Age | Commit message (Expand) | Author |
2015-04-15 | veyron_rialto: Change recovery GPIO to PUSH_KEY. | Hung-Te Lin |
2015-04-15 | veyron_rialto: Fix boot failure in romstage. | Hung-Te Lin |
2015-04-15 | rk3288: set the rk808 BUCK default inductor current to max value | huang lin |
2015-04-15 | rk3288: Fix failing LPDDR3 reboot test | jinkun.hong |
2015-04-15 | rk3288: Fix failing DDR3 reboot test | jinkun.hong |
2015-04-15 | google/veyron_*: Remove unused sdram-ddr-hynix-2GB.inc | huang lin |
2015-04-15 | Jerry: add SAMSUNG K4B4G1646Q-HYK0 ddr3 sdram support | Paul Ma |
2015-04-15 | veyron: support H5TC4G63CFR sdram in jerry | huang lin |
2015-04-15 | veyron: Add veyron_rialto board | jinkun.hong |
2015-04-15 | ipq806x: load and start RPM | Vadim Bendebury |
2015-04-15 | storm: Add watchdog reset api. | Deepa Dinamani |
2015-04-15 | ipq806x: Load TZBSP blob from coreboot ramstage | Vikas Das |
2015-04-15 | storm: adjust rombase startup to vboot2 | Vadim Bendebury |
2015-04-15 | storm: use different CBFS caches before and after DRAM is available | Vadim Bendebury |
2015-04-15 | storm: configure/enable vboot2 support | Vadim Bendebury |
2015-04-15 | ipq8064: add DRAM initialization code | Vadim Bendebury |
2015-04-15 | ipq806x: add i2c driver | Vadim Bendebury |
2015-04-15 | google/storm: prepare enabling vboot2 | Vadim Bendebury |
2015-04-15 | ipq806x: modify imem layout | Deepa Dinamani |
2015-04-15 | soc/ipq806x: Disable LPAE mode. | Deepa Dinamani |
2015-04-15 | storm: add code for detecting rec/dev/write protect switches' status | Daisuke Nojiri |
2015-04-15 | ipq806x: set architecture to ARMV7 | Vadim Bendebury |
2015-04-15 | broadwell: Fixes for _SWS support | Duncan Laurie |
2015-04-15 | broadwell: Remove unused bootblock code | Duncan Laurie |
2015-04-15 | broadwell: Clean up ME device and add new ME10 flow | Duncan Laurie |
2015-04-15 | soc/baytrail: Use microcode from the blobs repository | Marc Jones |
2015-04-15 | soc/broadwell: Use microcode from the blobs repository | Marc Jones |
2015-04-15 | veyron: Add "backlight" GPIO to coreboot table | Julius Werner |
2015-04-15 | brain: remove sdmmc_power_off() in romstage | David Hendricks |
2015-04-15 | veyron_danger: Enable EDP display init | David Hendricks |
2015-04-15 | Danger: Apply differences between Brain and Danger | David Hendricks |
2015-04-15 | Danger: Initial mainboard import | David Hendricks |
2015-04-15 | rk3288: send correct EDID buffer size | huang lin |
2015-04-15 | rk808: Implement RTC driver | David Hendricks |
2015-04-15 | veyron_*: Move PMIC_BUS to a Kconfig variable | David Hendricks |
2015-04-15 | rk3288: Implement support for CRYPTO module and use it in vboot hashing | Julius Werner |
2015-04-15 | veyron: add H9CCNNN8GTMLAR sdram in speedy | Jiazi Yang |
2015-04-15 | veyron: Support Speedy v1 hardware | huang lin |
2015-04-15 | Brain: Apply differences between Jerry and Brain | David Hendricks |
2015-04-15 | Brain: Initial mainboard import | David Hendricks |
2015-04-15 | blaze: add new Micron 2GB BCT | Neil Chen |
2015-04-15 | veyron: Fix TPM I2C initialization and sync boards | Julius Werner |
2015-04-15 | veyron_*: Use common CBFS wrapper | David Hendricks |
2015-04-15 | veyron: Support Mighty v1 hardware | huang lin |
2015-04-15 | veyron: Support Jerry v3 hardware | huang lin |
2015-04-15 | veyron: Support Pinky v4 hardware | huang lin |
2015-04-15 | veyron: Move backlight gpio control to mainboard.c | huang lin |
2015-04-15 | veyron: Trigger hard reset (via GPIO) if last reboot was caused by watchdog | Julius Werner |
2015-04-15 | veyron_speedy: Support Samsung-4GB and Lynix-4GB LPDDR | huang lin |
2015-04-15 | veyron: Add veyron_speedy board | huang lin |
2015-04-15 | veyron: Turn off SD card power in romstage | Julius Werner |
2015-04-15 | rk3288: implement spi_crop_chunk() | Patrick Georgi |
2015-04-15 | Kconfig: Fix incorrect CONFIG_STACK_SIZE values for X86 and ARM64 | Julius Werner |
2015-04-14 | Add console wrapper for UART driver | Vadim Bendebury |
2015-04-14 | storm: do not enable the ethernet switch by default | Vadim Bendebury |
2015-04-14 | samus: Declare TPM in devicetree.cb and include ACPI device | Duncan Laurie |
2015-04-14 | broadwell: Remove TPM device from lpc.asl | Duncan Laurie |
2015-04-14 | wtm2/samus: fix coreboot compilation error with tpmp removed | Harry Pan |
2015-04-14 | urara: increase drive strength for SPIM1 MFIOs | Ionela Voinescu |
2015-04-14 | urara: setup I2C0 clock and MFIOs | Ionela Voinescu |
2015-04-14 | pistachio: implement clock setup for I2C0 | Ionela Voinescu |
2015-04-14 | urara: Reduce MIPS PLL jitter | Ionela Voinescu |
2015-04-14 | pistachio: Fix ROM clock base address | Ionela Voinescu |
2015-04-14 | urara: add clock setup for MIPS CPU, ROM and Ethernet | Ionela Voinescu |
2015-04-14 | urara: remove call to printk before UART is initialized | Ionela Voinescu |
2015-04-14 | pistachio: fix clocks setup code | Ionela Voinescu |
2015-04-14 | pistachio: Use 1.8433179 MHz for UART refclk | David Hendricks |
2015-04-14 | pistachio: increase size of bootblock to 18 KB | Ionela Voinescu |
2015-04-14 | pistachio: change memory layout as to allow bigger CBFS cache | Ionela Voinescu |
2015-04-14 | pistachio: spi: use same clock edge for RX and TX | Ionela Voinescu |
2015-04-14 | urara: Configure clocks and MFIOs | Ionela Voinescu |
2015-04-14 | tegra132: lock down VPR | Aaron Durbin |
2015-04-14 | rush: Enable dp display | Jimmy Zhang |
2015-04-14 | ryu: display: Add function to pass mode info to payload | Jimmy Zhang |
2015-04-14 | ryu: display: Set display shift clock divider | Jimmy Zhang |
2015-04-14 | rush: Configure display related clock, pad, and power | Jimmy Zhang |
2015-04-14 | rush: devicetree: Define default dp panel parameters | Jimmy Zhang |
2015-04-14 | rush: Add dp related parameters | Jimmy Zhang |
2015-04-14 | arm: Fix checkstack() to use correct stack size | Julius Werner |
2015-04-14 | rk3288: Fix memlayout to allow a little more bootblock space | Julius Werner |
2015-04-14 | timestamps: You can never have enough of them! | Julius Werner |
2015-04-14 | rk3288: Add CBMEM console support and fix RETURN_FROM_VERSTAGE | Julius Werner |
2015-04-14 | timer: Reestablish init_timer(), consolidate timer initialization calls | Julius Werner |
2015-04-14 | CBFS: Automate ROM image layout and remove hardcoded offsets | Julius Werner |
2015-04-14 | CBFS: Correct ROM_SIZE for ARM boards, use CBFS_SIZE for cbfstool | Julius Werner |
2015-04-14 | chromeec: Fix printf formatting warning | Anatol Pomozov |
2015-04-14 | storm: add ipq8064 blobs to the CBFS | Vadim Bendebury |
2015-04-14 | ipq8064: use the new utility to build bootblock | Vadim Bendebury |
2015-04-13 | ti/am335x: switch to generic udelay | Patrick Georgi |
2015-04-13 | arch/mips: provide proper cache primitives | Ionela Voinescu |
2015-04-13 | broadwell: Work around VBIOS framebuffer issue | Duncan Laurie |
2015-04-13 | rk3288/exynos5250/exynos5420: Consolidate timer files | Julius Werner |
2015-04-13 | rk3288: Increase PD_BUS_ACLK (SRAM clock) to improve boot speed | Julius Werner |
2015-04-13 | storm: Fix timer init order problem | Julius Werner |
2015-04-13 | ipq806x: copy i2c, qup, and gsbi drivers from depthcharge | Daisuke Nojiri |
2015-04-13 | storm: add hard_reset template | Daisuke Nojiri |
2015-04-13 | mips: disable caches in bootblock startup code | Vadim Bendebury |
2015-04-13 | tpm: Only expose base address Kconfig option when enabled | Patrick Georgi |
2015-04-13 | rk3288: Move UART initialization to bootblock_mainboard_early_init() | Julius Werner |
2015-04-13 | arm: Add bootblock_mainboard_early_init() for pre-console initialization | Julius Werner |