summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-03-16rockchip: update make_idb.pyhuang lin
make_idb.py only support RK3288 before, add chip parameter, so we can support RK3399 either. Change-Id: I6811acb7f0cdaf1930af9942a70db54765d544d5 Signed-off-by: huang lin <hl@rock-chips.com> Reviewed-on: https://review.coreboot.org/13913 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-16skylake mainboards: Configure gpio PADRSTCFG to PLTRSTNaresh G Solanki
With gpio PADRSTCFG set to DEEP & GPIROUTIOXAPIC=1 & PADRSTCFG, causes IRQ storm after S3 resume. GPIOs that fire IRQs via IOAPIC need to get their logic reset over pltrst and hence configuring PADRSTCFG to PLTRST to prevent IRQ strom after S3 resume. BRANCH=glados BUG=chrome-os-partner:50536 TEST=Build for kunimitsu and Boot on FAB4, no irq storm observed after S3 resume. Change-Id: I7f1ae90aed03778e7d6cb2d79de0efe9a6d9e20d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: aff91da4feaf8f7e42cfeee756cf468288cbfd68 Original-Change-Id: I7cac60fb0144e090b8decb05d948b2d8d2f8deac Original-Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329453 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331174 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13992 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-16parade/ps8640: Clean upPatrick Georgi
Sort out some style issues that were identified by Paul. Change-Id: I9ed946ae613c87234f8c9824eb14b8d28909dfcf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14064 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-15pcengines/apu1: Enable USB overcurrent detection.Tobias Diedrich
The two external USB ports and the internal USB header have overcurrent protection chips with the low-active overcurrent signal connected to the chipset. The power-on default for this register disables the software detection of overcurrent conditions. After setting the register Linux correctly shows the overcurrent condition in the kernel log (tested by shorting the 5v and gnd lines on J14 / the internal USB header): [ 2015.229921] usb usb1-port3: over-current condition [ 2015.449925] usb usb1-port4: over-current condition Simlar for the external ports: [ 256.237916] usb usb1-port1: over-current condition [ 256.458084] usb usb1-port5: over-current condition Note that each signal is shared between two ports: usboc0#: External ports (port1/5) usboc1#: Internal ports (port3/4) Change-Id: I02d498053b8ec61dc206e74a96c4a1dcfd4fae92 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/14084 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15lenovo: add config ONBOARD_VGA_IS_PRIMARYPatrick Rudolph
Fix for the T4xx and T5xx series. It does not apply to X2xx/X6x series as those have only one GPU, which is always connected to the display. The T6x series needs special care not handled with this patch. Without ONBOARD_VGA_IS_PRIMARY the onboard GPU would be deactivated in case a dedicated GPU is found and active, leaving the system without a working display. Change-Id: I94d1700e9afb75de83a4f2ed1ff53ba3b0559ae1 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/14031 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
2016-03-15google/oak: add table for 4GB configurationPH Hsu
BRANCH=none BUG=chrome-os-partner:49229 BUG=chrome-os-partner:50806 TEST=power on to kernel on Oak Rev3 with 4GB dram Change-Id: I32fa881df12eb9b7f66086904aebde3dd1483fbf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14089 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15mediatek/mt8173: Enable 4GB modePH Hsu
If the system is using 4GB of memory, enable 4GB mode in the memory controller. Change-Id: I4d0f8ad8d43ff45dd786f4244b11c0879d2088cd Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94c8b7ad911c93c4325113e7afc009f2f81d2275 Original-Change-Id: Ia3640882a46e695550e679dc70611855b64a560f Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331811 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14088 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15google/oak: Remove EC_SUSPEND_L from APKoro Chen
This pin is not used anymore since Rev5. BRANCH=none BUG=chrome-os-partner:49375 TEST=make and boot on Rev4/5 Change-Id: I3c775eb2b5e05256523bfd8be814e516944a2f90 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a87e3babe28413bd879a2d95d4612a5b6b541419 Original-Change-Id: I87972ff8961309ecdad03639e1b6fac1da119cd7 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/331810 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/14087 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-15x86: Drop CONFIG_COMPILE_IN_DSDTStefan Reinauer
This option is no longer needed, as FMAP support has been fully integrated in coreboot Change-Id: I6121b31bf946532717ba15e12f5c63d2baa95ab2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/14078 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-15vendorcode/intel/Kconfig: Add broadwell_de symbol to fix lintMartin Roth
The Kconfig lint tool is complaining because this symbol doesn't exist. Create a temporary definition that can be removed when the chipset is added. Change-Id: I6a8abffcc91773aae16721ee1f48c4c64bd6b486 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14091 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-14vendorcode/intel/fsp1_0: Add Broadwell-DE SoC vendor codeYork Yang
Initial vendor codes to support Broadwell-DE SoC. This is FSP 1.0 based project and is based on Broadwell-DE Gold release. Change has been verified on Intel Camelback Mountain CRB. Change-Id: I9262c9d70a58f0c7427f0658948adf080f2f6d8f Signed-off-by: York Yang <york.yang@intel.com> Reviewed-on: https://review.coreboot.org/14030 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp_baytrail: Enable LPSS in ACPI modeBen Gardner
This change fixes LPSS ACPI mode. Previously, enabling ACPI mode would result in unusable devices, as the resources were set to 0 and the devices were disabled. lpss.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting PcdLpssSioEnablePciMode==LPSS_PCI_MODE_DISABLE and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ This doesn't handle the case where the FSP has PcdLpssSioEnablePciMode set to disable and the devicetree set to default. Change-Id: I12fffea3820ed948defe7a4f11af6b6363402560 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14042 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-14intel/fsp1.1: Mark graphics init done after SiliconInit phaseDuncan Laurie
If the VBT was provided to the FSP GOP driver then graphics init will be done as part of SiliconInit step and we can mark that when it is completed. This will result in the "oprom" flag being set properly in the coreboot gpio table and the netboot firmware will have video. [pg: avoided conflict with Quark that comes without silicon_init_params.GraphicsConfigPtr] BUG=chrome-os-partner:50864 BRANCH=glados TEST=boot image.net.bin on chell and get working graphics without being setuck in a reboot loop thinking graphics needs to be started when it already has been. Change-Id: I0e481b4be57096ed5c60d78e3fa00f3bb2a4eae1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 089d93c712431d1b5923e844137c558994555e95 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331301 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-(cherry picked from commit eeb9d470d8118422feb39ca71106972f2882e240) Original-Change-Id: Ic59bad27eb9f184ca3eba24643851bfadfe23ab5 Original-Reviewed-on: https://chromium-review.googlesource.com/331355 Reviewed-on: https://review.coreboot.org/13986 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
2016-03-13nb/amd/mct_ddr3: Use correct initial UI setting during DRAM trainingTimothy Pearson
Rebasing change I3be808db5d15ceec4c36d17582756b01425df09a did not take into account the default UI setting introduced in change I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 , causing DRAM instability and occassional failure to boot. Use the correct 1UI value for the modified function semantics. Change-Id: I9fd24cf83e4c4083c6e467d49021c98e5f5f2c53 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/14073 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Fix LPE initialization and enable ACPI modeBen Gardner
This change properly assigns resources to the LPE (Low Power Engine for Audio) and enables ACPI mode. lpe.c was copied from intel/baytrail with a few minor adjustment for the different config structure. ACPI mode requires setting LpeAcpiModeEnable=LPE_ACPI_MODE_ENABLED and applying the patch that disables clearing gnvs. https://review.coreboot.org/#/c/14040/ Change-Id: I3fff9aa158bde88e571082642d4f985a5ae1976e Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14041 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13intel/fsp_baytrail: Don't clear gnvs in acpi_init_gnvs()Ben Gardner
That wipes out all previously stored settings and breaks running devices in ACPI mode. This more closely matches what is done in intel/baytrail. Change-Id: Ie993c9f9e1eceb73d016d2df72770a27abb26ec1 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/14040 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i3100: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i3100 boards in the chipset. Change-Id: Ia66a0561c75777a9e98bb87117859808a2ff3732 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13786 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-13northbridge/intel/i82810: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i810 boards in the chipset. Change-Id: Ifda7dcfdf37b6affce838ee96ca6382b2d4be8c3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13784 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12northbridge/intel/i82830: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i830 boards in the chipset. Change-Id: I0a63ddd3c5e43ea65f776385f54eceb6569751ac Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13783 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12nb/amd/mct_ddr3: Consolidate duplicated codeTimothy Pearson
read_dqs_read_data_timing_registers() and read_read_dqs_timing_control_registers() served essentially the same function but had slightly different semantics, causing confusion and needlessly complex Family15h code. Consolidate both into read_dqs_read_data_timing_registers() and adjust surrounding code to match new semantics. Change-Id: I3be808db5d15ceec4c36d17582756b01425df09a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13994 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/skylake: Do not log wake source on resetDuncan Laurie
Skip logging a wake source when just resetting without coming from S3 or S5 state. This will prevent the occasional spurious event like PCI PME from showing up in the event log. BUG=chrome-os-partner:40635 BRANCH=glados TEST=run warm reboot teset on chell and ensure no wake source is logged Change-Id: If739034dc9022b37c90b9cc849a00c604383e70f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e7b5cc91adc3ed10df7cebd758cf8144216b9890 Original-Change-Id: I16f4f98df8c70fd25986a8b3644334c7209fd083 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329846 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331173 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13991 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12intel/kunimitsu: Add SD card detect GPIO for SDHCI runtime PMmgarima
Enable SDHCI runtime PM since the display flicker due to SCC Power Gatingis addressed by 0x82 microcode BRANCH=glados BUG=chrome-os-partner:44663 TEST=Check if display flicker is gone when SCC is power-gated Change-Id: I7d1ac6e77a0d2e0a25414df6130862efcdae2c82 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b552120cfeff09d16cb79652b7de7296121858ba Original-Change-Id: Id82df475b262e8a91f0a93f8ddf80002b05c52f3 Original-Signed-off-by: Medha Garima <medha.garima@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329651 Original-Commit-Ready: Jenny Tc <jenny.tc@intel.com> Original-Tested-by: Jenny Tc <jenny.tc@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331172 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13990 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to statically clock gate 8254 timerAaron Durbin
In order to save more power by shutting down clocks add the ability to optionally clock gate the 8254 programmable interrupt timer. When doing this the platforms lose their "PC"-ness which certain payloads and OSes rely on such as SeaBIOS. BUG=chrome-os-partner:50214 BRANCH=glados TEST=Enabled option on chell. Noted the bit is set upon booting. Change-Id: I01f9d177bbde417d1efec2e16656a07dcebccbde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 662575aa6a63656dedfa0ce1f202f5fac0205477 Original-Change-Id: Ib4a613cf1c28fc96c36fa2987c4b58a05beab178 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329411 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331171 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13985 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12glados/chell: send an extra VR mailbox commandRizwan Qureshi
MPS IMVP8 VR is not entering PS4 in S0ix on Glados/Chell. The pcode has been updated since v76, and it requires an an extra VR mailbox command should be sent from coreboot to pcode. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low CQ-DEPEND=CL:329393 Change-Id: Ia3ef4031269ac2d4557bba65de34c41a8d73f89a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3e66903c9017f9d3f45c97b68284f4e1058c03e2 Original-Change-Id: Ie9e370556bb35d02f6bfcfe5cb81dd977fceace1 Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329480 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13983 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12soc/intel/skylake: add option to enable VR specific mailbox cmdRizwan Qureshi
Adding an option to enable VR specific mailbox command. When set, an extra VR mailbox command specifically for the MPS IMPV8 VR will be sent. BUG=chrome-os-partner:48511 BRANCH=None TEST=Verified on glados, clean S0ix entry and exit. IMVP8 power is also pretty low Change-Id: Ia5a23cbb1eca8b463eb7c7c279b74635f1d6b9f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c90a799b51fe35bf184dca6ffce59c89a60f9917 Original-Change-Id: Iffd3fbcb9a15611eefc942529e6cdafba859fb2e Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/329393 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13982 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12vendorcode/intel/fsp/fsp1_1/skylake: update FspUpdVpd.h 1.9.0Aaron Durbin
The previous copy of FspUpdVpd.h was not up to date w.r.t. the FSP release being used for skylake boards. Fix that. BUG=chrome-os-partner:50863 BRANCH=None TEST=Built and booted on chell. Change-Id: I39896c04d35189b0fb2c903eefda4e5b7c57084a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: fd647f354b8d9946b2217751cf1af845f29191b7 Original-Change-Id: I4ad131af6c563c9c33eb2b9207b13617ff24385d Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331290 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13984 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-12mediatek/mt8173: memlayout: Create DRAM DMA region for NOR flash DMA read.Yidi Lin
NOR flash has a hardware limitation that it can't access SRAM region after 4GB mode is enabled. We add a DRAM DMA region after 0x40000000 for NOR flash driver. So that the NOR flash driver can use this region after 4GB mode is enabled. BRANCH=none BUG=chormoe-os-partner:49229 TEST=Boot to kernel on rev4 w/ 2GB ram and rev3 w/ 4GB ram. And check /proc/meminfo. Change-Id: I4a86f0028b26509589ec8d09e2d077920446ece1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: dc61ec55187959101a9e891fe5e93928e9b8176e Original-Change-Id: Ifedc9e2dfba5d294297b3a28134997ac1dd38f94 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327962 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331177 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13989 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: detect sdram size at runtimeYidi Lin
Remove DRAM_SIZE_MB Kconfig setting and use sdram_size_mb() to detect the DRAM size at runtime. BUG=chrome-os-partner:49427 BRANCH=none TEST=Boot to kernel Change-Id: I0c3245db73335fb4f1c89c1debde715fc96ecba7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 00f6f2bbed0e7d23181337b9274191b31e73e223 Original-Change-Id: I409163fe527e966c184f28d7d9bbc809ae2308ed Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com> Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327961 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331176 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13988 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: mmu: update mmu range before DRAM is initialized.Yidi Lin
The DRAM size can not be determined before DRAM is initialized. Since mt8173 only support 2GB and 4GB DRAM models. We map 0x0 to the end of 2GB DRAM address before DRAM is initialized. BRANCH=none BUG=none TEST=boot to kernel Change-Id: I27a00106b0aa91c3dacfcd2bcd9208f08b108dc5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9720e67c86f0d37a08f7c32e900996c75d60288a Original-Change-Id: I87d9c6ac11486decde102b7821f550c2f1a51f1c Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327960 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/331175 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13987 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12Add a driver for the parade ps8640Jitao Shi
BRANCH=none BUG=none TEST=none Change-Id: Icf397ce2ffdaed5048367daf2086c067984fea0a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b5a88793ccfc46af196300791a300be67b70f5b1 Original-Change-Id: I75adf2688c9c8b9a2338f7dee5d0ac10e7181529 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321056 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13981 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: pll: raising the CPU core frequencyYidi Lin
Runs the LITTLE core at highest freqency to speed up the boot time. Set Vproc to 1.125V and set the freqency to 1.6Ghz for backward compatibility. (The highest frequency for the IC before E3 is 1.6Ghz.) BRANCH=none BUG=chrome-os-partner:47422 TEST=flash the bootloader and measure the boottime by cbmem result Change-Id: Id0b906bf34ac534667eb6e8f576e30942ceb923e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 5fc38548d158158f07cded8cfc8ea5a0a7952161 Original-Change-Id: I62af26c13d98211974243100c581abcb5408fd63 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324685 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: add NOR DMA readBayi Cheng
BRANCH=none BUG=none TEST=boot oak to kernel on rev2 Change-Id: I368fcac1cf5e2261d00a34882a7341733ebd0732 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ea0407f7273bc88613bc23a6fc4c41f9cca1adb Original-Change-Id: Ic422e7265fdd35c573d8cd44280a1f7dc163a6db Original-Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/323932 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13979 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12device/i2c: Add i2c_read_bytes() APIJitao Shi
Add multi-bytes read support. BRANCH=none BUG=none TEST=saw edid log and dev screen Change-Id: I106be98e751e2a3b998ccaedb28f71f3c6e18994 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 94ee0b834947e8d971943aa24e61a9353c7b7306 Original-Change-Id: Iac5fe497da92b7d09383e0d6a04d98709aea5b20 Original-Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/325211 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13978 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure USB OC pinsYidi Lin
BRANCH=none BUG=none TEST=none Change-Id: If7244d0050833c676de72106d1c8473dd8f290a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 89356785e66eb6d5b52fdf09933d2d28d9f67a90 Original-Change-Id: I94dda9834da6553795e7f3f65ff267fdcb6b7d47 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321055 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13977 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config USB Hub for rev5Ben Lok
Reset pin of USB Hub is connected to GPIO118, it is low active. Config GPIO118 as GPO and output high. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I630cfd1c1019447736e7e5b286790fead4bdcfb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b4b5cd98d0b3c5d2bab408ecebebc924d1f2b7df Original-Change-Id: I1ea0e1baac3da4d13301307f01bbe51e108298dd Original-Signed-off-by: Ben Lok <ben.lok@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321054 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13976 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config audio for rev5Koro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ibdafa4ffe0baf5231654e67612b7ca59d835b602 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 63fedfec26ba1444934e348ce59609fa88e12de5 Original-Change-Id: Ifbbf8d2b3b6e163481843308c2e3edc4a55f90c6 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319988 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Remove obsolete Rev0 settingKoro Chen
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I65aa87e88cf812fdb490933de1a3b121866a2694 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8f703f7e71ae6ffc0f1ac0e70486d087a28da5ba Original-Change-Id: I8d794464d45ea69f9a46f7ebc505f6ec2127f204 Original-Signed-off-by: Koro Chen <koro.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319987 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13974 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Enable TP_SHIFT_EN for the revisons before 5 onlyYidi Lin
BRANCH=none BUG=none TEST=emerge coreboot Change-Id: Ic46490a56a6a8146b91a055b9ce5d5bb23bc7a49 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 082ce1848bf37bba369fd0dccc4cf3fc83a8a018 Original-Change-Id: I58f009d2fc03cf5a52b4dbd042a92973cde4d035 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320029 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13973 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: da9212 gpio configuration for rev5henryc.chen
BRANCH=none BUG=none TEST=none Change-Id: Ib44a9e8ca94727809e47831228f4742c25a53977 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: da9185c22264440da822aa252c0c5d2aef78b455 Original-Change-Id: I98c2ad757d0cd0e3234e49392091784b43a106e7 Original-Signed-off-by: henryc.chen <henryc.chen@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320028 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13972 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Config PANEL_LCD_POWER_EN for rev5Yidi Lin
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ic2019a1d61cbc5949c1f42346b279ef05f725dfb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: bf13606f01438bc2ea27ecccc6359a7320dc34cc Original-Change-Id: I3fcc403cb7a3429b9673be0e727fc7d8c9d4f556 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320027 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13971 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Configure SPI_LEVEL_ENABLE pin for rev5Yidi Lin
Oak introduces a 1.8V to 3.3V level shifter for EC SPI bus after rev5. BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: I71868b003fc71dee0532033299afc155a9fbec9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 030b478fedf046a7b818696779299c591415fcbd Original-Change-Id: Ibff9705832700867279cb1b39b752b8f5f27cf33 Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320026 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13970 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Update infracfg register mapMilton Chiang
BRANCH=none BUG=none TEST=emerge-oak coreboot Change-Id: Ifdeb686f7695fbefadc15d47e9b0c49b6b35c37d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2404a31dac8c84580424fc01816669b27ddf8617 Original-Change-Id: I831d34b1bce2675caa3da8da7a214f392e561000 Original-Signed-off-by: Milton Chiang <milton.chiange@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/320025 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13969 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize i2c bus timing register for TPM and external buckjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: Id2c3bbb70a1de54a56ee04ecda76178b1bdf1a4d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13108 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: add event logCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: Ifca80705e392ce171ef33bf98ef787e3cd5ffd6b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13104 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I0df2c6d7d1ffac7d443511c3317c142efeb5701e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13101 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Add soc ARM Trusted Firmware supportJimmy Huang
We define a mechanism to pass board specific parameters to BL31. The idea is BL31 doesn't need to have the board revision knowledge, it only needs to process the board specific parameters to initialize and control specific hardware. In this way, we can support different boards with same BL31 binary. [pg: add the code, but don't actually enable the support yet, because it relies on code that still needs to be merged to arm-trusted-firmware.] BRANCH=none BUG=none TEST=booted on oak-rev2 and oak-rev3 boards, and confirmed they got different board arguments in ARM TF Change-Id: I9ea3ce6c8f79dd427be67f30bc940d2038173b81 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 0f9a4a2776110c5ddc113f0d605d4337d5773ace Original-Change-Id: I985d9555238f5ac5385e126479140b772b36bac8 Original-Signed-off-by: Jimmy Huang <jimmy.huang@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292678 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13100 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Provide I2C bus initialization APIjun.gao
BRANCH=none BUG=none TEST=build pass and boot to oak kernel Change-Id: I8aa9ca0fce804cc1682947b7e184781dd5d437f7 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8641689e008c58e909606c225dddb81dc6457ae9 Original-Change-Id: I96ef8a36bc70594097e9df964934b7e3eca5d5f9 Original-Signed-off-by: jun.gao <jun.gao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319031 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13107 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12google/oak: Initialize DRAMPeter Kao
BUG=none TEST=emerge-oak coreboot BRANCH=none Change-Id: I3ed8bad1bdc7d17e334e0136f92a51c8e7ba4e67 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6 Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292692 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13106 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: Add EMI driver, DRAM initializationPeter Kao
BUG=none TEST=emerge-oak coreboot BRANCH=none Change-Id: I6b05898de2d0022e0de7b18f1db3c3e9c06d8135 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b614eeb1bba5660438c214e82225832809caca8e Original-Change-Id: I0f7b0a426dae1548b34114a024c92befdf6002f6 Original-Signed-off-by: Peter Kao <peter.kao@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292692 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13105 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mediatek/mt8173: enable RTC in ramstageCC Ma
BRANCH=none BUG=none TEST=boot to shell on Rev3 Change-Id: I77c5a8aa31ab10d82115a60bdfee1da35707619f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 7d511df7f527ae96c2da01804c62fe98a13fed56 Original-Change-Id: I68ab8be50f210fa17bd731b400a087b150566e3b Original-Signed-off-by: CC Ma <cc.ma@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/303207 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13103 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-12mt8173: add SPI NOR supportmtk05962
BRANCH=none BUG=none TEST=boot oak to kernel on rev1 Change-Id: I0773c81398df445aec16bcfcd0c5a8fe5a588b5c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: ae15c42c2f7d9c2a716e5b6098d85e17279f5eae Original-Change-Id: I65abf810d35ae5e7156cf6f5730117e690183d18 Original-Signed-off-by: mtk05962 <bayi.cheng@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/292693 Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13102 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrccache.c of sandybridge + haswell to commonAlexander Couzens
The sourcecode is 99% the same. Only two lines differ, but not in functionality. Also rename mrccache.c -> mrc_cache.c Tested-on: boot + suspend/resume on x220 Change-Id: I36f79d066336f223b608c70c847ea6ea6e4ad287 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14007 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11northbridge/intel: move mrc_cache definition into a common headerAlexander Couzens
The mrc_cache definition and the struct mrc_container are the same over all intel platforms. Change-Id: I128a4b5693d27ead709325c597ffe68a0cc78bab Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13998 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11spi/SST: fix write support for SST25VF064CAlexander Couzens
The SST25VF064C doesn't support the auto incrementing write which all other supported SST chips support. Allow the chips to select their write method. Change-Id: Ic088d35461a625469ee6973d1267d7dd11963496 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14000 Tested-by: build bot (Jenkins) Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-11nortbridge/sandybridge/mrccache: parse the return code of flash->writeAlexander Couzens
Change-Id: I2738da99e4651598faeaa228fba447d0872e9ded Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/13999 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Train correct receiver in TrainDQSRdWrPos_D_Fam15Timothy Pearson
Change-Id: Ia26950a8297f0a7125c21e995c89a3fc68d9d8a9 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13932 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Consolidate calls to MCT minimum clock setting fetchTimothy Pearson
Change-Id: I4497b0be6ed6c90dbb31e89013feed8ff5ff9071 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13885 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-11nb/amd/mct_ddr3: Require minumum training quality for both read and writeTimothy Pearson
The existing MCT code proceeded to the next DRAM training phase if the minimum lane quality standard passed for either the read or write direction. Ensure that both pass for a given set of delay values before proceeding to the next training phase. Change-Id: I2316ca639f58a23cf64bea56290e9422e02edf1c Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13993 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Set read DQS delay to 1UI before calculating read latencyTimothy Pearson
The AMD Family 15h BKDG rev. 3.14 indicates that the maximum read latency must be calculated prior to DQS position training, however the read latency calculations use read DQS delay values that have not been set prior to DQS position training. Set the read DQS delay values to 1UI (i.e worst case) before calculating the read latency prior to DQS position training. Change-Id: I6ae88c891e92b21dc0ca3c47b8f3d269f83b3204 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13995 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Properly initialize arrays and add bounds checksTimothy Pearson
A couple of arrays were not properly initialized. This did not appear to affect operation of the codebase however it led to some ugly values being displayed when debugging was turned on. Also bounds check an array index; as before this did not appear to affect operation but was a potential point of failure. Change-Id: I243b7197a74aed78ddca808eb3b0f35f1fe9d95a Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13934 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11nb/amd/mct_ddr3: Restore previous DQS delay values on failed loopTimothy Pearson
Change-Id: Iacfcd7f379d09a633973b4c3ef3cbb97e6d1f09f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13931 Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-11soc/intel/apollolake: Avoid hardcoding CAR region size for FSPMAndrey Petrov
Instead of having to supply CAR memory region during compilation time it is possible to determine it in runtime. FSP2.0 blobs carry a copy of UPD structure pre-populated with 'default' values. The default value for StackSize is actually the real value blob needs. Change-Id: I298e07bb12470ce659f63846ab096189138e594f Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14001 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-11arch/x86/smbios: fix length calculation for SMBIOS type 17Iru Cai
Different DIMM modules give different SMBIOS type 17 lengths, so we can't use `meminfo->dimm_cnt*len' for entry struct size, otherwise it'll give a wrong SMBIOS size when two or more different DIMMs are installed on the machine. Change-Id: I0e33853f6aa4b30da547eb433839a397d451a8cf Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/14008 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-11Kconfig: remove COMPRESS_PRERAM_STAGES option from x86Martin Roth
Instead of just defaulting to disabled, remove the option for x86 since it doesn't work there. Change-Id: I2b84b9f866f9231943e573b873c970f420c7c9a5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/14017 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-03-11cbmem: Fix cbmem_add_bootmem()Andrey Petrov
Change 13363 (555d6c2) introduced a bug where cbmem_add_bootmem() was converted to use a new function. Unfortunately instead of passing a pointer, NULL was passed due to type confusion. This change fixes that problem by passing address of stack variable instead of NULL. Change-Id: Ib8e1add3547cda01f71bf1dea14d3e58bdd99730 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/14033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-03-11northbridge/i945/gma: Re-enable NVRAM tft_brightnessAlexander Couzens
Commit 71512b2c (northbridge/i945/gma: fix build error with native graphics init) unintentionally changed the code to ignore the NVRAM setting `tft_brightness`. Revert that hunk to restore the original behavior. Change-Id: Iffdfc5272732bad3476f35ddac1f5a7564270531 Signed-off-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-on: https://review.coreboot.org/14002 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10soc/apollolake: Add memory and reserve MMIO resourcesAndrey Petrov
This adds most important MMIO reserved memory resources, real DRAM memory resources, and some DRAM resources that can not be used as RAM for whatever reason. Change-Id: Id5a80cf18d67ace991e8046fa46c4b7ed47c626a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13360 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10cbmem: Add utility to get memory region occupied by cbmemAlexandru Gagniuc
Change-Id: I8e57c23565f173afc0f4d450579b8bfb35aeb964 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13363 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/intel/apollolake: Avoid UART BAR relocation at ramstageAndrey Petrov
UART bar gets overwritten during resource allocation stage. As result the serial driver ends up using stale BAR so serial output does not work. This driver simply tells resource allocator not to change BAR of UART device. Change-Id: I81f4f04089106c80bea97f0bbaba890df00c8ac5 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13997 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10soc/intel/apollolake: Add ids of internal SoC PCI devicesAndrey Petrov
Change-Id: I6a632ca7d4a19c4973c41bb102f97e0836f27a5e Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13996 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10mainboard/intel/apollolake_rvp: Populate static devicetreeLance Zhao
Add configuration in accordance to "PCI Configuration Matrix". Change-Id: If1f60486d802a6595aed03d95e0d20fc7db21bd2 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13926 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10soc/intel/apollolake: Add chip initializationAndrey Petrov
Change-Id: I54532b71c7649f7eeccbb2213b31418cfdbfb00c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13911 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-10soc/apollolake: Enable all CPU cores using the parallel MP libRavi Sarawadi
This is the minimal setup needed to get all CPU cores enabled. That includes sending an IPI to APs and setting up MTRRs. Microcode updates are not performed for two reasons: * CSE (Converged Security Engine) upgrades the microcode before releasing reset * Microcode update files are not available at this point in time Change-Id: Ia1115983696b0906fb4cefcbe1bbe4fc100751ca Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13910 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-10src/lib/trace.c: Make address size genericMartin Roth
On platforms that didn't use 32-bit addresses, enabling the CONFIG_TRACE option (Trace function calls) would break the build due to a cast from a pointer of a different size. This fixes this warning: src/lib/trace.c:29:58: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] Change-Id: Iaab13c1891b6af7559ea6982ecc6e74c09dd0395 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13962 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-10cpu/via/c7: Don't manually include udelay_io.cStefan Reinauer
Use UDELAY_IO selected by CPU_VIA_C7, so no manual inclusion (or secondary UDELAY implementation) is needed Change-Id: Ib086a1bfe8ffca5757bf553c5a62a45da7a410b6 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13782 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10northbridge/intel/i440bx: Unify UDELAY selectionStefan Reinauer
Instead of manually including udelay_io.c in each romstage, select UDELAY_IO for all i440BX boards in the chipset. Change-Id: I411191927f3fba1d0749edcf79378e8013fb195a Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13781 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-10mainboards/google/auron_paine: add new portGeorg Wicherski
Add a port of Auron_Paine based on upstream Auron and the Auron_Paine code originally from commit bd61dfd in Google branch firmware-paine-6301.58.B . Change-Id: I3a1faec3195a81bb3a6496b8bd610fc8a89e66aa Signed-off-by: Georg Wicherski <gwicherski@gmail.com> Reviewed-on: https://review.coreboot.org/11907 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-09mainboard/intel/apollolake_rvp: Add memory training configLance Zhao
Pass memory training information to MemoryInit, so memory training can be completed. Change-Id: Icb1bf308b77a1c8481313c259c3f3dd1d8379863 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-09Makefile: Add build-time overlap check for programs loaded after corebootJulius Werner
On non-x86 platforms, coreboot uses the memlayout.ld mechanism to statically allocate the different memory regions it needs and guarantees at build time that there are no dangerous overlaps between them. At the end of its (ramstage) execution, however, it usually loads a payload (and possibly other platform-specific components) that is not integrated into the coreboot build system and therefore cannot provide the same overlap guarantees through memlayout.ld. This creates a dangerous memory hazard where a new component could be loaded over memory areas that are still in use by the code-loading ramstage and lead to arbitrary memory corruption bugs. This patch fills this gap in our build-time correctness guarantees by adding the necessary checks as a new intermediate Makefile target on route to assembling the final image. It will parse the memory footprint information of the payload (and other platform-specific post-ramstage components) from CBFS and compare it to a list of memory areas known to be still in use during late ramstage, generating a build failure in case of a possible hazard. BUG=chrome-os-partner:48008 TEST=Built Oak while moving critical regions in the way of BL31 or the payload, observing the desired build-time errors. Built Nyan, Jerry and Falco without issues for good measure. Change-Id: I3ebd2c1caa4df959421265e26f9cab2c54909b68 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13949 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-09northbridge/intel/gm45: Use TSC for ramstage timer per defaultStefan Reinauer
This is a step towards isolating the timer drivers. Change-Id: I4c9349054be0cf520cd4407be9fb393b664223a4 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13922 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-09drivers/intel/fsp2_0: remove struct resource usageAaron Durbin
There's no need to use a struct resource type for fsp_find_reserved_memory(). struct resource is mainly associated with a device and that memory is added to cbmem after memory init. Other uses ins FSP 2.0 just use struct range_entry. Use that instead for consistency. Change-Id: Id7d39da1c2e23f97cdaafd7f5d281cefa6fee543 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13960 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09drivers/intel/fsp2_0: add TODOs to fix deficienciesAaron Durbin
The FSP 2.0 implementation doesn't handle FSP modules for SoCs that are required to be XIP. There is no notion of "loading" in that situation where one should be copying anything anywhere. Additionally, the loading code does not handle overlaps within the current running program which is doing the loading. Change-Id: Ide145581f1dd84efb73a28ae51b3313183fa127a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13959 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09drivers/intel/fsp2_0: don't leak resourcesAaron Durbin
rdev_mmap() was not followed by rdev_munmap(), thus leaking resources. Fix the leak. Change-Id: Ibdd30d6b64616038013b4bb748f2ad4a98db5472 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13958 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09soc/intel/apollolake: correct comment to reference top of CARAaron Durbin
The memory provided to MemoryInit() for its own usage is at the top of the CAR region. Change-Id: I8685b5ab138182e24123b14cac6f7b32e5e784d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13957 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-09lib/memrange: add function to initialize range_entryAaron Durbin
In order to enforce the semantics of struct range_entry provide an init function, range_entry_init(), which performs the field initialization to adhere to the internal struture's assumptions. Change-Id: I24b9296e5bcf4775974c9a8d6326717608190215 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13956 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-08x86 chipsets: utilize x86_setup_mtrrs_with_detect()Aaron Durbin
For all the chipsets which were performing the following sequence: x86_setup_fixed_mtrrs(); x86_setup_var_mtrrs(cpuid_eax(0x80000008) & 0xff, 2); Replace that with x86_setup_mtrrs_with_detect() since it is equivalent. Change-Id: I9f362dbf38942d675f615d22b9e5770ce65e5a08 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13936 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-08nyan: Fix timestamps and CBFS SPI integrationJulius Werner
Nyan is an old board that was committed before several core code modernizations to timestamp and CBFS code. Not all of those later patches were correctly integrated with old boards like this, and the core code has evolved to a point where it doesn't actually boot anymore. This patch fixes that issue and brings the Nyan boards more in line with how later ARM platforms look. BRANCH=None BUG=None TEST=My Blaze boots again. Change-Id: I3277a2f59ad8ed47063f7f6b556685313b1446f8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 6a1679e342a7adc2b2371b6e3f69a898a7a5c717 Original-Change-Id: I2a0a2abbd79b4b5f756125dcbb6cbd9441016d4e Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/328543 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/13832 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-03-08mainboard/skylake: Include WRDD method in WIFI ACPI deviceDuncan Laurie
Include the code to add the WRDD method to the existing WiFi Device in the mainboard ACPI code. BUG=chrome-os-partner:50516 BRANCH=glados TEST=boot on chell with 'region'='us' in VPD and see that it is properly read out by calling WRDD method on the WiFi device. Compile for the other platforms that are modified. Change-Id: Ibcff7585744071ba9018d0ba50e274e63365b150 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: b74bb553415f7ce224ddcb0c2c5ae509b8fed516 Original-Change-Id: Ieb24e0e64974ee3686d14a234e148f5d07fc8b12 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329296 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13840 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08skylake: Add and fill out CID1 NVS fieldDuncan Laurie
Add a country identifier field to NVS and populate it with the call to wifi_regulatory_domain() which will (by default) do a lookup for the 'region' identifier in VPD on a Chrome OS device. BUG=chrome-os-partner:50516 BRANCH=glados TEST=build and boot on chell Change-Id: Ie7531848e620095732772c22156a85b7f8a6df5c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: dafdb3760a0302e3effdc0e83977c1bfd5c9d3b2 Original-Change-Id: Ic83ab008045a469d0e0756f7e4d42f1b3894c529 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329295 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13839 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08intel/wifi: Add WRDD ACPI methodDuncan Laurie
Add an ACPI file containing a generic WRDD method that is used by Intel wireless kernel drivers to determine the country code to be used for regulatory domain configuration of the wireless radios. This requires an NVS variable called 'CID1' to provide an ISO-3166-2 alpha-2 country code or it will just return 0 instead. This is implemented as a bare method because this needs to be included directly into the wifi device that is defined by the mainboard as it may have board-specific settings like _PRW that need to be provided as well. BUG=chrome-os-partner:50516 BRANCH=glados TEST=boot on chell with 'region'='us' in VPD and see that it is properly read out by calling WRDD method on the WiFi device. Change-Id: I27a5e27f65d05ff62a0e79a87a32c1ef0c5d0ef3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 2da0cf76ca3cc5e3dfbc4a0859733523de780cf5 Original-Change-Id: I9d83c3938cceafc77ef8747a5c47f586ee84437e Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329294 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13838 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08Chromeos: Modify wifi_regulatory_domain to use "region" key in VPDHuang, Huki
In ChromeOS VPD spec the right name is "region". Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://chromium-review.googlesource.com/322851 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: mukesh agrawal <quiche@chromium.org> (cherry picked from commit 21ea0663e7f3ffe3aaea6b6ce0e1216fcd9ca23e) BUG=chrome-os-partner:50516 BRANCH=glados TEST=build and boot on chell Change-Id: I4ba9a9c65af3732fa263030640495ab5bea91d1f Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 848f18e731eb11dd3037d12607d7364f95e64e34 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: Ib96036f9cd76449f170af5c3dd6ef6e8e91ded94 Original-Reviewed-on: https://chromium-review.googlesource.com/329293 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13837 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08lib: Implement framework for retrieving WiFi regulatory domainFelix Durairaj
Platforms that need to initialize WRDD package with the regulatory domain information should implement function wifi_regulatory_domain. A weak implementation is provided here. Signed-off-by: fdurairx <felixx.durairaj@intel.com> Reviewed-on: https://chromium-review.googlesource.com/314384 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Commit-Queue: Hannah Williams <hannah.williams@intel.com> Tested-by: Hannah Williams <hannah.williams@intel.com> (cherry picked from commit c25d7221679d1fab830d614eeabfa3436bce6ac1) BUG=chrome-os-partner:50516 BRANCH=glados TEST=build and boot on chell Change-Id: I1cbdf4e940b009c74ee8ed8f4fca85f4f5c943b2 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 27bba336e620a2d3d331e350d4f46164e337fabc Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Change-Id: I84e2acd748856437b40bbf997bf23f158c711712 Original-Reviewed-on: https://chromium-review.googlesource.com/329291 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13836 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08soc/intel/quark: Set the UPD values for MemoryInitLee Leahy
Set the UPD values for MemoryInit. * Update the FspUpdVpd.h file which specifies the parameters for MemoryInit. * Add the necessary values to chip.h to enable values to come from the mainboard's devicetree.cb file * Add the parameters to the mainboard's devicetree.cb file * Locate the platform configuration database file (pdat.bin) * Copy the data values from the chip_info structure into the UPDs * Display the UPD values Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_DISPLAY_UPD_DATA=y * Testing successful when the UPD data is displayed before the call to MemoryInit Change-Id: Ic64f3d97eb43ea42d9b149769fc96bf78bf804f5 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13896 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-08soc/intel/apollolake: Add cbmem_top() implementationAndrey Petrov
On Apollolake CPU memory mapping is similar to previous SoC, and we place CBMEM right under TSEG. Change-Id: I606f690449ba98af6e9fc3074d677c7287892164 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13883 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08Kconfig: Remove unneeded UDELAY_IO redeclarationStefan Reinauer
UDELAY_IO is defined in src/cpu/x86/Kconfig, so it does not need to be redefined in the AMD cpu or board Kconfigs. Change-Id: I6676881c0ba5d1634230fc3d3c37da3afbc6fceb Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13780 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08cpu/x86/mtrr: add helper function to detect variable MTRRsAaron Durbin
The current MTRR API doesn't allow one to detect variable MTRRs along with handling fixed MTRRs in one function call. Therefore, add x86_setup_mtrrs_with_detect() to perform the same actions as x86_setup_mtrrs() but always do the dynamic detection. Change-Id: I443909691afa28ce11882e2beab12e836e5bcb3d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13935 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-03-08soc/intel/quark: Add the UPD support for SiliconInitLee Leahy
Add the routines to handle the UPDs for SiliconInit. Currently no support is required. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_DISPLAY_UPD_DATA=y * Testing successful if coreboot calls SiliconInit Change-Id: I5176ab4b1ea7681c3095f102a86f4b614366c0fc Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13897 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-08cpu/x86: Sort some Kconfig optionsStefan Reinauer
Change-Id: I25ea327ed151e18ccb5d13626d44925d2a253d08 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/10012 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-08soc/intel/apollolake: Enable using FSP 2.0 driverAndrey Petrov
Change-Id: I5d50fecca51e89aed597e1cfafbcd4515d4d4388 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13806 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08soc/intel/apollolake: Add romstage that calls FSP2.0 driverAndrey Petrov
This romstage is minimalistic. Its goal is to set up some BARs that FSP expects to be set and then invoke FSP driver to train memory. Change-Id: I3fa56aafe99cf6cf062a46dece3a0febeafdbfad Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13805 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 12:22:21 +0000