summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2020-06-06src: Use pci_dev_ops_pci where applicableAngel Pons
Change-Id: Ie004a94a49fc8f53c370412bee1c3e7eacbf8beb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-06mb/asrock/b85m_pro4: Make VGA work on LinuxAngel Pons
Currently, having libgfxinit try to enable VGA will result in a hang. On the Asrock B85M Pro4, DDI E (VGA) was not being enabled in coreboot, so it did not hang. However, this renders Linux's i915 driver unable to use VGA at all. In absence of monitors with digital inputs, this is bad. To work around this problem, mark DDI E as enabled, and comment out VGA from gma-mainboard.ads for the time being. This allows one to use a VGA monitor, even if it only works after Linux drivers have taken over. Change-Id: Idd6a9e8515a1065ad3c6ddf136896fef9f0fa732 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner
2020-06-06mb/razer/blade_stealth_kbl: Remove duplicate ACPI power button devicePaul Menzel
The ASL code is copied from the Purism Librem 13v3, and is not needed, as the standard fixed power button is used. It was removed for the Pursim devices in commit 2d977b2dcb (mb/purism: remove duplicate ACPI power button). Change-Id: I18155ea672e7309b367ad4170f2f00f0b3e557db Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-06mb/51nb/x210: Remove duplicate ACPI power button devicePaul Menzel
This is copied from the Purism Librem 13v3, and is not needed, as the standard fixed power button is used. It was removed for the Pursim devices in commit 2d977b2dcb (mb/purism: remove duplicate ACPI power button). Change-Id: I8fe19b8fbcc11d859a75b3dc6b9bcc42c80d13f1 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rafael Send <flyingfishfinger@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-06amd/agesa/hudson boards: Get rid of power button devicePaul Menzel
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD AGESA Hudson boards. No idea, if this is correct for the two laptops. The Lenovo G505s also incorrectly defines two power buttons. [ 0.911423] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.911434] ACPI: Power Button [PWRB] [ 0.911493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.912326] ACPI: Power Button [PWRF] If the generic power button device is needed, the POWER_BUTTON flag should be set in FADT. The GPE ACPI code seems to originate from commit 806def8c (I missed the svn add on r3787. These are the additional files., Add AMD dbm690t ACPI support.), and was copied over. Change-Id: I88950e15faf1b90ca6e688864bac40bf9779c32e Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com>
2020-06-06amd/pi/hudson boards: Get rid of power button devicePaul Menzel
Port commit d7b88dcb (mb/google/x86-boards: Get rid of power button device in coreboot) to AMD AGESA Hudson boards (SOUTHBRIDGE_AMD_PI_AVALON). The GPE ACPI code seems to originate from commit 806def8c (I missed the svn add on r3787. These are the additional files., Add AMD dbm690t ACPI support.), and was copied over. Change-Id: Ibeec73c15f2282f7ab0be88f96693bcb551b3e45 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2020-06-06soc/amd/picasso: Add device operations for UART MMIO devicesFurquan Shaikh
This change adds device_operations for UART MMIO devices that provides following operations: 1. uart_acpi_name: Returns ACPI name of UART device. Generation of UART device node is not yet moved to SSDT, but will be done in follow-up CLs. 2. scan_bus: Uses scan_static_bus to scan devices added under the UART devices. This allows mainboard to add devices under the UART MMIO device. Change-Id: I18abbe88952e7006668657eb1d0c177e53e95850 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-06ec/google/wilco: Always use current value of battery status bitMathew King
According to the Wilco EC spec the BTSC bit of PWSR is always cleared when PWSR is read so that battery status change events are only triggered one time. Testing of the Wilco EC has verified this behavior. This changes the way in which the battery status change bit is used from checking the bit state against the previous value to always issuing a battery event when the BTSC bit is set. The other bits in PWSR indicate state directly and do not behave like the BTSC bit. BUG=b:157113138 TEST=Deploy on Drallion and verify that battery events are generated BRANCH=drallion, sarien Signed-off-by: Mathew King <mathewk@chromium.org> Change-Id: I8fbf2ee1158ddd790b04a20b1eb27a6cce4f5c81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42017 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2020-06-06src: Remove unused 'include <cpu/x86/mtrr.h>'Elyes HAOUAS
Change-Id: I3f08b9cc34582165785063580b3356135030f63e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Guckian
2020-06-06cpu/intel/haswell: Remove unused 'include <cpu/x86/bist.h>'Elyes HAOUAS
Change-Id: I5156eb97648927e5fe6e467abb8e3e055a231fec Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-06mb/intel/tglrvp: Add support for RT 1308Shaunak Saha
Add support for RT 1308 audio amplifier in TGLRVP. We are using the i2c generic driver here to generate the SSDT file. Datasheet:ALC-1308-CG-version-08. BUG=none BRANCH=none TEST=Build and boot tglrvp successfully. In kernel console use the "aplay -l" command to check soundcard is listed. Change-Id: I41d205a3ab87db85baf49e9e8a582c226ba5832d Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-06mb/google/octopus/variants/garg: Add G2Touch touchscreen supportTony Huang
BUG=b:156564296 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I99b04fec88da481e21b7a05807a4f1edeb3a5bdf Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2020-06-06soc/amd/picasso: Use MSR_CSTATE_ADDRESSRaul E Rangel
This is a standard MSR. No reason for picasso to define its own. BUG=b:147042464 TEST=Boot to OS on trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idcfae356d35ff08ced4b7e5ccfc132a8492a6824 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42087 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06soc/amd/picasso: Remove call to setup_bsp_ramtopRaul E Rangel
We don't use amd_setup_mtrrs, bsp_topmem or bsp_topmem2 in picasso. BUG=b:147042464 TEST=Boot to OS on trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1941934975dfea4f189347811b003a33996c887a Reviewed-on: https://review.coreboot.org/c/coreboot/+/42086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-06src: Remove unused '#include <cpu/x86/smm.h>'Elyes HAOUAS
Change-Id: I1632d03a7a73de3e3d3a83bf447480b0513873e7 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41685 Reviewed-by: David Guckian Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06drivers/pc80/rtc: Drop ARCH_X86 guard in headerKyösti Mälkki
Change-Id: I03c25ad5d9864406e1a021e39a5736ac72c8825a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38197 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06chromeos/cr50_enable_update.c: Modify recovery flow for cr50Edward O'Callaghan
Enable Cr50 update in recovery mode, so that we can at least still update the process for most cases (that an update is pending in recovery mode is not impossible but should be unlikely in the field). Leave manual recovery unaffected so at least that would still work even if Cr50 wedges in a weird way that it thinks it has an update on every boot or something. Setting the recovery_reason to VB2_RECOVERY_TRAIN_AND_REBOOT allows the update to be applied. BUG=b:154071064 BRANCH=none TEST=builds Thanks to Julius Werner for the suggested fix. Change-Id: Iba341a750cce8334da4dcf6353ca8cd1268d170f Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-06-06soc/intel/tigerlake: Add CPU ID for TGL B0Jamie Ryu
Reference: - TGL User Guide #613584 Rev 2.2 - TGL User Guide #605534 Rev 1.0 BRANCH=none BUG=none TEST=build and boot tglrvp Change-Id: I5da80fd4ad321b1ded369c2b6c039b73fcb3773e Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41516 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06sb/amd/cimx/sb800: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I779387fb0c9d3ad6e16d4ccfc39c38dfe6620345 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-06mb/google/dedede/var/wheelie: Add memory parts and generate DRAM IDsFurquan Shaikh
This change adds memory parts used by variant wheelie to mem_list_variant.txt and generates DRAM IDs allocated to these parts. BUG=b:157862308 Change-Id: I53f6f5c832cd40068a6d4379ace849f6e8ad7a91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41990 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Drop .spd.hex files from spd/Furquan Shaikh
Now that dedede is moved to using the auto-generated SPDs, we no longer need the .spd.hex files in spd/ folder. Hence, this change drops the files. Change-Id: I026b3c61a2a88a7cd2c9842a26eb336324853add Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41882 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Switch to using auto-generated SPDsFurquan Shaikh
This change switches dedede and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. Change-Id: I6fadae0abcfb6e50d3cc502098ace9b668667a51 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41881 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede: Drop selection of GENERIC_SPD_BINFurquan Shaikh
GENERIC_SPD_BIN assumes that the SPDs are all placed in mainboard and have .spd.hex as the suffix. Disable GENERIC_SPD_BIN for dedede as it already provides its own rules for SPD inclusion. In follow up changes, GENERIC_SPD_BIN can be re-enabled by updating gen_spd.go tool to use similar suffixes and allowing different paths to be provided for SPD by mainboard. Change-Id: If10144e0b2bd67884af69f60e5117e388a3ae5da Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42054 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/dedede/var/waddledoo: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledoo and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Waddledoo started assigning DRAM part IDs from 1. So, this change fills in Nanya part as ID 0 (though it is currently unused). Change-Id: I3879c4f3ad942eb349b52aad397333f576599bbd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/wheelie: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by wheelie and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Change-Id: If307bfb1d376e32af08af4f020f9e125f6a415dd Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/var/waddledee: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by waddledee and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all dedede variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: MT53E512M32D2NP-046 WT:E Byte# Current New Explanation 4 0x15 0x16 This part has only 1 die. Hence, density per die is 16Gb. 6 0x90 0x04 1 die in package and 2 channels per die. 9 0x40 0x00 Unused by MRC. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xFF as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Additionally, manufacturer name bytes are set to 0. Part: NT6AP256T32AV-J2 Byte# Current New Explanation 4 0x14 0x15 This part has only 1 die. Hence, density per die is 8Gb. 6 0x90 0x04 1 die in package and 2 channels per die. Manufacturer name bytes are set to 0. Change-Id: I7a68a29ca3632e22f3960c9fc44acf3ce4f87c9c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41878 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06lp4x: Add new memory parts and generate SPDsFurquan Shaikh
This change adds the following memory parts to LP4x global list and generates SPDs using gen_spd.go for TGL and JSL: 1. MT53E512M32D2NP-046 WT:E 2. K4U6E3S4AA-MGCR 3. H9HCNNNCPMMLXR-NEE 4. K4UBE3D4AA-MGCR BUG=b:157862308, b:157732528 Change-Id: Ib7538247d39dfe5faab277d646f87f09103d6969 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41989 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer: Drop spd/ folders from variants/Furquan Shaikh
Now that volteer is moved to using the auto-generated SPDs, we no longer need the spd/ folder under each variant. Hence, this change drops the spd/ folders and the SPD files within them. BUG=b:156126658 Change-Id: Icb36adeb11fd68a84df5b225db32fb8d840a530f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41619 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer: Switch to using auto-generated SPDsFurquan Shaikh
This change switches volteer and family to using auto-generated SPDs obtained using gen_spd.go and gen_part_id.go. BUG=b:147321551,b:155423877 Change-Id: I9ed48f0b51714b072a0459d0b70b5417a49db54f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/volteer/var/volteer: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by volteer and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. Part: K4UBE3D4AA-MGCL Byte# Current New Explanation 6 0xB5 0xB4 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. Part: H9HCNNNBKMMLXR-NEE Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: H9HCNNNFAMMLXR-NEE Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 6 0xF9 0xB8 This device has 4 logical dies instead of 8. Also, signal loading is not used by MRC. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 20,21, 0x92,0x55, 0x12,0x29, As per datasheet, part supports CAS 22 0x00 0x15 latencies 6,10,16,22,26,32,36,40. So value should be 0x12,0x29,0x15. 24 0x8C 0x96 taa is .468ns * CAS-40 which results in byte 24 being 0x96 as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x04C0. 123 0x00 0xE2 Fine offset for taa. Expected value is 0xE2 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G32D2NP-046 WT:A Byte# Current New Explanation 4 0x15 0x16 As per datasheet, density is 16Gb per logical channel. So value should be 0x16. 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB5 0x94 This device has 2 logical dies. Also, MRC does not use signal loading. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 12 0x0A 0x02 As per datasheet, this is 1rank and 16-bit wide channel. So, value should be 0x02. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 29,30 0xC0,0x08 0xE0,0x0B As per datasheet, this corresponds to 380ns in MTB units which is 0x0BE0. 31,32 0x60,0x04 0xF0,0x05 As per datasheet, this corresponds to 190ns in MTB units which is 0x05F0. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I3998b2cd91020130bacf371fce9b0d307304acbe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-06mb/google/volteer/var/halvor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by halvor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: H9HKNNNCRMBVAR-NEH Byte# Current New Explanation 4 0x16 0x15 As per datasheet, density is 8Gb per logical channel. So value should be 0x15. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels 2 dies. Hence, 0x94 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 29,30 0xE0,0x0B 0xC0,0x08 As per datasheet, this corresponds to 280ns in MTB units which is 0x08C0. 31,32 0xF0,0x05 0x60,0x04 As per datasheet, this corresponds to 140ns in MTB units which is 0x0460. 125 0xE1 0xE0 Fine offset for tckMin. tckMin is calculated as (1/4267)*2 which comes out to be 0.46871. Some datasheets round this down to 0.468 and others round it up to 0.469. JEDEC spec uses 0.468. As per that, this value comes out to be 0xE0. Part: MT53E1G64D4SQ-046 WT:A Byte# Current New Explanation 5 0x21 0x29 As per datasheet, this part has 17row address bits and 10column address bits. This results in 0x29. 6 0xB9 0x94 Signal loading is not used by MRC. Set bits 1:0 to 00. 2 channels, 2 dies. Hence, 0x94. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:147321551,b:155423877 Change-Id: I28b065a00380516d8686279a92ef68b9f17e2f65 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41616 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/malefor: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by malefor and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: I8b8bdc55314f538aff4dd1944a0b745357744d8c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41615 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/google/volteer/var/ripto: Use auto-generated Makefile.inc using ↵Furquan Shaikh
gen_part_id.go This change adds mem_list_variant.txt that contains the list of memory parts used by ripto and Makefile.inc generated by gen_part_id.go using mem_list_variant.txt. In the final change of the series, all volteer variants will be switched from using the current SPDs to new auto-generated SPDs. Differences in auto-generated SPD from current SPD are as follows: Part: K4U6E3S4AA-MGCL Byte# Current New Explanation 6 0x95 0x94 Signal loading is not used by MRC. Bits 1:0 set to 0. 16 0x48 0x00 Signal loading is not used by MRC. Set to 0x00. 19 0x0F 0xFF As per JEDEC spec, tckMax should be 100ns. So, value should be 0xff as per datasheet. 21,22 0x55,0x00 0x54,0x05 As per datasheet, part supports CAS latencies 20,24,28,32,36. So value should be 0x54, 0x05. 24 0x8C 0x87 taa is .468ns * CAS-36 which results in byte 24 being 0x87 as per datasheet. 123 0x00 0xE5 Fine offset for taa. Expected value is 0xE5 as per datasheet. 124 0x7F 0x00 Fine offset for tckMax. Expected value is 0x00 as per datasheet. 125 0xE1 0xE0 Fine offset for tckMin. As per datasheet tckMin is 0.468ns. So, this comes out to be 0xE0. BUG=b:155239397,b:147321551 Change-Id: Ibb06443a5c7fd80915f66b806cdd7c3ae1275b05 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41614 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06soc/intel/jasperlake: Generate LP4x SPD files using gen_spd.goFurquan Shaikh
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to generate SPD files for currently known LP4x memory parts that can be used with JSL-based mainboards. Following files are added: 1. spd-*.hex: SPD files auto-generated by gen_spd.go 2. spd_manifest.generated.txt: Manifest file auto-generated by gen_spd.go Mainboards can use the SPD files from SoC directly when creating SPD binary to add to CBFS. Change-Id: Ic52506b809c66b9f7cf25a100a959d85c67addf2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41876 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06soc/intel/tigerlake: Generate LP4x SPD files using gen_spd.goFurquan Shaikh
This change uses gen_spd.go and global_lp4x_mem_parts.json.txt to generate SPD files for currently known LP4x memory parts that can be used with TGL-based mainboards. Following files are added: 1. spd-*.hex: SPD files auto-generated by gen_spd.go 2. spd_manifest.generated.txt: Manifest file auto-generated by gen_spd.go Mainboards can use the SPD files from SoC directly when creating SPD binary to add to CBFS. BUG=b:147321551,b:155239397 Change-Id: Ic3935e4f6d106cbdf496fdfa28a0991e2d238fd9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-06-06mb/google/dedede/board_info.c: Clean upElyes HAOUAS
Remove unused includes Change-Id: I7e8109870168db7f477f205a0b3020b7b2be5f5f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41541 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06arch/x86: Declare permanent_smi_handler()Kyösti Mälkki
Advertising SMI triggers in FADT is only valid if we exit with SMI installed. There has been some experiments to delay SMM installation to OS, yet there are new platforms that allow some configuration access only to be done inside SMM. Splitting static HAVE_SMI_HANDLER variable helps to manage cases where SMM might be both installed and cleared prior to entering payload. Change-Id: Iad92c4a180524e15199633693446a087787ad3a2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-06soc,southbridge/intel: Control SMI related FADT entriesKyösti Mälkki
When no SMI is installed, FADT should not advertise a trigger mechanism that does not respond. Change-Id: Ifb4f99c11a72e75ec20b9faaf62aed5546de91fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41909 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/emulation/qemu-q35: Control SMI related FADT entriesKyösti Mälkki
If running on older (like before 2.4.0) version of QEMU there is no SMI support, so never advertise SMI in FADT for the emulation. Behaviour if ACPI daemon tries to raise SMI under these conditions is unknown. Change-Id: I170058793798648c6713de1530d89ec2ac53e39a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-06mb/lenovo/t400,x200: Control SMI related FADT entriesKyösti Mälkki
When no SMI is installed, FADT should not advertise a trigger mechanism that does not respond. Change-Id: Ia61e50fb49719e9e18e81a27f355cdbd755a3f40 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41906 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/roda/rk9: Control SMI related FADT entriesKyösti Mälkki
When no SMI is installed, FADT should not advertise a trigger mechanism that does not respond. Change-Id: Iefa1e7d80367dbe380f69e768238b4124a45626f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41905 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-06mb/prodrive/hermes: Add new mainboard portChristian Walter
This patch adds support for the Prodrive Hermes mainboard. Tested with CoffeeLakeFspBinPkg FSP 7.0.68.41. Untested: * CNVi * Intel Graphics Tested: * CPU Intel Xeon E2288G * CPU Intel Core i3-9100F * CPU Intel Core i7 9700KF * CPU Intel Core i7 9700E * CPU Intel Core i7 9700F * CPU Intel Core i5 9600K * CPU Intel Pentium Gold G5400 * PCIe Link Width x8 on Slot6 by changing PCIe mux * All four DDR4 slots in different configurations * USB2.0 HDR1 * USB2.0 HDR2 * USB3.0 HDR * Slot1 * Slot2 * Slot3 * Slot4 * Slot6 * M2.M NVMEe * Ethernet PHYs 0-4 * Aspeed BMC PCIe * Aspeed BMC USB * Aspeed Graphics init * USB3 backplane all working * I801 SMBUS Not Working: * Intel HDA Change-Id: Id7d051d3fa6823618691d5572087c9ae589c2862 Signed-off-by: Christian Walter <christian.walter@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-06soc/intel/xeon_sp/cpx: set up cpusJonathan Zhang
Set up cpus: * setup apic IDs. * setup MSR to enable fast string, speed step, etc. * Enable turbo Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: I5765e98151f6ceebaabccc06db63d5911caf7ce8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-05google/trogdor: Remove RO_FSG regionJulius Werner
We decided to store the FSG on eMMC instead of SPI flash, so we don't need this region anymore. Getting rid of it allows us to put more space into CBFS (to store hi-res bitmaps). Also grow VPD by some remaining amount to keep the FMAP alignment reasonable. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: If73450b65718affae71b6ada70ded5c5f45cfb4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com>
2020-06-05soc/amd/common/spi: add and use define for last FIFO positionFelix Held
The existing define for SPI_FIFO_DEPTH looked a bit suspicious, but turned out to be correct. Change-Id: I91e65d922673f5c451a336ae013cb75f87a3fc98 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42076 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-05soc/amd/picasso: Add set_mmio_dev_ops() to set ops for MMIO devicesFurquan Shaikh
This change adds a helper function set_mmio_dev_ops() in chip.c which is used for setting the dev->ops for MMIO devices based on the comparison of MMIO address in device tree to the pre-defined base addresses in iomap.h. Call to i2c_acpi_name() is replaced with set_mmio_dev_ops and scope of i2c_acpi_name is restricted to i2c.c since it is not required to be exposed out of that file. Change-Id: I31f96cfe8267b0df37012baeb7cfcaec9c2280f6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-05sb/intel/bd82x6x: Remove dead codeAngel Pons
Drop functions that are not being used. Change-Id: If406601f3bb7a98a621c1339b2f3413a43b8cc9f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-04Revert "mb/google/zork: Increase RO section to 5MB"Raul E Rangel
This reverts commit fddd101904188193197be10c8eae04e76386299b. Reason for revert: With FSP compression and non serial FSP we now have enough space in RO. Original change's description: > mb/google/zork: Increase RO section to 5MB > > The current size is too small to fit all the depthcharge assets. > Increasing it to 5MB gives us 648k of free space. > > $ cbfstool /build/zork/firmware/image-trembyle.serial.bin print -r COREBOOT > FMAP REGION: COREBOOT > Name Offset Type Size Comp > cbfs master header 0x0 cbfs header 32 none > fallback/romstage 0x80 stage 524316 none > fallback/ramstage 0x80100 stage 96592 none > config 0x97ac0 raw 843 none > revision 0x97e80 raw 680 none > spd.bin 0x98180 spd 8192 none > etc/sdcard0 0x9a1c0 raw 8 none > locales 0x9a200 raw 141 LZMA (166 decompressed) > (empty) 0x9a300 null 3224 none > fspm.bin 0x9afc0 fsp 720896 none > (empty) 0x14b000 null 3992 none > fsps.bin 0x14bfc0 fsp 327680 none > pci1002,15d8,c1.rom 0x19c000 optionrom 54272 none > pci1002,15d8,c4.rom 0x1a9480 optionrom 54272 none > fallback/dsdt.aml 0x1b6900 raw 12727 none > locale_hi.bin 0x1b9b00 raw 10441 LZMA (239928 decompressed) > ... > locale_ko.bin 0x254f80 raw 11282 LZMA (231168 decompressed) > fallback/payload 0x257c00 simple elf 95169 none > (empty) 0x26f000 null 245656 none > apu/amdfw 0x2aafc0 raw 1277440 none > (empty) 0x3e2e00 null 688472 none > bootblock 0x48af80 bootblock 64 none > > BUG=b:130028876 > BRANCH=none > TEST=Built image with depthcharge and booted. > > Change-Id: I9cd2902404ef68cdbd4a9484d5cb1ee9cba3efd1 > Signed-off-by: Raul E Rangel <rrangel@chromium.org> > Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2042850 > Reviewed-by: Martin Roth <martinroth@google.com> BUG=b:130028876, b:150746858 BRANCH=none TEST=emerge-zork coreboot-zork chromeos-bootimage and boot trembyle localhost ~ # flashrom -p host -r /tmp/main.bin flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) Calibrating delay loop... OK. coreboot table found at 0xcbe54000. Reading flash... SUCCESS localhost ~ # futility dump_fmap /tmp/main.bin | grep WP_RO -B 3 area: 22 area_offset: 0x00c00000 area_size: 0x00400000 (4194304) area_name: WP_RO localhost ~ # flashrom -p host --wp-range 0xc00000 0x400000 --wp-enable flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) coreboot table found at 0xcbe54000. SUCCESS localhost ~ # flashrom -p host --wp-status flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) flashrom v0.9.9 : 1e0291b4 : Apr 16 2020 06:13:41 UTC on Linux 5.4.39 (x86_64) coreboot table found at 0xcbe54000. WP: status: 0x0094 WP: status.srp0: 1 WP: status.srp1: 0 WP: write protect is enabled. WP: write protect range: start=0x00c00000, len=0x00400000 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5df10ee8e855adfaaf4b2fac4c2c47037ec093b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-04drivers/uart/acpi: Add new device driver for UART attached devicesDuncan Laurie
This driver generates an ACPI device object for a UART attached device with all of the expected device support handlers like different interrupt sources and power control GPIOs. Example use: chip drivers/uart/acpi register "name" = ""UDEV"" register "desc" = ""UART Attached Device"" register "hid" = "ACPI_DT_NAMESPACE_HID" register "compat_string" = ""google,cros-ec-uart"" register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW_WAKE(GPP_C20)" register "uart" = "ACPI_UART_RAW_DEVICE(115200, 64)" device generic 0 on end end Resulting in this ACPI device: Device (UDEV) { Name (_HID, "PRP0001") Name (_UID, Zero) Name (_DDN, "UART Attached Device") Method (_STA, 0, NotSerialized) { Return (0x0F) } Name (_CRS, ResourceTemplate () { UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.PCI0.UAR2", 0x00, ResourceConsumer, , Exclusive) GpioInt (Level, ActiveLow, ExclusiveAndWake, PullDefault, 0x0000, "\\_SB.PCI0.GPIO", 0x00, ResourceConsumer) { 0x0114 } }) Name (_DSD, Package (0x02) { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package (0x01) { Package (0x02) { "compatible", "google,cros-ec-uart" } } }) } Change-Id: Idfd2d9d2ab6990a82ddd401734c0d9b1b0b8f82d Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-06-04acpi: Add support for writing UART device descriptorsDuncan Laurie
This change adds support for generating the device descriptor that corresponds to the UARTSerialBusV2() ACPI macro. The resulting ACPI code for ACPI_UART_RAW_DEVICE(115200, 64) is: UartSerialBusV2 (0x0001C200, DataBitsEight, StopBitsOne, 0x00, LittleEndian, ParityTypeNone, FlowControlNone, 0x0040, 0x0040, "\\_SB.PCI0.UAR2", 0x00, ResourceConsumer, , Exclusive) Change-Id: I671ce2a499d74717d8677528c46ab3fbc1d7faf5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41792 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-04acpi: Accomodate non-standard UUIDs in device propertiesDuncan Laurie
There have been changes to the way device properties are supported in Linux[1] and Windows[2] which add flexibilty: - non-standard UUIDs can be used instead of only ACPI_DP_UUID - support for multiple different packages within the _DSD that associate different properties with unique UUIDs. To handle this I extracted the part that does the write of UUID and properties to a separate function and defined a new PACKAGE type which has the custom UUID as a name and can be used the same way that child properties are today. For example a PCIe root port for a USB4 port has a standard property indicating the USB4 reference, and then two custom properties which are defined for different attributes. Example code: /* Create property table */ acpi_dp *dsd = acpi_dp_new_table("_DSD"); acpi_dp_add_reference(dsd, "usb4-port", usb4_path); /* Add package for hotplug */ acpi_dp *pkg = acpi_dp_new_table("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"); acpi_dp_add_integer(pkg, "HotPlugSupportInD3", 1); acpi_dp_add_package(dsd, pkg); /* Add package for external port info */ pkg = acpi_dp_new_table("efcc06cc-73ac-4bc3-bff0-76143807c389"); acpi_dp_add_integer(pkg, "ExternalFacingPort", 1); acpi_dp_add_package(dsd, pkg); /* Write all properties */ acpi_dp_write(dsd); Resulting ACPI: Scope (\_SB.PCI0.TRP0) { Name (_DSD, Package () { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") Package () { Package () { "usb4-port", \_SB.PCI0.TDM0.RHUB.PRTA } }, ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () { "HotPlugSupportInD3", One } }, ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () { "ExternalFacingPort", One }, } }) } [1] https://patchwork.kernel.org/patch/10599675/ [2] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports Change-Id: I75f47825bf4ffc5e9e92af2c45790d1b5945576e Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42047 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-04mb/google/volteer: Create voxel variantDavid Wu
Create the voxel variant of the volteer reference board BUG=b:157879197 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOXEL Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I8ba5412be211730db84675927c500238cb20ff3d Reviewed-on: https://review.coreboot.org/c/coreboot/+/41968 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-06-04cpu/intel/slot_1: Select 16KiB bootblock if console is enabledKeith Hui
We previously confirmed [1] that bootblock will grow beyond current 8KiB size if console is enabled. Automatically change to 16KiB if user enabled it in menuconfig. [1] https://review.coreboot.org/c/coreboot/+/36775 Change-Id: Ic9988c77cf9677167a382aa4dc7dcfa2bc4cbe02 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41460 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-04mb/google/zork: create new variant for VilbozPeichao Wang
BUG=b:157499341 BRANCH=NONE TEST=FW_NAME="vilboz" emerge-zork coreboot Signed-off-by: peichao.wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I28ab3edb130fc7bf8b786141bc088166052d4868 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41801 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-04soc/amd/picasso/Makefile: Allow absolute path for picasso firmwareRaul E Rangel
If AMD_PUBKEY_FILE contains an absolute path the resulting path is incorrect since it contains $(top). BUG=b:147042464 TEST=Build trembyle with absolute and relative path. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ib46b1799fad5588a18411f8c32541192d699cdd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-04soc/intel/xeon_sp/cpx: add chip operation and PCIe enumerationJonathan Zhang
Add PCIe enumeration and resource assignment/allocation. Xeon-SP processor family has split IIO design, where PCIe domain 0 is split into multiple stacks. Each stack has its own resource ranges (eg. IO resource, mem32 resource, mem64 resource). The stack itself is not PCIe device, it does not have config space to be probed/programmed. The stack is programmed by FSP. coreboot needs to take into account of stack when doing PCIe enumeration and resource allocation. Current coreboot PCIe resource allocator does not support the concept of split IIO stack, thus entire support is done locally in this patch. In near future, improvements will be done, first generalize for xeon-sp, then generalize for coreboot PCIe device code. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: If461b1dc1f313d98b676dc9e91d08a1dbb9cb388 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-06-04soc/amd/picasso: fix iomap for ACPI_PMKangheui Won
offsets for ACPI_PM are incorrectly configured for picasso SoC. Especially incorrect ACPI_PM_TMR_BLK makes kernel to spend 10 sec for trying to testing it on wrong address. Fix them to correct offset with hack for GPE0_BLK. BUG=b:147044624 TEST=build and boot on trembyle; PM Timer error is gone Signed-off-by: Kangheui Won <khwon@chromium.org> Change-Id: I6adf71479c30f5b6751a21edc4bfa311ddbef5ec Reviewed-on: https://review.coreboot.org/c/coreboot/+/41128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-03mb/google/zork: Add HID for max98357aRaul E Rangel
The default HID was removed by a1c82c5ebee. We need to explicitly specify it. BUG=b:154756391 TEST=No longer see ERROR: _HID required message in console Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0083f98aea55ba262ac44b0018c9c1d2e12d9f8e Reviewed-on: https://review.coreboot.org/c/coreboot/+/42015 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-03drivers/generic/max98357a: Don't write device if HID is missingRaul E Rangel
If the device is missing the HID, the code would previously leave an open scope and device on the stack. BUG=b:154756391 TEST=Verify stack ACPI stack does not exceed limit on Trembyle. Fixes: a1c82c5ebee ("drivers/generic/max98357a: Allow custom _HID from config") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I798ed08ef0a0575def12937a66a7ce99f743e60d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03soc/amd: Use mp_cpu_bus_init()Kyösti Mälkki
Change-Id: Ia4508a9a087e3996ef7667280f8e2788421e5700 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41952 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-03soc,southbridge/amd: Remove some explicit zero-initializersKyösti Mälkki
Change-Id: I263c159fe4b7757dd5abfc0d6248e45b749df980 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-03mb/gigabyte/ga-g41m-es2l: Remove MEI PCI devices from devicetreeArthur Heymans
These devices never show on the PCI domain. Change-Id: I2d4d99c1e96c15dacb950aeb85b3e9a5d127c791 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-03mb/gigabyte/ga-g41m-es2l: Add PEG to devicetreeArthur Heymans
Change-Id: Icebf0eea4e1fee6d15ba3f1a080cbc40b42fd733 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41865 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-03soc/intel/quark/memmap: Add missing 'include <cpu/x86/mtrr.h>'Elyes HAOUAS
Change-Id: I6a066659758aeb0251d9b37f525ad987b90832db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41787 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03northbridge/intel/sandybridge: Mask lower 20 bits of TOLUD and TOLM in ↵Furquan Shaikh
hostbridge.asl Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: Ib0ffd9a332fa9590de63f8828d30daa710fe50db Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-03northbridge/intel/sandybridge: Update hostbridge.asl to ASL2.0 syntaxFurquan Shaikh
This change updates hostbridge.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for google/link. Change-Id: I5345ee22df7da92ee48c718f5bd748d7ea6155f2 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-03northbridge/intel/haswell: Mask lower 20 bits of TOLUD and TOLM in ↵Furquan Shaikh
hostbridge.asl Lower 20bits of TOLUD and TOLM registers include 19 reserved bits and 1 lock bit. If lock bit is set, then systemagent.asl would end up reporting the base address of low MMIO incorrectly i.e. off by 1. This change masks the lower 20 bits of TOLUD and TOM registers when exposing it in the ACPI tables to ensure that the base address of low MMIO region is reported correctly. Change-Id: I1fb52a42e84130d973e0970024e263f443aa0b89 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-03northbridge/intel/haswell: Update hostbridge.asl to ASL2.0Furquan Shaikh
This change updates hostbridge.asl to use ASL2.0 syntax. This increases the readability of the ASL code. TEST=Verified using --timeless option to abuild that the resulting coreboot.rom is same as without the ASL2.0 syntax changes for google/beltino. Change-Id: I0ba2da441c7b398cc7f84a7ef7a5d233b0365cbe Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41976 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-03soc/intel/jasperlake: Update C-States infoRonak Kanabar
- Update C-States max latency values - Remove MSR programming for C-States latency BRANCH=None TEST=Boot to OS and check CState Latenecy >cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency} POLL C1_ACPI C2_ACPI C3_ACPI 0 1 253 1048 Change-Id: I05c0b5b31d1883f72ca94171aa1b536621e97449 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40902 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03soc/intel/icelake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: Ibe9752a3f09e8944f7fbcf385b83faae95a7cd9b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-03soc/tigerlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I1731313798a4aadcbc17808bfe02b50bf8bd41db Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03soc/intel/jasperlake: Fix 16-bit read/write PCI_COMMAND registerElyes HAOUAS
Change-Id: I78f091e0d3d17fcfc60cd54721b34d143cbe2d86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-03mb/aopen/dxplplusu: Control SMI related FADT entriesKyösti Mälkki
When no SMI is installed, FADT should not advertise a trigger mechanism that does not respond. Board does not support ACPI S4 or C-states or P-states. Change-Id: If83efb72e076d404468259e312a5afac625f04af Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-03Makefile: Drop HAVE_SMI_HANDLER test for smm-classKyösti Mälkki
Change-Id: Id0bb5266246dbd959c6497d7c411f908cc49318c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03mb/google/foster: Remove EC_GOOGLE_CHROMEEC stubsKyösti Mälkki
Board does not have ChromeEC. Change-Id: Id6ab2495d6e082fdcb71ec5162efde877d97ce22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41983 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03mb/google/cyan,intel/strago: Remove EC_GOOGLE_CHROMEEC testsKyösti Mälkki
Boards have unconditional select EC_GOOGLE_CHROMEEC. Change-Id: Id444c83fc40f908d2257e8ec2606f149722a9bde Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-03acpi: Drop typoed __ROMC__Kyösti Mälkki
Change-Id: I4fcec5bbc038a31565882631052ab07e38946e65 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-06-03mb/bap/ode_e21XX: Drop old commented KconfigsKyösti Mälkki
Change-Id: I56225c0a533e5f9e8294b7866a41c9a6c24a7f67 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-06-03mb/google/zork: Delete sb_fch.aslRaul E Rangel
This file is not used. BUG=b:154756391 TEST=Build trembyle and check that peripherals still work Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I721e295546aa75c9745a4836425b6e3e0067afaf Reviewed-on: https://review.coreboot.org/c/coreboot/+/41837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03soc/amd/picasso/acpi: Add missing eMMC deviceRaul E Rangel
BUG=b:154756391 TEST=Boot trembyle and see that /dev/mmcblk1 now exists Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ica83b78a7ab081d9eac9f5e267b2904dcde0b283 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41836 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03soc/amd/picasso/acpi: Remove hardcoded FCH IRQ numbersRaul E Rangel
Modify the FCH ACPI devices to query the PCI IRQ mapping registers for their current IRQ numbers. BUG=b:139429446, b:154756391 TEST=Boot trembyle and see that I2C and UART devices are finally functional. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8f2035f74240ead4089ff4d503dfbeb447cf8de4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03mb/google/hatch: Enable the CSE Lite SKU for Puff variantsV Sowmya
This patch enables enables the CSE Lite SKU for all the puff variant boards. BUG=b:143229683 TEST=Build and boot puff with CSE Lite SKU. Cq-Depend: chrome-internal:3046770 Change-Id: I0de6bca162b01870ca554ae97bc4a41cf66fef18 Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03mb/google/hatch: Modify the puff fmd files to support CSE Lite SKUV Sowmya
This patch modified the puff fmd files to support CSE Lite SKU. * Reduce the SI_ALL size to 3MiB since ME binary size is less than 2.5MiB. * Increase the FW_MAIN_A/B size to accommodate the ME_RW update binary with CSE Lite SKU. BUG=b:154561163 TEST=Build and boot puff with CSE Lite SKU. Cq-Depend: chrome-internal:3046770 Change-Id: I4d39a1bdeabf48fc740da67539f48a9ff72c442c Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41198 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03acpigen: Add some new helper functionsDuncan Laurie
These build on existing functions but use different object types in order to provide functions for upcoming changes: acpigen_write_return_op(): Return an operator. acpigen_write_if_lequal_op_op(): Check if 2 operands are equal. acpigen_get_package_op_element(): Read an element from a package into an operator. This one just provides the missing helper, the other 3 already exist: acpigen_get_tx_gpio: Read TX gpio state. Signed-off-by: Duncan Laurie <dlaurie@google.com> Change-Id: I1141fd132d6f09cf482f74e95308947cba2c5846 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41985 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3197Srinidhi N Kaushik
Update FSP headers for Tiger Lake platform generated based FSP version 3197, which includes below additional UPDs: FSPM: CmdMirror RMTBIT FSPS: SataPortsEnableDitoConfig BUG=b:157725468 BRANCH=none TEST=build and boot volteer Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I23d6baacc3d963b473280c7fdb1e5df950cd7ca8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41974 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-03mb/google/volteer/halvor: initialize gpio setting and update overridetree.cbFrank Wu
Based on schematic and gpio table of halvor, generate gpio setting and overridetree.cb for halvor. BUG=b:153680359 TEST=FW_NAME=halvor emerge-volteer coreboot chromeos-bootimage Verify that the image-halvor.bin is generated successfully. Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: Ic6bd018551be58945742d1a6e7f7c5560f218e40 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-03soc/intel/apollolake: Reinstate APL_SKIP_SET_POWER_LIMITSTim Wawrzynczak
The config option APL_SKIP_SET_POWER_LIMITS was accidentally left out during the set_power_limits refactor (SHA 2adb50d32e8). This patch reinstates the config option which will cause APL boards to not set any power limits. TEST=util/abuild/abuild -p none -t siemens/mc_apl1 -a Change-Id: Iec9f9f340d50a1212b6ef20c2c0e1b66385ae1b2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2020-06-03soc/intel/tigerlake: update elog to include CSME reset causesderek.huang
Call out the CSME-initiated bits from HPR_CAUSE0 register and update the elog to include reset causes Change-Id: I32ffb55ff2ad26ec4e7609c41fc65e021a327a14 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41026 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-06-03mb/google/deltaur: Change H1 I2C speed to FASTEric Lai
H1 is stable after HW rework. Connect +3.3V_ALW_PCH with +3.3V_PRIM. Therefore change I2C speed back to FAST. BUG=b:154885320 TEST=Check H1 I2C speed is 375kHz by scope. And no error message in cbmem and kernel log. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If58721039d90514a17f024e6b432f3a5226440e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2020-06-02soc/intel/common/{pch,sata}: Remove SATA common code driverSubrata Banik
Right now all FSP2.0 based IA platform doesn't need this driver anymore hence removing to avoid debug and maintenance effort. TEST=Verified booting from SATA on SPT/CNP/ICP/TGP PCH platforms. Change-Id: Ied3832b26ba1fdd4c30fafe8149689a01d302c3e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41674 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/intel/tglrvp: Enable TCSS xHCI, PCIe root ports and DMA controllersJohn Zhao
This explicitly enables TCSS xHCI, PCIe root ports and DMA controllers from TGL RVP platform devicetree setting. BUG=:b:146624360 TEST=Built and booted on TGL RVP. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I0111542eef253f469f679cdc4b81812438dff4ce Reviewed-on: https://review.coreboot.org/c/coreboot/+/41386 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
2020-06-02amd/microcode: Change equivalant ID width to 16bitZheng Bao
The definition of processor_rev_id in struct microcode is 16 bits. So we need to change the a series of parameters passing to 16 bits. Change-Id: Iacabee7e571bd37f3aca106d515d755969daf8f3 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-02mb/google/volteer/ripto: Add audio devices to the treeDuncan Laurie
The ripto board is still being used for testing so make sure it supports the same audio config as volteer. BUG=b:147462631 TEST=build ripto variant Change-Id: Iabeb73307418dc16b12fa60ad26923cd9f6e1f3a Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-06-02mb/google/volteer: Add firmware configuration probing for audioDuncan Laurie
For all of the audio devices in devicetree.cb add the probe matches that will determine if the device should be enabled or not based on the selected audio daughter board type. AUDIO=MAX98357_ALC5682I_I2S: enable max98357 and alc5628, disable others AUDIO=MAX98373_ALC5682I_I2S: enable max98373 and alc5682, disable others AUDIO=MAX98373_ALC5682_SNDW: enable soundwire devices, disable others BUG=b:147462631 TEST=test different device present in ACPI based on fw_config value: > AUDIO=NONE ectool cbi set 6 0x00000000 4 2 > AUDIO=MAX98357_ALC5682I_I2S ectool cbi set 6 0x00000100 4 2 > AUDIO=MAX98373_ALC5682I_I2S ectool cbi set 6 0x00000200 4 2 > AUDIO=MAX98373_ALC5682_SNDW ectool cbi set 6 0x00000300 4 2 Change-Id: I5492e8cddcff3ba01023b0daef02be3508d347b0 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41216 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Add firmware configuration tableDuncan Laurie
Add the current firmware configuration table for the volteer mainboard and define some actions based on probe results for audio: - When I2S options are selected disable the SoundWire GPIOs. - When SoundWire is enabled disable the I2S GPIOs. - When no audio is enabled disable all the GPIOs. BUG=b:147462631 TEST=Test that GPIOs are configured as expected based on the current value of the fw_config field in cbi. Change-Id: I179f8b6436be83a2b37911777764bd26a0d404b7 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41215 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02mb/google/volteer: Reorganize audio codecsDuncan Laurie
- Move all audio devices from baseboard to the volteer variant. - Add max98373 devices and enable the driver - Disable everything in FSP and let coreboot configure GPIOs. BUG=b:147462631 TEST=this change makes all audio devices show up in ACPI, so this was tested by ensuring that all audio devices are present in ACPI. Change-Id: Ic654ea52a549053622603aa8c81fb37577d4e011 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02fw_config: Add firmware configuration interfaceDuncan Laurie
This change introduces a new top-level interface for interacting with a bitmask providing firmware configuration information. This is motivated by Chromebook mainboards that need to support multiple different configurations at runtime with the same BIOS. In these devices the Embedded Controller provides a bitmask that can be broken down into different fields and each field can then be broken down into different options. The firmware configuration value could also be stored in CBFS and this interface will look in CBFS first to allow the Embedded Controller value to be overridden. The firmware configuration interface is intended to easily integrate into devicetree.cb and lead to less code duplication for new mainboards that make use of this feature. BUG=b:147462631 TEST=this provides a new interface that is tested in subsequent commits Change-Id: I1e889c235a81545e2ec0e3a34dfa750ac828a330 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-02cpu/x86/mtrr: add x86_setup_mtrrs_with_detect_no_above_4gb()Aaron Durbin
There's not a function that is the equivalent to x86_setup_mtrrs_with_detect() but not solving for above 4GiB. Provide x86_setup_mtrrs_with_detect_no_above_4gb() which is the equivalent to x86_setup_mtrrs_with_detect() but instructs the MTRR solver to not take into account memory above 4GiB. BUG=b:155426691 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ia1b5d67d6f139aaa929e03ddbc394d57dfb949e0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41897 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02arch/x86/postcar_loader: utilize var_mtrr_context APIAaron Durbin
Now that there is a generic solution in mtrr subsystem utilize the API. BUG=b:155426691,b:155322763 Change-Id: Ie349d5669808928c7470c99d25c57c784174b4e9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41850 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-02cpu/x86/mtrr: add helper for setting multiple MTRRsAaron Durbin
Introduce concept of var_mtrr_context object for tracking and assigning MTRR values. The algorithm is lifted from postcar_loader code, but it's generalized for different type of users: setting MSRs explicitly or deferring to a particular caller's desired actions. BUG=b:155426691,b:155322763 Change-Id: Ic03b4b617196f04071093bbba4cf28d23fa482d8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 09:22:37 +0000