Age | Commit message (Expand) | Author |
2011-05-15 | Enable SPI cacheline prefetch early to reduce boot time. | Scott Duplichan |
2011-05-15 | Enable SPI cacheline prefetch early to reduce boot time. | Scott Duplichan |
2011-05-15 | Switch processor cores to pstate 0 early to reduce boot time. | Scott Duplichan |
2011-05-15 | Enable 33 MHz fast mode SPI read early to reduce boot time. | Scott Duplichan |
2011-05-15 | Build device paths for AP cores so that coreboot will report them to the OS. | Scott Duplichan |
2011-05-15 | Program the I/O APIC ID. | Scott Duplichan |
2011-05-15 | Enable AHCI mode and hide IDE controller to reduce boot time. | Scott Duplichan |
2011-05-15 | Move mmconf base from e0000000 to f8000000 to avoid conflict with UMA BAR. | Scott Duplichan |
2011-05-15 | Fix ACPI shutdown function by removing reliance on SMI. | Scott Duplichan |
2011-05-15 | Configure CIMx to use 33 MHz fast mode for SPD read. | Scott Duplichan |
2011-05-15 | Match DIMM SPD addressing to implemented slots. | Scott Duplichan |
2011-05-15 | Size mmconf according to CONFIG_MMCONF_BUS_NUMBER. | Scott Duplichan |
2011-05-15 | 1) Use D18F1xF4 VGA Enable to simplify legacy video I/O support. | Scott Duplichan |
2011-05-15 | 1) Set I/O APIC ID according to BKDG recommendation | Scott Duplichan |
2011-05-15 | Correct the number of MCA error reporting banks cleared. | Scott Duplichan |
2011-05-15 | 1) Initialize BSP fixed MTRRs to match AP fixed MTRR initialization. | Scott Duplichan |
2011-05-13 | siemens/sitemp_g1p1: Adapt read_option() to latest changes | Josef Kellermann |
2011-05-12 | Remove uart_init() in Siemens sitemp-g1p1 | Patrick Georgi |
2011-05-11 | Add Siemens SITEMP-G1 board | Josef Kellermann |
2011-05-11 | Work around unclean CMOS handling for now | Patrick Georgi |
2011-05-10 | Change read_option() to a macro that wraps some API uglyness | Patrick Georgi |
2011-05-10 | This replaces the fixed shift values in the apic timer init with macros. | Vikram Narayanan |
2011-05-09 | Adds RS740 HT and internal graphics PCI ids. | Ivaylo Valkov |
2011-05-07 | ADVANSUS A785E-I Mainboard support, Family10h ASB2, RS880(RS785E) + SB820 pla... | Kerry She |
2011-05-07 | RS780 DDI Lanes configure support, | Kerry She |
2011-05-07 | SB800 CIMX code can share the AGESA V5 lib code, | Kerry She |
2011-05-07 | 1. move _mm_clflush_fs() to __SSE3__ block, because __builtin_ia32_sfence() i... | Kerry She |
2011-05-07 | put the amdlib and agesa constant to .rodata segment. | Kerry She |
2011-05-05 | Adds VOID to empty parameter lists to get rid of some build warnings. | Frank Vibrans |
2011-05-05 | Remove AMD Agesa requirement for standard include files | Frank Vibrans |
2011-05-03 | Enable caching for ROM area in model_6ex/cache_as_ram.inc | Sven Schnelle |
2011-05-03 | i82801gx: enable SPI prefetching | Sven Schnelle |
2011-05-02 | Add option 'compress ramstage' | Sven Schnelle |
2011-04-28 | Thinkpad: Enable Battery events | Sven Schnelle |
2011-04-27 | X60: enable Ultrabay if device is plugged in | Sven Schnelle |
2011-04-27 | T60: enable Ultrabay if device is plugged in | Sven Schnelle |
2011-04-27 | Lenovo PMH7: add pmh7_ultrabay_power_enable() | Sven Schnelle |
2011-04-27 | Lenovo H8: add h8_ultrabay_device_present() | Sven Schnelle |
2011-04-26 | Add support for memory mapped UARTs to coreboot and add the OXPCIe952 as an | Stefan Reinauer |
2011-04-22 | Fix of fix copy and paste errors in ne2k.c (r6512 by stepan) | Rudolf Marek |
2011-04-22 | fix typo ttys0_index -> b_index | Stefan Reinauer |
2011-04-22 | Get rid of all but one (I/O mapped) UART init functions. | Stefan Reinauer |
2011-04-22 | The UART divider should be calculated based on the base frequency | Stefan Reinauer |
2011-04-21 | more ifdef -> if fixes. | Stefan Reinauer |
2011-04-21 | more ifdef -> if fixes | Stefan Reinauer |
2011-04-21 | some ifdef --> if fixes | Stefan Reinauer |
2011-04-20 | drop dead code from sb800 bootblock | Stefan Reinauer |
2011-04-20 | drop excessive newline in uart8250.c | Stefan Reinauer |
2011-04-20 | Simplify coreboot's console/console.h | Stefan Reinauer |
2011-04-20 | run uart_init() from console_init, just like the other console initialization... | Stefan Reinauer |
2011-04-20 | Add Lenovo ThinkPad T60 | Sven Schnelle |
2011-04-20 | PC87384: remove unused init function | Sven Schnelle |
2011-04-20 | pci1x2x: remove latency/bridge control/cacheline size settings | Sven Schnelle |
2011-04-20 | pci1x2x: use cardbus_read_resources()/cardbus_enable_resources() | Sven Schnelle |
2011-04-20 | pci1x2x: use pci_ops set_subsystem instead of custom code | Sven Schnelle |
2011-04-20 | pci1x2x: add PCI1510 device IDs | Sven Schnelle |
2011-04-20 | pci1x2x: use devicetree register configuration | Sven Schnelle |
2011-04-20 | drop dead uart init code. | Stefan Reinauer |
2011-04-20 | fix boards that still had some uart init remainders | Stefan Reinauer |
2011-04-19 | Drop baud rate init to an arbitrary baud rate from Super I/O code. ... | Stefan Reinauer |
2011-04-19 | Lenovo PMH7: add pmh7_touchpad_enable() | Sven Schnelle |
2011-04-19 | Fix compilation of all i82371eb boards when ACPI tables aren't generated | Idwer Vollering |
2011-04-19 | The "temp" will be used later. So it has to be calculated correctly. | Zheng Bao |
2011-04-19 | Recently the 3 projects using the new AMD reference code have been | Scott Duplichan |
2011-04-19 | Fix some more misuses of ifdef/if defined | Stefan Reinauer |
2011-04-19 | cleanup wrong use of defined() after exporting all variables in Kconfig | Stefan Reinauer |
2011-04-18 | * Set USBDEBUG_DEFAULT_PORT in all southbridges and use that value | Stefan Reinauer |
2011-04-18 | fix copy and paste errors in ne2k.c | Stefan Reinauer |
2011-04-17 | Lenovo H8 EC: add missing systemstatus.asl include | Sven Schnelle |
2011-04-17 | PMH7: Add dock event control | Sven Schnelle |
2011-04-16 | bootblock updates: ... | Stefan Reinauer |
2011-04-15 | sorry for breaking the tree. | Stefan Reinauer |
2011-04-15 | comment cosmetics in bootblock.ld | Stefan Reinauer |
2011-04-15 | add FILO easy payload option | Stefan Reinauer |
2011-04-15 | Handle drivers/ equally to any other sub directory. | Stefan Reinauer |
2011-04-15 | fix mainboards that were including earlymtrr.c without actually using it. | Stefan Reinauer |
2011-04-14 | drop half an uart8250 implementation from smiutil and use the common code | Stefan Reinauer |
2011-04-14 | fix coreboot compilation without serial console enabled. | Stefan Reinauer |
2011-04-14 | earlymtrr.c: wipe some dead code, use names instead of numbers and some | Stefan Reinauer |
2011-04-14 | add some comments to walkcbfs.S | Stefan Reinauer |
2011-04-14 | - drop remaining CONFIG_ROM_IMAGE_SIZE | Stefan Reinauer |
2011-04-14 | drop incorrectly used CONFIG_ROM_IMAGE_SIZE and unused CONFIG_ARCH | Stefan Reinauer |
2011-04-14 | nvidia mcp55: drop unused dbg_info | Stefan Reinauer |
2011-04-14 | cosmetic cleanup of sis966 usb2 code | Stefan Reinauer |
2011-04-14 | Use symbolic names for some MTRR bits instead of numbers in CAR code | Stefan Reinauer |
2011-04-13 | Lenovo H8 EC: add missing include for thermal.asl | Sven Schnelle |
2011-04-12 | Lenovo H8 EC: Set fancontrol to Automatic management | Sven Schnelle |
2011-04-12 | PC87384: add GPIO defines | Sven Schnelle |
2011-04-12 | Use TOM2 for highest sysmem setting for northbound memory routing (DMA). This... | Marc Jones |
2011-04-11 | Unify use of post_code | Alexandru Gagniuc |
2011-04-11 | PMH7: Add chip config | Sven Schnelle |
2011-04-11 | EC: Add Lenovo H8 | Sven Schnelle |
2011-04-10 | i945: improve get_top_of_ram() | Sven Schnelle |
2011-04-10 | In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__. | Stefan Reinauer |
2011-04-05 | X60: use pnp_write_config() instead of custom function | Sven Schnelle |
2011-04-05 | X60: move ec version info code to log_ec_version() | Sven Schnelle |
2011-04-04 | X60: assert audio mute before entering Suspend | Sven Schnelle |
2011-04-04 | X60: log firmware version | Sven Schnelle |
2011-04-04 | X60: blink suspend LED during resume | Sven Schnelle |
2011-04-04 | X60: we have ACPI_RESUME | Sven Schnelle |