summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2022-11-07soc/intel/cannonlake: Fix GPIO reset mappingAngel Pons
According to document 337348-001 (Intel® 300 Series and Intel® C240 Series Chipset Family Platform Controller Hub Datasheet - Volume 2 of 2), the only GPIOs that support PWROK reset are those in the GPD group. The mappings themselves are correct, but they're assigned to the wrong communities. Change-Id: Ib586c987f768ddff31b053f4c108a8526326a7dc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69214 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-07mb/google/brya/variants/volmar: Add firmware config field for FPMCURen Kuo
The fingerprint(FP) feature is only for volmar,and it's not for zavala. Add FPMCU_MASK field in fw_config to disable the FP function for zavala, and reserve FP function for shipped volmar. Define the value as following: field FPMCU_MASK 10 option FPMCU_ENABLED 0 option FPMCU_DISABLED 1 end BUG=b:250807253 TEST=build firmware and verify the fp function in volmar DUT. write `disable=1` and 'enable=0' in FPCMU_MASK field. check the fp function and run `ectool --name cros_fp version` It works as expected. Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I867771904811459697056662d5e29c545a1a9474 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68917 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-05cpu/x86/mp_init.c: Use existing code to create cpu struct deviceArthur Heymans
Change-Id: I80baadd405b31d6be2fdbb894b0f4b7c775da6f8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/64341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-05mb/google/guybrush: Rename pcie_gpio_table to romstage_gpio_tableMatt DeVillier
Rename so table more indicative of when GPIOs are set, and so it can be used for more than just setting PCIe GPIOs. Will be used to set touchscreen GPIOs as part of power sequencing in a subsequent commit. Rename all variant tables and getter functions to match. This mirrors the changes made for skyrim in CB:67810 Change-Id: I72e7febfb532262be7e4c14bf136e0d69c91301e Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-11-05mb/google/guybrush: rename baseboard GPIO table getter for clarityMatt DeVillier
Rename variant_pcie_gpio_table() to baseboard_pcie_gpio_table(), since the GPIO table comes from the baseboard and is overridden by a separate table from the variant. Drop the __weak qualifier as this function is not overridden. This is similar to the change made for skyrim in CB:67809 Change-Id: I14c79fad04f18d874ce6ff7e572bb237445db8b1 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-11-05mb/google/brask: Disable PCH USB2 phy power gating for moliCasper Chang
The patch disables PCH USB2 Phy power gating to prevent possible display flicker issue for moli board. Please refer Intel doc#723158 for more information. BUG=b:257373742 TEST=Verify the build for moli board Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I457d410501be996f0f29ec622e1829f1581c4970 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69193 Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
2022-11-05soc/intel/block/power_limit: Avoid MSR read if it is not neededWerner Zeh
In function 'set_power_limits' there is a path to bail out early if the Kconfig switch SOC_INTEL_DISABLE_POWER_LIMITS is selected. In this case reading the MSR PLATFORM_INFO is useless and can be avoided. So read it right before the value is needed. This was found by the scanbuild. In addition, fix an unnecessary line break to increase code readability. Change-Id: Ibdededdfd56287fb9b9223e78033a3cd6425e1a2 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-05drivers/i2c/generic: Print error when using _CRS and PowerResourceRaul E Rangel
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. I'm making this an error because we should really clean these up. BUG=b:210694108 TEST=Boot guybrush and see error: > I2C: 02:5d: ERROR: Exposing GPIOs in Power Resource and _CRS > \_SB.I2C1.H05D: Goodix Touchscreen at I2C: 02:5d Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ifcc42ed81fff295fb168a0b343e96b3a650b1c84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2022-11-04src/soc/amd/mendocino: Enable override of MAINBOARD_BLOBS_DIRNikolai Vyssotski
When using site-local we need to have ability to override MAINBOARD_BLOBS_DIR with a different location (presumably somewhere in site-local). site-local Makefiles.inc should be pulled in first (different CL) allowing MAINBOARD_BLOBS_DIR to be overwritten. Change-Id: I028042b947887d1182642ad4482dd1bba7ad8e23 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68801 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-11-04soc/amd/*/data_fabric: Use common device opsFred Reitberger
Use the common device ops instead of an soc-specific device ops. TEST=builds for each soc Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I1804200c3c3f5ab492d237f4b03484c383862caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/69174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04soc/amd/common/data_fabric: Make common device opsFred Reitberger
Add the generic data_fabric_acpi_name function and device ops to common code. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I12053389a12081ddd81912a647bb532b31062093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04soc/amd/mendocino/data_fabric.c: Make function more genericFred Reitberger
Make the data_fabric_acpi_name function more generic, in preparation to move it to common. TEST=build chausie, dump ACPI tables, and inspect DFD0 to DFD7 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I77140d8d0d6bf3e048b737de03d18142a6e23c1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/69172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04mb/google/reef: Fix guarding of reading SKU from VPDMatt DeVillier
VPD read depends on CONFIG(VPD), not CONFIG(CHROMEOS). TEST=build/boot snappy, verify SKU set properly in SMBIOS Change-Id: I8aa57f793bd04dbe31f3b49bbff23e05c96592a6 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04soc/amd/*/data_fabric: Move register offsets to socFred Reitberger
Morgana/Glinda have a different register mapping for data fabric access, although the registers themselves are mostly compatible. The register layouts defined by each soc capture the differences and the common code can use those. Move the register offsets to soc headers and update the offsets for morgana/glinda per morgana ppr #57396, rev 1.52 and glinda ppr #57254, rev 1.51 Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I9e5e7c85f99a9afa873764ade9734831fb5cfe69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04soc/amd/common/block/data_fabric: Use register bitslice structsFred Reitberger
Now that the socs have defined the DF FICAA and MMIO Control registers, update the common code to use them. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ia5566f7af6cf5444fc8c627e004dd08185468c77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04mb/google/rex: Enable RFIM for CNVizhaojohn
This patch enables the radio frequency interference mitigation for Rex. BUG=b:248391777 TEST=Booted to OS on Rex board. Verified RFIM DSM is presented to kernel through ACPI SSDT. Change-Id: I22f9861452c2c222dd7a33bfeb02c63b026bf2f7 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-04soc/intel/meteorlake: Provide mitigation support for CNVi RFIzhaojohn
The DDR RFIM is a frequency shifting RFI mitigation feature required by the Intel integrated Wi-Fi firmware(CNVi) for Meteor Lake. Please refer to Intel technical white paper 640438_Intel_DDR_Mem_RFIM_Policy_Enable once it is externally available. This change has backport changes from commit hash 6f73a20 (soc/intel/alderlake: Move CnviDdrRfim property to drivers) and provides the CNVi RFIM support for Meteor Lake. BUG=b:248391777 TEST=Booted to OS on Rex. Looked the DDR_DVFS_RFI_CONFIG_PCU_REG register at the offset 0x5A40 of Mchbar and verified the BIT0 (RFI_DISABLE bit) is 0. Change-Id: I87110bc10b98a27a8f274680597b15a1df488824 Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67789 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04lib/coreboot_table: Rename lb_fill_pcieArthur Heymans
By convention 'fill_lb_xxx' is used. Change-Id: I046016b3898308bb56b4ad6a5834ab942fdd50f2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69183 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04lib/coreboot_table: Simplify API to set up lb_serialArthur Heymans
Instead of having callbacks into serial console code to set up the coreboot table have the coreboot table code call IP specific code to get serial information. This makes it easier to reuse the information as the return value can be used in a different context (e.g. when filling in a FDT). This also removes boilerplate code to set up lb_console entries by setting entry based on the type in struct lb_uart. Change-Id: I6c08a88fb5fc035eb28d0becf19471c709c8043d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2022-11-04mb/google/brask/var/kuldax: Update PsysPL2 and PsysPmaxDavid Wu
Update PsysPL2 and PsysPmax. BUG=b:253542746 TEST=Make sure PsysPL2 and PsysPamx values set properly (through debug output) Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I0ffad751e8a99b282a5d05563a60745ee09e892c Reviewed-on: https://review.coreboot.org/c/coreboot/+/69155 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-04include/device/pci_def.h: Add some PCIe DPC/AER definitionsTim Chu
* Add DPC related definitions which are defined in 7.9.14 of PCIe 6.0 spec. * Add AER related definitions which are defined in 7.8.4 of PCIe 6.0 spec. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Change-Id: Ifb6722c326ef69ef1bf3b1c2c1d5bc0cb29d7c12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69106 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-11-04Revert "soc/intel/xeon_sp/cpx: Add get_ewl_hob() utility function"Felix Held
This reverts commit 3bc9fbb496c7e1ae346c8d7e98d2bcabbbbe8673. The patch that added hob_enhancedwarningloglib.h was marked as private after the Jenkins run, so I didn't see and submit it before submitting the patch that gets reverted by this commit. Temporary revert this patch to fix the coreboot tree until the issue with the missing patch is sorted out. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If56609dd2d91a70fe7e99ce86e0341f2b3fee3d3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69229 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04Revert "drivers/ocp/ewl: Add EWL driver for EWL type 3 error handling"Felix Held
This reverts commit 059902882ce56502124375c9395ebe8b49640710. A dependency of the previous patch that added the get_ewl_hob function used by this patch was missing, so this patch needs to be temporary reverted to revert the patch that breaks the build due to the missing dependency. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idb2fa27e75eede1648ddbf82c8bfbeeb2e9220a6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69228 Reviewed-by: Tim Crawford <tcrawford@system76.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Tested-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2022-11-04mb/prodrive/atlas: Add IBECC Kconfig optionMaximilian Brune
Add an option on Atlas to enable IBECC (In Band Error Correction Code), which is currently needed for endurance testing. Test: start atlas mainboard with Linux. See in dmesg that IBECC (EDAC igen6) driver is loaded. Inject a fake error via debugfs and see in dmesg that Linux handles it. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I71ee2401136e2dc70b3164db6c99af03a3e1f346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2022-11-04soc/intel/alderlake: Add IBECCMaximilian Brune
Add In Band Error Correction Code to Alderlake SOC's. It's currently needed and tested for the Prodrive Atlas mainboard. After enabling it in the UPD, FSP-M takes care of enabling IBECC. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I9cc2ed6defa1223aa422b9b0d8145f8f8b3dd12e Reviewed-on: https://review.coreboot.org/c/coreboot/+/68756 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04soc/intel: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I7da9c672ee230dfaebd943247639b78d675957e4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69032 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-04drivers/ocp/ewl: Add EWL driver for EWL type 3 error handlingShelly Chang
Add EWL (Enhanced Warning Log) driver which handles Intel EWL HOB and prints EWL type 3 primarily associated with MRC training failures. Change-Id: Ibd5b521bafd457505db4147c5d3fe41364a09045 Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com> Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69145 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04soc/intel/xeon_sp/cpx: Add get_ewl_hob() utility functionJohnny Lin
Change-Id: I8f949e9c881099c3723fca056e2c4732ca8b64cf Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69144 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2022-11-04soc/xeon_sp: Add weak mainboard_ewl_check for EWL check after FSP-MJohnny Lin
EWL (Enhanced Warning Log) is a FSP HOB generated by FSP-M that may contain several warnings/errors related to core, uncore and memory, etc. mainboard can override it in its romstage.c for its own Enhanced Warning Log check. Change-Id: I6f542e71d20307397c398fd757d9408438f681ed Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69143 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-04soc/mediatek/mt8188: Disable input-gating for big-core SRAMLiju-Clr Chen
The input-gating is an experimental feature (but unfortunately default enabled) and would lead to crash on MT8188, so we have to disable it in the firmware stage. BUG=b:233720142 TEST=CPUfreq in kernel test pass. Change-Id: Ifd68fe9362587955cdb8598c4cc5c2d0eefe53ca Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69089 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04soc/mediatek/mt8188: Fix AP hang when enabling cpufreq-hw driverLiju-Clr Chen
When enabling cpufreq-hw driver, it is required for MCUPM to access secure registers. Therefore, we enable side-band to allow MCUPM to access the secure registers. BUG=b:236331463 TEST=It works well after boot to login shell. Change-Id: I67b08c38a31a7eae1bc59543a5148a78b61456d6 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69088 Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
2022-11-04mb/google/rex: Fix fw_config probe for UFC and WFCKapil Porwal
Fix fw_config probe for UFC and WFC. BUG=b:255971791 TEST=Build Google Rex. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I5103e7da04004414d96f42057c105cf9fbf51b25 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-04soc/intel/**/fast_spi.c: Drop spurious whitespaceAngel Pons
Drop 1 (one) newline and 1 (one) space. Change-Id: I1972d173f99507dd167bd86c73d99434b04701ab Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69167 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-04commonlib: Fix AMD MP2 BUFFER idMartin Roth
Cut and paste error. Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Change-Id: Iae6213ac99bc5c64fd5dcd681c7922eafa011fc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69165 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04mb/google/brya/var/lisbon: update USB topology in devicetreeKevin Chiu
update USB topology per the schematic design BUG=b:246657849 TEST=FW_NAME=lisbon emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I2976028d3efa20e25deedb34ffb8b3bab43b5f5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/68918 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-04mb/system76/adl-p: Add Darter Pro 8Tim Crawford
The Darter Pro 8 (darp8) is an Alder Lake-P board. Tested with a custom TianoCore UefiPayloadPkg. Working: - PS/2 keyboard, touchpad - Both DIMM slots (with NMSO480E82-3200EA00) - M.2 NVMe SSD (with MZVL2500HCJQ) - M.2 SATA SSD (with WDS100T2B0B) - All USB ports - SD card reader - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Backlight controls on Windows 10 and Linux 6.1 - HDMI output - DisplayPort output over USB-C - Internal microphone - Internal speakers - Combined header + mic 3.5mm audio - S0ix suspend/resume - Booting Pop!_OS Linux 22.04 with kernel 5.18.5 - Internal flashing with flashrom v1.2-703-g76118a7c10ed Not working: - Detection of devices in TBT slot on boot Change-Id: Icc84d6cc3aec7149d9b538305288bbe2b56d53e4 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04mainboard: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: Iccb7f28a2c913ae0983bf224a03610d7fdd13c68 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69030 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04soc/intel/skylake: Clean up includesElyes Haouas
Change-Id: I505ef39487b2677993423e5952b54e008e24fcc5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04Revert "soc/mediatek/mt8188: Allow CPUfreq hardware to access MCUPM registers"Liju-Clr Chen
This reverts commit a8172c329fe309f3b5b409c1a59a227186400dd4. In the aforementioned patch, we allowed MCUPM to access secure registers and set the domain to DOMAIN_2. Additional attribute settings are also required when a hardware is set to a specific domain. Otherwise, there would be violation between hardware. Since MT8188 is in bring-up stage, we simply enable access register permission for the DOMAIN_0 by default. So remove the wrong setting for MCUPM, SCP and SSPM. We will complete DEVAPC setting when the settings are confirmed. Change-Id: I5d9809f6e84b8d10bc2e6f2ea5a442e676ad3bf9 Signed-off-by: Liju-Clr Chen <liju-clr.chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69139 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-11-04soc/amd: Specify memory types supported by each chipMartin Roth
This change disables support for memory types not used by each of the chips. This will in turn remove the files for those memory types from the platform builds. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8c7f47b43d8d4a89630fbd645a725e61d74bc2a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68994 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04soc/amd/common: Only call into enabled memory typesMartin Roth
Don't call into disabled memory type code, it won't work. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ie239039b3dd2b5d0a6f8e9230fd3466bb8309761 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-04nb/intel/pineview: Specify supported memory typesElyes Haouas
Change-Id: If40010abdf180e40c2aab7a991c7382dc5b2d7d5 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69020 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04nb/intel/x4x: Specify supported memory typesElyes Haouas
Change-Id: I07c24ece29616fa008da0935c3fe71e35f16ed2d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04nb/intel/sandybridge: Specify supported memory typesElyes Haouas
Change-Id: Ie43e818d03f411733e1bba5b7a4721c9a54ff4a4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04nb/intel/gm45: Specify supported memory typesElyes Haouas
Change-Id: I3a3a45a1a36ea6ad0b8fb2d3ee78add0b38460ac Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04nb/intel/i945: Specify supported memory typeElyes Haouas
Change-Id: I3cc2a9786dfb1f8fb1ec8e78bde7c46c07f8da48 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-04device/dram: Add kconfig options for memory typesMartin Roth
Currently, we're building support for all memory types into every board, and letting the linker remove anything that isn't needed. This is okay, but it'd be nice to be able to build in just what's actually needed. This change adds options to specify both what is used and what is not. By doing it that way, the default values don't change, but platforms can start removing support for memory types that are not needed. When all platforms (SoCs, CPUs and/or Northbridge chips) specify what memory types they support, the defaults on the options to use a particular memory type can be set to no, and the options not to use a memory type can be removed. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I07c98a702e0d67c5ad7bd9b8a4ff24c9288ab569 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68992 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-03Revert "cpu/x86/mp_init.c: Set a bogus initial lapic_id"Felix Held
This reverts commit 1bb9786da30e ("cpu/x86/mp_init.c: Set a bogus initial lapic_id"), since it breaks MP init on amd/mandolin: [INFO ] CPU #0 initialized [INFO ] Initializing CPU #3 [INFO ] Initializing CPU #1 [INFO ] Initializing CPU #2 [EMERG] CPU: missing CPU device structureCPU: vendor AMD device 810f81 [DEBUG] CPU: family 17, model 18, stepping 01 [DEBUG] microcode: patch id to apply = 0x08108109 [INFO ] microcode: being updated to patch id = 0x08108109 succeeded [INFO ] CPU #1 initialized [ERROR] MP record 3 timeout. [INFO ] bsp_do_flight_plan done after 1206 msecs. [ERROR] MP initialization failure. [EMERG] mp_init_with_smm failed. Halting. TEST=The board boots again with the revert applied Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic1cae88f7345f9ff79e8f6e574521095b57c8cb7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69186 Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-03cpu/x86/mp_init.c: Handle failed init_bsp()Arthur Heymans
Bail out of mp_init if this function fails. Change-Id: I7be5d6c32458ba98f4f8c5c9340790ff989c91e7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69109 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03cpu/x86/mp_init.c: Set a bogus initial lapic_idArthur Heymans
This makes it easier to catch errors later if the ap_init code fails to properly set things up. Change-Id: I938faf042bfa4fe1fc39e78ab740c9b210bc105c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69108 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-11-03soc/amd/glinda/data_fabric: Add register bitslice structFred Reitberger
Add structs to define the data_fabric register bitfields, updated per glinda ppr #57254, rev 1.51 Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I509eaf5910d8d65ce0956200d7c00451ff9ce864 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd/morgana/data_fabric: Add register bitslice structFred Reitberger
Add structs to define the data_fabric register bitfields, updated per morgana ppr #57396, rev 1.52 Update IOMS0_FABRIC_ID and DF_MMIO_NP per referenced ppr. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: If64c875026b643c584975f7abffad9b35f1a7b44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd/mendocino/data_fabric: Add register bitslice structFred Reitberger
Add structs to define the data_fabric register bitfields. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I01dcea783542ecc0a761191907c1273016f854c2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69070 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd/picasso/data_fabric: Add register bitslice structFred Reitberger
Add structs to define the data_fabric register bitfields. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: If7cc94681cd5e282e09455c0ac7d3675884c3cf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69069 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd/cezanne/data_fabric: Add register bitslice structFred Reitberger
Add structs to define the data_fabric register bitfields. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: Ib5045812fb05eb8c3fb818d807e34decf69c6fff Reviewed-on: https://review.coreboot.org/c/coreboot/+/69068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd/*/data_fabric: move data_fabric_set_mmio_np to commonFred Reitberger
The data_fabric_set_mmio_np function is effectively identical, so move it to common code. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I58e524a34a20e1c6f088feaf39d592b8d5efab58 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03{device,drivers}: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I1727bf56b4090d040aab413006dec7aca0587d44 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03soc/amd: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: Iea29938623fe1b2bcdd7f869b0accbc1f8758e7a Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-03treewide: Add 'IWYU pragma: export' commentElyes Haouas
This pragma says to IWYU (Include What You Use) that the current file is supposed to provide commented headers. Change-Id: I482c645f6b5f955e532ad94def1b2f74f15ca908 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-11-03include/acpi/acpi_crat.h: Add missing <stdint.h>Elyes Haouas
Change-Id: Ic157cd820be204035706f8074dd6dbcb95c0f04f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-11-03ec/google/wilco: Include <cpu/cpu.h> instead of <arch/cpu.h>Elyes Haouas
Also sort includes. Change-Id: I93f02674fde0415e4d831ec13541a806bbc3bd91 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2022-11-03mb/google/brya/gaelin: Configure GPIO settingsRaymond Chung
Override GPIO pad configuration based on the latest gaelin schematic. BUG=b:249000573 BRANCH=firmware-brya-14505.B TEST=FW_NAME=emerge-brask coreboot Change-Id: I649ac5131393008787cbb403fc64b914de23312b Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-11-03soc/intel/alderlake: Hook up GMA ACPI brightness controlsTim Crawford
Add function needed to generate ACPI backlight control SSDT, along with Kconfig values for accessing the registers. Tested by adding gfx register on system76/lemp11. Backlight controls work on Windows 10 and Linux 6.1. Change-Id: I1cc33bf0121ff44aea68a7e3615c5e58e2ab6ce2 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-03mb/ocp/deltalake: Revert OVERRIDE_UART_FOR_CONSOLEJohnny Lin
This reverts commit f6efeae66c (mb/ocp/deltalake: Override uart base address via VPD variable). Both SOL and UART would use 0x2f8, disabling it can also avoid searching flash VPD during each UART tx. Change-Id: I453fdddbb883eb956bac708913c17bb581f75b9d Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-03mb/google/skyrim: Disable SD ASPMEricKY Cheng
Disable ASPM on SD until b/245550573 is root-caused/fixed. Logical_lane 1 on winterhold is EMMC device. Disable ASPM for suspend issue. BUG=b:249914847, b:245550573 TEST=emerge-skyrim coreboot chromeos-bootimage and test on whiterun proto emmc sku with suspend_stress_test -c 10 Change-Id: If080cdb517a3f22aa89c8053fb6bba9e931c6f76 Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68940 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-03drivers/i2c/generic: Tweak error text for missing HIDMatt DeVillier
- drop ERROR prefix since already provided by cbmem log - make error text more clear about cause of error BUG=none Change-Id: I1795aee240a5383b21108c697e930a2e4972a0b4 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69062 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-03nb/intel/gm45: Make polling loops more explicitAngel Pons
Replace `while (...);` with `do {} while (...);` so that it's easier to distinguish polling loops from something else, like function calls. The `{}` can be understood as "nothing", so that the construct is naturally read as "do nothing while (...)". Another reason to prefer this method is that Jenkins does not complain. Change-Id: Ifbf3cf072f8b817b2fdeece4ef89bae0822bb6e6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-11-02mb/google/skyrim: Use detect vs probed flag for touchscreensMatt DeVillier
Now that coreboot performs the necessary power sequencing, switch from using the 'probed' flag to 'detect' for all I2C touchscreens. This alleviates ChromeOS from having to probe to see which touchscreen model is actually present, prevents breaking ACPI spec by generating device entries with status 'enabled and present' which aren't actually present, and improves compatibility with upstream Linux and Windows. BUG=b:121309055 TEST=build/boot ChromeOS and Linux on skyrim, ensure touchscreen is functional, and ACPI device entry generated for correct touchscreen model. Change-Id: Id9e3089decf0f94a1358929684ce248e52cbe41f Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2022-11-02mb/google/hatch/var/kohaku: ensure FPMCU is power cycled on resetTarun Tuli
Leakage from the SPI CS line onto the FPMCU VDD rail was preventing the FPMCU from fully shutting down on AP reset. Instead of simply turning off the power rail, now ensure the CS line is not driven high until late in coreboot. This ensures it is completely off for the requisite minimum of 200ms (now measured at approx 1100ms). BUG=b:245953688 TEST=Confirmed FPMCU is still functional on Kohaku. Confirmed FpRebootPowerCycle unit test now passes BRANCH=Hatch Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I1e7e32f61c3ac1b3154d42821cc1dd4c5d3de303 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68819 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/google/hatch: Add variant finalize support for hatch devicesTarun Tuli
Provide a variant_finalize() method and call to be invoked from mainboard_ops.final BUG=b:245953688 TEST=Hatch and variants build BRANCH=Hatch Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I9253ed4be1b08d0c7f65526c9b26dbcd00ffccc7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68821 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/google/brya/var/lisbon: Enable SaGvKevin Chiu
Enable SaGv support for lisbon BUG=b:246657849 TEST=FW_NAME=lisbon emerge-brask coreboot pass RMT verification Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: Ic7d3203bfe06973b023a38d1aa3d69cce5c3a60c Reviewed-on: https://review.coreboot.org/c/coreboot/+/69013 Reviewed-by: Ricky Chang <rickytlchang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-02mb/google/brya/var/lisbon: Include driver for GL9763E for eMMC boot diskKevin Chiu
Support GL9763E as a eMMC boot disk BUG=b:246657849 TEST=FW_NAME=lisbon emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: Ibe579a913225b5241412bbb1b8ea995a5102a3bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/68888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-02mb/google/brya: enable PCIe RP12 for lisbon eMMC supportKevin Chiu
BUG=b:246657849 TEST=FW_NAME=lisbon emerge-brask coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: Ief8ca9cf845156ac761556d0eb49edb65894c001 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68167 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-02mb/google/corsola: Add new board 'voltorb'Mars Chen
Add a new kingler follower 'voltorb'. BUG=b:256737049 TEST=emerge-corsola coreboot Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com> Change-Id: Ic7175c38fcde76ab0360f62da161994ba2ee6a69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-11-02mb/clevo/l140mu: work around PECI staying high when idle, blocking s0ixMichael Niewöhner
According to Intel doc# 575683 the PECI bus should be low when idle and is pulled up by clients with strong drive. However, for unknown reasons the bus stays high on this board, blocking s0ix entry. The PECI reference schematic in the ASPEED AST2400 BMC datasheet (actually not related to this board) says that a pull-down is *required* for the idle state. This might be just a requirement of this BMC, since this is nowhere documented in Intel datasheets, schematics or elsewhere. However, configuring a weak pull-down (20 k) on the PECI pad indeed solves this problem for now. Change-Id: I85193000af67cd2c0465bdbb58cdd51b68fd5b4f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68794 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/clevo/l140cu: work around PECI staying high when idle, blocking s0ixMichael Niewöhner
According to Intel doc# 575683 the PECI bus should be low when idle and is pulled up by clients with strong drive. However, for unknown reasons the bus stays high on this board, blocking s0ix entry. The PECI reference schematic in the ASPEED AST2400 BMC datasheet (actually not related to this board) says that a pull-down is *required* for the idle state. This might be just a requirement of this BMC, since this is nowhere documented in Intel datasheets, schematics or elsewhere. However, configuring a weak pull-down (20 k) on the PECI pad indeed solves this problem for now. Change-Id: Ib5a6b0ad3553c2cf795037d6a1982102bcb04644 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68793 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/clevo/l140cu: enable S0ixMichael Niewöhner
Enable S0ix for the board, as done in vendor fw. Change-Id: Ifdf93e1e599e7cc03fc02297eafb49d34b1f6172 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68792 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02soc/intel/common: provide display hook in PEP for ECsMichael Niewöhner
Provide PEP display notification hook for ECs. Change-Id: Icbfd294cdd238e63eb947c227a9cf73daca702ef Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-02acpigen: export acpigen_write_field_nameMichael Niewöhner
It will be used in a follow-up change. Change-Id: If89f9569c33949995d3b45a5f871ff2cb84a6610 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-11-02device/mmio: add clr/setbitsXp macrosMichael Niewöhner
Add clr/setbits*p macros as pendant to read/write*p. Change-Id: I5b10ccab97c3a372051050b28ada854baec91d18 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68790 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02soc/intel/common/acpi: provide PTS/WAK hooks for ECsMichael Niewöhner
Provide PTS/WAK hooks for ECs like we do for mainboards. Change-Id: I687254362a896baa590959bd01ae49579ec12c94 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68788 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-02mb/google/brya/var/gladios: use RPL FSP headersKevin Chiu
To support an RPL SKU on gladios, gladios must use the FSP for RPL. Select SOC_INTEL_RAPTORLAKE for gladios so that it will use the RPL FSP headers for gladios. BUG=b:239513596 BRANCH=None TEST=FW_NAME=gladios emerge-brask intel-rplfsp coreboot-private-files-baseboard-brya coreboot chromeos-bootimage Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: Ic30f7fe30eb0a3151cdf46fff609819056b2fbfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/68570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-11-02mb/google/skyrim: Select GOOGLE_SMBIOS_MAINBOARD_VERSIONAmanda Huang
Select GOOGLE_SMBIOS_MAINBOARD_VERSION allows querying board revision from the EC. BUG=b:256723358 TEST=1. emerge-skyrim coreboot chromeos-bootimage 2. flash the image to the device and check board rev by using command `dmidecode -t 1 | grep Version` Change-Id: I97295083dbca1c285ef7359d86abac7315c654c9 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69087 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-11-02mb/google/rex: Disable TBT PCIe rp1 and rp3 root portszhaojohn
Rex board only uses TBT PCIe root ports 0 and 2. This change disables rp1 and rp3 root ports. BUG=b:254207628 TEST=Booted to OS and verified rp1 and rp3 root ports were disabled. Change-Id: Ia5c1d657c0ad0482619d739f8949bc9168eac25b Signed-off-by: zhaojohn <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68854 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2022-11-01mb/{lenovo,packardbell}: Enable MEI deviceEvgeny Zinoviev
Enable the MEI in device trees of some Ibex Peak, Cougar Point and Panther Point boards where they have been disabled. Change-Id: I4327d19d3ed1a93a6466057f6eceed49ab9441c5 Signed-off-by: Evgeny Zinoviev <me@ch1p.io> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42412 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2022-11-01mb/google/brask/variants/moli: remove fan settingRaihow Shi
Disable Active Policy and remove fan setting to let ec control fan indenpendently. BUG=b:236294162 TEST=emerge-brask coreboot Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com> Change-Id: Ie8851800d30ebf4d948d6eaadda2387c8afe52d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-10-31drivers/ipmi/ipmi_kcs_ops.c: accommodate BMC revision being 0Jonathan Zhang
BMC major/minor revision may be 0. Get the value directly from BMC without checking to accommodate such situation. Signed-off-by: Tim Chu <Tim.Chu@quantatw.com> Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Change-Id: I0e08c6d02de8f6efceb69b6d6cebad9d61cfd20e Reviewed-on: https://review.coreboot.org/c/coreboot/+/68685 Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-10-31drivers/ipmi/ipmi_ops.h: add __packed to sel_rec structsJonathan Zhang
Align with BMC on the SEL record format. Change-Id: Icfcef684caa253663503eadffc819ad2ab65550f Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com> Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68757 Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com> Reviewed-by: TangYiwei Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-10-31soc: Add SPDX license headers to MakefilesMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ic875708697f07b6dae09d27dbd67eb8b960749f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2022-10-30mb/google/skyrim: Implement touchscreen power sequencingMatt DeVillier
Assuming variants have a touchscreen by default, set the enable GPIO high and hold in reset during romstage, then release reset in ramstage. This will allow the touchscreen to make use of the runtime I2C detect feature (enabled in a subsequent commit) so that an ACPI device entry is created only for the touchscreen actually present. Variants/SKUs which do not have a touchscreen (if any) can use the romstage/ramstage GPIO override tables to set the associated enable/ reset GPIOs to NC. BUG=b:121309055 TEST=build/boot skyrim with rest of patch series Change-Id: Ic4d7ac8f951bb94da2216a24dc85a96275c9d449 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-10-29mainboard/amd/chausie: Don't use APCB_FT6_UpdatableNikolai Vyssotski
This APCB binary is not used for coreboot builds. Coreboot does not support RW APCB. Change-Id: I4d317ae31cf226b5481619f1539abb6237033f7c Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68802 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-10-29soc/amd/common: Initialize STB Spill-to-DRAMMartin Roth
Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I547671d2bcfe011566466665b14e151b8ec05430 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-10-29commonlib...cbmem_id.h: Add AMD STB buffer IDs for CBMEMMartin Roth
- CBMEM_ID_AMD_STB Main Spill-to-DRAM buffer. 2 to 16MiB. - CBMEM_ID_AMD_MP2 Debug buffer. 128KiB Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I27157ad65df992bcdd0e0d15a6d01b96e24067c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-10-29soc/amd/*/acpi/mmio.asl,sb_fch.asl: hide AAHB deviceFelix Held
Don't set bit 2 in _STA in order for Windows not to show a warning about an unknown device in the device manager for this device. Since the _STA object just returns a constant, a name definition can be used instead of a method definition. TEST=The unknown device with device instance path ACPI\AAHB0000\0 disappeared from the device manager in Windows 10 build 19045 on a Mandolin board with a Picasso APU. Just shutting down and then booting it again won't clear some internal state in Windows, so a reboot is needed instead for the change to become visible. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8cb1712756c3623cc3ea16210af69cde0fa18f62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-10-29mb/starlabs/*: Change the local version to KconfigSean Rhodes
Replace the string with a Kconfig option Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ib11ddd04c44f47b94f4fc9eaed278d554d581b0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/68937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-29mb/siemens/mc_ehl: Remove spd.bin from CBFSWerner Zeh
The SPD data for DRAM init has moved into the hwinfo data structure and is therefore not used from spd.bin anymore. spd.bin will not receive any updates, changes will only be done in hwinfo. There is no reason to keep spd.bin around so remove it for both variants. Change-Id: Ie6091b655ba7ff2e01b684266ce34b85593b8623 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-10-29soc/intel/meteorlake: Move P2SB PCI resource into P2SB deviceSubrata Banik
This patch ensures the P2SB PCI device resource is getting reserved so that the resource allocator is not assigning this resource to any other PCI device during the PCI enumeration. BUG=b:254207628 TEST=Able to ensure on the Google/Rex device, the PCI enumeration is not assigning the P2SB BAR (0xE000_0000) to TBT Root Port3. Instead the 0xE000_0000 address is being assigned to the P2SB PCI device. Without this patch: [SPEW ]     PCI: 00:07.3 resource base e0000000 size c200000 align 20 gran 20 limit ec1fffff flags 60080202 index 20 [DEBUG]      GENERIC: 1.0 [DEBUG]      NONE [SPEW ]      NONE resource base e0000000 size c200000 align 12 gran 12 limit ec1fffff flags 40000200 index 10 With this patch: [SPEW ]     PCI: 00:07.3 resource base e1000000 size c200000 align 20 gran 20 limit ed1fffff flags 60080202 index 20 [DEBUG]      GENERIC: 1.0 [DEBUG]      NONE [SPEW ]      NONE resource base e1000000 size c200000 align 12 gran 12 limit ed1fffff flags 40000200 index 10 ...... [DEBUG]     PCI: 00:1f.1 [SPEW ]     PCI: 00:1f.1 resource base e0000000 size 1000000 align 0 gran 0 limit 0 flags f0000200 index 10 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib0789b442af23f6be81c666e284633ef342dffe0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2022-10-29soc/intel/common: Fix potential NULL pointer dereferenceShaik Shahina
BUG=NONE TEST=Boot to OS on Nivviks Change-Id: I154011963e945b54dfca07f884e473d44dc4e813 Signed-off-by: Shaik Shahina <shahina.shaik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68903 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-10-29mb/google/brya/var/skolas: Adjust I2C3 CLK to meet 400 kHzAlanKY Lee
Fine tune I2C3 clock frequency under the 400 kHz. From 402.7 kHz to 382.9 kHz. BUG=b:255505160 BRANCH=firmware-brya-14505.B TEST=FW_NAME="skolas" emerge-brya coreboot chromeos-bootimage measure by scope with skolas Signed-off-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Change-Id: Ib6c3f895751387256378964ec76be45a4fcbba4e Reviewed-on: https://review.coreboot.org/c/coreboot/+/68906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2022-10-29acpigen: Always inline helper functionsJakub Czapiga
Acpigen inline helper functions are causing problems while compiling coreboot with function instrumentation. Sometimes functions are not inlined and are causing linking errors. Forcing inlining fixes problems like that, as these functions would normally be inlined anyway. Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Change-Id: Ibf747573940fe5e76199f327f4e5bc32b4f8c470 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 06:13:37 +0000