| Age | Commit message (Collapse) | Author |
|---|
|
The NAF_VWE bit definition is already present in
src/soc/intel/common/block/include/intelblocks/gpio.h.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I1fe713ee08438be49308f5e777cd466cdbc45d71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65756
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This reverts commit 0225af3c2ba661de82e15f163258605917ca28cf as
it has no effect as the USB interface is configured by FSP S.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I20ca355eb1e088d7a7c8eacbc888ffc90833194b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Modify USB2.0 port[6] setting for WFC camera support
BUG=b:235182560
TEST=Build and boot on pujjo
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I78dad102be2d915a251f6528eef07f2056001b0a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65777
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The do_smm struct element in the mp_state struct was an int even though
it only had two possible states, so change it to bool to make this more
obvious. Also change the return type of is_smm_enabled from int to bool.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d2d95f0497649d67565243d14a5ab9c9cdda412
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65776
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Move audio codec item from fw_config to SSFC.
BUG=b:238353613
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I361ef54cd2ee3e0a423ed5086184936d6f09e099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The SPMI devices on MT8188 are different from previous SoCs, so we
move them to SoC folder.
We also move SoC-specific definitions to soc/pmif.h.
TEST=build pass
BUG=b:233720142
Signed-off-by: Hui Liu <hui.liu@mediatek.corp-partner.google.com>
Change-Id: I666c2a8222a2bd8cd460e2225a7ae48b001da9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65757
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add usb host function support.
TEST=read usb data successfully.
BUG=b:236331724
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Change-Id: I52174306eb0c87c6e5a3665051099b5c0e8f45a0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65755
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add usb host function support.
TEST=read usb data successfully.
BUG=b:236331724
Signed-off-by: Shaocheng Wang <shaocheng.wang@mediatek.corp-partner.google.com>
Change-Id: I3494b687b811466cb6b988164d3c5b6fecc3016a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65754
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Turn off L2C SRAM and reconfigure as L2 cache:
Mediatek SoC uses part of the L2 cache as SRAM before DRAM is ready.
After DRAM is ready, we should invoke disable_l2c_sram to reconfigure
the L2C SRAM as L2 cache.
- Configure DMA buffer in DRAM:
Set DRAM DMA to be non-cacheable to load blob correctly.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I10f1cb8c62dfa78f59a4a5ea6087609668a0c2aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65753
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add power domain data for video and audio.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: Ic5fd496cbc6904b42eae28a62bf00a71f0ef508d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65752
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add PLL and clock init code, frequency meter and APIs for raising little
CPU/CCI frequency.
For usb clock setting, we also implement mt_pll_usb_clock_setting() to
enable usb clock for all ports.
TEST=build pass
BUG=b:233720142
Signed-off-by: Garmin.Chang <Garmin.Chang@mediatek.com>
Change-Id: I03cb5a4c6fa5ddad7da6f955d0c6d0b3395503e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Remove the pad configuration for GPP_B11
as this is not used in Nereid/Nivviks
BUG=b:227694137
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: I3a213ffece75b9a706b96dc142a7e35c8b5973f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65623
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Google uses two digit GPIO pad numbers for internal GPIO references
and Intel has updated their GPIO naming schemes too (see the GPIO
implementation worksheet #641238) so use double digit GPIO pad numbers.
Format -
"GPP_%c%02d", gpio_group, gpio_pad_num
e.g.
GPP_A0 -> GPP_A00,
GPP_V2 -> GPP_V02,
GPP_C9 -> GPP_C09 etc.
BUG=b:238196741
TEST=Able to build meteorlake based google/rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ieb7569c1a35b08c0970a604ec7b4b91e6179dd28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65719
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update partial headers to MeteorLake FSP v2253.00
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: If2d6c80bd35afd68588fef57e38064c5b1e1a888
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This micro optimization of using unsigned char instead of unsigned
integer actually generates one more instruction.
.LVL296: .LVL296:
.L198: .L198:
.loc 1 912 16 is_stmt 1 discriminator 1 view .LVU1740 .loc 1 912 16 is_stmt 1 discriminator 1 view .LVU1740
uxtb r2, r3 | cmp r7, r3
cmp r7, r2 <
bhi .L199 bhi .L199
.loc 1 916 1 is_stmt 0 view .LVU1741 .loc 1 916 1 is_stmt 0 view .LVU1741
add sp, sp, #36 add sp, sp, #36
.cfi_remember_state .cfi_remember_state
.cfi_def_cfa_offset 20 .cfi_def_cfa_offset 20
@ sp needed @ sp needed
pop {r4, r5, r6, r7, pc} pop {r4, r5, r6, r7, pc}
Fix it, so nobody can copy that.
Change-Id: If5ffeacc7ac3c53a82b260cfb81ef7debc40034a
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65731
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
There are clock settings for usb in mt8195 and mt8188, so we add a new
function which is implemented in pll.c to do this.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I40b358b197541bc5281645879553340059829db3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65750
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add I2C controller drivers.
TEST=build pass
BUG=b:233720142
Signed-off-by: kewei.xu <kewei.xu@mediatek.corp-partner.google.com>
Change-Id: I7d19df3571e5588c7b20d9c7f26fa177b2221851
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Based on latest schematic:
Set GPP_S2 DMIC1_CLK/ GPP_S3 DMIC1_DATA to NC.
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: I4044cb7ba963153e1e478294dbf960fb79b97b5c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Agah doesn't support TBT interface so disable it in devicetree, for
fitimage configuration is at chrome-internal:4846869.
BUG=b:224423318
TEST=Build and check DUT boots.
Change-Id: I1eb43e86de5debf24ebde6eace14fe04bad5e5b1
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65699
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the VR domain settings based on the request of internal team.
- IA ac_loadline from 2.3mOhms to 2.4mOhms.
- IA dc_loadline from 2.3mOhms to 2.28mOhms.
- GT ac_loadline from 3.2mOhms to 3.13mOhms.
- GT dc_loadline from 3.2mOhms to 2.94mOhms.
BUG=b:237044562
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I665665ab8e3bcd6d4643f8b954b86fad3ef78ccd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: Ica9014ee077ea416fdb4c7316c9619cf81fca510
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65730
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This change aligns the Meteor Lake TCSS functions of pad configuration
and Thunderbolt authentication through the sideband access.
BUG=b:213574324
TEST=Build platforms coreboot images successfully.
Change-Id: I393f6e1c7d322878cbb684cd95bfa2477195b23a
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Use same log level as print_num_status_bits to make sure the
status bits are properly prefix and the newline is added.
Change-Id: Ib33798eec7cba601d0d49646c5fc429de5268417
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65715
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
CNVi DDR RFIM feature should be reported via _DSM function. Add the
generic WiFi device which will generate the proper ACPI code and
pass the CnviDdrRfim parameter to FSP by SoC driver.
TEST=Connect to WiFi network on Ubuntu.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ice2abe972f38dd819f7f0103f7b9a697096f1cd9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63835
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the comments about port designation after mapping the root hub
ports to board connectors. Add macros reflecting the length of the
USB signal traces.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ib2e842ef240ab25e2a9f7fa2e0766206fde7943d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9590a33e828906de083cb23c8b647ed2da0750ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64222
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reflect the vendor's firmware FIVR settings.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I97b3b4f9470267961c138fea70703606373f6d52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64051
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add board connectors and headers descriptions to SMBIOS. Specify
type 1 and type 2 fields as in vendor firmware.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie64be21ff302274769b77550c29e58d4ea1376d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64050
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Boot Ubuntu 22.04, load nct6687 kernel module and use lm-sensors
to display information about sensors on the SIO EC.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I55445a94f0de3510324b12558c4343e819412ac0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63928
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Original firmware ships with PTT enabled by default on poweron.
PTT takes priority over SPI/LPC TPM so enable the CRB interface
until coreboot implements a way to select the interface and adapt
the API to handle any TPM detection.
TEST=Boot the board and see PTT is detected by Windows and Linux
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I74dc2c4245388a9f134b27e313ef26124b952594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63834
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply correct configuration of HD Audio.
TEST=Launch ubuntu 20.04 and launch a YouTube video, check if
microphone detects an input in the system sound settings.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I6acc22aa58f6cc99df1d48d651122e74fe08ec02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63723
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the full PCIe root port configuration. Proper initialization of
the root ports depends on the correct GPIO programming including
virtual wires. Do not program the CLKREQ signals in coreboot to let FSP
detect and configure CLKREQ pads. Otherwise the CLKREQ pads are
reprogrammed by FSP despite having GpioOverride=1. The pads that
should not be touched by coreboot are left commented in the board GPIO
file. CLKREQ reprogramming caused undefined behavior when ASPM and
Clock PM was being enabled by coreboot on PCIe endpoints of CPU PCIe
x4 slot (coreboot printed a lot of exceptions and simply halted).
TEST=Boot the MSI PRO Z690-A DDR4 WiFi with all PCIe/M.2 slots
populated and check if they are detected and functional in Linux.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I50199d2caf54509a72c5100acb770bf766327e7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63656
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In preparation to CB:63514, make use of the variant concept and convert
the existing T440p mainboard into a variant.
Change-Id: I3c7e06607135ce0a62c158e296b51e5311234505
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Override tdp pl1 value to 30W in CPU MSR.
BUG=b:238268367
TEST=Boot to Chrome OS and check cpu log show "CPU PL1 = 30 Watts".
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ibbd5ecc4b87ede5a62799020c741e5bff2952144
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Hide the device so that Windows does not warn about a missing driver.
Tested on system76/lemp10:
- EC functionality remains functional on Linux 5.18.6 and Windows 10.
- Windows 10 does not report the device in Device Manager.
Change-Id: Iffcb873b85e077535d4de5806d01ba309f46c017
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64700
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fixes: 5315e96abf ("arch/x86/postcar: Use a separate stack for C execution")
Resolves:
https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/TGIWAKZKELJRAEMKJNYRJ55MX2CXYNCV/
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/
thread/2JC3GNJSGXUD6DRVUY7O2O3W6OM3E2MY/
5315e96abf broke platforms using FSP-M to tear down CAR. It was pushing
the value at '_estack' into %esp rather than the address '_estack'.
Change-Id: Ie1fc70bd60fe3a2519ffb71625a35630fa732ff6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65716
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Based on comments on CL:65534, update the non-early GPIO table.
These are cases where Arbitrage wasn't able to find a useful
heuristic, or the memory straps, where Arbitrage sees them as NC in
the schematic.
BUG=b:234626939
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I6e00892243cd6af99dc1921ee3fc712f6cbb58c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65710
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Customize brya baseboard early GPIO table to add mem straps for
ghost4adl, change I2C bus for TPM to pins H6/H7, and remove pins which
are not used on ghost4adl (E16, H13).
BUG=b:234626939
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: I126a66fc5d24fbefec99abf87862c55b50c5e398
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65534
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia81b4397c92f100abad9b1e974bbebfe49008439
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I19cd9360a2571e8b88b1ed1005ce8564bdacb297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Idd214893f304ce767633ffbf905f47a5092c2ee4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
TEST=Boot MSI PRO Z690-A WIFI DDR4 with SP1, KBC and EC exposed
to OS via ACPI. Configure SP1, ACPI, KBC and EC devices via
devicetree.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia489a39956c1448c7f11845ecc9e1df83ccb25ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63927
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add VBT from vendor firmware v5.24 and configure display outputs in
devicetree.
TEST=Boot TianoCore UEFIPayload and notice the UEFI Shell on the
connected display via HDMI or DisplayPort on rear panel.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ide560ade5e29844c2f4310639fe5b76ba91865be
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Tested with 4x KINGSTON KF3600C17D4/8GX DIMMs.
TEST=Include the microcode from vendor firmware and FSP blob from
Intel R&DC. Boot the platform and see ramstage is executing.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I98b9c77d791d18640cb05c133cb0bf14ad22dcdb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
BUG=None
TEST=None
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Change-Id: I2eb6e94e5d87bb19b11e27461e2b5bdaee9d59bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65691
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use USB4 fw_config to enable TBT PCIe RP0.
BUG=b:237619214, b:237623610
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: Ie3e51a0f30e0c9d20127c017436813d4ede95639
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65696
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=None
TEST=None
Change-Id: I7a4081f0f57e0faa968ad142debdc40a9e26dc9b
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65690
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On nissa, WLAN should be a wake source, so don't put it into D3cold
during suspend.
BUG=b:233325709
TEST=Wake-on-WLAN works on nereid
Change-Id: Iddd5fa8db05b85d2c799f679d664876109187d0c
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
CPUIDs and Engineering Samples decoding based on DOC #618427.
Keep MICROCODE_BLOB_UNDISCLOSED for PCH-N SKUs as microcode
blobs are still missing.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ibb1337e5cbf5b82fdaceb7eb4661d708a32ff0ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65564
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
This patch enables Cnvi BT Audio Offload feature and also
configures the virtual GPIO for CNVi Bluetooth I2S pads.
BUG=b:233834597
TEST=Verified BT offload feature on Nivviks P1.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iffbd08351d083d2b550f309994af931bceb257d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Configure the unused virtual CNVi BT GPIOs to NC since we
are using BT over USB mode for Nissa.
BUG=b:233834597
TEST=Verified BT offload feature on Nivviks P1.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Id84823b9ad921ebd7ff773d6cce581563613745f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65669
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Disabling the Package C-state demotion feature for nissa baseboard
as a work around to the S0ix issue and also this doesn't have any
impact on the power and performance measured and verified by the
PNP team.
This feature will be enabled after its functionality is verified with no
issues and also based on its impact on PNP.
BUG=b:235005582
TEST=Boot and verify that S0ix issue is resolved.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I4d586b962c27b86ee75651dcd655bc0868504646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65664
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
BUG=b:235005582
TEST=Build and boot to verify that the right value has been passed to
the FSP.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I9e254988bc3d20b9f9e42a605cc0ebd419ab49ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Aligning the "memory" ranges in devicetree is supposedly only needed on
very old arm32 kernels. So let's get rid of it.
Incidentally this fixes smaller than 1MB memory regions where the size
would end up being 0.
Change-Id: Ibbf5e331c79ed4ae3ed8dd37bf7a974d2412ce12
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add 0x7d55 as another ID for Meteor Lake graphics controllers.
TEST=Boot with MTL silicon to check coreboot log for DID2
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: Iea01f6d4f2469fc0eeac73a3f1c4b9af1f39463c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
Based on latest schematic to update the PCIE and USB setting.
BUG=b:237659398
BRANCH=firmware-brya-14505.B
TEST=emerge-ghost coreboot
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I97989b7a8d9104379ffb0b454d7248d49855f680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
|
|
DPTF Policy and temperature sensor values from thermal team.
BUG=b:237640264
TEST=USE="project_crota emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: I43340bd1acfe6ec2036ea80339dbf896615a456a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65563
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib8d9a9e94d16ad291d9cc8576db845a634ae026e
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65614
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The LabTop was renamed to StarBook since the release of the Mk V.
This change keeps the directory name more relevant, as there are
more boards using the name StarBook.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3513fb56c1adf663ed7bcdade2cc52cd8c0d6f4b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65640
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Change-Id: I76e4438dea6a7fcce06211af808eee51465f19c5
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4fd7f86a61d1a1a8133a633eb257275222f27af9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64769
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I65f8e6860a7f734a7d2b8c0055cb18d851f38ad0
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I62d8374eb7c2499d34c3f43c9f7fd01caaa3e2f4
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ia8a78e9947466e88fb9abf1b91ef21ce763240c1
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I25d0f5a97ec5dd023e2acb458de1b20427fe353e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enable SaGv support for Kinox
BUG=b:238153479
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Id4646f1621a414a1ec4e272c826b0baea2bb4e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This contains the following commits:
* d55c315 mb/starlabs: Remove padding from logo
* 6412d38 mb/starlabs/starbook/cml: Update EC from 1.03 to 1.07
* fb72ac5 mb/starlabs/starbook/tgl: Update EC from 1.00 to 1.03
* cda5eaa mb/starlabs: Rename labtop to starbook
* f16020a Revert "soc/mediatek/mt8186: Update SPM firmware to
pcm_suspend_v0215…
This also changes starlabs/labtop Kconfig to use the new paths for
the EC binaries from the above commits.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I83143118af422276ee335ad4ef9eca76f54a9fc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Modify ddi_ports_config based on schematic.
DDI_PORT_A = DP
DDI_PORT_B = HDMI
DDI_PORT_1 = Type-C DP
DDI_PORT_3 = HDMI
BUG=b:237419696
TEST=Boot to Chrome OS and check all display port working
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I7c0458f0dbd4637b91af9e01664073e1f8a7a614
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch fixes the issue with INTC1056 invalid resource reported by
alderlake-pinctrl Linux driver on ADL-S platform. The driver also
includes GPIO Community 3 in the GPIO list compared to ADL-N which
was missing in GPIO ACPI device.
TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A DDR4 WIFI and check there is
no invalid resource error reported by alderlake-pinctrl
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I23da68c247de86438cc2eef2b5a5a9aa711c1d7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If66c2799d4d74ff9f309665a0336b5f679796f9f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Currently the EC's MKBP interrupt line is programmed as dual-routed to
both SCI and IOAPIC. The brya EC will pulse the MKBP GPIO and also
send a host event when there is an MKBP event for host to service.
This causes an extra SCI to be generated, and the kernel will respond
to each MKBP event with an extra unnecessary host command. Changing
the pad configuration for the MKBP GPIO to APIC only fixes this issue.
BUG=b:236706977
BRANCH=firmware-brya-14505.B
TEST=excess GET_NEXT_EVENT host commands are gone from EC log
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic7dd596987f6d34c69d46674bdd07785235e2d4c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65480
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EEs have observed the ramp down delay on this signal in more detail
and 40 ms can still meet the sequencing requirements.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I49ef801f7a3fd7945ded63da1399eaf57fd6aef0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65581
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since the GPU will be left powered on, the kernel has the opportunity to
save context and this method to save the BARs is not required.
BUG=b:233959099, b:236289930
TEST=build
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I19cf12426361a53e3672c1e05aa6d68d5dd6627c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Initialize NOR-Flash in the bootblock.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I8ee24b5b24643bce57eb29682d6d0234a6fe8641
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65622
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add NOR-Flash drivers for flash read/write.
TEST=read nor flash data successfully.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I4e84fc023111b86f7f4984020d24811e3361ba03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65621
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes all instances of the `ADL` from Meteor Lake SoC
directory.
TEST=Able to build and boot Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8153b2070467beb582ce1f70be97272ce09ca04c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65667
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates IFD_CHIPSET kconfig value from `ifd2` to `mtl`.
TEST=Able to build and boot Google/Rex image on MTL emulation
platform.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I416f881bcbe3dd7494ead636d6b593366a51b31c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure TDC current for VR domains.
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
- Others comes from 'commit c6d716694272 ("soc/intel/alderlake: Configure the SKU specific parameters for VR domains")'
BUG=b:237230877
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ie9cf8975309b57b4189e2b50f37bd61ac0105e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65659
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DPTF oem_variables and override based on charger type.
BUG=b:230803675
TEST=1. With 90W adapter, check ACPI object ODVX and oem_variable[0]=1
Name (ODVX, Package (0x06)
{
0x00000001,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
})
2. With 65W adapter, check ACPI object ODVX and oem_variable[0]=0
Name (ODVX, Package (0x06)
{
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
})
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I78929ecbc9db56aa234b3f46c641d1f2f3b7cba8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
agah proto boards with i7 silicon face boot issues due to high power
consumption during MRC training.
This patch is a temporary WA to run in SAGV disabled mode while the
thermal issue is being investigated.
BUG=b:234402102
BRANCH=firmware-brya-14505.B
TEST=Build CB image and boot on agah board.
Change-Id: I431d233b23fb4f5c68117ea380fdec5646b88346
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65300
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Configure some basic FSP parameters in devicetree for
to allow for booting an OS.
Change-Id: Iff227c70d0155ac27d6ffa50a069d154bb7fce3c
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63499
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Based on the output of:
- inteltool from CB:63374
- intelp2m from CB:63403
TEST=Build coreboot binary for msi/ms7d5 and boot the board.
Change-Id: If37eaf875f8fcfc64299227744a8c40d304a0214
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Initial mainboard code MSI PRO Z690-A DDR4 WIFI. The platform boots up
up to romstage where it returns from FSP memory init with an error.
What works:
- open-source CAR setup
- NCT6687D serial port with TX pin exposed on JBD1 header
- SMBus reading SPD from all 4 DIMMs
This board will serve as a reference board for enabling Alder Lake-S
support in coreboot. More code and functionalities will be added in
subsequent patches as src/soc/alderlake code will be improved for
PCH-S.
TEST=Extract the microcode from vendor firmware and include it in the
build. The platform should print the console on the serial port even
without FSP blob.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I5df69822dbb3ff79e087408a0693de37df2142e8
Signed-off-by: Igor Bagnucki <igor.bagnucki@3mdeb.com>
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
The comment indicates CSE's data partition is placed after BP2. But, it
was place after BP1.So, the patch updates the comment to reflect the
CSE Region layout correctly.
TEST=Build the code for Brya and didn't notice any compilation errors
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ic871e2e395de17157f4f526064a26bfad538707f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
FLASH_DUAL_READ is a common configuration for all MediaTek SoCs, so we
move it to common folder and select it in SoCs' Kconfig.
As suggested in CB:58837, we also rename FLASH_DUAL_READ to
FLASH_DUAL_IO_READ to reduce confusion.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: If267a332519412a7919c5b7817047fabe4a564c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65620
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add GPIO drivers to let other module control GPIOs.
TEST=build pass
BUG=b:233720142
Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com>
Change-Id: I0a2a5178949e9ad3e033ac332e0f1e8565e39b3d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65619
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
gpio_set_pull(), gpio_set_pull_pu_pd() and gpio_set_spec_pull_pupd()
can be reused for mt8192, mt8195 and mt8186, so move it to new file
"gpio_op.c" in common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I81ab9b01ee20fccf3ef29c5902597b5045d3e36a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65641
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add timer drivers to Makefile.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I0e3e58c7118a18e738a5abba391db0be9cfd7bf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65588
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
timer_prepare() is the same for MT8195 and MT8186, so move it to
common folder.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I91a6f4ecc665a058cb7a0ba96c15b27d6dc97d13
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65602
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add watchdog support for MT8188.
This implementation is based on chapter 3.10.10 in MT8188 Functional
Specification.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Iaf56c78d89af53d0272583b463c050e69bbeb07a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65587
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There are more and more variables which are SoC-specific, so add
soc/wdt.h for each SoC and rename common/wdt.h to
common/wdt_common.h.
wdt_set_req() is almost the same for mt8192, mt8195 and mt8186, so
move it to a common file wdt_req.c.
TEST=build pass
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I7a334b3e7cd4f24a848dd31aca546dc7236d5fb8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65636
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Sabrina previously didn't support UART mapping in psp verstage. Now that it has been enabled, add the relevant uart code here.
BUG=b:218709292
TEST=Set serial soft fuse, boot to kernel, check logs
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I591fa69b6e722929839babfff62e9d56c68e1112
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65532
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I93c16b563c7a4f4c653d2ebfd001170cb0fca82e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ia087b62904fd515bf73960a188b225f1d49197dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65646
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alder Lake-N based nissa boards use compressed ME_RW blobs for CSE FW
Update. Choose SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE Kconfig to perform
CSE FW sync in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW upgrade/downgrade on nivviks.
Change-Id: I00630096c52434f44914f3ae82ff043ecf77b80d
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65368
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
When compressed ME RW blobs are used for CSE FW update, it has to be
loaded into memory to decompress. So perform CSE FW update in ramstage.
Alder Lake-N based nissa boards use compressed ME RW blobs to save on
SPI flash size. Enable CSE FW update in ramstage.
BRANCH=firmware-brya-14505.B
TEST=Perform CSE FW update on nivviks and verify upgrade/downgrade
works.
Change-Id: Ide9471146d186dca11fb020e5006eeaa01442669
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some Alder Lake-N boards will use compressed ME RW blobs to obtain
savings on the SPI size (1916KB before compression, ~1132KB after
compression). So add an additional check before calling
cse_fw_sync() from romstage. When compressed blobs are used, the call to
CSE firmware update has to be in post-RAM stages.
BRANCH=firmware-brya-14505.B
Change-Id: I0d9ede52cb493974e4ba6e2e2cf11c9789b3b087
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63760
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There is a new ground rule, variant should honor baseboard lock gpios.
Thus, lock the gpio which is locked in baseboard.
BUG=b:216671701
TEST=build passed.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I9f0fcf52b6b7d622e4fd182e007de6401856c7fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65645
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2d99523647dfb43265db8f2701b525afd1870fc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch enables X2APIC to avoid hang-ups due to
`Switching from X2APIC to XAPIC mode is not implemented.`
BUG=b:237924211 ([MTL-FSP][v2222.1] Lists of boot issue with MTL FSP)
TEST=Able to enable X2APIC on rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I58649a9a6c9c0ba86856f6aa5fb470e2ef774e90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65617
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
