| Age | Commit message (Collapse) | Author |
|---|
|
In commit 7a95204 (intel/dcp847ske: Add Intel NUC DCP847SKE)
the default_irq_route.asl file was removed, but this mainboard
was missed. Follow suit with the original intent of the commit
and fix the build breakage.
Change-Id: I909dad7cfc0fab37e29187b2358f7f056216a403
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22975
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This speeds up the SPD read ('calling FspMemoryInit' phase) from
218ms to 134ms consistently.
Tested on both the Librem 13 v2 and Librem 15 v3.
Change-Id: I44fbe96c256972bd074537159771d61fe7adf082
Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm>
Reviewed-on: https://review.coreboot.org/22969
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Issue first reported at commit 1587dc8a2b, the call of functions
setup_bsp_ramtop() and setup_uma_memory() should be moved from enable_dev()
to soc_init(). The function setup_uma_memory() no longer exists, its
functionality transfered to agesawrapper_amdinitpost.
Move setup_bsp_ramtop() as required.
BUG=b:62240756
TEST=Build and boot kahlee.
Change-Id: I44e6cab17a8f7f364fc57657f41b211ec9d17641
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22948
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
If HECI gets times out when waiting for read slots, there's no need to
read back reply message to decide if the HECI recieve successed or not.
Otherwise, system will stuck after global reset required.
BUG=b:707290799
TEST=Boot up meowth board without battery, and confirm hard reset got
trigged after heci time out.
Change-Id: I7c1655284d7027294d8ff5d6a5dbbebe4cbd0c47
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/22910
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE
Created using autoport and manual edits.
mainboard_fill_pei_data copied and adjusted from samsung/lumpy.
Tested:
- RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V).
- RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V).
- SeaBIOS stable payload.
- Linux 4.13.14 payload.
- Booting into Linux 4.13.14 with Debian/unstable installed on the
internal mSATA slot.
- Non-native raminit (works).
- Native raminit
- KVR1333D3S9 doesn't work.
- KVR16LS11 only works at 1.5V.
- Native VGA init, HDMI port detection with libgfxinit.
- Basic ACPI functions (power button event; power-off; reboot).
- Suspend to RAM and resume works.
- PCIe WLAN in half-minicard slot.
- USB device in half-minicard slot.
- PCIe device in full-minicard slot.
- mSATA device in full-minicard slot.
- Fan spins up/down in response to CPU load.
Known issues:
- Native raminit fails timC calibration with the RAM I have.
- Technical Product Specification mentions overcurrent protection
for back panel and front panel USB connectors, but I haven't
been able to trigger it with either native fw or coreboot
(tried up to 2.5A load).
Untested:
- USB debug port.
Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch revises LED0 Green light behavior from patch 2ecf3f8c.
For 100Mb link speed, LED0 should be OFF.
BUG=b:65437780, b:68284778, b:69950854, b:65808944
BRANCH=None
TEST=Run DUT with 100Mb and 1000Mb ethernet connection and observe
LED0 is behaving as expected.
Change-Id: Ia805c955711b8ce77eba087a28427a005c456fa1
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/22964
Reviewed-by: David Wu <david_wu@quantatw.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The existing stoneyridge pre-cbmem console log contains about 250 bytes
of unused space. Increase this amount to accomodate any additional
debug messages.
BUG=b:64980233
TEST=Build and boot Kahlee, inspect console log with "cbmem -c"
Change-Id: Ia307795e91d81ff9b2be027916081f6824f90bad
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
New UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to configure
clock source number of PCIe root ports. This UPD array is set to clock
source number(0-6) for all the enabled PCIe root ports, invalid(0x1F)
is set for disabled PCIe root ports.
BUG=b:70252901
BRANCH=None
TEST= Perform the following
1. Build and boot soraka
2. Verify PCIe devices list using lspci command
3. Perform Basic Assurance Test(BAT) on soraka
Change-Id: I95ca0d893338100b7e4d7d0b76c076ed7e2b040e
Signed-off-by: Divya Chellap <divya.chellappa@intel.com>
Reviewed-on: https://review.coreboot.org/22947
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is a new UPD PcieRpClkSrcNumber introduced in FSP V2.9.2 to
configure clock source(s) of PCIe Root Ports. This UPD is used
to disable clock source(s) of disabled PCIe Root Port which
has active device connected.
CQ-DEPEND=CL:*520658,CL:*520659
BUG=b:
BRANCH=None
TEST= Build and boot soraka
Change-Id: Ia4e4d22be8b00a72de68ddde927a090d3441a76e
Signed-off-by: Balaji Manigandan B <balaji.manigandan@intel.com>
Reviewed-on: https://review.coreboot.org/22692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
BUG=b:70232394
BRANCH=none
TEST=emerge-reef coreboot
emerge-glados
Change-Id: Idb453a4d2411163e6b4a8422310bf272eac5d379
Signed-off-by: Chris Ching <chingcodes@chromium.org>
Reviewed-on: https://review.coreboot.org/22822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Stoneyridge has an RTC. Elog requires it for timestamps.
BUG=b:65485690
TEST=Build Kahlee with Elog. Check mosys eventlog list for
timestamps.
Change-Id: I4d820fbe11043e7e3153d67159f52274d5f14bae
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/22961
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch ensures skylake soc is using common SMM code
from intel common block.
TEST=Build and boot soraka/eve
Change-Id: I8163dc7e18bb417e8c18a12628988959c128b3df
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/22826
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add SoC API to detect any illegal access to write into the
BIOS located in the FWH.
Change-Id: If526cbae9afee47fa272bdf74e04416aff100e88
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Modify SMM common code in order to accommodate SKL, CNL, APL, GLK
SOC code.
Change-Id: Ie9f90df3336c1278b73284815b5197400512c1d2
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22869
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
firmware test team is requesting that default gbb flags set to 0x39
rather than 0x239 so that it's consistent with the default gbb flags
of other platforms.
BUG=b:70392534
BRANCH=None
TEST=emerge-fizz coreboot chromeos-bootimage
gbb_utility --get --flags image-fizz.bin and make sure
that it returns 0x39 instead of 0x239
Change-Id: Ib73e4619b13f6b7c2d01598c926fbbd7d7eb9bef
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/22962
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Enable S0ix for fizz.
BUG=b:67598361
BRANCH=None
TEST=None. Need to be tested with EC and kernel as well.
Change-Id: I981d2cc7e969a44567b0f21f63f68c78e73f5cb5
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/22955
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Don't rely on the cascading default values. Ensure Kahlee uses the fanless
versions of the SMU fimware by selecting it.
Change-Id: I0761266f2a4026ebc251b64074c10481118734a2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
apu4 is new version of PC Engines platform, which contains 4 Ethernet
ports and 4GB of RAM. In functional way it is very similar to apu3.
Platform tested with booting Linux voyage (kernel 3.16.7) using USB and
SeaBIOS as 1st stage and GRUB as 2nd stage bootloader. Also Debian
(kernel 4.8.5) using iPXE.
Change-Id: Ia7a9971d25d4ecc215c392be1e46dc1c10129ba7
Signed-off-by: Piotr Król <piotr.krol@3mdeb.com>
Reviewed-on: https://review.coreboot.org/22629
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
TEST=CNL_RVP is able to power on after reconnecting power supply.
Change-Id: I41e655fe79d958cce9e627ea2f2380185364ab19
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22840
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Original commit hash aeb2d64c85ca2c3a77f50d57e3a92f6fc0a5c2d3 (soc/intel/skylake:
Enable power button SMI when jumping to payload)
Change-Id: Ia4fe2694006baf24ed475c85aaffa6a0d2a6031d
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22868
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=KBL_RVP is able to power on after reconnecting power supply.
Change-Id: Ic707164a576ffb25418eb6553843cd8edc608800
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
PMC config register need to program to define which state system
should be after reapplied power from G3 state.
0 = System will return to S0 state
1 = System will return to S5 state
2 = System will return to previous state before failure
Refer to EDS for detailed programming sequence.
Change-Id: I0ce2cc77745d00a8cfe3eed7c6372af77e063d02
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22838
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In commit 7f5efd90e (intel/bd82x6x: Use generated ACPI PIRQ)
the default_irq_route.asl file was removed, but this mainboard
was missed. Follow suit with the original intent of the commit
and fix the build breakage.
Change-Id: Iac233b802239e4e5cfc66d9545bb637ec4f9f541
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22958
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch configures the EC_SCI_GPI when ESPI is enabled.Also adds
mainboard espi handler function.
TEST= Boot to OS and SMI/SCI is working when ESPI is enabled/disabled.
Change-Id: I2b3845d54ad7c1f14edc86f71b3f968424711999
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/22761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch adds the SMI bits for SMI_EN, SMI_STS and GPE
register in pm.h. The southbridge handler for espi smi is
also added. In gpe.h we add GPE0A_ESPI_SCI_STS which is
bit 20 in GPE register and enables the setting of the
ESPI_SCI STS bit to generate a wake event and/or an SCI/SMI.
TEST= Boot to OS.
Change-Id: I2b8372ffbe0949ddd4aa83bdd7c0a01ade3ed40e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/22758
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
coreboot console output during POST shows that the EC
replay fails to communicate with the EC. Since the replay
has no effect, it should be removed from the boot process.
coreboot log:
Replaying EC dump
.......Timeout while sending command 0x81 to EC!
.......Timeout while sending data 0x00 to EC!
(snip)
.......Timeout while sending command 0x81 to EC!
.......Timeout while sending data 0xff to EC!
.......Timeout while sending data 0xff to EC!
done
Change-Id: I05fb6358b40f442337f5768afa6253cd9bc32ee1
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Reviewed-on: https://review.coreboot.org/22736
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There is a potential IMVP8 issue for KBL that affects Intersil VRs
Fizz is using one of the affected parts. The fix is to use an updated
microcode and also send a mailbox box command from FSP.
BUG=b:65499724
BRANCH=None
TEST=Build and boot Fizz
Change-Id: Iebfda02df88ea0d2aaf79e8449b95c0eb2165c6b
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/22763
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The Intel version of ThinkPad X131e can ship with Sandy Bridge or
Ivy Bridge processors. The mainboard uses 8MiB+4MiB flash chips, with
the 8MiB chip containing the IFD and ME, and the 4MiB chip containing
the BIOS. The flash chips can be accessed with an external programmer.
This port was primarily created using autoport, with some parts adapted
from lenovo/x230 and google/stout.
Tested and working:
- Machine type 3367AH5 / Intel Celeron 887 (Sandy Bridge)
- Boots Debian GNU/Linux 9.2 (Linux 4.9.51) via SeaBIOS
- Boot from internal SATA and USB
- Native RAM init
- Native VGA init
- libgfxinit
- VGA and HDMI display output
- Keyboard, trackpoint, touchpad
- Audio (speaker, headphones)
- Ethernet (Realtek)
- Display backlight
- USB 3.0 ports
- "Always on" USB port (EHCI debug)
- SD card reader
- Webcam
- Fan and temperature sensors
- ACPI S3 (Sleep)
- CMOS
- TPM
Not tested:
- WLAN/Bluetooth (Broadcom)
- WWAN/mSATA (no card)
- Other operating systems
Not working or not implemented:
- Fn keys
- ACPI S4 (Hibernation) "Image mismatch: memory size"
Change-Id: If8de3a9308997e2d57aee869023ee9a43a2db872
Signed-off-by: James Ye <jye836@gmail.com>
Reviewed-on: https://review.coreboot.org/20694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I53f4a3e4030ea19e10c0fe11a99a3480644f5fae
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
While the older boards use a GPIO that has no state, the newer boards'
PMH7 does have a state, that even remains after reboot.
Don't assume default values in PMH7 and instead always program it.
Fixes dGPU doesn't show up when switching from integrated to discrete
GPU. The workaround of removing all power is no longer necessary.
Change-Id: I30ec19e13269cb254e51ad1fab3b10ad1a49e86e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In order to pass USB2 eye diagram, some USB2 port PHY registers
needs to be changed.
Port1 (Type-A): USB2_PORT_SHORT
Port2 (BT): USB2_PORT_SHORT
Port6 (H1): USB2_PORT_SHORT
Port7 (Camera): USB2_PORT_SHORT
BUG=none
BRANCH=master
TEST=emerge-nautilus coreboot and do eye-diagram test
Signed-off-by: sh.kim <sh_.kim@samsung.com>
Change-Id: I174e5bf96a53bb210481fb88298d5341f6c11dec
Reviewed-on: https://review.coreboot.org/22686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The current fan level should be zero at boot and only be modified by
ACPI or SMI code.
Change-Id: I72b59f05746b28cfb24c4f018aebc2befa9caba6
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/22796
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Enable change Ic6b8ce4a9db50211a9c26221ca10105c5a0829a0
(sb/intel/common: Automatically generate ACPI PIRQ) for BD82X6X.
This generates the main ACPI _PRT table automatically based on the
chipset registers.
Tested on Intel NUC DCP847SKE with Linux 4.13.14:
$ cat /proc/interrupts
CPU0 CPU1
0: 23 0 IO-APIC 2-edge timer
8: 1 0 IO-APIC 8-edge rtc0
9: 0 0 IO-APIC 9-fasteoi acpi
19: 86 0 IO-APIC 19-fasteoi ehci_hcd:usb1
23: 0 0 IO-APIC 23-fasteoi i801_smbus
[...MSI and other interrupts skipped...]
Log messages:
ACPI_PIRQ_GEN PCI: 00:02.0: pin=1 pirq=1
ACPI_PIRQ_GEN PCI: 00:1b.0: pin=1 pirq=1
ACPI_PIRQ_GEN PCI: 00:1c.0: pin=1 pirq=2
ACPI_PIRQ_GEN PCI: 00:1c.1: pin=2 pirq=6
ACPI_PIRQ_GEN PCI: 00:1c.2: pin=3 pirq=4
ACPI_PIRQ_GEN PCI: 00:1d.0: pin=1 pirq=4
ACPI_PIRQ_GEN PCI: 00:1f.2: pin=1 pirq=2
ACPI_PIRQ_GEN PCI: 00:1f.3: pin=2 pirq=8
ACPI_PIRQ_GEN PCI: 00:04.0: pin=1 pirq=1
Generated _PRT:
Scope (\_SB.PCI0)
{
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
If (PICM)
{
Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
0x00000000,
0x00000000,
0x00000010
},
Package (0x04)
{
0x001BFFFF,
0x00000000,
0x00000000,
0x00000010
},
Package (0x04)
{
0x001CFFFF,
0x00000000,
0x00000000,
0x00000011
},
Package (0x04)
{
0x001CFFFF,
0x00000001,
0x00000000,
0x00000015
},
Package (0x04)
{
0x001CFFFF,
0x00000002,
0x00000000,
0x00000013
},
Package (0x04)
{
0x001DFFFF,
0x00000000,
0x00000000,
0x00000013
},
Package (0x04)
{
0x001FFFFF,
0x00000000,
0x00000000,
0x00000011
},
Package (0x04)
{
0x001FFFFF,
0x00000001,
0x00000000,
0x00000017
},
Package (0x04)
{
0x0004FFFF,
0x00000000,
0x00000000,
0x00000010
}
})
}
Else
{
Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
},
Package (0x04)
{
0x001BFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKB,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000001,
\_SB.PCI0.LPCB.LNKF,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000002,
\_SB.PCI0.LPCB.LNKD,
0x00000000
},
Package (0x04)
{
0x001DFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKD,
0x00000000
},
Package (0x04)
{
0x001FFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKB,
0x00000000
},
Package (0x04)
{
0x001FFFFF,
0x00000001,
\_SB.PCI0.LPCB.LNKH,
0x00000000
},
Package (0x04)
{
0x0004FFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
}
})
}
}
}
Change-Id: I832a86925283d61b64b8268246d9e6f11994c120
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22859
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Based on change I2b5d68adabf0840162c6f295af8d10d8d3007a34
(sb/intel/common: Add function to automatically generate ACPI PIRQ).
This adds functionality to generate PIRQ ACPI tables automatically based
on the chipset registers.
Mapping of PCI interrupt pin to PIRQ is done by the chipset-specific
intel_common_map_pirq() function, an shared implementation of which is
provided for the bd82x6x, i82801, i89xx, ibexpeak and lynxpoint
chipsets.
Example generated _PRT:
Scope (\_SB.PCI0)
{
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
If (PICM)
{
Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
0x00000000,
0x00000000,
0x00000010
},
Package (0x04)
{
0x001BFFFF,
0x00000000,
0x00000000,
0x00000010
},
Package (0x04)
{
0x001CFFFF,
0x00000000,
0x00000000,
0x00000011
},
Package (0x04)
{
0x001CFFFF,
0x00000001,
0x00000000,
0x00000015
},
Package (0x04)
{
0x001CFFFF,
0x00000002,
0x00000000,
0x00000013
},
Package (0x04)
{
0x001DFFFF,
0x00000000,
0x00000000,
0x00000013
},
Package (0x04)
{
0x001FFFFF,
0x00000000,
0x00000000,
0x00000011
},
Package (0x04)
{
0x001FFFFF,
0x00000001,
0x00000000,
0x00000017
},
Package (0x04)
{
0x0004FFFF,
0x00000000,
0x00000000,
0x00000010
}
})
}
Else
{
Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
},
Package (0x04)
{
0x001BFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKB,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000001,
\_SB.PCI0.LPCB.LNKF,
0x00000000
},
Package (0x04)
{
0x001CFFFF,
0x00000002,
\_SB.PCI0.LPCB.LNKD,
0x00000000
},
Package (0x04)
{
0x001DFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKD,
0x00000000
},
Package (0x04)
{
0x001FFFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKB,
0x00000000
},
Package (0x04)
{
0x001FFFFF,
0x00000001,
\_SB.PCI0.LPCB.LNKH,
0x00000000
},
Package (0x04)
{
0x0004FFFF,
0x00000000,
\_SB.PCI0.LPCB.LNKA,
0x00000000
}
})
}
}
}
Change-Id: Ic6b8ce4a9db50211a9c26221ca10105c5a0829a0
Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
Reviewed-on: https://review.coreboot.org/22810
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
SATA was enabled only for internal testing. Since we do not use
SATA on chrome platforms, it can be disabled.
Change-Id: I907b440562b39e6d97f604e7e63b6b99e487aaa8
Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com>
Reviewed-on: https://review.coreboot.org/22875
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It seems that RAM code 0 has been strapped with an incorrect resistor on
Kevin. The resulting voltage divide still puts it well within the ADC
value bucket reserved for that slot, but a little closer to the edge
than necessary. While this doesn't seem to cause any immediate problems
on its own, it still doesn't hurt to fix it (if only for the
documentation value).
On other boards (at least on my Scarlet) the strapping seems to be
correct.
Change-Id: Ic5199834fbeaf734e725ff45b04f45eefe149855
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22891
Reviewed-by: David Schneider <dnschneid@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This patch shifts some comments around to make it easier to replace
values in the ADC strapping bucket table with compile-time conditionals.
Change-Id: Ic51917d3961a51d4e725ff824fb59aeefe149855
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/22890
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Schneider <dnschneid@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This is to add support for Denverton-AD soc.
Change-Id: I539abedd65bcbdb97b64f58d0b2273ff8eb67420
Signed-off-by: Lew, Chee Soon <chee.soon.lew@intel.com>
Reviewed-on: https://review.coreboot.org/22605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Cannonlake FSP will send debug message on selected UART port, use same
coreboot UART debug port to FSP.
TEST=Boot up with board have UART port 0 and can see the print of FSP
Change-Id: Id72e459d2fbb1f16b005d22fac66667086880384
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/22655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I74c5cc22f02302314ba010bc599051c1495a13cb
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22848
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
After the PSP receives the MboxBiosCmdBootDone, it will no longer honor
any command where the command-response buffer exists outside of SMM
memory. Add the command and automatically execute it before booting
the payload.
BUG=b:69971683
TEST=Boot Kahlee and observe console log
Change-Id: I8258a9e2f2627bf24342f927a3e7f49b49dc1d88
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22787
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use C99 designated initializers for the psp_notify_dram() buffer
structure.
Change-Id: I2e18b3a2c19b8fb17d0f654b16def52517538957
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22847
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove the frequent setting/restoring of the PSP's bus-mastering and
memory decoding settings. It is up to the caller to ensure it is
already set properly.
Change-Id: I7e29a3935df94d16de90b28ff78449d23fe01666
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A subsequent patch to the PSP library will rely on the device already
having its PCI command register set to allow memory decoding and
mastering enabled.
Program the command register ahead of loading the SMU FW1 blob in
bootblock. When the device has not been set up (e.g. when SMU FW
is not selectable), AGESA sets up the device. As a result, a
similar change is not required before sending the DRAM ready
command.
Change-Id: Id586106751286c4767b5c16ed7e1604523635492
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22876
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Not all SMM save state sizes equate to having enough stack in the
permanent SMM handler. Therefore, ensure 1KiB of stack is available for
each cpu's stack. Intel's save state size is 1KiB, but AMD's save state
size is only 512. Therefore, decouple save state size from the per
cpu stack size.
BUG=b:70027919
Change-Id: I54b9e6f3cc0ad6ca3d7b60b2b422b5dc5a78a552
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22950
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
gma.c of Nehalem was copied from Sandy/Ivy Bridge, so fix it there too.
Tested on lenovo/x230. Since both the bit that was masked wrongly and the
one that wasn't masked, but sould have been, are 0, the behaviour on
lenovo/x230 doesn't change.
Change-Id: I5f51c4929df83f948fcb7dc06e07ac3cc4ccf4f2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/22596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This change adds SPD files for memory IDs 1-4 on nami.
BUG=b:70182907
Change-Id: Ic43f944c0cde18244fe4c4d21314b831d048a3a2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22942
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Nami uses MAX98357A speaker amplifier and DA7219 codec. This patch
adds max98357a and da7219 under I2C #3 in devicetree and adds SPK DMIC
nhlt support for 4CH DMIC.
BUG=b:70646770
TEST=emerge-nami coreboot
Change-Id: Iecf4059f8ea3d5e34f33f0be227897a8cca636fa
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/22861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
ACPI bit is not set after an S3 resume, so set it in _WAK. Setting
SLPT bit can make the power LED blink in S3.
Change-Id: I2badc69510275df57938cb8607b3c4e0df50f028
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/22929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This resolves the IASL remark:
dsdt.aml 2141: Method (\ISTR, 2, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)
Change-Id: I36e814acc0746cb011b595493d8254f3fb73baf5
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/21668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This platform shares most hardware components with first-gen Core
Lenovo laptops such as T60/X60, with much smaller EEPROM size as
one of notable differences. The port features Intel graphics,
ATI-based version should work with vendor VBIOS.
Tested peripherals:
- sleep/resume,
- USB ports,
- ACPI Fn key bindings/volume buttons,
- backlight control,
- ethernet,
- wireless (under Linux),
- sound/beep,
- dock handling,
- serial via dock.
Untested peripherals:
- IrDA,
- parallel port,
- PCMCIA,
- S-Video port,
- modem,
- FP reader (should just work),
- IEEE1394.
Linux 3.16 works with native gfxinit perfectly, with Intel VBIOS
console sometimes displays nothing when i915 framebuffer is used.
Windows 7 has an interrupt assignment issue with iw3945, otherwise
tested stuff is fine.
Change-Id: I84c89cc47d3db126d827f92d50270954bc42f224
Signed-off-by: Andrey Korolyov <andrey@xdel.ru>
Reviewed-on: https://review.coreboot.org/21019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In commit decd0628 (drivers/mrc_cache: move mrc_cache support to
drivers) mrc.cache is always added, but CONFIG_MRC_SETTINGS_CACHE_SIZE
is not used in Sandy Bridge, which makes mrc.cache have zero size and
the machine will fail to boot after the first boot.
Change-Id: Iab3ac87e43408ef51f0158f319eb1c8ccfce8a55
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/22925
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Procedure write_pci_int_table() does not validates intr_data_ptr. It must
be validated together with picr_data_ptr and idx_name.
BUG=b:69868534
TEST=Build fake kahlee with intr_data_ptr not initialized, boot and see
error message. Than build correct kahlee and verify that error message
is gone.
Change-Id: I5ee9a362600dbd6325254d7431172501181b52b0
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22934
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
In function load_smu_fw1(), variable base receives one value and is
immediately overwritten. Remove the first line, as it's useless.
This fixes CID 1383612
BUG=b:70620140
TEST=Build kahlee and boot.
Change-Id: I1a1eae52722606a9e871e26faa7927e207102ae8
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22873
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add initial files to support the Saddle Brook board. This board uses the
Skylake FSP 1.1 image and does not build without the FspUpdVpd.h file.
Most of the code has been taken carried over from kunimitsu with changes
done for Saddle Brook.
Saddle Brook is a reference board for Skylake SOC and has DDR4.
TEST=Build with uefi payload and boot to Linux 4.9 on CRB successfully.
Change-Id: Ie221eb58e8ab8ff15e9ef19c1d145a5eb2921b4e
Signed-off-by: Anuj Mittal <anujx.mittal@intel.com>
Signed-off-by: Teo Boon Tiong <boon.tiong.teo@intel.com>
Reviewed-on: https://review.coreboot.org/21436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
These were forgotten when updating the caller and resulted in build
failures for every but the NGI path.
Change-Id: I2490a3b4dca6c248eb37f43aa676ae619afdbfc7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/22930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=b:70773281
Change-Id: If9b575568cabcbee03ad190b69d9c033890f7fa6
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22927
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per the latest schematics, this change configures GPP_B0 for WLAN
wake and uses corresponding gpe bit in ACPI node for WLAN. This hasn't
been tested yet.
BUG=b:70775494
Change-Id: I5198b8083a87d00f890b45986e5e3f62b81686c2
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22928
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change configures the GPIOs for pen reset and eject lines and
exports required properties using ACPI table.
BUG=b:70773138
Change-Id: I52f6c3dced54259cde8ee6753275622622e15954
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/22926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Similar to other KBL projects, this change enables AER and LTR for
root port 1 on poppy.
BUG=b:65570878
Change-Id: Iadad3d2fc46cbba575a776071305925c529a6760
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=b:62726961
Change-Id: I5a88e67d5a22f8a39427c95821ffee4f2fd717fa
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change really fixes the SataMode to select non-RAID mode and
enables SATA which was incorrectly disabled in a71276b
(mb/google/poppy/variants/nami: Fix SataMode configuration in
devicetree).
BUG=b:70160119
Change-Id: Ied6adabdc1d2458972bde628616a198cd41f9f3e
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPP_F3 is not connected on poppy or any of its variants. This change
configures GPP_F3 as NC on poppy and all the variants.
BUG=b:70160119
Change-Id: I303276ab9546d56c846755fa3a6142978f6b8c92
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22917
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Nami uses DEVSLP1 and not DEVSLP0. This change updates the GPIO
configuration for DEVSLP to match the latest version of schematics.
BUG=b:70160119
Change-Id: Ifa181322011a4b8947ecd0fa44dcf790b0d8f657
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch enables customized NIC leds as below:
Green Orange (Amber)
100M off blinking
1000M on blinking
BUG=b:69950854
TEST=Boot on fizz dut and observe the LEDs are behaving as expected.
Perform suspend/resume test and the LEDs are still working as expected.
Change-Id: Ic70587a0cd688e74b5e1ce532c5da954c80cf841
Signed-off-by: David Wu <david_wu@quantatw.com>
Reviewed-on: https://review.coreboot.org/22817
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Sync with the other AMD implementations.
Change-Id: I222cc7fcf5e58f451cee9621a1b876346226af09
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Make a static function that can report the AmdInitPost() results. This
makes it easier to keep lines within 80 columns. Clean up surrounding
source.
BUG=b:62240746
TEST=Build and boot Kahlee
Change-Id: I6d288e76e7510528659436e61fdfa1d5db01f06c
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22887
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
The AGESA wrapper should not use and CONFIG_STONEY* values, nor should
it make any assumptions about the capabilities of a particular device.
Move these into stoneyridge northbridge and southbridge files.
BUG=b:70670425
TEST=Build and run Kahlee
Change-Id: I706edbb6a048b64389ba3077d5df0fe6155070b3
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There isn't a good reason to keep the checks for __PRE_RAM__. The global
variables are not used outside of ramstage and the linker removes them
cleanly in other stages.
BUG=b:70671590
TEST=Build and boot Kahlee
Change-Id: I7a35141f212f340c157d57fde8daf93c0c383af8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The function agesawrapper_readeventlog() is not used outside of the
wrapper. Relocate it within the file and make it static.
Change-Id: Ia7fefb4eadbace0cc2fb0f519a1acb7906baaf12
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22902
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up the source for agesawrapper_amdreadeventlog:
* shorten the name to help keep lines within 80 columns
* convert initializers to C99
* break the call from the callers' if() statements
* streamline the printk formatting
BUG=b:70671442
TEST=Build and run Kahlee, check console log
Change-Id: I402c75e4d65a592b9d1557c5852df03e48e206b9
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22884
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add region.h for use by the struct region_device * in the
mrc_cache_get_current() prototype.
BUG=b:69614064
Change-Id: I940beac45eb43e804bc84fead7d5337a1c4e2ac1
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Seeing some instances were cr50 spi driver is starting a new
transaction without getting a ready interrupt from cr50, which means
that there are pending interrupts. Clearing these to be sure there
are not any stale irqs for the next transaction.
BUG=b:69567837
BRANCH=None
TEST=run FAFT and see if any 0x2b recovery boots occur
Change-Id: Ie099da9f2b3c4da417648ae10a5ba356b7a093ff
Signed-off-by: Shelley Chen <shchen@chromium.org>
Reviewed-on: https://review.coreboot.org/22909
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There's nothing intel-specific about the current mrc_cache support.
It's logic manages saving non-volatile areas into the boot media.
Therefore, expose it to the rest of the system for any and all to
use.
BUG=b:69614064
Change-Id: I3b331c82a102f88912a3e10507a70207fb20aecc
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22901
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
A non-user configurable option that defaults to y should just be
auto-selected instead of instantiating an instance of an option.
BUG=b:69614064
Change-Id: I55cf28eaf0233182d4fa488cf4b31e8ad379b6c4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The CPU_SPECIFIC_OPTIONS already auto-selects the option. There's
no point in having a selectable option that is already selected.
There's already an option to select it within intel/common.
BUG=b:69614064
Change-Id: I0c7ce7d3f344668587a75ec683343559a4caea99
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22906
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This code is not used at all any longer. Remove it.
BUG=b:69614064
Change-Id: I362280f876a335c0cc1c5691b86f5b27e3b5e2c9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Similar to Fizz, SataMode on nami should be set to AHCI. This change
fixes the configuration error done in 903472c
(mb/google/poppy/variants/nami: Add support for nami board).
BUG=b:70160119
Change-Id: Ia88b56ae6bd9121f8447f7c1a2f5a10990fb8ed5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22845
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
PCH_SPK_EN uses GPP_A23 and not GPP_A22. This change fixes the gpio
configuration error in the initial change 903472c
(mb/google/poppy/variants/nami: Add support for nami board).
BUG=b:70160119
Change-Id: I90d9c009369c53cfec47fe77356e181d5ecf7ad5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/22844
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is mostly written from scratch and uses common spd ddr2 decode
functions.
This improves the following:
* This fixes incorrect CAS/Freq detection on DDR2;
* Fixes tRFC computation; tRFC == 78 is a valid timing which is
excluded and 0 ends up being used; (TESTED)
* Timings selection does not use loops;
* Removes ddr3 spd decode and is re-added in follow-up patches using
common ddr3 spd functions;
* Raminit would bail out if a dimm was unsupported, now in some cases it
just marks the dimm slot as empty;
* It dramatically reduces stack usage since it does not allocate 4
times 256 bytes to store full SPDs, amongs other unused things that
were stored in sysinfo;
* Reports when no dimms are present;
* Uses i2c block read to read SPD which is about 5 times faster than
bytewise read, with a fallback to smbus mode in case of failure,
which does seem to happen when the system is forcefully powered
off.
Change-Id: I760eeaa3bd4f2bc25a517ddb1b9533c971454071
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19143
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
There's no sense in having the nvm abstraction in its own files. Put
that support directly into mrc_cache.c.
BUG=b:69614064
Change-Id: I0f1a801c6e1a8c35f70faf9e4318bdc45955047a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Implement the spi controller flash_protect() callback. No need to
have a global spi_flash_protect() once implemented.
BUG=b:69614064
Change-Id: I83f4310d8f78ba64727ba75eb75708d0cbaa7d53
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22882
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In the fast spi support implement the callback for flash_protect().
This removes the need for having SOC_INTEL_COMMON_SPI_FLASH_PROTECT
Kconfig option as well spi_flash_get_fpr_info() and separate
spi_flash.[ch].
BUG=b:69614064
Change-Id: Iaf3b599a13a756262d3f36bae60de4f7fd00e7dc
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Now that there is spi flash controller flash protection use that API
so the spi_flash_protect() API can be sunsetted since it was isolated
within the Intel code base.
BUG=b:69614064
Change-Id: I3908d0e3105b0ef9a0fbf4fc9426ac1be067f648
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide a spi controller specific protection callback to take
advantage of special spi flash controllers that have internal
protection registers built into the implementation. It's an
optional callback for spi controllers.
BUG=b:69614064
Change-Id: Ie50a6ce3bbda32620a25dd26fda1af944940bf28
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22879
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Export region_is_subregion() for determinig if a region is a child of
a parent region.
BUG=b:69614064
Change-Id: I6363fe4fdb33342f9d025a726ec7e17e87adf7e0
Signed-off-by: Aaron Durbn <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22878
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Melfas kernel TS driver (melfas_mip4.c) will look up "ce"
GPIO during driver probe in ACPI _DSD.
But FW does not report "ce-gpios" but "enable-gpios" in _DSD.
Kernel will obtain GPIO from _CRS by index "0" without ID.
Melfas driver does not have separate condition
for MIT-410 so driver will set TS IC power off in probe.
FW now may need to add back "reset" pin in order to hack
this condition to let Melfas driver get "useless" GPIO
so TS IC power (VTSP) will be not off during driver probe by itself.
BUG=b:70149336
BRANCH=reef
TEST=emerge-snappy coreboot
Change-Id: Icf0451ff0c3df97cb2474e30542a2f46ba67d82a
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/22858
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
For Fizz, the default should be AHCI mode and not RAID
mode. Additionally, there is only one drive connector, so
attaching several drives for a RAID is hard.
BUG=b:70146894
Change-Id: I2a9aa2d6281a916c00ff4659a927f164ba0e0705
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/22837
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove Kconfig selected symbols that are duplicates in the same file.
Change-Id: I21a3814131f0c8e08732e826dd1bcbb677cbe0aa
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/22852
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Solve issues related to agesawrapper_call.h that came up at review
75dd50e233 (review 19724). This includes a hard coded table size and
2 macros: AGESAWRAPPER_PRE_CONSOLE() and AGESAWRAPPER().
Remove AGESAWRAPPER_PRE_CONSOLE(), and replace AGESAWRAPPER() calls with
the actual content of the macro.
BUG=b:62240989
TEST=Build kahlee with no errors, boot recording serial output and compare
to serial output from a build without these changes.
Change-Id: Ic51917d3961a51d4e725ff45b04f45eefe149855
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22850
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add parameters to configure the integrated LAN via FSP. Since
this takes over a PCI CLKREQ# pin it needs to know which pin
it should use, and there are additional parameters for LTR and
a "K1 power save" feature.
This was tested on a KBL-R board with integrated LAN, verifying
that the device is functional under Linux with the e1000e driver.
Change-Id: Idb200cec90a3c0d4d9c914bae9983a3bcdafcd06
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/22856
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the flashconsole driver in verstage so it can be used
with VBOOT enabled. This was tested on a VBOOT enabled system
using flashconsole to store the boot log.
Change-Id: Icd8a82dc962ece85b9fb3d2f5654369e821922eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/22855
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The opregion and fields are left over from when ACPI ASL code was
reading registers to determine the current setup. Now that the
ACPI device is generated with the correct information already this
code is not used at all and can be removed from the tree.
Change-Id: If89d90cc7105ed21e2134ac99224f6f8214cc8ad
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/22854
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Required so Windows knows if the storage is removable or not.
Change-Id: I0822d767ada872d55357ff229e47e08fbe778a36
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: https://review.coreboot.org/22830
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SOC_INTEL_COMMON_LPSS_I2C option is no longer used. Likewise, the
SOC_INTEL_COMMON_LPSS_I2C_DEBUG option which is dependent on
SOC_INTEL_COMMON_LPSS_I2C is by definition not used either. Therefore,
remove SOC_INTEL_COMMON_LPSS_I2C and change the name/dependency
for SOC_INTEL_COMMON_LPSS_I2C_DEBUG to SOC_INTEL_COMMON_BLOCK_I2C_DEBUG.
BUG=b:70232394
Change-Id: Icd77f028b77d8f642690a50be4ac2c50d9ef511a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/22874
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Chris Ching <chingcodes@chromium.org>
|
|
Configure PRMRR to allocate 128MiB for SGX enclave memory and enable SGX
by default for GLKRVP platform.
Supported PRMRR size options:
0x02000000 - 32MiB
0x04000000 - 64MiB
0x08000000 - 128MiB
Change-Id: Ifa39df4a1da84bae49551a9626257bda0729752b
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/21278
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
include helpers.h in chip.h so that devicetree can use macros from helpers.h
Change-Id: Idfdee637a9b66a30be31b9ed113e1a44e4032f34
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/22774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Cannonlake rvp serial log has been regressed with commit
I7eea910e065242689e87adac41281131674b39af(soc/intel/cannonlake:
Clean up UART code) because of common UART code is unable to
link all __weak function implementation from SoC uart.c due
to existing macro #define __SIMPLE_DEVICE__. Hence UART2 PCI
device resource programming is different than what it's been programmed
before.
This patch ensures UART2 PCI device resource enumeration is
working and we are getting serial log as expected.
Change-Id: I1f9df5e8d6490090ed65b06bdd0b40f824d36a8a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/22862
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The overcurrent pins on kahlee weren't mapped correctly, causing
the USB-A port to stop working.
None of the EHCI only ports are used for external connectors, so all
of the overcurrent pins should go to the XHCI connections. This is
also true of the Grunt board.
On Grunt, this also means that we don't need OC3, as it doesn't map
to anything in the XHCI controller, as it's coming from an internal
hub.
BUG=b:70636233
TEST=Build & boot Kahlee, verify USB-A port is working again.
Change-Id: I53336a18a26bd9be27c7265fddbcd780632656bf
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/22860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
This patch enables the APLS touchpad in glkrvp platform.
TEST= Boot and test touchpad works.
Change-Id: I6f52f7db57ab52b5531e647bde2adbb78b40f76f
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/22627
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
