| Age | Commit message (Collapse) | Author |
|---|
|
1. Mark 256KiB at end of BIOS region as unusable BIOS region is
memory-mapped just below 4GiB, however last 256KiB is unusable. Mark it
accordingly in fmd file.
2. Use up holes in RW region for RW_A and RW_B.
3. Fill up holes in RO with UNUSED regions.
BUG=chrome-os-partner:54672
Change-Id: I5facc566bb70d950522e12228b0631ddf00ac63d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15313
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
for per cs training, there should be more cycles to switch delay line.
so increase W2W_DIFFCS_DLY_F0 value from 0x1 to 0x5.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 1000" and pass
Change-Id: I11720b7c6f009789b88ca26fc5da88597ed1622e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9de93beae09174d50a31d2df655529f71628f77c
Original-Change-Id: Ide23fff04fd63fb0afc538b610b7685756f79f8d
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/352953
Original-Commit-Ready: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Derek Basehore <dbasehore@chromium.org>
Reviewed-on: https://review.coreboot.org/15307
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
After write leveling for all ranks, check the
PHY_CLK_WRDQS_SLAVE_DELAY result, if the two ranks in one slice both
meet (0x200-PHY_CLK_WRDQS_SLAVE_DELAY < 0x20) or
(0x200-PHY_CLK_WRDQS_SLAVE > 0x1E0), enable PHY_WRLVL_EARLY_FORCE_ZERO
for this slice, and trigger write leveling again.
BRANCH=none
BUG=chrome-os-partner:54144
TEST=run "stressapptest -M 1024 -s 1000" and pass
Change-Id: I1a0e4e888eb62b5fae5b5e5437a385e8660a246d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 717cbac97b2045f2934e99859ce405aa3637b1c4
Original-Change-Id: Ic0d7c59404e870a7108ed64bbf3215fcc2d0973e
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/351825
Reviewed-on: https://review.coreboot.org/15300
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To fully define TPM attachment to a SPI interface both bus and CS
(chip select) settings are required. Add the missing CS configuration
option.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=with the rest of the patches applied it is possible to compile in
and run TPM2 SPI driver.
Change-Id: If297df8e5b9526f156ed1414eb9db317d6af5b33
Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/353913
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15299
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This introduces a SPI TPM driver compliant with the TCG issued "TPM
Profile (PTP) Specification Revision 00.43" which can be found by
googling its title.
The driver implements both the hardware flow control protocol and the
TPM state machine.
The hardware flow control allows to map SPI based TPM devices to the
LPC address space on x86 platforms, on all other platforms it needs to
be implemented in the driver software.
The tis layer is somewhat superficial, it might have to be expanded
later.
A lot more implementation details can be found in the code comments.
Also, it is worth mentioning that this is not a complete version of
the driver: its robustness needs to be improved, delay loops need to
be bound, error conditions need to propagate up the call stack.
BRANCH=none
BUG=chrome-os-partner:52132, chrome-os-partner:50645, chrome-os-partner:54141
TEST=with the rest of the patches applied coreboot is able complete
Chrome OS factory initialization of the TPM2 device.
Change-Id: I967bc5c689f6e6f345755f08cb088ad37abd5d1c
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5611c6f7d7fe6d37da668f337f0e70263913d63e
Original-Change-Id: I17d732e66bd231c2289ec289994dd819c6276855
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350124
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15298
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
Tested-by: build bot (Jenkins)
|
|
The CENTER LOGIC should always be 0.9V and can not be adjusted,
so use duty_ns = 2860 to correct CENTER LOGIC to 0.9V. And now
DDR seems to run stable at 800MHz on the gru board.
BRANCH=none
BUG=chrome-os-partner:54144, chrome-os-partner:53208
TEST=run "stressapptest -M 1024 -s 1000" and pass
Change-Id: Ia900e248c10ddd0ab630446a324cc0446c0fa49b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: f4fb1cefb59ac4099cef8b32a68ed9222e708478
Original-Change-Id: I2238da6c17908d09bc284b321d796901317ed9ef
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/352772
Reviewed-on: https://review.coreboot.org/15297
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Set up the pins and initialize the driver.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to
communicate with the cr50.
Change-Id: I9fc1cb84ccababa6f58b2d5beec4572dc1d79da1
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 6100471db2a00fd411afc05d621429b8f8a2f81d
Original-Change-Id: I0ccd8777288e35870658268813c9202dd850c70d
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349852
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/15296
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This register is described in the TRM in section called
GRF_GPIO3D_IOMUX. Added definitions allow to configure the SPI0
interface.
BRANCH=none
BUG=chrome-os-partner:50645, chrome-os-partner:51537
TEST=with the rest of the patches applied it is possible to
communicate over SPI0
Change-Id: Ieee3fcae6095020042b02673c7d863f398ed2eb4
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 8f155e3b47c9f44ad4e5a2513916572e7d5ec0ab
Original-Change-Id: Iea92971b0520dc4549cd0fd263dcb2098f80f6d6
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349851
Original-Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-on: https://review.coreboot.org/15295
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Until now it was assumed that all TPM devices were of the same type
(TCG 1.2 spec compliant) and x86 based boards had LPC connected TPMs
and all other boards had I2C connected TPMs.
With the advent of TPM2 specification there is a need to be able to
configure different combinations of TPM types (TPM or TPM2) and
interfaces (LPC, I2C and SPI).
This patch allows to do it. Picking Chrome OS still assumes that the
board has a TPM device, but adding MAINBOARD_HAS_TPM2 to the board's
Kconfig will trigger including of TPM2 instead.
MAINBOARD_HAS_LPC_TPM forces the interface to be set to LPC, adding
SPI_TPM to the board config switches interface choice to SPI, and if
neither of the two is defined, the interface is assumed to be I2C.
BRANCH=none
BUG=chrome-os-partner:50645
TEST=verified that none of the generated board configurations change
as a result of this patch. With the rest of the stack in place it
is possible to configure different combinations of TPM types and
interfaces for ARM and x86 boards.
Change-Id: I24f2e3ee63636566bf2a867c51ed80a622672f07
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 5a25c1070560cd2734519f87dfbf401c135088d1
Original-Change-Id: I659e9301a4a4fe065ca6537ef1fa824a08d36321
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349850
Original-Reviewed-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/15294
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@googlemail.com>
|
|
BUG=chrome-os-partner:54563
Change-Id: If07710333cbb84ce70d6d4fa40602a74c898c08a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15293
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
get_bios_size returns the value of bios_size. Use this function to
calculate bios_size for caching in bootblock.
BUG=chrome-os-partner:54563
Change-Id: I2e592b1c52138bd4623ad2acd05c744224a8e50b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15292
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
This variable name was changed in chip.h but not the consumer
and it was submitted before it was caught.
Change-Id: I7c492b588b2fd854a9eeac36029a46da324a7b1b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15109
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I72f894fd14bf0e333d9fda970397a3c82de598c3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15121
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There is nothing to backup with RELOCATABLE_RAMSTAGE.
Change-Id: I780a71e48d23e202fb0e9c70e34420066fa0e5b5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15243
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
No boards affected, resume is always allowed when enabled
in the build.
Change-Id: I1816557da8201af9e137c389b57852ec20390b6a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15275
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some of the support functions will be built for romstage
once HIGH_MEMORY_SAVE is removed.
Change-Id: I43ed9067cf6b2152a354088c1dcb02d374eb6efe
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15242
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This file is pulled for x86 bootblock builds using ROMCC,
which would choke on struct bus.
Change-Id: Ie3566cd5cfc4b4e0e910b47785449de81a07b9ef
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15274
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
No need to make low memory backup unless we are on
S3 resume path.
Hide those details from ACPI.
Change-Id: Ic08b6d70c7895b094afdb3c77e020ff37ad632a1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15241
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Without RELOCATABLE_RAMSTAGE have WB cache large enough
to cover the greatest ramstage needs, as there is no benefit
of trying to accurately match the actual need. Choose
this to be bottom 16MiB.
With RELOCATABLE_RAMSTAGE write-back cache of low ram is
only useful for bottom 1MiB of RAM as a small part of this gets used
during SMP initialisation before proper MTRR setup.
Change-Id: Icd5f8461f81ed0e671130f1142641a48d1304f30
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15249
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I0d471766fdf46f6e61ac692fc98730a2429f981f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15234
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ib3250677ee926deaa957c83aca7479eb0159358c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15231
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I616143b55d7c5726dc2475434e3fcb08b8d69bda
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15230
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I5b9e10fe119c1a046494235e85f730bedfe8578d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15282
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
At the higher speeds stressapptest shows memory errors. We don't want
to track down random problems due to simple memory corruption, so slow
memory back down to 300 MHz until someone figures out how to make it
faster without sacrificing reliability.
BRANCH=None
BUG=chrome-os-partner:54144
TEST=stressapptest -M 1024 -s 240
Change-Id: I2417f93f65b1491a028a63ce563ed7dd7831becc
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id:
Original-Change-Id: I02182b25e677e27e8541445938f9da9ae9553fa6
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/350480
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15120
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To support gpio power off SOC, we need to pass the power off
gpio parameter to BL31. Gru reuse tsadc overtemp pin as power
off gpio, so need to iomux to gpio function when use gpio power
off function, either in bl31 or depthcharge.
BRANCH=None
BUG=chrome-os-partner:53448
TEST=Build gru
Change-Id: Ibfe64042f39f6df1b87536b50fe432859bf74426
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id:
Original-Change-Id: Ie7a1bbea4a12753f0abac7a9142f2e032686ce31
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349703
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15119
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
To support gpio reset SOC, we need to pass the reset gpio
parameter to BL31. Note: request BL31 have supported this
function.
BRANCH=None
BUG=chrome-os-partner:51924
TEST=Build gru
Change-Id: I182cff11ce6f5dc3354db0dc053c128b813acf9f
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id:
Original-Change-Id: I8283596565d552b1f3db31c28621a1601c226999
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349702
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15118
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
sometimes we need gpio number, so add this macro so we
can get the gpio number if we need.
BRANCH=None
BUG=chrome-os-partner:51924
TEST=Build gru
Change-Id: I0c8c6cc0643a66e9ae1f21b02c7364c641b9805d
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id:
Original-Change-Id: I98e8cf15543179904295a86e9f720c2d7c8b443a
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/349701
Original-Commit-Ready: Douglas Anderson <dianders@chromium.org>
Original-Tested-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15117
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Disabling ISH causes resets in FSP which leads to hang. This should be
fixed in a later stepping. Until then keep ISH enabled.
BUG=chrome-os-partner:54033
Change-Id: Id9cb276eed8d027ab6d2e81a5ec962bc730c1ff5
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15142
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Instead of hard-coding the BIOS region start and end addresses, read
BIOS_BFPREG to determine the base and limit for the mapped BIOS
region.
BUG=chrome-os-partner:54563
Change-Id: Iddd3d4cc945f09e8f147e293bb9144471a6a220d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15269
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:54563
Change-Id: I56bc6b5292aec676103a436048abee8577edd961
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15268
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This makes it clearer that the read/write operations are being performed
on the host controllers registers.
Change-Id: Id63d778a4a03c461d97e535c34b85ada3ae469de
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15281
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This allows initialization of runtime region devices and xlate region
devices where all parameters cannot be statically determined.
BUG=chrome-os-partner:54563
Change-Id: Ia6e1b695fed3bbfa08598d1593e650fc1465d41f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15267
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This makes the name consistent with other region device init macros.
Change-Id: I248894ba6c85326b615dcb71e8f498bc8be50911
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15277
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
spi_read_status reads the status register using hardware sequencing and
returns 0 on success and -1 on error. Use spi_read_status to return
appropriate value for get_sw_write_protect.
BUG=chrome-os-partner:54283
Change-Id: I7650b5c0ab05a8429c2b291f00d4672446d86e03
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15266
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
chrome-os-partner:54589
Change-Id: I5bdd417ed2f7ec013aeb8a0d4a9de57b1ad564a1
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15276
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
spi_init should be run early enough in ramstage so that any init
calls (e.g. mainboard_ec_init) that write on flash have right
permissions set.
Change-Id: I9cd3dc723387757951acd40449d4a41986836d2a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15235
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Bootblock:
- Temporary BAR needs to be assigned for SPI device until PCI
enumeration is done by ramstage which allocates a new BAR.
- Call spi_init to allow bootblock/verstage to write/erase on flash.
Ramstage:
- spi_init needs to run in ramstage to allow write protect to be
disabled for eventlog and NVRAM updates. This needs to be done pretty
early so that any init calls(e.g. mainboard_ec_init) writing to flash
work properly.
Verified with this change that there are no more flash write/erase
errors for ELOG/NVRAM.
BUG=chrome-os-partner:54283
Change-Id: Iff840e055548485e6521889fcf264a10fb5d9491
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15209
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Tested-by: build bot (Jenkins)
|
|
This I2C controller has separate registers for different speeds to set
specific timing for SCL high and low times, and then a single register
to configure the SDA hold time.
For the most part these values can be generated based on the freq of
the controller clock, which is SOC-specific. The existing driver was
generating SCL HCNT/LCNT values, but not the SDA hold time so that is
added.
Additionally a board may need custom values as the exact timing can
depend on trace lengths and the number of devices on the I2C bus. This
is a two-part customizaton, the first is to set the values for desired
speed for use within firmware, and the second is to provide those
values in ACPI for the OS driver to consume.
And finally, recent upstream changes to the designware i2c driver in
the Linux kernel now support passing custom timing values for high
speed and fast-plus speed, so these are now supported as well.
Since these custom speed configs will come from devicetree a macro is
added to simplify the description:
register "i2c[4].speed_config" = "{
LPSS_I2C_SPEED_CONFIG(STANDARD, 432, 507, 30),
LPSS_I2C_SPEED_CONFIG(FAST, 72, 160, 30),
LPSS_I2C_SPEED_CONFIG(FAST_PLUS, 52, 120, 30),
LPSS_I2C_SPEED_CONFIG(HIGH, 38, 90, 30),
}"
Which will result in the following speed config in \_SB.PCI0.I2C4:
Name (SSCN, Package () { 432, 507, 30 })
Name (FMCN, Package () { 72, 160, 30 })
Name (FPCN, Package () { 52, 120, 30 })
Name (HSCN, Package () { 38, 90, 30 })
Change-Id: I18964426bb83fad0c956ad43a36ed9e04f3a66b5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch enlists ELAN trackpad on I2C4 for reef board.
BUG=None
TEST=Build and boot to OS.
Ensure ELAN trackpad is working with ELAN trackpad driver enabled
in kernel.
Change-Id: I788600f16dea9fac0e089cb82ccfc38a960157f9
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/15213
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
BUG=None
TEST=Build with <soc/gpio.h> included in mainboard.asl
Change-Id: Id6fdc50d09c014f930fdfd5c2fde0df827ad5181
Signed-off-by: Freddy Paul <freddy.paul@intel.com>
Reviewed-on: https://review.coreboot.org/15272
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9bfaa53f8d09962d36df1e86a0edcf100bb08403
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15229
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
New structures and functions have been added to make it easier and
clearer to talk to GPIOs, configure the clock module, and toggle the
LEDs. Use that code in bootblock.c instead of doing those things
manually with hardcoded addresses.
Change-Id: If41db0220de4bc95a6c99945ec402e3026cb4eeb
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: https://review.coreboot.org/3944
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I71443c7547a113bf9b64d48fe5a85c6e2302c8aa
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/15208
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Change-Id: Idb0f621553e76e771a5d6f2d492675ccd989d947
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15228
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I02881ce465cb3835a6fa7c06b718aa42d0d327ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15227
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
RAM doesn't need any initialization on qemu, so we can simply use it
right away. No need to try using the cache as ram in the first place.
We also can place the stack in normal ram right from start and we
don't have to switch it to another place later on. Place the stack
in real mode memory which isn't used for something else.
Change-Id: Ib7a3f58a846d139f7babea5f43722a30fe0fe962
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: https://review.coreboot.org/15214
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is where the RAM is (now), on RISC-V.
We need to put coreboot.rom in RAM because Spike (at the moment) only
supports loading code into the RAM, not into the boot ROM.
Change-Id: I6c9b7cffe5fa414825491ee4ac0d2dad59a2d75c
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15149
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I2545fc184ebfaa006a75783bf3d55f009066eed3
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15110
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Variable name shadows parameter name used on other functions,
and it can be local anyway after function removal.
Change-Id: I3164b15b33d877fef139f48ab2091e60e3124c3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15240
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Not masking any bits in Operating System Capabilities, which means we
support all the capabilities that OS passed in Arg3
Change-Id: Ib87915e18e305db41b52891ac5430201dda64bb5
Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-on: https://review.coreboot.org/15021
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Instead of programming unsupported CAS use the highest supported
value. Start at DDR3 maximum of CAS 18T.
Increase error message verbosity level.
Useful for overclocking.
Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16).
Allows to run a DDR3-1600 DIMM at 933Mhz.
Change-Id: I2e8aadd541f06fa032ad7095c9a2d5e3bb7613f3
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15217
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Calculate the value from current DDR frequency.
Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16).
Change-Id: I57ffbfeb291fc2fede278d18527993e7432e9bd8
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15184
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
Add Ramaxel DRAM manufacturer id.
Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16).
The manufacturer name shows up in dmidecode.
Change-Id: I14cdc82c09f0f990e2ba18083748d11d79e53874
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15183
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
IvyBridge memory controller supports more frequencies than SandyBridge.
Required for future patches.
Change-Id: I0bcb670c20407ec0aec20bae85c4cbe6ccc44b16
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15182
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Simplify calculation of value.
Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16).
Change-Id: I3ecd12c431b46a8d2218f33d7eb3e10de3bcd61d
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15181
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Set max_mem_clock_mhz in devicetree to 933Mhz.
Allows to run the memory at up to DDR3-1866.
The same frequency was allowed within the first vendor bios,
but Lenovo than decided to limit it to DDR3-1333.
Tested on Lenovo T520 and DDR3-1600 DIMM (RMT3170eb86e9w16).
The RAM is now running at DDR3-1600 instead of DDR3-1333.
This gives about 4% performance increase in glmark2 using the
Intel GPU.
Change-Id: If15be497402d84a2778f0434b6381a64eda832d6
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15158
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
CPU_MICROCODE_MULTIPLE_FILES relies on SUPPORT_CPU_MICROCODE_CBFS,
which is not set if CPU_MICROCODE_CBFS_NONE is set.
This makes selecting CPU_MICROCODE_MULTIPLE_FILES conditional.
Change-Id: I0c28f99a1b868bbf90a6f048cce3bea4ff849f76
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/15259
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
As RAMTOP gets removed, comment becomes inaccurate.
Change-Id: Iaf25b88a4065d15c0c0682425b1d033e4a36590f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15237
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It would not be possible to set MTRR for range 1MiB to 4MiB.
Our RAMTOP is power of 2 and enabling cache for bottom
1MiB should cause no problems.
Change-Id: I3619bc25be60f42b68615bfcdf36f02d66796e02
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15238
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Required EHCI state is maintained as a CAR_GLOBAL to have it
properly migrated.
Change-Id: I8df413bec6faae4952670710c8ac804e0331c966
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15236
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Change-Id: I66238525c5c4d97313a589373144741f1be97483
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15226
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Backport from haswell.
Change-Id: I585639f8af47bd1d8c606789ca026c6d2d0cc785
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15225
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Boards incorrectly used intel include file for AMD board.
Change-Id: I6d3172d1aa5c91c989a6ef63066a7cd6f70013f5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15232
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ieeae96d53627768de98006074c8c8e826b1741fc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15233
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Reference to CACHE_AS_RAM was from the days we had
romcc boards using socket_mPGA605.
Change-Id: If397db83a01adeda4dd18d8b4c6e89bf0984264a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15224
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I2539e490e160e01cab2ad8d2086d2f242a88c640
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15223
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Update tuned DLL setting on all other mode, including SDR12
SDR25 and DDR50.
Change-Id: I1eb85ac6080fd78f63816d3fa9ef482484bd9f94
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/15210
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I3c517fc55dd333b1a457324f1d69aeb6f70acec2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15197
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
This is more of ACPI S3 resume and x86 definition than CBMEM.
Change-Id: Iffbfb2e30ab5ea0b736e5626f51c86c7452f3129
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15190
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I36056af9f2313eff835be805c8479e81d0b742bf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15196
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This Kconfig is deprecated, new platforms need to locate
ramstage stack in CBMEM instead.
Change-Id: I20ece297302321337cc2ce17fdef0c55242a4fc3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15189
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Now that the flash size is increased to 16MiB, add RW_NVRAM and
RW_LEGACY sections to chromeos.fmd file.
BUG=chrome-os-partner:54390
Change-Id: I6c79d35295c4bc774f05f8045ac920474d7a791f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15192
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Use entire 16MiB flash size on reef. Adjust SIGN_CSE region
accordingly.
BUG=chrome-os-partner:54390
Change-Id: I94de509bdb2aa94625814123bf4d9758bfa37fc9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15191
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I189836282b4ad084fbbb74199b24505f5e141b60
Signed-off-by: Prabal Saha <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/15207
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Migrate google/rikku (Acer Chromebox CXI2) from Chromium tree to
upstream, using google/guado as a baseline.
original source:
branch firmware-rikku-6301.110.B
commit 2e71207 [CHERRY-PICK: broadwell: Update to microcode 0x1F]
TEST=built and booted Linux on rikku with full functionality
blobs required for working image:
VGA BIOS (vgabios.bin)
firmware descriptor (ifd.bin)
Intel ME firmware (me.bin)
MRC (mrc.bin)
external reference code (refcode.elf)
Change-Id: Iba618a0b2cf2d613f6429b3e7606e0b47fa97a4d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/12802
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Offsets start from 0 instead of 1. Fix this in the gnvs definitions.
BUG=chrome-os-partner:54342
Change-Id: Id6766a8766ef430d19ffcb801bfab43d38de37db
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15180
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
CBMEM console stores all the console logs in CBMEM. Address of this
location in CBMEM where console logs are stored needs to be passed up to
OS using GNVS.
1. Add CBMC to GNVS fields in globalnvs.asl
2. Add cbmc member to global_nvs_t structure in nvs.h
3. Initialize gnvs->cbmc to address of cbmem console
BUG=chrome-os-partner:54342
Change-Id: Idcd4573e626fa433c1623bdcbe29921de64539b2
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15177
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
FSP methods may require reset under certain conditions. That is indicated
by returning specific return code. Add the missing return status codes.
BUG=chrome-os-partner:54149
BRANCH=none
TEST=none
Change-Id: I460353c5f835548a98255bd3e11dbfd08260ea52
Signed-off-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-on: https://review.coreboot.org/15185
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
according to "JEDEC_DDR2_SPD_Specification_Rev1.3.pdf"
Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3)
page 16 and page 60, CL7 support added
Change-Id: I22aaf064ab8767755f74dfdb44e32d13fc61b2c4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/14976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the correct globalnvs.asl from apollolake.
BUG=chrome-os-partner:54342
Change-Id: I1a5b8f61c540bdb2668b532f032350d8e4d48010
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15178
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Update EMMC DLL setting for reef board, after that system can
boot up into EMMC successfully.
BUG=chrome-os-partner:54228
TEST=Boot up into EMMC and check with Rootdev
Change-Id: I614cd624dce9069c5565599a955f87906bcea53b
Signed-off-by: Zhao, Lijian <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/15156
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a bootblock which builds with C_ENVIRONMENT_BOOTBLOCK selected.
This is the first piece in supporting FSP 2.0. Move esraminit from
romstage into the bootblock. Replace cache_as_ram with
car_stage_entry.S and code in romstage.c
TEST=Build and run on Galileo Gen2
Change-Id: I14d2af2adb6e75d4bff1ebfb863196df04d07daf
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15132
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable uses of a common bootblock_pre_c_entry routine. Pass in TSC
value as a uint64_t value.
TEST=Build for amenia and Galileo Gen2
Change-Id: I8be2e079ababb2cf1f9b7e6293f93e7c778761a1
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15124
Tested-by: build bot (Jenkins)
Reviewed-by: Lee Leahy <lpleahyjr@gmail.com>
|
|
If a bridge has the primary bus equal to the secondary bus the
busmaster_disable_on_bus() will infinitely call itself. Avoid the
inifinite recursion by checking current bus number against the
secondary bus number.
BUG=chrome-os-partner:54262
TEST=Ran on reef. Able to actually get the chipset to assert SLP_Sx
signals which means no more infinite recursion.
Change-Id: I52b21fbba24e6a652ea8f9f87f5f49f60109c8f2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15157
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Like other boards there will likely be information needed from
GNVS in the SMM handler. Therefore, it's important that the point
is stashed accordingly.
BUG=chrome-os-partner:54275
TEST=Noted GNVS messages from SMM console on reef.
Change-Id: If12b69731330a1e0af7f8fe880635e5ffd02d715
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15152
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The UART support is needed in SMM in order for DEBUG_SMI to
function.
BUG=chrome-os-partner:54262
TEST=Ran on reef with DEBUG_SMI enabled. Can observed SMI messages.
Change-Id: Ibd6b12e27d5776046b400adf72f24133b9e54af8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15151
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It appears that PM1 is not wired up to the SMI status register, but
it does definitely cause SMIs to trigger. Therefore, provide a fake
PM1 status bit by checking the power button status when SMI status
is indicating no status as well as the PM1 control indicating that
SCI mode is not enabled.
BUG=chrome-os-partner:54262
TEST=Smashed power button on reef to cause SMI in firmware. No longer
loops infinitely with constant SMIs firing.
Change-Id: I9aa1b5f79b651cbc19a2d3353d9ef65429386889
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15155
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Provide the bit definitions for the SMI status register. Also,
utilize them which means deleting some of the handlers that can't
exist because there are no status bits.
BUG=chrome-os-partner:54262
Change-Id: I389c7cb3cad01ba0eca52a337ffee352a2010bfa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15154
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Instead of hardcoding the PCI mmio size read it from devicetree.
Set a default value of 2048 MiB and 1024MiB for laptops without
discrete graphics.
Tested on Sandybridge Lenovo T520.
Change-Id: I791ebd6897c5ba4e2e18bd307d320568b1378a13
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since the HTIF is a non-standard interface, and coreboot already has a
8250 driver, I started implementing an 8250 core for spike[1].
[1]: https://github.com/riscv/riscv-isa-sim/pull/53
Change-Id: I84adc1169474baa8cc5837358a8ad3d184cfa51b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15150
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
In the default (medlow) code model, pointers are loaded with a lui, addi
instruction sequence:
lui a0, 0xNNNNN
addi a0, a0, 0xNNN
Since lui sign-extends bits 32-63 from bit 31 on RV64, lui/addi can't
load pointers just above 0x80000000, where RISC-V's RAM now lives.
The medany code model gets around this restriction by loading pointers
trough auipc and addi:
auipc a0, 0xNNNNN
addi a0, a0, 0xNNN
This way, any pointer within the current pc ±2G can be loaded, which is
by far sufficient for coreboot.
Change-Id: I77350d9218a687284c1337d987765553cf915a22
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15148
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The uart8250mem driver needs it.
Change-Id: I09e6a17cedf8a4045f008f5a0d225055d745e8db
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15147
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I12de8f82499074f0fbbc1c09210b00c6a9614c1b
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/15146
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I9759771fa6fc708d7d97509c5f5e0cefb8ab4c96
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/14962
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Due to USB LDO issue in current steppings, cold reboot needs to be
temporarily disabled. Thus, hard_reset call should be the same as
soft_reset.
Once future steppings are available INTEL_COMMON_RESET can be enabled again.
Change-Id: If0ec56db3864d500acc93d2b363a78a6cd7632da
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/15143
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove code duplication and use the common function
store_current_mrc_cache instead.
No functionality is changed.
Tested on Sandybridge Lenovo T520.
Change-Id: I4aa5463f1b1d5e1afbe44b4bfc659524d86204db
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/15074
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Sometimes we need to pass board specific messages to BL31,
so that BL31 can do board specific operation based on
common code.
BRANCH=None
BUG=chrome-os-partner:51924
TEST=Build gru
Change-Id: I096878699c6e6933debdf2fb3423734f538691ae
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: af83e1b
Original-Change-Id: Ib7585ce7d3bf01d3ce53b388bf9bd60f3b65f5f1
Original-Signed-off-by: Lin Huang <hl@rock-chips.com>
Original-Signed-off-by: Douglas Anderson <dianders@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/349700
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: https://review.coreboot.org/15116
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
BRANCH=none
BUG=chrome-os-partner:52959
TEST=verified on elm-EVT SKU1/SKU2, Oak-rev5 2GB/4GB models.
Change-Id: I228c629d9a3d6cd8fc5c4e8ba24cc52d5283b4e6
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 3c19e7d
Original-Change-Id: I22356aa8d196c4c126742cfc7e85cc693acd9b39
Original-Signed-off-by: PH Hsu <ph.hsu@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/347716
Original-Commit-Ready: Yidi Lin <yidi.lin@mediatek.com>
Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/15115
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
All current Oak boards have PD chips with update speeds that range from
slow (Oak) to "OMG it's so awfully slow I could make a cup of coffee and
it would still not be done" (Elm). Set the flag that enables the "Your
system is applying a critical update. Please don't turn it off." message
on EC software sync so that our users don't accidentally carry it back
to the store and demand a refund while it's still not done booting.
BRANCH=None
BUG=chrome-os-partner:51145
TEST=Booted Oak in normal mode with a new EC-RW image. Confirmed that I
saw the magic screen.
Change-Id: I000eab36d26b61b25d1f0da505f02ced15457255
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 274644b
Original-Change-Id: I64ba698985d5fbcf2b94115df72b70a5319106ac
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/348787
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15114
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The VBOOT_OPROM_MATTERS configuration option signals to vboot that the
board can skip display initialization in the normal boot path. It's name
is a left-over from a time when this could only happen by avoiding
loading the VGA option ROM on x86 devices. Now we have other
boards that can skip their native display initialization paths too, and
the effect to vboot is the same. (Really, we should rename oprom_matters
and oprom_loaded to display_skippable and display_initialized or
something, but I don't think that's worth the amount of repositories
this would need to touch.)
The only effect this still has in today's vboot is to reboot and
explicitly request display initialization for EC software sync on
VBOOT_EC_SLOW_UPDATE devices (which we haven't had yet on ARM). Still,
the vboot flag just declares the capability (for skipping display init),
and it should be set correctly regardless of whether that actually makes
a difference on a given platform (right now). This patch updates all
boards/SoCs that have a conditional path based on
display_init_required() accordingly.
BRANCH=None
BUG=chrome-os-partner:51145
TEST=Booted Oak, confirmed that there's no notable boot time impact.
Change-Id: Ic7c77dbd8356d67af7aee54e7869f9ac35241b99
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: 9c242f7
Original-Change-Id: I75e5cdda2ba2d111ea50ed2c7cdf94322679f1cd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/348786
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://review.coreboot.org/15113
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
