| Age | Commit message (Collapse) | Author |
|---|
|
Corrected platform ID and added timer frequency for SOC.
The timer frequency is half the CPU frequency.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; behaves as expected.
BRANCH=none
Change-Id: If7e03232106b52f2522fc7da586bdaf95f5eefec
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d94789950d5300bbe5defbf529480d8d545e743e
Original-Change-Id: I1187e4b5280eaf796777d882a2e154e2808e9e37
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241426
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9193
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With this descriptor added ramstage properly allocates memory
resources and creates entries in coreboot table. This also allows to
proceed to booting depthcharge, as it now can be loaded into the
existing memory.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the set of patches applied the firmware properly finds
depthcharge in CBFS, uncompresses it and attempts to start:
...
Booting payload fallback/payload from cbfs
Loading segment from rom address 0x9b000058
code (compression=1)
New segment dstaddr 0x80124020 memsize 0x2099a0 srcaddr 0x9b000090 filesize 0xbbe
Loading segment from rom address 0x9b000074
Entry Point 0x80124038
Loading Segment: addr: 0x0000000080124020 memsz: 0x00000000002099a0 filesz: 0x0000000000000bbe
lb: [0x0000000080000000, 0x0000000080013858)
Post relocation: addr: 0x0000000080124020 memsz: 0x00000000002099a0 filesz: 0x0000000000000bbe
using LZMA
[ 0x80124020, 8012596c, 0x8032d9c0) <- 9b000090
Clearing Segment: addr: 0x000000008012596c memsz: 0x0000000000208054
dest 80124020, end 8032d9c0, bouncebuffer 8ffd4f50
Loaded segments
BS: BS_PAYLOAD_LOAD times (us): entry 129 run 34579421 exit 129
Jumping to boot code at 80124038
ERROR: dropped a timestamp entry
CPU0: stack: 9a00c800 - 9a00d800, lowest used address 9a00d498, stack used: 872 bytes
entry = 80124038
Change-Id: I15809e146407d66b04f2a97c47c961fdccb8e175
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a1577c5532a064426a3ea88b6f7f30ccdae24eaf
Original-Change-Id: Ifed5550f2c18430e9ae06ad1ecacaa13191b5995
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232571
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9192
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With the code now running on the FPGA board it makes sense to correct
the memory layout definitions to match the actual hardware.
Note that the latest FPGA board firmware introduced support of the
additional 128KB of SRAM (called GRAM) at base address of 0x9a000000.
These are still interim values, which will be tweaked when the actual
bring up board is available.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=the code put into SPI NOR flash boots all the way to ramstage.
Change-Id: I00aa5bc3aabba50df2187bb208cf2fcd11b26b3d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a6378be5cd304744b40c57a34d7a276233d45779
Original-Change-Id: I50183c2d5f9017801d5c8a7a7addf08efa492b35
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229203
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9337
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is required for proper dynamic CBMEM operation.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=urara ramstage does not crash anymore in CBMEM initialization
Change-Id: Id8e001be20fc245c91b2639f89775e594b0de966
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b7c6e4090d76a172c269bff002428015cc8aac8a
Original-Change-Id: I5d44907443724891c8cff805208a7a3bb8e36752
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232292
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9191
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
32K is a more appropriate room for Pistachio bootblock.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=there is no bootblock overflow even when compiled with -O0.
Change-Id: I454746ce0b9daabc93ccbf3316655fac836af8ff
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 56adf22ba12f5a7c69d11c0c720996de32ca9149
Original-Change-Id: I74b6674aea95b1138e2168527239e2cfb4a7ad42
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9190
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
C0_COUNT register is a free running counter clocked by the CPU
frequency divided by two. On the FPGA board it results in 25 MHz, on
real SOCs it will have to be figured out later.
Some magic addresses and numbers are used to find out if the code is
running on the FPGA board.
timestamp_get() and timer_monotonic_get() are kept in the same file.
The CPU initialization makes sure that CO COUNT is in fact enabled and
starts from zero.
BRANCH=none
BUG=chrome-os-partner:33595,chrome-os-partner:31438
TEST=with timer enabled, the startup code properly initializes UART
and prints the coreboot bootblock banner message on the serial
console.
Change-Id: I98fe330b961f677448b222917ab7d586494ed4b7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a7324221c1d856ac72fa2b0ab586b5ea8cab3a05
Original-Change-Id: I2d518213de939e91a35f8aea174aed76d297dd72
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227888
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9188
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is a no-op aesthetic change, arranging configurarion and makefile
lines alphanumerically.
BRANCH=none
BUG=none
TEST=cosmos still builds
Change-Id: I72b7defca722380dda3ef8453e625f28bdebfa2c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c55a7e9d5064edf5cac9498c8c6c377cbf705bb1
Original-Change-Id: I4498eef59fc20ea04b6ebadb451d0fe346824c05
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223597
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9353
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This adds board and soc files as a template for cosmos.
BUG=chrome-os-partner:32772
BRANCH=none
TEST=Built coreboot for cosmos and veyron_pinky.
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Change-Id: I6e17058afaa629c6aa70c2d195230dba782af526
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd9dbcf1023a79921c8501bbe09969d65ca9e742
Original-Change-Id: I676bdf460f5dd996dcce1fc422a69882798bc112
Original-Reviewed-on: https://chromium-review.googlesource.com/222050
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9351
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CQ-DEPEND=CL:221601, CL:*178568
BUG=chrome-os-partner:32684
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I50d0475dbe1390b640a726c259364f36abcbebe0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221579
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 14e348721399f13a52258faa16769b0ebb5b511f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2683cb29c7a93f3f4aba0d7b9a56a1ca209518a0
Reviewed-on: http://review.coreboot.org/9432
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CQ-DEPEND=CL:221598, CL:*178568
BUG=chrome-os-partner:32684
BRANCH=None
TEST=Compiles and boots to kernel prompt
Original-Change-Id: If7c725333b45a92f951ab674c3e4bd6a51c180c2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221577
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 9f5a6ae8cb6e7136ab0f0158a864dfc8ccf5c24f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If83dece2b4f2aa7d1457c723131efaa9b1169009
Reviewed-on: http://review.coreboot.org/9431
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=chrome-os-partner:32684
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt using vboot2
Original-Change-Id: Ibf7666d273e4d1af719c60d3f02bddcb4461f4bd
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221576
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 8335915940ae9ba9e51e360df6963a27b05d6324)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I7d3d5cda4c4be945931d9133ab18680dac1dcefe
Reviewed-on: http://review.coreboot.org/9430
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add GENERIC_UDELAY Kconfig option so that a generic
udelay() implementation is provided utilizing the
monotonic timer. That way each board/chipset doesn't
need to duplicate the same udelay(). Additionally,
assume that GENERIC_UDELAY implies init_timer()
is not required.
BUG=None
BRANCH=None
TEST=Built nyan, ryu, and rambi. May need help testing.
Change-Id: I7f511a2324b5aa5d1b2959f4519be85a6a7360e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a85fbcad778933d13eaef545135abe7e4de46ed
Original-Change-Id: Idd26de19eefc91ee3b0ceddfb1bc2152e19fd8ab
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219719
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9334
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:32973
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia4715fd7a852b82c66d436eb12988f8e3290b9b0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0d88dd324a8ee0ace51e9ad2343d81cc828a4f34
Original-Change-Id: I662163848a772018f1e8eb003aa3d3bc06e80e98
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223347
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9359
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch aligns tegra124 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Nyan, Nyan_Big and Nyan_Blaze.
Change-Id: Ia82ab86b2af903690cc6c9d310f7bdda3425ea7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d23774e071ec22781991ff20fbf63802f620c88
Original-Change-Id: Ia126cff8590117788d1872e50608c257d2659c1f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224504
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9326
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns ipq806x to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Storm.
Change-Id: Icb81a77e6f458625f5379a980e8760388dd3a1f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bf23774c9ffa5d08c211f3658d39adcfa47b339
Original-Change-Id: I283cc7e6094be977d67ed4146f376cebcea6774a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224502
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9368
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>
|
|
While upstreaming, some old (or downstream) names sneaked in.
Change-Id: I148fd8f46bc88c38ce1f62efe5771555bd5dcc5c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9350
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is the start of a series to change all non-x86 SoC-specific
headers to be included as <soc/header.h> instead of the old
<soc/vendor/chip/header.h> or "header.h". It will add an include/soc/
directory under every src/soc/vendor/chip/ and append the .../include/
part of that to the global include path.
This matches the usage of <arch/header.h> for architecture-specific
headers and had already been done for some headers on Tegra. It has the
advantage that a source file which does not know the specific SoC used
(e.g. Tegra files common for multiple chips, or a global include file)
can still include SoC-specific headers and access macros/types defined
there. It also makes the includes for mainboard files more readable, and
reduces the chance to pull in a wrong header when copying mainboard
sources to use a different-related SoC (e.g. using a Tegra124 mainboard
as template for a Tegra132 one).
For easier maintainability, every SoC family is modified individually.
This patch starts out by changing Rk3288. Also alphabetized headers in
affected files since we touch them anyway.
BUG=None
TEST=Whole series: compared binary images for Daisy, Nyan_Blaze,
Rush_Ryu, Storm, Urara and Veyron_Pinky. Confirmed that they are
byte-for-byte identical except for timestamps, hashes, and __LINE__
macro replacements. Compile-tested individual patches.
Change-Id: I4d74a0c56be278e591a9cf43f93e9900e41f4319
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4ad8b6d2e0280428aa9742f0f7b723c00857334a
Original-Change-Id: I415b8dbe735e572d4ae2cb1df62d66bcce386fff
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222025
Reviewed-on: http://review.coreboot.org/9349
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
check the cpu and gpu temperature in romstage,
if over 120 degrees celsius,shut down the device.
BUG=None
Test=Boot on veyron_pinky rev2, write value
3421(125 celsius) to grf_tsadc_testbitl register,
the device will be shut down
Change-Id: I275d643ce8560444a9b42ee566d5fd63ebcda35e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e0c597489dc0637ffa66ee9db0c4f60757f8889f
Original-Change-Id: If406d6a4f6201150f52ea7fc64cd50b45778d7aa
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223259
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9348
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Data RAM write latency: 2 cycles
Data RAM read latency: 2 cycles
Data RAM setup latency: 1 cycle
Tag RAM write latency: 1 cycle
Tag RAM read latency: 1 cycle
Tag RAM setup latency: 1 cycle
BUG=None
TEST=Boot Veyron Pinky
Change-Id: I1d710f65114be6a976aa3fe23b076e89c14ac8b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 421c2e5ba44f1693f8b3c869289fc93ab9ef5965
Original-Change-Id: Ic9c909b7913d434bd40016c6a820ddff7e991634
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223713
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
Original-Commit-Queue: Doug Anderson <dianders@chromium.org>
Reviewed-on: http://review.coreboot.org/9347
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As per NV SysEng, setting PINMUX_CLAMP_INPUTS=1 is now
considered a bad thing. It clamps _all_ tristated inputs
to zero, and isn't really the panacea for duplicated pinmux
mappings as was stated previously.
BUG=None
BRANCH=None
TEST=Built both Rush and Ryu OK. Tested on Rush, booted kernel
OK.
Change-Id: I7d6982a18a772efda7f1d3bf0dcb0d4d0a5bed8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c5f77fa31961d39dd7b4bd2902288ead9ad80100
Original-Change-Id: I566c4516b34686b744a47a2b0c18c4b801456727
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/224032
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9346
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Paging code is tricky and figuring out what is wrong with it can be a
pain. This patch tries to ease the burden by giving a little more
information for prefetch and data aborts, dumping the Instruction Fault
Address Register (IFAR), Instruction Fault Status Register (IFSR) and
Auxiliary Instruction Fault Status Register (AIFSR) or the respective
Data registers. These contain additional information about the cause of
the abort (internal/external, write or read, fault subtype, etc.) and
the faulting address.
BUG=None
TEST=I have read through enough imprecise asynchronous external abort
reports with this patch that I learned the bit pattern by heart.
Change-Id: If1850c4a6df29b1195714ed0bdf025e51220e8ab
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf3b4924121825a5ceef7e5c14b7b307d01f8e9c
Original-Change-Id: I56a0557d4257f40b5b30c559c84eaf9b9f729099
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223784
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9345
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:32973
BRANCH=None
TEST=cbmem -t and verified timestamps on ryu
Change-Id: Ia2d4d88c5230702319c5651641d8a1a3cc5128b5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a227beb4dd4de8c9e6188a62a3b92ba4eeded80c
Original-Change-Id: I4687c2ffe77dcc93d0853de32c8492c7b4d1dbb0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223346
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9344
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Remember the XN bit? The one we had so much fun with on Nyan (LPAE)
because not setting it allows random instruction prefetches to device
memory that hang the system every few thousand boots? Thankfully, we had
always been setting it in the non-LPAE MMU code already...
"When the XN bit is 1, a Permission fault is generated if the processor
attempts to execute an instruction fetched from the corresponding memory
region. However, when using the Short-descriptor translation table
format, the fault is generated only if the access is to memory in the
Client domain, see Domains[...]" - ARM A.R.M. section B3.7.2
Oops. This patch changes our Domain Access Control Register (DACR) to
set domain 0 (the only one we are using) to Client. This means that
access permissions (AP[2:0] bits) become enforced, but they are already
set to full access (0b011). It also means that non-LPAE systems will not
be allowed to execute from DCACHE_OFF memory with enabled MMU anymore.
As far as I can see, Veyron_Pinky has been the only board that does
that.
BUG=chrome-os-partner:32118
TEST=Booted Veyron_Pinky with MMU in the bootblock, saw hangs that look
like spurious prefetches and confirmed that this patch fixes them.
Change-Id: I81c00743f938924a5dc8825389fe512a069b77db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cbc96db296a41ae700371a8515a1179c142f58e7
Original-Change-Id: I30676a5bfe12d516e5f910f51ee6854f6e5be557
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9343
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns tegra132 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Rush_Ryu.
Change-Id: I5cdf4008a65db84f15c937ef53aab5e4d3ef24c4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5c5c63d7b6399d3eb8a211b15d47829fe93a591
Original-Change-Id: Ifafd4d42d4fb04a1c37e8a5f23877c2b550cf44c
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224505
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9369
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Solving the DACR bug will mean that XN bits suddenly become enforced on
non-LPAE systems, and we will no longer be able to execute out of a
region mapped DCACHE_OFF. When we enable the MMU in romstage we are
still executing out of SRAM, so we would instantly kill ourselves.
Solve this issue by enabling the MMU earlier (in the bootblock) and
mapping the SRAM regions as DCACHE_WRITETHROUGH. They should really be
DCACHE_WRITEBACK, but it looks like there might be hardware limitations
in the Cortex-A12 cache architecture that prevent us from doing so.
Write-through mappings are equivalent to normal non-cacheable on the A12
anyway, and by using this attribute we don't need to introduce a new
DCACHE_OFF_BUT_WITHOUT_XN_BIT type in our API. (Also, using normal
non-cacheable might still have a slight speed advantage over strongly
ordered since it should fetch whole cache lines at once if the processor
finds enough accesses it can combine.)
CQ-DEPEND=CL:223783
BUG=chrome-os-partner:32118
TEST=None (depends on follow-up CL)
Change-Id: I1e5127421f82177ca11af892b1539538b379625e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7b079f4b6a69449f3c7cc18ef0e1704f2006847
Original-Change-Id: I53e827d95acc2db909f1251de78d65e295eceaa7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223782
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9342
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds an mmu_config_range_kb() function, which can set memory
types at the 4KB level by chaining a fine-grained page table to an
existing superpage entry. It is only intended for special cases where
this level of precision is really necessary and therefore comes with a
few practical limitations (the area for each invocation must be confined
within a single superpage, and you are not allowed to remap the same
region with mmu_config_range() again later). Since the fine-grained page
tables need some space, boards intending to use this feature must define
a TTB_SUBTABLES() region in their memlayout.ld.
BUG=chrome-os-partner:32848
TEST=Booted both Veyron_Pinky (normal) and Nyan_Blaze (LPAE), ensured
that they still work. Checksummed the page tables with and without this
patch, confirmed that they end up equal. Hacked in some subtable test
entries, hexdumped all tables and manually confirmed that they look as
expected.
Change-Id: I8c3eb7c2eb9c82e2abc5f2c0dda91f5b2eee7023
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2f13e60cf5509b9a63fb7b8d84846daf889dc1b7
Original-Change-Id: Iedf7ca435ae337ead85115200d6987fb0d4828d7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223781
Reviewed-on: http://review.coreboot.org/9341
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:32973
BRANCH=None
TEST=cbmem -t to check proper timestamps on ryu
Change-Id: Ic31c5d9f3e397d90b08fe1c5e152148f4a278b95
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 92469e04c1c52bd60a8a37f017d865d0a838bff5
Original-Change-Id: I95419a6d240c168c8b6a489cac969390ecf6dea0
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223345
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9340
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch does some general cleanup in the Rockchip clock code, and
adds some more assertions regarding the PLL VCO and output frequency
ranges. It changes all PLL divisors to use the lowest values that can
still hit the target frequency, since higher NR values lead to higher
jitter and higher NO values increase power draw.
Also change DDR3 frequency code to hardcode the optimal divisors for
certail frequencies. As a little hack we will interpret 666000000 to
actually mean 666666666.6P (and analogous for 533MHz), since that's what
you usually want for memory.
BUG=chrome-os-partner:32139
TEST=Boot on veyron_pinky rev2, check that dpll_is shown as 666666666 in
/sys/kernel/debug/clk/clk_summary.
Change-Id: I57d7ef34500984184e010c0cc7d73789338834d4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7466ffc035b3f06ac280f412bc496059abf3239c
Original-Change-Id: I4f3c39641955a95c6dfbe9334035eb670b138bf0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221801
Reviewed-on: http://review.coreboot.org/9339
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change re-writes the spi_xfer() function to support full-duplex
transfers.
Even though the code looks much different, the same basic algorithm
for setting up the transfer is used. The main difference is that
reads from rxdr and writes to txdr occur simultaneously and accounting
is more complicated, so I separated the higher-level accounting
portion from the low-level FIFO handling portion to simplify things.
BUG=chrome-os-partner:31850
BRANCH=none
TEST=Loaded content from SPI ROM fine, needs testing w/ EC
Change-Id: Ic109a02daf52ba694b63a73fec1a72b3c5c0fd71
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6a14f5ff8ed04d62e8de6ad2f468b763ffb8213c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I33d2f5179360baf94627c86b57d12f032897caf5
Original-Reviewed-on: https://chromium-review.googlesource.com/218881
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9338
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
As cbmem_entry has been removed from ramstage loading there's no
need to keep the intermediate cbmem_entry around. The region
containing the rmodule program can just be used directly.
Change-Id: I06fe07f07130b1c7f9e374a00c6793d241364ba8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9328
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Over the course of time there have been some implicit assumptions
about cbmem being available for find() or add() operations. However,
the cbmem area was never fully recovered until entering the state
machine: BS_ON_ENTRY into BS_PRE_DEVICE. Correct this assumption
by explicitly calling cbmem_initialize() in the EARLY_CBMEM_INIT
case.
This, however, doesn't fix timestamp_init() showing an error about
not being able to allocate the timestamp table.
Change-Id: Ib93fcc932e202ebd37822f07a278ea9694fe965c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9327
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If you try to boot a VBOOT2_VERIFY_FIRMWARE with less than 4K CBFS cache
right now, your system will try and fail to validate the FMAP signature
at (u8 *)0xFFFFFFFF and go into recovery mode. This patch avoids the
memcmp() to potentially invalid memory, and also adds an error message
to cbfs_simple_buffer_map() to make it explicit that we ran out of CBFS
cache space.
BUG=None
TEST=Booted on Veyron_Pinky with reduced CBFS cache, saw the message.
Original-Change-Id: Ic5773b4e0b36dc621513f58fc9bd29c17afbf1b7
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222899
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0ed3c0c2b63be0d32e8162faf892e41cef1f1f23)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I20ccac83bff4a377caca6327d0e21032efff44c1
Reviewed-on: http://review.coreboot.org/9373
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
It's been a while since SBL blob size was reduced. As CBFS area by
definition includes the bootblock, storm configuration needs to be
updated to address the changes in layout.
Incidentally, it looks like CBFS_SIZE configuration setting is not
used on ARM platforms, this will have to be addressed separately.
BRANCH=storm
BUG=chromium:422501
TEST=storm firmware does not report the failure to find payload anymore
Original-Change-Id: I37abf76a9d8884b3431633f57f64896c3a5fb135
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222898
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b104d5c1c328b8bd9c6f926ed4fe3e4948860fbc)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I2800bf4ac6383c5ceb47330f07efaaf64e5d80d9
Reviewed-on: http://review.coreboot.org/9372
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I overlooked the macro name change from the Kconfig option.
'ARM' and 'V4' should not be separated by a '_'.
Change-Id: I8bf0d851e6fd5b5cfc0aa29af2246540c8cb1399
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9371
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In commit ec5e5e0d the rmodules linking flags were dropped.
This resulted in relocations being removed from the ELF file.
The relocation information is quite valuable when needing to
perform relocations at runtime.
Change-Id: I699477eb023fc6132e03699992dcf81a311d2d48
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9374
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Provide a weak implemenation of usb_setup_utmip function for those stages that
do not include usb.c.
BUG=chrome-os-partner:32684
BRANCH=None
TEST=Compiles successfully
Change-Id: Ia659b7f64e6c3e23053837337ccd267d4c179fba
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 49487e5af4471bff708d8939492af15fb5cb9e64
Original-Change-Id: Ib235cf039a17204ef7e06d545a3c86b75aff5b4c
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221575
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9325
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
C0 is a coprocessor register set defined in certain MIPS
architectures. This patch adds macros necessary to access the
registers and a couple of helper macros to access two particular
registers needed in the next patch.
The definitions come straight from arch/mips/include/asm/mipsregs.h in
the 3.14 kernel tree.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=the following patch demonstrates timer counter C0 register
configuration and use.
Change-Id: Ia5d52ffa75f2dd66d4cee3a4ed0af5122ccb2113
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb3d69eaf1561ca0b995720c24dafe2e6e22707d
Original-Change-Id: Ia4b1da40ecc1a03cf1cba0c648d42cd189fbcf93
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227887
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9336
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns pistachio to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Urara.
Change-Id: I0609b307695ba6a922384ac34dd604bffcb20692
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0a577918babf26adf10baa0f56a7065f5659d285
Original-Change-Id: I3ed405a3efdeec28965538d19a22f2b5b8204f01
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224503
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9335
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns exynos5420 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Peach_Pit.
Change-Id: If97b40101d3541a81bca302a9bd64b84a04ff24a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 570ca9ed6337d622781f37184b2cd7209de0083f
Original-Change-Id: I338559564e57bdc5202d34c7173ce0d075ad2afc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224501
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9324
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns exynos5250 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Daisy.
Change-Id: I39805c0346e117a0f9b2667763ecaa428f0f55a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: db6762f0c8425371d9860f908a5cefdeee8d1abc
Original-Change-Id: Ic358061ddcbbe7d83a95ca11247b8b505b20491d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224500
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9323
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
... so uint32_t is known by the time it's used.
Change-Id: I7281e869ce2e00165a0e21bc017aa6c0e27827b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9333
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This patch aligns broadwell to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Auron and Samus.
Change-Id: I0cb6aa3d17ce28890e586be1c2c7ad16d91dd925
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 23bcaa8110c4b63999c6ebf370045e9bef87ce6e
Original-Change-Id: I613ec0e2b970c75d1f8f7d9bb454bcf11abc78f0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224507
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9364
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This patch aligns baytrail to the new SoC header include scheme.
BUG=None
TEST=Tested with whole series. Compiled Rambi.
Change-Id: I0f0a894f6f33449756582eefa0b50bae545220db
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1216a86538517c03a7e5bca547d08ff3dbcaa083
Original-Change-Id: If5d2a609354b3d773aa3d482e682ab97422fd9d5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222026
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9363
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This stage is not tested on any hardware.
BUG=None
BRANCH=None
TEST=Compiles successfully for rush_ryu and veyron_pinky
Original-Change-Id: I6dd266471c815895bb3dd53d34aacc8fe825eeb6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221911
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 907ea2d1f8c9f01d815e8673695dd5271322c7a8)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I617a742d4a387be947086dae33e9a913f742a8d1
Reviewed-on: http://review.coreboot.org/9255
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With kconfig understanding wildcards, we don't need
Kconfig files that just include other Kconfig files
anymore.
Change-Id: I7584e675f78fcb4ff1fdb0731e340533c5bc040d
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9298
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Restructure get_option() calls to avoid unnecessary return value checks
by pre-assigning defaults to the options being retrieved.
Change-Id: I9159afe149a8eeed0785d1efd6eee8420b88b8f4
Signed-off-by: Varad Gautam <varadgautam@gmail.com>
Reviewed-on: http://review.coreboot.org/8631
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This patch adds the macros __ROMSTAGE__ and __RAMSTAGE__ which get
predefined in their respective stages by make, so that we have one
specific macro for every stage. It also renames __BOOT_BLOCK__ and
__VER_STAGE__ to __BOOTBLOCK__ and __VERSTAGE__ for consistency.
This change is intended to provide finer control and clearer
communication of intent after we added a new (optional) stage that falls
under __PRE_RAM__, and will hopefully provide some robustness for the
future (we don't want to end up always checking for romstage with #if
defined(__PRE_RAM__) && !defined(__BOOT_BLOCK__) &&
!defined(__VER_STAGE__) && !defined(__YET_ANOTHER_PRERAM_STAGE__)). The
__PRE_RAM__ macro stays as it is since many features do in fact need to
differentiate on whether RAM is available. (Some also depend on whether
RAM is available at the end of a stage, in which case #if
!defined(__PRE_RAM__) || defined(__ROMSTAGE__) should now be
authoritative.)
It's unfeasable to change all existing occurences of __PRE_RAM__ that
would be better described with __ROMSTAGE__, so this patch only
demonstratively changes a few obvious ones in core code.
BUG=None
TEST=None (tested together with dependent patch).
Change-Id: I6a06d0f42c27a2feeb778a4acd35dd14bb53f744
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a4ad042746c1d3a7a3bfda422d26e0d3b9f9ae42
Original-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219172
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9304
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This allows combining and simplifying linker scripts.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ie5c11bd8495a399561cefde2f3e8dd300f4feb98
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9303
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:32015
BRANCH=None
TEST=successfully suspend/resume on Rush/Ryu
Signed-off-by: Yen Lin <yelin@nvidia.com>
Change-Id: I279e42fd055805f0060951d272571bda66514ea6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a02452e431d9aa6245fb2421773d66fc416d0a6e
Original-Change-Id: I11cca0a8f5e7a36c1fff690c8070c74706348949
Original-Reviewed-on: https://chromium-review.googlesource.com/214580
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://review.coreboot.org/9102
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disable VC setting for HDA so hdmi audio choppy issue will be eliminated.
Change HDA initialize steps to sync with UEFI reference code.
BUG=chrome-os-partner:25651
BRANCH=Baytrail
TEST=Does not have choppy noise during video playing
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Change-Id: I45d49123d369b7d075776215e709af5801ea696d
Original-Reviewed-on: https://chromium-review.googlesource.com/186024
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Benson Leung <bleung@chromium.org>
Original-Tested-by: Benson Leung <bleung@chromium.org>
Original-Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
(cherry picked from commit 9f725a40f77cd684b2e230bd226d78d87b56e73b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I4fc10a161e5996e14d4823491fb62a7beff39bcc
Reviewed-on: http://review.coreboot.org/9297
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On the SMM APM_CNT_FINALIZE step reinitialize the SPI
controller so that it can still log events after the SPI
controller has been locked down.
BUG=chrome-os-partner:24624
BRANCH=baytrail
TEST=Built and booted. Events still logged after SPI controller
has been locked down.
Original-Change-Id: I41a3e12c0398303e74f95eb6df82d5bc4303898b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/185630
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
(cherry picked from commit 28ffb1a9e761cdfeb173bd533684db1011260e0a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia82753cba9ae4f049de2e81061739efc21d49a1e
Reviewed-on: http://review.coreboot.org/9296
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix up commit b3847e64 (program loading: add prog_run() function),
which misses the braces for the if statement, causing the function
also to return if a non-payload program should be run causing the rest
of the stages never to be run.
Change-Id: I04940b218ba71e82af769c8db574528f830d0cbb
Found-by: Coverity, CID 1293136: Control flow issues (NESTING_INDENT_MISMATCH)
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/9306
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
acpi generators run only in RAM stage.
Change-Id: Ia2ab677848fef38976c85dda1c2773ae065856b0
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/9249
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
x201 has 2 sata ports. 1 port for hard drive and 1 port for the dock.
Tested on x201 with hdd in port 1 + cdrom in port 2.
Change-Id: I1ee8c547392257d4f2e00a5d48e21447a84f79c0
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8657
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
The nehalem smi finalize handler was just copied from sandybridge,
without even changing the function name.
TEST=Built and tested on x201t with additional patch to use finalizers
Change-Id: Ifb44eeaaa6e03556deeb5d12ed1147e02d6d6eb9
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8292
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
Drop the inner underscore for consistency. Follows the
commit stated below.
Change-Id: I75cde6e2cd55d2c0fbb5a2d125c359d91e14cf6d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-on-Change-Id: I6a1f25f7077328a8b5201a79b18fc4c2e22d0b06
Based-on-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-on-Reviewed-on: https://chromium-review.googlesource.com/219172
Reviewed-on: http://review.coreboot.org/9290
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Instead of keeping this separate variable around, add linker scripts
to the $(class)-y source lists and let the build system sort things out.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I4af687becf2971e009cb077debc902d2f0722cfb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9289
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
So far we assumed that all files in *-srcs are below src/
which wasn't really true actually and will be less true with
future changes.
Fix up crt0.S handling on x86, which is covered by default rules
due to this change.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Icae563c2d545b1aea809406e73faf3b417796a1b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9288
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
before the rkclk_init(), we must set rk808
buck1 voltage up to 1300mv
BUG=chrome-os-partner:32716, chrome-os-partner:31896
TEST=Boot on veyron_pinky rev2,check the rk808 buck1 voltage 1300mv
and check the cpu frequency up to 1.8GHz
Original-Change-Id: I6a8c6e35bd7cc6017f2def72876a9170977f206e
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222957
Original-Reviewed-by: Doug Anderson <dianders@chromium.org>
(cherry picked from commit 2e7e7c265691250d4a1b3ff94fe70b0a05f23e16)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iff89d959456dd4d36f4293435caf7b4f7bdaf6fd
Reviewed-on: http://review.coreboot.org/9260
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
change i2c clock low period and high period proportion to 7:3
guarantee the low period more than 1.3us
BUG=None
TEST=Boot on veyron_pinky rev2,check the i2c clock frequency
Original-Change-Id: I235e9e3ff54ab3b9cabad36bab58a8409f7005a0
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/223002
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 57a5d90d394086483e0dcdd6279678658d07d842)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I6b0c9dfa540354f6463ed90c9f3f9503a4d5749e
Reviewed-on: http://review.coreboot.org/9259
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Verified by reading back the value of SMMU_CONFIG register that enable bit
is set to 1
Original-Change-Id: Iccc870141f9b9729971bf12119f9f3dae8181a43
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222770
Original-Reviewed-by: Olof Johansson <olofj@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit a06b36f9003d801709d83a8faed6fc04bb91df1b)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iae3949940a5a0efa2761542974d5c209178ce397
Reviewed-on: http://review.coreboot.org/9258
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In able to do earlyprintk spew on LP0 resume, the kernel needs to
know the board UART. ODMDATA (in bct/odmdata.cfg) contains this info,
and the kernel looks for it in PMC_SCRATCH20. Fetch the ODMDATA word
from the BCT copy stored in IRAM by the BootROM.
BUG=chrome-os-partner:32015
BRANCH=none
TEST=Built for Rush and Ryu OK. Dumped PMC_SCRATCH20 in TegraShell
on Rush and confirmed value is what's in odmdata.cfg.
Original-Change-Id: I63f33558ee8b00bd6c1e313efcd531e1d5fc67eb
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/222402
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 3f6a21afdb81f7d2ae90119c563535b4c87c9ade)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9819ffdf0f7618f0dd8dc50f81b5b26d6f94bfbd
Reviewed-on: http://review.coreboot.org/9257
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There's no need to reserve the framebuffer within coreboot. If the
payloads need a framebuffer they can allocate one themselves.
BUG=chrome-os-partner:31355
BRANCH=None
TEST=Built and booted on ryu.
Original-Change-Id: I8d8b159e7fdd877e392193c5474a7518e9b3ad21
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221726
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 1ff8da9fed414fceeda3f94b296312f4531b320f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I4e7c0417824f2be9836b1bc2bb99322c78490ca2
Reviewed-on: http://review.coreboot.org/9256
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the previously added frequency constants in patch
titled 'stddef: Add KHz, MHz and GHz constants'.
BUG=None
TEST=Compiled Veyron_Pinky.
Original-Change-Id: I4a1927fd423eb96d3f76f7e44b451192038b02e0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221800
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 41bb8026818b4381d4a6d43d2d433c207c3971bc)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I37a610d57f1a3d44796bf80de5104c2b5b3f3dac
Reviewed-on: http://review.coreboot.org/9254
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds some simple constants to more easily write and do math
with frequencies, analogous to the existing KiB, MiB and GiB constants
for sizes.
BUG=None
TEST=Compiled Veyron_Pinky.
Original-Change-Id: I4a1927fd423eb96d3f76f7e44b451192038b02e0
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221800
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 41bb8026818b4381d4a6d43d2d433c207c3971bc)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I1e708b0aa53533c9ab999793ca2273c6dc68b5f6
Reviewed-on: http://review.coreboot.org/9253
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This device is not used in current builds and should be
disabled to help EMI.
BUG=chrome-os-partner:34117
BRANCH=samus
TEST=build and boot on samus
Change-Id: I5c34f1f6c84d9de04a42e16fa32f57d4f9d1e478
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 00a9b2ad8512f84beff7358dad0ec028478c57d2
Original-Change-Id: I62541e343dcaa3cd31c81b73d8c27a5efcf3ad60
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234403
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9282
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When turning up the CPU frequency set it to turbo if that is
a possibility. Also only set the frequency on the boot CPU
since that is all we need it on, this will allow the 1-core
turbo ratio.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I573eb7a507305814ec48cc2f624b8e6ddad43f84
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d408c1b462983c682d61c6c447692391c2b52183
Original-Change-Id: Ib5ad746767ee0a56bc7e59de679a9342f053c0e5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/234401
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9281
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The romstage_main routine takes three parameters: bist, tsc_low and
tsc_hi. However in cache_as_ram.inc only the bist value is being
passed. This patch adds the two halves of the TSC value.
BRANCH=none
BUG=None
TEST=Build and run on Samus
Change-Id: I3d216edd0be65f29b51a66ed67b2d17910a594d4
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: de565f28dce8a549d74defbcf5eaf8116bb1b831
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Change-Id: I34fb21e493dcb3a44426ba7964cd72a319a4254e
Original-Reviewed-on: https://chromium-review.googlesource.com/231173
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9280
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Extend lib/reg_script.c to use a platform table to declare
additional platform specific register access routine functions.
REG_SCRIPT_TYPE_PLATFORM_BASE is the starting value for platform
specific register types. Additional register access types may be
defined above this value. The type and access routines are placed
into reg_script_type_table.
The Baytrail type value for IOSF was left the enumeration since it
was already defined and is being used for Braswell.
BRANCH=none
BUG=None
TEST=Use the following steps to test:
1. Build for a Baytrail platform
2. Build for the Samus platform
3. Add a platform_bus_table routine to a platform which returns the
address of an array of reg_script_bus_entry structures and the
number of entries in the array.
Change-Id: Ic99d345c4b067c52b4e9c47e59ed4472a05bc1a5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 2d9fecf4287dff6311a81d818603212248f1a248
Original-Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/215645
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Change-Id: I7cd37abc5a08cadb3166d4048f65b919b86ab5db
Original-Reviewed-on: https://chromium-review.googlesource.com/229612
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9279
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a new memory type for the next build, and rename the existing
ones to drop the Gb suffix.
BUG=chrome-os-partner:33924
BRANCH=samus
TEST=build and boot on samus
Change-Id: Iedcd3823aa80c93fc2aadbc486d74b40c9bd4279
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bcc9827965182a7d0d5325189d55eb76f5c2f0e7
Original-Change-Id: I47d2b7e58f51f3ee00cd7797da3f8353f509f8b5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230769
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9278
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Currently the rt5677 codec outputs 6MHz PDM clock which is
out-of-spec for the speaker amp SSM2537. The amp's GAIN_FS
pin is pulled down to PGND with a 47k resistor, so the
expected PDM clock is 64*FS (~3MHz) according to its datasheet.
The corresponding kernel patch that adds the PDM clock config
option is https://chromium-review.googlesource.com/#/c/230303/
BUG=chrome-os-partner:33303
BRANCH=samus
TEST=flash coreboot with this patch and see PDM CLK went
from 6MHz to 3MHz on samus with a scope.
Change-Id: Icf2c61930175bede1ee8ebc2b0fb17c2938b806c
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b9ba4597515b2fbcc72fa22e296357c454175648
Original-Change-Id: I09acdf47bab4f641981491a84197de234918435e
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230344
Original-Reviewed-by: Dylan Reid <dgreid@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9277
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This was copied and pasted more than it should have been...
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I5008f2992d8ab3b952042415af6d7844788e14fc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bff4570dffa413c4fc4dfd8c49920f6b951e944a
Original-Change-Id: I2af9a30f3df733af147e8759f78a9802d2296c0f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230753
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9276
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These are board specific adjustments that can be made for each
USB3 port.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: Iaa3ce09419dfd64e3e8187f6dc073a8c68565337
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 21000496bb4560c9d1452a128335bbf24ca1b0aa
Original-Change-Id: Iab92ff7b0218d4abd9eba8a94d34ddd9a30ddb87
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230231
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9275
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This value apparently changed to 0x27 in the hardware but was
never adjusted in firmware.
BUG=chrome-os-partner:33790
BRANCH=samus
TEST=build and boot on samus
Change-Id: Ib610fc6522715e3c841c337d420ec63563bec798
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e01d3b47bf49861e9d53fc8db41890fe4c91ff9b
Original-Change-Id: I10ca7b77068491e143f8bf2463b481eada910618
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/230232
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9274
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This will be connected to the coded for firmware upload.
BUG=chrome-os-partner:33495
BRANCH=samus
TEST=build and boot on samus, check that GSPI driver is loaded
Change-Id: Ife41394e31af9dab03495b34609cb119525f9b19
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bbf26154da675845251c54f71d1df9df8d2a4fd5
Original-Change-Id: I25c91145aef8ca2aef229ffb27e8a45df659982e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228835
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9273
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BRANCH=master
BUG=chrome-os-partner:33113
TEST=Build a image and test on Rambi.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I37add87e6fd3e7ad4eee09b8e0b312a2a89c7948
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 59b4c94be46b4397de7cb32726da9fa216e75a4c
Original-Change-Id: I22c8f9730cc0e1ecc991f2dd7f2a1e7c548a1789
Original-Reviewed-on: https://chromium-review.googlesource.com/226654
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9272
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
With EVT2 systems GPIO9 is now used for touchpad wake.
BUG=chrome-os-partner:32232
BRANCH=samus
TEST=suspend/resume by touchpad on samus, with kernel workaround
to disable setting of T19 in atmel driver mxt_suspend()
51 | 2014-11-03 12:41:34 | ACPI Enter | S3
52 | 2014-11-03 12:41:37 | ACPI Wake | S3
53 | 2014-11-03 12:41:37 | Wake Source | GPIO | 9
Change-Id: I67c1a6591dc287fc780889950e78c731a5a65d44
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8512a6e5266edaf77d300f47bd26c501f00361d7
Original-Change-Id: I8120747986e694b64d464826f87c9afa68af157a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/227157
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9271
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Broadwell Tj_max is 105C, update accordingly.
BUG=chrome-os-partner:28234
BRANCH=samus
TEST=build and boot on samus
Change-Id: I001e17287ebbcbfdd909428e149a95878734dab9
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fb1de7a9e1d84f592b785a1b495e4aaf434f23a2
Original-Change-Id: If6a3fd682f4ee9b8010982870a61b76e33010fd4
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226952
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9270
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=Audio playback to headphone works
Change-Id: I35efa3b97abbba50cbee4c25acfaeb155fc1238f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: e2c0ede19c6b700c8d0bf01ff9d3a54984c5d784
Original-Change-Id: Ib51aace52026688dc8972047e5d934c80138ff80
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221294
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9269
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The codec interrupt needs to be active high because multiple
interrupt sources share this line:
1) Headphone plug detect
2) Mic present
3) Hotword detect
These interrupt sources are OR-ed together.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=Jack detection works on samus
Change-Id: If35fe8493ab30d878d9fac2251acee62c776b0eb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 348608fe61f7848db2bfd22502a0c259d24f8980
Original-Change-Id: Ief0a291d9455f2d03789198153781ff8133aa1ce
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220588
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9268
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 31d7276fbdca67937bcdf0d5c2af371a2fd1a510
Original-BUG=chrome-os-partner:31424,chromeos-os-partner:32380
Original-TEST=Build a BIOS image and check the value is applied correctly.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I0adda3643776b259a635a021babd983090f1df43
Original-Reviewed-on: https://chromium-review.googlesource.com/220475
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Id88c11ed128b44c3a60ef1a141b99071c1ee15d3
Reviewed-on: http://review.coreboot.org/9267
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
GPIO IRQ support has been added in upstream rt5677 driver,
with new jack detect platform config options.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=headphone and mic detect works on Samus
Change-Id: I68a675ccd1fec3e5329d57aadad3229053092026
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4b90fa2f557f603661e25c9e1b4712eea15c8502
Original-Change-Id: I379087b8acdb13e65776a18c9ee3a58d4cb4e73c
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224513
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9266
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This matches the label exported by the GPIO controller in the
kernel and allows more speicific matches if there are other
devices that also export GPIOs.
BUG=chrome-os-partner:33098
BRANCH=samus
TEST=crossystem wpsw_cur returns 1
Change-Id: I96f8d0f7f9fd584be4a6f14d13e04db0a88951a8
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 736679136a0a72874304eaeae1ac58633cd2ce14
Original-Change-Id: I655549d0f0eca341581bfbf845162d8b9f5e993d
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224136
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9265
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Since the PD software sync is slow enable support for displaying
a screen telling the user that something is happening.
BUG=chrome-os-partner:32379
BRANCH=samus
TEST=manual testing:
1) in normal mode, with EC/PD in RW, ensure that they are rebooted
to RO and the VGA Option ROM is loaded and the wait screen is
displayed, and then the system is rebooted at the end and the
VGA Option ROM is not loaded.
2) same as #1 with EC/PD in RO already, same result
3) same as #1 with system in developer mode, same result except
there is no reboot at the end of software sync
4) same as #1 with system in developer mode and EC/PD in RO,
ensure that there is no extra reboot at the beginning or end of
software sync.
Change-Id: Ib6c4cc03952768ece76832efc84f665c52191ffb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6971d74ff50ced0ef94d5fec26c0e6a071d207b2
Original-Change-Id: I125744f58c6b84df1af3943d9be98fe55c7117d5
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223850
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9264
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of having this in mosys just have coreboot report the
board version in SMBIOS tables.
BUG=chrome-os-partner:32359
BRANCH=samus
TEST=build and boot on samus, check /sys/class/dmi/id/product_version
Change-Id: I09d235752f4c870f99fb8c6a280e2bf9aba7e137
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 08413589ba84b07ff64c9116ca5fcc991cee3b89
Original-Change-Id: Ib851d2e79ed721dcbc1c2f2eda6da50cac064cf3
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223096
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9263
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This function needs to be available in different LOGLEVELs.
BUG=chrome-os-partner:28234
BRANCH=samus
TEST=USE=quiet-cb emerge-samus coreboot
Change-Id: Ib56995db64a7417a637eb8a93350fc40e6f83340
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 716d26c82a7df1dccf8956f301ab0e103fcedcff
Original-Change-Id: Ia8f0d05af24c9070c8c9241a3a7e137f845d1cab
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221540
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9262
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This is the specific codec setup platform data for samus.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=emerge-samus coreboot
Change-Id: I00d4a2f73810f5f7bad49922321fb1c340289770
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 813c45bc3fdd7a2fb84df0e24bd470003bf4eafa
Original-Change-Id: I5e2a8fad58bb8a3d02ccece0b1f6fe52f56c94ea
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/221539
Original-Reviewed-by: Ben Zhang <benzh@chromium.org>
Reviewed-on: http://review.coreboot.org/9261
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Snow was renamed to daisy a long time ago. The only reason, it seems,
the directory was still there, was a stray board_info.txt file that
probably went in shortly after the rename.
Change-Id: Iba08665e8486fcfeb214fcd05206a5f5683aea82
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9302
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Secmon needs a special build rule because of the objcopy -B
operation required to include it in ramstage. Utilize the
manual template so builds continue to work with upcoming
build chnages.
Note: secmon is actually missing symbols still so those
still need to be addressed. That looks to be as if
--gc-sections isn't be honored, but I'm actually thinking
the symbols are just erroneously carried over as the
references for these symbols don't show up in the
symbol table:
U coreboot_build
U coreboot_extra_version
U coreboot_version
U default_baudrate
U lb_add_console
U lb_add_serial
U uart_baudrate_divisor
Change-Id: I41c75e93536b73c4304ef3a87dc39d448d1f00d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9300
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I7735a2148da5330f220bd9a87b09e9fe3e37ffd1
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221322
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 5e43dfe1aab813f45f1123b0e2432cdab5738d87)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If3d89ab79bae6d8f1b6f2d89b7693a79dca02476
Reviewed-on: http://review.coreboot.org/9252
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add files to verstage class depending upon value of
CONFIG_ARCH_VERSTAGE_ARM_V7.
BUG=None
BRANCH=None
TEST=Compiles successfully
Original-Change-Id: I60fb8390abd9d378e38511d4f4ac323b43450232
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/221321
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 4889cb73b0579155c083bb5fa2895b4d52ab0a56)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Iea788ed72344343b2e7a3d91cd7f27ce20f4f177
Reviewed-on: http://review.coreboot.org/9251
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
A higher drive setting is used for fast link training, once the
link training succeeds, a known-good drive setting will be used
for the main stream transactions.
For full link training sequence, the sink devices may ask for a
preferred drive setting, thus this drive setting should be used
for the main stream transactions too.
BUG=chrome-os-partner:32129
TEST=all panels on blaze/big devices work fine.
Original-Change-Id: Icc540650dc1329af07fd9ee4661eb7fad435fde4
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219544
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 13d6accfdbe678e785851057f0800a3bbef11bea)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: If2fe7d5621f15aa3134d2a3920220e149bb64be6
Reviewed-on: http://review.coreboot.org/9248
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The original dp driver supports only fast link training and a
special drive setting is used for the link training sequence.
This might not be accepted by all panels. The better way is to
go through full link training sequence to negotiate for a best
drive setting.
With the change, dp driver will try fast link training first,
this is same as before. If it fails in fast link training, will
try full link training.
BUG=chrome-os-partner:32129
TEST=all panels on blaze/big devices work fine.
Original-Change-Id: I6f3402c4c5993a156c965c7f52b011d336a2946f
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219543
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 24966517d41252384af3c2784def36aebad42434)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I3e7e7e749e5c8a9f07ac6132859fcad6fc96c39c
Reviewed-on: http://review.coreboot.org/9247
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
rockchip_spi_slave has a fifo_size member which doesn't change.
This just replaces the struct member with a #define.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9ea5cdad49ee10c5f32304d0909c4a7e74a261f9
Original-Reviewed-on: https://chromium-review.googlesource.com/220471
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit f76cce3b38ac37f4df8abf6eebb8f7c7b29da095)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I3ab4eecfcce98aff3f6c9bd8f6c4e589784c60be
Reviewed-on: http://review.coreboot.org/9246
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This re-factors rockchip_spi to remove speed_hz which will instead be
passed in via rockchip_spi_init(), thus making it easier to support
other boards which may have different slave devices attached.
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I7baf0fa0a2660e3c975847fdec3eb92bcd0d6c10
Original-Reviewed-on: https://chromium-review.googlesource.com/220411
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit de33d2ed6352fc4c8e81dc53451f164a8792daf2)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ie6473e47d50b7e633688185e8d8036980b833f1c
Reviewed-on: http://review.coreboot.org/9245
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
It's used for files with custom build rules, eg.
the objcopy stuff surrounding smm and sipi_vector.
Change-Id: Ie9ab4c9c6008ca42f82f768c5f33f90c7f5f4db5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9287
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ldscript_ prefix is redundant.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I0f005c0c2abe2fdd6911a2c579cb7ec49ae5c0b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9284
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The tegra132 SoC is currently booting up on the AVP cpu which
bootstraps the rest of the SoC. Upon exiting romstage it
runs ramstage from its faster armv8 core. Instead of hard
coding the stage loading operations use run_ramstage().
Change-Id: Ib9b3eecf376ae022f910295920a085bde6e17f9f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8848
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The tegra124 SoC is currently booting up on the AVP cpu which
bootstraps the rest of the SoC. Upon exiting bootblock it
runs romstage from its faster armv7 core. Instead of hard
coding the stage loading operations use run_romstage().
Change-Id: Idddcfd5443f08d4dd41e1d9b71650ff6d4b14bc4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8847
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
