Age | Commit message (Collapse) | Author |
|
Found using:
diff <(git grep -l 'include <cpu/x86/mp.h>' -- src) <(git grep -l 'CACHELINE_SIZE\|cpu_info\|mfence\|mfence\|mp_ops\|mp_init_with_smm\|MP_RUN_ON_ALL_CPUS\|mp_run_on_aps\|mp_run_on_all_cpus\|mp_park_aps\|smm_initiate_relocation_parallel\|smm_initiate_relocation' -- src/) |grep '<'
Change-Id: Ib721e667144d6803261f3761a077570e0e27391d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42395
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/tsc.h>' -- src/) <(git grep -l 'TSC_SYNC\|tsc_struct\|rdtsc\|tsc_t\|multiply_to_tsc\|rdtscll\|tsc_to_uint64\|tsc_freq_mhz\|tsc_constant_rate' -- src/)|grep '<'
Change-Id: Id090e232a96323adb8d9a24b81f7ae5669248f57
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42393
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <cpu/x86/msr.h>' -- src/) <(git grep -l 'IA32_EFER\|EFER_\|TSC_MSR\|IA32_\|FEATURE_CONTROL_LOCK_BIT\|FEATURE_ENABLE_VMX\|SMRR_ENABLE\|CPUID_\|SGX_GLOBAL_ENABLE\|PLATFORM_INFO_SET_TDP\|SMBASE_RO_MSR\|MCG_CTL_P\|MCA_BANKS_MASK\|FAST_STRINGS_ENABLE_BIT\|SPEED_STEP_ENABLE_BIT\|ENERGY_POLICY_\|SMRR_PHYSMASK_\|MCA_STATUS_\|VMX_BASIC_HI_DUAL_MONITOR\|MC0_ADDR\|MC0_MISC\|MC0_CTL_MASK\|msr_struct\|msrinit_struct\|soc_msr_read\|soc_msr_write\|rdmsr\|wrmsr\|mca_valid\|mca_over\|mca_uc\|mca_en\|mca_miscv\|mca_addrv\|mca_pcc\|mca_idv\|mca_cecc\|mca_uecc\|mca_defd\|mca_poison\|mca_sublink\|mca_err_code\|mca_err_extcode\|MCA_ERRCODE_\|MCA_BANK_\|MCA_ERRTYPE_\|mca_err_type\|msr_set_bit\|msr_t\|msrinit_t' -- src/) |grep '<'
Change-Id: I45a41e77e5269969280e9f95cfc0effe7f117a40
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41969
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: I1ca111a30153526c3915bf393208fb2b4c569c01
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43347
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: I85745c331c81a419cef4547fc1c67bde1e202e8f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43346
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: If8384f4fea66e26d7377311e7bd8379c7848a26f
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43345
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: I659a067e3b737dc7efe5bdadfd88207cd4d7175d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43344
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: I43b8ba5849de30e2ee253382ef85b17f2d0ae589
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43343
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>.
Change-Id: Ibdde8fb5ec5bf7d25facd78064a7837d24fa2c8a
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43342
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace unused <stddef.h> with missing <stdint.h>. This is needed for 'u64'.
Change-Id: Ie99c27bd6a7d982bba9a93342f3e3b83a1c09e8d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <stdint.h>' -- src/) <(git grep -l 'int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I5e14bf4887c7d2644a64f4d58c6d8763eb74d2ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41827
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
size_t needs <stddef.h>. Replace unused <stdint.h> with <stddef.h>.
Change-Id: Ib9ab5555adeeddd9eea7a93dbb166d8479eca42e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43340
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Files found using:
diff <(git grep -l '#include <types.h>' -- src/) <(git grep -l 'BIT(\|size_t\|wchar_t\|wint_t\|NULL\|DEVTREE_EARLY\|DEVTREE_CONST\|MAYBE_STATIC_NONZERO\|zeroptr\|int8_t\|int16_t\|int32_t\|int64_t\|intptr_t\|intmax_t\|s8\|u8\|s16\|u16\|s32\|u32\|s64\|u64\|INT8_MIN\|INT8_MAX\|INT16_MIN\|INT16_MAX\|INT32_MIN\|INT32_MAX\|INT64_MIN\|INT64_MAX\|INTMAX_MIN\|INTMAX_MAX\|bool\|true\|false\|cb_err\|CB_SUCCESS\|CB_ERR\|CB_ERR_ARG\|CB_CMOS_\|CB_KBD_\|CB_I2C_\|cb_err_t\|DIV_ROUND_CLOSEST\|container_of\|__unused\|alloca(\|ARRAY_SIZE\|ALIGN\|ALIGN_UP\|ALIGN_DOWN\|IS_ALIGNED\|__CMP_UNSAFE\|MIN_UNSAFE\|MAX_UNSAFE\|__CMP_SAFE\|__CMP\|MIN(\|MAX(\|ABS(\|IS_POWER_OF_2\|POWER_OF_2\|DIV_ROUND_UP\|SWAP(\|KiB\|MiB\|GiB\|KHz\|MHz\|GHz\|offsetof(\|check_member\|member_size' -- src/)|grep -v vendor |grep '<'
Change-Id: I5d99d844cc58d80acb505d98da9d3ec76319b2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41677
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <string.h>' -- src/) <(git grep -l 'STRINGIFY\|memcpy\|memmove\|memset\|memcmp\|memchr\|strdup\|strconcat\|strnlen\|strlen\|strchr\|strncpy\|strcpy\|strcmp\|strncmp\|strspn\|strcspn\|strtok_r\|strtok\|atol\|strrchr\|skip_atoi\|snprintf' -- src/) |grep -v vendorcode |grep '<'
Change-Id: I12802d0a6254b2fa39d59f485008bb2012f7b32d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41913
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add USB ports, USB user-facing camera and USB bluetooth to devicetree.
USB ports 4 and 5 are duplicated for picasso and dali.
BUG=b:158096224
TEST=Boot Trembyle and Dalboz, Dump acpi tables
Change-Id: Icf8628d91e27a3afdc5fd67a53b44089c809da87
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42799
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Split zork baseboard devicetree between dalboz and trembyle.
The devicetree is simply duplicated, no other changes in this commit.
BUG=b:158096224
TEST=Build coreboot for zork
Signed-off-by: Rob Barnes <robbarnes@google.com>
Change-Id: I5b26770790092c69db9567fa4337edd21a6ed809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42741
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Screen flickered on VT2 on some devices after idle a period of time.
Remove SSR (1/8) setting for SA to default SSR (1/2), screen flicking
issue disappeared, and didn't affect acoustic noise much.
Because CB:38212 (commit eae254e) caused this issue.
BUG=b:160754994
TEST=build dratini, observe that screen flick issue disapppered
Change-Id: I9e81c2f15dd6babfa360eee213fc4ab6310c7455
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43284
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SaGv needs to be enabled for only QS. On ES2, we are seeing system
instability.
BUG=b:159198381
TEST=Tested for boot. Power and performance tests were run with
volteer2 with qs setup. System showed stability.
Tested for boot stability on on delbin.
Change-Id: I1bce3b9f837fb19ba5a20ae31750a73474a86788
Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
New boards introduced to Kukui family.
BUG=b:160854400
TEST=make # select Cerise and Stern
BRANCH=kukui
Change-Id: I5841d57c0891d5191dd96097b90da889855b56c8
Signed-off-by: xuxinxiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43320
Reviewed-by: Zhaoyou Hong <hongzhaoyou@huaqin.corp-partner.google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reduces differences with Broadwell.
Tested with BUILD_TIMELESS=1, Google Panther remains identical.
Change-Id: I81c34fd03a176d0575f2fbd254052d90f2b38487
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Configure volteer2 and delbin, the two variants currently using
preQS or QS silicon, to use CSE Lite.
BUG=b:158140797
TEST=cd to volteer's asset_generation folder, execute
"./gen_all_variant_images.sh" and verify that all variant
images are produced.
Change-Id: I5e444529b090d82094b9da0df2648ea4cdb2888e
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Extract DRAM info from AMD_FSP_DMI_HOB and store it as mem_info in
cbmem with id CBMEM_ID_MEMINFO. Subsquently extract mem_info objects
from cbmem to build SMBIOS type 17 tables.
BUG=b:148277751,b:160947978
TEST=dmidecode -t 17
BRANCH=none
Change-Id: Iacedbb017d19516674070f89ba0aa217f55383e3
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
CB:43224 ("mb/google/zork: Add helpers for v3 schematics and wifi
power enable") added helper functions for determining if a board uses
v3 schematics. However, it introduced a regression by adding a wrong
check for variant_uses_v3_schematics() in variant_audio_update(). This
change fixes the check to ensure that dmic_gpio is updated when
variant is not using v3 schematics.
BUG=b:161141258,b:161128964
TEST=Verified on trembyle that trackpad works again (it was broken
because of the regression).
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I0e6ad844f68cface7b545f1547bd94470c30dde4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43415
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the woomax variant of the zork reference board by copying
the template(coreboot-zork/util/mainboard/google/trembyle)
files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:158343602
BRANCH=None
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I0bb8ce1851f4064d24e48fd8957e2f9fe1e80b53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I2994b8bf5521b539a9f3585a3221452b1807837a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Change SPI speed from 66MHz, mode 1-1-2 to 100MHz mode 1-2-2.
“1-2-2" means command, address and data are transmitted
through 1 wire, 2 wire and 2 wire, respectively.
BUG=b:160603142
TEST=Boot on trembyle, verify register settings.
Signed-off-by: Martin Roth <martinroth@chromium.org>
Change-Id: I14f96e3c085126c70e64ef3a3f5b7b54ce6cbffe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43306
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- Correctly detect device 17h as the MMC 4.5 controller
- Support detection of the "old" MMC controller at device 10h
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Change-Id: I9f0007b1cf01df09f775c088397c3b9c846908c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43086
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
As with other macros, convert PAD_CFG0_ROUTE_* to PAD_IRQ_ROUTE() to
make the code in gpio_defs.h cleaner.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard
does not change.
Change-Id: Iadc9c4b3c96ae04c56d060cb060737a8eba7f165
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41034
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Converts PAD_CFG0_RX_POL_* macros to PAD_RX_POL() to make the code
cleaner and reduce the length of the macro.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard
does not change.
Change-Id: I09a048fd38ccb994f53c8829c549bc2b368fa546
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41033
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Converts PAD_CFG0_TRIG_ * macros to PAD_TRIG() to make the code cleaner
and reduce the length of the macro, which is often used.
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 & T10-TNI carrierboard
does not change.
Change-Id: I9e1b4118fd6c6f0d58ee38a743aa8c27535f0dd9
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41032
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds SMI handler for SCI, S3/S5 wake up and LID closed
events on tglrvp platform.
TEST=Built image and booted to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I0bc72f164e86f1921e0cad39f9749e8e3be0778f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This change allows EC to change state of host-controlled USB MUX.
TEST=Built image and booted to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ia7c331157b1b4039e42c373f5b130a66f7594458
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42955
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Coverity detects dereferencing a pointer that might be "NULL" when
calling acpigen_write_scope. Add sanity check for scope to prevent
NULL pointer dereference.
Found-by: Coverity CID 1420207
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Icc253c63aadef1c0ecb116a38b608f64f80abc79
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set default of PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE to n as this breaks
booting Windows with a PCIE NVIDIA.
Change-Id: Ie8768b91c27c4159f9b3c7f94699134a82decea0
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
Current the common soc code automatically selects PCIEXP_CLK_PM and
PCIEXP_L1_SUB_STATE which breaks booting Windows with a PCIE NVIDIA
graphics card attached on mainboards that do not have a CLKREQ# signal.
This is commonly used on server and workstations boards where the
additional power savings of L1 substate are not required.
Make the PCIEXP_CLK_PM and PCIEXP_L1_SUB_STATE default y but do not
select it anymore by the soc code, thus we can disable it in the
mainboard code.
Tested on CFL with Windows 10.
Change-Id: I025e13d6d8183256647e4c034e31bafa235f7eb7
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41696
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch converts the current DPTF policies from static ASL files into
the new SSDT-based DPTF implementation. All settings are intended to be
copied exactly.
Change-Id: I964c53afbd503d47a07b982672425f0e7a986a3f
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41895
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For variants with slightly different GPIO configuration, add support to
pass an override GPIO configuration table.
BUG=None
TEST=Build and boot the waddledee mainboard.
Change-Id: I2f1c6dc2ea5499bff96a471c4461339ef01ee19a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43279
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Delta Lake uses GPIO pin GPP_B20 for POST complete event,
BIOS needs to pull this pin low for BIC (Bridge IC) to start
reading sensors.
Tested=On Delta Lake oBMC, bic-util slotx --get_gpio to confirm
the pin is low.
Change-Id: I7e05f8a7caead8ee0632af4ff60ccd8b2412b3dd
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43162
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This change enables PCIEXP_HOTPLUG to support resource allocation for
TCSS TBT/USB4.
BUG=b:149186922
Change-Id: Id3066204c8a780ade251c7be4052a60a861e43db
Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Share "EC in RW" GPIO with depthcharge. Also we define the CONFIGS
needed CHROME, CHROME_EC and use the chrome lid and recovery.
BUG=None
BRANCH=None
TEST=Build and boot TGL RVP. Check recovery works with
crossystem recovery_request.
Change-Id: I1e88200e3f8418e5b0ab39ac65ed1b3545ce111e
Signed-off-by: Shaunak Saha <shaunak.saha@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
|
|
Platform HOBs (in particular IIO_UDS and MemoryMap HOBs) are of HOB type
HOB_TYPE_GUID_EXTENSION, therefore they do not have resource structure.
Remove the erroneous code related to resource structure.
Remove unnecessary function prototypes from header files, and define them
as static in hob_display.c.
Since we have the HOB pointer, there is not need to search HOB by GUID.
Remove unnecessary calling of fsp_find_extension_hob_by_guid().
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com>
Change-Id: Ib99bce39e6eb2aeb95242dfba36774653bbe91fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43335
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:160741778
TEST=build drawcia, and check camera can be regconized
Change-Id: I67bee9773b53451653abd76088d1d4062fe3da8f
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42929
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Select the drivers for ALC5682 codec and MX98360A spk amp
BUG=b:158202026
TEST=FW_NAME=drawcia emerge-dedede coreboot chromeos-bootimage
Change-Id: If271f11f10a85ade6f61ff8c25bfafeb67a69af6
Signed-off-by: Wisley Chen <wisley.chen@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Provide the data structures for parsing SPD information
supplied by FSP.
BUG=b:160947978
Change-Id: If847646625448547599018a823712d5c14e4bd76
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43350
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a weak function mainboard_rtc_failed() for mainboard customization.
Check RTC_PWR_STS bit for RTC battery removal or CMOS clear jumper
triggered event.
Signed-off-by: Jingle Hsu <jingle_hsu@wiwynn.com>
Change-Id: Ic6da84277e71a5c51dfa4d97d5d0c0184478e8f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43004
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Read VPD variable 'fsp_log_enable' to decide enabling FSP log or not.
With VPD_RW_THEN_RO, VPD_RW takes precedence over VPD_RO, and
would be set to enabled if both places cannot find it.
Tested=On OCP Delta Lake, use vpd to create and set fsp_log_enable
and verified the results are expected.
Change-Id: I0b3463acedd90e8e17f7e4eedc2fab63644f87e1
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42903
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: insomniac <insomniac@slackware.it>
|
|
CPX-SP FSP ww28 release adds UPDs to allow enablement of VT-d and VMX.
Also update IIO UDS HOB definition file accordingly.
Intel CPX-SP FSP has been using FSPM_CONFIG intead of FSP_M_CONFIG.
Other Intel FSPs have been using FSP_M_CONFIG. The feedback from Intel
is that they will converge to use FSPM_CONFIG over time. So both will
co-exist for some time. Today coreboot common code expects FSP_M_CONFIG.
Accomodate this situation in FspmUpd.h.
The CPX-SP soc code is updated accordingly.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: If6d0a041eaad9eb2f811e74d219fff1cc38e95a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
On ChromeOS systems with a serial-enabled BIOS and vboot writing a new
firmware image to the Chrome EC, it was possible for the TCO watchdog
timer to trip 2 times before tco_configure() was called in romstage.
This caused an extra reboot of the system (at a rather inopportune time)
and because the EC didn't perform a full reset, the system boots into
recovery mode.
This patch moves the call to tco_configure() for Tiger Lake from
romstage to bootblock, in order to make sure the TCO watchdog timer is
halted before vboot_sync_ec() runs in romstage. It should be harmless to
configure the TCO device earlier in the boot flow.
BUG=b:160272400
TEST=boot Volteer (to a non-recovery kernel!) with a freshly imaged EC
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Iefdc2c861ab8b5fde7f736c04149be7de7b3ae0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43313
Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IRQ 10 and IRQ 11 are valid for all southbridges using this code, as per
their respective datasheets. So, add them for the sake of completeness.
Change-Id: Ib4504861ed316a95b9735e0ed79f108f18071b3b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43158
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Ida12426c51313a7642b5c363e58a79d77b1b096b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I65fedfa7e8b2fbb72b3109a8790445e38909976a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I8280d29b9a7bc835c2cb7e3e3dfca70768672a5f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This change enables s0ix for tglrvp up3 and up4 platform.
TEST=Built image and booted to kernel.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I657bee1d7ee120ae15ccb4a33f9eb2fcf5cca65a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42954
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable CpuReplacementCheck for TGLRVP with a CPU socket.
Test=build and verified with tglrvp
Change-Id: I75b4a4609c172c341087077228e23c6d31a9e7e1
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This adds Type-C Intel Input Output Manager(IOM) device with HID
INTC1072. It provides MMIO range from 0xfbc10000 with size 0x1600.
Intel Input Output Manager(IOM) kernel driver reads relevant
information such as Type-C port status (whether a device is connected
to a Type-C port or not) and the activity type on the Type-C ports
(such as USB, Display Port, Thunderbolt) using this memory resource.
BUG=b:156016218
TEST=Able to detect USB, TBT and USB4 on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: Ic733e831643bda6e052edf797ba0e6206eb4ddd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41762
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds Type-C IO Manageability engine base address and size.
Tigerlake EDS(#575681) section 3.4.3 describes host bridge
REGBAR(MCHBAR) + 7110h for IOM REGBAR with size 1600h. IOM has a
port ID 0xc1. MCHBAR is programmed with 0xfedc0000. IOM REGBAR is
determined from mmio (MCHBAR + 0x7110), which has value 0xfb000000.
IOM has base address 0xfbc10000 from IOM REGBAR + (0xc1 << 16).
BUG=:b:156016218
TEST=Built and booted on Volteer.
Signed-off-by: John Zhao <john.zhao@intel.com>
Change-Id: I70d88ba318087f7acacd1ee84609c9db5b65f907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41759
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Rajmohan Mani <rajmohan.mani@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new IGD device ID for new Tigerlake SKU support.
BUG=b:160394260
Branch=None
TEST=build, boot and check IGD device is reported.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I1903d513b61655d0e939f80b0fd0108091fdd7e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
We only want to return an ACPI name for a USB port if the controller
physically has the port. This has the desired side effect of making the
usb_acpi driver skip generating an ACPI node for a device which has
no port. This prevents writing an invalid SSDT table which the OS then
complains about.
BUG=b:154756391, b:158096224
TEST=Boot picasso trembyle and verify HS05, HS06 and SS05 are no longer
generated. Also checked the logs and saw the devices being ignored.
\_SB.PCI0.LPCB.EC0.CREC.TUN0: Cros EC I2C Tunnel at GENERIC: 0.0
\_SB.PCI0.LPCB.EC0.CREC.MSTH: Cros EC I2C Tunnel at GENERIC: 1.0
\_SB.PCI0.LPCB.EC0.CREC.ECA0: Cros EC audio codec at GENERIC: 0.0
\_SB.PCI0.PBRA.XHC0.RHUB.HS01: Left Type-C Port at USB2 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.HS02: Left Type-A Port at USB2 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.HS03: Right Type-A Port at USB2 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.HS04: Right Type-C Port at USB2 port 3
xhci_acpi_name: USB2 port 4 does not exist on xHC PCI: 03:00.3
xhci_acpi_name: USB2 port 5 does not exist on xHC PCI: 03:00.3
\_SB.PCI0.PBRA.XHC0.RHUB.SS01: Left Type-C Port at USB3 port 0
\_SB.PCI0.PBRA.XHC0.RHUB.SS02: Left Type-A Port at USB3 port 1
\_SB.PCI0.PBRA.XHC0.RHUB.SS03: Right Type-A Port at USB3 port 2
\_SB.PCI0.PBRA.XHC0.RHUB.SS04: Right Type-C Port at USB3 port 3
xhci_acpi_name: USB3 port 4 does not exist on xHC PCI: 03:00.3
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ia645380bea74f39fd94e2f9cbca3fcd4d18a878e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43354
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This removes some boilerplate code.
BUG=b:154756391
TEST=Dump ACPI table for trembyle and verify it didn't change.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idcda4356f4e6cb7f6066c67e8fabe0299a1a75b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43353
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is some boilerplate required to iterate over the USB supported
protocol structs. Encapsulate all the in a method to make the callers
simpler.
BUG=b:154756391
TEST=Built test trembyle.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I401f10d242638b0000ba697573856d765333dca0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43352
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Aligned initializers should be easier to read.
Change-Id: If9238177c4959d80444fc842fd83794bfdac5c4b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43130
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Michael Niewöhner
|
|
There's no generic way to tell whether a mainboard has an EC or not.
Making Kconfig symbols for these options seems overkill, too. So, just
put them on the devicetree. Also, drop unnecessary assignments when the
board's current value is zero, as the struct defaults to zero already.
Change-Id: If2ebac5fcab278c97dfaf8adc9d1e125888acafe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43129
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the Intel in-PCH GbE MAC is enabled in the devicetree, then tell MRC
to enable it as well. No one can ever forget to set this option anymore!
Change-Id: I946af36d16c94bb1a0f146604d0329fe6d6ce7e2
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43128
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
And use it instead of directly writing to the MRC struct.
Change-Id: I7f04db29a08512c1a8b2b2300dba71cb3b84a5c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43127
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Check the PCH's LPC device ID to know the system type instead of relying
on hardcoded numbers. The `get_pch_platform_type` function is MRC-safe.
Change-Id: Icfe7c2dccb7c7a178892ad3a2e34ca93b33b2bb9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43124
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current code only cares whether the PCH is LP or not. However, MRC wants
to differentiate between desktop and non-LP mobile platforms as well. As
the PCH is soldered onto the mainboard, add a facility to retrieve which
platform coreboot is running on by checking the PCH's LPC device ID. The
only user of the `pch_silicon_type` function is the `pch_is_lp` function
so replace the former with the new `get_pch_platform_type` function. The
function needs to be defined in both romstage and ramstage where PCI ops
have different signatures, hence the two copies.
Change-Id: Ib6276e0069eaa069a365faf6ae02dd934307d36c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43123
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This Kconfig symbol allows doubling the memory's refresh rate, assuming
that the MRC actually cares about it. It is disabled by default except
on the mainboards which explicitly enabled this setting in `pei_data`.
Change-Id: I6318dad0350d1c506c67f9d117d0ae8dad871281
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Several of these includes are no longer necessary. Get rid of them.
Since "raminit.h" already includes "pei_data.h", we can omit including
the latter for brevity's sake.
Change-Id: Ia7e9dadf87114ca9ea4761b89909ea035cdfc38a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43121
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All mainboards choose the maximum speed of DDR3-1600.
Change-Id: I8863f9d1df950b924f596689ebf1bfda5d317e06
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43120
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All mainboards have a non-zero SPD address to implemented DIMM slots.
Knowing this, it is possible to compute the MRC slot population masks
automatically instead of hardcoding the values on each mainboard.
Change-Id: Ia8f369dd1228d53d64471e48700e870e01e77837
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43119
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to redefine common settings.
Change-Id: I43922b2a1fdf90aa5004a43a17e9bc53337d88c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
There's no need to redefine common settings.
Change-Id: I4c6b65bce42b875bb55e8d04da44afe9c18fb6e5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
There's no need to redefine common settings.
Change-Id: I62f5014cf1fea093aee17023b48fd4d404279410
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
There's no need to redefine common settings.
Change-Id: If0cbc147791496bafc85831c1f88d3eb71b63350
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
There's no need to redefine common settings.
Change-Id: Iee5ca6188de4cea9393efb66baa089969353b4e6
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
There's no need to redefine common settings.
Change-Id: Ie4ced6efc8119afca070ce86634a3c31c6580d0f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
These settings are the same on all boards. Since the other boards
currently overwrite the struct contents, it doesn't make a difference.
To ease review, the same settings will be dropped from other boards in
separate commits, one board at a time.
Change-Id: I500b7a1d7d97c6976e0c7c10ca491d3875cae22b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
This is what sandybridge does, and if done properly allows factoring out
common settings. Said refactoring will be handled in subsequent commits.
Change-Id: I075eba1324a9e7cbd47e776b097eb940102ef4fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
The DxxIR (Device xx Interrupt Route) registers in RCBA are 16-bit wide,
so do not use 32-bit operations to program them.
Note that the DxxIP (Device xx Interrupt Pin) registers are 32-bit, so
using 32-bit operations on them is correct.
Change-Id: I9699b98d5fcd26b2c710bf018f16acc65dcb634e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
It only contains a pointer to another struct. Flatten it.
Change-Id: Iab427592c332646e032a768719fc380c5794086b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
|
|
Instead of using function pointers, we can use weak functions. So, drop
the pointer from `romstage_params`, leaving `pei_data` as the only
remaining member. This will be cleaned up in a follow-up commit.
Change-Id: I3b17d21ea7a650734119a5cab4892fcb158b589d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The current value of 0x1000 would overlap the first PCI bridge IO
window. As we commonly reserve IO range 0x0 .. 0x1000 for LPC and
integrated device use, change SMBUS_IO_BASE to 0x400. This is the
prevalent value among Intel southbridges, too.
Change-Id: I5c299f001f9012d6766b155a2f5def5cff6e88d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43023
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There's no need to use ugly preprocessor here when regular C conditional
statements will work just fine.
Change-Id: I5abd445a335b43fb95e4df087d44e82c3f44349b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43295
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
We only need ACPI for the PS/2 devices. Plus, the NCT6776 ACPI code
makes Windows BSOD with STOP 0xA5 (ACPI_BIOS_ERROR), which is bad.
Change-Id: I4cfad012684264b21284674e8e3713a5d8bb37be
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42430
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function is called at the end of `romstage_common`. Only one board
makes use of it, the Lenovo ThinkPad T440p. To preserve behavior, call
it after `romstage_common` has done nearly everything.
Change-Id: I35742879e737be4f383a0e36aecc6682fc9df058
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43094
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also remove an unneeded `pch_enable_lpc` function call.
Change-Id: I83158a655670d4e6cd91f6bf3332d1b6f9f655d1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Code has evolved such that there seems to be little
use for global definition of cbmem_top_chipset().
Even for AMD we had three different implementations.
Change-Id: I44805aa49eab526b940e57bd51cd1d9ae0377b4b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Get rid of duplicated "if" statement in imdr_create_empty().
Signed-off-by: Anna Karas <aka@semihalf.com>
Change-Id: I80c074d09f222086092478f8fd3ac665235ebb31
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I5e33526a02872c14e9fa37a485d2f93dea8b088f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43230
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
Nothing selects this driver. Drop it before it grows moss.
Change-Id: I4d0e678a8725c1fdf9263b9fae4e4fb6bb5ab4de
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43268
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: Icb98f3535f6c5f51081fc82262f6413f4b1a5733
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43261
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I2a244436adb8f41e4246aad7e3bfaf0986f2d832
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43260
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I14c575ac20cd94af1cfbb1204e2923149ef2920d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43259
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This code is not even being build-tested. Drop it before it grows moss.
Change-Id: I2a97954a36e5af37dc3c379c39afa24030daceea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
|
|
This provides the functionality to provide the GPE to the pci_xhci
driver.
BUG=b:154756391, b:160651028
TEST=Dump ACPI tables and verify GPE is set. Also dump SMI regs and
verify GPE is set. Resume using a USB keyboard.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ice7203831a1f65ed32f3a6392fe02c4b17d42617
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BUG=b:154756391
TEST=Dump ACPI table and see xHCI nodes being created.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1541dc8ebf314a204708a7767f30f4db72990907
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43331
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is now a generic xhci driver we can use to generate the xHCI ACPI
nodes.
BUG=b:154756391
TEST=Boot trembyle and look at ACPI table
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I3e9973dd416ccd51971f4d9410bed991eb7c3c41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41901
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We can use xhci_for_each_ext_cap to inspect the xHC so we generate the
correct number of device nodes.
Scope (\_SB.PCI0.PBRA)
{
Device (XHC1)
{
Name (_ADR, 0x0000000000000004) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake
{
0x1F,
0x03
})
Device (RHUB)
{
Name (_ADR, Zero) // _ADR: Address
Device (HS01)
{
Name (_ADR, 0x01) // _ADR: Address
}
Device (HS02)
{
Name (_ADR, 0x02) // _ADR: Address
}
Device (SS01)
{
Name (_ADR, 0x03) // _ADR: Address
}
}
Name (_S0W, Zero) // _S0W: S0 Device Wake State
Name (_S3W, 0x04) // _S3W: S3 Device Wake State
Name (_S4W, 0x04) // _S4W: S4 Device Wake State
}
}
BUG=b:154756391
TEST=Boot trembyle and look at ACPI table. See all xHCI nodes.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I44ebaef342e45923bc181ceebef882358d33f0d1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41900
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:154756391
TEST=Don't see build failure.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I36b81643c29ec1e7978d521206fbc366060ab286
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43330
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This matches the other methods.
BUG=b:154756391
TEST=Build trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6ba1fc5756c17da4dc1727425af17c4582c01a18
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|