| Age | Commit message (Collapse) | Author |
|---|
|
1. Add STORAGE_UNKNOWN fw_config to enable all storage devices,
this is used for the first boot in factory.
2. Add fw_config probe to enable/disable devices in devicetree
instead of variant.c, it can avoid suspend(s0ix) fail issue.
BUG=b:328580882
TEST=On riven eMMC and UFS SKUs, boot to OS and run
`suspend_stress_test -c 10` pass.
Change-Id: I518f1a5955fb88f304663112f1e3d4c744bde183
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83405
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia does not support Thunderbolt anymore,
therefore disable related TBT setting.
The bujia fit image CL, cf. chrome-internal:7468938.
BUG=b:349923139
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
Change-Id: I4301a1f744aa9d4de9f0eba4147c49a4bb3ed922
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83402
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CMOS entry for CSE partition firmware was incorrectly labeled as
`ramtop` and `partition firmware` in the error messages.
This patch corrects the messages to accurately refer to `CSE partition
firmware`.
Additionally, the alignment and size check comments are updated to
reflect this change.
Change-Id: Ib3a7fb88f52c4d0c47d828bcd1c4649e62d19654
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This patch ensures CSE boot partition (RO/RW) version information only
log when the status is "success". If the status is not successful,
log an error message indicating the failure and status code.
This change avoids logging potentially incorrect version information
when the boot partition is not valid.
BUG=b:305898363
TEST=Builds successfully for google/rex variants.
Change-Id: I1932302b145326a1131d64b04af1cbfd6d050b7b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch refactors CSE config options, moving the selection of:
* `SOC_INTEL_CSE_LITE_SKU`
* `SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY_V2`
* `SOC_INTEL_CSE_SEND_EOP_ASYNC`
from the generic `BOARD_GOOGLE_REX_COMMON` to individual board models.
This enables finer-grained control over CSE features and sync behavior
on different Rex and variants platforms.
Specifically:
* `google/rex0`: Selects `SOC_INTEL_CSE_LITE_SKU` for CSE sync within
coreboot.
* `google/rex64`: Selects `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` and
`SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD` to defer CSE sync
to the payload.
BUG=b:305898363
TEST=Builds successfully for google/rex variants.
Change-Id: Ib5957496b1e1dad8d135b3e10541cb83dd339539
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83397
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes the selection of `SOC_INTEL_CSE_LITE_PSR` conditional
on both `MAINBOARD_HAS_CHROMEOS` and `SOC_INTEL_CSE_LITE_SKU` being
enabled.
This ensures that CSE Lite PSR is only active when both ChromeOS is the
target platform and CSE sync is performed inside coreboot.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I7199c034bbe6e7f077650417da67fa544f0b49d5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83396
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify the dependencies for `SOC_INTEL_CSE_RW_UPDATE` and
`ME_REGION_ALLOW_CPU_READ_ACCESS` config options to include
`SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD`.
This allows these features to be enabled even when CSE sync is performed
in the payload, not just within coreboot (when `SOC_INTEL_CSE_LITE_SKU`
config is enabled).
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Id6ec19d74237f278e8383c89923523871b2cc2db
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch updates FSP-M UPDs conditionally to ensure CSE firmware
updates and VGA initialization control only when
`SOC_INTEL_CSE_LITE_SKU` config is enabled.
This ensures eSOL rendering is tied to CSE sync performed in coreboot,
preventing unnecessary setup when sync is deferred to the payload.
Deferring CSE sync to the payload results in the depthcharge screen.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: Iffdd4b1be4abba8c57e28542058a575cc6de674c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch refactors the handling of CSE CBMEM IDs to enable platforms
to choose whether to perform CSE sync operations within coreboot or
defer it to the payload. This separation improves code organization,
ensuring `cse_lite.c` focuses on coreboot-specific CSE Lite tasks.
Now, platforms can select:
* `SOC_INTEL_CSE_LITE_SKU` for CSE sync within coreboot
* `SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD` for deferred payload sync
This change ensures mutually exclusive options, avoiding unnecessary
SPI flash size increases.
BUG=b:305898363
TEST=Builds and boots successfully:
* google/rex0 with SOC_INTEL_CSE_LITE_SKU
* google/rex64 with SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD
Change-Id: I74f70959715f9fd6d4d298faf310592874cc35d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83393
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboard is identified as 0Y2MRG.
The version tested is with Nvidia dGPU (gfx 560ti).
The flash is a 4MiB Winbond W25Q32BVSIG.
It can be flashed internally with flashrom.
Add a strap on the service mode pin of the mainboard for internal flash.
Tested working:
- SeaBIOS
- All USB ports
- SATA
- dGPU
- Ethernet
- Environment control
- GPIOs
- S3 Sleep mode
- WakeOnLan
Change-Id: I7d394794fec580bc7aed3f6396ceb47d4a6fd059
Signed-off-by: Ronald Claveau <sousmangoosta@aliel.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
A previous commit splits out Cirrus display support from Bochs display
support, with both using the pre-existing Bochs config options for the
requested display resolution. Rename these config names to clarify they
are not only specific to the Bochs display driver.
Change-Id: Ie0a5e75731231bb768d7728867196c9ab5c53a00
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
QEMU's Cirrus display device is supported along with the Bochs driver
since commit 7905f9254ebc ("qemu: cirrus native video init"). It is no
longer the default since QEMU 2.2. The code supporting it can work
independently of the Bochs display driver and depends more heavily on
port I/O and VGA support code, so split it from that code to make it
easier to support the Bochs driver in other architectures.
Change-Id: Ic9492b501ed4fdcbda6886db60b1e5348715e667
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Define the PCI I/O base address necessary to use port I/O functions on
the qemu-aarch64 mainboard, so that we can get the VGA display devices
working. The config value is from hw/arm/virt.c [1]:
[VIRT_PCIE_PIO] = { 0x3eff0000, 0x00010000 },
[1] https://gitlab.com/qemu-project/qemu/-/blob/v8.2.3/hw/arm/virt.c#L164
Change-Id: I85439ba68740d64f789983b37d9c95f849ce4f72
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82059
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows to use this driver for the SMBus console without sending an index
byte for every sent char (i.e. !CONSOLE_I2C_SMBUS_HAVE_DATA_REGISTER).
Tested with WiP VIA CX700-M2 port and FT4222H as receiver.
Change-Id: Ic368ef379039b104064c9a91474b188646388dd2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82763
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Myst boards.
TEST=untested, but same change as made for Mendocino
Change-Id: Ib4a78a39badf0a067e22eebe5869e5ea51723f35
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The APOB NV size/base are embedded into the amdfw binary and read by
the PSP. These need to be synchronized with the FMAP region used by
coreboot to store the APOB data. soc_update_apob_cache() will only
use RECOVERY_MRC_CACHE if supported and if vboot is enabled, so the
NV base passed to the PSP needs to reflect that as well.
This fixes the issue of RAM training running on every boot on
non-vboot builds for Skyrim boards.
TEST=build/boot Skyrim (Frostflow), verify RAM training only
run on first boot after flashing.
Change-Id: I9be1699d675331b46ee9c42570700c2b72588025
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83400
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Not every I2C target requires a register address. Not sending one
for every console char saves us a lot of overhead.
Change-Id: I1c714768fdd4aea4885e40a85d21fa42414ce32c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82762
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie44fdac6904a4467e408882bb8a5e08e6ff73f32
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82761
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ib757c0548f6f643747ba8d70228b3d6dfa5182cd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82752
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Bujia has 4 thermal sensors, so add two missing sensors settings.
BUG=b:351917517
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot.
check ACPI SSDT table have new TSR info.
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
check SSDT.dsl
Change-Id: Id9a17a22a717faac829e6b5e300351187a62dd43
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
TSEG_SZ_MASK is already defined in "q35.h"
Change-Id: I32ea08c18e1c41d16137ea14a1643f8c8d527722
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83386
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ucsi_enabled flag is no longer used by the EC. Update coreboot to only use only EC_FEATURE_UCSI_PPM to determine whether UCSI is enabled.
BUG=b:319124515
TEST=emerge-brox coreboot chromeos-bootimage
Cq-Depend: chromium:5664227
Change-Id: Ia9d820c637e56a527fd90f45b1848158a960dee7
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83252
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Forest Mittelberg <bmbm@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board has a DVI-I connector, which supports both digital and analog
display outputs. The I2C bus to retrieve the EDID is shared between both
outputs, so `select GFX_GMA_ANALOG_I2C_HDMI_B` to describe this.
Can't currently test this due to lack of hardware.
Change-Id: Ib8239917e2f7ee5bb982621752ec406c2d3ca302
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82753
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Chrome EC currently supports two ways to read battery strings on
ACPI platforms:
* Read up to 8 bytes from EC shared memory BMFG, BMOD, ...
* Send a EC_CMD_BATTERY_GET_STATIC host command and read strings from
the response. This is assumed to be exclusively controlled by the OS,
because host commands' use of buffers is prone to race conditions.
To support readout of longer strings via ACPI mechanisms, this change
adds support for EC_ACPI_MEM_STRINGS_FIFO (https://crrev.com/c/5581473)
and allows ACPI firmware to read strings of arbitrary length (currently
limited to 64 characters in the implementation) from the EC and to
determine whether this function is supported by the EC (falling back to
shared memory if not).
BUG=b:339171261
TEST=on yaviks, the EC console logs FIFO readout messages when used in
ACPI and correct strings are shown in the OS. If EC support is
removed, correct strings are still shown in the OS.
BRANCH=nissa
Change-Id: Ia29cacb7d86402490f9ac458f0be50e3f2192b04
Signed-off-by: Peter Marheine <pmarheine@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Tested on ThinkPad T420 with the i7-3940XM.
Change-Id: I064af25ec4805fae755eea52c4c9c6d4386c0aee
Signed-off-by: Anastasios Koutian <akoutian2@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
update DTT settings for thermal control,according to b:348285763#comment6.
BUG=b:348285763
TEST=emerge-brox coreboot
Change-Id: I67e16a2596884d501273a5787119406dff7a20f9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83304
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Orisa uses PDC<->PMC direct connection for USBC mux configuration.
Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it.
BUG=b:345070027
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I3f740bedc8ff667d15f077fa57d201ab0d42ebf8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83324
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Add a new fw config field to determine which firmware edition shall be
flashed to the PDC.
BUG=b:334793686
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I817e9415aca1d2f68b484d8e23b581e1a75d6f84
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83353
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I110cc95d536cb0fd3b5db85b84cca7a96e31401c
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83253
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SKU1 is UFS, SKU2 is NON-UFS, it needs to select this config to disable
the MPHY clock in the SKU2 configuration to ensure that S0ix functions
normally.
BUG=b:350609955
BRANCH=None
TEST=Boot image on SKU1/SKU2 and check S0ix working.
Change-Id: I2fbcc7ffaabf3c085a3345ec94a8d45b225b3450
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Use the PCI_DEVFN macro to make the calculation of the ivhd->device_id
value a bit clearer.
TEST=Timeless build results in identical binary for Mandolin
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b7949ad3524790e7d7d527c488a32e785f55bc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83343
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add hid report address for gt7986u.
BUG=b:342932183
BRANCH=None
TEST=Verify touchscreen work normal.
Change-Id: I464c2691505083314528519f608108c8a31e6cc0
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83201
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update generic property list for build test result fail
https://qa.coreboot.org/job/coreboot-gerrit/259702/
BUG=b:342932183
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: Iecd8573343706184dce5edfc12fe7a143390e0e9
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83301
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
This patch creates a new domika variant which is a Twin Lake platform.
This variant uses Yavilla board mounted with the Twin Lake SOC and hence
the plan is to reuse the existing yavilla code.
BUG=b:350399367
BRANCH=firmware-nissa-15217.B
TEST=build, and boot into OS
Change-Id: I42c56770f8b8d6018592253d2bb16b8166eb5719
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Disable VBOOT_EARLY_EC_SYNC for all trulo boards.
BUG=b:345112878
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I10b027d19dedbb190fc960b949017f9e4830d52a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83303
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Domain device objects are created with HID/CID/UID/_OSC/_PXM
Dynamic domain SSDT generation could benefit the support of SoCs with
multiple SKUs, or the case where one set of codes supports multiple
SoCs. One possible side-effect might be the extra performance cost for
generating these tables, which should not bring big impact on high
performance server CPUs.
GNR codes run with dynamic domain SSDT generation to fit for both
GraniteRapids and SierraForest SoCs.
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I28bfdf74d8044235f79f67d832860d8b4306670c
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is a rudimentary port of this board. It was done with Haswell
Autoport, wherein some adjustments for Broadwell were made
(Thanks to Angel Pons!).
The VBT was copied from /sys/kernel/debug/dri/1/i915_vbt on version
2.20 of the vendor firmware.
Working:
- Broadwell MRC.bin
- S3 suspend and resume
- All DIMM slots
- Libgfxinit
- HDMI-Out Port
- DVI-I Port (including passive DVI to VGA adapter)
- USB 2.0 Ports
- USB 3.1 Gen1
- RJ-45 LAN Port
- SATA3 6.0 Gb/s Connectors
- m.2 PCIe SSD
- mPCIe WiFi slot
- x16 PCIe slot
- USB 3.1 Gen1 Header
- Front Panel Audio Connector
- edk2
Not yet tested:
- SATA Express 10 Gb/s Connector
- HDMI-In Port
- DisplayPort 1.2
- Optical SPDIF Out Port
- PS/2 Mouse/Keyboard Port
- USB 2.0 Headers
Not working:
- Broadwell CPUs, see commit f5105313cf69 (mb/asrock/z97_extreme6:
Add new mainboard)
Special thanks to Angel Pons for guiding me through the process of
porting this board and pushing it to Gerrit!
Change-Id: I3b940e9281814e8360900221714c0dfa3ae39540
Signed-off-by: Jan Philipp Groß <jeangrande@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82760
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To publish the Bluetooth Regulator Domain Settings under the right
ACPI device scope, the wifi generic driver requires the bluetooth
companion to be set accordingly.
BUG=b:348345301
BRANCH=firmware-rex-15709.B
TEST=BRDS method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: I7f56ab8ac88c1fbc0b223b4286d2a998e424a46e
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83299
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for the configuration of 320MHz Bandwidth per MCC based on
countries. The implementation follows document #559910 Intel
Connectivity Platforms BIOS Guidelines revision 8.3.
BUG=b:333804562
BRANCH=firmware-rex-15709.B
TEST=WBEM method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Ie76794825f1a0104d199c078aa4ffc714aa95b17
Signed-off-by: Poornima Tom <poornima.tom@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81790
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The 'Bluetooth Increased Power Mode - SAR Limitation' feature provides
ability to utilize increased device Transmit power capability for
Bluetooth applications in coordination with Wi-Fi adhering to product
SAR limit when Bluetooth and Wi-Fi run together.
This commit introduces a `bluetooth_companion' field to the generic
Wi-Fi drivers chip data. This field can be set in the board design
device tree to supply the bluetooth device for which the BRDS function
must be created.
This feature is required for Meteor Lake rex karis variant.
The implementation follows document 559910 Intel Connectivity
Platforms BIOS Guideline revision 8.3 specification.
BUG=b:348345301
BRANCH=firmware-rex-15709.B
TEST=BRDS method is added to the CNVW device and return the data
supplied by the SAR binary blob
Change-Id: Iebe95815c944d045f4cf686abcd1874a8a45e209
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83200
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This port was done via autoport and subsequent manual tweaking.
Thanks to Angel Pons for helping me with the misbehaving ASM1061 ASPM!
The board features two socketed DIP-8 SPI flash chips, as well as a
BIOS selection via jumper and onboard Power and Reset switches.
Working:
- Haswell MRC.bin
- All four DDR3/DDR3L DIMM slots
- S3 suspend and resume
- Libgfxinit
- HDMI-Out Port
- both RJ-45 Gigabit LAN Ports
- USB 2.0 Ports
- USB 3.1 Gen1 Ports
- both USB 3.1 Gen1 headers
- HD Audio Jack (audio output)
- all six SATA3 6.0 Gb/s connectors by Intel
- all four SATA3 6.0 Gb/s connectors by ASMedia ASM1061
- all three PCI Express 3.0 x16 slots
- PCI Express 2.0 x1 slot
- half mini-PCI Express slot
Working (board-specific)
- Power Switch with LED (functional, yet no LED)
- Reset Switch with LED (functional, yet no LED)
- BIOS Selection via jumper
not (yet) tested:
- IR header
- COM Port header
- DisplayPort
- eSATA connector
- USB 2.0 headers
- PS/2 Mouse/Keyboard Port
- HDMI-In Port
- PCI slots
not (yet) working:
- Front panel audio connector
- Software fan control: While the Nuvoton chip is correctly discovered,
the numbering of the fan connectors is faulty, resulting in the wrong
fan being controlled.
- Dr. Debug: on vendor firmware, the LEDs turn off after successful
boot. On coreboot, the LED shows two bright zeros after boot.
Change-Id: Iae0b73d8e81be90ec3a2d5463df3ed170f603266
Signed-off-by: Jan Philipp Groß <jeangrande@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use FW_CONFIG to differentiate MAX98390 and TAS2563. Since config
GERALT_USE_MAX98390 is no longer needed after using FW_CONFIG,
we remove GERALT_USE_MAX98390 from Kconfig.
BUG=b:345629159
BRANCH=none
TEST=emerge-GERALT coreboot
TEST=Verify beep function through deploy in depthcharge successfully.
Change-Id: Ie9f0cbc30dd950b85581fc1924fa351efe1e0aab
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add RAM ID for
K3KL9L90CM-MGCT 0 (0000)
BUG=b:320203629
BRANCH=firmware-rex-15709.B
TEST=Run part_id_gen tool without any errors
Change-Id: Icb84838a6964b9318ded0573ad58a4fd1221867f
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83300
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Before:
I2C0 - 401kHz
I2C4 - 405kHz
After:
I2C0 - 392kHz
I2C4 - 395kHz
HW: Change R8409/R8411 to 33ohm.
BUG=b:349743464,b:349735055
TEST=emerge-brox sys-boot/coreboot
Test pass by EE
Change-Id: I985837b1b80e973f148529b446905580c0f95e98
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83290
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
|
|
Fast boot will used pre-saved hardware configuration data to
accelerate the boot process, e.g. DDR training is skipped by using
pre-saved training data. Enable fast boot on cold and warm resets
by default.
Change-Id: Ib5dc76176b16ea1be5dd9b05a375c9179411f590
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82080
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If BMP_LOGO is set, currently display_init_required() will always return
1, so that platform code will always initialize display. However, that
information isn't passed to vboot, which may result in unnecessary extra
reboots, for example when the payload needs to request display init (by
vb2api_need_reboot_for_display()).
Since there is already a Kconfig option VBOOT_ALWAYS_ENABLE_DISPLAY to
tell vboot that "display is available on this boot", enable it by
default if BMP_LOGO is set.
BUG=b:345085042
TEST=none
BRANCH=none
Change-Id: I20113ec464aa036d0498dedb50f0e82cb677ae93
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Working:
- Both DIMM slots
- All Rear USB 2.0 ports
- Integrated graphics (libgfxinit)
- Realtek RTL8111F GbE
- Flashing internally with flashrom (Note: Works from stock too
due to Gigabyte not following Intel recommendations,
confusing ME)
- SeaBIOS (1.16.3) to boot Arch Linux Installer
- EDK II (uefipayload_202309, MrChromebox) to boot Arch Linux Installer
- Audio output (green jack, rear)
- S3 suspend/resume
- VBT
Untested for now (i.e. should work, will eventually test):
- EHCI debug
- Front USB 2.0 ports
- The other audio jacks
- PCIe ports
- Non-Linux OSes
Untestable (i.e. cannot test due to unavailable hardware):
- PS/2 port
- Serial port
- SATA ports
Not working:
- USB 3.0 ports: The on-board VLI VL805 does not have a flash chip,
so its firmware needs to be loaded on each boot. However,
documentation about the (chip-specific) firmware loading procedure
is nowhere to be found.
- Super I/O automatic fan control: not yet implemented in coreboot.
To control fans, use software fan control methods in the meantime.
Change-Id: I106c195c890823f07227739c6b30133b996f6510
Signed-off-by: PugzAreCute <me@pugzarecute.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83267
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This change skips the ME firmware version logging in
print_me_fw_version() if the ME firmware SKU is detected as Lite SKU.
The reasoning is that the RO (BP1) and RW (BP2) versions are already
logged by the cse_print_boot_partition_info() function for Lite SKUs,
making the additional log redundant.
The check for the Lite SKU has been moved to print_me_fw_version(),
where the decision to print the version is made, instead of in
get_me_fw_version(), where the version information is retrieved.
TEST=Able to build and boot google/rex.
w/o this patch:
[DEBUG] ME: Version: Unavailable
w/ this patch:
Unable to see such debug msg.
Change-Id: Ic3843109326153d5060c2c4c25936aaa6b4cddda
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This change modifies the get_me_fw_version() function to be statically
scoped within src/soc/intel/common/block/cse/cse.c, as it is only used
by the print_me_fw_version() function in the same file.
The function declaration is also removed from intelblocks/cse.h.
The order of the function definitions in cse.c was also changed to be
more logical, with the now static helper function get_me_fw_version()
defined first, before it is used.
TEST=Able to build google/rex.
Change-Id: Idd3a6431cfa824227361c7ed4f0d5300f1d04846
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83257
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch disables the ME status reporting functionality
(dump_me_status, print_me_fw_version) in the CSE driver when
SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is defined.
This is likely intended for platforms or configurations where the
CSE communication is only limited to payload.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I5e360408a7847968117df475ff244d79ceafa23f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83233
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch skips the ISH firmware version print when CSE sync is done
by payload. The payload is responsible to dump the ISH version as
ISH version resides into the CSE boot partition table.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I1895a4d3c44838a9cc6380912f09aa4f0e6687bd
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch skips the CSE firmware version print when CSE sync is done
by payload. The payload is responsible to dump the CSE version.
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I1a9e5583c79ebd81291a4b3ae24529b4582502cb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Refactor CSE lite End-of-Post (EOP) configs to support
the alternative of sending CSE communication from the payload.
When the SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD config is selected, coreboot
will skip initiating CSE EOP operations and rely on the payload CSE
driver implementation.
The following configs are modified to ensure coreboot skips CSE
communication when SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is enabled:
- SOC_INTEL_CSE_SEND_EOP_EARLY
- SOC_INTEL_CSE_SEND_EOP_LATE
- SOC_INTEL_CSE_SEND_EOP_ASYNC
- SOC_INTEL_CSE_SEND_EOP_BY_PAYLOAD
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: Ia6b616163d02be8d637b134fd3728c391fc63c90
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83229
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Refactor CSE lite configs (specifically CSE sync related) to support
the alternative of sending CSE communication from the payload.
When the SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD config is selected, coreboot
will skip initiating CSE sync operations and rely on the payload CSE
driver implementation.
The following configs are modified to ensure coreboot skips CSE
communication when SOC_INTEL_CSE_LITE_SYNC_BY_PAYLOAD is enabled:
- SOC_INTEL_CSE_LITE_PSR
- SOC_INTEL_CSE_PRE_CPU_RESET_TELEMETRY
- SOC_INTEL_CSE_LITE_SYNC_IN_ROMSTAGE
- SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE
BUG=b:305898363
TEST=Able to build google/rex.
Change-Id: I5ddaf6e29949231db84b14bf7ea2d34866bb8e6c
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83228
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: I3cb1f11beba61afdf2be6188bde9ff135f8ace50
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83288
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This port was done via autoport and subsequent manual tweaking.
Special thanks to Nicholas Chin! This port would have never succeeded
without his help.
The board features two socketed DIP-8 SPI flash chips, as well as a
BIOS selection switch and onboard Power and Reset switches.
Working:
- Haswell MRC.bin
- All four DDR3/DDR3L DIMM slots
- S3 suspend and resume
- Libgfxinit
- HDMI-Out Port
- USB 2.0 Ports
- Vertical Type A USB 2.0
- USB 3.1 Gen1 Ports
- HD Audio Jack (audio output)
- Front panel audio connector (audio output)
- RJ-45 Gigabit LAN Port
- SATA3 6.0 Gb/s connectors
- mSATA/mini-PCI Express slot
- half mini-PCI Express slot
- PCI Express 3.0 x16 slots (both)
- PCI Express 2.0 x4 slot
- PCI Express 2.0 x1 slot
Working (board-specific)
- Power Switch with LED (functional, yet no LED)
- Reset Switch with LED (functional, yet no LED)
- BIOS Selection Switch
- Slow Mode Switch (locks the CPU at 800MHz)
not (yet) tested:
- IR header
- COM Port header
- Power LED header
- eSATA connector
- USB 2.0 headers
- PS/2 Mouse/Keyboard Port
- HDMI-In Port
- Optical SPDIF Out Port
not (yet) working:
- Software fan control: While the Nuvoton chip is correctly discovered,
the numbering of the fan connectors is faulty, resulting in the wrong
fan being controlled.
- Dr. Debug: on vendor firmware, the LEDs turn off after successful
boot. On coreboot, the LED shows two bright zeros after boot.
- Post Status Checker (PSC)
Change-Id: Iaa156b34ed65e66dd5de5a26010409999a5f8746
Signed-off-by: Jan Philipp Groß <jeangrande@mailbox.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
The filename of the Elkhart Lake FSP binary changed in the FSP
repository. It's unlikely that it will be renamed to the original name
soon. Thus, update the filename in the coreboot repository.
Updating from commit id cc6399e:
2024-03-04 15:40:41 +0800 - (IoT MTL-UH & MTL-PS PV (3471_49) FSP)
to commit id 800c857:
2024-06-25 15:47:28 +0800 - (Update Fsp.fd)
This brings in 23 new commits:
800c857 Update Fsp.fd
41e4590 NEX AZB IPU24.4 (5254_00) FSP
0efd8a3 IoT RPL-PS PV (5045_47) FSP
196e3fe Update README.md
380afd8 Update README.md
5dc88ca NEX ADL-PS IPU24.3/MR6 (5045_02) FSP
22762e9 Merge branch 'master' of https://github.com/intel/FSP
8134dbd Elkhart Lake IPU2024.3 FSP
3819544 add required SECURITY.md file for OSSF Scorecard compliance
a6ee963 Delete AlderLakeFspBinPkg.dec
9d819ea Deprecate Client/AlderLakeFspBinPkg
f963690 Raptor Lake FSP C.1.C8.50
f67f9ef Raptor Lake FSP C.0.C8.50
68c3cfa NEX ADL-PS IPU 2024.3 (5045_02) FSP
f0d04d9 NEX ADL-P IPU 2024.3 (5045_02) FSP
6fa139c NEX ADL-S IPU 2024.3 (5045_02) FSP
c4af5ac NEX TGL IPU 2024.3 (7092_01) FSP
8cf0372 IoT ADL-N MR4 (5061_00)
e5ceb0b Merge branch 'master' of https://github.com/intel/FSP
aada6a5 Elkhart Lake IPU2024.2 FSP
90d1d3b Update README.md
1a5a3ee Testing
61c069a NEX RPL-S MR3 (4445_03) FSP
Change-Id: I47013bce65054f2c496c9aa7c16e55b51d65e5fe
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83294
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define a devicetree alias for `cpu_cluster` so that it can be referenced
in C code as `DEV_PTR(cpu_bus)`.
Change-Id: Id6ead3d98d8fc17cab44ecf0b2af60a23187e036
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Currently the HiFive Unleashed produces the following exception:
[DEBUG] Exception: Load address misaligned
[DEBUG] Hart ID: 0
[DEBUG] Previous mode: machine
[DEBUG] Bad instruction pc: 0x080010d0
[DEBUG] Bad address: 0x08026ab3
[DEBUG] Stored ra: 0x080010c8
[DEBUG] Stored sp: 0x08010cc8
The coreboot LZ4 decompression code does some misaligned access during
decompression which the FU540 apparently does not support in SRAM.
Make the compiler generate code that adheres to natural alignment by
fixing the LZ4_readLE16() function and creating LZ4_readLE32().
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Id165829bfd35be2bce2bbb019c208a304f627add
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81910
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The touchscreen vendor (Goodix) needs to use this value
(hid-report-addr) in the touch driver, and this value
needs to be changed later.So add generic property list to allow populating vendor specific device properties to ACPI SSDT table.
BUG=b:342932183
BRANCH=None
TEST=emerge-brox coreboot
Change-Id: I8b18e0a2925e6fd36e3a470bde9910661b7558b8
Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83139
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifd19cdcfbdf0b01984e0db0aa880fdcb256663b4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83255
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add LCE_LMFBX101117480 MIPI panel for Wugtrio.
Datasheet: LMFBX101117480-10.1-TLCM-24.05.20-2.pdf
BUG=b:331870701
TEST=emerge-staryu coreboot chromeos-bootimage
BRANCH=corsola
Change-Id: I863e172400ffb26b5c9c240a21d15c6a2240b4ad
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add STA panel LCE_LMFBX101117480 serializable data to CBFS.
Datasheet: LMFBX101117480-10.1-TLCM-24.05.20-2.pdf
About the init code, we communicated with the vendor through the
datasheet to confirm the writing method of each register value.
BUG=b:331870701
TEST=build and check the CBFS includes the panel
BRANCH=None
Change-Id: I60858109e4b07f720461e320212d7b197ec1130c
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Configuring USB2_PORT_EMPTY is equal to just not setting it. So remove
it to clean up a bit.
Change-Id: I6854f4a0d3e7b51b242549556a5838d4183d3473
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I1992c20dcdc5e974143690d44ee199d7c3394cfd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: I6d7bcd298408e15677f27d1a9797a490c57c9fc9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Ide5126c6e642ca16249efeaf46321724f2ddce9a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Configuring them to 0 is equal to not configuring them at all. So remove
them to clean up a bit.
Change-Id: I9a9eb370e8e9e8874ad8b4b8ac0f43d61c1a4b9b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I03508c50fe56fd85f8bf89f724863e546d4140e9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configuring them to 0 is equal to not configuring them at all. So remove
them to clean up a bit.
Change-Id: I18134ac784fffb703e1fe513e5914f05faa749c9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83248
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also, remove superfluous comments from devices which repeat their name.
Change-Id: I009330042b59c9e6e78aa6f3819546b771b26ff0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83244
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Rename fdt_node_name to the actual function name and also rename the
references.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I527146df26264a0c3af1ad01c21644d751b80236
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83084
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
In the HD Audio Specification Rev. 1.0a, every bitfield in the GCAP
register is RO (Read Only). However, it is known that in some Intel
PCHs (e.g 6-series and 7-series, documents 324645 and 326776), some
of the bitfields in the GCAP register are R/WO (Read / Write Once).
GCAP is RO on 5-series PCHs; 8-series and 9-series PCHs have a lock
bit for GCAP elsewhere.
Lock GCAP by reading GCAP and writing back the same value. This has
no effect on platforms that implement GCAP as a RO register or lock
GCAP through a different mechanism.
Change-Id: Id61e6976a455273e8c681dbeb4bad35d57b1a8a2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83218
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For Gen1 SoCs, the range starting from the end of VTd BAR to the end
of 32-bit domain MMIO resource window is reserved for unknown devices.
Get them reserved.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ie133fe3173ce9696769c7247bd2524c7b21b1cf8
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
vtd_probe_bar_size is used to decide the BAR size.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ie45dd29e386cbfcb136ce2152aba2ec67757ee3c
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82431
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VT-d spec 4.0 supports size definition for DRHD BAR to support DRHD
sizes larger than 4KB. If the value in the field is N, the size of
the register set is 2^N 4 KB pages.
Some latest OS (e.g. Linux kernel 6.5) will have VTd driver trying
to use the beyond 4KB part of the DRHD BAR if they exist. They need
the DRHD size field to set up page mapping before access those
registers.
Re-add acpi_create_dmar_drhd with a size parameter to support the
needs.
TEST=Build and boot on intel/archercity CRB
Change-Id: I49dd5de2eca257a5f6240e36d05755cabca96d1c
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82429
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8ce94c8bc7ed137eaace12d6cb0befa6c0d39a37
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82925
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
When CNVi based Wifi6 is disabled, CNVi based Bluetooth must be turned
off, based on fw_config. Otherwise, when device boots without the cbi
settings for wifi6, boot may fail with assertion error for line 817 &
819 of file 'src/soc/intel/alderlake/fsp_params.c'.
BUG=b:345596420
BRANCH=NONE
TEST=Dut boots fine with both Wifi6 & Wifi7 based cbi settings, along
with enumeration of corresponding BT device.
Change-Id: I03fde02fa4b36f4e47d6f0e95675feddb3bee7cd
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
PCIe based GPIOs of Wifi7 module are enabled based on firmware config.
BUG=b:345596420
BRANCH=NONE
TEST= Based on fw config configured, wifi6 or wifi7 along with
bluetooth ports are detected.
Change-Id: If0584e91b5143c6df742961657d242c046409b3a
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
PCIe based Bluetooth is on port8. This cl enables bluetooth for PCIe
based Wifi7 module.
BUG=b:345596420
BRANCH=NONE
TEST=With proper FW config enabled, BT gets detected on port8
Change-Id: I989cf6122f2555cc89f622e4ce5d21b574d0458e
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83076
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable pcie based, discreete wifi7 on root port4.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi7 module detection based on cbi settings
Change-Id: I8c2f4a750a1cb00c587bce21bc83ee583d0f4341
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83075
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new fw config field for wifi category as WIFI_6, which is CNVi
based and WIFI_7, which is PCIe based. Also, enable WIFI_6 for existing
CNVi based wifi port as well as bluetooth port.
BUG=b:345596420
BRANCH=NONE
TEST=Verified Wifi6 module detection
Change-Id: I4b218f772405bdb1b741b4d5e640d7b4f145cd76
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83074
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wake configuration and set 'add_acpi_dma_property'=true for CNVi.
Also, add "set 'add_acpi_dma_property' to true to tell the OS to enforce DMA protection for this device.
BUG=b:345596420
BRANCH=NONE
TEST=SSDT dump showed below:
Scope (\_SB.PCI0.RP01.WF00)
{
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x23,
0x03
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("70d24161-6dd5-4c9e-8070-705531292865"),
Package (0x01)
{
Package (0x02)
{
"DmaProperty",
One
}
}
Change-Id: If04539fe8dceb5c2edfc06a324ede11147b78b6d
Signed-off-by: Poornima Tom <poornima.tom@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83138
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6cc2b3947a2c79e8962985e035e7cc74c2deb307
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83215
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
This patch configures Serial IO UARTs mode as below.
UART0 and UART1 in PCI mode and keep UART2 disable as per hardware design.
BUG=b:338917836
BRANCH=firmware-brya-14505.B
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I5617331aaf505b97e25a717b145fb70dc53f5a38
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83205
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
ALC257 does not supoort built-in digtal buzzer, So use external pwm
to PCBEEP for beep sound.
BUG=b:346956771
BRANCH=None
TEST=emerge-brox coreboot sys-boot/chromeos-bootimage
firmware-shell: devbeep -> can output beep normally.
Change-Id: If924f9f27f229420e78015f418a97b2d5daf62e5
Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add 802.11be (aka. Wi-Fi 7) enable/disable support based on document
559910 Intel Connectivity Platforms BIOS_Guidelines revision 8.3.
There are countries where Wi-Fi 7 should be disabled by default. This
adds capability for OEM to enable or disable by updating the board
specific Specific Absorption Rate (SAR) binary.
BUG=b:348345300
BRANCH=firmware-rex-15709.B
TEST=SSDT dump shows that the _DSM method returns the value supplied
by the SAR binary for function 12
Change-Id: Ifa1482d7511f48f5138d4c68566f07ce79f37a7a
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
Since the 'maxlen' parameter's type is changed to size_t, the type of
the local variable 'i' which this is compared against should also be
changed to size_t.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe35d3741bc6d8a16a3bad3ec27aafc30745d931
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83224
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
The return type of strspn and strcspn is supposed to be a size_t and not
a signed integer.
TEST=Now the openSIL code can be built with the coreboot headers without
needing to add '-Wno-builtin-declaration-mismatch' or
'-Wno-incompatible-library-redeclaration' to the cflags. Before the
build would error out with various 'mismatch in return type of built-in
function' errors.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0ff612e2eee4f556f5c572b02cbc600ca411ae20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83223
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The third parameter of strncpy and strncmp is supposed to be a size_t
and not a signed int.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I485e45e18232a0d1625d4d626f923ec66cfbe4a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83222
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Use the existing `azalia_enter_reset()` function instead of explicitly
clearing the bit (and having to explain in a comment what this means).
Change-Id: I04924e68420a93a1ad46f5a7ab359e38c0f7e210
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83217
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Now that the device tree code has been made available in libpayload, we
should reintroduce the node and property allocation optimization for
libpayload's memory allocator that was originally dropped when porting
this code from depthcharge to coreboot.
On a Qualcomm SC7180 unflattening a normal ChromeOS kernel device tree,
this saves roughly ~145ms. The total scratch space used is about ~1350
nodes and ~5200 properties, so we leave a little room to grow with the
constants hardcoded here.
Change-Id: I0f4d80a8b750febfb069b32ef47304ccecdc35af
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch adds initial code block required to build google/fatcat
board with Intel Meteor Lake Silicon. Later after the initial board
power-on is successful, we shall switch to Panther Lake silicon to
build the google/fatcat reference design.
BUG=b:347669091
TEST=Able to build the google/fatcat and able to hit power-on reset
using Intel Meteor Lake SoC platform.
Change-Id: Iad78aec51b2f0f240991c9c35842764a60be988e
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
For most of SoCs, DRHD is by default with the size of 4KB. However,
larger sizes are allowed as well. Rename acpi_create_dmar_drhd to
acpi_create_dmar_drhd_4k to support the default case while a later
patch will re-add acpi_create_dmar_drhd with a size parameter.
TEST=intel/archercity CRB
Change-Id: Ic0a0618aa8e46d3fec2ceac7a91742122993df91
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Follow nissa baseboard setting for storage field.
option STORAGE_EMMC 0
option STORAGE_NVME 1
option STORAGE_UFS 2
BUG=b:333486830
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I75b4b3037c245f7d517cb33d487f71da98f6c4e8
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The Fn key on Lotso emits a scancode of 94 (0x5e).
BUG=b:322721490
TEST=Flash Lotso, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: I999627f0ea9db1d79376150a04920ac877a48447
Signed-off-by: Wen Zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83204
Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
On board version 1 and later, touchscreen is not stuffed. Hence
configure the relevant GPIOs as not connected, disable the concerned I2C
bus in the devicetree as well as SoC chip config for board version 1.
BUG=b:347333500
TEST=Build Brox BIOS image and boot to OS. Ensure that there are no
peripherals detected in I2C 1 bus through i2cdetect tool. Ensure that no
touchscreen devices are exported through ACPI SSDT table. Ensure that
other I2C peripherals - eg. Trackpad and Ti50 are functional. Ensure
that the device is able to suspend and resume for 25 cycles.
Change-Id: Ia0578b90b0e8158ae28bcc51add637844ba6acf6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83199
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kernel need the default brightness steps. Otherwise following error
messages are observed in the kernel:
[Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
ACPI BIOS Error (bug): Could not resolve symbol [^^XBCL], AE_NOT_FOUND
ACPI Error: Aborting method \_SB.PCI0.GFX0.LCD0._BCL due to previous
error (AE_NOT_FOUND)
BUG=b:346807006
TEST=Build Brox BIOS image and boot to OS. Ensure that the concerned
error messages are resolved. Ensure that the backlight controls are
functional.
Change-Id: Icd569b0efef31908edb1b7dc384e60a16fc5bd0c
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Change-Id: I64ffba35303c1291f56ae6a038325a7482158ad3
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83189
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Marvin Evers <marvin.n.evers@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I84da5365907664ce223dec4adb22a8f1a6e2a144
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83188
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Marvin Evers <marvin.n.evers@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
