summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2017-06-04mb/google/poppy: Update camera sensorNaresh G Solanki
Update camera sensor detail to OV 13858 Also update i2c address of OV5670 BUG=None TEST= Build & boot to ChromeOS. Check for both the camera detection. Change-Id: I3b6192815201f605d3ebdb4bf54db26a8e837b35 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/20021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03mb/lenovo/*/cmos: Remove unused option and checksum fixPatrick Rudolph
Fix for all Sandy-Bridge and Ivy-Bridge devices. Remove unused option "hyper_threading". Increase CMOS checksum range to cover all user adjustable settings. Change-Id: I02f7af13d9c82d7f531d4b49b3bc0e5a20c14b55 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-06-03mb/google/fizz: set SD_CDZ to edge trigger.Kane Chen
This is to align with the SD_CD GpioInt setting in acpi BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I40aefcb0f571e7f6773a6d20226f357707aa041a Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/20001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-03soc/intel/skylake: Add macro for setting GPIO interrupt trigger mode.Kane Chen
Currently, there is no macro to set GPIO interrupt trigger mode. The purpose is to make coreboot set same trigger mode as GpioInt BUG=b:62067569 TEST=checked unused interrupt on SD_CD does not happen after s3 resume Change-Id: I42b9cd80b494e24c55b97e54cdf59bfd24dd9054 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/19992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-02sb/intel/bd82x6x: Disable unused bridgesPatrick Rudolph
Disable unused bridges that are not marked as hot-plugable. Reduces idle power consumtion by ~200mWatt for each port. Tested on Lenovo T430. Change-Id: I6ee5e5f33824acdbca0f6ed28e90beab7fe10002 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19818 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02device/device_util: Add function to determine bridge statePatrick Rudolph
Add a method to get the state of a bridge device. Return true if at least one enabled device on the secondary bus is found. Useful to disable non hotplugable bridges without any devices attached. Change-Id: Ic8fe539d233031d4d177b03dd2c03edb5ab8c88d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02Kconfig: Introduce HAVE_(VBE_)LINEAR_FRAMEBUFFERNico Huber
Like HAVE_VGA_TEXT_FRAMEBUFFER, these are selected by graphics drivers that support a linear framebuffer. Some related settings moved to the drivers (i.e. for rockchip/rk3288 and nvidia/tegra124) since they are hardcoded. Change-Id: Iff6dac5a5f61af49456bc6312e7a376def02ab00 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19800 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02intel/bakersport_fsp: Move into bayleybay_fsp as a variantMartin Roth
The separate directory was the old way of handling variant boards. Update bakersport_fsp to the new method. All of the other pieces were already moved into bayleybay_fsp. Change-Id: I5712c1b399570bd7ab7fc9e42af25fbf15a0ba78 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/19077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-06-02arch/arm/include/armv7/arch: Correct keyword organization in cpu.hLogan Carlson
Move the inline keyword in between the static keyword and the return type. Change-Id: Ibacc5ee9fabff7fec2abd5534312cf3ab1bb28cf Signed-off-by: Logan Carlson <logancarlson@google.com> Reviewed-on: https://review.coreboot.org/19991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02arch/arm: Correct checkpatch errorsLogan Carlson
Correct whitespace issues in arch/arm and arch/arm64. Enclose complex values in parenthesis. Change-Id: I74b68f485adff1e6f0fa433e51e12b59ccea654b Signed-off-by: Logan Carlson <logancarlson@google.com> Reviewed-on: https://review.coreboot.org/19989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2017-06-02google/rambi: disable PCI device for unused i2c busesMatt DeVillier
Light sensor isn't used and ACPI already removed, so disable I2C5 bus interface as well. Disable I2C6 for devices without a touchscreen Change-Id: Ib0e041ae9131615ef1140bad064de5aae91f8ee4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19956 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02soc/baytrail: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Iad947ae2cd541d3407455b218c2b352b9a373718 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19973 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02soc/baytrail: add missing USB port defsMatt DeVillier
Add device/address stub for XHCI USB port 7. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Iae874a9ba01e9428e07cf7ff15e663365b2354a9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-06-02soc/broadwell: add missing USB port defsMatt DeVillier
Add device/address stubs for XHCI USB ports 7/8, 10-15. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: Ice86bd226a70bd5996430e7a68a026cc825ba187 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19968 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-06-02mainboard/*/*/Kconfig: Remove MONOTONIC_TIMER_MSR selectionAamir Bohra
Remove MONOTONIC_TIMER_MSR selection from mainboard Konfigs, as it only does a reduntant selection of HAVE_MONOTONIC_TIMER config, already selected under skylake soc Kconfig. Change-Id: Ib3177ceb9e8b6c16ce0e437a4a02b94f215af58f Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/20002 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-06-02mb/intel/d410pt: Add mainboardArthur Heymans
This board is almost identical to D510MO, the only differences are some differences in populated connections, CPU with less L2 cache and a 10/100 Realtek NIC. The vendor uses the very same binary for both D510M0 and D410PT. Change-Id: I220515365b69e785ef249c4e3a9af5f7fddf02f9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/20000 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-02ec/google/chromeec: Fix typo in ECUI deviceDuncan Laurie
The IO region defined for EC_HOST_CMD_REGION1 was incorrectly using EC_HOST_CMD_REGION0 for the range maximum so the region was showing a minimum of 0x880 and a maximum of 0x800. Both min and max should report the same value as this region is fixed and cannot be relocated by the OS. Change-Id: I387b1c36aa115e03d0c6f9939eb13c93b14ad909 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-02sb/intel/bd82x6x/early_usb: Use register namePatrick Rudolph
Use register name instead of magic value. Change-Id: I4f2f3f196c12489613333ab9f6098443edda927f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-01src/include/device: Add System Agent (SA) device idsSubrata Banik
Change-Id: Iddc9f8187d1ff4a51bf3bf42a266b79007c42f3b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01soc/intel/apollolake: Use MCH_BASE_ADDRESS macro for APLSubrata Banik
Systemagent common code will use MCH_BASE_ADDRESS macro, hence cleaning current APL code to adhere such changes. Change-Id: Iace1cf786b08221c3955101186509ac5161c3841 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/19793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-06-01soc/intel/apollolake: Remove soc/pci_ids dependencyHannah Williams
and add pci ids for GLK and APL from device/pci_ids.h Change-Id: If8101fe52591b09caadfe104ca8daab4258837c7 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19999 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-01include/device: Add pci ids for Intel SDBora Guvendik
Change-Id: Iee966991ffd0f73cee9520c85eeba6530e224457 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/19997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-06-01mainboard/google/poppy: Enable H1 I2C TPMFurquan Shaikh
Enable H1 I2C TPM in Kconfig and devicetree for poppy. CQ-DEPEND=CL:513513,CL:*381534 BUG=b:36265511 BRANCH=None TEST=Compiles successfully. Change-Id: I4c6c94fa05abf9f5374505ded5956e879ac79726 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicolas Boichat <drinkcat@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31mainboard/google/poppy: Power down camera rails when suspendingFurquan Shaikh
BUG=b:62147763 Change-Id: Iba88fed972b847448e01fcfca8c7129d950244c2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-31google/slippy: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Each slippy variant has slightly different USB port config; data for falco and leon to be added once available Change-Id: Icc3b5b1161f62ac0b840380679acafeff363cf45 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/beltino: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. All beltino variants use the exact same USB port layout. Change-Id: If5b540949ea071f7165876e12ac1ef50e62d2b22 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31sb/lynxpoint: add missing USB port defsMatt DeVillier
Add device/address stubs for XHCI USB ports 7, 10-13. Stub data will be supplemented by board-specific info added in subsequent commits. Change-Id: I7d2f93351435cccd62e8fe4d95ad3467aa09de69 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19965 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-31sb/lynxpoint: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: If63d5637a0469eeace0d935cca961e8d04fdfb1a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31google/parrot: add board-specific USB port infoMatt DeVillier
Add capability and location data for USB ports/devices via _PLD and _UPC ACPI methods, which is utilized by Windows and required by macOS. Move inclusion of mainboard.asl after southbridge asl files so scopes referenced in usb.asl are valid. Change-Id: I58ea0b43f7f2c2692630df3bdb06af92566c1202 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31sb/bd82x6x: add ACPI method to generate USB port infoMatt DeVillier
Add ACPI method GPLD to generate port location data when passed visiblity info. Will be used by _PLD method in board-specific USB .asl files. Change-Id: Ib83660d6548112ceb6c75a31e5ce6c4a6041ccfb Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-31mb/lenovo/t430: Fix PCIe hot-plug portsPatrick Rudolph
Port 0 is connected to SD-card reader. Don't mark it as hot-plugable. Change-Id: I5d3d4c7541683a6c09aac47ca251a6dad23ad1ab Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-31mc_tcu3: Remove all hwinfo files from mainboard directoryWerner Zeh
To unify the hwinfo handling along all Siemens MC boards the hwinfo files have to be removed from the mainboard directory. They will be added to cbfs in site-local/Makefile.inc. Change-Id: Ia3dcb2e0118527b37aed872740273c4fa7004aef Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31mc_bdx1: Switch to RTC RX6110SAWerner Zeh
The prior used RTC PCF8523 is replaced with RX6110SA on this mainboard. Switch to the new RTC in Kconfig and adapt devicetree to the new chip. Change-Id: I7c4911191cae254900f9a958da42ecd18497484c Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-05-31rx6110sa: Add possibility to use both I2C and SMBus for the RTCWerner Zeh
The driver for the RTC RX6110SA is designed to be used with I2C bus. This patch adds the possibility to use SMBus operations to access the RTC. For this purpose the Kconfig switch RX6110SA_USE_SMBUS is added. It is not enabled per default so that I2C will be used. One can set this switch on board level to use SMBus instead. Change-Id: I4827ae2c544e8002399d94a1159acacd8176c5e9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/19978 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-31mb/google/eve: Update thermal tuning parametersDuncan Laurie
Modify the DPTF configuration on Eve to relax the severe throttling that is currently applied and allow performance testing to see better results. BUG=b:35581264 TEST=performance tests show better results and thermal tests still pass. Change-Id: I0838f4ec3026bc8bac814698043fa97cf6772cb4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-31mb/google/eve: Add power controls to touchscreen deviceDuncan Laurie
Instead of having the SMI handler power off the touchscreen on the way into suspend add power resource controls to the ACPI device so the power is managed by the kernel instead of the BIOS. BUG=b:35581264 TEST=manual testing on Eve to ensure that the touchscreen is still functional at boot and after suspend/resume, and that it does not draw power in suspend. Change-Id: Id9a98807d24bbc7dff32408f3d113f6fad5bc023 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/19946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30arch: Unify basic cache clearing APIJulius Werner
Caching is a very architecture-specific thing, but most architectures have a cache in general. Therefore it can be useful to have a generic architecture-independent API to perform simple cache management tasks from common code. We have already standardized on the dcache_clean/invalidate naming scheme that originally comes from ARM in libpayload, so let's just do the same for coreboot. Unlike libpayload, there are other things than just DMA coherency we may want to achieve with those functions, so actually implement them for real even on architectures with cache-snooping DMA like x86. (In the future, we may find applications like this in libpayload as well and should probably rethink the API there... maybe move the current functionality to a separate dma_map/unmap API instead. But that's beyond scope of this patch.) Change-Id: I2c1723a287f76cd4118ef38a445339840601aeea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30arch/x86: Add function to determine if we're currently running from CARJulius Werner
This patch adds a simple function that can be used to check if CAR_GLOBALs are currently being read from CAR or from DRAM. Change-Id: Ib7ad0896a691ef6e89e622b985417fedc43579c1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30tegra210: Remove fake cpu_reset()Julius Werner
The Tegra210 SoC never had a proper cpu_reset() implementation, so it's pointless to pretend there is one. Most ARM SoCs/boards only define hard_reset() at the moment anyway, so let's stick with that. Change-Id: I40f39921fa99d6dfabf818e7abe7a5732341cf4f Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-30arm64: Align cache maintenance code with libpayload and ARM32Julius Werner
coreboot and libpayload currently use completely different code to perform a full cache flush on ARM64, with even different function names. The libpayload code is closely inspired by the ARM32 version, so for the sake of overall consistency let's sync coreboot to that. Also align a few other cache management details to work the same way as the corresponding ARM32 parts (such as only flushing but not invalidating the data cache after loading a new stage, which may have a small performance benefit). Change-Id: I9e05b425eeeaa27a447b37f98c0928fed3f74340 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-30lib/edid: Split out fill_lb_framebuffer()Nico Huber
Place it into new edid_fill_fb.c, and invert the logic of the Kconfig guard (NATIVE_VGA_INIT_USE_EDID is now !NO_EDID_FILL_FB). It has to be selected by all drivers that use MAINBOARD_DO_NATIVE_VGA_INIT but pro- vide their own fill_lb_framebuffer() implementation. Change-Id: I90634b835bd8e2d150b1c714328a5b2774d891bd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-30binaryPI: Move EmptyHeap() callKyösti Mälkki
Specification says to do CAR teardown as part of AmdInitPost(). Move initializing the final AGESA heap storage to AmdInitEnv() so that its work is not lost even if AMD_DISABLE_STACK does invalidation without writeback. Change-Id: Icf0ec74c390e60122d0b312b5f09f46bb930e085 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-29gma/acpi: Fix argument count to _DSSMatt DeVillier
As the comment above the change indicates, and per ACPI spec, _DSS has one argument. Change-Id: Ic05832d412cd0c89ed3a275c4db694a9118dac28 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/19952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-27Kconfig: Move CONFIG_VIDEO_MBNico Huber
Via/VX800 was the last chip not defining it. Change-Id: Idd03f48bed881a5846b1bb3bf29254450d6cff3b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19748 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-27mb/lenovo/*/smihandler: Get rid of mainboard_io_trap_handlerPatrick Rudolph
Get rid of mainboard_io_trap_handler. The only purpose is to enable tp-smapi, but is already done on all boards in h8_enable, as of devicetree setting config0. Change-Id: I33fd829a7e34aefa8f76ca6020cc8e802f7aab17 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-27lib/spd_bin: make SMBus SPD addresses an inputAaron Durbin
Instead of assuming the mapping of dimm number to SPD SMBus address, allow the mainboard to provide its own mapping. That way, global resources of empty SPD contents aren't wasted in order to address a dimm on a mainboard that doesn't meet the current assumption. Change-Id: Id0e79231dc2303373badaae003038a1ac06a5635 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2017-05-27google/fizz: Set GPP_C2 to NCShelley Chen
GPP_C2 is being used as strapping option, so should not be set to NF. Signal was floating previously, which can lead to an assertion of smbalert#. BUG=b:37681121, b:35775024 BRANCH=None TEST=powerd_dbus_suspend and ensure stays in suspend Change-Id: I68091206014621419b886b723a5681541be989bc Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/19904 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-27CBMEM: Clarify CBMEM_TOP_BACKUP function usageKyösti Mälkki
The deprecated LATE_CBMEM_INIT function is renamed: set_top_of_ram -> set_late_cbmem_top Obscure term top_of_ram is replaced: backup_top_of_ram -> backup_top_of_low_cacheable get_top_of_ram -> restore_top_of_low_cacheable New function that always resolves to CBMEM top boundary, with or without SMM, is named restore_cbmem_top(). Change-Id: I61d20f94840ad61e9fd55976e5aa8c27040b8fb7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/19377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-27soc/intel/skylake: Add detailed information about PME wake sourcesFurquan Shaikh
Add more fine-grained details about what device caused the PME wake event. This requires checking the PME status bit (bit 15) in PCI PM control and status register for the PCI device. BUG=b:37088992 TEST=Verifed that XHCI wake source was identified correctly: 135 | 2017-05-25 15:28:17 | ACPI Enter | S3 136 | 2017-05-25 15:28:26 | ACPI Wake | S3 137 | 2017-05-25 15:28:26 | Wake Source | PME - XHCI | 0 Change-Id: I6fc6284cd04db311f1f86b8a86d0bb708392e5d5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19925 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-27soc/intel/skylake: Add missing PCH_DEV_PCIE* definitionsFurquan Shaikh
This is required to add wake sources for PCIE PME events. BUG=b:37088992 Change-Id: Ideecdf133908b0819d7d993e1c7df1a6578cb77d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-27elog: Add more wake sourcesFurquan Shaikh
Add wake sources for PME events generated by different devices. BUG=b:37088992 Change-Id: I25098f489f401148171c235cb341f6e7bb2b635b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-26rockchip/rk3399: fix rk_mipi_dsi_phy_init errNickey Yang
This patch fix rk_mipi_dsi_phy_init error return. Change-Id: Ie260975ad6ed26c37aa8bb65dfcef4db2407a2da Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Reviewed-on: https://review.coreboot.org/19903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-26mainboard/google/poppy: Add PowerResource for touchscreen deviceFurquan Shaikh
1. Do not enable touchscreen device by default in gpio configuration. 2. Select use of PowerResource for touchscreen device in devicetree so that the ACPI subsystem can take care of powering on/off the device. When system enters suspend, touchscreen device is powered off and on resume, it is powered back on. BUG=b:62028489 TEST=Verified 100 cycles of suspend-resume. Touchscreen still works on poppy. Change-Id: Ia0bebc7259b10cc60a9fa5b53542dfdd9685663e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19829 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-25soc/intel/skylake: Implement GPIO ACPI AML generating functionsFurquan Shaikh
Implement GPIO ACPI AML generating functions that can be called by coreboot drivers to generate GPIO manipulation code in AML. Following API functions are implemented: 1. acpigen_soc_read_rx_gpio 2. acpigen_soc_get_tx_gpio 3. acpigen_soc_set_tx_gpio 4. acpigen_soc_clear_tx_gpio In addition to the API functions above, helper functions are added to gpio.asl to set/clear/get Tx value of GPIO. BUG=b:62028489 Change-Id: I77e5d0decd8929a922d06b02312378f092551667 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19828 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-25mb/lenovo/*60: Remove not existing DIMMs from SPD mapArthur Heymans
Should result in a tiny speed bump in raminit since those addresses are not checked for present DIMMs. Checked in schematics of both Thinkpad X60 and T60 and tested to configure raminit correctly for all DIMMs populated on X60. Change-Id: I56c4f3176541bc75a8de3aac9f87526a77fc819b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-25mb/lenovo/x200/blc: Add LTD121EQ3B panel at 447HzNico Huber
Change-Id: Ia44097f32f74ffd749219415984224ce33d9252b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-25mainboard/google/eve: Update VR config settingsV Sowmya
Update Psi2Threshold, IccMax, AcLoadline, DcLoadline VR config settings as per board design. BUG=b:38415991 BRANCH=none TEST=Build and boot eve. Change-Id: I274245821f68fb3151e5563ea0c75eaa1ad32c08 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/19826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-05-24rk3399: Reshuffle memlayout to move PRERAM_CBMEM_CONSOLE further backJulius Werner
It seems that the BootROM on the RK3399 overwrites some of the earlier parts of SRAM, including the PRERAM_CBMEM_CONSOLE area. Now that we have a persistent CBMEM console we want that area to survive in case of an early (pre-CBMEM) reboot, so shuffle the layout around a bit to move it further back. (This reduces the stack size to 12KB which should still be way more than enough.) Change-Id: Ifc1e568cda334394134bba9eba75088032d2ff13 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-24mb/google/soraka: Update camera sensor for sorakaNaresh G Solanki
Soraka uses OV 13858 sensor. Hence update the same. Change-Id: I4dd39a25da47e379cca3f8748250b3ce1ff61e50 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-24nb/intel/x4x/raminit: Initialise async variableArthur Heymans
It could end up not initialized which causes it not to build with clang. Change-Id: I3be9477d836123aaa87c9bebb41c1ec34689a771 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19736 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-24mb/google/poppy: Update SPD dataNaresh G Solanki
Though SPD is rightly selected (i.e., H9CCNNNBKTALBR-NUD), it displays wrong part number during boot in coreboot logs. So correct part number info within the SPD. TEST= Build for Soraka & make sure part number is rightly printed. Change-Id: I67f676fb6ee9d685fa7aa41fdc4b00355e6d33c7 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/19692 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24drivers/spi/spi-generic: Make spi_setup_slave strong symbolFurquan Shaikh
Now that all platforms are updated to provide spi bus map, there is no need to keep the spi_setup_slave as a weak symbol. BUG=b:38430839 Change-Id: I59b9bbb5303dad7ce062958a0ab8dee49a4ec1e0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19781 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24soc/marvell/armada38x: Remove unused SoC armada38xFurquan Shaikh
No mainboard is actually using this SoC. Remove the code for this SoC for now. BUG=b:38430839 Change-Id: Ia35986dffda8bbd76305ef5abab6ae81cc154b0f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19824 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-24southbridge/amd: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I2a789cff40fb0e6bd6d84565531d847afb3f8bed Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24southbridge/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I23c1108c85532b7346ff7e0adb0ac90dbf2bb2cc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/intel: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Id3f05a2ea6eb5e31ca607861973d96b507208115 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/samsung/exynos5420: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ic937cbf93b87f5e43f7d70140b47fa97bcd7757e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/qualcomm/ipq*: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I6cc8c339e008e16449fa143c1d21e23534bdaf0b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19776 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24soc/broadcom/cygnus: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I48b242dd6226e392ed0f403051843b3ae02cd9a4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/imgtec/pistachio: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ie4ec74fccaf25900537ccd5c146bb0a333a2754c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-24soc/rockchip: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I66b1b9635ece2381f62f2a9d6f5744d639d59163 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/mediatek/mt8173: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: Ib0d6e4e8185ce1285b671af5ebcead1d42e049bc Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2017-05-24soc/nvidia/tegra*: Move spi driver to use spi_bus_mapFurquan Shaikh
This is in preparation to get rid of the strong spi_setup_slave implemented by different platforms. BUG=b:38430839 Change-Id: I873b96d286655a814554bfd89f899ee87302b06d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-24soc/marvell/bg4cd: remove cosmos mainboard and bg4cd socAaron Durbin
The SoC code was never completed. It's just a skeleton that gets in the way of refactoring other code. Likewise, the mainboard was never completed either. Just remove them both. Change-Id: I8faaa9bb1b90ad2936dcdbaf2882651ebba6630c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19823 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-23sb/intel/common: Add common EC fw supportLijian Zhao
Add support to the Intel common firmware Kconfig and Makefile.inc to allow the embedded controller (EC) blob to be added to the final binary through ifdtool. TEST=Add ec.bin and enable in config, build is successful. Change-Id: Ib14732b4d263dde4770bf26b055c005de2540338 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/19719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/skylake: Display FPF status of CSMEPratik Prajapati
Field Programmable Fuses (FPF) status maintained by CSME in bits 30:31 of FWSTS6 for Skylake and Kabylake. FPF committed means CSME has blown the fuses. Change-Id: If63c7874e6c894749df8100426faca0ad432384b Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/19747 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common/block/uart: Add GLK UART pci idsHannah Williams
Change-Id: I08dd7a8c0d42d4ec7c6ff65a82553fe1efbcc424 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19687 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22soc/intel/common/block: Add GLK I2C PCI IDsRavi Sarawadi
Add GLK PCI IDs for I2C to use common I2C code. Change-Id: I2144199345e6382984c367f6a77f0cbb0a93daea Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/19782 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22include/device: Add pci ids for Intel GLKHannah Williams
Change-Id: Ifbca20a0c38cc1fb8ee4b4e336d59e834fcaf57a Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/19686 Reviewed-by: Brenton Dong <brenton.m.dong@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-05-22soc/intel/skylake: Add entry for deep Sx wakeFurquan Shaikh
If deep Sx is enabled and prev sleep state was not S0, then if SUS power was lost, it means that the platform had entered deep Sx. Add an elog entry for deep Sx variant in this case. BUG=b:38436041 TEST=Verified that elog entries are updated correctly: Deep S5: 59 | 2017-05-19 10:39:08 | Kernel Event | Clean Shutdown 60 | 2017-05-19 10:39:09 | ACPI Enter | S5 61 | 2017-05-19 10:39:17 | System boot | 22 62 | 2017-05-19 10:39:17 | EC Event | Power Button 63 | 2017-05-19 10:39:17 | ACPI Deep Sx Wake | S5 64 | 2017-05-19 10:39:17 | Wake Source | Power Button | 0 65 | 2017-05-19 10:39:17 | Chrome OS Developer Mode Deep S3: 66 | 2017-05-19 10:40:11 | ACPI Enter | S3 67 | 2017-05-19 10:40:16 | EC Event | Power Button 68 | 2017-05-19 10:40:16 | ACPI Deep Sx Wake | S3 69 | 2017-05-19 10:40:16 | Wake Source | Power Button | 0 Normal S3: 77 | 2017-05-19 10:43:22 | ACPI Enter | S3 78 | 2017-05-19 10:43:39 | EC Event | Power Button 79 | 2017-05-19 10:43:39 | ACPI Wake | S3 80 | 2017-05-19 10:43:39 | Wake Source | Power Button | 0 Change-Id: Ia251334ae44668c2260d8d2e816f85f1f62faac4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22elog: Add a new elog type for deep Sx variantFurquan Shaikh
This is useful for debugging based on eventlog to identify if platform entered normal or deep Sx. BUG=b:38436041 Change-Id: Ic7d8e5b8aafc07aed385fe3c4831ab7d29e1f890 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/19797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-22soc/intel/skylake: Use Intel SATA common codeAamir Bohra
Use SATA common code from soc/intel/common/block/sata and clean up code. Change-Id: Ib5d65f1afda6b2f8098f1c006623a48cf2690593 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel SATA common code supportAamir Bohra
Add SATA code support in intel/common/block to initilalize SATA controller, allocate resources and configure SATA port status. Change-Id: I42ec0059f7e311a232c38fef6a2e050a3e2c0ad3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/skylake: Use Intel PCIe common codeAamir Bohra
Change-Id: Ia9fa22c30fffb1907320667ac37f55db9f3cb7b3 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22soc/intel/common: Add Intel PCIe common codeAamir Bohra
Add PCIe code support under soc/intel/common/block to initialize PCIe controller, allocate resources and configure L1 substate latency. Change-Id: I0c374317a3fe0be0bb1c5d9b16fcbc5cad83ca42 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/19665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22Kconfig: Move and clean up CONFIG_VGANico Huber
Change-Id: I6e710b95cade0ea68f787f33c0070613d64b6da6 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-05-22include/console: Use IS_ENABLED() macroNico Huber
Change-Id: I3d0c61c37399e96c1d154c1d3af5c47db967a07a Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19763 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22device/oprom/include: Use IS_ENABLED() macroNico Huber
Change-Id: Ibc3bf2f4f1e1bf1ffe9632aa150d549fcd6c201d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19762 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22arch/x86/include: Use IS_ENABLED() macroNico Huber
Change-Id: I0f9a92e595ec765d47f89f0023ff69636ee406af Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19761 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-05-22drivers/intel/gma: Drop unused INTEL_DPNico Huber
Change-Id: I786848cd48c6fcfecf9b72c60623cadcfcbb7db7 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22nb/intel/haswell: Fix up C NGI remnantsNico Huber
Change-Id: I3cd5e99b9954a68837de85b49b4389b668e00cf4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22mb/intel/wtm2: Drop unsupported native graphics initNico Huber
Since the conversion of this board to soc/broadwell in 0aa06cbf18 (wtm2: Convert to use soc/intel/broadwell), the NGI for this board is not hooked up anywhere. Also, the code doesn't compile anymore. Change-Id: I6387203349b78c8e95333eaf44b345aa30eac7c5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-22sb/via/k8t890: Clean up CONFIG_VGA usageNico Huber
Remove guards and let the linker take care of it. Change-Id: I96ad8002845082816153ca5762543768998a5619 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/19744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-05-22nb/intel/x4x: Use a struct for dll settings instead of an arrayArthur Heymans
This makes the code more readable since it avoids messing with two dimensional arrays and needing remember what the indices mean. Also introduces an unused coarse element which is 0 for all default DLL settings on DDR2. Change-Id: I28377d2d15d0e6a0d12545b837d6369e0dc26b92 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2017-05-21mb/lenovo/*/romstage: Remove COM IO portPatrick Rudolph
All those boards do not have a serial port. Don't attempt to decode the COMA/COMB IO range. Change-Id: Ide7e818f87e70e3f559d0769ccde89c35da961d6 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19571 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/lenvovo/*: Clean mainboard.c and devicetreePatrick Rudolph
* Move board specific SPI registers to devicetree * Remove unused headers * Remove obsolete methods * Fix coding style * Fix Thinkpad L520 SPI lvscc register Except for Thinkpad L520, no functional change has been done, just moving stuff around. Change-Id: I692a5632030fe2fedbe9a90f86251000f1360fb2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19494 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21mb/*/romstage: Don't lock ETR3 CF9GR in early romstagePatrick Rudolph
Do not lock ETR3 CF9GR in early romstage. As of Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 this is done in bd82x6x's finalize handler. Change-Id: Iea091511f0d2a6128d3a19e9413090c85e4c2e57 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21sb/intel/bd82x6x/finalize: Lock ETR3 CF9GRPatrick Rudolph
Lock CF9GR as documented in "100-series-chipset-datasheet-vol-2.pdf" Change-Id: I2cb30267a6342db1f3b11715034219ffb18ca678 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/19543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-21nb/intel/x4x: Make raminit less verbose with CONFIG_DEBUG_RAM_SETUPArthur Heymans
Hides JEDEC steps using the RAM_SPEW macro. Also hides a hexdump of SPDs. Change-Id: Ie2b484cf1f1d296823df0473e852d9d07ca20246 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 06:15:32 +0000