summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-11-20include/device: add a comment to pci mmio cfg addr helpers and cachingMichael Niewöhner
Add a comment to the newly introduced MMIO address helpers for PCI config registers, that the pointer returned may change during the boot processs and, thus, must not be cached. Change-Id: Ieb90ae9d67a3b944d35587dec54756a17c27c86f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36875 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-20purism/librem_bdw: add/use VBT fileMatt DeVillier
Add VBT file extracted from vendor (AMI) firmware, use by default to ensure functional display after resume from S3 when using libgfxinit. Test: build/boot Librem 13v1/15v2 boards, verify functional display after resume from S3 when using libgfxinit. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I44d75486da3083cd1f07ea82dc18688db84a621e Reviewed-on: https://review.coreboot.org/c/coreboot/+/36916 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20mb/lenovo/x201: Remove unnecessary GPIO settingsArthur Heymans
GPIO49 is strapped high, so setting it low likely increases power usage. GPIO53 is hooked to a testpad so there is no reason to set it here. Change-Id: I00fb38c90417b673c2b36191c20279474eb0dc21 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-20/mb/google/hatch: Create jinlon variantWisley Chen
Create new variant for jinlon BUG=b:144150654 TEST=emerge-hatch coreboot chromeos-bootimage and boot on jinlon proto board Change-Id: I8deb29041475e38cbbf2f54519940f62b9f21822 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36681 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20cpu/intel/car: Add EC software sync to Intel romstageTim Wawrzynczak
Perform EC software sync in romstage, before memory training is started. Because the ChromeOS EC will not currently perform USB-PD negotiation until it jumps to running its RW code, this allows the system to get access to more power earlier in the boot flow. This is guarded by CONFIG_VBOOT_EARLY_EC_SYNC. BUG=b:112198832 BRANCH=none TEST=EC software sync works in update and non-update case. No significant effect on boot time (~6 ms). Change-Id: I31f3407a2afcbf288461fab1397f965f025bc07c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36211 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20security/vboot: Build vboot library with same .a that depthcharge usesTim Wawrzynczak
Currently, depthcharge and coreboot are using two different vboot libraries. coreboot is using "fwlib20", while depthcharge uses "fwlib". The only difference between the two libraries is the inclusion of vboot1-only compilation units in fwlib, which are now deprecated. Therefore, coreboot may as well use fwlib too. Vboot is expected to converge on a single firmware library soon. BUG=none BRANCH=none TEST=compiles and runs verstage correctly Change-Id: I905b781c3596965ec7ef45a2a7eafe15fdd4d9cc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36341 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20security/vboot/sync_ec: Add timestampsTim Wawrzynczak
Add 4 new timestamps to the EC software sync flow: 1) Beginning of EC software sync 2) EC finished calculating Vboot hash 3) EC is no longer requesting power limiting 4) End of EC software sync BUG=none BRANCH=none TEST=verified timestamps show up in cbmem log Change-Id: I6e5703c146b5ec27d01700fdb39cb3d2092ea8a8 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36209 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-20security/vboot: Add vboot callbacks to support EC software syncTim Wawrzynczak
Use the new functions introduced into the EC driver to support performing EC software sync via vboot callbacks. NOTE: This patch assumes that the EC image is added to CBFS uncompressed. Streaming decompression of the image will be added in a future patch. Also adds a new Kconfig option VBOOT_EARLY_EC_SYNC. The new Kconfig option compiles EC software sync into romstage, dependent upon having a CrOS EC. BUG=b:112198832 BRANCH=none TEST=Successful EC software sync Change-Id: I9b1458a45ab3ed5623af50f78036c4f88461b226 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36208 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20cbfs: switch to region_device for location APIsAaron Durbin
Drop struct cbfs_props and replace with struct region_device object. The goal of the cbfs locator APIs are to determine the correct region device to find the cbfs files. Therefore, start directly using struct region_device in the cbfs location paths. Update the users of the API and leverage the default boot region device implementation for apollolake. Change-Id: I0158a095cc64c9900d8738f8ffd45ae4040575ea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36939 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-20security/vboot: Remove selected_region from struct vboot_working_dataYu-Ping Wu
Since we already have pre-RAM cache for FMAP (CB:36657), calling load_firmware() multiple times is no longer a problem. This patch replaces vboot_get_selected_region() usage with vboot_locate_firmware(), which locates the firmware by reading from the CBMEM cache. In addition, returning false from vboot_is_slot_selected() implies the recovery path was requested, i.e., vb2_shared_data.recovery_reason was set. Therefore, we simply remove the vboot_is_slot_selected() check from vboot_check_recovery_request(). BRANCH=none BUG=chromium:1021452 TEST=emerge-kukui coreboot Change-Id: I27cb1a2175beb189053fc3e44b17b60aba474bb0 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-20security/vboot: Remove buffer_size from struct vboot_working_dataYu-Ping Wu
Since buffer_size is no longer used, remove it from struct vboot_working_data. BRANCH=none BUG=chromium:1021452 TEST=emerge-kukui coreboot Change-Id: Ie770e89b4a45e0ec703d5bbb8fb6a298ce915056 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-20vc/amd/agesa: Remove fam12Joe Moore
With removal of Torpedo mainboard, this code is no longer necessary. Will resolve some unique Coverity issues. Change-Id: I2927245c426566a8f80863a109d015ebf6176803 Signed-off-by: Joe Moore <awokd@danwin1210.me> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-20cpu/nb/sb: Remove fam12Joe Moore
With removal of Torpedo mainboard, this code is no longer necessary. This also removes fam12 support from northbridge and SB900 from southbridge. Change-Id: I8a30461278844d0d9ad4320f0e952774c4fd644f Signed-off-by: Joe Moore <awokd@danwin1210.me> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-11-20mainboard/amd: Remove AMD Torpedo mainboardJoe Moore
This also permits removal of vc/amd/agesa/f12, as it was the only mainboard using it. That will in turn allow resolving some unique Coverity issues reported against that source. Change-Id: I73f570f01fcb5ba0e306508a569ea97f432596b3 Signed-off-by: Joe Moore <awokd@danwin1210.me> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2019-11-20Remove MIPS architectureJulius Werner
The MIPS architecture port has been added 5+ years ago in order to support a Chrome OS project that ended up going nowhere. No other board has used it since and nobody is still willing or has the expertise and hardware to maintain it. We have decided that it has become too much of a mainenance burden and the chance of anyone ever reviving it seems too slim at this point. This patch eliminates all MIPS code and MIPS-specific hacks. Change-Id: I5e49451cd055bbab0a15dcae5f53e0172e6e2ebe Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34919 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-20Remove imgtec/pistachio SoCJulius Werner
After removing urara no board still uses this SoC, and there are no plans to add any in the future (I'm not sure if the chip really exists tbh...). Change-Id: Ic4628fdfacc9fb19b6210394d96431fdb5f8e8f1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36491 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-19Remove google/urara mainboardJulius Werner
This board never really existed and nobody has any hardware left over for it. Change-Id: Icdba4f5209725995e4a55dcdbc299a9e91a5869a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-19security/vboot: Remove vboot_named_region_device(_rw)Yu-Ping Wu
Remove vboot_named_region_device(_rw) and use fmap_locate_area_as_rdev(_rw) directly. BRANCH=none BUG=none TEST=emerge-kukui coreboot Change-Id: I244ac4e01ae5b80285162b3baffc0b30aa057bfb Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-19mb/google/octopus: Disable fmap cache for meepPatrick Georgi
By removing this code, we get approximately back to where the board was before the fmap cache feature was added, which is small enough for the Chromium OS default configuration for the board to fit into the 32KB that the bootblock can use on the chipset again. Change-Id: I52c0c30a14929913ded144bf086c12938e9c2699 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-19sb/amd/hudson: Fix typo in GEC firmware nameMarshall Dawson
Correct what looks to be errant characters in the makefile variable for the Gigabit Ethernet Controller. This should have no effect on any mainboards as none select the HUDSON_GEC_FWM symbol. Change-Id: Icb861d872973aaf2b653440cae00057d5ad89b20 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-19lib/fmap: Disable pre-RAM cache for FSP 1.0Julius Werner
Due to the way CAR teardown is handled in FSP 1.0, the results of car_get_var_ptr() aren't always reliable, which can break things when running with FMAP cache. It might be possible to fix this but would make the code rather complicated, so let's just disable the feature on these platforms and hope they die out soon. Also allow this option to be used by platforms that don't have space for the cache and want to save a little more code. Change-Id: I7ffb1b8b08a7ca3fe8d53dc827e2c8521da064c7 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-19mmio: Fix buffer_to_fifo32() order of argumentsJulius Werner
buffer_to_fifo32() is a simple wrapper to buffer_to_fifo32_prefix(), but unfortunately its arguments are swapped. This patch fixes the issue. Change-Id: I6414bf51dd9de681b3b87bbaf4ea4efc815f7ae1 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36942 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-18include: Make stdbool.h a separate fileJulius Werner
This patch moves the traditional POSIX stdbool.h definitions out from stdint.h into their own file. This helps for using these definitions in commonlib code which may be compiled in different environments. For coreboot everything should chain-include this stuff via types.h anyway so nothing should change. Change-Id: Ic8d52be80b64d8e9564f3aee8975cb25e4c187f5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-18ipq40xx: Run python script without explicit 'python' callJulius Werner
This patch changes the ipq40xx Makefile.inc to follow established coreboot practice of calling Python scripts directly rather than invoking the 'python' interpreter explicitly. This has the added effect of honoring the scripts shebang (which in this case is set to 'python2'). Change-Id: If96e8313527c411ef1bb6386e03b6a209c750131 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-18nb/intel/sandybridge/mrc: Handle P2P disabling via devicetreeNico Huber
Some Sandy Bridge boards disabled the PCI-to-PCI bridge early to avoid probing by the MRC. We can do that for all boards instead, based on the devicetree setting. Change-Id: Ie64774628fde77db2a379bdba6a921a31e52fa0d Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18sb/intel/bd82x6x: Handle enabling of GbENico Huber
The integrated GbE port is toggled via the Backed-Up Control (BUC) register. We already disable it according to the devicetree setting but never enabled it. This could lead to the confusing situation that it was disabled before (different build, vendor BIOS, etc.) but shouldn't be anymore. As we need a full reset after enabling GbE, do it in early PCH init. Change-Id: I9db3d1923684b938d2c9f5b369b0953570c7fc15 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/intel/dcp847ske: Disable xHCI via devicetreeNico Huber
This is supported by generic PCH code now. Change-Id: Id5d764c97e47cdb08a68d03002ebebd996769914 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/sapphire/pureplatinumh61: Don't write BUC and beyondNico Huber
The BUC register is actually only 8 bits wide and setting bit 5 (disabling GbE) is already done by generic code. Change-Id: I729a2a28f4b0d94eddd070dc89b7341ac0c35e4a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/samsung: Clean up LPC and IOAPIC configurationNico Huber
Don't overwrite the LPC decode config of the generic PCH code, move UART init into bootblock_mainboard_early_init() and don't enable the IOAPIC, which is already done by generic code. Change-Id: I90d090f5bff29174e68981fea3c3f04c666b1d28 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/lenovo/s230u: Don't write BUC and beyondNico Huber
The BUC register is actually only 8 bits wide and setting bit 5 (disabling GbE) is already done by generic code. Change-Id: I4b8e14606c319e8bfc48d6757087f28af1bd5dfb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/intel/emeraldlake2: Revise early initNico Huber
Move UART initialization to bootblock_mainboard_early_init() and don't override the generic LPC decode settings. Change-Id: Icdab36ae0324175d3d51a050784b94a53d4b3b7c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/hp/revolve_810_g1: Don't clear BUC and beyondNico Huber
The BUC register is actually 8 bits wide and shouldn't be bluntly cleared. Change-Id: I2ffd2d161005e839e730102b56af4f66efeb551e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/google(sandybrige): Clean up LPC and IOAPIC configurationNico Huber
Only set LPC decode bits that the generic PCH code doesn't set yet. And don't enable the IOAPIC, which is already done by generic code. Change-Id: I9d2f6a9ad3f5d83573e07596f2763edc75f4ee64 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/gigabyte/ga-b75m-d3h: Drop useless function-disable settingNico Huber
This bit is already cleared by a reset. Change-Id: Ib71496011c9621476a7327ba309f367c7fa971e4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/{gigabyte,lenovo}: Remove spurious setting of ETR3 bit 16Nico Huber
This bit is used to indicate xHCI routing across reboots. If anything, coreboot should act on it, not set it during boot. ASL code would be supposed to set it. Change-Id: Id14647ac4e591cfa042ca8aad6dfc6ccda35c74a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/compulab/intense_pc: Clean PCH and super-i/o config upNico Huber
The generic PCH code already enables a superset of LPC decoding. Move UART setup to bootblock_mainboard_early_init() where it is expected. Last but not least, remove an odd write to BUCs (RCBA+0x3414) and beyond, as it's an 8-bit register and shouldn't be bluntly zeroed. Change-Id: I24a4ccf6a529460a83f48522d2e05e6ad6614f81 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/asus/p8h61-m*: Drop unnecessary PCH configNico Huber
The generic PCH code already sets up a superset of these decodings. Change-Id: I90bca37c46b89c35f323225fc3c087f1630397e4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18mb/apple/macbookair4_2: Drop unnecessary PCH configNico Huber
mainboard_pch_lpc_setup() and mainboard_late_rcba_config() did 4 things here on top of the generic PCH code: 1. Enabling LPC decoding for gameports. It seems unlikely that anything is using these ports and there is no code to support gameports. 2. Decoding of COM3 instead of COM2. What COM? 3. Premature locking of ETR3/global reset. Bad idea. 4. Disabling the GbE port in BUC. Already done by PCH code. Change-Id: Ie92dbf5c6813435995c4d24ed807ffc8d125953a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-18nb/intel/sandybridge: Set up console in bootblockArthur Heymans
Change-Id: Ia041b63201b2a4a2fe6ab11e3497c460f88061d1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18ec/hp/kbc1126: Include early_init.c in bootblockArthur Heymans
Change-Id: I198709efe1eb5d2022d0fbd640901238e696eaa6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-11-18nb/intel/sandybridge: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between romstage and bootblock. LPC setup and BAR initialization is now done twice. The rationale is that the romstage should not depend too much on the bootblock, since it can reside in a RO fmap region. Enabling the console will be done in a followup patch. Change-Id: I4d0ba29111a5df6f19033f5ce95adcc0d9adc1fd Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Configure DCACHE_BSP_STACK_SIZEArthur Heymans
The romstage default is to set stack guards at 0x2000 below end of stack. The code is now overwrites some of the stack guards so increase the stack size to a comfortable 0x2800. Change-Id: I91f559383a987241b343e743d11291f2c100f7f5 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36884 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18sb/intel/bd82x6x: Make the pch_enable_lpc hook optionalArthur Heymans
This also changes the name to mainboard_pch_lpc_setup to better reflect that it is an optional mainboard hook. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: Ie8e6056b4c4aed3739d2d12b4224de36fe217189 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18nb/intel/sandybridge: Make the mainboard_rcba_config hook optionalArthur Heymans
This also changes the name to mainboard_late_rcba_config to better reflect what it does. This adds an empty weakly linked default. The rationale behind this change is that without an implementation of the hook some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I1897d0f5ca7427d304a425f5256cd43c088ff936 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18*/Makefile: Always build enable_usbdebug.cArthur Heymans
This always builds the usb debug callback functions when implemented. They get garbage collected if CONFIG_USBDEBUG is not set. Change-Id: I33051df583645cd00d08e06774383763172d5822 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-11-18soc/amd/stoneyridge: Fix building with USBDEBUGArthur Heymans
Change-Id: I425583377cba8d57acabfd59922f421d1fb5891f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-18sb/intel/common: Properly guard USB debugArthur Heymans
The declarations in usb_debug.c needs to be guarded in order to not conflict with other chipsets. Change-Id: I84c3401b9419f2878c2cfdf81147fa854018f9ae Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36878 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Mike Banon <mikebdp2@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-18nb/intel/sandybridge: Make the mainboard_early_init hook optionalArthur Heymans
This adds an empty weakly linked default. The rationale behind this change is that without the callback some features might not work but that the result is likely still able to boot, so it can be made optional. Change-Id: I62c8010aa81fc45d208e9293feb2f45b45f34a82 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-17mb/{i945,ich7}: Remove redundant write on V0CTLElyes HAOUAS
RCBA32(V0CTL)= 0x80000001 already done inhere i945/early_init.c Change-Id: Ia775f4e6158a217b48629d289845537e7ccf5e79 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-16security/vboot: Add config option to always enable the displayWim Vervoorn
In order to always show the bootlogo very early in coreboot we need the option to always enable the display when VBOOT is enabled. To do this a config option is added to make sure this functionality can be provided without interfering with systems that require the standard VBOOT display handing. BUG=N/A TEST=tested on facebook fbg1701. Change-Id: I3ffaac85d2082717bb9608d536f7cec66a583789 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-16soc/mediatek/mt8183: Get more space for PreRAM memconsoleHung-Te Lin
Leave more space for PreRAM memconsole especially for seeing complete logs when doing DRAM full calibration (that outputs in 200+k to UART): - Shrink Full-K mem space (the ELF blob today needs ~132K) - Move PRERAM_CBFS_CACHE to L2C since it's no used after DRAM is up - Shrink TIMESTAMP to 1k (all other non-MTK ARM SOCs use only 1k) - Incease PRERAM_CBMEM_CONSOLE to 63k-4 - Reordered few sections to align at better locations BUG=b:144542023 TEST=emerge-kukui coreboot chromeos-bootimage; boot and see logs Change-Id: I8696fb01653c0a581cf62e687dc523cb6fed9a32 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-16kohaku: Set GPP_A10 to NCShelley Chen
Setting GPP_A10 to NC now that older boards are deprecated and this GPIO is not in use anymore. BUG=b:142056166 BRANCH=hatch TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: If8a249a3dcba90bb4ccb5e3f02595e680f789f93 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36869 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16vendorcode/eltan/security: Move eltan security from chipset to security menuWim Vervoorn
The eltan security items ended up in the chipset menu which is not desired. Now the eltan security option (when enabled in mainboard) shows up in the security menu. BUG=N/A TEST=build Change-Id: I3b2aa3836e8d9a3242c6d1f3ba7b7821a5cfb9d3 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36851 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-16mb/{kontron/968lcd-m,roda/rk886ex}: select non-SPIArthur Heymans
These mainboard don't feature a SPI flash. The SPI init code will timeout on probing for a SPI flash which takes a lot of time. Not including all SPI drivers also lightens the uncompressed ramstage of about 17K or 7K compressed. Change-Id: Icc7bf62d56fc2ef38854402e658830b8d59c737f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36870 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16sb/intel/i82801gx: Only include SPI code with SPI boot devicesArthur Heymans
On devices lacking SPI boot devices there is a hefty timeout penalty on probing for flash chips and this code would not be useful anyway. Change-Id: I0bec11372ef54c1e1e611b81f7013932257f4ca6 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36868 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16vendorcode/security/eltan: Allocate memory from bootmem to speed up hashingWim Vervoorn
The verified_boot_check_cbfsfile() will now try to allocate a buffer from bootmem if the item in the list has the VERIFIED_BOOT_COPY_BLOCK attribute set. For large payloads this speeds up the hash operation. BUG=N/A TEST=build Change-Id: Ifa0c93632c59d05ae6d32f8785009a3c3568abc5 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-16vboot: remove vboot_possibly_executed functionJoel Kitching
vboot_possibly_executed previously provided some better compile-time code elimination, before CB:32716 made vboot_logic_executed capable of that directly. BUG=b:124141368, TEST=make clean && make test-abuild BRANCH=none Change-Id: If5ca8f03c51e1ced20e1215b1cfdde54da3d001f Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36863 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16vboot: update commentPatrick Georgi
The comment in the source referred to an earlier approach, so update it to match current reality. Change-Id: I9a23ec0a719fb623cfd465c397ef7ef16550b93c Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Joel Kitching <kitching@google.com>
2019-11-16intel/skylake: Use new PCIe RP devicetree updateNico Huber
The old code stumbled when the whole first group of root ports was disabled and also made the (sometimes wrong) assumption that FSP would only hide function 0 if we explicitly told it to disable it. Change-Id: Ia6938ca6929c6d9d0293c4f0f0421e38bf53fb55 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36702 Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-16soc/intel: Implement PCIe RP devicetree update based on LCAPNico Huber
Most of the current implementations for FSP-based platforms make (sometimes wrong) assumptions how FSP reorders root ports and what is specified in the devicetree. We don't have to make assumptions though, and can read the root-port number from the PCIe link capapilities (LCAP) instead. This is also what we do in ASL code for years already. This new implementation acts solely on information read from the PCI config space. In a first round, we scan all possible DEVFNs and store which root port has that DEVFN now. Then, we walk through the devicetree that still only knows devices that were originally mentioned in `devicetree.cb`, update device paths and unlink vanished devices. To be most compatible, we work with the following constraints: o Use only standard PCI config registers. o Most notable, don't try to read the registers that configure the function numbers. FSP has undocumented ways to block access to non-standard registers. o Don't make assumptions what function is assigned to hidden devices. The following assumptions were made, though: o The absolute root-port numbering as documented in datasheets matches what is read from LCAP. o This numbering doesn't contain any gaps. o Original root-port function numbers below a PCI device start at function zero and also don't contain any gaps. Change-Id: Ib17d2b6fd34608603db3936d638bdf5acb46d717 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35985 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/x4x: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
There is some overlap between things done in bootblock and romstage like setting BARs. Change-Id: Icd1de34c3b5c0f36f2a5249116d1829ee3956f38 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36759 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/i945: Initialize console in bootblockArthur Heymans
Change-Id: Ic6ea158714998195614a63ee46a057f405de5616 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36796 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-15nb/intel/i945: Move to C_ENVIRONMENT_BOOTBLOCKArthur Heymans
Console init in bootblock will be done in a separate CL. Change-Id: Ia2405013f262d904aa82be323e928223dbb4296c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36795 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/i945: Move boilerplate romstage to a common locationArthur Heymans
This adds callbacks for mainboard specific init. Change-Id: Ib67bc492a7b7f02f9b57a52fd6730e16501b436e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36787 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15nb/intel/x4x: Move boilerplate romstage to a common locationArthur Heymans
This adds 3 mb romstage callbacks: - void mb_lpc_setup(void) to be used to set up the superio - void mb_get_spd_map(u8 spd_map[4]) to get I2C addresses of SPDs - (optional)mb_pre_raminit_setup(int s3_resume) to set up mainboard specific things before the raminit. Change-Id: Ic3b838856b3076ed05eeeea7c0656c2078462272 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36758 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15soc/intel/skylake/acpi/dptf: Disable DTRP when no DPTF_TSRX_SENSOR_ID is definedWim Vervoorn
On mainboards without DPTF_TSRX_SENSOR_ID method DTRP is never called Only add the DTRP method when at least one sensor is enabled. BUG=N/A TEST=build Change-Id: I4fb26d5bbb7b334e759e7073b680f830f412467e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36856 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Select HAVE_IFD_BIN and HAVE_ME_BINFrans Hendriks
Add IFD and ME binary to generate complete SPI image. BUG=N/A TEST=Boot Embedded Linux 4.20 on Facebook FBG-1701 Change-Id: I9370bf9f2bba8887988bc6484524f6cf53bed8db Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34448 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15cbfs: remove prepare() callback from struct cbfs_locatorAaron Durbin
The prepare() callback is no longer utilized in the code. Remove the callback and support for it. Change-Id: Ic438e5a80850a3df619dbbfdecb522a9dc2c1949 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2019-11-15soc/intel/{icl,tgl}: Rename pch_early_init() to pch_init()Subrata Banik
This patch renames pch_early_init() function as per review feedback CB:36550 Change-Id: I9f638e738d1a910b688cc3e51795230b2e542f82 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-11-15soc/intel/common: Make alignment proper for commentsSubrata Banik
Change-Id: If932582d03bb2f6d3d14c9bce45cf2030f3b3c4e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
Add a new Kukui follower 'kakadu'. BUG=None TEST=make # select kakadu Change-Id: I9f25ce90285828c43435e45d9361ee7128d407fa Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36848 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: Add SX9310 sensor to devicetreeSheng-Liang Pan
Add semtech SAR sensor. BUG=b:143449140 BRANCH=octopus TEST=Boot kernel with sx931x driver, i2cdetect show UU on slave address. Change-Id: Icfb8acf1bac73973748aa7443c95147c60bad770 Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36850 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/google/octopus/variants/bobba: support LTE power sequenceSheng-Liang Pan
GPIOs related to power sequnce are GPIO_67 - EN_PP3300 GPIO_117 - FULL_CARD_POWER_ON_OFF GPIO_161 - PLT_RST_LTE_L 1. Power on: GPIO_67 -> 0ms -> GPIO_117 -> 30ms -> GPIO_161 2. Power off: GPIO_161 -> 30ms -> GPIO_117 -> 100ms -> GPIO_67 3. Power reset: - keep GPIO_67 and GPIO_117 high and - pull down GPIO_161 for 30ms then release it. BUG=b:144327240 BRANCH=octopus TEST=build image and verify on the DUT with LTE DB. Change-Id: I68b71425391eda1e92806fecdb9c8dcd54f0b95a Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36771 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Remove logo from verify list when disabledWim Vervoorn
Remove the logo.bmp file from the verify list when FSP1_1_DISPLAY_LOGO is not set. BUG=N/A TEST=build Change-Id: I87eac0b3cbe9450d5623b5331d8de096f140b595 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36853 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Changed the order of the verify_listsWim Vervoorn
Changed the order of the verify lists and updated the comments to reflect the order of execution. This makes the list easier to understand and maintain. BUG=N/A TEST=tested on fbg1701 Change-Id: Ia656fbf07e5d42bafd328eaba69b660e5a1e4f1a Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36817 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Stagenames now use CONFIG_CBFS_PREFIXWim Vervoorn
Change from hardcoded "fallback/*" to using CONFIG_CBFS_PREFIX. BUG=N/A TEST=tested on fbg1701 Change-Id: Ie728d01ebb93edd88516e91528ecaaa3f139b7a9 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36819 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Only verify the publickey when neededWim Vervoorn
The public key should only be validated if the manifest is signed. BUG=N/A TEST=testedd on fbg1701 Change-Id: I703ed442e0b1926859f593ce9ca84133013224ea Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15vendorcode/eltan/security: Cleanup prog_locate_hookWim Vervoorn
Cleanup of the prog_locate_hook routine so the actual coreboot flow is more clearly reflected in the code. Remove logging that is not really needed. BUG=N/A TEST=tested on fbg1701 Change-Id: Iab6c75beac35d043d296336021c0bce1f828cf34 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36846 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15vendorcode/eltan/security: Remove cbfs prepare and locateWim Vervoorn
The prepare functionality will be removed from cbfs support and the eltan verified boot is the only software using it. This is not really required as we can use the prog_locate_hook() for this functionality. BUG=N/A TEST=tested on fbg1701 Change-Id: I189cbad4b24bbbb0840ce6100c89a42a327c5456 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36821 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15vendorcode/eltan/security: Add all verify_lists to include fileWim Vervoorn
Some of the verify lists were added to the include file while others are on vboot_check.c. Also added the ramstage_verify_list. BUG=N/A TEST=tested on fbg1701 Change-Id: If4f1d8b2278277d0af78e357ecce0d5bef441179 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36820 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-15mb/facebook/fbg1701: Removed unused include fileWim Vervoorn
Removed unused include file. BUG=N/A TEST=build Change-Id: I040b695a893b51de06f9658abdca8867727f053d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36818 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Correct the postcar_verify_listWim Vervoorn
The postcar_verify_list should contain the items that should be verified before the postcar stage is started. BUG=N/A TEST=build Change-Id: I328858e4803873fed6d47313def5e7b9a434e8ad Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15mb/facebook/fbg1701: Align handling of bootblock and publickeyWim Vervoorn
The bootblock measurement was handled using the romstage_verify_list() and the public_key in the mb_log_list. This is confusing as these are both read-only items that should be handled in the same way. Both will be handled in the romstage_verify_list(). BUG=N/A TEST=tested on fbg1701 Change-Id: If05198deec85188f39a221a8b755798755afa5bb Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36814 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15vendor/eltan/security: Removed long lines from vboot_checkWim Vervoorn
Removed long lines from the verified_boot_check_buffer() function. BUG=N/A TEST=build Change-Id: I2ea0ae82bd531355111d6b45c67bdc2b1759b7bc Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-15security/vboot: Remove flags from struct vboot_working_dataYu-Ping Wu
Since now we have persistent context, the usage of the flags can be replaced with vb2_context.flags. BRANCH=none BUG=chromium:1021452 TEST=emerge-kukui coreboot Change-Id: I8e5757a8cc09712c3acde9cbaab910b7498681b4 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-11-15vboot: use vboot persistent contextJoel Kitching
vb2_context object is now stored on the workbuf as part of vb2_shared_data. Use vboot's new API functions vb2api_init and vb2api_relocate to create and move the workbuf. BUG=b:124141368, chromium:994060 TEST=Build locally BRANCH=none Change-Id: I051be1e47bf79b15a1689d49a5d4c031e9363dfa Signed-off-by: Joel Kitching <kitching@google.com> Also-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/1902339 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2019-11-14soc/qualcomm: Link cbmem.c only in romstageArthur Heymans
Change-Id: I008fcca024fecf462c4b550b8dedbf4b06e491b8 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36368 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14rockchip/rk3288: Split free SRAM more evenly between stagesJulius Werner
When CB:33068 disabled the bootblock console on RK3288, it saved a whooping 7K of SRAM, but it didn't readjust the stage boundaries to spread that bounty evenly. This patch moves 4K of free space from the bootblock to verstage/romstage to allow for future expansion. Change-Id: I68a09ba80bde0d4f17fba1f7b38c63b7cf2a4672 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-14security/intel: Hide Intel submenu when INTEL TXT is disabledWim Vervoorn
An empty submenu Intel is displayed in security menu when INTEL_TXT is disabled. Enable submenu Intel only when INTEL_TXT is enabled. BUG=N/A TEST=build Change-Id: Iff1d84ff60a15259b60c6205a63a27ecb26346a3 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-11-14soc/sifive/fu540: Support booting from SD cardXiang Wang
Change-Id: I18948d31c0bf0bf9d641480a35fc710b9ee8ae84 Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35119 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-11-14drivers/spi: add drivers for sdcard mounted on the spi busXiang Wang
Currently supports initialization, read, write, and erase operations. Tested on HiFive Uneashed implementation follows SD association's SPI access protocol, found as doc http://t.cn/AiB8quFZ Change-Id: I464d2334b8227e448c1c7e324c0455023cffb72a Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-14vendorcode/amd/agesa: Correct typoWim Vervoorn
Correct typo of 'uninitialized' BUG=N/A TEST=build Change-Id: I43c6eb0287d23546a2abb330c7cc8585a33b27b5 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36776 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14{drivers,mainboard}: Move FSP logo support to fsp1_1Frans Hendriks
Support to display a logo using FSP 1.1 currently resides in facebook fbg1701 mainboard. The related support is moved to drivers/intel/fsp1_1 and used by the Facebook fbg1701 mainboard. The storage for the uncompressed logo is changed. We don't use .bss any longer as the logo doesn't need to be available at runtime. BUG=N/A TEST=booting Facebook fbg1701 Change-Id: I276e6e14fc87d0b95fe5fdf7b617afd26769de79 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-11-14sb/intel/i82801gx: Don't setup CIR when the northbridge is x4xArthur Heymans
The northbridge code to set up DMI is not correct and the CIR bits relate to that. This fixes a regression caused by 2437fe9 'sb/intel/i82801gx: Move CIR init to a common place', where payloads hang on southbridge IO. Change-Id: Iabb54d9954d442a1a7b48a6c6e76faa8079a4c71 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36809 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14mb/*/*(ich7/x4x): Use common early southbridge initArthur Heymans
One functional change is that southbridge GPIO init is moved after console init. Change-Id: I53e6f177aadcdaa8c45593e0a8098e8d3c400d27 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36757 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14sb/intel/i82801jx: Move early sb init to a common placeArthur Heymans
Setting southbridge GPIO is now done after console init, which should be fine. This code is partially copied from i82801ix. Change-Id: I51dd30de4a82898b0f1d8c4308e8de4a00d1b7aa Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36756 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14sb/intel/i82801gx: Add common early codeArthur Heymans
Remove some of the code duplication on i82801gx. x4x boards are left untouched for now since that northbridge also supports i82801jx. The order of some things has changed: - on i945 early_ich7_init is now done before the raminit - enabling the IOAPIC is done before the raminit Change-Id: Ie39549938891e17667a8819b49a78b9c71c8ec9e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36754 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch: clean manufacturing information in spdWisley Chen
Clean the vendor/manufacturing information in 16G_3200_4bg spd to become generic spd. BUG=None TEST=emerge-hatch coreboot Change-Id: I163dc4631a6b71efd36c75cfe1fc759040113387 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36810 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14/mb/google/hatch/var/dratini: Add new memory supportWisley Chen
1. ram id 8: 16G 2666 2 bank groups memory 2. ram id 9: 16G 3200 4 bank groups memory BUG=b:142762387 TEST=boot with memory (KAAG165WA-BCT/H5ANAG6NCMR-XNC) Change-Id: Ic63d911458b59de11c12ce776f6f7d04b1eb3b6c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36667 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-11-14soc/intel/tigerlake: Include few more Tigerlake device IDsSubrata Banik
This patch performs below operations 1. Add few more MCH, ESPI and IGD IDs 2. Remove TGL-H IDs 3. Rename existing as per applicable names 4. Remove TODO from report_platform.c file 5. Include TGL IDs into report_platform.c file Change-Id: I7bb3334d0fe8ba72e394d1a63b3a73840b4eaf2f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 11:14:06 +0000