| Age | Commit message (Collapse) | Author |
|---|
|
Because SPL fuse needs to be set before the FW lock. So enable
Markarth project to send the fuse SPL (security patch level)
command to the PSP.
BUG=b:279499511
BRANCH=none
TEST=FW_NAME="Markarth" emerge-skyrim coreboot chromeos-bootimage
Then get "PSP: SPL Fusing Update Requested." in the firmware log.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I8fbbd89d11b1bdb2c95c761955c10bedb366fd70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74753
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
walkcbfs_asm is a simple CBFS implementation in assembly to find a file
on a system with memory-mapped SPI flash. It seems to be mostly unused
nowadays and is only still called for early microcode loading on some
old systems (e.g. FSP 1.1 and older).
Using this implementation with CONFIG_CBFS_VERIFICATION is unsafe
because it does not verify the hashes the way the normal CBFS code does.
Therefore, to avoid potential security vulnerabilities from creeping in,
this patch makes sure the code cannot be compiled in when
CBFS_VERIFICATION is active. That means it won't be supported on the old
boards using this for microcode loading.
Ideally CONFIG_CBFS_VERIFICATION should have a `depends on` to make this
dependency more obvious in menuconfig, but the configs actually using
this code are not easy to untangle (e.g. CONFIG_MICROCODE_UPDATE_PRE_RAM
is just set everywhere by default although only very few boards are
really using it, and a lot of different old Intel CPU models are linking
in src/cpu/intel/car/non-evict/cache_as_ram.S without being united under
a single Kconfig so that's not easy to change). To keep things simple,
this patch will just prevent the code from being built and result in a
linker error if a bad combination of Kconfigs is used together. Later
patches can clean up the Kconfigs to better wrap that dependency if the
affected boards are still of enough interest to be worth that effort.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I614a1b05881aa7c1539a7f7f296855ff708db56c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74243
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update Samsung 4G K3KL6L60GM-MGCT support
BRANCH=None
BUG=b:243337816
TEST=emerge-skyrim coreboot
Change-Id: I89b9798c16635a32dff12f1c0b65737d3c16cd59
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch adds new USB_DB FW_CONFIG to enable support for USB4 ANX7452
Rev 2.
BUG=b:279647370
TEST=Able to build and boot google/rex with Proto 2 SKU
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I878b591e5919d05d3c5fc2eefdeb492e95d4f7b5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74775
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Set edp_panel_t9_ms to 8ms which means it will delay 8ms
between backlight off and vary backlight off.
BUG=b:271704149
BRANCH=Skyrim
TEST=Build; Verify the UPD was passed to system integrated table;
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: I952d05b18e29cf30256f43562a5052007c5c6268
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74790
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD parameter for eDP power sequence adjustment.
The edp_panel_t9_ms parameter is set for bloff to varybloff.
BUG=b:271704149
BRANCH=Skyrim
TEST=Build; Verify the UPD was pass to system integrated table.
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Id651c9cc4d6f4e27f6c78ca10ca12936d66ef43b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74789
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add UPD edp_panel_t9_ms for eDP panel sequence adjustment.
BUG=b:271704149
BRANCH=Skyrim
Test=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Idc1a212e9c203584a6497fd6cbd3f995eeb030f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74788
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the UPD pwr_on_vary_bl_to_blon to edp_panel_t8_ms to
match the eDP sequence timing in milliseconds.
BUG=b:271704149
BRANCH=Skyrim
Test=Build/Boot to ChromeOS
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Change-Id: Iecdfe47cd9142d8a1ddeee0ec988d37b2a11028e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74787
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Instead of having multiple instances of the same magic numbers in the
code, introduce and use the PCI_IO_CONFIG_INDEX and PCI_IO_CONFIG_DATA
definitions.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If6f6f058180cf36cae7921ce3c7aaf1a0c75c7b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74791
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update devicetree to support ELAN I2C generic touchscreen.
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I2779c2930d89ff42233f9b20bd8abdf6dc00c0e0
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74776
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
TEST=fsp_print_guid() output doesn't get cobbled with other serial
output and now separated by a newline character.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8d47dbc5d493f86f14a1bbcf9cb5c16c0e12b841
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74781
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The MIPI panels will be used on the detachable variant starmie, and
there will be different MIPI panels used on starmie. In order to make
the different panels functional on unprovisioned devices, it needs
to pass the SKU ID and panel ID to the payload to load the matched
device tree for kernel. From the schematic, the starmie variant
will read the LCM ID from ADC channel 5.
BRANCH=corsola
BUG=b:275470328
TEST=boot starmie and see FW screen display
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I6339dc3c177fb8982f77fb3bd32dc00da735fce4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
Change-Id: I80aa71b813ab8e50801a66556d45ff66804ad349
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74600
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
It is unused. The use of field irq is problematic as it should
appear relative to IOAPIC GSI bases in the devicetree.
Change-Id: I460fd5fde3a7fba5518ccfc153a266d097a95a39
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The signals for the NV33 regulator were swapped (enable and power
good). Switch these back to the way they should be:
GPIO_NV33_PWR_EN GPP_E1
GPIO_NV33_PG GPP_E2
BUG=b:269371363
TEST=builds
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Ic2a53103e1feadd7ecebd4bed02dcc34410b8e3b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Change-Id: I8b536f8a1ff4eab06f37aec0f25704525dc1b64e
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Because WD SSD drive isn't holding the clock low for some reason.
So we change to read eMMC clkreq signal instead.
BRANCH=none
BUG=b:274377518
TEST=emerge-skyrim coreboot chromeos-bootimage and verify ok.
Change-Id: I1329386631dc54209db54ac146e4aafe95b6a3ac
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch implements helper function get_cse_ver_from_cbfs() to
retrieve the CSE Lite version from CBFE RW's metadata and calls
the helper function from cse_check_update_status()
TEST=Verified CSE Lite version in coreboot boot log
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Change-Id: Ie1bf186adfc3f87826a7ce9b0167a6bbe6767299
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74755
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
|
|
By default, coreboot includes support for all the different types of SPI
ROMs. Excluding the unused ROM types shrinks ramstage by almost 4k.
BUG=b:267735039
TEST=Build & Boot ROM
BRANCH=Skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If6e402269d1f2cac8256d478eb36743441497bdf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72769
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Commit c7b8809f155a ("soc/amd/common/block/gfx: Use TPM-stored hash
for vbios cache validation") replaced checking the vbios signature
(first two bytes) with checking against a TPM-stored hash, but there
exists an edge case where the empty cache can be hashed and therefore
never updated with the correct vbios data. To mitigate this, re-add
the signature check to ensure that an empty cache will never be hashed
to TPM.
BUG=b:255812886
BRANCH=skyrim
TEST=build/boot skyrim w/selective GOP enabled, flash full firmware
image, ensure GOP driver is run until cache updated with valid data
and hashed to TPM.
Change-Id: Id06a8cfaa44d346fb2eece53dcf74ee46f4a5352
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
In order to make supported sleep states a runtime configuration option
use a variable. A follow-up patch will implement updating this variable
based on an SSDT generated IntObj.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6910c2c75e668e6f75a6f431813edeb59d52dd93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Since skylake Intel hardware does not support this sleep state. Trying
to enter S1 by having the OS enter sleep results in a system hang on at
least Alder lake (prodrive/atlas).
CONFIG_SOC_INTEL_COMMON_BLOCK_PMC is a good proxy whether devices
support 'skylake style' PMC PCI device for ACPI registers.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic9e19410696240755e8714db53a0525284f3a2da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Remove rtd3 for emmc device on taeko
BUG=b:271003060
TEST= emerge-brya coreboot, flash to DUT and can boot to OS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I21191c9762a00ba137892e680d533f7dc3b53e86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Remove rtd3 for emmc device on taniks
BUG=b:271003060
TEST=emerge-brya coreboot, flash to DUT and can boot to OS
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: I03168ecbf4611f05acd8c6c722b6a5037a8cc31d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This will fix:
> [INFO ] Probing TPM I2C: tis_plat_irq_status() not implemented,
wasting 20ms to wait on Cr50!
BUG=b:277297687
TEST=builds
Change-Id: I611a2855d94167748d0f82a478687fe2cdf5846a
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74286
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure PCIe Clk Source and Clk Request mapping. Configure GPIOs used
for WLAN. Mapping derived from myst schematic.
BUG=b:275965982
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I5059be0bc011978e74ab4245e6ae037aa177ef9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Ensure that DXIO descriptors are updated using info from AMD and Myst
board schematics.
BUG=b:275960920,b:276744321
TEST=builds
Change-Id: Icdad785bcb90de036095bcc4219c15f55f4277fe
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74112
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This mainboard has SD slot available and therefore it should be enabled.
Use the same SD card configuration as for mc_ehl2 mainboard.
Change-Id: Icd9b25301311679cf93b05ba83a24e551261a020
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This mainboard has the RTC RV-3028-C7 connected to the I2C1.
TEST:
- Console Log shows no errors for RV-3028-C7 during I2C1 init
- Finalize device for I2C 00:52 shows correct date and time
Change-Id: I1b4115d7844a0c218fdf92cb1af2da5a95eb4337
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74652
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Correct the USB settings, suitable for this mainboard.
Change-Id: I943eb891e2f2d967acfd441c085063dbad49e993
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74651
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the default
value of the Kconfig switch EARLY_PCI_BRIDGE_FUNCTION must be set to
'0'. On this mainboard NC FPGA is connected to PCIe root port #1
(00:1c.0).
Change-Id: I15035523d8575d486c3f2d0ffe3916712ee89d7d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Since mc_ehl4 was only a copy of mc_ehl1 in a first step, the GPIOs must
be adjust according to the circuit diagram for this mainboard.
Change-Id: I66bfbb380e9a05b3a2c08d5d1980e9749b46ee43
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The patch disables Tccold Handshake to prevent possible display
flicker issue for Omnigul board. Please refer to Intel doc#723158
for more information.
BUG=b:279539826
BRANCH=firmware-brya-14505.B
TEST=Verify the build for Omnigul board
Change-Id: I04e54df5afe09c12e1cf774445d57e13ffd8819e
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74737
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iae2dc0a934f0ea3ca59d8a811f1daeedb090a7bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71717
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Fix copy-paste comment on closing endif
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9671a9228c304988eb3903391f74a21d80d0a8bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I799f61d13f7ae3ea753869ded282c14ed566793a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
For the first IOAPIC, use the common MADT generator with
default IRQ overrides.
Change-Id: Ie6e3eae1728a9a94205ec59557d4af1655191166
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: I2de941071fca6f7208646a065a271fbf47ac2696
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74354
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
For uni-processor platforms, with SMP=n or MAX_CPUS=1,
neither the LAPIC or IOAPIC MADT entries are added.
Change-Id: I8777f4e3b37fe7b564189c6bf48e3988026b2361
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
IRQ override from IRQ #0 to GSI #2 is changed from
MP_BUS_EISA to MP_BUS_ISA.
Change-Id: I115df037fd79e120b04e6aff9e53f963f045b997
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: I3a61a0ceb0e6e4a09570beef6d0170354eb498ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: Iab3d38da9610ede1d338440b4a8ec0f1537c17e6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
i82801gx, i82801ix, i82801jx:
Maintain IRQ #0 to GSI #2 override as positive edge trigger.
ibexpeak, emulation/qemu-q35:
Change IRQ #0 to GSI #2 override to positive edge trigger from
the bus ISA default (positive edge).
Change-Id: Ia8a04daf3a79d9f2f4801dc85e4975278e30dc8a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add Kconfig COMMON_ACPI_MADT_IOAPIC to replace platforms'
implementations of adding IOAPIC and IRQ override entries
for ACPI MADT tables.
Platforms that have a more complex MADT may continue to
add custom entries using CUSTOM_ACPI_MADT.
Change-Id: I0b77769f89cc319ad228eb37bc341e2150b8a892
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74348
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Platform needs to implement this to provide information about SCI IRQ
pin and polarity, to be used for filling in ACPI FADT and MADT entries.
Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to ACPI Release 6.5 systems supporting PIC (i8259)
interrupt mechanism need to report IRQ vector for the SCI_INT
field. In PIC mode only IRQ0..15 are allowed hardware vectors.
This change should cover section 5.2.9 to not pass SCI_INT
larger than IRQ15. Section 5.2.15.5 needs follow-up work.
Care should be taken that ioapic_get_sci_pin() is called
after platform code has potentially changed the routing
from the default.
It appears touched all platforms except siemens/mc_aplX
currently program SCI as IRQ9.
Change-Id: I723c207f1dcbba5e6fc0452fe1dbd087fad290ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibaf2d7105e7a5da8a50ef32b682978ff55fe31e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibe5d84c8fbff79cc73b01eee0980cbed71ceb506
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These functions are only used in one compilation unit.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6f8282f308506a68b14ce3101f11078cb13709f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74756
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
USB port 6 connects to a USB front camera, it should always probe.
Remove probe by rear camera fw_config.
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I554046718f6e0eb7197970f9a3808b3e1ea7f99c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74714
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Update devicetree
-Enable USB2 port5 for WWAN
-Update OVTI8856 setting
-Update USB2/3 Type-A 0/1 port location
Probe devicetree based on FW_CONFIG
-pen garage
-rear mipi cam
-USB WWAN
BUG=b:273791621, b:276369170
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I6cc7be2309483ce016bde57db34af078bd4d46b0
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
BUG=b:277294070
TEST=None
Change-Id: I0aa4e0bcfb06e5e5cb7e9d52f2d82b5818925267
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74284
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement `smm_mainboard_pci_resource_store_init` to store the
resources for XHCI devices. These stored resources are later used by
the elog code to log XHCI wake events.
BUG=b:277273428
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I608d51f438681ac529323c23cc707845a3d609d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74281
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable gfx_hda to allow for audio over hdmi.
BUG=b:277219546
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I58096f1408f66f968af1494e487cf2bfc43b9a0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74278
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the crypto device to the devicetree.
BUG=b:277214359
TEST=builds
Change-Id: I5394c5f9df64642d8633af84cf662652bd1a5cb2
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74275
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix after 'commit 69a13964ea6c ("sb,soc/amd,intel: Add and use
ACPI_COMMON_MADT_LAPIC")' broke interrupt delivery in kernel.
Apparently combination of LAPIC without IOAPIC is too rare
to be well supported.
Change-Id: I5e2fbf358cf644665b897afb0a9404abb5ca1df2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74472
Reviewed-by: Branden Waldner <scruffy99@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This fixes a clang warning.
Change-Id: I017ed8601e6ec4c66487e9a6f31e93251515e686
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74554
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This fixes clang compilation warnings about logic problems and
superfluous brackets.
Change-Id: Ib4333b834ee2afb3147edf4c223724a851f159ba
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xixi Chen <xixi.chen@mediatek.corp-partner.google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
This fixes clang warning about set but unused variables.
Change-Id: I3a3345e33380862d6939b61485f6d1eefa3d1815
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74547
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
Add the missing 'b' to the 4gb so that get_top_of_mem_above_4gb is in
line with get_top_of_mem_below_4gb.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9170372d8b0c27d7de3bd04d822c95e2015cb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Glinda doesn't have an eMMC controller and also doesn't have GPIO pins
that eMMC signals can be multiplexed on, so drop the eMMC related code
from Glinda.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I49ead01075780ea97dae99a36632f7659fd00587
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74662
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Phoenix doesn't have an eMMC controller, so remove the remaining eMMC-
related defines.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I412c968479d23deb7f2e060b26b4a56ec9c764f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Mendocino and Rembrandt don't have an eMMC controller and also don't
have GPIO pins that eMMC signals can be multiplexed on, so drop the eMMC
related code from Mendocino.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8ec49a7084bdd62e480baee75a280fde8b13d01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:268342532
BRANCH=firmware-octopus-11297.B
TEST=Observe kernel ec panic handler run when ec panics
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I37e566e459f39f8bc2dafc3c3915260259730ca6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add boxy supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K4U6E3S4AB-MGCL
2. Hynix H54G46CYRBX267
3. Micron MT53E512M32D1NP-046 WT:B
BUG=b:278983561
TEST=Use part_id_gen to generate related settings
Signed-off-by: kevin3.yang <kevin3.yang@lcfc.corp-partner.google.com>
Change-Id: I317f2b31774627706babdea10776af05ab692d1e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Yavilla board memory id setting references to yaviks.
This CL aligen it with yaviks.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
H9JCNNNBK3MLYR-N6E 0 (0000)
H58G56AK6BX069 2 (0010)
K3LKBKB0BM-MGCP 2 (0010)
H58G56BK7BX068 3 (0011)
MT62F1G32D2DS-026 WT:B 3 (0011)
K3KL8L80CM-MGCT 3 (0011)
H58G66BK7BX067 4 (0100)
MT62F2G32D4DS-026 WT:B 4 (0100)
K3KL9L90CM-MGCT 4 (0100)
H58G66AK6BX070 5 (0101)
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I4a5eb9e6e87a4adbc23f94f0eb92d5452c50e47c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
To aid in layout, the PCI ports for LAN and SD card were swapped.
SD Card is now on RP3 (clksrc 4)
LAN is now on RP8 (clksrc 3)
BUG=b:269371363
TEST=builds
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: If59849c13e4c42f00e3571c0385994ade5931adb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set power limit values dynamically based on Meteor Lake
CPU TDP and PCI ID of SKU.
BRANCH=None
BUG=b:270664854
TEST=Built and verified power limit values for 15W SKU on Rex board
Change-Id: I20c9bc21dfa79696b07c460dbcedb4fa51838bdb
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The patch disables PCH USB2 PHY power gating to prevent possible
display flicker issue. Please refer Intel doc#723158 for more information.
BUG=b:279117758
BRANCH=firmware-brya-14505.B
TEST=Verify the build for marasov board
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I5a5199be768fc59e2f053f8c50a49247145e7e72
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The STARYU is the mt8186 detachable reference design, and the STARMIE
is a variant of STARYU. Let's rename the common config from STARMIE
to STARYU, and we can select the STARYU config for the follow up
mt8186 detachable variant.
BRANCH=corsola
BUG=b:275470328
TEST=./utils/abuild/abuild -t google/corsola -a
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: If75e94e86420b0a216fe7a1a9dee9cb42bbd985c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74654
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: I658596da1d84b486126d751b6066c3efd3f65290
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74523
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
These strings are now only expanded in lib/identity.c.
This improves ccache hit rates slightly, as one built object file
lib/version.o is used for all variants of a board. Also one built
object file lib/identity.o can become a ccache hit for successive
builds of a variant, while the commit hash changes.
Change-Id: Ia7d5454d95c8698ab1c1744e63ea4c04d615bb3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I95916e409b3fbd4941a861054733a34100244da9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Since it's an internal bus, it's PCIE_ABC_C_DEVFN and not
PCIE_GPP_C_DEVFN. This also makes it consistent with the rest of the
internal PCI buses.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ica8b666161c3cd3b0b4a29f8a4b0aff473b4d833
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
In the PPRs #57019 Rev 3.03 and #57396 Rev 3.04, SMITYPE_XHC3_PME,
SMITYPE_XHC4_PME and SMITYPE_CUR_TEMP_STATUS_5 are defined, so add those
defines. When doing the initial update for Phoenix, at least XHC3 and
XHC4 PME events were missing from the PPR. Those two are the PME events
of the two USB4 controllers. SMITYPE_XHC2_PME doesn't exist on this SoC.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6fff9175b73cc9d0fd324d4a568a5761b92d078
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Now that the code is in a much better shape and uses native coreboot
functionality to perform the initialization, rename the file from
fixme.c to cpu_io_init.c to be more descriptive of what it does.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97d1ac2b12c624210c570f189f825409bd64f318
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74659
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The patch makes `cse_get_fpt_partition_info()` AP local/static as all
the references to this function are in local to the cse_lite.c file.
BUG=b:273661726
TEST=Able to build and boot google/marasov with this code change.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie50453946c8abe55c29e9001263f0264a73c8fac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74388
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Google Brya variants like Nissa family selects
`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` to store CSE FPT
information.
BUG=b:273661726
TEST=Able to build and boot google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I234b5d272077de9a6f0a9ba69fa015cda7ebd56c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74387
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch implements `soc_is_ish_partition_enabled()` override to
uniquely identify the SKU type between UFS and non-UFS to conclude
if ISH partition is enabled and need to retrieve the ISH version from
CSE FPT by sending HECI command.
TEST=Able to uniquely identify the UFS and non-UFS SKUs while booting
to google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7771aebb988f11d9d1b2824aa28e6f294fd67c25
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74532
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the `SOC_INTEL_CSE_SEND_EOP_ASYNC' flag to request End-Of-Post
right after PCI enumeration and handle the command response at
`BS_PAYLOAD_BOOT'.
With these settings we have observed a boot time reduction of about
100ms on google/rex.
TEST=Tests on google/rex with `SOC_INTEL_CSE_SEND_EOP_ASYNC' show
End-Of-Post after PCI initialization and EOP message received at
`BS_PAYLOAD_BOOT'.
Change-Id: I27b540eeddcada521eba91fcc51504831d6dc855
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Select EC_GOOGLE_CHROMEEC_SKUID and EC_GOOGLE_CHROMEEC_BOARDID to
provide common routine for reading skudid and boardid from Chrome EC.
BUG=b:277293398
TEST=builds
Change-Id: I8e42ba23dada9771f335df34275e44e51d645596
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74283
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use D3COLD_SUPPORT Kconfig option to adjust the maximum supported sleep
state in ACPI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ifa55a19727e6adb6864158c2c323d08a0c22b996
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
sbadaddr and mbadaddr are deprecated names. This fixes compilation with clang.
Change-Id: I5c8fa82b6131dec10f55e8ebcf36b34e30b57bad
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The suffixes zicsr and zifencei are assumed by default for clang.
Change-Id: I75947f614c3600d5d9d461970159f0787fd6c3de
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I5b53765453bac0fc96e9651ab347069c7c8bf058
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73384
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN. The purpose of using this mutex is to prevent OSPM from
calling _ON and _OFF methods while WWAN kernel driver is calling _RST,
which accesses the GPIO pins.
BUG=NA
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I809eb84cb1a09deb168040e83041b65237a1b576
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73383
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
This adds RTD3 RPMX mutex to the root port. It is shared between RTD3
and WWAN.
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the root port.
The RPMX mutex should be generated under the root port.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia87b5f9d8300d6263c84a586256424799d3a45b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73382
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch creates .final hook to call into get ISH version function
if platform has required config
(`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support.
BUG=b:273661726
TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch stores the ISH in the CBMEM table. It verifies CSE has been
updated by comparing previous and current CSE versions. If it has, the
patch updates the previous CSE version with the current CSE version. It
then updates the CBMEM table with the current ISH version.
BUG=b:273661726
TEST=The current and old CSE and ISH versions are verified on the
google/nissa during cold and warm reboots.
Additionally, version updates are verified by a debug patch that
purposely updated the stored cse version.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ie5c5faf926c75b05d189fb1118020fff024fc3e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74208
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
The patch implements an API that stores the CSE firmware version in the
CBMEM table. The API will be called from RAMSTAGE based on boot state
machine BS_PRE_DEVICE/BS_ON_EXIT
Additionally, renamed ramstage_cse_fw_sync() to ramstage_cse_misc_ops()
in order to add more CSE related operations at ramstage.
This patch also adds a configuration option,
'SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION', which enables the storage
of firmware version information in CBMEM memory. This information can be
used to identify the firmware version that is currently installed on the
system. The option depends on the `DRIVERS_INTEL_ISH` config and
platform should be flexible enough to opt out from enabling this
feature.
The cost of sending HECI command to read the CSE FPT is significant
(~200ms) hence, the idea is to read the CSE RW version on every cold
reset (to cover the CSE update scenarios) and store into CBMEM to
avoid the cost of resending the HECI command in all consecutive warm
boots.
Later boot stages can just read the CBMEM ID to retrieve the ISH
version if required.
Finally, ensure this feature is platform specific hence, getting
enabled for the platform that would like to store the ISH version into
the CBMEM and parse to perform some additional work.
BUG=b:273661726
TEST=Able to build and boot google/marasov.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I923049d2f1f589f87e1a29e1ac94af7f5fccc2c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74256
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The mp2 PCI device is still present when no mp2 firmware is loaded. When
this device isn't explicitly enabled in the mainboard's devicetree, the
chipset devicetree default of the device being disabled is used. This
results in coreboot's resource allocator not allocating resources to
the device and since the bridge doesn't have enough MMIO space reserved,
the Linux kernel can't assign resources to it. Enable the mp2 device in
the mainboard's devicetree so that it gets its resources assigned by
coreboot.
BUG=b:277217097
TEST=builds
Change-Id: I21885c51ff08846b456675090946f381843ef5e6
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74277
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable the audio co-processor in the device tree.
BUG=b:277214614
TEST=builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I1e1749359804960bbd75d869385b9071e7f33be7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74276
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because WD SSD drive isn't holding the clock low for some reason.
So we change to read eMMC clkreq signal instead.
BRANCH=none
BUG=b:278495684
TEST=emerge-skyrim coreboot chromeos-bootimage and verify ok.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I3a9225473a6ae1ba01dc8e5d982c4999f073267e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74583
Reviewed-by: Chao Gui <chaogui@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
TEST=Timeless build for pcengines/apu2 results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If95eb9e5135de2b256d1f584afcedfd6e0cf8d8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
TEST=Timeless build for pcengines/apu2 results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If96f4655a3b4dc621ef77c4d97d2927565d634ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use coreboot's native PCI access functions instead of using the
vendorcode's PCI access functions to set up the CPU IO routing in
function 1 of the HT PCI device. This file still has room for
improvement, but at least it's now using coreboot-native functionality.
Stoneyridge has a nicer implementation, but looking into possibly
unifying those is out of scope for this patch.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ieecc0e5f6576a838d79220b061de81e21b5d976c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
When one of the General-Purpose PCIe bridges is not used, it doesn't
show up on the PCI bus at all, so coreboot notes it as an issue in the
devicetree. This happens even if the device is marked as off.
To solve this, we're marking the GPP bridge devices in devicetree as
hidden, so they'll only show up in devicetree if they're actually used
on a mainboard.
BUG=b:277997811
TEST=Build
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7b7577baa2dbb0ea7ebbcdb1a8ae81770e61d76f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74527
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When one of the General-Purpose PCIe bridges is not used, it doesn't
show up on the PCI bus at all, so coreboot notes it as an issue in the
devicetree. This happens even if the device is marked as off.
To solve this, we're marking the GPP bridge devices in devicetree as
hidden, so they'll only show up in devicetree if they're actually used
on a mainboard.
BUG=None
TEST=Don't see the "PCI: Leftover static devices:" warning for these in
the boot console.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I517776e4dedc70e957a0c836ab3c2e5d49e156d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74526
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This change adds the VPU into the DMAR SATC table in order to support
the VPU IO virtualization.
BUG=None
TEST=Enabled the VPU, booted to kernel and verified that DMAR SATC table
includeded the VPU entry.
Change-Id: I6d4af7c9844e33483a1e616eaee061a90d0be6fc
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch refactors cse_fw_sync() function to include timestamp
associated with the CSE sync operation.This effort will ensure the
SoC code just makes a call into the cse_fw_sync() without bothering
about adding timestamp entries.
TEST=Able to build and boot google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib5e8fc2b8c3b605103f7b1238df5a8405e363f83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
