summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-08-02google/reef: Add pull up 20K for LPC SERIRQKane Chen
per hw team's check and info from EDS, this pin needs to be pu 20K. Otherwise SoC may not notice interrupt request from EC over LPC because SERIRQ line is floating. BUG=chrome-os-partner:55586 BRANCH=none TEST=boot ok and Quanta factory verified the keyboard issue is gone Signed-off-by: Kane Chen <kane.chen@intel.com> Change-Id: I5b0213514ce152d4e2cecdda8786925495a0f24a Reviewed-on: https://review.coreboot.org/15951 Tested-by: build bot (Jenkins) Reviewed-by: Freddy Paul <freddy.paul@intel.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-08-02intel/amenia: Add GPIO changes to assert SLP_S0/Reset signalShankar, Vaibhav
PMIC/PMU: Set the iosstates for PMIC to assert the reset signal, PMU to assert SLP_S0 signal. Change-Id: Iec2dd659ea21f07d0bfe74194756786375cf775c Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com> Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Reviewed-on: https://review.coreboot.org/15777 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02soc/intel/apollolake: Add iosstate macros for GPIOShankar, Vaibhav
IO Standby State (IOSSTATE): The I/O Standby State defines which state the pad should be parked in when the I/O is in a standby state. Iosstate set to 15 means IO-Standby is ignored for this pin (same as functional mode), So that pin keeps on functioning in S3/S0iX. Change-Id: Ie51ff86a2ea63fa6535407fcc2df7a137ee43e8b Signed-off-by: Venkateswarlu Vinjamuri <venkateswarlu.v.vinjamuri@intel.com> Signed-off-by: Shankar, Vaibhav <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/15776 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02drivers/fsp2_0: Increment boot count for non-S3 bootFurquan Shaikh
If ELOG_BOOT_COUNT is enabled and the boot is not s3 resume, then increment boot count. BUG=chrome-os-partner:55473 Change-Id: Ib3e77180bd640ec0424978e73034d7c99cdcba95 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15948 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Brandon Breitenstein <brandon.breitenstein@intel.com>
2016-08-02intel/apollolake: Enable upper CMOS bank in bootblockFurquan Shaikh
Upper CMOS bank is used to store the boot count. It is important to enable it as soon as possible in bootblock. BUG=chrome-os-partner:55473 Change-Id: I7c4f49c337c2e24a93c1e71466e2f66db04be562 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15998 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-02elog: Include declarations for boot count functions unconditionallyFurquan Shaikh
There is no need to add guards around boot_count_* functions since the static definition of boot_count_read is anyways unused. BUG=chrome-os-partner:55473 Change-Id: I553277cdc09a8af420ecf7caefcb59bc3dcb28f1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15997 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02drivers/intel/fsp2_0: Display FSP calls and statusLee Leahy
Disable the chatty FSP behavior for normal builds. Use a Kconfig value to enable the display of the FSP call entry points, the call parameters and the returned status for MemoryInit, SiliconInit and FspNotify. The debug code is placed into drivers/intel/fsp2_0/debug.c. TEST=Build and run on Galileo Gen2 Change-Id: Iacae66f72bc5b4ba1469f53fcce4669726234441 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15989 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-02i2c/w83795: Fix chip type messagePatrick Georgi
(val & 4) == 1 is always false. Since val & 4 is either zero or non-zero, just drop the second test (for "== 1"). Validated against the data sheet that this is really the right register, bit and value. Change-Id: I627df9a9b4fddfff486689e405f52a3b54135eef Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1241864 Reviewed-on: https://review.coreboot.org/16009 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-02amd/amdfam10: eliminate dead codePatrick Georgi
if (gart) { foo = gart?a:b; } never evaluates to foo=b. Change-Id: Ibc7376687374065585b125a670dea5fe46bda97a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347365 Reviewed-on: https://review.coreboot.org/16008 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-02console: Drop leftover struct console_driverKyösti Mälkki
Change-Id: I4d529f6393937e5b97d8546f9348b44a448330e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/16007 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-02intel/skylake: Fix UART build optionsFurquan Shaikh
1. skylake does not support UART over I/O. So, NO_UART_ON_SUPERIO needs to be selected by default. 2. Move BOOTBLOCK_CONSOLE under UART_DEBUG. 3. Include bootblock/uart.c only if UART_DEBUG is selected. Change-Id: I4e996bea2a25b3b1dfb9625d97985a9d3473561b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/16025 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-08-02intel/lynxpoint,broadwell: Fix eDP display in Windows, SeaBios & TianoPrabal Saha
Without this patch, eDP output is non-functional pre-graphics driver regardless of payload (SeaBIOS, Tianocore) or video init method (VBIOS, GOP driver) and once the standard Windows Intel HD graphics driver is loaded. Test: Boot Windows on peppy and auron_paine, install Intel HD Graphics driver, observe functional eDP output with full video acceleration. Debugging method: adjust location of call to run VBIOS within coreboot, observed that eDP output functional if the VBIOS is run before the power optimizer lines, broken if run afterwards. Change-Id: I6d8252e3de396887c84533e355f41693b9ea7514 Signed-off-by: Prabal Saha <coolstarorganization@gmail.com> Reviewed-on: https://review.coreboot.org/15261 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-01soc/intel/quark: Enable use of hard resetLee Leahy
Select HAVE_HARD_RESET in the KCONFIG file to enable use of the hard_reset routine. TEST=Build and run on Galileo Gen2 Change-Id: Ib11a80b64cf1c55aec24f2576d197da9017b9751 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15992 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-01soc/intel/common: Fix build error in reset.cLee Leahy
Fix build error caused by macro substitution in the function definition when the Kconfig value HAVE_HARD_RESET is not selected. src/soc/intel/common/reset.c:36:21: error: macro "hard_reset" passed 1 arguments, but takes just 0 void hard_reset(void) ^ src/soc/intel/common/reset.c:37:1: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token { ^ make: *** [build/bootblock/soc/intel/common/reset.o] Error 1 TEST=Build and run on Galileo Gen2 Change-Id: I793570e62a0e46cca86cc540c243e363896ceac7 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15988 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-01Remove non-ascii & unprintable charactersMartin Roth
These non-ascii & unprintable characters aren't needed. Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15977 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-01Add newlines at the end of all coreboot filesMartin Roth
Change-Id: I7930d5cded290f2605d0c92a9c465a3f0c1291a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15974 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-01arch/x86: Enable postcar consoleLee Leahy
Add a Kconfig value to enable the console during postcar. Add a call to console_init at the beginning of the postcar stage in exit_car.S. TEST=Build and run on Galileo Gen2 Change-Id: I66e2ec83344129ede2c7d6e5627c8062e28f50ad Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/16001 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-08-01arch/x86: Display MTRRs after MTRR update in postcarLee Leahy
Display the MTRRs after they have been updated during the postcar stage. TEST=Build and run on Galileo Gen2 Change-Id: I1532250cacd363c1eeaf72edc6cb9e9268a11375 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15991 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-08-01siemens/sitemp_g1p1: Fix typoPatrick Georgi
Change-Id: I1c9af223d3598c4822905acce0cf9b1dca6ad1b6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1287066 Reviewed-on: https://review.coreboot.org/15981 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2016-08-01soc/intel/common: Enable MTRR display during bootblock & postcarLee Leahy
Update Makefile.inc to allow MTRR display during bootblock and postcar. TEST=Build and run on Galileo Gen2 Change-Id: If12896df46b9edfc9fff3fab3a12d2dae23517a3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15990 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-08-01soc/intel/quark: Fix car_stage_entry routine name.Lee Leahy
Change routine name from car_state_entry to car_stage_entry. TEST=Build and run on Galileo Gen2 Change-Id: Ifd11db3fa711f2fe52ade1c6cde94f9be1f3a652 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15857 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard/bap/ode_e20XX: Enable UART 3/4 in devicetreeFabian Kunkel
This patch adds IO and IRQ information for UART 3/4 to the devicetree. Patch with Change-Id: Ief5d70c8b25a2fb6cd787c45a52410e20b0eaf2e is needed. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: I1d8fa16950079a47775f48166486415bd5d24f42 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15621 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard/bap/ode_e20XX: Add different DDR3 clk settingsFabian Kunkel
This patch adds two SPD files with different DDR3 clk settings. The user can choose which setting to use. Lower clk settings saves power under load. SoC Model GX-411GA supports only up to DDR3-1066 clk mode. Both SPD settings were tested with memtest for several hours. Power saving is around half a watt under heavy memory load. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: Ibb81e22e19297fdf64360bc3e213529e9d183586 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31mainboard/bap/ode_e20XX: Change PCIe linesFabian Kunkel
This patch binds PCIe lanes 2 and 3 to one PCIe device. PCIe device 2.4 becomes x2. Tested with the connected FPGA on PCIe 2.4. FPGA doubles transfer rate from/to the AMD. Payload SeaBIOS 1.9.1 stable, Lubuntu 16.04, Kernel 4.4.0 Change-Id: Icee567272312a7df4c3b5a6db5b420a054ec3230 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15905 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31superio/nuvoton: Add Nuvoton NCT6791DOmar Pakker
This adds support for Nuvoton NCT6791D Super I/O chips. Makes use of the common Nuvoton early_serial.c. Based on the Datasheet supplied by Nuvoton. Datasheet Version: January 8th, 2016 Revision 1.11 Change-Id: I027d33b85f0dc6ee50deebdccaecc74487eecb40 Signed-off-by: Omar Pakker <omarpakker+coreboot@gmail.com> Reviewed-on: https://review.coreboot.org/15967 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-07-31src/vboot: Capitalize RAM and CPUElyes HAOUAS
Change-Id: Iff6b1b08b8159588b964d9637b16e1e0bfcca940 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15986 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/lib: Capitalize ROM, RAM, NVRAM and CPUElyes HAOUAS
Change-Id: Id0871b0c2eb31e2d728180b44cc5b518b751add4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15985 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/drivers: Capitalize CPU, RAM and ACPIElyes HAOUAS
Change-Id: I720469ea1df75544f5b1e0cab718502d8a9cf197 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15983 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/soc: Capitalize CPU, ACPI, RAM and ROMElyes HAOUAS
Change-Id: I7f0d3400126d593bad8e78f95e6b9a378463b4ce Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15963 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/acpi: Capitalize ACPI and SATAElyes HAOUAS
Change-Id: I7a4f1bd5c9e3c8152ebdd9118adddbc526d03a53 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15959 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31sunw/ultra40m2: Fix handling non-existence of a devicePatrick Georgi
This probably never happens, but since we already test for the presence of the device, it makes no sense to try to configure it after its absense was determined. Change-Id: I9877dcd15819fb7949fa08a0954b05780df66316 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1347362 Reviewed-on: https://review.coreboot.org/15982 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-31sis/sis966: fix typoPatrick Georgi
temp8 & (!0x10) == temp8 & 0 == 0, which is certainly not intended. Change-Id: Ie9f735d31eedbec171f82929a147fc1b2e30b45a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229587 Reviewed-on: https://review.coreboot.org/15961 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31sis/sis966: don't store a 32bit value in a 16bit variablePatrick Georgi
That only makes deviceid == 0 (because shifting a 16bit value by 16 bits, well...) Change-Id: Iddca1de20760f92f70fe2d05886b488e5b48313d Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1229558 Reviewed-on: https://review.coreboot.org/15960 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31intel/broadwell: fix typoPatrick Georgi
(pci_read_config32(...) > 14) & 0x3 looks rather unusual (and prevents "case 3" below from ever happening) Change-Id: Id90655c39ff53da9569441278bbf73497d643480 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1293139 Reviewed-on: https://review.coreboot.org/15965 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31intel/skylake: Enable signalling of error conditionPatrick Georgi
Testing for "devfn < 0" on an unsigned doesn't work, and i2c_bus_to_devfn returns an int (with -1 for "error"), so use int for devfn. Change-Id: I7d1cdb6af4140f7dc322141c0c018d8418627434 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Found-by: Coverity Scan #1357450, #1357449 Reviewed-on: https://review.coreboot.org/15964 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31google/reef: Update chromeos.fmd RO_SECTIONFurquan Shaikh
Update RO_SECTION to match the changes in depthcharge: https://chromium-review.googlesource.com/#/c/364261 BUG=chrome-os-partner:55713 Change-Id: I7238856cf73a62345778ea87e191a11190b7fb38 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15966 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31intel/amenia: Enable DPTF in mainboardShaunak Saha
This patch enables DPTF support for Intel Amenia platform, adds the ASL settings specific to Amenia boards. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Amenia board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I400e2312a20870058f3a386004fad748d3ee4460 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15094 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31google/reef: Enable DPTF in mainboardShaunak Saha
This patch enables DPTF support for Google Reef platform, adds the ASL settings specific to Reef boards. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Reef boards. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: Ib43e4e9dd0d92fffc1b2c8459c552acd04ca0150 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15640 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-31gigabyte/ga_2761gxdk: Remove comment *endif*Paul Menzel
After the indentation is fixed in commit *mainboard: Format irq_tables.c* [1], the comment is redundant. So remove it. [1] Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Change-Id: Iebbcf10ee3cef1b4cf60ea34a6b3ad51e2208671 Reviewed-on: https://review.coreboot.org/15933 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31mainboard: Format irq_tables.cPaul Menzel
Run the command below to format the files `irq_tables.c` of (mostly AMD) mainboards correctly with GNU indent 2.2.10. ``` $ git grep -l 'if (sum != pirq->checksum) {' | xargs indent -l ``` Fix up the following two checkpatch.pl errors manually. ``` ERROR: that open brace { should be on the previous line #1219: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:129: + uint8_t reg[8] = + { 0x41, 0x42, 0x43, 0x44, 0x60, 0x61, 0x62, 0x63 }; ERROR: that open brace { should be on the previous line #1221: FILE: src/mainboard/gigabyte/ga_2761gxdk/irq_tables.c:131: + uint8_t irq[8] = + { 0x0A, 0X0B, 0X0, 0X0a, 0X0B, 0X05, 0X0, 0X07 }; ``` This is needed, so that follow-up commits, fixing checkpatch.pl errors and warnings, won’t run into conflicts with the git commit hooks, when for example, spaces instead of tabs are used for indentation. Change-Id: If254723f3013377fb3b9b08dd5eca6b76730ec4a Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/15932 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-31build system: really disable building CrEC when not neededPatrick Georgi
Enable users to set the EC_EXTERNAL_FIRMWARE config flag, and actively ignore anything related to EC firmware board names if enabled. BUG=none BRANCH=none CQ-DEPEND=CL:344540 TEST=emerge-samus coreboot works Change-Id: I02aa1e4bc0c98300105b83a12979e9368a40cbcf Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4f0b6fd10aa89fbb38bdebf14b8a82d52e9ee233 Original-Change-Id: I39c3038d059ec3d7710b864061fcf83b8d6d4d13 Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/345584 Original-Reviewed-by: Aaron Durbin <adurbin@google.com> Original-Commit-Queue: Martin Roth <martinroth@chromium.org> Original-Trybot-Ready: Martin Roth <martinroth@chromium.org> Original-Tested-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15938 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-31src/arch: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: Ia6ac94a93b48037a392a9aec2cd19cd80369173f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15953 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/Kconfig: Capitalize ROMElyes HAOUAS
Change-Id: I6c090f5adcc46b4e069a156c6b506a76c0aa7cb5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15952 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/device: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I133531391a20261e0926524d70c0901079076af9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15943 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31src/cpu: Capitalize CPUElyes HAOUAS
Change-Id: I58d5c16de796a91fa14d8db78722024266c09a94 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15934 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/include: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: Id40c1bf868820c77ea20146d19c6d552c2f970c4 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15942 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/southbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I01413b9f8b77ecdcb781340f04c2fe9e24810264 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15941 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de>
2016-07-31src/northbridge: Capitalize CPU, RAM and ROMElyes HAOUAS
Change-Id: I5aa27f06f82a8309afb6e06c9e462e5792aa9986 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15940 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-31src/cpu: Capitalize ROM and RAMElyes HAOUAS
Change-Id: I103167a0c39627bcd2ca1d0d4288eb5df02a6cd2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/15935 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31nvidia/tegra124: Adjust memlayout to Chrome OS toolchainStefan Reinauer
The bootblock gets slightly too big, so adjust the space assigned to it. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> BUG=none BRANCH=none TEST=emerge-nyan coreboot works again. Change-Id: Ib44d98692ae88c7cd3610c8e643d7d48ac858161 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 4b9038b018ed7a26fbce01d982b22166b328de37 Original-Change-Id: If494e49fb60c11e01ca780c84036ebf24459628c Original-Reviewed-on: https://chromium-review.googlesource.com/346492 Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Original-Commit-Queue: Stefan Reinauer <reinauer@google.com> Original-Tested-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://review.coreboot.org/15950 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31google/gale: Change board ID definition.Kan Yan
Change EVT3 board id to 5. BUG=chrome-os-partner:55320 TEST=None. BRANCH=None Change-Id: I020be47e1fdbf886c7c471d7fdcace1537875b6d Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 63bd6541055172765c31a9b1220a24d4e3604cdc Original-Change-Id: I21a8764ff95892430944778f4898d2f1d4c97fd7 Original-Signed-off-by: Kan Yan <kyan@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/362391 Original-Reviewed-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: https://review.coreboot.org/15949 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31Update degree symbol to utf-8 encoding in commentsMartin Roth
Almost all of the places where we have the degree symbol '°', it's encoded as 0xc2 0xb0 (utf-8 encoding). There are a few places where it is encoded as just a high ascii byte: 0xb0. Editors that support the high ascii 0xb0 seem to support the utf-8 0xc2 0xb0 encoding as well, but the opposite does not seem to be true. Change the high-ascii degree symbols to utf-8 encoding. Change-Id: I3d06289b802f45e938dc72b4c437fca56235b62b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15978 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31Remove extra newlines from the end of all coreboot files.Martin Roth
This removes the newlines from all files found by the new int-015-final-newlines script. Change-Id: I65b6d5b403fe3fa30b7ac11958cc0f9880704ed7 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15975 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-31intel/wifi: Include conditionally in the buildKyösti Mälkki
Keep this enabled by default as most x86 platforms could have PCI-e slots equipped with one of these Intel WiFi adapters. The Kconfig entries under google boards had no function previously, the variable was never referenced. Change-Id: I728ce3fd83d51d4e5e32b848a2079c5fcee29349 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15931 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-30mainboard/bap/ode_e21XX: Add board supportFabian Kunkel
Add next generation of BAPs (https://www.unibap.com/) SOC module, called ode_e21XX. Hardware is similar to e20XX (AMD G-Series GX-411GA Kabini), but it includes a new AMD G-Series GX-412HC (Steppe Eagle) and an updated Microsemi FPGA. Changes to Olivehillplus: - Add SuperIO Fintek F81866D - Soldered down DDR3 with ECC - User can choose between different DDR3 clk settings (lowest setting can save up to 1.2W) - Soldered down Microsemi M2S060 FPGA on PCIe lanes 2-3 Tested with: - Payload SeaBIOS 1.9.1 - Lubuntu 16.04, Kernel 4.4.0 - Windows 10 (UART functionality) Known problems: - S3 not working - IOMMU not working Change-Id: I41f6a3334ad2128695a3f7c0a6444f1678d2626e Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15918 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-30mainboard/bap/ode_e21XX: Add copy of amd/olivehillplusFabian Kunkel
Initial copy of olivehillplus. Change-Id: Ibe9b450c05bfad15a95852addb1465ac2d3cef61 Signed-off-by: Fabian Kunkel <fabi@adv.bruhnspace.com> Reviewed-on: https://review.coreboot.org/15917 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-30chromeos mainboards: remove chromeos.aslAaron Durbin
Use the ACPI generator for creating the Chrome OS gpio package. Each mainboard has its own list of Chrome OS gpios that are fed into a helper to generate the ACPI external OIPG package. Additionally, the common chromeos.asl is now conditionally included based on CONFIG_CHROMEOS. Change-Id: I1d3d951964374a9d43521879d4c265fa513920d2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15909 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-30google/reef: Use GPE0_DW1_15 as wake signal for touchpadFurquan Shaikh
Due to GPE routing, raw GPIO cannot be used for indicating the wake signal for touchpad. Instead we need to reference GPE pins. BUG=chrome-os-partner:55670 Change-Id: Ie5d8473df4301c7beef0cae8fe84e71b2838261b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15947 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-30soc/intel/apollolake: Include gpe.h in chip.hFurquan Shaikh
This is required for using GPE_* macros in devicetree.cb. BUG=chrome-os-partner:55670 Change-Id: I8f6f536df96cf8145bb0c03ec413fb2f374301b5 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15946 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-29skylake: fix VSDIO is at 0.8V when SDCard is not insertedZhuo-hao.Lee
1. Enable SoC SD_CMD/D* signals pull-down of 20k when SD-card is removed. When SD-card is disconnected, the pull-down is disabled. 2. Provide path for weak leakage from buffers of SD_CMD/D* signal to be grounded. Thus dropping voltage on the SD_CMD/D* signals to ~0V. BUG=chrome-os-partner:54421 TEST=no power leakage when SDCard isn't inserted on skylake platform Change-Id: I567199b172841125f8916a61a76005cfdaa62eb8 Signed-off-by: Zhuo-hao.Lee <zhuo-hao.lee@intel.com> Reviewed-on: https://review.coreboot.org/15910 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-29soc/intel/apollolake: Remove PEIM GFX from normal mode and S3 resumeAbhay Kumar
Do not pass VBT table to fsp in normal mode and S3 resume so that PEIM GFX will not get initialized. Change-Id: Iab7be3cceb0f80ae0273940b36fdd9c41bdb121e Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/14575 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28google/gru & kevin: Update DRAM configurationLin Huang
We need to enable DRAM ODT on kevin/gru board to improve the DRAM signal. Note, if the DRAM ODT is enabled and set to 120ohms, the sdram VREF need to adjust to 840mv. This patch also makes following changes: 1. For compatiblity with the old board, add the "sdram-lpddr3-hynix-4GB-666-no-odt.inc" and "sdram-lpddr3-hynix-4GB-800-no-odt.inc" files which do not enable sdram ODT. 2. Delete the 300MHz dram inc file. The 300MHz sdram config just reduced 666MHz to 300MHz based on the 666MHz config file, and it is not stable, so delete it. 3. Delete the 928MHz dram inc file, 928MHz sdram config still in debuging, delete it for now. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Change-Id: If0248e1bc4cef2c298762080f1ca018653af0521 Signed-off-by: Martin Roth <martinroth@chromium.org> Original-Commit-Id: 78d8a28e2d3489c99c9bba2c1c9aa76812e2e33f Original-Change-Id: I35f0685782d6fb178a95780ec77c45f565dd2194 Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358763 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/15813 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28rockchip/rk3399: sdram: correct controller vref settingLin Huang
When enabling the controller ODT, the controller vref needs to correspond with the ODT value and DQ drive strength. BRANCH=none BUG=chrome-os-partner:54871 TEST=run "stressapptest -M 1024 -s 1000" on kevin board and pass Original-Commit-Id: a7251c72b87d9f149b68d086c3252f1c668e0e80 Original-Change-Id: I7e54b3473f68a382208a0fb0b0600552fe6390ad Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/358762 Original-Commit-Ready: Dan Shi <dshi@chromium.org> Original-Tested-by: Caesar Wang <wxt@rock-chips.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Squashed with: rockchip/rk3399: Halt if we get an invalid odt or drv value When we were pushing the updated sdram.c to coreboot.org, the compiler there found that we were not initializing vref_value_dq in all code possible code paths. This patch updates those code paths to halt the system. Branch=none Bug=none Test=Built with coreboot.org toolchain and verified that the compile errors were gone. Change-Id: I0ad4207dc976236d64b6cdda58d10bcfbe1fde11 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/362726 Reviewed-by: Julius Werner <jwerner@chromium.org> Change-Id: I22a0cef6f12d9aae2ea4dcb99e7ebdd788f2cdd1 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/15812 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-07-28drivers/intel/fsp2_0: Update the copyrightsLee Leahy
Update the copyright dates in the FSP 2.0 files. Add a copyright to Kconfig. TEST=Build and run on Galileo Gen2 Change-Id: I0ad0c5650bde0e31d01a04bcc7d22a19273fe29b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15852 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-28google/reef: Write protect GPIO relative to bank offsetSusendra Selvaraj
Update the write protect GPIO reported in ACPI to GPIO_75. Also update the controller ID to "INT3452:01" which will point at the goldmont device and includes write protect GPIO. BUG=chrome-os-partner:55604 BRANCH=none TEST=verify crossystem output for wpsw_cur. Change-Id: Ibe6a013aaab18bfa2436698298177218ca934fab Signed-off-by: Susendra Selvaraj <susendra.selvaraj@intel.com> Reviewed-on: https://coreboot.intel.com/7929 Reviewed-by: Petrov, Andrey <andrey.petrov@intel.com> Tested-by: Petrov, Andrey <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/15691 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28soc/intel/apollolake: Update FSP Header files for version 146_30Brandon Breitenstein
Add new UPDs for Fspm and Fsps. Update headers to make new UPDs available for use. New UPDs enable various memory and trace funtionality options as well as support for zero sized IBB region. BUG=chrome-os-partner:55513 BRANCH=none TEST=built and tested with no regressions Change-Id: Id1573baaa306ed4fe4353df5f27e5963cb1a76e6 Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/15815 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28intel/apollolake: Update gnvs for dptfShaunak Saha
This patch updates dptf variable in gnvs based on device configuration by reading the device tree structure. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal in Amenia and Reef board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I8ab34cdc94d8cdc840b02347569a9f07688e92cd Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15620 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28intel/apollolake: Add soc specific DPTF valuesShaunak Saha
This patch adds apollolake soc specific change. DPTF ASL files are now in src/soc/intel/common so that they can be reused but different soc can have different values e.g., for skylake cpu soc thermal reporting device is at Bus 0, Device 4, Function 0 while for apollolake it is Bus 0, Device 0, Function 1. This patch adds a dptf asl file in soc directory where we can define all values which can change across soc's and can be included in mainboard dptf asl. BUG=chrome-os-partner:53096 TEST=In Amenia and Reef board verify that the thermal zones are enumerated under /sys/class/thermal in Amenia and Reef board. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I888260a9c799d36512411a769f26dd30cf8d5788 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15619 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28intel/common: Add ASL code for DPTFShaunak Saha
This patch adds the common ASL code for Intel platforms. This is the basic ASL needed to add support for DPTF controlled devices. We are moving these commmon ASL files to src/soc/intel/common/acpi as these are same codes used in all Intel platforms and hence no need to duplicate. BUG=chrome-os-partner:53096 TEST=Verify that the thermal zones are enumerated under /sys/class/thermal. Navigate to /sys/class/thermal, and verify that a thermal zone of type TCPU exists there. Change-Id: I01078382a9008263c6ad99f6bf07558885af6a63 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/15093 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28intel/common/opregion.c: only write 16 bytes to 16 byte fieldMartin Roth
Including the terminating null, 17 characters were being written to the field, overwriting the a byte of the size field. Fortunately, the size was updated soon after this. Fixes coverity warning 1229570 - Destination buffer too small. Change-Id: I39285a9283dd9a17d638afe5b2755c7e420d7698 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/15889 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-28arch/riscv: Refactor bootblock.SJonathan Neuschäfer
A few things are currently missing: - The trap handler doesn't set the stack pointer, which can easily result in trap loops or memory corruptions. - The SBI trampolin page (as described in version 1.9 of the RISC-V Privileged Architecture Specification), has been removed for now. Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15591 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Only initialize virtual memory if it's availableJonathan Neuschäfer
And do the detection just before the initialization. Change-Id: I9a52430262f799baa298dc4f4ea459880abe250e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15831 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Remove spinlock code from atomic.hJonathan Neuschäfer
These functions are not used anywhere. Change-Id: Ica1f4650e8774dd796be0aff00054f3698087816 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15829 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28intel/fsp1_1: Add C entry support to locate FSP Temp RAM InitSubrata Banik
FSP temp ram init was getting called earlier from ROMCC bootblock. Now with C entry boot block, it is needed to locate FSP header and call FspTempRamInit. Hence add fsp 1_1 driver code to locate FSP Temp ram and execute. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built kunimitsu and ensure FSP Temp Ram Init return success Change-Id: If40b267777a8dc5c473d1115b19b98609ff3fd74 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15787 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28skylake/devicetree: Add LPC EC decode rangeSubrata Banik
Define LPC decode ranges for EC communication. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu to ensure no EC timeout error Change-Id: Idefdd79e67e89a794195c6821fee16550d1eda53 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15898 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28skylake/mainboard: Define mainboard hook in bootblockSubrata Banik
Move mainboard post console init functionality (google_chrome_ec_init & early_gpio programming) from verstage to bootblock. Add chromeos-ec support in bootblock BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and boot kunimitsu till POST code 0x34 Change-Id: I1b912985a0234d103dcf025b1a88094e639d197d Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15786 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Add C entry bootblock supportSubrata Banik
List of activity performing in this patch - early PCH programming - early SA programming - early CPU programming - mainborad early gpio programming for UART and SPI - car setup - move chipset programming from verstage to post console BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x34 Change-Id: If20ab869de62cd4439f3f014f9362ccbec38e143 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/15785 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Do cache as ram and prepare for C entrySubrata Banik
Enable cache-as-ram and prepare for c entry in bootblock. BUG=chrome-os-partner:55357 BRANCH=none TEST=Built and booted kunimitsu till POST code 0x2A Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I3412216cdf8ef7e952145943d33c3f07949da3c1 Reviewed-on: https://review.coreboot.org/15784 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28soc/intel/skylake: Use init_vbnv_cmos from vboot vbnvFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I7a536bc1cab51e7c942b2e0e48dfe18d8de08a6e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15925 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28soc/intel/broadwell: Use init_vbnv_cmos from vboot vbnvFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie38cdbec513e2bb66e276399c8b4490cbe34a747 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15924 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28chromeos/gnvs: Clean up use of vboot handoffFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I40a28f921499ddf43d8b423f5192ac93b40254c1 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15903 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-28chromeos: Clean up elog handlingFurquan Shaikh
1. Currenty, boot reason is being added to elog only for some ARM32/ARM64 platforms. Change this so that boot reason is logged by default in elog for all devices which have CHROMEOS selected. 2. Add a new option to select ELOG_WATCHDOG_RESET for the devices that want to add details about watchdog reset in elog. This requires a special region WATCHDOG to be present in the memlayout. 3. Remove calls to elog add boot reason and watchdog reset from mainboards. BUG=chrome-os-partner:55639 Change-Id: I91ff5b158cfd2a0749e7fefc498d8659f7e6aa91 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15897 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28google/urara: Provide dummy implementations of rec/dev functionsFurquan Shaikh
This is required to enable elog support in ChromeOS by default. BUG=chrome-os-partner:55639 Change-Id: I9c97143d794de4bf220ddf67c0ca2eac2f7a326d Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15896 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/gale: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Idbad4f8763be18002907a62be755b2fdf7e479ec Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15895 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28qualcomm/storm: Add required files to enable elog in ramstageFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: Ie859ec3ff682e91a4d7d38d3c3cd6badf7385431 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15894 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28i2c/ww_ring: Add ww_ring files to ramstageFurquan Shaikh
These files are required by storm and gale boards for enabling elog support in ramstage. BUG=chrome-os-partner:55639 Change-Id: I2bbfee2acf2bfe2f896a8619b1276dcea1b87f16 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-07-28google/chromeos: Use vboot bootmode functions for elog add boot reasonFurquan Shaikh
BUG=chrome-os-partner:55639 Change-Id: I3ac2b256862758bb5c9e6c2f1311972af474e8f6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15870 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-28vboot: Separate vboot from chromeosFurquan Shaikh
VBOOT_VERIFY_FIRMWARE should be independent of CHROMEOS. This allows use of verified boot library without having to stick to CHROMEOS. BUG=chrome-os-partner:55639 Change-Id: Ia2c328712caedd230ab295b8a613e3c1ed1532d9 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15867 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-07-27drivers/intel/fsp2_0: Update MRC cache with dead version in recoveryFurquan Shaikh
If the system is in recovery, store the newly generated MRC data using a dummy version which is not legit. This ensures that on next normal boot, new MRC data will be generated and stored. BUG=chrome-os-partner:55699 Change-Id: Ib13e8c978dc1b4fc8817fab16d0e606f210f2586 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15828 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27soc/intel/common: Store MRC data in next available slot in the cacheFurquan Shaikh
Currently, coreboot performs an erase of the entire MRC cache region on flash if there is a version mismatch for the MRC data. Instead of doing that, store the new MRC data in the next available slot, if there is enough space available in the cache region. BUG=chrome-os-partner:55699 Change-Id: Ib24a94f0a47c79941ed9f60095360ae3aad5540b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15915 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27mainboard/google/slippy: remove unobtainable mainboardAaron Durbin
The slippy board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I24fb08d9be35b2367e7aa64520ce5778ab861535 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15902 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27mainboard/google/bolt: remove unobtainable mainboardAaron Durbin
The bolt board was a proof of concept device that has never made it out in the wild. Moreover, I don't think any of these boards exist any longer. Change-Id: I5ca055d448659a2b8e2eafcfc2114a6b8f8a56a4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15901 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-27soc/intel/apollolake: Disable monitor mwaitBora Guvendik
The monitor/mwait is broken on Apollolake. So use ACPI legacy mwait IO redirection as a work around BUG=chrome-os-partner:55110 Change-Id: I2e1834130d9586b4310466d3549d19bf427ffe24 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/15890 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-07-27Rename VB_SOURCE to VBOOT_SOURCE for increased clarityPaul Kocialkowski
This renames the VB_SOURCE variable to VBOOT_SOURCE in the build system, providing increased clarity about what it represents. Since the submodule itself is called "vboot", it makes sense to use that name in full instead of a very shortened (and confusing) version of it. Change-Id: Ib343b6642363665ec1205134832498a59b7c4a26 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15824 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-07-27chromeec: Use CHROMEEC_SOURCE with fallback instead of hardcoding pathPaul Kocialkowski
This introduces a CHROMEEC_SOURCE variable used for indicating the CrOS EC source path, with a fallback to 3rdparty/chromeec. This allows specifying an external path for the CrOS EC source path. Change-Id: I9792c7f21597127a385b961b65a00d44cfa37146 Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-on: https://review.coreboot.org/15765 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-07-27arch/x86: Add bootblock and postcar support for SOC MTRR accessLee Leahy
Quark does not support the rdmsr and wrmsr instructions. Use SOC specific routines to configure the MTRRs on Quark based platforms. Add cpu_common.c as a build dependency to provide access to the routine cpu_phys_address_size. TEST=Build and run on Galileo Gen2 Change-Id: I43b7067c66c5c55b42097937e862078adf17fb19 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15846 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27cpu/x86: Support CPUs without rdmsr/wrmsr instructionsLee Leahy
Quark does not support the rdmsr and wrmsr instructions. In this case use a SOC specific routine to support the setting of the MTRRs. Migrate the code from FSP 1.1 to be x86 CPU common. Since all rdmsr/wrmsr accesses are being converted, fix the build failure for quark in lib/reg_script.c. Move the soc_msr_x routines and their depencies from romstage/mtrr.c to reg_access.c. TEST=Build and run on Galileo Gen2 Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/15839 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-07-27nb/intel/x4x: Fix CAS latency detection and max memory detectionDamien Zammit
Now hardcode maximum memory frequency capability to 800MHz, as all chipsets in x4x family support PC2-6400 according to the datasheet. CAS latency detection also relies on this, and has been cleaned up. Ram initialization does not work with FSB 1333MHz / DDR2 800MHz combination, so disable this combination for now, and reduce to 667MHz instead. Still don't know why this is the case, but FSB1333/667 works. These changes should now allow existing configurations to continue working, while providing support for previously unworking configurations, due to previous buggy CAS latency detection code. TESTED: on GA-G41M-ES2L CPU: E5200 @ 2.50GHz (FSB 800MHz) 2x 1GB 667MHz hynix worked @ 667 1x 2GB 800Mhz ARAM worked @ 800 1x 1GB 667Mhz StarRam worked @ 667 2x 2GB 800Mhz (generic) worked @ 800 Change-Id: I1ddd7827ee6fe3d4162ba0546f738a8f9decdf93 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/15818 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-07-27device: include devicetree in bootblock stageAaron Durbin
Allow bootblock to get access to the static device tree like other early stages. device_romstage.c was renamed to device_simple.c to better articulate the usage since it's not just being used in romstage. BUG=chrome-os-partner:55357 Change-Id: I3d63d2754c737cc738c09a3e3b3b468362fb78d1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/15837 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins)