| Age | Commit message (Collapse) | Author |
|---|
|
commit d078ef2152052b5ce8686249dcd05ebd50010889
("soc/intel/cmn/block/pmc: Add previous sleep state strings in log")
used SLP_TYP numbers to map ACPI sleep state value. This incorrectly
printed wrong string for prev_sleep_state during S5.
ex: after a cold reset the previous sleep state printed was
[DEBUG] prev_sleep_state 5 (S3)
This patch corrects this by using ACPI sleep state numbers for mapping
the prev_sleep_state values.
TEST=test the logs on google/rex board after cold reset
[DEBUG] prev_sleep_state 5 (S5)
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: I9bcdacc4d01a8d827a6abdf9af2b9e5d686ed847
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80144
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Issue: System hang occurred due to unhandled SPI synchronous SMI,
triggered by LOCK_ENABLE bit and WPD assertion.
Solution: Enabled SOC_INTEL_COMMON_BLOCK_SMM_TCO_ENABLE configuration
to allow the system to handle and clear SPI synchronous SMI.
BUG=b:306267652
TEST=Cold reboot test on 20 google/screebo by ODM, all passed w/o
hang.
Change-Id: Ie1f096f8eda4adcf1627e44afa517b02adddad76
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Id23a291af20473c3b3e67178b66fcde920d49984
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
WLAN has always been pcie_rp5, there is nothing on pcie_rp1. RP5 gets
promoted to function 0 (RP1's function) since no earlier functions are
enabled.
This simplifies later refactoring that will handle the FSP root port
enable flags (which were correctly set already) using the device tree
enables.
Test: Boot librem_13v2 and verify WLAN is enabled.
Change-Id: I7a724a01b5f171a16de83ff6122630e2d66557c1
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic8236db7ac80275a65020b7e7a9acce8314c831c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since the romstage code is very similar between all AMD non-CAR SoCs,
factor out a common romstage implementation. All SoCs that select
SOC_AMD_COMMON_BLOCK_PM_CHIPSET_STATE_SAVE call fill_chipset_state, so
this Kconfig option can be used to determine whether to make that call.
In the FSP case, amd_fsp_early_init gets called, while in the case of an
implementation that doesn't rely on an FSP to do the initialization,
cbmem_initialize_empty gets called to set up CBMEM which otherwise would
be done inside the FSP driver code. Since only some SoCs call
fch_disable_legacy_dma_io again in romstage right after
amd_fsp_early_init, introduce the new
SOC_AMD_COMMON_ROMSTAGE_LEGACY_DMA_FIXUP Kconfig option, so that the
SoCs can specify if this call is needed or not.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4a0695714ba08b13a58b12a490da50cb7f5a1ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80083
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Move the call into the FSP code to a file in the common AMD FSP code to
isolate the FSP-specific parts of the code and a preparation to make the
romstage of all non-CAR AMD SoCs common. Without isolating the call into
the FSP-M code, building the common romstage would fail for genoa_poc
due to fsp/api.h not being in the include path.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I30cf1bee2ec1a507dc8e61eaf44067663e2505ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
fsp_m_params.c and fsp_s_params.c only contain FSP-specific code, so
only add those to the build if the SOC_AMD_PHOENIX_FSP Kconfig option is
selected. Other files have FSP-specific parts too, but those will be
reworked in future patches.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ife38ca6a548d7c3c2e765d9c9f30e0a4057bb373
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79984
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Split the SOC_AMD_PHOENIX Kconfig option into SOC_AMD_PHOENIX_BASE that
selects the non-FSP-specific options and SOC_AMD_PHOENIX_FSP that
selects both SOC_AMD_PHOENIX_BASE and the FSP-specific options. This
will help to separate the FSP-specific from the FSP-agnostic code. The
mainboards using this SoC now select SOC_AMD_PHOENIX_FSP instead of
SOC_AMD_PHOENIX.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5e95fbfd9d16930ba3e6cc497557d61adba5a6fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79983
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG
for WIFI to choose the right wifi_sar hex file. Below is the file
mapping:
wifi_sar_0.hex = wifi6
wifi_sar_1.hex = wifi7
BUG=b:319302319
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
Change-Id: I212c80412141e7770a512bd8ccf4111963bab395
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80085
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This options should not be visible on !Intel, !ACPI and !USB4.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ia515d52baead9e151533278c33fda9436ee56168
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79669
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all devicetrees from hp/snb_ivb_desktops are using the reference
names for PCI devices now, remove the equivalent comments documenting
their function.
Change-Id: I0974052c6c18f54b588d296c5c5d11e930f0fcd7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80047
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I31e348ba5954bc463f43e769ddb4aed413faf193
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from lenovo/x230 are using the reference names for
PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: Ia06f976ef1439377ff22149044feaa3463d2aeb8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79964
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from lenovo/t430 are using the reference names for
PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: I84f432e89c41a02115715f7f1b56123dd0d81171
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from lenovo/t530 are using the reference names for
PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: I5ba08843506bc22136aea42ac37936a4f5cad5ce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: Ic3a4c85ec6bfdc858f9b6f79b114cf612ad3a153
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80022
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: I87cec9026bcb621ceb7eae51f65ae35bc31d584a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80056
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: Id592241a1dc33559115800da10a57a5fc10867f9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: I76ec42fccfa42bbe3943e048968a76eec3584ee8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Since all devicetrees from dell/snb_ivb_workstation are using the
reference names for PCI devices now, remove the equivalent comments
documenting their function.
Change-Id: Iac70aa25dd324e1ed5fa0bb995eb995ec3545715
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80053
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Change-Id: I9c6d931d5d5650eb5818116050f9f599a815c315
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80052
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: Ia004de6606a1685822d5567123887c60d89e3119
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Primus4es board is no longer supported thus drop it from the tree.
TEST=Build all Brya boards in CrOS-SDK - Primus4ES not built. No negative impact observed.
Change-Id: I0502b2eed6f80d648b422c8d1622d504a6c93822
Signed-off-by: Jakub Czapiga <czapiga@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I8f6752e887af8c1ceba56153e3da864abd040ffa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79947
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds an opensbi linker macro for easier integration into
memlayout.ld linker scripts.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I4f138de685c6bfb3cdbf79d63787eb0c5aab8590
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77974
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Describe the FW_CONFIG probe for the settings for Palutena.
- WIFI_SAR_ID_0 for AW Wi-Fi module AW-CM421NF
- WIFI_SAR_ID_1 for Intel Wi-Fi module AX211NGW
2. In contrast to the AW Wi-Fi module, the Intel Wi-Fi module needs
to load a SAR table in dedede platform.
3. For Palutena project, the SKU ID segment of Palutena is set for
"0x350000~0x35FFFF".
BUG=b:319792428
BRANCH=firmware-dedede-13606.B
TEST=build pass
Change-Id: Ic4f38928d24c4398d90df226cfe0788a30075bf2
Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79930
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
|
|
Add 6w and 15w fan performance control.
BUG=b:318454915
TEST=emerge-nissa coreboot chromeos-bootimage
Thermal team test pass.
Change-Id: If21baa2f6f9bcd527cec2bced27c5fb2cd607830
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79988
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Modify 6w/15w DPTF parameters based on b:290705146#comment41.
2. 6W MSR power limit_1 power (Watts) increase to 20.
3. 15W MSR power limit_1 power (Watts) increase to 20.
BUG=b:290705146
TEST=emerge-nissa coreboot chromeos-bootimage
Thermal team test pass.
Change-Id: I15fa4b8f7c7088ff56da6493659ae45572913b5a
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
LAPIC devices in devicetree is not possible any longer since commit
3eba665 "util/sconfig: Remove lapic devices from devicetree parsers".
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I02192c9a11c35d9625837a8a9f3ba798ff0ae611
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78329
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Work around a romstage restriction. Globals (or static variables) cannot
be initialized to a non-zero value because there's no data section. Note
that the revision ID for stepping A0 is zero, so `pch_silicon_revision`
will no longer use the cached value for this PCH stepping. Since it is a
pre-production stepping, it is most likely not used anywhere anymore.
Change-Id: I07663d151cbc2d2ed7e4813bf870de52848753fd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I00894565efc405a47348236ad7df50071a843487
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77972
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I got confused and used UFS (User Facing Side) for the User Facing
Camera (UFC) in the FW_CONFIGs. Change references of the camera from
UFS --> UFC.
BUG=b:300690448
BRANCH=None
TEST=None. The camera has not been enabled yet.
Change-Id: I4f8240ae51aad1e077f325a9eab5a2a92f1402cb
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79997
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PcieRpEnable option is redundant to our on/off setting in the
devicetrees. Let's use the common coreboot infracture instead.
Thanks to Nicholas for doing all the mainboard legwork!
Change-Id: I11c3c45eae0e1451d5c54c17b7e60300dedda8fa
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Built all variants with BUILD_TIMELESS=1 and the resulting binaries
remain the same.
Change-Id: I22bcde2dea726f47f8d64a762ca147efde0b610d
Signed-off-by: Marvin Evers <marvin.evers@stud.hs-bochum.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Instead of checking if there is more than one PCI segment group and
erroring out in that case during the build, add this requirement as a
dependency to the GENERATE_MP_TABLE Kconfig option. The mpspec.c source
file only gets included in the build if GENERATE_MP_TABLE is selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ie532a401ad0161890d0fb4ca2889af022d5f6b47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79994
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The `d` flag used in .section is unknown in LLVM/clang 17 and fails
the build. It is also not documented in the ARM compiler manual.
The GNU assembler supports the `d` flag but it also seems to compile
without.
ARM compiler manual: https://developer.arm.com/documentation/101754/0621/armclang-Reference/armclang-Integrated-Assembler/Section-directives
GNU compiler manual: https://sourceware.org/binutils/docs/as/Section.html
`coreboot.rom` does not change between compiling a google skyrim board
with or without this patch. However the debug info for the following
three files in the build directory changes with this patch:
* build/verstage/vendorcode/amd/fsp/mendocino/bl_uapp/bl_uapp_end.o
* build/cbfs/fallback/verstage.elf
* build/cbfs/fallback/verstage.debug
Change-Id: Ie3735b72349b0cfdd27364a39bcdda390af7bfa5
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79366
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: I18f1e37a06783aecde9024c15876b67bfeed70ee
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79955
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
to 6ms
Modify touchscreen enable_delay to 6ms to meet with spec.
eKTH3915N_Product Spec_V1.3_20221028_IPM.pdf
BUG=b:318443640
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: Id57ab04e61d9e95c962f2c564d3a7e2e7ed6b992
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79978
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
The boot time is improved by 65ms. (762ms -> 697ms)
BUG=b:320381143
TEST=check timestamps in cbmem
Change-Id: I74191ab8cbefa08b7e296312645ea40b46fabf77
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79991
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Accessing RAM before mmu initialized is time consuming. During mmu
initialization, `mmu_init()` and `mmu_config_range()` write logs to the
console buffer and contribue the extra boot time.
This patch adds a kconfig option to move `mtk_mmu_init()` to
`bootblock_soc_early_init()`. When `EARLY_MMU_INIT` is enabled, mmu is
initialized before `console_init()` ready. So `mmu_init()` and
`mmu_config_range()` won't write logs to the console buffer and save the
boot time.
It saves about 65ms on Geralt with EARLY_MMU_INIT enabled.
Before:
0:1st timestamp 239,841 (0)
11:start of bootblock 239,920 (79)
12:end of bootblock 323,191 (83,271)
After:
0:1st timestamp 239,804 (0)
11:start of bootblock 239,884 (80)
12:end of bootblock 258,846 (18,962)
BUG=b:320381143
TEST=check timestamps in cbmem
Change-Id: I7f4c3c6c836f7276119698c6de362794cf4222a6
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This reverts commit acbc4912375085a099c2427def464d6e481f2a90.
Reason for revert: CB:79525 fixes the issue that led to the revert
by not maintaining the heap in the SMM-stored copy of ramstage at all.
Change-Id: I3c8ef785486d275c9341859d34fce12253bd2bb9
Signed-off-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80023
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Gothrax cannot boot into OS with a kernel loading failure.
Update eMMC DLL values to improve initialization reliability
How to get these values:
- Sending different speed TX/RX command/data signal to eMMC and check
the response is successful or not.
- Collecting above results from each eMMC model that project used.
- Analysing logs to provide a fine tuned DLL values.
BUG=b:310701323
TEST=Cold reboot stress test over 2500 cycles
Change-Id: Ie36cc9948e3d5dee46385e584baad141a249be79
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
These are specific to the brox board, so moving devices to the brox
variant.
BUG=b:311450057,b:300690448,b:319058143
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
will check if this helps detect the storage device in the factory
Change-Id: I18d096040c293abfd4cd0b1bb5f50ba6dcc2e183
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Brox project has FW_CONFIG bits already set up in the project file for
the retimer and for storage, so make sure that the brox device tree
matches those settings.
BUG=b:311450057,b:300690448,b:319058143
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
will check if this helps detect the storage device in the factory
Change-Id: Iaf43003b7e8210eee9016d779839d7048c15825f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79854
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is a mismatch in how PCI memory resources are allocated on Apollo
Lake with the current configuration. While the ACPI code expects
resources to be below PCR_BASE_ADDRESS (i.e. PMAX), the coreboot C code
allocates them above, leading to the following error messages on Linux:
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0000000 window]
pci_bus 0000:00: root bus resource [mem 0x280000000-0x7fffffffff window]
pci 0000:00:13.1: can't claim BAR 14 [mem 0xdeb00000-0xdebfffff]: no compatible bridge window
pci 0000:00:13.1: can't claim BAR 15 [mem 0xdec00000-0xdecfffff 64bit pref]: no compatible bridge window
pci 0000:00:13.1: BAR 14: assigned [mem 0x80000000-0x800fffff]
pci 0000:00:13.1: BAR 15: assigned [mem 0x281300000-0x2813fffff 64bit pref]
Tested on up/squared with Linux kernel version 6.1.0.
Fix this by setting the DOMAIN_RESOURCE_32BIT_LIMIT to PCR_BASE_ADDRESS,
and by moving the UART base address into the expected range.
Thanks to Nico Huber for the help in writing this patch.
Change-Id: I3a805beb47ab4d19cf8dfce0942485e7982861b1
Signed-off-by: Reto Buerki <reet@codelabs.ch>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79957
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial support for multiple PCI segment groups. Instead of
modifying secondary in the bus struct introduce a new segment_group
struct element and keep existing common code.
Since all platforms currently only use 1 segment this is not a
functional change. On platforms that support more than 1 segment the
segment has to be set when creating the PCI domain.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied3313c41896362dd989ee2ab1b1bcdced840aa8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add new memory Micron MT62F1G32D4DR-031 WT:B.
DRAM Part Name ID to assign
MT62F1G32D4DR-031 WT:B 2 (0010)
BUG=b:319778218
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I9e54958490228beb7039d531c709d56ec244b9e7
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79914
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure that CONFIG_ECAM_MMCONF_BUS_NUMBER is non-zero when the
ECAM_MMCONF_SUPPORT Kconfig option is selected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic102b7dca9ffebb2d384a068a1fb1f4b6fb6c5f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79933
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Cavium CN81xx SoC selects ECAM_MMCONF_SUPPORT, but doesn't set a
value for ECAM_MMCONF_BUS_NUMBER which results in it defaulting to 0
which is wrong. Both the Cavium CN8100 SFF EVB and the OpenCellular
Elgon (GBCv2) mainboard specify 32 PCI buses in their Linux devicetree
files, so set the SoC's ECAM_MMCONF_BUS_NUMBER Kconfig option to 32 to
match this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: Ic98381e2cc597cf23af249c71911545692e40f64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79931
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Provide a default for the ECAM_MMCONF_LENGTH Kconfig option for the
ECAM_MMCONF_BUS_NUMBER option being set to 32.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I01e7da5d49f296dde2de41e23e86e3f49fe78193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: I867451ae3d6d37033c9e0e57a4d7fd4a06dedbef
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77738
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
The xeon_sp code worked around the coreboot allocator rather than using
it. Now the allocator is able to deal with the multiple IIOs so this is
not necessary anymore.
Instead do the following:
- Parse the FSP HOB information about IIO into coreboot PCI domains
- Use existing scan_bus and read_resource
- Handle IOAT stacks with multiple domains in soc-specific code
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Change-Id: Idb29c24b71a18e2e092f9d4953d106e6ca0a5fe1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The PCIE MMCONFIG base address value and size is updated correctly to
access the PCIE config space registers.
TEST=Verified that PCIE enumeration takes place in boot log
and config space registers are accessible.
Change-Id: Ifa8377df7a2973a88d414c217b5ed114c8ae5cc3
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79832
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The IOHUBS0 is a data fabric component which has a fabric id value
specific to SOC. Updated the fabric id for glinda SOC.
TEST=Verified that fabric ID is programmed correctly in boot logs.
Change-Id: I91ea7d7e7d9b247cf479471df287ba8c96b83d75
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79830
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Program SATA IOBP and enable clock gating after port enable
bits have been written.
The same registers are already set for DMI and PCIe.
TEST: Lenovo X220 still boots over SATA.
Change-Id: I50970117ddcf8d39796426a19c1a6b57e5b1e690
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79146
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Describe the USB 'current' settings based on MRC.bin that converts
the USB trace length to a predefined register value.
MRC.bin decides which setting to use based on the PC type, mobile
or desktop, and the trace length.
Tested: Lenovo X220 still boots.
Change-Id: I79d35ca16818daec03ee7f464349a4c8ee0f78e4
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to BWG the USB current setting 0 should not be used for
desktop boards. As autoport defaults to 0 if the USB current doesn't
match one of the lookup table entries most of the desktop boards in
tree have such a setting. Print an error to alert users of such boards
to update the USB current settings.
Tested: Lenovo X220 still boots.
Change-Id: If76e9126b4aba8e16c1c91dece725aac12e1a7e9
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78827
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I38ef315dbdadb140e8e7163e755a078bc906e1b5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79963
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: Ib94dd2778cf89ae8b97b43031d729c728f59a29e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79941
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: Ied9f37355432d58f83cb8453111a261c4eddc14a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79937
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from lenovo/x220 are using the reference names for
PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: Ic8bff0516811371e1fbb72765c8d03812a689701
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79940
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: Ife8f3bc8b7fd14bb9a0e8dd4bc3d33b44c8f794f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79939
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: I369ae1fd66326a2cbfa3fe155b0118251e2272d9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-by: Janik Haag
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from asus/h61_series are using the reference names
for PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: I1ba2cb08e60cf806c5d749be15265e577a7abc25
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: I8008fcc994e49c1626fd366c74661fcceb21a323
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Since all devicetrees from asus/maximus_iv_gene-z are using the
reference names for PCI devices, remove the equivalent comments
documenting their function.
Change-Id: I86a7d58f34c0cf5580441b7538b1a7571c41c988
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Use the references from the chipset devicetree as this makes the
comments superfluous.
Change-Id: I50250fcf4105f39e55e8837613880bfe5c69deef
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79967
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since all devicetrees from lenovo/t520 are using the reference names for
PCI devices now, remove the equivalent comments documenting their
function.
Change-Id: I307dbf7a7d6fc9086e868d8315ba7a66b94a24e7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79966
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: I18ce899516fd38b21ded1e3144aa22e705c534b8
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79965
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia5e1ee683fa3d8d216ece26426e9870981ede2ba
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79932
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Correct bank1 to bank0
2. Adjust CLK duty
3. Fix abnormal power off setting
4. Change VDDE power off frame from VGL to VGH
Fixes: 0d50536("drivers/mipi: Add support for BOE_NV110WUM_L60 panel")
BUG=b:319398058
TEST=boot Ciri with BOE_NV110WUM_L60 and see firmware screen
Change-Id: I2f068ba0ec9dede3e3361b55c38a8eca8793905a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The IVO_T109NW41 will be the second source MIPI panel for Ciri.
BUG=b:319025360
TEST=boot Ciri with IVO_T109NW41 panel, see firmware screen
BRANCH=None
Change-Id: I9dc2228d39bb8bb048d1f37727c96b0ad621e912
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The MIPI panel BOE_NV110WUM_L60 will be used for Ciri, enable it.
Also remove the `mdelay(10)` after mtk_i2c_bus_init, because MTK
confirms this is not needed. Add mdelay(2) between VDD18 and VSP/VSN
to meet the panel datasheet.
BUG=b:308968270
TEST=Boot to firmware screen
BRANCH=None
Change-Id: I0a04f062f81c543d38716d7ff185b5633c1aa3a9
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78957
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Always use the high-level API region_offset() and region_sz()
functions. This excludes the internal `region.c` code as well
as unit tests. FIT payload support was also skipped, as it
seems it never tried to use the API and would need a bigger
overhaul.
Change-Id: Iaae116a1ab2da3b2ea2a5ebcd0c300b238582834
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79904
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Extracted from a system running OEM BIOS v03.08 (latest as of now).
Build-tested and boots Linux (through SeaBIOS).
Command used:
intelvbttool --inlegacy --outvbt data.vbt
Change-Id: Ibd999d30d6e8fea1368afae67f4dc1c3039d3ae1
Signed-off-by: Riku Viitanen <riku.viitanen@protonmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I09dd5871cb366ef95410efc1ca6c4337f23b52fd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79912
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
<types.h> already includes <stdbool.h> and <stdint.h>
Change-Id: Ie8676769127d21a3b4693ed947a7231b94e99241
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Rename the segment group parameter of smbios_write_type41 from 'segment'
to 'segment_group' to be in line with the PCI specification.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie6ca0ce8b6b3b0357df72bafa2b6069132d0937e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79926
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I48b393913913db8436f5cbca04d7411e68a53cf7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
As a preparation for the multi PCI segment group support, use
acpigen_write_BBN to generate the _SEG method that returns the segment
group number of the PCI root. Until the multi PCI segment group support
is enabled in coreboot, it will always return 0.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2a812dcc564c5319385e9ad482d29b2984a71b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79924
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce acpigen_write_SEG to generate the ACPI method object that
returns the PCI segment group number for a PCI(e) host bridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94837fdbe140ee1ff904ffd20bdab3e86f850774
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
BUG=b:311450057,b:300690448
BRANCH=None
TEST=to be tested on a device with i2cdetect
Change-Id: If6da1c722e87a50c6d422b300f16a52d884fa08f
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This is needed for NVMe to work when PCIe device is connected to the
CPU side of RPL soc.
BUG=b:311450057,b:300690448, b:319058143
BRANCH=None
TEST=Tested on device and was able to boot to the OS
Change-Id: Ic8a1fdcedf2ec6c7bf1dd00e02ef7c13e9338aac
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79857
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This needs to be disabled for RPL otherwise we'll hit the assertion:
[EMERG] ASSERTION ERROR: file 'src/soc/intel/alderlake/fsp_params.c', line 1066
There is a comment in the referenced file/line in the assertion that
says that "C state demotion must be disabled for Raptorlake J0 and Q0
SKUs." So, disabling it.
BUG=b:311450057,b:300690448
BRANCH=None
TEST=Tested that we didn't hit this assertion on the device after this
change
Change-Id: Ib7b2484de2d84c980550fd951f1e30efab0ee197
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79855
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If4ae9c800325f5de8f170f8922bacffad1c9bb20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77532
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
1.In contrast to the MediaTek Wi-Fi module, the Intel Wi-Fi module needs
to load a SAR table.
2.Describe the FW_CONFIG probe for the settings.
- WIFI_6 for MTK Wi-Fi module MT7921L
- WIFI_6E for Intel Wi-Fi module AX211NGW
BUG=b:315418153
TEST=emerge-nissa coreboot
Change-Id: I37e8adc3de02707b2df541cc5e6f88083554eeb4
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
|
|
This makes sure that prefetchable mem64 memory gets allocated above 4G
which allows non prefetchable resources to be allocated in the tight
window below 4G.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I27d4f9ce91c12ed4ab3b2f18f2a92b742115d275
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79058
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Historically resource allocation in coreboot was 32bit x86 thing. To
remain compatible with this behavior (e.g. to keep 32bit payloads
happy), resource allocation limits resources to 32 bits unless
explicitly overridden. However this behavior is not always appropriate:
e.g. on non x86 platforms the PCIe mem decode window could be above 4G.
Another case on x86 is where the decode window(s) below 4G are not
adequate for fitting all resources and the payload is 64bit
capable (e.g. Linux).
This adds a Kconfig flag to override the behavior to limit resources to
32bit by default and to allocate resources according to the real
hardware limits.
TEST=intel/archercity CRB
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I01218a8a3efc4a5f8ba344808949ca6b8898525f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78331
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
driver
Since DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER value on dedede
cannot meet DRIVERS_I2C_SX9324 on nissa, need to update the tuning
value. Update proximity sensor fine tune value with quandiso EVT
machine.
BUG=b:314550601
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot and verify p-sensor
watch 'cat /sys/bus/iio/devices/iio:device*/*raw'
Change-Id: I5fc3bc5876594f2df79d628bd986113d37087c3d
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The APU boards have an NCT5104D chip on the LPC bus that implements some
serial ports that have the legacy IO port interface to the host and
doesn't describe this in the ACPI tables, so select
HUDSON_FADT_LEGACY_DEVICES to have the corresponding FADT bit set. Since
this chip doesn't provide an 8042-compatible keyboard controller, don't
select HUDSON_FADT_8042.
TEST=Surprisingly, this doesn't seem to make a difference to the Linux
kernel; is creates all ttyS[0..3] devices with and without this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8872b8c3d6e0610630ba17a0fccdcf8cebb1d3c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79894
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
HUDSON_LEGACY_FREE controlled both if the legacy devices and the 8042
flags are set in the IA-PC boot architecture filed of the FADT. Since
some systems have legacy devices on the LPC bus, but no 8042-compatible
keyboard controller, replace this option with the two new options
HUDSON_FADT_LEGACY_DEVICES and HUDSON_FADT_8042.
TEST=The FACP table doesn't change on APU2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id4ff85630c90fb2ae8c8826bbc9049a08668210d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79893
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use call_smm instead of writing the command number directly to the APMC
SMI command IO port.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iefbdb3d17932d6db6a17b5771436ede220c714fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79828
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the inline assembly code in call_smm doesn't make it exactly
obvious how this function to call the APMC SMI handler works in detail,
add a more detailed explanation as comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3566af191492ce00a3033335ff80e01c33e98e63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Use pm_acpi_smi_cmd_port() to get the APMC trigger IO port instead of
using the hard-coded APM_CNT define. This makes sure that the correct
APMC IO port will be used even when a system doesn't use the default
APM IO port.
TEST=SMMSTORE V2 still works with the EDK2 payload on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb79c91cfcd75db760bd80cff7f3d0400d1f16cd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79568
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use call_smm instead of open-coding the same in inline assembly
functionality in init_store. The local ebx variable is dropped, since
call_smm takes a pointer to the argument instead of an integer, and the
local eax variable is renamed to res to make the code a bit clearer,
since the EAX register is used for both passing the command and
subcommand to the APMC SMI handler and to get the return value from the
handler.
TEST=SMMSTORE V2 still works with the EDK2 payload on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib14de0d120ae5c7db3bb7a529837ababe653e1a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Tell binaryPI to not disable the LPC decodes for the IO ports used by
the serial ports on the Super I/O chip during the AmdInitReset binaryPI
entry point. Checked the Stoneyridge binaryPI source code which is
closely enough related to be reasonable sure that this option only
controls which LPC decode bits get cleared and won't have any other side
effects.
TEST=Now the full console output from the APU2 board gets printed on the
serial console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Change-Id: I91ef4423bd7bf6c1d7a175336f0f89479f2cde02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79852
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3a317d031e71f86afc50b229d1b97197552f4fa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Now that Stoneyridge also reports the GNB IOAPIC on the domain and with
the IOMMU_IOAPIC_IDX resource index the common AMD MADT code expects, we
ca switch over to using this common code on Stoneyridge too.
TEST=The resulting MADT doesn't change on Careena
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If4ce71a47827e144c4d4991152101650904901f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move the GNB IOAPIC resource from being reported in the GNB PCI device
to the domain and use IOMMU_IOAPIC_IDX as resource index, so that the
common AMD MADT code will be able to find the resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If6e9aaf4a3fa2c5b0266fd9fb8254285f8555317
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
