Age | Commit message (Collapse) | Author |
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I9563a7f6d37937a4951c5053dcfee140579098e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67968
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I4721d24aecd53c51c66c7d448b7c331d50a09712
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ibc257c2306351614669bd25ac83c24475f80fc6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This is a vboot feature, not a ChromeOS one, and unless selected by
vboot, compilation will fail in the non-ChromeOS + vboot build case.
TEST=build/boot skyrim w/vboot, w/o ChromeOS
Change-Id: If9a5343907457bf3319f045262fdddf7eae2f1cb
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67995
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a vboot feature, not a ChromeOS one, and unless selected by
vboot, compilation will fail in the non-ChromeOS + vboot build case.
TEST=build/boot guybrush w/vboot, w/o ChromeOS
Change-Id: I3108bcc8dfeacd99c9f5d36bd915d590292fef00
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67994
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This area relates to storing of AP RO verification information.
CONFIG_VBOOT_GSCVD is enabled by default for TPM_GOOGLE_TI50 and
guybrush is using TPM_GOOGLE_CR50.
Signed PSP verstage has the FMAP embedded. Since CB:67376 shifted the
RO section up by 8K, they were misaligned. Hence marking this area as
unused instead of removing the same to work around ChromeOS
infrastructure shortcoming.
Signed-off-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Change-Id: Id852e5b5c1f777992a96a75143757f4df8d975b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67901
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It turns out that one can use Kconfig options to specify values for
devicetree options, as long as the resulting expression is a compile
time constant. Use this to configure SaGv for Atlas: enable it by
default, but allow SaGv to be disabled manually for convenience when
testing. Enabling SaGv makes MRC train the RAM multiple times, which
takes a significant amount of time.
For further info on SAGV on ADL, please refer to Intel Doc 655258
(Alder Lake Datasheet) section 5.1.3.2.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Change-Id: I3c6ac25d414122c408f2348d12dba8dce909e567
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For further info on SATA test mode, please refer to this doc:
https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/sata-mqst-setup-paper.pdf
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I6ef79fc5723348d5fd10b2ac0847191fa4f37f41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67410
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also add missing device/mmio.h include.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I03af0772c735cdc7a4e221770dc528724baa7523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67983
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Also add missing device/mmio.h include.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0f3f7ea36896c8e55c62acd93fe8fc4fb7c74b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67982
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id8573217d3db5c9d9b042bf1a015366713d508c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67981
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Also include arch/mmio via device/mmio.h and not directly to have the
[read,write][8,16,32]p helper functions available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c6f5c73b41546b304f16994d517ed15dbb555f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67980
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6e743068dfcf9d393096f775759181af1a1c470d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67979
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8445f209e43366b43b9c4750bc5f074f6d4144aa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67978
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6372741284ad5f0453f0d4dfd8ebaddd7385f8ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67977
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable DPTC and No Battery Mode for Skyrim. This allows Skyrim to boot
without a battery or with a critically low battery.
DPTC remains disabled for the Winterhold and Morthal variants until it
can be tested on those boards.
BRANCH=none
BUG=b:217911928
TEST=Boot skyrim with low & no battery
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Icc4084476916cc8e142908d8e58baf7124568b8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67211
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change the TPM I2C freqeuncy to 1 MHz for nivviks and nereid, and in
the baseboard. Other nissa devices will be changed after verification.
This saves 11 ms of boot time on nivviks and nereid.
400 kHz:
504:finished TPM initialization 272,304 (35,730)
...
512:finished TPM PCR extend 526,250 (23,729)
513:starting locking TPM 526,250 (0)
514:finished locking TPM 535,106 (8,855)
6:end of verified boot 543,927 (8,821)
1 MHz:
504:finished TPM initialization 266,293 (30,747)
...
512:finished TPM PCR extend 513,711 (20,108)
513:starting locking TPM 513,711 (0)
514:finished locking TPM 521,311 (7,599)
6:end of verified boot 528,893 (7,581)
BUG=b:249201598
TEST=On nivviks and nereid, all timing requirements in the spec are met.
Frequencies:
nivviks - 972.01 kHz
nereid - 968.99 kHz
Change-Id: I9dd783527d4215ed7d79d69853a1f321ea2d8a28
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Disable the external 1.05v VR in S0 as a fix for the
display flicker issue in ADL-N.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033, b:245970842
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: If9f40e6c37e80caceb726a8e5f4d4b14dc479858
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67654
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Disable the external 1.05v VR in S0 as a fix for the
Display flicker issue in ADL-N.
Please refer the Doc with ID 742988 for more details.
BUG=b:248249033, b:245970842
TEST=Verified that the display flicker issue is fixed.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: Iaa53bfd99a550b2cffcdaee640ee3a429e93aef7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Commit c7204b5a4 [mb/google/guybrush: Enable backlight in the OS]
disabled the GPIO for the display backlight in favor of using ACPI
to enable it, but this breaks display output for payloads which do
not/can not enable the backlight GPIO themselves (edk2, grub, SeaBIOS).
Re-enable the GPIO for display backlight so that payloads other than
depthcharge work properly.
TEST=build/boot google/dewatt with Tianocore payload, verify payload
display visible.
Change-Id: I2519d779954ed89486045aa7de0b18f1c31a4374
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Example for Alder Lake PTT:
Handle 0x004C, DMI type 43, 31 bytes
TPM Device
Vendor ID: INTC
Specification Version: 2.0
Firmware Revision: 600.18
Description: Intel iTPM
Characteristics:
TPM Device characteristics not supported
OEM-specific Information: 0x00000000
TEST=Execute dmidecode and see the type 43 is populated with PTT
on MSI PRO Z690-A WIFI DDR4
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I05289f98969bd431017aff1aa77be5806d6f1838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Based on DMTF SMBIOS Specification 3.1.0.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia2db29f8bc4cfbc6648bb2cabad074d9ea583ca9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ie564d080955097b416943e772de6c62708ce5764
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
use is_enabled_cpu() on cycles over device list to check
whether the current device is enabled cpu.
TEST: compile test and qemu run successfully with coreinfo
payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: If64bd18f006b6f5fecef4f606c1df7d3a4d42883
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67797
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add function defs and prototypes of functions checking whether
a device is {a cpu,an enabled cpu}
TEST: compile test and qemu executed successfully with
coreinfo payload
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: Iabc0e59d604ae4572921518a8dad47dc3d149f81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ic0361e5d928c24cfe7dc0a8b0385fbe73d906b15
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62365
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Petr Cvek <petrcvekcz@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Fix the warning below when building GA-945GCM-S2L with 64-bit:
src/arch/x86/idt.S:216: Warning: no instruction mnemonic suffix given and no register operands; using default for `iret'
Change-Id: Ibbc106714e25293951a71d84fea0a660f41f9c02
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch de-selects EC software sync config and enable early
EC Software Sync.
BUG=b:248775521
TEST=Able to perform EC sync on Google/Rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6bf8018e8a3fd06bb98c82a27d12883fc8d3a5db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Rename so table more indicative of when GPIOs are set, and so it can
be used for more than just setting PCIe GPIOs.
Rename the getter function to match.
Change-Id: I285602209072247895c2cb0830f3faf675328757
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Icebf7e11736929389227063039575a4c5ecf3840
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67809
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch adds ACPI configurations of 8MP YHUX and 2MP CJFKF28-1
as world- and user-facing cameras of Rex.
BUG=b:246413264
TEST=Verified world- and user-facing cameras using Chrome Camera App on
Google/rex device.
Signed-off-by: Daniel Kang <daniel.h.kang@intel.com>
Change-Id: Iaaa16e491a66500606b3a9eb1d87f396641778e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ib2c1738b7b6a6db1fa57ea34fb50588388140a51
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Ia0c4fd6d20c92caea379ef02e020ab9294ed0ffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
According intel Doc#634254 and Doc#608715
PS2/PS1 cross point = 5
PS1/PS0 cross point = 10
PS2 cutoff = 1.4*(PS2/PS1 cross point) = 7
1.3 is better magnification, it obtain by test
PS1 cutoff = 1.3*(PS1/PS0 cross point) = 13
BUG=b:241850120
BRANCH=brya
TEST='FW_NAME=vell emerge-brya coreboot'
Change-Id: I83e9682004e2c3644ad4a5565e6ab85be48ba22f
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Xivu uses PCIE WLAN, so disable the CNVi WLAN/BT.
BUG=b:247120749
TEST=Boot to OS on xivu and check that WLAN/BT still works.
Change-Id: I968d383278bd50268d899cff82067ceb7c3ba5ed
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Ben Kao <ben.kao@intel.com>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: I17db734784ce96cdf5e0486dc2ad057d73bfb15f
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67804
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Rather than duplicating the entire set of GPIOs from the baseboard, use
the variant_override_gpio_table() method like all other octopus
variants do.
TEST=build/boot ampton, dump GPIOs and verify unchanged.
Change-Id: I36aa25bbee7c21a51d9fdd40405f492082455d9c
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67803
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updated reset.h header file path and sorted alphabetically
BUG=b:236990316
TEST=Validated on qualcomm sc7180 development board.
Signed-off-by: Venkat Thogaru <quic_thogaru@quicinc.com>
Change-Id: Ibf92df160a6f8ba588310508812a5601e68a887e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Add support for the following two new memory parts to support a new
SKU that has two memory options that brya0 does not have:
MT53E2G32D4NQ-046 WT:C
MT53E512M32D1NP-046 WT:B
BUG=b:248126749
TEST="emerge-brya coreboot chromeos-bootimage", flash a skolas with
an image-brya0.serial.bin and verify it boots successfully to kernel.
Change-Id: I28667918e5a183339febdc054465effeac8bddbe
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67879
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Having to use a runtime configurable option backend like CMOS just to
specify the value of the "fn_ctrl_swap" option is annoying. Introduce
a new Kconfig option to allow specifying the fallback value, which is
only used when the option backend cannot provide a value.
Change-Id: I00bb3cd60c443fc0c8adb82e8e0c436dfc5de24b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67836
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: I11814016d654bc2c2e6d24b3d18fb30d5b843fe9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Id1e1a67608454466dc65bf4c4985cf4eba84c97d
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Ib8439e664defeafd2d08cffb74c997ab69230231
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: Iaa3c9404919fd6c43596d7b27cfab43a1a5b0b21
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Use just one function to get the chipset powerstate and add an argument
to specify the powerstate claimer {RTC,ELOG,WAKE} and adjust the
failure log accordingly.
TEST: compile tested and qemu emulation successfully run
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Change-Id: I8addc0b05f9e360afc52091c4bb731341d7213cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The current IPU ES entry value is always set to true for ADL-N and
kernel picks the ES version of the main IPU FW even for the production
bootloader but loading is not successful due to the authentication
failure.
Alderlake-N silicon has the same CPU id for all the SKU's and
also the production binaries are backward compatible with ES parts.
This change removes the IPU ES support ACPI entry since the
kernel needs to load the production IPU main firmware on both the
ES/QS parts.
BUG=b:248249032
TEST=Verify the Camera functionality by enabling the IPU secure mode
on ADL-N variants with both ES/QS silicon.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I75b222e6f2b1ccdc5b6c448eb60afff3c1da3a8b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
This patch selects the SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES to allocate
TBT/USB4 root port resources for PCIe tunneling.
BUG=b:248328015
TEST=Built image and verified TBT/USB4 tunneling functions on Rex.
Change-Id: I69f4d26bb7b3d74dbda068add284a69f1bbeff40
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67781
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In order that GPP_H13 not use the GPIO override programming from its
baseboard (brya), explicitly program GPP_H13 to a output HIGH instead
of relying on the 20K pullup from the baseboard.
BUG=b:240617195
TEST=SSD still functional
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iddedebe2d5cfc0123932b14980d1268bcb147703
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
The next rev of this board will move the dGPU PEXVDD enable pin from
GPP_E10 to GPP_F12. This patch handles both the old and newer revisions
by using an ACPI Name to hold the GPIO # for PEXVDD enable. It also
cleans up the GPIO handling a little bit between board revs.
BUG=b:242752623
TEST=dGPU is functional and power sequencing tests still pass on board
rev 2
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Icc7968777f86ab07561b0a861b7d22ec714d1c34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67765
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
On Banshee, when the privacy switch is toggled the camera is
disconnected. Which means that we will never be able to tell the user
that the privacy switch is enabled when the camera is on, making the
virtual control unusable.
Remove the description.
BUG=b:248219472
BRANCH=firmware-brya-14505.B
TEST=none
Change-Id: I1a241bd889c0c1aae039510a0620748b2f7a6806
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67773
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Modify GXTP7863 generic.irq to generic.irq_gpio.
BUG=b:245082617
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Iaf6cc6010132d5b33b06909ceb1069115a911b48
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67771
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The headers added are generated as per FSP v3361.03
In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake
fsp headers can be deleted and Raptor Lake soc will also use headers
from alderlake/ folder.
BUG=b:247855492
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: I267a0aefca18492bcbcfbf7acbe271887f0a39cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Issue:
Camera APP is not functional after CB:67434 applied.
Root cause and solution:
SCP hardware needs to access H264 encoder registers, so we need to
remove the DEVAPC protection of H264 encoder for SCP.
BUG=b:247743696
TEST=camera APP is functional.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: I95946346018bff6a8f2dc02b1ff3e24ad079fc90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67787
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This reverts commit 1a8eb6c02103727431ac1ea23f4f507e49f3cde7.
Reason for revert: migrating to the 32MB AP Firmware hence, need to
revert this CL.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibea1ad0cff008f9391cbda9e51899557b1e9c979
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Replace nodeid() function in cpu/x86/smm/smihandler.c with calling
lapicid() from include/cpu/x86/lapic.h.
TEST=Timeless build for lenovo/g505s which includes this file in the
build results in identical firmware image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I336ca9888e24e4d6f10a81cc4f3760c9d7c8f4bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I599e26a40ab584232614440612e95c91a698df27
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Instead of defining NUM_FIXED_MTRRS in both cpu/x86/mp_init.h and
cpu/x86/mtrr/mtrr.c in two different ways that will evaluate to the same
value, define it once in include/cpu/x86/mtrr.h which is included in
both C files.
TEST=Timeless build for amd/mandolin results in identical firmware image
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71cec61e22f5ce76baef21344c7427be29f193f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The current MRC cache update process is slow (28 ms on nissa), because
cbmem is not cached in romstage. Specifically, the new MRC data returned
by the FSP is stored in the FSP reserved memory in cbmem, so operations
on the new data (computing the checksum, comparing to the old data) are
slow.
Replace the data checksum in the MRC header with a hash, and compare
hashes instead of comparing the full data. This has two benefits:
1. The xxhash function is faster than computing an IP checksum (4 ms vs
14 ms on uncached data on nissa).
2. There's no need to memcmp() the full MRC data, which takes 14 ms on
nissa.
Before:
550:starting to load ChromeOS VPD 867,930 (4,664)
3:after RAM initialization 896,020 (28,090)
4:end of romstage 906,274 (10,254)
After:
550:starting to load ChromeOS VPD 864,820 (4,649)
3:after RAM initialization 869,652 (4,831)
4:end of romstage 879,909 (10,257)
BUG=b:242667207
TEST=Check that MRC caching still works as expected on nissa. Corrupt
the MRC cache and check that memory is retrained.
Change-Id: I1b7848d1d05e555b61e0f1cb605550dfe3449c6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67670
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Recently published Intel CedarIslandFSP binary contains PE images in
FSP-M and FSP-S. This causes coreboot boot hang on DeltaLake servers.
PI spec PI_Spec_1_7_final_Jan_2019 on uefi.org talks about FV files
requiring to support SECTION_PE32 sections and FSP specification
states that FSP images are created in alignment with PI specification.
FSP images are relocated at build time and run time using the func
fsp_component_relocate. That code only supported TE image relocation
so far.
The change required to add support for pe_relocate in fsp-relocate.c
I had to move a few functions to top of file as they need to be used
by pe_relocate but were placed below the te_relocate function. I chose
to place pe_relocate function next to te_relocate.
The code supports PE32 format, not PE32+, at this time.
Links for PE and FSP specs are provided below for reference.
Link= https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/fsp-architecture-spec-v2.pdf
Link= https://uefi.org/sites/default/files/resources/PI_Spec_1_7_final_Jan_2019.pdf
TESTED=
This code is tested with FSP version 33A for DeltaLake boot which has
FSP-M and FSP-S as PE32 sections. This FSP version does not boot on
DeltaLake without this change.
Change-Id: I01e2c123d74f735a647b994aa66419c9796f193e
Signed-off-by: Eddie Sharma <aeddiesharma@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66819
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nathaniel L Desimone <nathaniel.l.desimone@intel.com>
|
|
Instead of redefining the register address in smihandler.c, use the
existing definitions from include/cpu/x86/lapic_def.h.
TEST=Timeless build for lenovo/g505s which includes this file in the
build results in identical firmware image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id22f9b5ce53c7bced6bbcc3f5026d4c793b34f78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67776
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The timer_sched_callback function signature was changed in timer.h as
part of commit d522f38c7bfccdc4af71bcad133aec20096f3f6c (timer: Change
timer util functions to 64-bit) but the implementation was not updated
to match.
TEST=Enable timer queue and build
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ie00b027790131f42bd79fbc6ea400a056e67949b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67767
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
'Mendocino' was an embargoed name and could previously not be used.
Update references for consistency with the correct naming convention.
BUG=b:245727030
TEST=builds and boots to kernel
Cq-Depend: chrome-internal:4878294
Cq-Depend: chromium:3763392
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic0248a872dfc92486658aa9bd92bed755dbf59d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67750
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add new PSP svc call to pass psp firmware hash table to the PSP.
psp_verstage will verify hash table and then pass them to the PSP.
The PSP will check if signed firmware contents match these hashes.
This will prevent anyone replacing signed firmware in the RW region.
BUG=b:203597980
TEST=Build and boot to OS in Skyrim.
Change-Id: I512d359967eae925098973e90250111d6f59dd39
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67259
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BIOS_ERR is inappropriate since the init message is informational.
Use BIOS_INFO instead.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I6fc15291a6d177a1b9e258d08e165224e5e10b32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67733
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
EN_PP3300_EMMC has be changed to GPP_A21 for DP++ and it based on Moli GPIO Table_20220803.xlsx, so update enable_gpio for emmc_rtd3 by board_ver.
BUG=b:241370405
TEST=emerge-brask coreboot
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I129706861fd1fcf061371ce94352331ef44359d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add the gma-mainboard.ads for display output definition and enable the
libgfxinit usage in mainboard Kconfig.
Change-Id: I7e7a44736a8136b5320821e744134c7d64c7f1b4
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67683
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Guard sa_lock_pam with PAM0_REGISTER so it doesn't run on platforms
that don't select this.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I5055d09c634851e9f869ab0b67a7bcab130f928c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66492
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SOC_INTEL_COMMON_PCH_CLIENT which is specific to Apollo
Lake. This is used to select the options that Apollo Lake
requires, without the ones specific to a PCH as Apollo Lake
doesn't have a PCH.
This change also enables SOC_INTEL_COMMON_PCH_LOCKDOWN for
Apollo Lake.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I084a05f904a19f3b7e9a071636659670aa45bf3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I07d5aaac9c05986e8a952c7e670d002d864e18d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67170
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently the `pch_pirq_init()` function in lpc_lib.c will program
PIRQ IRQs for all PCI devices discovered during enumeration. This
may not be correct for all devices, and causes strange behavior
with the Nvidia dGPU; it will start out with IRQ 11 and then after
a suspend/resume cycle, it will get programmed back to 16, so the
Linux kernel must be doing some IRQ sanitization at some point.
To fix this anomaly, explicitly program the IRQ to 16 (which we
know is what IRQ it will eventually take).
BUG=b:243972575
TEST=`lspci -vvv -s1:00.0|grep IRQ` shows IRQ 16 is programmed
at boot and stays consistent after suspend/resume.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I66ca3701c4c2fe5359621023b1fd45f8afd3b745
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67746
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Nvidia, the GC6 flag (DFEN) should not get cleared after
a successful GC6 entry; the kernel driver will not re-inform ACPI
that the exit should be GC6 exit as well.
BUG=b:243888246
BRANCH=brya
TEST=tested by Nvidia
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I220795928d03f269de48278ea0ab57de7253fad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67745
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The hatch and puff baseboards have diverged enough to where it makes
more sense to split them into separate boards. Copy the mb/google/hatch
directory into a new dir 'puff' and strip out all boards and items
related to the hatch baseboard. Remove all puff-related items from the
original hatch directory. Clean up and alphabetize Kconfig selections.
Test: build and boot akemi hatch variant and wyvern puff variant.
Change-Id: I8c7350f3afcff3ddefc6fa14054a3f9257568cd3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62970
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The fast SPI driver reports the BIOS window as reserved so that the OS
is aware of this region. Now that platforms which supports an extended
BIOS window are added to this driver, add the extended range as reserved
as well if it is enabled. And since this is now handled in the SPI
driver itself, remove the extended BIOS region reporting from
common systemagent code.
Change-Id: Ib5c735bffcb389be07c876d7b5b2d88c545a0b03
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67529
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There are two classes of SPI controllers on Intel chipsets:
* generic usable SPI controllers
* SPI controller hosting the BIOS flash (fast SPI controller)
While the first class can be used for generic peripheral attachment the
second class mostly controls the BIOS flash and a TPM device (if
enabled). The generic SPI driver is not fully applicable to the fast SPI
controller. In addition, the fast SPI controller reports the reserved
MMIO range used for the BIOS flash mapping so that the OS is aware of
this range.
This patch moves the fast SPI controller of all known SoCs to the
fast SPI driver in common code. In addition, the PCI device for the
fast SPI controller is removed from the function 'spi_soc_devfn_to_bus'
as this is a callback of the generic SPI driver.
Change-Id: Ia881c1d274acdcf7f042dd8284048a7dd018a84b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67173
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update header files for FSP for Meteor Lake platform to
version 2344_00, previous version being 2304_01.
FSPM:
1. Address offset changes
FSPS:
1. Deprecated CstateLatencyControlTimeUnit UPDs
2. Deprecated HybridStorageMode
3.Address offset changes
BUG=b:245167089
TEST=emerge-rex intel-mtlfsp
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Iaee5c66811c340d12921ff9247461df36de4739a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable early initialization of the PTN3460 DP-to-LVDS bridge on this
board in order to allow showing the bootsplash screen at coreboot
runtime.
Change-Id: Ib1b727cef5fb8bea2d6d6c9896ad0107caeea51a
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67682
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create Kconfig options and boot state machine callback in ramstage for
an early initialization of the PTN3460 DP-to-LVDS bridge. This allows
showing the bootsplash screen on mainboards utilizing this chip during
the PCI device enumeration.
BUG=none
TEST=Select PTN3460_EARLY_INIT config switch in mainboard Kconfig and
check the log for "Attempting PTN3460 early init" message. If the
board (e.g. siemens/mc_apl7 in this case) is also configured for
showing the bootsplash logo, it should be now visible.
Change-Id: I5424d062b3fb63c78cfced3971376353be11c504
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67681
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Uwe Poeche <uwe.poeche@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All cherry boards (tomato, dojo) share the same SKU ID encoding, in the
sense that a device has NVMe storage if and only if the BIT(1) of SKU ID
is set (otherwise eMMC). Therefore, instead of hard coding the list of
NVMe (PCIe) SKU IDs, we check the BIT(1) to decide whether to initialize
PCIe.
In addition, in preparation for UFS devices coming in the future,
reserve BIT(3) (which is unset for all of current SKUs) for them.
BUG=b:237953117, b:233327674
TEST=emerge-cherry coreboot
BRANCH=cherry
Change-Id: I9b30338645a87f29f96a249808b90f1ec16f82df
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
CB:63475 inadvertently disabled the STM by moving its load point
off of the MSEG boundry, which is a hardware requirement. In
addition, the BIOS resource list cannot be located within the
MSEG. This patch fixes the issue by moving the STM load point
to the MSEG boundry and placing the bios resource list just below
the MSEG where the STM setup functions can find it.
Fixes: commit 5747f6c (cpu/x86/smm_module_loader.c Rewrite setup)
Signed-off-by: Eugene Myers <edmyers@tycho.nsa.gov>
Change-Id: I7359939063bb1a172fcb701551c099edebfbedd5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67665
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes AP hanging issue caused by the handshaking between
MCUPM and CPUfreq driver.
CPUfreq hardware failed to read MCUPM registers due to DEVAPC
permission. Therefore, update the DEVAPC settings to fix this issue.
BUG=none
TEST=CPUfreq in kernel test pass.
Change-Id: I6b30b01fc0be052182599709cbcc9139e6d09742
Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67724
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set tcc_offset value to 1℃ in devicetree for Thermal Control Circuit
(TCC) activation feature. This value is suggested by Thermal team.
BUG=b:246913963
TEST=USE="project_crota project_brya" emerge-brya coreboot
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ie2f60bed34fbd6fa3624be60138511a22b199a8d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67708
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch provides a workaround which skips requesting IOM for D3 cold
entry sequence.
BUG=b:244082753
TEST=Verified MUX configuration after hot plugging Type-C devices on
Rex and MTL RVP boards.
Change-Id: I17bcde75360c4b2b40885d355702e3e5f45d770a
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This reverts commit 7ef5376123d4d0ebb811795fcee1de7066f65a0f.
Reason for revert: It was merged before its dependencies so now master is broken.
Change-Id: Ia270efaed4f5c9d0c7b9761ae22dec55f57f74cf
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67285
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 6317aff5b3028ad44b7885b6b63263c55b5aadb3.
Reason for revert: fix broken tot master
Change-Id: Ie8075cf6c80448bfc957a1e1183f0283d2011b1b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67287
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit d6695626631a86d9613ea7c34ff0e898fbfa443c.
Reason for revert: Was submitted out-of-order and with an unresolved
TODO in the commit message.
Change-Id: Id5a8770226afbfcdf63d451157e4586b6cdd5189
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67284
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previously, the Bluetooth interface worked when port 9 was enabled.
Now, it works with port 5 enabled, which matches the schematic.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If783e60c8120adcd6522676cb3343ed46bf39d78
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
This patch makes dedede EC wake up AP from s0ix when the state of
charge drops to low_battery_shutdown_percent.
Demonstrated as follows:
1. Boot OS.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 4.
4. System resumes.
BUG=b:244253629
TEST=Verified on dedede
Change-Id: I39234d2b9e739383b5f96be49077f8c9831fa0fa
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
FSP silicon 3347 changed the default value of the EnergyEfficientTurbo
Updateable Product Data (UPD), enabling the Energy Efficient Turbo
feature by default. This feature prevents the cores from entering
Turbo frequency under heavy load.
As a result of this FSP change, coreboot explicitly disables this
feature to stay consistent with commit `caa5f59279e Revert
"soc/intel/alderlake: Enable energy efficiency turbo mode"'.
BRANCH=firmware-brya-14505.B
BUG=b:246831841
TEST=verify that bit 19 of MSR 0x1fc is set. 'iotools rdmsr 0 0x1fc'
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Change-Id: I7498f87eb4be666b34cfccd0449a2b67a92eb9db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
On ADLRVP with LP5 memory, MRC team recommends enabling ECT(Early
Command Training) to avoid hang during boot process.
BRANCH=firmware-brya-14505.B
TEST=Booted to OS on ADLRVP with LP5 memory.
Signed-off-by: Zhixing Ma <zhixing.ma@intel.com>
Change-Id: I2472707825bbbdd8e5c12a714e0d40ea0b458838
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67651
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Skolas board is based on Raptor Lake SoC, not Alder Lake. The code
change sets CPU power limit values as performance configuration based
on various Raptor Lake SoC SKUs as per the document #686872.
BUG=b:242869605
BRANCH=None
TEST=Built and tested on skolas board
Change-Id: Ieb3ca4ff77039412ef56da49e1b438f5e0b9db02
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Coverity is throwing a bunch of "maybe uninitialized" errors for tu
struct. Initialize the tu struct with zero.
BUG=b:182963902,b:216687885
TEST=Validated on qualcomm sc7280 development board.
Monitor name: LQ140M1JW49
Change-Id: Ie249ad4f53abc91376445420712364a28618a15a
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Enable ddc on DDI_PORT_2 for support DP++.
BUG=b:240382609
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I475e3c0278cfa92ab40ad84f6da580b4cded9933
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch adds power state 1/2/3 threshold setting interfaces
and pass the settings to FSP.
BUG=b:229803757
BRANCH=None
TEST=Add psi1threshold and psi2threshold to overridetree.cb and
enable FSP log to ensure the settings are incorrect.
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: I0330ede4394ebc2d3d32e4b78297c3cb328660d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67463
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Add a variant specific S0ix hook to fill the SSDT table to disable and
enable camera during suspend and resume respectively.
BUG=b:206911455
TEST=Build Boten BIOS image. Ensure that camera is disabled during
suspend and enabled during resume.
Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
Add FM350GL 5G WWAN support using drivers/wwan/fm and additional PM
features from RTD3.
BUG=b:244077118
TEST=check cbmem -c
\_SB.PCI0.RP06: Enable RTD3 for PCI: 00:1c.5 (Intel PCIe Runtime D3)
\_SB.PCI0.RP06: Enable WWAN for PCI: 00:1c.5 (Fibocom FM-350-GL)
check PXSX Device is generated in ssdt.
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I6114c589769d2eca882cf1a5255cf4c5937121a6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add new ram_id:3 (0011) for memory part K3LKCKC0BM-MGCP.
DRAM Part Name ID to assign
K3LKCKC0BM-MGCP 3 (0011)
BUG=b:247039096
TEST=Use part_id_gen to generate related settings and
emerge-nissa coreboot
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I78d2e501b9d8d801a3d149002f638125bf4275f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The µcode updates for Broadwell come from coreboot's blobs submodule
and have not been updated in at least 7 years. Use the µcode updates
available in the intel-microcode submodule. This change forgoes some
µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2
and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs
with CPUID 0x40651 in favor of a newer intel-microcode revision that
was already being used: when the µcode updates are concatenated into
one file, the newer µcode update revision would be placed before the
older revision, so the latter would never be used.
Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Commit 27126f135dad3c0e2f91394e7088b2ff50220146 (cpu/intel/haswell: add
Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include
any µcode updates for them. It is unknown how this could have worked as
the initial µcode inside the CPU can be quite unstable. Intel CPUs with
support for FIT (Firmware Interface Table) can have their µcode updated
before the x86 reset vector is executed.
The µcode updates for Crystal Well CPUID 0x40661 can be found inside the
intel-microcode submodule. There are no publicly available µcode updates
for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which
is not meant to be used anymore. Hook up the available µcode updates for
Crystal Well CPUs.
Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
There are two types of Haswell/Broadwell platforms: Trad(itional) with
separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share
one package. Mainboards can specify which platform type they are using
the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences
between Trad and ULT/ULX that it's not worth doing runtime detection.
The CPUIDs are different for Trad and ULT/ULX platforms, and so are the
µcode updates. So, including Trad µcode updates in a coreboot image for
an ULT/ULX mainboard makes no sense, and vice versa.
Adapt the Makefile so that only relevant µcode updates are added. Also,
add a few comments to indicate which updates correspond to which CPUs.
TEST=Run binwalk on coreboot.rom to verify included µcode updates for:
- Asrock B85M Pro4 (Haswell Trad)
- HP Folio 9480M (Haswell ULT/ULX)
- Purism Librem BDW (Broadwell ULT/ULX)
Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Builds are failing on upstream master branch because there is no
board_info.txt for the Intel Meteor Lake RVP mainboard; this patch
adds a basic one so the tree will build.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I3356ad65132dc4aaebd5e7d959a2bdb9ab1316b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67711
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|