summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-04-10samus: Adjust SATA Gen3 TX voltage amplitudeDuncan Laurie
2015-04-10broadwell: Preserve VbNv around cmos_initDuncan Laurie
2015-04-10broadwell: Add function to apply PRR to a range of SPI flashDuncan Laurie
2015-04-10samus: Add clear_recovery_mode_switch functionDuncan Laurie
2015-04-10samus: Set current backlight PWM valueDuncan Laurie
2015-04-10broadwell: Turn off panel backlight in S5 SMI handlerDuncan Laurie
2015-04-10broadwell: Skip steps when disabling PCIe portDuncan Laurie
2015-04-10broadwell: Remove XHCI workarounds on WPTDuncan Laurie
2015-04-10broadwell: Only do pre-graphics delay when running option romDuncan Laurie
2015-04-10PCI - Add interrupt disable bit definitionLee Leahy
2015-04-10samus: Add ACPI binding for rt5677 codec SPIBen Zhang
2015-04-10broadwell: Fix PCIe ports programming sequences to enable HSIOPCWenkai Du
2015-04-10samus: Add RT5677 ACPI/DT bindings with _DSDDuncan Laurie
2015-04-10broadwell: Update SATA Gen3 TX adjustment registersDuncan Laurie
2015-04-10broadwell: Add a few bits to finalize stepDuncan Laurie
2015-04-10baytrail: fix the coding error on PCIe L1 exit latencyKevin L Lee
2015-04-10TPM: Reduce buffer size to fix stack overflowJulius Werner
2015-04-10Baytrail: Prior to PCI scan, wait for LCTL to be active in 50 msKevin Hsieh
2015-04-10tpm: Remove error message for unknown resource typeDuncan Laurie
2015-04-10Broadwell: Set boot_mode of pei_data before running reference codeKenji Chen
2015-04-10samus: Move board version to a separate fileDuncan Laurie
2015-04-10tpm: Add ramstage driver and interrupt configurationDuncan Laurie
2015-04-10tpm: Move the LPC TPM driver to a subdirectoryDuncan Laurie
2015-04-10broadwell: Increase I2C SDA hold timing to 300nsChiranjeevi Rapolu
2015-04-10broadwell: add RCBA posting read after writingWenkai Du
2015-04-10Broadwell: Synchronization with FRC for Root Port Power ManagementKenji Chen
2015-04-10broadwell: Skip DDI-A enable in S3 resumeDuncan Laurie
2015-04-10broadwell: Add support for ACPI \_GPE._SWSDuncan Laurie
2015-04-10baytrail: Switch from ACPI mode to PCI mode for legacy supportMarc Jones
2015-04-10southbridge/intel/fsp_rangeley/ : Spellcheck + Formattingnicky sielicki
2015-04-10vboot: Remove unused 2lib header pathRandall Spangler
2015-04-10vboot: Include vb2_api.h, instead of lower-level vboot2 header filesRandall Spangler
2015-04-10vboot2: Reduce minimum required work buffer sizeJulius Werner
2015-04-10vboot: add physical recovery switch supportDaisuke Nojiri
2015-04-10vboot2: update fw_version_tpm when creating vboot1 shared dataDaisuke Nojiri
2015-04-10ramoops: Add support for passing ramoops region through cb tables.Furquan Shaikh
2015-04-10chromeos: Add correct dependency on HAVE_ACPI_TABLES for gvns and ramoops.Furquan Shaikh
2015-04-10vboot: reduce references to parent's files in MakefilesDaisuke Nojiri
2015-04-10vboot: fix invalid check for the returned value from spi_flash->writeDaisuke Nojiri
2015-04-10cbtables: Add RAM config informationDavid Hendricks
2015-04-10vboot: adding VBSD_BOOT_FIRMWARE_WP_ENABLED logicGediminas Ramanauskas
2015-04-10fmap: use CBFS for all other than x86 platformsVadim Bendebury
2015-04-10chromeos: Add a function to copy VPD WiFi calibration data to CBMEMVadim Bendebury
2015-04-10vboot: move vboot files to designated directoryDaisuke Nojiri
2015-04-10build system: Fix SeaBIOS integration with multilib compilersPatrick Georgi
2015-04-10mainboard/biostar: Add support for Biostar AM1ML ver7.xSergej Ivanov
2015-04-10vendorcode/amd/agesa/f16kb: Enable support for AM1 socketSergej Ivanov
2015-04-10southbridge/amd/agesa/hudson: Fix LPC_DEV definitionSergej Ivanov
2015-04-10google/cosmos: don't enable CHROMEOS by defaultPatrick Georgi
2015-04-10ipq806x: Remove extra INCLUDESPatrick Georgi
2015-04-10google/rush: Add I2C1 init and audio clock enable/resetsTom Warren
2015-04-10tegra132: Add routine to enable all audio periphs under AHUBTom Warren
2015-04-10tegra132: Add I2C1 support to funitTom Warren
2015-04-10google/rush_ryu: Add support for event logFurquan Shaikh
2015-04-10rtc: Add an RTC driver for the TI TPS65913 PMIC.Furquan Shaikh
2015-04-10elog: Hide elog_flash_offset_to_address() from SMMFurquan Shaikh
2015-04-10elog: Fix typecast issues related to 64-bit compilation.Furquan Shaikh
2015-04-10arm64: Implement PSCI command supportAaron Durbin
2015-04-10arm64: secmon: add entry point for turned on CPUsAaron Durbin
2015-04-10ryu: Add display_start apiJimmy Zhang
2015-04-10ryu: Enhance pmic access functionsJimmy Zhang
2015-04-10ryu: audio: Enable RT5677 audio codecTom Warren
2015-04-10ryu: Select pwr btn polarity based on board idFurquan Shaikh
2015-04-10gpio: compile gpio.c at all stagesDavid Hendricks
2015-04-10marvell/bg4cd: add gpio.h to fix broken buildDaisuke Nojiri
2015-04-10gpio: decouple tristate gpio support from board IDDavid Hendricks
2015-04-10gpio: add a function to read GPIO array as base-2 valueDavid Hendricks
2015-04-10gpio: cosmetic changes to tristate_gpios.cDavid Hendricks
2015-04-10rk3288: Adjust CBFS header and ROM offsetsJulius Werner
2015-04-10rk3288: don't log LAST_TSHUT bithuang lin
2015-04-10rk3288: slowly raise to max cpu voltage to prevent overshoothuang lin
2015-04-10ryu: update board id definitionsAaron Durbin
2015-04-10ryu: remove board id normalizationAaron Durbin
2015-04-10tpm: allow 0 as valid i2c bus numberDaisuke Nojiri
2015-04-10google/storm: Minor board ID changesDan Ehrenberg
2015-04-10chromeos: add another VPD access APIVadim Bendebury
2015-04-10storm: Initialize clock, pinmux for NAND if present on boardDan Ehrenberg
2015-04-10gpio: Remove non-ternary tristate mode, make ternaries easierJulius Werner
2015-04-10gpio: Extend common GPIO header, simplify function namesJulius Werner
2015-04-10storm: retrieve MAC address from VPDVadim Bendebury
2015-04-10chromeos: move VPD MAC address retrieval functionVadim Bendebury
2015-04-10arm64: secmon: pass online CPUs to secmonAaron Durbin
2015-04-10arm64: psci: use struct cpu_action to track startup entryAaron Durbin
2015-04-10arm64: secmon: prepare for passing more state into secmonAaron Durbin
2015-04-10arm64: secmon: wait for all CPUs to enter secmonAaron Durbin
2015-04-10armv7-m: set stack pointer to _estackDaisuke Nojiri
2015-04-10armv7-m: add bootblock entry pointDaisuke Nojiri
2015-04-10armv7-m: add empty cache routinesDaisuke Nojiri
2015-04-10bg4cd: set bootblock and verstage architecture to armv7-mDaisuke Nojiri
2015-04-10armv7-m: add armv7-m configurationDaisuke Nojiri
2015-04-09northbridge/amd/agesa/familyXY: Make NULL device op explicitEdward O'Callaghan
2015-04-09soc: Use DEVICE_NOOP macro formalism over static stub funcEdward O'Callaghan
2015-04-09bg4cd: drop init_timer() stubPatrick Georgi
2015-04-09bg4cd: Change all SoC headers to <soc/headername.h> systemJulius Werner
2015-04-09bg4cd, cosmos: use SPI_WRAPPER configuration modeVadim Bendebury
2015-04-09arm64: secmon: direct non-BSP cpus to start before BSPAaron Durbin
2015-04-09tegra132: configure debug uart to 115200n8 in tegra_lp0_resumeYen Lin
2015-04-09arm64: psci: add node hierarchyAaron Durbin
2015-04-09arm64: add malloc support to secmonAaron Durbin
2015-04-09arm64: add mpidr field to cpu_info structAaron Durbin