implemented in the cse_eop.c file. This change adds the Kconfig SOC_INTEL_CSE_SET_EOP in cse.c to avoid build issue. Change-Id: Ib52404d9ad4c01a460e4cfef331c529d2a53337a Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2022-03-31drivers/intel/fsp1_1: Fix code not working with strict-aliasing rulesPatrick Rudolph
Change-Id: Ifc95a093cf86c834d63825bf76312ed21ec68215 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-31vendorcode/intel: Remove UDK2015 headersPatrick Rudolph
The headers are now unused, drop them. Change-Id: Ibfaa3029ddc614935481ce736c9d971bf4831b5d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-31Kconfig: Select UDK2017Patrick Rudolph
On platforms using UDK2015 select UDK2017 instead. This allows to drop UDK2015 headers. Tested using timeless builds: The produced binaries are identical. Change-Id: Ia6032c6520ec889cd63655db982d9bfa476dc24d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-31soc/intel/denverton_ns: Resolve macro conflicts with UDK2017 headersPatrick Rudolph
Replace LShiftU64 and RShiftU64 as the defined macro conflicts with UDK2017 headers. Tested using timeless builds: The produced binaries are identical. Change-Id: I8f205f663be9c9c31cf384ca89370afa48ca1e15 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/62985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-31soc/mediatek/early_init: Fix function return typeJianjun Wang
Fix return type of early_init_get_elapsed_time_us() to comply with the data type of return value. Also replace memset() with struct initializer. Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Fixes: commit 41faa22 (soc/mediatek: Add early_init for passing data across stages) Change-Id: I7c361828362c2dfec91358ad8a420f5360243da0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63190 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-30mb/google/brya/var/kano: Remove SAR sensorDavid Wu
RF team comfirmed that SAR sensor is not necessary for MP, therefore remove the corresponding entries from the devicetree. BUG=b:202978964 TEST=Build pass. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I31faf18563848f8d6787fe70bfb28006efea8427 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30mb/google/brya/variants/crota: Add memory config for crotaTerry Chen
Fill in the memory config based on the the schematic by bernadino 14 adl-p 20220112.pdf BUG=b:219891328 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I981d2cd6feafee8c10ec9724a3dec9a23ba0ddd7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30Revert "mb/google/brya/var/kano: adjust I2C3 speed"David Wu
This reverts commit 65aaccda5910e9c74aaa2a44ea84119d9476c902. Reason: 1. Fix firmware messages show [ERROR] dw_i2c:invalid bus speed 390000 2. Measure DVT I2C3 speed < 400KHz. BUG=b:215095284 TEST=There isn't ERROR messages and verify I2C3 speed < 400KHz. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I5982c82a55710824692b41e263418e4b4d420b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30soc/intel/alderlake: Log CSE RO write protection info for ADLSridhar Siricilla
The patch logs CSE RO's write protection information for Alder Lake platform. As part of write protection information, coreboot logs status on CSE RO write protection and range. Also, logs error message if EOM is disabled, and write protection for CSE RO is not enabled. TEST=Verify the write protection details on Gimble. Excerpt from Gimble coreboot log: [DEBUG] ME: WP for RO is enabled : YES [DEBUG] ME: RO write protection scope - Start=0x1000, End=0x15AFFF Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I766d5358bb7dd495b4a9b22a2f1b41dc90f3d8d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30soc/amd/sabrina/makefile: use Sabrina as SoC name in amdfwtool callFelix Held
Now that the amdfwtool support for Sabrina is in place, change the SoC name parameter passed to amdfwtool from Cezanne to Sabrina. The fw.cfg file still points to the Cezanne binaries, but since commit 9cb0a05dfb308323a5b3df1a25fa66b35ecfcdd6 (soc/amd/sabrina: Add prompt for AMDFW_CONFIG_FILE) this can be overridden via the Kconfig config file in the build. As soon as the Sabrina PSP binaries are available in 3rparty/amd_blobs, the fw.cfg file will be updated to use the correct ones for Sabrina. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53a8de222e39bd2b92c07661b6c52a02fb651609 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63189 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30soc/amd/sabrina/makefile: drop PSP_S0I3_RESUME_VERSTAGE handlingFelix Held
The PSP_S0I3_RESUME_VERSTAGE Kconfig symbol is only defined in the Cezanne Kconfig, so drop this from the Sabrina makefile. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I9571a302d427981cdf750a1cb3b7f4db9d61a87c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63188 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30mb/google/skyrim: Call espi_switch_to_spi1_padsRaul E Rangel
We are using the second SPI pads for eSPI. BUG=b:226635441 TEST=Build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I43713d7376a28ced2be635668836464ceec46392 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63096 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30soc/amd/sabrina: Add espi_switch_to_spi1_padsRaul E Rangel
The way to select the pads has changed from Cezanne. BUG=b:226635441 TEST=Build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I96baf6b9c169ed61d221352b29ac676bca40da21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63095 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30ChromeoS: Retain ACPI CNVS contents on S3 resumeKyösti Mälkki
For platforms without EC_GOOGLE_CHROMEEC S3 resume path always reported ACTIVE_ECFW_RO because acpi_fill_cnvs() and mainboard_chromeos_acpi_generate() were not called. Change-Id: Iea71a51aba7ab1b6966389c17a1e06ccc96ae0e9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30mb/google/guybrush/var/dewatt: add specific SPD hex for dewattChris.Wang
Add the specific SPD hex file for the Samsung memory part with updating the part number into the SPD table. The ABL needs to identify the part by checking SPD data to do the proper tuning. BUG=b:224884904 TEST=Build, validate the SPD data has been applied. Signed-off-by: Chris.Wang <chris.wang@amd.corp-partner.google.com> Change-Id: Ia54726ce8c1bae46dcd4fed3df509ef184914e94 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-03-30commonlib/timestamp_serialized: Add timestamp enum to name mappingJakub Czapiga
Some solutions require readable form of timestamps, which does not contain spaces. Current descriptive timestamp names do not meet this criteria. Also, mapping enums to their text representation allows for quick grepping (use of grep command) to find relevant timestamps in the code. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Ifd49f20d6b00a5bbd21804cea3a50b8cef074cd1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-30commonlib/bsd/helpers: Remove redundancy with libpayload definesJakub Czapiga
Move STRINGIFY() from coreboot string.h to commonlib/bsd/helpers.h Remove redundant defines from libpayload.h and libpayloads' standard headers. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: I3263b2aa7657759207bf6ffda750d839e741f99c Reviewed-on: https://review.coreboot.org/c/coreboot/+/62921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-30mb/google/brya/variants/crota: init overridetree for crotaTerry Chen
init overridetree.cb based on the schematic bernadino 14 adl-p 20220112.pdf BUG=b:226315394 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ibca9d93a81469730e472a645c607a97a624e9a1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30mb/google/brya/var/banshee: Update the GPP_D12 as USB_C3_LSX_RXFrank Wu
Update the GPP_D12 according to USB_C3_LSX_RX. BUG=b:225081954 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage The device can be recognized when it is attached in port3. localhost /sys/bus/thunderbolt/devices # ls 0-0 1-0 1-0:3.1 1-3 domain0 domain1 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I38caa76c855e683eb0587eb67ee9abc91af4545d Reviewed-on: https://review.coreboot.org/c/coreboot/+/63174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-30mb/google/cherry: Add PCIe domain support for dojoJianjun Wang
Add override device tree for dojo and add PCIe domain support. Reference: - MT8195 Register Map V0.3-2, Chapter 3.18 PCIe controller (Page 1250) TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ifb02960504177fe488e6784b954c16b2c8d94972 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-30mb/google/brya/var/taeko: Add new FW_CONFIG option for THERMAL for tarloJoey Peng
Add thermal table settings for tarlo which shares the same firmware with taeko BUG=b:215033683 TEST=emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I37f79cde502115bbf65bb97216eddb6ea22b1648 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-03-30mb/google/guybrush: Disable EN_SPKR on initYu-Hsuan Hsu
We don't want to enable the speaker on init. It will be enabled while using GPIO AMP codec in depthcharge. BUG=b:223289882 TEST=boot guybrush and verify the devbeep and gpio value in kernel Change-Id: Ic949cc95556913a2afef4a683a49eaa1e07e6147 Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-03-30mb/starlabs/lite: Move Verb Table to variant directorySean Rhodes
Move the verb table to variant directory to allow for different tables for different variants. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I4260188057d1c3b4e6ea7c82f085fad0cc244881 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30ec/starlabs/merlin: Add GLKR variantSean Rhodes
Add GLKR (N5030) Lite Mk IV variant Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1e17130caa16a605d0d3207d41527df3db6ada81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62705 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30ec/starlabs/merlin: Add support for Nuvoton EC'sSean Rhodes
Support was created for the NPCE9m5x series, using version 1.1 of the datasheet. The specific model tested was the NPCE985P/G, on the StarLite Mk IV with version 1.00 of the EC firmware. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib66baf1e88f5d548ce955dffa00c9b88255b2f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62702 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-30ec/starlabs/merlin: Make EC function names genericSean Rhodes
Rather than using `ite_`, use `ec_` so the same functions can be called for different ECs. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie61af233f731eb47772af1c82c6abdc515bc89cc Reviewed-on: https://review.coreboot.org/c/coreboot/+/62700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30ec/starlabs/merlin: Rename ec.c to more specific ite.cSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0bac5e4c101792dd4c6a0d4a1ae4a4c7fcd837d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30drivers/tpm: Force enable long IRQ pulses for Ti50 versions under 0.15.Reka Norman
Only Cr50 versions starting at 0.5.5 support long IRQ pulses, so this feature is enabled based on the value of the board_cfg register (see CB:61722). However, Ti50 versions below 0.0.15 don't support the board_cfg register, and trying to access it will cause I2C errors (see CB:63011). Also, all Ti50 versions only support long IRQ pulses. Therefore, add a workaround to force enable long IRQ pulses for boards using Ti50 versions under 0.0.15, instead of enabling it based on board_cfg. This workaround will be removed once all Ti50 stocks are updated to 0.0.15 or higher. BUG=b:225941781 TEST=Boot nivviks and nereid to OS with Ti50 0.0.14 and check there are none of these I2C errors: [ERROR] I2C stop bit not received [ERROR] cr50_i2c_read: Address write failed [ERROR] cr50_i2c_tis_status: Failed to read status Change-Id: Iaba71461d8ec79e8d6efddbd505339cdf1176485 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63160 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30mb/google/nissa/var/nivviks: Move WWAN power on sequence forwardEric Lai
Move WWAN power on sequence from OS to coreboot. This can save the WWAN initial time about 10S. Another purpose is power resource be removed because we don't power off the LTE in S0ix. BUG=b:223490884 TEST=FM101-GL work as expected. Enumerate time from [ 17.747145] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 17.760192] usb 4-2: New USB device found, idVendor=2cb7, idProduct=01a2, bcdDevice= 5.04 [ 17.760210] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 17.760215] usb 4-2: Product: Fibocom FM101-GL Module [ 17.760220] usb 4-2: Manufacturer: Fibocom Wireless Inc. [ 17.760224] usb 4-2: SerialNumber: 9c88998f to [ 3.936409] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd [ 3.966695] usb 4-2: New USB device found, idVendor=2cb7, idProduct=01a2, bcdDevice= 5.04 [ 3.989989] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.003813] usb 4-2: Product: Fibocom FM101-GL Module [ 4.019760] usb 4-2: Manufacturer: Fibocom Wireless Inc. [ 4.019762] usb 4-2: SerialNumber: 9c88998f Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I0f3fe999ae3a109b739629948b619a389a9059b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2022-03-30mb/intel/adlrvp: Deselect ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTORSridhar Siricilla
The patch deselects ALDERLAKE_A0_CONFIGURE_PMC_DESCRIPTOR Kconfig for ADL RVP board. The flag updates PMC settings in the IFD for Alder Lake A0 silicon. As Alder Lake A0 is intermediate stepping, and the IFD is locked in the production systems, so the Kconfig is deselected. TEST=Build the coreboot for adlrvp Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I966be42ba662861f4a6933d7275ecc13860220f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-30mb/amd/chausie/port_descriptors: update DDI descriptorsFelix Held
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I31db6c138a21dc22e7aa473f2215ca2c7594326c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63163 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30mb/amd/chausie/devicetree: update PCI root portsFelix Held
Only enable the PCIe root ports that have corresponding DXIO descriptors and also update the comments to have them match the actual hardware configuration. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I378c620abb6e52de680669b6edd228874153e399 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63162 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30mb/amd/chausie/port_descriptors: update DXIO descriptorsFelix Held
Change the DXIO descriptors to match the default PCIe lane mapping on the chausie board. With this configuration and a board-level rework to bypass the EC control of the NVMe SSD power supply rail, this configuration results in the SSD being detected on the root port on bus 0 device 2 function 3 and usable as boot device. This was also validated against the schematics revision B. Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib74988b741f748d240ef09fa0dba8885bdc5e706 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63161 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30mb/google/brask/variants/moli: update GPIOs for moliRaihow Shi
Follow the Moli GPIO Table_20220324.xlsx to update it. 1.Set A15 as the default value. 2.Set A14, A19 NC. 3.Set C3, C4 as the default value. 4.Set D9 as the default value. 5.Set E5, E13 as the default value. 6.Set R4, R5 as the default value. 7.Update E14. 8.Set E12 as the default value. 9.Set D16 as the default value. BUG=b:220821454 TEST=emerge-brask coreboot. Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ia54256244111a99cb130b74f78c37815099a021a Reviewed-on: https://review.coreboot.org/c/coreboot/+/62802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-30mb/google/brya/var/agah: Fix GPU GPIOsTim Wawrzynczak
While adding this train of patches to program the dGPU power sequences, I noticed some of the GPU GPIOs are incorrectly programmed in ramstage, so this patch fixes the settings. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I622b1f5cfba84727bb31792358ca4162c7fa9f52 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-03-30mb/google/guybrush/var/dewatt: Update telemetry valueKenneth Chan
AMD SDLE testing had been done and apply the following telemetry settings for dewatt EVT: vdd scale: 91288 vdd offset: 279 soc scale: 29785 soc offset: 461 BUG=b:219626910 TEST=1. emerge-guybrush coreboot 2. pass AMD SDLE test Change-Id: I4456ffddbf9963f1202a349abe52df2bbb726468 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63136 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-30device/pci_device.c: Return if the scan parameter is invalidArthur Heymans
Clang is unhappy about codepath of an invalid parameter because variables remain unset. Change-Id: I1ba392a48cf3f81a29d9645e5cf220b122d588af Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/63038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-03-30src/console/Kconfig: Add option to disable loglevel prefixIgor Bagnucki
This patch adds an option to disable loglevel prefixes. This patch helps to achieve clear messages when low loglevel is used and very few messages are displayed on a terminal. This option also allows to maintain compatibility with log readers and continuous integration systems that depend on fixed log content. If the code contains: printk(BIOS_DEBUG, "This is a debug message!\n") it will show as: [DEBUG] This is a debug message! but if the Kconfig contains: CONFIG_CONSOLE_USE_LOGLEVEL_PREFIX=n the same message will show up as This is a debug message! Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com> Change-Id: I911bb601cf1933a4c6498b2ae1e4cb4d4bc85621 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-03-29mb/google/skyrim: Disable PSP postcodesKarthikeyan Ramasubramanian
ESPI is not initialized in PSP. Hence any attempt to write to port80 causes failure to boot. Disable PSP postcodes for now and re-enable it later after ESPI is initialized in PSP. BUG=b:224618411 TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I73b7ddec50936f7836f915f459ca0bdc0777cb22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-29soc/amd/sabrina: Do not clear Port80 enable bit in ESPI DecodeKarthikeyan Ramasubramanian
This is done to work around a hang when SMU writes to port80. Remove it after the issue is fixed. BUG=b:224618411 TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ic152c295954d33ef1acddb3b06f0c6bbfbfb38ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/63122 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/mediatek: Ensure PERST# deassertion time follows the specJianjun Wang
According to the PCIe CEM specification, the deassertion of PERST# should occur at least 100ms after the assertion. To ensure the 100ms delay requirement is met, calculate the elapsed time since assertion. If it is smaller than 100ms, do an extra delay. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the measured PERST# time: [DEBUG] mtk_pcie_domain_enable: 432517 us elapsed since assert PERST# [INFO ] mtk_pcie_domain_enable: PCIe link up success (17 tries) And the SSD information in boot log is as follows: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Ie2b7b6174abdf951af5796ab5ed141c45f32fc71 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29mb/google/cherry: Pre-initialize PCIe at the bootblock stageJianjun Wang
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should be delayed 100ms (TPVPERL) for the power and clock to become stable. Instead of asserting PERST# right before PCIe initialization and waiting for 100ms, which is currently the only function of 'mtk_pcie_pre_init', so that the extra 100ms delay in ramstage is avoided. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: Id5b9369e6f8599f93415588ea585c952a41c5e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/62359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8195: Add early init supportJianjun Wang
Add early init support for MT8195 platform. TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I4eb7da53ff76c385cab18bbf84970e96b61662ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/63020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek: Add early_init for passing data across stagesJianjun Wang
Add support for "early_init_data" region, which can be used to store data initialized in an early stage (such as bootblock), and retrieve it in later stages (such as ramstage). TEST=Build pass and boot up to kernel successfully via SSD on Dojo board, here is the SSD information in boot log: == NVME IDENTIFY CONTROLLER DATA == PCI VID : 0x15b7 PCI SSVID : 0x15b7 SN : 21517J440114 MN : WDC PC SN530 SDBPTPZ-256G-1006 RAB : 0x4 AERL : 0x7 SQES : 0x66 CQES : 0x44 NN : 0x1 Identified NVMe model WDC PC SN530 SDBPTPZ-256G-1006 BUG=b:178565024 BRANCH=cherry Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com> Change-Id: I01f91b7fe2cbe4f73b5c616bb7aae778dee27d9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/amd/common/block/lpc: Add support to not clear port80 enableKarthikeyan Ramasubramanian
SMU locks up sometimes if the port80 enable bit is cleared in the ESPI Decode register. Add a config to choose between clearing the entire ESPI Decode Register vs retaining the port80 enable bit. BUG=None TEST=Build and boot to OS in Skyrim. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: Ia5ee012ac4858d6dd43827274169edf622a70489 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-03-29mb/google/brya/var/felwinter: Update GPP_E19 from NF to NCJohn Su
Configure GPIO according to b:224107199 comment#15. - GPP_E19 from NF to NC. BUG=b:224107199 TEST=emerge-brya coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: I06d02c5a8b6cf65d5643eaf30fb277c3321dac8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/63116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-03-29soc/mediatek/mt8186: Enable USE_CBMEM_DRAM_INFORex-BC Chen
The feature "USE_CBMEM_DRAM_INFO" is supported in MT8186. Therefore, we select this configuration to enable it. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ieaaf57aaee79c9dce69cc1acaa092207f0f906de Reviewed-on: https://review.coreboot.org/c/coreboot/+/63114 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/mediatek: Add a configurate "USE_CBMEM_DRAM_INFO"Rex-BC Chen
The memory initialization reference code didn't support returning DRAM information in the old platforms, for example MT8192 and MT8195. So we have to add a new configuration USE_CBMEM_DRAM_INFO to make sure the common code will try to get DRAM information on new platforms supporting that. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iebe9ea0c1d01890b09fdf586813d85adde9702e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-03-29soc/mediatek/mt8186: Fix pmif setting for low power modeZhiyong Tao
The current pmif register setting for low power mode is incorrect, which is causing suspend failure. The issue of suspend failure is that SRCLKENA0 will not be pulled down. EC will not be informed AP is suspending now becuase of this. Therefore, add pmif_spmi_set_lp_mode() to correct the setting. This implementation is based on chapter 3.7 in MT8186 Functional Specification. BUG=b:215639203 TEST=test of suspend and resume pass. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Change-Id: I2d02198f19f9cb052fba612c02404a6af1a10adb Reviewed-on: https://review.coreboot.org/c/coreboot/+/63089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-29mb/google/cherry: support max98390 audio ampTrevor Wu
The Cherry follower projects may choose Max98390 for audio output so we have to add a new config CHERRY_USE_MAX98390. Also, the 'dojo' device is the first one to use it. BUG=b:204391159 BRANCH=cherry TEST=emerge-cherry coreboot TEST=Verify beep function through CLI in depthcharge successfully Signed-off-by: Trevor Wu <trevor.wu@mediatek.com> Change-Id: I9b6bc5a5520292dd502b0389217f5062479b4490 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63083 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-29soc/intel: Move `pmc_clear_pmcon_sts()` into IA common codeSubrata Banik
This patch moves `pmc_clear_pmcon_sts` function into common code and remove SoC specific instances. Accessing PMC GEN_PMCON_A register differs between different Intel chipsets. Typically, there are two possible ways to perform GEN_PMCON_A register programming (like `pmc_clear_pmcon_sts()`) as: 1. Using PCI configuration space when GEN_PMCON_A is a PCI configuration register. 2. Using MMIO access when GEN_PMCON_A is a memory mapped register. SoC users to select `SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION` Kconfig to perform GEN_PMCON_A register programming using PMC MMIO. BUG=b:211954778 TEST=Able to build brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I8d15f421c128630f928a1b6a7e2840056d68d7b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-03-29src/mainboard/starlabs: Remove unused <option.h>Elyes Haouas
Found using: diff <(git grep -l '#include <option.h>' -- src/) <(git grep -l 'sanitize_cmos(\|get_uint_option(\|set_uint_option(\|get_uint_option(\|set_uint_option' -- src/) |grep "<" Change-Id: Ib79dfa73b8a30ae1b1e432318bd42e4e3d845af3 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60751 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2022-03-28soc/amd/sabrina/Kconfig: update SOC_AMD_COMMON_BLOCK_UCODE_SIZEFelix Held
The Sabrina microcode update files are 3200 bytes large and not 5568 like it is the case on Cezanne where this file was originally copied from. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I12209d523096781195ba8957ec797d8c80eecbe5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63127 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-03-28mb/google/skyrim: Implement mb_set_up_early_espiRaul E Rangel
This will setup the eSPI GPIOs in bootblock right before eSPI init. BUG=b:226635441 TEST=build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I6ff32bf840aa4b757e98d876cbd4e2ba15a760da Reviewed-on: https://review.coreboot.org/c/coreboot/+/63094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-28mb/google/skyrim: Swap eSPI_CS_L and SOC_DISABLE_DISP_BLRaul E Rangel
The eSPI CS function only exists on AGPIO30. We will need to rework all boards to make eSPI function. I also fixed the comments on the other eSPI pins. BUG=b:226635441 TEST=Build skyrim Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib03c0a7dcad31d10dd4bad0d10a0184ab84aef9a Reviewed-on: https://review.coreboot.org/c/coreboot/+/63093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-03-28nb/intel/sandybridge/acpi: Support setting PCI bars above 4GArthur Heymans
Although coreboot can allocate resources above 4G, Linux does not consider those allocation valid when there is no region above 4G in _CRS and disables the device. TESTED: x220 with and external GPU via the expresscard slot. Linux does not touch the BARs allocated above 4G. Change-Id: If1be9a2c1e03e5465fd3b164469511eca60edc5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2022-03-28include/spd.h: Fix DDR4_SPD_72B_SO_{R,U}DIMM valuesElyes Haouas
Regarding JEDEC Standard No. 21-C, Release 30, page 13, DDR4_SPD_72B_SO_RDIMM and DDR4_SPD_72B_SO_UDIMM values are respectively 0x08 and 0x09. There is no affected board in coreboot tree. Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Change-Id: Id4e9c3814e2e7f379917bf93f7975af3aad31dbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/62647 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-03-28soc/intel/alderlake: Enable FSP_USES_CB_DEBUG_EVENT_HANDLER KconfigSubrata Banik
This patch uses the FSP event handler feature and updates with coreboot native debug implementation to unify the debug library between coreboot and FSP. BUG=b:225544587 TEST=Able to build and boot Brya with the same FSP debug log before and with this code changes. Before: Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3 Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A The 0th FV start address is 0x000F961B000, size is 0x00150000, handle is 0xF961B000 Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39 Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38 Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6 With this code change: [SPEW ] Register PPI Notify: DCD0BE23-9586-40F4-B643-06522CED4EDE [SPEW ] Install PPI: 8C8CE578-8A3D-4F1C-9935-896185C32DD3 [SPEW ] Install PPI: 5473C07A-3DCB-4DCA-BD6F-1E9689E7349A [SPEW ] The 0th FV start address is 0x000F95C0000, size is 0x00160000, handle is 0xF95C0000 [SPEW ] Register PPI Notify: 49EDB1C1-BF21-4761-BB12-EB0031AABB39 [SPEW ] Register PPI Notify: EA7CA24B-DED5-4DAD-A389-BF827E8F9B38 [SPEW ] Install PPI: B9E0ABFE-5979-4914-977F-6DEE78C278A6 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I4a0530a282657e379a00c3e7d0ed8148dd5e9196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-28soc/intel/alderlake: Use coreboot native event handler for FSP-M/SSubrata Banik
This patch assigns FSP handler event for FSP-M and FSP-S with coreboot romstage and ramstage debug handler when FSP_USES_CB_DEBUG_EVENT_HANDLER Kconfig is enabled. BUG=b:225544587 TEST=Able to build and boot brya. Also, verified the FSP debug log is exactly same before and with this code change. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I665def977faaae45f6f834d75e8456859093ba49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63008 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-03-28device/pciexp_device: Set resources for pciexp_hotplug_dummy_opsJohn Su
Without setting the set_resources field for pciexp_hotplug_dummy_ops, we will get an error during pciexp_hotplug_dummy. [ERROR] NONE missing set_resources Because the set_resources field is considered mandatory, explicitly set it as no-op noop_set_resources. BUG=b:220639445 TEST=emerge-brya coreboot Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Change-Id: Ifee7479c69cf16025dbd4e3924056ed7f8e253cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/63101 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-03-27mb/google/skyrim: Add DXIO descriptorsJon Murphy
Add Skyrim DXIO descriptors using info from AMD and skyrim bouard shematics. BUG=b:225179599 TEST=Boots to OS on Skyrim Board Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Ib68cf3d64641b006e0f2c4805af22b44a505a0d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/62903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 08:51:40 +0000