| Age | Commit message (Collapse) | Author |
|---|
|
Disable PMEs and clear global PME status to avoid undesired wakeups
or hangs in later stages. These bits are set by OS via ACPI can survive
S5 state so it is necessary to set them back to defaults after an
ungraceful shutdown.
TEST=Dell OptiPlex 9010 does not hang anymore after ungraceful shutdown
when configuring GPE0_EN register in southbridge LPC init
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I790cac3ce1101565b64ed54d9c6b50f5e9aa4cf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59524
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IA32_FEATURE_CONTROL does not need to be checked by BIOS, in fact these
bits are needed only by SENTER and SINIT ACM. ACM ENTERACCS does not
check these bits according to Intel SDM. Also noticed that the lock bit
of IA32_FEATURE_CONTROL cannot be cleared by issuing neither global
reset nor full reset on Sandybridge/Ivybridge platforms which results
in a reset loop. However, check the IA32_FEATURE_CONTROL SENTER bits in
ramstage where the register is properly set on all cores already.
TEST=Run ACM SCLEAN on Dell OptiPlex 9010 with i7-3770/Q77
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie9103041498f557b85019a56e1252090a4fcd0c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
There is no real code or feature dependency on
CPU_INTEL_FIRMWARE_INTERFACE_TABLE for Intel TXT.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I2858c8de9396449a0ee30837a98fab05570a6259
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Although TXT specification says to do power cycle reset if TXT_RESET
is set, all Intel provided implementations issue a global reset here.
TEST=Perform ungraceful shutdown after SENTER to trigger SCLEAN path
on Dell OptiPlex 9010 and successfully call ACM SCLEAN.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I8ee2400fab20857ff89b14bb7b662a938b775304
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Allow to set global reset bits on other platforms which enable
SOUTHBRIDGE_INTEL_COMMON_ME. In certain Intel TXT flows global reset
instead of full power cycle reset is needed.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I561458044860ee5a26f7d61bcff1c407fa1533f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Currently there is only a function that dumps GETSEC CAPABILITIES.
Add dumping GETSEC PARAMETER for completeness and additional debug
information.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3b2c8337a8d86000a5b43788840d15146b662598
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59516
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Region device is no longer used to locate BIOS ACM. Use new CBFS API
to map and unmap the file. Using rdev_munmap on the uninitialized
region device variable causes the platform to jump to a random address.
TEST=Dell OptiPlex 9010 does not raise #UD exception when Intel TXT is
enabled, ACM SCHECK is successful
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I98afba35403d5d2cd9eeb7df6d1ca0171894e9d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Implement the chipset production fuse state reporting as described in
the Intel TXT Software Development Guide. Also fix all occurrences
where the production fuse state is checked.
TEST=Dell OptiPlex 9010 with i7-3770/Q77 reports the chipset is
production fused
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic86c5a9e1d162630a1cf61435d1014edabf104b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59514
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Following coreboot's convention, return negative error codes from
platform_i2c_transfer().
BUG=none
TEST=emerge-asurada coreboot
BRANCH=none
Change-Id: I955b9aae11e20d75fac414d15714330e364dad2f
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
TXT BIOS Data region version is checked by Trusted Boot code. Older
versions of TBoot (e.g. 1.8.2) may refuse to set up the MLE if BDR
version is not known. Provide an option to set the BDR version in
case an older TBoot code is used. This is very useful for platforms
with TPM 1.2.
TEST=Set BDR version to 4 and successfully boot QubesOS 4.0 with
TBoot 1.8.2 on Dell OptiPlex 9010
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic2550bd4008559bd47de9e35f8b1c7b52e6e0f5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Include DPR in the memory map calculations if enabled. DPR is required
for Intel TXT support.
TEST=Boot Debian 10 and see the DPR memory being reserved in E820 and
cbmem logs:
"BIOS-e820: [mem 0x000000007fc09000-0x00000000829fffff] reserved"
"TSEG base 0x80000000 size 8M"
"DPR base 0x7fd00000 size 3M"
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ia22e49ba58709acfa0afe0921aa71d83cc06c129
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We need to report error while rtc_xosc_write() returns false.
TEST=error logs for RTC disappear
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I5fdf4de0383ef373dd45e8d8741aa861c9c4bdc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59653
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
There is no support for SD card on Corsola reference board, so
we add a configuration to disable SD card initialization to
prevent setting GPIOs in a mistaken way.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia05fd046335c6ce6f9198ddbb7cbda2afc6ae3cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On Chromebooks the RAM code is implemented by the resistor straps
that we can read and decode from ADC. For Corsola the RAM code can be
read from ADC channel 2 and 3.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I485c32dec7b425b604b4063d742a0e37d3961513
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Raise little CPU to 2GHz at romstage.
TEST=check little core cpu frequency is 2GHz
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: If4c983d15beb2b588230f3db7416cb767b29978d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add VPROC12/VSRAM_PROC12 to adjust power for raising little
CPU frequency.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I59b4627220022a51a116716036a8ba0048039508
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The types of pwrap_read_field()'s return value and pwrap_write_field()'s
`val` argument are u16, so correct the usage in MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie05ab65ecd9b8ea1379ef74393285c4f5d2db8a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
To raise little CPU frequency, add support for VPROC12 and VSRAM_PROC12 of MT6366.
TEST=build pass
BUG=b:202871018
Signed-off-by: James Lo <james.lo@mediatek.corp-partner.google.com>
Change-Id: I718fdf36d34969a6e21ddc8c1ec6f525e0e20904
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59566
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Configure Chromebook specific GPIOs, including EC_AP_INT,
EC_IN_RW, GSC_AP_INT, EN_SPK, GPIO_AP, and GPIO_RESET.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I76bde75788889111c0a051eed731dadc9898c0e1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some boards with the chrome EC will need to support more than 4
temperature sensors, so modify the number of TSRs supported when
generating the ACPI code. Note that the EC memory map already has
support for up to 16 TSRs, so no change is required on the EC
side.
BUG=b:207585491
TEST=with previous patch and some test data in brya0 overridetree.cb,
dump the SSDT and verify that all of the existing Methods for TSR0-TSR3
are also added for TSR4, as well as all Notify, etc.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Id002230bc872b0f818b0bf2b87987298189c973d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59633
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards may use more than 4 temperature sensors for DPTF thermal
control, so this patch adds support for one more temperature sensor.
BUG=b:207585491
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ibf9666bade23b9bb4f740c6c4df6ecf5227cfb45
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Kano EVT will exchange i2c port for touchscreen and cr50.
BUG=b:195853169
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I500f0721689ca66b65b8fb1deb79bef2bd988465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Reveal watchdog status value on bootblock stage.
BUG=b:207646327
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I2c5ad222a41085616565dd5c10b0e967bb64ec63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59641
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
In different sku, some unused GPIO pins are processed by NC for power
consumption.
BUG=b:196790249
TEST=emerge-brya coreboot chromeos-bootimage and check power
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I753e41dec1825299e6cd437b5f67e2d957bc6148
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59563
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enabling crashlog helps partners to debug hang issues efficiently.
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in
depthcharge. Warm/cold/suspend_stress test pass 50 cycles on gimble
Change-Id: Ib4bbe5d7cece0c6c5fc170460d55ac820054abb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
At present the default ROM for for QEMU is too small for U-Boot to fit.
Add a condition to catch this and expand it to a 1MB ROM. This allows
booting U-Boot under emulation.
It also matches the size used by other emulation boards.
Signed-off-by: Simon Glass <sjg@chromium.org>
Change-Id: Ia1a8c1109e3ece5fec56255173a2d19d4a130bcb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59604
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added fw config probe for MX98360A.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I2452b752ce58a5d0f1008cf187fb79ace6c4285f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Map existing PCI_DEVICE_ID_INTEL_ADL_P_ID_1 to ADLP 4+4+2 45W SKU power
related settings.
Per doc#626774 ADL_MOW_WW46_2021, update PD optimization relaxation for
ADL-P 482(28W) and 442(45W).
BUG=b:193864533
TEST=Build and check fsp log to confirm the settings are set properly.
Signed-off-by: Curtis Chen <curtis.chen@intel.com>
Change-Id: Ieba738a8ad3da5ae0a115feaa275b997a219d731
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Adding the DP_ prefix to the defines for MMIO_NP, MMIO_WE and MMIO_RE
clarifies the scope of those definitions. For consistency also add this
prefix to MMIO_DST_FABRIC_ID_SHIFT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a509ccc071aa51a67552fb9e7195358a76fe4dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
On Picasso the MMIO_NP bit in the D18F0_MMIO_CTRL0 data fabric register
is bit 12, but that has changed to bit 16 in Cezanne.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I64c06b84e2c0737b259077e7932f418306638e19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The bit is called REF_CLK_OK_STATE and not RST_CLK_OK_STATE, so change
the name of the define to FCH_AOAC_REF_CLK_OK_STATE.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iae26db94d83ebb2cb799f6d3e0bec37c8e849219
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
There were only definitions for removing low, high or both glitches, but
not to not remove glitches, so add this too for completeness.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I650f7754546935539339c02bb6a94bb3f855d4ce
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
I found the name of the DEB_GLITCH_NONE definition a bit misleading, so
change it to DEB_GLITCH_REMOVE which should clarify what this will do.
The description for this value in the PPR/BKDG is "Remove glitch". This
also puts the define in line with GPIO_DEB_REMOVE_GLITCH which is the
only place where DEB_GLITCH_NONE/DEB_GLITCH_REMOVE is used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59648710e0ff28c2026e1b2cc7e433cafb2f2807
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibf7482d20c6d27b2314ec8a31c349eb90c8a8feb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The DPTF parameters were verified by the thermal team.
BUG=b:207463762
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I634d6d98c28e75ad41488921df6b8e836e253ff1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Some IDs don't have an associated name. Add them.
Change-Id: I1033dd0cecff417b65001f25f6cc4101b603bd9b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59617
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename `CMBMEM_ID_ACPI_HEST` to `CBMEM_ID_ACPI_HEST`.
Change-Id: I3e680244c9573f566b51298462c324e062ab4657
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59616
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5b47324af368f81288e9e9be65fe0f1ae2fa3697
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Those methods were only in the non-common Stoneyridge GPIO ACPI code
that got dropped, so drop those unused methods too.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I519d88ffa1d5d4823cce4876ecf59b9019f676e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idf00879701b223ecaca74aef2a51a1b86d2c6ce3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Stoneyridge uses the same GPIO bank peripheral as Picasso and Cezanne so
we can use the common AMD SoC GPIO ACPI code.
TEST=none
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa1fc923cd5b779765917b171b5a7222f18a176a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
De-duplicate the definitions for the pin status bit and use this new
definition in both the C and the ACPI code.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8b0fe7dbec5dac176cdfa9690862433f202fb552
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The GPIO_WAKE_* definitions are the ones that are used in the code, so
drop the unused GPIO_*_WAKE_EN definitions for the same bits. Also move
the GPIO_WAKE_* definitions to the place the GPIO_*_WAKE_EN ones were
before this patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I622673cc72107908b525a65212061062f32e13dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
All bits covered by the bit masks GPIO_INT_ENABLE_MASK, GPIO_PULL_MASK,
GPIO_STATUS_MASK and GPIO_WAKE_MASK already have definitions in the code
so use those instead of magic numbers.
TEST=Timeless build results in identical image for amd/mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0bc9e1cecf2f063b42de3f8875fee421dd256648
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The definitions of GPIO_INT_ENABLE_STATUS_DELIVERY and
GPIO_TIMEBASE_62440uS fit into 96 characters, so remove the unneeded
line breaks.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4b9c3885259b9acf0539eed14e23fbbb0deccea7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
The corresponding bit is marked as reserved in the following versions of
the documentation for all SoCs using this code:
Mullins: BKDG #52740 Rev 3.05
Stoneyridge: BKDG #55072 Rev 3.04
Raven1, Picasso: PPR #55570 Rev 3.16 & 3.18
Raven2: PPR #55772 Rev 3.08
Cezanne: PPR #56569 Rev 3.03
The old Rev 3.14 of the Picasso PPR #55570 had the bit 19 defined as
PullUpSel, but this is no longer the case in newer versions. It is
unclear if this got de-featured or if it was never present in the
silicon. To be consistent with the current documentation, drop this
define.
This patch also change the definition of GPIO_PULL_MASK to only cover
the bits used for the feature. The Cezanne PPR #56569 Rev 3.03 states a
default value of 0 for this bit after reset, so the resulting values in
the register aren't expected change. The other PPRs/BKDGs don't specify
a reset value for this bit, but it's likely safe to assume that all SoCs
that use the new GPIO interface use the same GPIO building block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaf2d4eec7a13e558c75d7edea343b876909a5b33
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
On ADL, we actually use debug consent 2 for soc debug by DBC
Change-Id: Ie6fbf3cdcf5dcd1a11a895ea83f55157a2ac4eb9
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update SA table as per latest EDS (Doc no: 601458).
Add extra SKUs accordingly.
Signed-off-by: Rick Lee <rick.lee@intel.com>
Change-Id: Ia2bb9e54456dbea634c2b8e192f9fe813b9e6706
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Lean Sheng Tan
Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
|
|
- Add 4 TEMP_SENSORs
- Configure granularity of power limits
BUG=b:200836803
TEST=USE="project_primus emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Ariel_Fang <ariel_fang@wistron.corp-partner.google.com>
Change-Id: Id4d8dbe678b7f0870aeffa0a0118e65de9d5c22d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Update thermal setting from thermal team.
BUG=b:205648035
TEST=build and verified by thermal team.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: If5082462b79c88ecf510f7a552381c792604366e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The cpu_relax method is defined for x86. This CL adds a no-op method so
that it can be used in common code.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ifcb4546ceb2894eeb37589d0282b7e076d7a4747
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I3c252e31867e4560fb5aaf12273288f4ff18ae3d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59471
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Set power limits for kano based on CPU SKUs.
BUG=b:205648035
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I25cf9be68f8981d8307b4c15ab9f65b59058fb19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch moves common thermal API between chipsets
with thermal device as PCI device and thermal device behind PMC
into common file (thermal_common.c).
Introduce CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV to let SoC
Kconfig to select as applicable for underlying chipset.
+------------------------------------------------------+--------------+
| Thermal Kconfig | SoC |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV | SKL/KBL, CNL |
| | till ICL |
+------------------------------------------------------+--------------+
| CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC | TGL onwards |
| | ICL |
+------------------------------------------------------+--------------+
Either of these two Kconfig internally selects
CONFIG_SOC_INTEL_COMMON_BLOCK_THERMAL to use common thermal APIs.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp platform.
Change-Id: I14df5145629ef03f358b98e824bca6a5b8ebdfc6
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable DRIVERS_GENESYSLOGIC_GL9750 support for Gimble.
BUG=b:206014046
TEST=USE="project_gimble emerge-brya coreboot" and verify it builds
without error.
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: Ifc490e6e081b6a8534656417603d2916c3edcb05
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59579
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
commit e0844636aca974449c7257e846ec816db683d0b9 (acpi: Move ACPI table
support out of arch/x86 (2/5)) moved the main acpi header file from
arch/x86/include/acpi/acpi.h to include/acpi/acpi.h, so change the
comment in here to point to the current location.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5fddd1cd5eefd83816b1c966b5c7edf53eb2486d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I585691038690f1d6855ab09f1ca5791a18cfdbfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icb1c7b243f655225347ba2a78c80e6e8653e8cda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Cezanne already uses a define for this and it's better to define and use
constants instead of magic values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifa4b3b3cdb161670128b284a3396fc5a85545608
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
CB:59479 introduced a blank default statement. This is treated as an
error or warning on some older toolchains. Add a break statement on
default case.
BUG=None
TEST=Build the Guybrush mainboard.
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Change-Id: I3d034cfebc8b8ae7d7024d41b4b2207cdeb083e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
|
|
Disable PSE loading by default. If left enabled (current default),
the EHL coreboot will end up in endless restart loop, due to FSP
unable to locate PSE FW image and trigger global reset.
However disabling this flag (PchPseEnable) will cause the coreboot
to trigger a single reset due to CSE signal (HECI: CSE does not
meet required prerequisites). The reason behind this is that FSP
need to perform static disabling (power gate) to fully shut down
PSE HW, and to do this will need to global reset entire system
including CSE. Then PMC will power gate PSE from the start.
To avoid this behavior, the best way to disable PSE is to disable
via IFWI FIT softstrap (For specific detail can refer to Intel EHL
coreboot MR2 release notes). With this, PMC will power gate PSE
from the first cold boot and system will boot happily without
single reset behavior.
Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Change-Id: Iccc0ab1c2e4ebb53013795933eb88262f70f456f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
It was already enabled on T520 and L520, but disabled on X220, T420 and
T420s.
On X220, it was disabled by commit 0793afe9 (mb/lenovo/x220: disable ME).
I can't reproduce those issues today on linux 4.4 and linux 5.13.
Also, it breaks the me_disable feature, we already have a Kconfig option
to hide MEI in case of errors, and it will be hidden on disabled,
recovery, firmware update paths anyway.
Change-Id: I8e6d067a9c728443d00df541ac7a9a878df58b6a
Signed-off-by: Evgeny Zinoviev <me@ch1p.io>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
The Prodrive Hermes mainboard has four i211 Ethernet NICs and an i210
Ethernet NIC, but their numbering isn't consistent with the PCIe root
port function numbers. With only a M.2 SSD plugged in, Linux uses the
following names:
PHY 0 ---> enp6s0
PHY 1 ---> enp4s0
PHY 2 ---> enp3s0
PHY 3 ---> enp1s0
PHY 4 ---> enp2s0
These names change after adding or removing PCIe devices in slots
connected to root ports that get enumerated before the NICs' root
ports, because the assignment of secondary bus numbers depends on
the enumeration order. Because of this, the "predictable" network
interface names are not at all predictable, which is awful.
To avoid this, describe the NICs using SMBIOS Type41 entries with the
correct instance numbers. With this patch, Linux uses these names:
PHY 0 ---> eno0
PHY 1 ---> eno1
PHY 2 ---> eno2
PHY 3 ---> eno3
PHY 4 ---> eno4
No matter what PCIe devices are present, these names don't change.
Change-Id: I7a527298f84172f9135006083ad7e748dcc27911
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58628
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable PCI_EXP_EN, PME_EN and PME_B0_EN GPEs used for PCI devices.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I4480921a294f35a0dfe1e5acd90d55f6fb4c85b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie1b270d49660fd60b6a91194167467c4453e1b6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Select the EC option on boards with dGPUs to report GPU temperature and
fan data.
Tested on system76/oryp6. The GPU fan speed is reported in sensors when
the system is under load.
system76_acpi-acpi-0
Adapter: ACPI interface
CPU fan: 1985 RPM
GPU fan: 2348 RPM
CPU temp: +68.0°C
GPU temp: +0.0°C
Change-Id: Ieb45dc277c7eb11be1c50b9a9e3e20e3a88578b7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
Add a new config for boards with dGPUs to enable reporting fan duty and
temperature. The dGPU is not yet enabled on any boards, so it always
reports the temp as 0. However, the EC firmware does use the dGPU's fan
and so reports valid information for fan speed.
Change-Id: Iae1063ee6a082a77ed026178eb9471bbc2b2fadf
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57881
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add CMOS option to set IME mode. Default to "Disable" for CNL and TGL-H,
and "Enable" for TGL-U. Not set for KBL, which uses ME_CLEANER.
The HECI device must be enabled in devicetree for switching modes to
function correctly.
Change-Id: I3163dcb0a4af020c2cf6f94f2bb26380f17c253e
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
When the cpu_cl_discovery is called, coreboot actually assigns a BAR
to cpu crashlog pci device. Hence, we don't need to assign a tmp BAR
for cpu crashlog pci device
BUG=b:195327879
TEST=Found BERT table is created and the tcss function is ok in depthcharge
Change-Id: Ib7e6772be51ec4f26ef31fed6cb2bddef8ffc6be
Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
With cr50 fw 0.3.22 or older version, it needs to disable autonomous
GPIO power management and then can update cr50 fw successfully.
BUG=b:202246591
TEST=FW_NAME=redrix emerge-brya coreboot chromeos-bootimage.
Change-Id: Idc01ebb4d3ef990f24f18bef5424b7d6ba683d49
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
libcbfs has a workaround to avoid writing to ROM areas:
/* Hacky way to not load programs over read only media. The stages
* that would hit this path initialize themselves. */
if ((ENV_BOOTBLOCK || ENV_SEPARATE_VERSTAGE) &&
!CONFIG(NO_XIP_EARLY_STAGES) && CONFIG(BOOT_DEVICE_MEMORY_MAPPED)) {
This workaround is not triggered in QEMU, because
BOOT_DEVICE_MEMORY_MAPPED is only selected for SPI boot devices. This
results in confusing (to the VMM developer) writes to read-only
memory.
As far as I can tell, this issue is weird but harmless, because the
code does memcpy to ROM with source == destination. The concensus in
the mailing list thread [1] was that it's worthwhile to be fixed
regardless.
[1] https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/message/KDI6YQCPXSQF4NDUAAC7TIXQKSZ6T4X7/
Change-Id: I5cefbc31f917021236105f7dc969118d612ac399
Signed-off-by: Julian Stecklina <julian.stecklina@cyberus-technology.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
change TP_EN pin to GPIO_67 for quackingstick
BUG=b:206862167
BRANCH=trogdor
TEST=make
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Change-Id: I7cc1083111f46cd3489cbbb9e579c34dc972b0b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
The device is a PCIe Gen1 to SD 3.0 card reader controller to be
used in the Chromebook. The datasheet name is GL9750S and the revision
is 01.
The patch disables ASPM L0s.
BUG=b:206014046
TEST=Verify GL9750 enters L1 by observing CLKREQ# de-asserts.
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Change-Id: I6d60cef41baade7457a159d3ce2f8d2e6b66e71c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This file is using cpuid_result and cpuid(). I also removed the spinlock
header since it's not used. This is what was previously providing the
cpu.h header.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idc3daa64562c4a4d57b678f13726509b480ba050
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Introduce firmware-power-managed DSD ACPI property for TPM devices.
This property can be checked by the kernel TPM driver to override how
the TPM power states are managed. This is a tri-state flag, true,
false, or unset. So an enum used to keep the flag is unset by default.
When firmware-power-managed is true, the kernel driver will not send a
shutdown during s2idle/s0i3 suspend.
BUG=b:200578885
BRANCH=None
TEST=TPM shutdown is triggered on s0ix suspend on guybrush with patched
kernel
Change-Id: Ia48ead856fc0c6e637a2e07a5ecc58423f599c5b
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Add option to initialize the TPM in PSP verstage during s0i3 resume.
This is needed if the TPM is reset in s0i3. FSDL is handling
restoring everything else, so only the minimum TPM initialization is done.
Move aoac and i2c init before psp_verstrage_s0i3_resume becasue i2c
needs to be ready before attempting to restore tpm.
BUG=b:200578885,b:197965075
TEST=Multiple cycles of S0i3 suspend resume. ~66ms of additional delay.
BRANCH=None
Change-Id: Ie511928da6a8b4be62621fd2c4c31a8d1e724d48
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The "internal audio connection" setting is actually about the front
panel audio. Rename functions and variables to reflect this.
Change-Id: I1be8f68ac3e8b91bc4983dc06daa37afb7bdf926
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58904
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin van Son <justin.van.son@prodrive-technologies.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Given EC CON and associated USB port objects, custom_pld or pld_group
information is retrieved from port and added to ACPI table as _PLD field
for typec connector.
BUG=b:202446737
TEST=emerge-brya coreboot & SSDT dump in Brya test device
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ibc56ecd4e8954ffaace3acd9528a064b5fa2cf6f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ADL-M has its own set of VBT files to pick during execution,
this will avoid any conflict with other ADL variants.
VBT files added at chrome-internal:4138272
BUG=None
TEST= Boot device on LP5/LP4, corresponding VBT file should be loaded.
Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com>
Change-Id: Ibbf3f11c9277f5dcb3e12f9020f54ec843444c3f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58202
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
arch/ppc64/include/arch/io.h: use proper instructions for IO operations
Those instrunctions are:
* Load {byte,half,word} and Zero Caching Inhibited indeXed (l*zcix)
* Store {byte,half,word} Caching Inhibited indeXed (st*cix)
for in* and out*, respectively.
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
arch/ppc64/include/arch/io.h: implement istep reporting
Change-Id: Ib65c99888ba2e616893a55dff47d2b445052fa7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There seems to be no operational differences between x86 and PPC64 for
UART 8250. Port number is the same. References:
* https://github.com/open-power/docs/issues/25
* https://github.com/3mdeb/openpower-coreboot-docs/blob/main/devnotes/porting.md#enabling-console
Tested on Talos II (https://raptorcs.com/TALOSII/). Works in QEMU as
well (actually in QEMU it works even without this change somehow).
Change-Id: Ib06001076b8eaa577a8d2159afea20afb610687d
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add events for Chrome OS diagnostics in eventlog tool:
* ELOG_TYPE_CROS_DIAGNOSTICS(0xb6): diagnostics-related events
* ELOG_CROS_LAUNCH_DIAGNOSTICS(0x01): sub-type for diagnostics boot
These events are not added anywhere currently. They will be added in
another separate commit.
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: I1b67fdb46f64db33f581cfb5635103c9f5bbb302
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some weird things happen inside FSP and the routing is not correctly
applied, with PIN D being used but lacking a proper routing in ACPI.
To work around this issue generate _PRT for all 4 INT pins.
Change-Id: I5be6e4514f8c6a47bb887d9f9b95181c9f426a51
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add Kconfig item ENABLE_TCSS_DISPLAY_DETECTION.
TEST=Build with the VBT provided in issue b:199490251. Check the dev screen in bios-stage.
BUG=b:199490251, b:206014054
Signed-off-by: Adam Liu <adam.liu@quanta.corp-partner.google.com>
Change-Id: I5f34be030a6d819a0e93a2d479c4ff41bb14cfe2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Brya schematic will swap TPM I2C with touchscreen I2C,
so move into variant level.
BUG=b:195853169
TEST=build pass.
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: Ie5276527da135ec15045a81985ae006722871b0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Added fw_config_probe method to distinguish different audio codecs to
facilitate the use of different topology files by the OS.
BUG=b:205883511
TEST=emerge-brya coreboot chromeos-bootimage and check audio function
Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com>
Change-Id: I0d5b95e89154b2cb6b371f24cc1b151c23ff642f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
ALC5682I-VS will use in next build.
BUG=b:194367025
TEST=none.
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I34d736fe1c39860443dac07435a21ccd0ee2f21c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tested using MrChromeBox's `uefipayload_202107` branch:
* Windows 10
* Ubuntu 20.04
* MX Linux 19.4
* Manjaro 21
No known issues.
https://starlabs.systems/pages/starbook-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I090971a9e8d2be5b08be886d00d304607304b645
Reviewed-on: https://review.coreboot.org/c/coreboot/+/56088
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable Acoustic noise mitigation for bugzzy and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:207046230
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Id249a143efb9bce70f48fb466fed42e766a10937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add .enable method that will set the CSME state. The state is based on
the new CMOS option me_state, with values of 0 and 1. The method is very
stable when switching between different firmware platforms.
This method should not be used in combination with USE_ME_CLEANER.
State 1 will result in:
ME: Current Working State : 4
ME: Current Operation State : 1
ME: Current Operation Mode : 3
ME: Error Code : 2
State 0 will result in:
ME: Current Working State : 5
ME: Current Operation State : 1
ME: Current Operation Mode : 0
ME: Error Code : 0
Tested on:
KBL-R: i7-8550u
CML: i3-10110u, i7-10710u
TGL: i3-1110G4, i7-1165G7
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I374db3b7c0ded71cdc18f27970252fec7220cc20
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add EC support that supports different Q Events and EC memory.
Created from the ITE IT5570E and IT8987E datasheets, all using
data port 0x4e.
Tested with Ubuntu 20.04.3 and Windows 10 on:
* StarBook Mk V (TGL + IT5570E):
* ITE Firmware 1.00
* Merlin Firmware 1.00
* LabTop Mk IV (CML + IT8987E):
* ITE Firmware 1.04
* LabTop Mk III (KBL + IT8987E):
* ITE Firmware 3.12
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58343
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Andy Pont <andy.pont@sdcsystems.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes unused header inclusion as <intelblocks/thermal.h>
from several SoC finalize.c files.
Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Thermal configuration registers are now located behind PMC PWRMBASE
for Alder Lake Point PCH. Hence, ADL SoC to select
SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold
is being set as per mainboard provided `pch_thermal_trip`.
Note: These thermal configuration registers are RW/O hence, setting
those early prior to FSP-S helps coreboot to set the desired low
thermal threshold for the platform.
BUG=b:193774296
TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior
to FSP-S shows that registers are now programmed based on
'pch_thermal_trip' and lock register BIT31 is set.
Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set low maximum temp threshold value used for dynamic thermal sensor
shutdown consideration.
BUG=b:193774296
Change-Id: I7ee199c19a9d926a4135eeef3b3b481fbff74a79
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
Thermal configuration has evolved over PCH generations where
latest PCH has provided an option to allow thermal configuration
using PMC PWRMBASE registers.
This patch adds an option for impacted SoC to select the Kconfig
for allowing thermal configuration using PMC PCH MMIO space.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp platform.
Change-Id: I0c6ae72610da39fc18ff252c440d006e83c570a0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59209
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove old code in favour of new format of firmware API.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iaf8f37a08c232b8754e57f022782f21284fa07dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58344
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch uses `clrsetbits32` helper function to set thermal
device Low Temp Threshold (LTT) value.
BUG=b:193774296
TEST=Able to build and boot hatch and adlrvp with this change.
Change-Id: I51fea7bd2146ea29ef476218c006f7350b32c006
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59310
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures IA common thermal block is now able to compile
under romstage with necessary compilation issues fixed.
BUG=b:193774296
Change-Id: I3279f55436977ab9a47e04455d8469e50b5c33c8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59391
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
`struct device *dev` as part of the pch_get_ltt_value() argument is
being used hence, replace with `void`.
BUG=b:193774296
Change-Id: Iecdf6f6c3023f896a27e212d7c59b2030a3fd116
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59390
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch updates the VccIn Aux Imon IccMax for ADL-M
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: I21753f2e5e9867f22c05e087cbf1f1e097d28bca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57325
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
