| Age | Commit message (Collapse) | Author |
|---|
|
This change also makes sure that the sum the uma regions (TSEG, GSM,
GSM) is 4MiB aligned. This is needed to avoid cbmem_top floating between
2 usable ram region, since cbmem_top is aligned 4MiB down to easy MTRR
setup for ramstage. At least tianocore requires this and fails to boot
without it.
Better MTRR are achieved by making the memory 'hole' till 4GiB exactly
2Gib.
This code mimics how it is done in nb/intel/gm45 and achieves similar
results.
TSEG is enabled and set to 8M since this makes it easier to reuse the
common smm setup / parallel mp code and makes it possible to cache the
ramstage in there like how it's done on newer targets.
TESTED on Intel DG43GT.
Change-Id: I1b5ea04d9b7d5494a30aa7156d8c17170e77b8ad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Programming CxDRB should be cumulative as explained in "Intel ® 4
Series Chipset Family datasheet".
This does not seem to have any real impact but better do according to
the documentation and what vendor firmware does.
This also removes some dead code.
Change-Id: I7ff3264824c843f84b9eb6c06a06aa3f151fe4b3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22911
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This training find the optimal write DQ delay and read DQS delay
settings. It does so on all lanes at the same time, like
vendor (training each lane individually has poor results).
The results are stored in the sysinfo struct and restored on next
boots and S3 resume.
This potentially increases stability as optimal settings are chosen
and is more necessary for DDR3 raminit where the write DQS delays are
leveled/variable due to the flyby topology.
TESTED on Intel DG43GT with (2G + 1G) on each channel, see that the
results are quite close to the safe original ones (that previous
worked fine) and tested with memtest86+.
Change-Id: Iacdc63b91b4705d1a80437314bfe55385ea5b6c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I78b43cbc052e6d243d67ca8cdd86b242e477a2c7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23532
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove locking of PCI device 00:00.0 registers (nehalem/finalize.c)
and remove setting the zeroth bit of the MSR_LT_LOCK_MEMORY = 0x2e7 MSR
register (model_2065x/finalize.c) to fix a frozen boot and S3 resume issue
which became apparent with commit d533b16669a3bacb19b2824e6b4bc76a2a18c92a.
More detailed, either setting the LSB of the 32 bit register at 0x98
of the PCI device 00:00.0 (in the intel_nehalem_finalize_smm function) or
setting the LSB of the the MSR register MSR_LT_LOCK_MEMORY = 0x2e7 (in the
intel_model_2065x_finalize_smm function) indepentenly causes a freeze
during bootup or a complete session loss on resuming from S3 as described
here: https://mail.coreboot.org/pipermail/coreboot/2018-April/086564.html
It seems like Nehalem CPUs do not have a MSR_LT_LOCK_MEMORY register.
Additionally, the "Intel Core i7-600, i5-500, i5-400 and i3-300 Mobile
Processor Series, Datasheet Volume Two" indicates that registers of the
PCI device 00:00.0 cannot be locked manually. Instead, they can only be
locked by TXT, VT-d, CMD.LOCK.MEMCONFIG, ME_SM_LOCK or D_LCK.
Finally, the addresses and sizes of these registers were partially wrong.
Tested on Lenovo X201i with a Core i3 330M (no AES-NI, no VT-d and no TXT
support compared to the Core i5 and Core i7 processors of a X201).
Change-Id: I9d568d5c05807ebf7e131b3e5be8e5445476d61b
Signed-off-by: Matthias Gazzari <mail@qtux.eu>
Reviewed-on: https://review.coreboot.org/25914
Reviewed-by: Nicola Corna <nicola@corna.info>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the thermal event handler method TEVT is defined as an extern,
then defined again in platforms with thermal event handling. In newer
versions of IASL, this generates an error, as the method is defined in
two places. Simply removing the extern causes the call to it to fail on
platforms where it isn't actually defined, so add a preprocessor define
where it's implemented, and only call the method on those platforms.
Change-Id: I64dcd2918d14f75ad3c356b321250bfa9d92c8a5
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/25916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BRANCH=none
BUG=b:74436746
TEST=Able to include EFI_MP_SERVICES_PPI without any error.
Change-Id: I5add8e533dfd3f6d03abf7b2ca1a83f81f1c5920
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/25628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Id1bc0c88aeecc3f1d12964346326e5b087a2985e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25880
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce bootmem custom memory tags and use them instead of reusing
LB_MEM tags.
Use asserts in bootmem_add_range to verify parameters.
Tested with uImage payload on Cavium SoC.
Change-Id: I7be8fa792fc7933ca218ecd43d250d3a9c55caa6
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
* Adapt to coreboot coding style.
* Use coreboot's endian conversion functions.
* Fix header and header guards.
* Get rid of unused functions.
* Add Kconfig to build it on ramstage.
* Replace size32 with ALIGN_UP and DIV_ROUND_UP.
* Add NULL pointer checks
* Convert constants to defines
Required for Cavium's BDK and uImage FIT support.
Change-Id: I6e6cd9f78fb402bd54d684097326d26eb78d552a
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25523
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Import from https://chromium.googlesource.com/chromiumos/platform/depthcharge
Required for general devicetree patching and FIT support.
Coding style and coreboot integration will be done in a separate commit.
Change-Id: Ida75d4786eae38d84bfc71bf53573dafca8eda40
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Besides the FSP codepath, Sandy Bridge has two codepaths, one native
and one in the form of a binary. This allows the use of the binary.
This can be useful to find flaws in the native raminit.
The native raminit is still selected by default.
Change-Id: I2d71fb7bc5f7b0976157be146c0e4c39a3ed5602
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/23489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
After commit 2188f57a (src/device: Update LTR configuration scheme)
coreboot will hang when reading resources on the ASMedia SATA
controller, although there is already an ASPM config override. So use
the ASPM blacklist driver instead of setting the ASPM override in the
devicetree.
Change-Id: I807d9bd4deef8c1528dff96c7646240ef75e1953
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/25819
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: I0b969a5109276d108e6140bad338c74786b967f3
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: I17675b004023453f137abd387cfacd308d9b98b5
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: I4b930a191130941c8349861cdd803a5be4219274
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23653
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: I4c8acebb4a957a9600de15ea844f620a8909977b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: Ibd01659f518b7a2b1aaf334fe5b16cfb936b68b7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: Icec2e5f722c1f15493e5861b47f64698250f5813
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: I585aa48b99f4ef63905cab5d6d1502bfed0e6e42
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: Idcb8ff4081f2c45427aabb455a70fae1b46bcfc4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: Ib3e708a7fa9f0a78dc704a502a2f01ee0fe209ae
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t`has been abandoned in ramstage.
Change-Id: I2cc938958097e416b85f6592cb8a4e645a3746ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use of `device_t` has been abandoned in ramstage.
Change-Id: If064a4027265e8fc2ea919d9742a554abf29b8db
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
CONFIG_ALT_CBFS_LOAD_PAYLOAD has long since been removed.
Clean up the remnants in braswell.
Change-Id: I88483a4c3a74ed0c7defacf872b1564c3ce7f909
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This configures GPP_A23 as a wake source for the trackpad. We also
need to set up GPP_A GPE0_DW0, thus evicting GPP_B. We don't have any
interesting signals in GPP_B, so we won't be missing it.
I don't have hardware with A23 wired up, so i just tested the wake
source using A19 which is essentially identical to A23.
BUG=b:78541883
TEST=verified we can trackpad can wake system from suspend
Change-Id: If800464c8b2319d758b1823850571919f85bdc6c
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/25850
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Function gpio_output() is only setting the pin as an output, when in fact
it should also set the state (high/low) of the pin. Fix the procedure to
set the state of the pin.
BUG=b:78328773
TEST=None
Change-Id: I516192a0782a9bbb40124029f264a2711114c800
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Currently, google_chromeec_pd_get_amode infinitely loops if a TCPC port
is connected to a device with alternate mode(s) and the call is made
for the mode with the index higher than 0 (e.g. Zinger).
Cros EC manages alternative modes entered in an array (amode[]). The
command is designed to accept a query for an particular index and a
particular SVID.
Zinger has a 'Google' mode. It's stored in amode[0]. When AP queries
first time for DisplayPort with index=0, EC says 'no' as expected.
AP sends the next query with index=1 but EC_CMD_PROTO_VERSION (0x00)
is sent instead because cmd_code is cleared by google_chromeec_command.
res.svid is supposed to be 0 when EC hits the last index + 1 but
res.svid is set to 2 by the EC_CMD_PROTO_VERSION handler because
EC_PROTO_VERSION is currently 2. So, the call succeeds and AP goes to
the next index and this repeats forever.
Any USB-C device with non-DisplayPort alternate mode can cause this
hang unless HDMI port is used.
This patch resets all the fields of chromeec_command in each iteration
in case google_chromeec_command changes them.
BUG=b:78630899
BRANCH=none
TEST=Verify Fizz boots without monitors on Zinger. Verify the svid
enumeration happens as expected.
Change-Id: I388ed4bdfac9176d8e690c429e99674ed267004f
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/25878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All ARM architecture boards are supposed to have a TTB region for their
page tables. ARM systems cannot use the data cache without enabling
paging, so it is imperative to do that as soon as possible. They will
also fault on unaligned accesses when not using the cache, which breaks
assumptions in CBFS code.
Unfortunately, we have some old boards in various stages of disrepair in
the tree that don't always follow these sorts of standard conventions.
It's not clear whether they actually boot anymore and if anyone still
has the respective hardware available to maintain them. I cannot really
fix and test them right now, but we should at least create a fake TTB
section for them so that common architecture code may make the correct
assumptions about which regions exist.
Change-Id: I51aa259fbb7a9c0ade72db905b1762c1c721f387
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/25903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
SoC sdm845 uses ARCH Timer
Change-Id: I45e2d4d2c16a2cded3df20d393d2b8820050ac80
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
New API required by sdm845 DDR init/training protocol
TEST=build & run
Change-Id: I8442442c0588dd6fb5e461b399e48a761f7bbf29
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/25818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This creates a phaser variant for octopus. Nothing is set in the variant
files here; everything is picked up from baseboard.
BUG=b:78572180
TEST=None
Change-Id: Ia03e8af91741f1f7aa3a42ac28688b8b6a708932
Signed-off-by: Justin TerAvest <teravest@chromium.org>
Reviewed-on: https://review.coreboot.org/25877
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Save FSP provided memory HOB info as SMBIOS Table-17 format.
Firmware tools such as mosys, dmidecode uses SMBIOS Table-17 to
report memory metadata.
BUG=b:78651920
TEST=Build for Octopus and check 'dmidecode -t17' and
'mosys memory spd print all' to verify dimm info.
Change-Id: I9b032b766a2927725b2378f7f720644d4459f602
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Reviewed-on: https://review.coreboot.org/25881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Linux (4.16) assumes that the PIT interrupt is connected to the pin 0 of the
IOAPIC[0] and panics otherwise.
This might be a Linux bug. The MP Specification 1.4 does seem to mandate
sequential ordering for bus entries, but not for the I/O APICs.
Change-Id: Ibf823eb5b3a29e4590cba915069cdfe5f780edcd
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I6830a65bc9cea2907f4209bb97a53ccebcbf248d
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/25873
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With only one entry for Write Protect gpio in the OIPG package, the sysfs
entry /sys/devices/platform/chromeos_acpi/GPIO.x is created as "GPIO"
instead of "GPIO.x". This was causing crossytem to return error for wpsw_cur.
BUG=b:78009842
Change-Id: Ica60f342420d95d09a45580f2f940443c03601de
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/25892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
scan-build from Clang 4.0.1-3 from Debian Sid/unstable warns about the
issue below.
```
CC ramstage/southbridge/amd/cimx/sb800/lpc.o
src/southbridge/amd/cimx/sb800/lpc.c:102:6: warning: Value stored to 'end' is never read
end = resource_end(res);
^ ~~~~~~~~~~~~~~~~~
1 warning generated.
```
The variable is only used in the commented out print statement. So,
remove the unused variable, and directly use the value directly in the
print statement.
Change-Id: I3f759f6361ffeb07980cb10e17930e11d738a6a7
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I190d41816eef2a5b27a9026ed3d3c822eee8b42b
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21462
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Use acpigen method to return _STA instead of hardcoding unreadable
bytecode.
Change-Id: I290fb918675857e8ef798e3ab820bcfbdc6f5bdc
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
There is no physical LPC connector on apu3 mainboard. This board
contains only LPC debug test points with not all required pins exposed.
Change-Id: I83de16bb651846340788c6fa52c04b8e09e46a99
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/22630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I9495b47a85a6fb9d8d06d9a82c0444b794ec4933
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I489780d205e0784914063454c6071b046df6cc30
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I380368873e0508c3a55ac1c4ea0de172e675cf3a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I8d6f738d358a0a3d4b602a2a607143d98f4710ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I6fb31238afff56ff16cf58104f8bed8e9832544c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic1ea93ec54f6ca52e1af8ff09998b8859358b5a0
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23534
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I3e3bb9a0e9670fca67016523eac437140ff03188
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix coding style
Change-Id: Id1c7104eb8520f20c826f5936029739a093d4dba
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ic8218078f4b1075b41f769e26e34adf9c9b113ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23577
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I94a87d631c9336b861523592ff217fe823436b36
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This variable needs to be in byte so a division by 8 needs to happen.
This problem was introduced by 3cf94032b "nb/x4x/raminit: Rewrite SPD
decode and timing selection", but was probably not encountered because
such dimms are rather uncommon.
Change-Id: I2d57f5e584ac7fa1479791c239432005fe8c178d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/22991
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If4f3d3ed43fca1bff52ea99cc3eab29beb4e2a08
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25872
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I61ff3adb573ffc99f37a1cdcbf5d0d83b2dec0ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25854
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic81601cef841076a7548ccb3bdf0ed1b5420873e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I559e71ddc71115167ea4fa380c3c48ac68154f86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25855
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix regression after commit
0cc2ce4 arch/x86: Clean up CONFIG_SMP and MAX_CPUS test
In case PARALLEL_CPU_INIT=y BSP CPU no longer waited for APs to stop
before proceeding to next bootstates or device initialization.
Change-Id: Ie47e7896ed3d57d98a3ce6766e5c37b6dc22523b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/25874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Currently, native VGA initialization takes 90 ms during resume. But, it
is not needed. So, skip it to save that time.
Note, it is assumed that ACPI aware operating systems ship the
appropriate drivers to initialize the graphics device. With Linux, if
the module/driver *i915* is not loaded, then the display will stay
black.
TEST=On Lenovo X60t with Debian and Linux 4.15.11-1~bpo9+1, suspend and
resume system and notice display is correctly initialized by the driver
i915 after resume. Notice the messages below.
```
PCI: 00:02.0 init ...
Skipping native VGA initialization when resuming from ACPI S3.
PCI: 00:02.0 init finished in 56 usecs
PCI: 00:02.1 init ...
```
Change-Id: I6cc9dde94c18671d077132daf648e8ba557e7887
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25676
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This helps with meeting the line length limit.
Also, join some lines with the one above, as the line length is now met.
Change-Id: If457b3b592211aba1a3218501146b17abb5b799f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/25876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change configures a weak internal pull-up on ESPI_IO1 line for
octopus baseboard and variant bip. ESPI_IO1 is used as ALERT# line and
is expected to be open-drain. However, there is no external pull on
this line and so an internal pull-up is required to ensure proper eSPI
communication.
BUG=b:78497502
TEST=Verified that there is no eSPI communication failure between AP
and EC during boot-up and on suspend/resume.
Change-Id: Ic494aa7397b94bfd233ce10da8287660997b3377
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25900
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
|
|
Add support and enalbe cache-as-ram paging for glk to work around
a cache-as-ram corruption issue. glk executes verstage, romstage,
and FSP-M directly out of cache-as-ram (just like apl). However,
the front end on glk is very agressive about pulling cache lines
into L1I for potential execution. When the snoops hit in the L1D
and the cache lines are dirty the processor writes the line back.
However, there is no backing store for the dirty lines to go. As
such when the line is pulled back in the value is all 0xff's,
corrupting cache-as-ram.
To fix the issue one needs to enable paging with NX (no execute)
permissions which prevents the above actions from happening because
the TLB will indicate that shouldn't be fetched into the instruction
cache since data will be marked no execute.
The generated page tables are added to cbfs and only added to the
COREBOOT cbfs as they are only consumed in the early cache-as-ram
stages.
The page tables generated with:
$ go run util/x86/x86_page_tables.go \
--iomap_file=src/soc/intel/apollolake/glk_page_map.txt \
--metadata_base_address=0xfef00000 \
--pdpt_output_c_file=src/soc/intel/apollolake/pdpt.c \
--pt_output_c_file=src/soc/intel/apollolake/pt.c
Merged address space:
00000000d0000000 -- 00000000fef00000 UC NX : 375 big 256 small
00000000fef00000 -- 00000000fef20000 WB NX : 0 big 32 small
00000000fef20000 -- 00000000fefc0000 WB : 0 big 160 small
00000000fefc0000 -- 00000000ff000000 WB NX : 0 big 64 small
00000000ff000000 -- 0000000100000000 WP : 8 big 0 small
Total Pages of page tables: 5
Pages linked using base address of 0xfef00000.
BUG=b:72728953
Change-Id: Icde9cc0bf5079bb5821f4e59eb61e939c13d7062
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: If72ce868cdd06183e5055deb94b9d0cf12ed8738
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25858
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id13eef7f0fca0b929372490859aa4734ea7a9f23
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25868
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Iaed9c0882847511642d8eaab25e10d1ecf24bf90
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25867
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I147b3a2c79cd5e6b0e5fa3d23221a6afda8ba8f7
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25866
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
When smi.h is included to southbridge.h (to use SCI/SMI definitions within
southbridge.h definitions), this causes a collision of the definition of NONE
(ioapic.h also has a NONE definition). As NONE is an enumeration of interrupt
types (SCI/SMI), add INTERRUPT_ at the start of each definition.
This is preparation to have GPIO table/code also declare/program SCI/SMI.
BUG=b:72875858
TEST=Build grunt.
Change-Id: I5c7b798f9f4d7c2a9f9c606c7ebffb7004a37b99
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25845
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The following things are specific characteristic of mc_apl1 board
variant:
- initialization for the eDP to LVDS converter
- enable decoding address range for COM 3
- legacy IRQ routing for PCI devices
- wait function for old legacy devices
- set coreboot ready LED
Change-Id: I5c853e6caae6cc880ead436f232cabddeee6d09a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25822
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To be selected by mainboard Kconfig if the board hosts an ASMedia chip
that spuriously advertises ASPM features.
Change-Id: I05f9789bc14db56d2ac085f4f14047d80c3aefb5
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25619
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove VBOOT_VBNV_CMOS from the mainboard. It is selected in the
stoneyridge Kconfig.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: I30e517e06ab9d8f7d4a93bf82f12726756c44966
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25844
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add RW_NVRAM area to FMAP for VBOOT_VBNV_CMOS_BACKUP_TO_FLASH support.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: Id8c6f54634b94bf6ae3755a827e80d0862a42dd2
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25843
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Now that we have SPI flash writes working, we can support
VBOOT_VBNV_CMOS_BACKUP_TO_FLASH. This requires the mainboard to reserve
the area in FMAP.
BUG=b:77347873
TEST=Manually clear CMOS and check coreboot restores VBNV from flash.
Change-Id: I488dbfc4c200f5100374d47feb0a0522e6a60e88
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25842
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic81a172cdeb6c0dca396312393897613c1c51191
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25841
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I0c59cefa4067d3fc01b8425184e10d3caf1c81ac
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
RISC-V doesn't set up page tables anymore, since commit b26759d703
("arch/riscv: Don't set up virtual memory").
Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The driver relies on I/O space access functions (inb, etc.), which are
only available on x86.
Rather than explicitly disallowing it on ARM, allow it only on x86.
TEST=Configure for RISC-V, and see that "Serial port on SuperIO" is not
available in the "Generic Drivers" menu anymore.
Change-Id: Ib8e8c402264afeba6dc098683c5464af6edb3ba3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Update FSP header files to match FSP Reference Code Release v2.0.2 for
Gemimilake
CQ-DEPEND=CL:*594651,CL:*598345
Change-Id: I78d064db41a54d97e98d6e44e0832724127e5bfc
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-on: https://review.coreboot.org/25757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change enables xDCI controller on poppy, nautilus and soraka.
BUG=b:78577893
BRANCH=poppy
Change-Id: I9b0f81bda889b822479ead4d1acc2b613151a304
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25849
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change uses the newly added vboot_can_enable_udc to decide if it
is okay to enable xDCI in vboot developer mode.
BUG=b:78577893
BRANCH=poppy
Change-Id: Ia83b91ce17eec782faf5bb318ad8c00c09e2db05
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add a function that will check the various requirements to
enable USB Device Controller (UDC):
- developer mode enabled
- GBB flag set or VBNV flag set
If VBOOT is not enabled, then default is to allow UDC enabling.
BUG=b:78577893
BRANCH=poppy
Change-Id: Id146ac1065f209865372aeb423f66ae734702954
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25847
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds a helper function to read USB Device Controller (UDC)
enable flag from VBNV.
BUG=b:78577893
BRANCH=poppy
Change-Id: Ifd1e9b0781ffee242d695b72287632bc944a50c7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/25846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Set the SPI speed for Normal, Fast, AltIO, and TPM in bootblock.
This setup is needed when moving AGESA out of the bootblock. It sets the
SPI bus speed of the TPM access in verstage.
BUG=b:70558952
TEST=Boot with AGESA moved out of the bootblock.
Change-Id: Ida77d78eb1f290e46b57a46298400ed6c8015e2c
Signed-off-by: Marc Jones <marc.jones@scarletltd.com>
Reviewed-on: https://review.coreboot.org/25756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
It was decided to not add the buffers definitions, so the todo message
is obsolete. Replace it with minimum instructions about when a new buffer
will be needed.
It was also noticed a typo in one command. MBOX_BIOS_CMD_C3_DATA_INFO is
about S3 transition, so it should be called MBOX_BIOS_CMD_S3_DATA_INFO.
BUG=b:77940747
TEST=None.
Change-Id: I6143d7e85476061395962b95ad8864ac32a1d4a3
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/25740
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change "mttrs" to mtrrs.
Change-Id: I4e5930cdcba5e8f5366bb2d4ebbcb659c0c2eb27
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25823
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
For broken devices that spuriously advertise ASPM, make it possible to
decide ASPM activation in the device driver.
Change-Id: I491aa32a3ec954be87a474478609f0f3971d0fdf
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/25617
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables dptf for Octopus by adding dptf.asl in dsdt.asl.
BUG=b:74263914
BRANCH=None
TEST=None
Change-Id: I7194cdd2af88ff062ebcc92cc97b3cdc3d21ecd6
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/25809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
|
|
The grunt touchpad interrupt can be used as a wake source. For grunt,
the touchpad interrupt uses GPIO5 which corresponds to GEVENT7.
BUG=b:77602771
TEST=In OS: # cat /proc/acpi/wakeup
=> D015 S3 *enabled i2c:i2c-ELAN0000:00
TEST=powerd_dbus_suspend, touching touchpad (> 1 sec) wakes from S3.
Change-Id: I510642108a1257f6601f18c77cf3107573427f39
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25827
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The grunt EC uses GPIO24 (EC_PCH_WAKE_L) to signal wake-up events to the AP.
On Stoney, GPIO24 maps to GEVENT (GPE) 15.
The kahlee EC uses GPIO2 (EC_PCH_WAKE_L) to signal wake-up events to the AP.
On Stoney, GPIO2 maps to GEVENT (GPE) 8.
BUG=b:78461678
TEST=powerd_dbus_suspend, tap any key on keyboard wakes from S3.
TEST=sign in, EC: lidclose, EC: lidopen => system wakes from S3.
Change-Id: Ib1809740837e686992ff70b81933159a5dff7595
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25816
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
On the kahlee variant, EC_SMI_ODL is connected to GPIO6, which uses
GEVENT 10 (GPE10). Fix this up, and also clean up the EC_*_GPI
definition format a bit to match the format in the baseboard/gpio.h.
BUG=b:78461678
TEST=build coreboot for kahlee
Change-Id: I9445efbc02559c2a7c90f67bcb0154b04b03a1aa
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25826
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Apply commit 12d681b2 (intel/i945 gm45: Use acpi_s3_resume_allowed())
also to the Lenovo X200.
Change-Id: I4e1e0ccf2abbe175c0e5ddcbb6ee7bf6afb1ae88
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/25793
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Now that an idt is available in every stage utilize it for exception
processing to help catch and debug issues.
BUG=b:72728953
Change-Id: I69e7f938f36f2e522b787e311fd148bb8fd41247
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25764
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that assembly code isn't processing the idt gates there's
no need to ensure each vector entry is the same amount of code.
BUG=b:72728953
Change-Id: I2b248b26b9df36d6543163762c74622f79278961
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25765
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even though most x86 systems don't run with paging on, it's
helpful to always print it out for the ones that do without
making a more complicated handler. New dump will look like
the following:
Unexpected Exception: 6 @ 10:7ab84be2 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 7abb80ec ebx: deadbeef ecx: 00000000 edx: 00000002
edi: 7abb3000 esi: 00000004 ebp: 7abb2fd8 esp: 7abb2fb0
7ab84ba0: 00 01 00 83 ec 0c 6a 39
7ab84ba8: e8 8a 02 01 00 e8 e1 08
7ab84bb0: 00 00 e8 4e 3d 00 00 59
7ab84bb8: 5b 52 50 e8 f5 3c 00 00
7ab84bc0: c7 04 24 0a 00 00 00 e8
7ab84bc8: 3c 3d 00 00 c7 04 24 80
7ab84bd0: 00 00 00 e8 5f 02 01 00
7ab84bd8: e8 1e 38 01 00 e8 7e 50
7ab84be0: 01 00 0f 0b bb 98 ec ba
7ab84be8: 7a 83 c4 10 8b 03 85 c0
7ab84bf0: 0f 84 be 00 00 00 83 78
7ab84bf8: 04 00 8d 50 08 75 0c 56
7ab84c00: 56 ff 30 52 e8 f8 fe ff
7ab84c08: ff eb 0a 51 51 ff 30 52
7ab84c10: e8 2e ff ff ff 83 c4 10
7ab84c18: 83 c3 04 eb cf 89 d8 e8
BUG=b:72728953
Change-Id: I0e87bbe776f77623ad8297f5d80167998daec6ed
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25762
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Kconfig IDT_IN_EVERY_STAGE to optionally specify having
the interrupt handling code available to all stages. In order
to do this the idt setup is moved to a C module. The vecX
entries are made global so that a table of references to all
the interrupt vector entry points can be used to dynamically
initialize the idt. The ramification for ramstage is that
exceptions are initialized later (lib/hardwaremain.c). Not
all stages initialize exceptions when this Kconfig variable
is selected, but bootblock for the C, stages using
assembly_entry.S, and of course ramstage do. Anything left
out just needs a call to exception_init() at the right
location.
BUG=b:72728953
Change-Id: I4146a040e5e43bed7ccc6cb0a7dc2271f1e7b7fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: Ic525c92e73097752a7c690186dc2034785cac678
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/25821
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I52ef2da9148809923c90178a00ba94babba8d2f8
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25790
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The FU540 is the first RISC-V SoC with the necessary resources to run
Linux (an external memory interface, MMU, etc).
More information is available on SiFive's website:
https://www.sifive.com/products/hifive-unleashed/
Change-Id: Ic2a3c7b1dfa56b67cc0571969cc9cf67a770ae43
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
CSRs are XLEN bits wide (i.e. the same width as general purpose
registers), so size_t seems a little more correct than int.
This change doesn't affect functionality because MSTATUS_MPRV already
fits in 31 bits.
Change-Id: I003c1b88b4493681dc9b6178ac785be330203ef5
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/25625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The argument order for smi_write32() is offset, value. Current code had
it backwards.
So, when disable_all_smi_status() was called by sb_slp_typ_handler(),
instead of clearing pending flag SlpTypeEvent65 (0x2) in SMIx88 SmiStatus2
by writing 0x00000002 to 0xfed80288, it would instead write
0x00000088 to 0xfed80202 - clearing the lower 2 bytes of SMIx04
Event_Enable, which disabled the lower 16 GPEs from waking the system from S3.
Thus, the EC events (Keyboard / lid switch) [GPE15] and touchpad [GPE7]
did not work as wake up sources.
BUG=b:78461678
TEST=powerd_dbus_suspend, tapping any key on keyboard wakes from S3.
Change-Id: Ie4fbe6db1bb73f603dcf409117fcce93479a1f46
Fixes:081851a9e4 ("amd/stoneyridge: Add SlpTyp SMI handler")
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25815
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
smi_sources is a file local array of constants.
Change-Id: I431f181449a591ccaf8395f01a84c8e006a29b52
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-on: https://review.coreboot.org/25814
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CR 24h Bit 0 is PNPCVS.
Change-Id: Ia79a42ed60e82a84b60f254a0895ec52c1fcda0b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/23790
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When employing PAGING_IN_CACHE_AS_RAM more areas need to be
mapped in at runtime. Therefore, paging_identity_map_addr() is
added to support adding identity mappings. Because there are a
fixed amount of pages in cache-as-ram paging only the existing
paging structures can be used. As such that's a limitation on
what regions and length one can map. Using util/x86/x86_page_tables.go
to generate page tables will always populate all the page directory
pages. Therefore, 2MiB mappings are easy to map in.
BUG=b:72728953
Change-Id: Ibe33aa12972ff678d2e9b80874529380b4ce9fd7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/25718
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
