summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-04-10arm64: psci: actually inform SoC layer of CPU_ON entryAaron Durbin
2015-04-10google/rush_ryu: Remove long delay when turning on AVDD_DSI_CSIJimmy Zhang
2015-04-10tegra132: Increase size of bootblock due to overflowTom Warren
2015-04-10arm64: ensure secondary CPU's stack tops are not in the cacheAaron Durbin
2015-04-10arm64: add timeout waiting for CPUs to come onlineAaron Durbin
2015-04-10tegra132: always bring up PLLDAaron Durbin
2015-04-10tegra132: rename clock_display() to clock_configure_plld()Aaron Durbin
2015-04-10google/rush_ryu: audio: Setup clocks for AHUB, I2S1, codec, etc.Tom Warren
2015-04-10tegra132: Set dc to resize the difference between framebuffer and panelJimmy Zhang
2015-04-10google/rush_ryu: devicetree: Add framebuffer resolution settingsJimmy Zhang
2015-04-10tegra132: Add framebuffer parametersJimmy Zhang
2015-04-10tegra132: Pass panel spec to lib_sysinfoJimmy Zhang
2015-04-10tegra132: Expand ramstage size to 208k (from 192k)Jimmy Zhang
2015-04-10tegra132: Add dsi driverJimmy Zhang
2015-04-10google/rush_ryu: devicetree: Add dsi panel mode settingsJimmy Zhang
2015-04-10tegra132: Add panel mode specJimmy Zhang
2015-04-10google/rush_ryu: dsi: Enable panel related vdd and clocksJimmy Zhang
2015-04-10google/rush_ryu: Disable EC SW sync for proto boards before proto3Furquan Shaikh
2015-04-10tegra132: Increase space for romstage in memlayoutFurquan Shaikh
2015-04-10urara: support building with CHROMEOS enabledVadim Bendebury
2015-04-10baytrail: correct NC pin to GPO pin according to BYT platform design guideKane Chen
2015-04-10samus: Log EC panics to eventlogShawn Nematbakhsh
2015-04-10cros_ec: Retry failed VBNV transactionsJulius Werner
2015-04-10samus: Enable vr_slow_rampShawn Nematbakhsh
2015-04-10x86: Support reset routines in bootblockLee Leahy
2015-04-10broadwell: Correct XHCI offset for USB 3.0 portsJulius Werner
2015-04-10broadwell: Set PCIe replay timeout to 0xDDuncan Laurie
2015-04-10samus: Use codec internal 1.8V as DACREF sourceBen Zhang
2015-04-10samus: Set MICBIAS1 to 2.970VBen Zhang
2015-04-10baytrail: add code for supporting 2x ddr refresh rateKane Chen
2015-04-10broadwell: Add configuration for tuning VR for C-state operationsDuncan Laurie
2015-04-10samus: Adjust SATA Gen3 TX voltage amplitudeDuncan Laurie
2015-04-10broadwell: Preserve VbNv around cmos_initDuncan Laurie
2015-04-10broadwell: Add function to apply PRR to a range of SPI flashDuncan Laurie
2015-04-10samus: Add clear_recovery_mode_switch functionDuncan Laurie
2015-04-10samus: Set current backlight PWM valueDuncan Laurie
2015-04-10broadwell: Turn off panel backlight in S5 SMI handlerDuncan Laurie
2015-04-10broadwell: Skip steps when disabling PCIe portDuncan Laurie
2015-04-10broadwell: Remove XHCI workarounds on WPTDuncan Laurie
2015-04-10broadwell: Only do pre-graphics delay when running option romDuncan Laurie
2015-04-10PCI - Add interrupt disable bit definitionLee Leahy
2015-04-10samus: Add ACPI binding for rt5677 codec SPIBen Zhang
2015-04-10broadwell: Fix PCIe ports programming sequences to enable HSIOPCWenkai Du
2015-04-10samus: Add RT5677 ACPI/DT bindings with _DSDDuncan Laurie
2015-04-10broadwell: Update SATA Gen3 TX adjustment registersDuncan Laurie
2015-04-10broadwell: Add a few bits to finalize stepDuncan Laurie
2015-04-10baytrail: fix the coding error on PCIe L1 exit latencyKevin L Lee
2015-04-10TPM: Reduce buffer size to fix stack overflowJulius Werner
2015-04-10Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 msKevin Hsieh
2015-04-10tpm: Remove error message for unknown resource typeDuncan Laurie
2015-04-10Broadwell: Set boot_mode of pei_data before running reference codeKenji Chen
2015-04-10samus: Move board version to a separate fileDuncan Laurie
2015-04-10tpm: Add ramstage driver and interrupt configurationDuncan Laurie
2015-04-10tpm: Move the LPC TPM driver to a subdirectoryDuncan Laurie
2015-04-10broadwell: Increase I2C SDA hold timing to 300nsChiranjeevi Rapolu
2015-04-10broadwell: add RCBA posting read after writingWenkai Du
2015-04-10Broadwell: Synchronization with FRC for Root Port Power ManagementKenji Chen
2015-04-10broadwell: Skip DDI-A enable in S3 resumeDuncan Laurie
2015-04-10broadwell: Add support for ACPI \_GPE._SWSDuncan Laurie
2015-04-10baytrail: Switch from ACPI mode to PCI mode for legacy supportMarc Jones
2015-04-10southbridge/intel/fsp_rangeley/ : Spellcheck + Formattingnicky sielicki
2015-04-10vboot: Remove unused 2lib header pathRandall Spangler
2015-04-10vboot: Include vb2_api.h, instead of lower-level vboot2 header filesRandall Spangler
2015-04-10vboot2: Reduce minimum required work buffer sizeJulius Werner
2015-04-10vboot: add physical recovery switch supportDaisuke Nojiri
2015-04-10vboot2: update fw_version_tpm when creating vboot1 shared dataDaisuke Nojiri
2015-04-10ramoops: Add support for passing ramoops region through cb tables.Furquan Shaikh
2015-04-10chromeos: Add correct dependency on HAVE_ACPI_TABLES for gvns and ramoops.Furquan Shaikh
2015-04-10vboot: reduce references to parent's files in MakefilesDaisuke Nojiri
2015-04-10vboot: fix invalid check for the returned value from spi_flash->writeDaisuke Nojiri
2015-04-10cbtables: Add RAM config informationDavid Hendricks
2015-04-10vboot: adding VBSD_BOOT_FIRMWARE_WP_ENABLED logicGediminas Ramanauskas
2015-04-10fmap: use CBFS for all other than x86 platformsVadim Bendebury
2015-04-10chromeos: Add a function to copy VPD WiFi calibration data to CBMEMVadim Bendebury
2015-04-10vboot: move vboot files to designated directoryDaisuke Nojiri
2015-04-10build system: Fix SeaBIOS integration with multilib compilersPatrick Georgi
2015-04-10mainboard/biostar: Add support for Biostar AM1ML ver7.xSergej Ivanov
2015-04-10vendorcode/amd/agesa/f16kb: Enable support for AM1 socketSergej Ivanov
2015-04-10southbridge/amd/agesa/hudson: Fix LPC_DEV definitionSergej Ivanov
2015-04-10google/cosmos: don't enable CHROMEOS by defaultPatrick Georgi
2015-04-10ipq806x: Remove extra INCLUDESPatrick Georgi
2015-04-10google/rush: Add I2C1 init and audio clock enable/resetsTom Warren
2015-04-10tegra132: Add routine to enable all audio periphs under AHUBTom Warren
2015-04-10tegra132: Add I2C1 support to funitTom Warren
2015-04-10google/rush_ryu: Add support for event logFurquan Shaikh
2015-04-10rtc: Add an RTC driver for the TI TPS65913 PMIC.Furquan Shaikh
2015-04-10elog: Hide elog_flash_offset_to_address() from SMMFurquan Shaikh
2015-04-10elog: Fix typecast issues related to 64-bit compilation.Furquan Shaikh
2015-04-10arm64: Implement PSCI command supportAaron Durbin
2015-04-10arm64: secmon: add entry point for turned on CPUsAaron Durbin
2015-04-10ryu: Add display_start apiJimmy Zhang
2015-04-10ryu: Enhance pmic access functionsJimmy Zhang
2015-04-10ryu: audio: Enable RT5677 audio codecTom Warren
2015-04-10ryu: Select pwr btn polarity based on board idFurquan Shaikh
2015-04-10gpio: compile gpio.c at all stagesDavid Hendricks
2015-04-10marvell/bg4cd: add gpio.h to fix broken buildDaisuke Nojiri
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: add a function to read GPIO array as base-2 valueDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10rk3288: Adjust CBFS header and ROM offsetsJulius Werner
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 14:28:36 +0000