| Age | Commit message (Collapse) | Author |
|---|
|
Now that the save state size is handled properly inside the smm_loader
there is no reason to make that distinction in the mp_init code anymore.
Change-Id: Ia0002a33b6d0f792d8d78cf625fd7e830e3e50fc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code was hard to read as it did too much and had a lot of state
to keep track of.
It also looks like the staggered entry points were first copied and
only later the parameters of the first stub were filled in. This
means that only the BSP stub is actually jumping to the permanent
smihandler. On the APs the stub would jump to wherever c_handler
happens to point to, which is likely 0. This effectively means that on
APs it's likely easy to have arbitrary code execution in SMM which is a
security problem.
Change-Id: I42ef9d6a30f3039f25e2cde975086a1365ca4182
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
We don't want to keep track of the real smm size all the time.
As a bonus now ss_start is now really the start of the save state
instead of top - MAX(stub_size, save state size).
Change-Id: I0981022e6c0df110d4a342ff06b1a3332911e2b7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This code is much easier to read if one does not have to keep track of
mutable variables.
This also fixes the alignment code on the TSEG smihandler setup code.
It was aligning the code upwards instead of downwards which would cause
it to encroach a part of the save state.
Change-Id: I310a232ced2ab15064bff99a39a26f745239f6b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63475
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This is a duplicate of code_start.
Change-Id: I38e8905e3ed940fb34280c939d6f2f1fce8480a7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This code was very hard to read so rewrite it using as few mutable local
variables as possible.
Tested on qemu with 128 cores.
Change-Id: I7a455ba45a1c92533a8ecfd1aeecf34b4a63e409
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
| MLB DB | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ibd36fb961de9e9af9da1fd885eeb958c833d38bd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A | MLB DB | A
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia66c6fafe08110b8d8f9a138a2516ae03f8e1809
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
A | MLB DB | A
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Icd56c650a03c5db6e1e68e4ca4c9f0c068a7a430
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB |
A | |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia493fd28c362d2c0c343c2d121f6611cfd8f7f6c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C0 | | C1
| | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I840b0f363a1ff304b310505efdaba2ac1cd10472
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | C1
| MLB DB | A0
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ie4f96e3636a8b519923fdba7f9bd07d7a3e1d7ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
A | | A
C0 | MLB DB | C2
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: Ia1e95aba2f7d02131b0b0cdd6c7211a23e355084
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch is to denote the correct value of ACPI _PLD for USB ports.
+----------------+
| |
| Screen |
| |
+----------------+
C2 | | A0
C0 | MLB DB | C1
| |
+----------------+
BUG=b:216490477
TEST=emerge-brya coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I68fb940825bfcf7c77ca3015372025e47e7fcc41
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I245af182da5fe0869e834423959e1d040724157a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit
(TCC) activation feature as mentioned in doc #572349.
BUG=b:229804441
BRANCH=None
TEST=Build FW and test on Nivviks board
Change-Id: Ie9533936eccbabcc9a873adcb622bb490928c9e3
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now that the FSP provides the ALIB ACPI table via a HOB, the PNOT power
notify method can call WAL1 which will then call ALIB to communicate the
current AC/DC state to the SMU.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic966b73aa28f329207f8d840ca5fb5f2bf6ec9b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64667
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skyrim uses the Ti50 GSC and the config should be updated to
reflect that.
BUG=b:233750667
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I5d4af19ab2dda35ab687a0659898d79b08c4de97
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Enable the USB port that is used by the Bluetooth interface on the CNVI.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I2a330618c5f1c5fd5e3147cb6307c157b28070ac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64545
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the Webcam USB port form the devicetree and handle it solely in
devtree, which will enable or disable it based on the CMOS option.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9c89c7103aca5c3d42215122e9d94c83947b6fee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Add Q60 and Q61 events to disable or enable the trackpad. The
support for this Q event was added in Star Labs EC version 1.11
Add Q events Q60 and Q61 which are bound to the F10 key. The event
is select based on the value of 0x14, 0x11 will send Q60 and 0x22
will send Q61. Q60 will pull GPIO_177 to low, consequently disabling
the trackpad and Q61 will reset it to the default configuration.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I091b0eb268d4d6d2109559765be71e2746b85f54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Set tcc_offset value based on the power_profile value, ranging from 5
to 15 degrees.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Id30bec9c095517884a7361226aed703b370f2207
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Under the current watchdog setting, the system will not reboot when the
temperature is too high. To enable thermal hardware reset, we need to
enable thermal control request and set it to reboot mode.
Note that because thermal throttle (by lowering cpu frequency) is
currently enabled, the thermal hardware reset shouldn't be triggered
under normal circumstances.
This feature is only for new hardware structure for thermal. Therefore,
we only need to apply it on MT8192/MT8195/MT8186.
This setting is based on thermal and watchdog section of MT8192
Function Specification.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I98b062c2070384527624c3bcf0dfded25a2c8ce4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64676
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Under the current watchdog setting, the system will not reboot when the
temperature is too high. To enable thermal hardware reset, we need to
enable thermal control request and set it to reboot mode.
Note that because thermal throttle (by lowering cpu frequency) is
currently enabled, the thermal hardware reset shouldn't be triggered
under normal circumstances.
This feature is only for new hardware structure for thermal. Therefore,
we only need to apply it on MT8192/MT8195/MT8186.
This setting is based on thermal and watchdog section of MT8195
Function Specification.
BUG=none
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia6489bb953d148a43af173454d6f2b3e2a1dfcf9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64675
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Under the current watchdog setting, the system will not reboot when the
temperature is too high. To enable thermal hardware reset, we need to
enable thermal control request and set it to reboot mode.
Note that because thermal throttle (by lowering cpu frequency) is
currently enabled, the thermal hardware reset shouldn't be triggered
under normal circumstances.
This feature is only for new hardware structure for thermal. Therefore,
we only need to apply it on MT8192/MT8195/MT8186.
This setting is based on thermal and watchdog section of MT8186
Function Specification.
BUG=none
TEST=emerge-corsola coreboot
TEST=thermal hardware reset is working.
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Change-Id: Id2ed55e6d4f4eec450bf7c849f726a389eeb6694
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64659
Reviewed-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are zero-initialized arrays within AGESA that were previously not
declared with CONST qualifier. Without this flag, such arrays would have
consumed valuable CAR space in romstage.
After adding CONST qualifiers these arrays have actually moved to
.rodata and removing the flag does not add anything to .bss.
TEST: see that BUILD_TIMELESS=1 results in the same binary.
Change-Id: I5b91deb1bf1b64bd9c88dc311db4e0b36df86c18
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Now that all AGESA codebases have been fixed to not use the .data
section, the warning workaround can be disabled.
Change-Id: I675d169a5d2f16e1e9ae05f95e045e9ef3d12208
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: Ie8817434ee0bc6c195eabe090f195512c0043ae5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64400
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: I657d09f05070f5a88a4a162872c961db869a8df3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
AGESA has a lot of code in the .data section which is for initialized
data, that in fact should be .rodata. This adds the 'CONST' keyword
everywhere it is needed.
TEST: See in the .elf file (e.g. using readelf) that there is nothing in
.data section.
Change-Id: I9593c24f764319f66a64715d91175f64edf10608
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=b:207333035
BRANCH=none
TEST=built and verified speaker
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Change-Id: I0dd39760dc5f44f46838c07d2e52946edc2a6d7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64638
Reviewed-by: Vitaly Rodionov <vitaly.rodionov@cirrus.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The baseboard uses port USB2 #9, and USB3 #1, but vell does not,
therefore set the port configuration to EMPTY.
Change-Id: I0d03b967fd2a051205ad5807f0bd8916bad7c036
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The PMC is accessed via sideband registers, so the PCI device is not
needed.
Disabling it solves a bug where the laptop cannot be powered on
without the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I78f4aa4567dfc154ef5cb21f8746265259cd53e0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64451
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPTF is not used, so disable the corresponding PCI device.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I9e4a3bada13dcabc1af3e1e5b3c215939f8239fc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Remove the subsystem device ID for HDA devices, so that the correct
Intel [8086:xxxx] is used. This was an old workaround for Windows
that is no longer required with a new driver.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I63d6a4b0f19d400d683cab5dacca787d6c6a0fdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Set S3 assertion time to 28000us as this is sufficient time for
rails to discharge.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I4a14e7b30bb1fc4c0c1d3ff2f75069863458487f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64447
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The USB ports use both OC0 and OC1. Whilst they work perfectly with
OC_SKIP, set them to the correct pins.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If173b443d9770083d76519b854b513d8e47b9e71
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The OC pin was set to 0, which isn't connected. All USB ports are
connected to OC1.
This solves a strange issue where the Lite can't be powered on without
the charger connected.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I700ddde291f0e4be6e3787e2da13f6d3ece736b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Based on the constraints for CML.
Fixes the following warnings in Linux on system76/oryp8 and
system76/gaze16, which have an NVIDIA GPU on the bridge.
pcieport 0000:00:01.0: can't derive routing for PCI INT A
pcieport 0000:00:01.0: can't derive routing for PCI INT B
This, in turn, resolves an IRQ conflict with the PCH HDA device that
would cause a stack trace on every boot and on S3 suspend.
irq 10: nobody cared (try booting with the "irqpoll" option)
<snip>
[<00000000fb84c354>] azx_interrupt [snd_hda_codec]
Disabling IRQ #10
Change-Id: Ibc968aaa7bf0259879097ff69d2543dcfa2e5e4b
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Correct empty tcss port to meet Moli's schematic design.
BUG=b:233834605
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Id16744655010e246c8ca8d1050f71a6c6c63d2a7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable SaGv support for Banshee
BUG=b:233930777, b:233703655
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=banshee emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I22810f422e3f1d6dd1f64d93e6d7aff5593ff739
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
In the last coreboot leadership meeting, the doxygen documentation was
declared to be dead. Remove it.
Doxygen style comments can still be added to files, and we may generate
doxygen based documentation, but it won't be for the entire project, but
instead just for those individual areas where it is being maintained.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8983a20793786a18d2331763660842fea836aa2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64228
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
With CBFS verification, cbfstool (CB:41121) needs bootblock to be
present in coreboot.pre in order to locate the metadata hash stored in
it. Therefore we have to ensure that bootblock is added to CBFS before
other CBFS files are added.
To solve the problem, create the 'add_bootblock' function, and call it
in the coreboot.pre recipe. Because bootblock.bin is now a prerequisite
of coreboot.pre, it will get built even if CONFIG_BOOTBLOCK_IN_CBFS=n.
BUG=b:233263447
TEST=emerge-guybrush coreboot
TEST=emerge-corsola coreboot chromeos-bootimage
TEST=cbfstool image-kingler.bin print -v
TEST=Kingler booted successfully
BRANCH=none
Change-Id: I385deb8231e44310ee139c3f69f449e75b92b2be
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Change-Id: I520a936b4c3a8997ba2c6bea0126b3bbcc5d68ce
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the mainboard starlabs/laptop/tgl, since
it is obsolete now.
Change-Id: I49bbd4a776b4e6c55cb373bbf88a3ca076342e3e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60545
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Select `HAVE_HYPERTHREADING` and hook up the hyper-threading setting
from the FSP to the option API so that related mainboards don't have to
do that. Unless otherwise configured (e.g. the CMOS setting or overriden
by the mainboard code), the value from the Kconfig setting
`FSP_HYPERTHREADING` is used.
Also, remove related code from the following mainboards, since it is
obsolete now.
* siemens/chili
* starlabs/laptop/cml
Change-Id: I173b87da5ce76549672c50ba30204cd77be8b82f
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move the Kconfig option `FSP_HYPERTHREADING` to common Intel Kconfig so
that it can be reused by other SoCs. Since not all SoCs support
hyperthreading, make it conditional on `HAVE_HYPERTHREADING`. SoCs
supporting hyperthreading need to select it so that `FSP_HYPERTHREADING`
is available.
Change-Id: I892d48b488cbf828057f0e9be9edc4352c58bbe7
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Moli has USBA port4 but Brask didn't use the port4,
so enable USBA port4 in moli.
BUG=b:232656163
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: I5308e3102ea9f0718802596a235c0a5cc42e30bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Add WiFi SAR table for mithrax.
BUG=b:231491014
TEST=emerge-brya chromeos-config chromeos-config-bsp-private
coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
and checked SAR table can load by WiFi driver.
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Change-Id: I847debd7c817225b5b1777c798a14ef10aee3471
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64541
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
|
|
On Guybrush, the power and lid switches are managed by the EC
and coreboot and the AP have no control over them within this
context. Remove unused GPIO's to prevent coreboot warnings
about resampling at boot.
BUG=b:233771033
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I1c68fce817a2a98ce0e8f1d9771d6c630dd5e88a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The HDMI port was specified as a display port. Update to allow
for testing of 4k streaming.
BUG=b:229771029
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ib4dc8a5c6110630cea768f81e34fd7b0a5a62657
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
On Skyrim, the power and lid switches are managed by the EC
and coreboot and the AP have no control over them within this
context. Remove unused GPIO's to prevent coreboot warnings
about resampling at boot.
BUG=b:233771163
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ie369bb7d430bd0dd1f1c1f41bf543a9b18e34db1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64644
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On Guybrush, there wasn't a need for a sleep GPIO table.
Remove the TODO and filler table and function to reduce
unnecessary function calls/overhead. Missed changes
to variant.h in initial commit(already merged)
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idba1a9eeea5ea5f5922281668ec17c4f065a654d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64643
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch skips sending DISCONNECT IPC command to PMC if system resumes
from S3.
coreboot notice DISCONNECT IPC command getting timedout during S3
resume if system has AC connected behind Type-C hub. This impacts
system resume time. Please refer TA# 730910 for more information.
coreboot need not send the DISCONNECT IPC command when system resumes
from S3 state.
TEST=Verified system boots to OS and verfied below tests on Gimble
1. coreboot doesn't send the DISCONNECT during S3 resume
2. After S3 resume, system detects the pen drive with Superspeed
3. After system resumes from S3, hot-plug the pen drive, system detects
the pen drive
3. System sends IPC commands when system boots from S0 or S5.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I6ad006ae8677919c7dfeca8eec0af11454a2e89d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63932
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In order to meet the OEM's acoustic specifications, the pre-wake
randomization time (DPA) is set to 100.
BUG=b:232892200
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I65e3fef581ee06fa049e831f246da1328a08518c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The FSP includes a UPD to set the DPA (Dynamic Periodicity
Alteration) PreWake value, which can be used to set the maximum
pre-wake randomization time in "micro-ticks". This patch adds
support for configuring that value.
BUG=b:228410327
TEST=build FW and checked DPA value by fsp log.
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I08897c590a88aba058cb9e364185ea0794e1e7c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3dfc5862fdcc663d9e0adbfda30c940d43b49b4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This patch drops the unused `PCH_DEV_SLOT_LPC` macro from the
Tiger Lake SoC PCI device list.
BUG=none
TEST=Able to build and boot volteer, google board.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I27a2f31aa706c4d76e9f0db202422bc129368959
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Separate and add LPDDR4X MT53E2G32D4NQ-046 WT:C support for burnet/esche
ID#1: MICRON - MT53E2G32D4NQ-046 WT:C
BUG=b:225121354
BRANCH=none
TEST=1. emerge-jacuzzi coreboot
2. power on test ok
Change-Id: If720d7bcf185c5c0149a82125ec068fc75e5b3cd
Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64069
Reviewed-by: Chen-Tsung Hsieh <chentsung@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SCP core 2 is enabled for MT8195 camera feature. It requires the same
register access permission as SCP core 1. Therefore, we configure the
same domain ID for both cores.
BRANCH=cherry
BUG=b:193814857
TEST=cherry boot ok
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Change-Id: Idf335593936b12c083c926a252fa99c3b76cda6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64575
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake
pin that interrupts the system in active operation when the stylus
is removed or inserted.
BUG=b:229938024
TEST=emerge-nissa coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id6ee977fbda3118229677aa76e5394f5592c3da8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64583
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
All targets now use cbmem for the BERT region, so the implementation can
be common.
This also drops the obsolete comment about the need to have bert in a
reserved region (cbmem gets fixed to be in a reserved region).
Change-Id: I6f33d9e05a02492a1c91fb7af94aadaa9acd2931
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64602
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I54b01b1974822c155cb49634fff8616326d55705
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Currently the BSP stack overflows into the next AP stack. This symbols
needs to be a power of 2 for alignment on the legacy smp init codepath.
This fixes cpu_info on AP #1 build being broken due to stack overflow.
Change-Id: Ib59d354beabc8877f09f768004ced22234ec7d72
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This removes the need to align BERT so that TSEG remains aligned.
Change-Id: I21b55a87838dcb4bd4099f051ba0a011a4d41eea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6c5b3f83b66a2d54611ada3cb97ddda4b655d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64606
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Chausie and Majolica boards use S0ix which is mutually exclusive
with S3, so don't select HAVE_ACPI_RESUME.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d1bf33ad017dfbf908e0a195949998668c8e137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64605
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do this for consistency, while followup will remove the index
completely.
Change-Id: I7b4822c3909801e91627ed2ffe776d65dfab08d5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add support for MB level dll tuning.
This patch sets the eMMC dll tuning parameters to default values needed.
There was issue observed on some eMMC devices which failed to boot in
HS400 mode.EV team suggested the intermediate eMMC dll tuning parameters
that needs to be set. We observed these values helped to fix the issue.
While we get the verified default values set from FSP directly, adding
it here to use it as the custom dll values needed.
BUG=b:230403441
TEST=Build and boot nivviks board. Verify the eMMC dll parameters are
overridden.
[INFO ] usha: After override dll_params
[INFO ] usha: emmc_tx_cmd_cntl=505
[INFO ] usha: emmc_tx_data_cntl1=909
[INFO ] usha: emmc_tx_data_cntl2=1c2a2828
[INFO ] usha: emmc_rx_cmd_data_cntl1=1c1b1d3c
[INFO ] usha: emmc_rx_cmd_data_cntl2=10049
[INFO ] usha: emmc_rx_strobe_cntl=11515
Signed-off-by: Usha P <usha.p@intel.com>
Change-Id: I27771b663ce9808e5a5ef4b36c136ad78f924376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Set custom_pld of each USB port (both Type A and C) with actual
physical location values.
BUG=b:214025396
TEST=Build and boot to Chrome OS
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ic84b9aae1501e36c2794382aabcf8225eef7783b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Won Chung <wonchung@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Since the FIT pointer is patched at runtime there is no guarantee that
the pre-defined one will match the patched one. Add a check and print a
warning at runtime if both addresses (pre-defined and patched) do not
match as in this case an offline computed hash for the bootblock will
differ from the runtime one.
Change-Id: Ib1b02ec43af183caa9f5b08b3c485879b423c40f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Before TXE releases the CPU out of reset a pointer to the constructed
FIT in SRAM is patched into the loaded bootblock at offset 4G - 64B.
Since this patched bootblock gets measured during runtime it will not
match the one that is potentially measured from the coreboot image.
This patch adds a dedicated fit.c file for Apollo Lake where the FIT
pointer is already set to the address TXE will be using at runtime.
Test=Compare sha256 sum from coreboot runtime and coreboot.rom of the
bootblock and make sure they match.
Change-Id: Ia0fd2a19517c70f50ef37e6a2dc2408bae28df10
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On Apollo Lake the bootblock is stitched into the IBBL IFWI region at
build time. At execution time TXE loads this IBBL into a shared SRAM
(which is read-only in this phase) and maps it at 4 GiB - 32 KiB. Then
the CPU starts to operate from this shared SRAM as it were flash space.
In order to provide a reliable CRTM init, the real executed bootblock
code needs to be measured into TPM if VBOOT is selected. This patch adds
the needed code to do this.
Change-Id: Ifb3f798de638a85029ebfe0d1b65770029297db3
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64493
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On platforms where the bootblock is not included in CBFS anymore
(because it is part of another firmware section (IFWI or a different
CBFS), the CRTM measurement fails.
This patch adds a new function to provide a way at SoC level to measure
the bootblock. Following patches will add functionality to retrieve the
bootblock from the SoC related location and measure it from there.
In this way the really executed code will be measured.
Change-Id: I6d0da1e95a9588eb5228f63151bb04bfccfcf04b
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64492
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove the stop pin declaration for LAN. Confirmed with LAN vendor,
8111K do not need to implement stop pin. It caused S0ix fail.
BUG=b:231400227
TEST=Build and suspend_stress_test -c 5 pass
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Iae33068c4622f91d5cebb867e4b10f3834ce8bd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64494
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
add USBC0_RETIMER into 2, 3 bits for usb retimer.
BUG=b:232486478
TEST=emerge-brask coreboot.
Signed-off-by: Raihow Shi <raihow_shi@wistron.corp-partner.google.com>
Change-Id: Idaf2e53387476d344d2c838a6e762f5a4c582989
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
This will replace LOG_{MEM/IO}_RESOURCE macros once
the new resource constructors are available.
Change-Id: I21b030dc42dcb8e462b29f49499be5fd31ea38f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add the boot flash MMIO window to the resources to report this region as
reserved to the OS. This is done to stay consistent with the reserved
memory ranges by coreboot and make the OS aware of them.
As x86 systems preserves the upper 16 MiB below 4G for BIOS flash
decoding use the complete window for reporting independent of the
actually used SPI flash size. This will block the preserved MMIO window.
Change-Id: Ib3a77e9233c3c63bad4de926670edb4545ceaddf
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64077
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Follow the Thermal_paramters_list-0520.xlsx to modify DPTF baseline PL1
values.
1. Modify baseline PL1 min_power from 15000 to 12000.
2. Modify baseline PL1 max_power from 17000 to 25000.
BUG=b:231380286
TEST=emerge-brask coreboot
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Ibd3098ee6bbf964cffddfcc9a4600cb7d81162d9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64595
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Ricky Chang <rickytlchang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nivviks
Add DPTF passive and critical policies for ADL-N Nivviks design.
Temperature threshold for triggering Passive Policy is set to 75C and Critical Policy is set to 85C respectively for TSR0/1.
BUG=b:224884901
BRANCH=None
TEST=Build FW and test on Nivviks board.
Verified thermal throttling successfully when participant reaches temp threshold as per Passive Policy.
Also, verified system shutdown when Temperature of participants are reaching threshold as per Critical policy.
Change-Id: I5c9b9e8c2489c7da501ca136e2aa6fbc764bf400
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64466
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BUG=b:224884901
BRANCH=None
TEST=Build FW and test on Nivviks board
Change-Id: I3f5e8dd3d2ff517e27b0b08a0173f094bc6043bd
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Set PCH TSN link speed to 1 Gbps and enable MultiVC for all TSN
ports.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8d43c3ba8f02645c8ad2993f76e610d838b0151a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64478
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Praveen HP <praveen.hodagatta.pranesh@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
All non x86 platforms use bootblock in FMAP (see Makefile.inc). Add a
build time check for that so that all the other possibilities (CBFS or
other places for the bootblock) are dropped at build time.
Change-Id: Ic18336a0b79b5d319c2cdfecb7e1eeb89d241206
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On some platforms the bootblock is not placed in cbfs, but embedded
inside another binary that loads in into DRAM/SRAM.
e8217b11f1 (Kconfig: Add an option to skip adding a cbfs bootblock on
x86) removed adding a cbfs file containing the bootblock in that case.
Change-Id: Id47ecedbc8713ebd5d9814f1c4faf43c52780447
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64418
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the kuldax variant of the brask reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:233380254
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_KULDAX
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I95c04768bbed8657d2858bcd66fc041f56910b8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
1. Add wifi sar table for volmar
2. Set EC_GOOGLE_CHROMEEC_INCLUDE_SSFC_IN_FW_CONFIG
BUG=b:233319626
TEST=emerge-brya coreboot-private-files-baseboard-brya coreboot chromeos-bootimage
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I09069bbc3a41b66ec9a88cfede46acc067209b01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Timestamp '2000-00-00 00:00:00' is considered as the invalid format.
Enable RTC to fix incorrect timestamp format in the eventlog.
BUG=b:232035991
TEST=check the timestamp field in /var/log/eventlog.txt
Change-Id: I8d9822075377734ef4a609ddeee79385fe7af0f0
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
|
|
This patch drops the unused `PCH_DEV_SLOT_LPC` macro from the
Alder Lake SoC PCI device list.
BUG=none
TEST=Able to build and boot taeko, google board.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib2ae40fcc4499de34534f27f03b4c359c37409e6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since the fast SPI controller is hidden on Apollo Lake the OS cannot
probe it and is therefore unaware of the reserved resources assigned in
coreboot. Select 'FAST_SPI_GENERATE_SSDT' to enable SSDT creation to
report the reserved resources to the OS.
Change-Id: I23e77a0a01141dc4f299988d19509e6df555a654
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Currently no smihandler uses heap.
coreboot's heap manager also is quite limited in what it will
free (only the latest alloc). This makes it a bad idea to use it inside
the smihandler, as depending on the alloc usage the heap might actually
be full at some point, breaking the smihandler.
This also reduces the ramstage by 448 bytes on google/vilboz.
Change-Id: I70cd822be17c1efe13c94a9dbd2e1038808b9c56
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64521
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Disable RAPL for all mainboards based on mc_ehl for stable real time
mode of CPUs.
Test: Boot mc_ehl1 with this patch and ensure the bits in the MCBAR
register are cleared.
Change-Id: Ie58a4b6444d5be088ac2b25ff0a2f5cd33120ace
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch provides the possibility for EHL based boards to disable
RAPL settings via SOC_INTEL_DISABLE_POWER_LIMITS config switch.
On Elkhart Lake the way via setting relevant MSR bits does not work.
Therefore the way via MCHBAR is choosen.
Test:
Check MCHBAR mapped registers (MCH_PKG_POWER_LIMIT) on mc_ehl1.
Change-Id: I5be6632b15ab8e14a21b5cd35152f82fec919d9f
Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The feature request was moved to Skyrim in the interest of time
and effort. The bug was updated to reflect this, and the comment
should be removed from the monkey island code base
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Id4ca43692aa56b6dba2f7acc1f924b30c1e966ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
On Guybrush, there wasn't a need for a sleep GPIO table.
Remove the TODO and filler table and function to reduce
unnecessary function calls/overhead.
BUG=b:232952508
TEST=Builds
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Ic51ee4845d663acf34f050f7b3abf57a7c247c88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The HD audio controller of the GPU on bus A device 0 function 1 wasn't
enabled, so it didn't get resources assigned. Enable it to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib9a4129ce594c5dd59f70e855fef5f2c04ebb9c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64554
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The ACP device on bus A device 0 function 5 wasn't enabled, so it didn't
get resources assigned. Enable the ACP device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifc9376314213e9d624756519f703d508411cb1bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64553
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The crypro device on bus A device 0 function 2 wasn't enabled, so it
didn't get resources assigned resulting in this the Linux kernel error:
[ 38.582036] pci 0000:04:00.2: attach allowed to drvr ccp [internal device]
[ 38.582064] ccp 0000:04:00.2: enabling device (0000 -> 0002)
[ 38.582175] ccp 0000:04:00.2: ioremap failed
[ 38.582178] ccp 0000:04:00.2: initialization failed
[ 38.582181] ccp: probe of 0000:04:00.2 failed with error -12
Enable the crypto device to fix this.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia812df6e59f3767dcbaa908fa620b62619590f85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64552
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are three external Marvell PHY 88E1512 on this mainboard. The PHY
IRQ comes with a falling edge but the EHL MAC side needs a rising edge
signal. For that reason, we need an inversion of the IRQ polarity.
Change-Id: Id3caf582b4434b046779f5733e6ad9b57528ce35
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63889
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
EHL MAC side expects a rising edge signal for an IRQ. Based on the
mainboard wiring it could be necessary to change the interrupt polarity.
This patch provides the functionality to invert a falling edge signal
that comes from an external PHY. The inverting can be activated via
devicetree parameter.
Change-Id: Ia314014c7cacbeb72629c773c8c0bb5f002a3f54
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63888
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Follow google stylus spec. The Stylus-Present GPIO MUST be a wake
pin that interrupts the system in active operation when the stylus
is removed or inserted.
BUG=b:233159811
TEST=EC wake event work as expected.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Icf609c647e19914684a93c89022f2cd4888a67ef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
