summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-06-23lynxpoint: Fix early EHCI BAR programmingKyösti Mälkki
LynxPoint LP has only EHCI controller #1. Change EHCI #2 to different BAR from EHCI #1. Even if the ECHI controllers are not to be addressed, it is bad idea to set two different devices to claim the same PCI memory cycles. Change-Id: I95c59fb9d5f09afd152872e9bc0418dc67e4aeb2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3472 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-22intel/sandybridge: Locate CBMEM TOC early in ramstageKyösti Mälkki
This patch allows the use of migrated CAR_GLOBAL variables from the very beginning of ramstage. Without the patch, CAR_GLOBALS were not available until northbridge set_resources(). Change-Id: Ifd4ab2ed52e07dcbe8c77e2e460dc483323e93c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3513 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-22Do CAR variable migration only onceAaron Durbin
Non-S3 resume paths of sandy/ivybridge call cbmem_initialize() more than once. Doing car_migrate_variables() more than twice caused at least loss of some lines in CBMEM console. Change-Id: Idd14aba9384984aa3a7d38937a4b3572aa5dc088 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3512 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-22Add support for DMP Vortex86EX PCI northbridge.Andrew Wu
Change-Id: I60675a357f9db430ebb59b17be6d8c92a9cadf43 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3511 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-22qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM.Denis 'GNUtoo' Carikli
This commit was tested on qemu with and without CONFIG_DYNAMIC_CBMEM by running cmbmem -c once booted. The qemu command that was used was: qemu-system-i386 -bios ./build/coreboot.rom -serial stdio -hda ../virt/parabola.img Note that using CONFIG_RELOCATABLE_RAMSTAGE make it fails like that: Loading image. CBFS: Decompressing stage fallback/coreboot_ram @ 0x3ffbefc0 (184400 bytes) Loading module at 3ffbf000 with entry 3ffbf000. filesize: 0x18db8 memsize: 0x2c050 Processing 1703 relocs with adjust value of 0x3ffbe000 FATAL: Essential component is missing. However without CONFIG_RELOCATABLE_RAMSTAGE set it boots fine. Change-Id: I633a8c3832eee4e8bed244940fdc370b98dd26f0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3504 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-21Add support to enable/disable builtin GbEStefan Reinauer
In case we are going to use this in future designs. BUG=none TEST=none BRANCH=none Change-Id: I750addf10e4fe6f8240f8c8262253f8af7027e29 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/55844 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3515 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-21Dynamic cbmem: don't compile src/lib/cbmem.c when dynamic cbmem is selected.Denis 'GNUtoo' Carikli
src/lib/cbmem.c is for the static cbmem. Thanks to adurbin for the Makefile.inc pointer and code on #coreboot IRC channel on freenode: <adurbin> no. if you have CONFIG_DYNAMIC_CBMEM then cbmem.c shouldn't be compiled [...] <adurbin> +ifeq ($(CONFIG_EARLY_CBMEM_INIT),y) <adurbin> +ifneq ($(CONFIG_DYNAMIC_CBMEM),y) romstage-$(CONFIG_EARLY_CBMEM_INIT) += cbmem.c <adurbin> +endif <adurbin> +endif Without that fix we have: src/lib/cbmem.c:58:43: error: no previous prototype for 'get_cbmem_toc' [-Werror=missing-prototypes] src/lib/cbmem.c:76:6: error: no previous prototype for 'cbmem_init' [-Werror=missing-prototypes] src/lib/cbmem.c:107:5: error: no previous prototype for 'cbmem_reinit' [-Werror=missing-prototypes] This commit was tested on qemu-i440fx with the following commit: qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM ( http://review.coreboot.org/#/c/3504/ ). Change-Id: I98636aad4bb4b954f3ed3957df67c77f3615964a Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3503 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-21bd82x6x: Fix early EHCI BAR programmingKyösti Mälkki
Change EHCI #2 to different BAR from EHCI #1. Even if the ECHI controllers are not to be addressed, it is bad idea to set two different devices to claim the same PCI memory cycles. Change-Id: Ib6f7cfac5acf3f8170508547d1584af90273e8c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3471 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-20fix bootstate typo (bs_dev_eanble -> bs_dev_enable)David Hendricks
Change-Id: I2e3fd58404c48e863a3a1b255337fb397086651b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3506 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-20Add initial support for DMP Vortex86EX CPU.Andrew Wu
Change-Id: I74de250c69a57109362be1b2f00c0b4aa24a64e8 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3473 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-20sandybridge: Store MRC cache in CBFSPatrick Georgi
Location is hard-coded right now, which isn't optimal. It must be chip erase block aligned, which might fail on some flash chips (it's 64k aligned which should work for most cases). Change-Id: I6fe0607948c5fab04b9ed565a93e00b96bf44986 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3497 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-19lenovo/t60: Collect timestamps in romstageNico Huber
Collect early timestamps in T60's romstage like some newer boards do. This should also work on X60s (and other ICH7 based systems with EARLY_CBMEM_INIT). Change-Id: I3b2872dd7423f3379ff3b68ad999523ec35fc08e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19intel/i82801gx: Store initial timestampNico Huber
Upgrade the ICH7 bootblock to store an initial timestamp like we do it since Sandy Brigde. I've checked the datasheets for the used scratchpad registers and grepped for their usage. I'm pretty sure that they aren't used on any ICH7 based board (for anything before the usual S3-resume indication). Change-Id: I28a9b90d3e6f6401a8114ecd240554a5dddc0eb5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3498 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19qemu: complete bochs dispi interface vga driver.Gerd Hoffmann
Ditch unused fb*.h files. Rename init.c (name is _way_ to generic) to bochs.c. Add proper bochs dispi interface detection and mode setup. Hook up coreboot framebuffer table initialization. Change-Id: I7154b1593902e7d42606b64819217872eee10683 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3500 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19edid: fix warningGerd Hoffmann
src/lib/edid.c:1177: error: ‘y’ may be used uninitialized in this function Warning is bogus, but seems my gcc (4.4.7 as shipped by RHEL-6) isn't clever enougth to figure this on its own. So help a bit by explicitly initializing the variable. Change-Id: Ia9f966c9c0a6bd92a9f41f1a4a3c8e49f258be37 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3501 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18winbond/w83627dhg: Correct resource setting for SPI (LDN6)Nico Huber
The SPI logical device on the W83627DHG uses the second i/o port register pair but not the first one. So we have to also set `io1` (the second io_info struct) and not `io0` in the pnp_info structure. Setting the PNP_IO1 flag without a mask in `io1` caused coreboot to hang in pnp_enable_devices() until commit aeead274 which added a check for an unset mask. Change-Id: I027d279b4641fecd88afb14d40fbe1c0bfbf81bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-18qemu/q35: uncomment cache-as-ram Kconfig entriesGerd Hoffmann
Change-Id: I8371764e3f2d16a3a776beb1c064f461b20a4262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3496 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17am335x: Add pinmux support based on the functions in U-BootGabe Black
I was unable to find documentation that said what mode numbers correspond to what functionality, so I translated over what U-Boot does. Change-Id: I34fab0f024fa2322d6bb66106aed75224e67354d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3489 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD: Use same sourcecode for reset in romstage as ramstageKyösti Mälkki
Confusingly, romstage compiled in different copy of soft_reset() than ramstage. Use source in reset.c for both. Change-Id: I2e4b6d1b89c859c7cf5d9e9c8f7748b43d369775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3487 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD boards: Clean use of Kconfig optionsKyösti Mälkki
The chip component is unconditionally selected for the mainboard so these uses are superfluous. Change-Id: I84b053ab47f7b1f68e88d968cf305e24bc95f4da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3485 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17Add support for XHCI (USB 3.0)Dave Frodin
CONFIG_HUDSON_XHCI_ENABLE will control the XHCI flags in the amd/parmer and asus/f2a85-m mainboards. The XHCI ports on amd/thatcher are not wired to USB jacks so always disable the flags. This was tested on amd/parmer using a USB 3.0 thumbdrive. Change-Id: I596b040fec30882d8d4dee34ab9f866dc1f8896b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3465 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17AMD Hudson: Add config option to enable XHCIDave Frodin
To have USB 3.0 support the XHCI controller needs to be enabled and the xhci.bin firmware needs to be added to CBFS. Change-Id: I0b641b30b67163b7dc73ee7ae67efe678e11c000 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3464 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Remove now plain wrappers for default PnP functionsNico Huber
After removing the enter()/exit() functions for configuration mode, most wrappers for our standard PnP functions just call the underlying default implementation. Remove those with a little cocci: @ op_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; type device_t; identifier dev; @@ static void op(device_t dev) { pnp_op(dev); } @@ identifier op_match.op; @@ -op(...) {...} /* Three rules to match the alignment, hmmp... */ @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .set_resources = op, + .set_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable_resources = op, + .enable_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable = op, + .enable = pnp_op, }; Change-Id: Idc0e52c7e3600a01f3b6a4e17763557b271b481e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Register implementations of enter/exit config stateNico Huber
Find all the (ramstage) implementations of enter()/exit() functions for the configuration state, register and call them through the new struct pnp_mode_ops. As our standard PnP functions are aware of the pnp_mode_ops, it's not necessary to call enter()/exit() around them anymore. Patch generated with the cocci below. It's not perfect. The movement of the enter()/exit() calls is somehow fragile. So I checked the remaining calls for sense, and changed some empty lines. Also a duplicate insertion of pnp_conf_mode_ops had to be removed. /* Try to find enter and exit functions by their outb() structure and their usage around calls to our standard pnp functions: */ @ enter_match @ identifier enter; identifier dev; type device_t; @@ void enter(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ exit_match @ identifier exit; identifier dev; type device_t; @@ void exit(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ pnp_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; identifier enter_match.enter, exit_match.exit; type device_t; identifier dev; @@ void op(device_t dev) { ... enter(dev); ... pnp_op(dev); ... exit(dev); ... } /* Now add enter/exit to a pnp_mode_ops structure: */ @ depends on pnp_match @ identifier enter_match.enter; identifier exit_match.exit; identifier ops; @@ +static const struct pnp_mode_ops pnp_conf_mode_ops = { + .enter_conf_mode = enter, + .exit_conf_mode = exit, +}; + struct device_operations ops = { ..., + .ops_pnp_mode = &pnp_conf_mode_ops, }; /* Match against the new structure as we change the code and the above matches might not work anymore: */ @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; /* Replace enter()/enter() calls with new standard calls (e.g. pnp_enter_conf_mode()): */ @@ identifier mode_match.enter; expression e; @@ -enter(e) +pnp_enter_conf_mode(e) @@ identifier mode_match.exit; expression e; @@ -exit(e) +pnp_exit_conf_mode(e) /* If there are calls to standard PnP functions, (re)move the enter()/exit() calls around them: */ @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ -pnp_enter_conf_mode(e); pnp_op(e); +pnp_enter_conf_mode(e); ... pnp_exit_conf_mode(e); @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ pnp_enter_conf_mode(e); ... +pnp_exit_conf_mode(e); pnp_op(e); -pnp_exit_conf_mode(e); @@ expression e; @@ -pnp_enter_conf_mode(e); -pnp_exit_conf_mode(e); Change-Id: I5c04b0c6a8f01a30bc25fe195797c02e75b6c276 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3482 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Implement common handling for PnP config modesNico Huber
Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Provide alternative pnp_enable() implementationNico Huber
The current default implementation of pnp_enable() only disables devices - if set so in the devicetree - but does not enable them. Enablement takes place in pnp_enable_resources(). Yet, many PnP chips implement their own version of pnp_enable() which also enables devices if set in the devicetree. It's arguable, if enabling those devices makes sense, before they get resources assigned. Maybe we can't write the resource registers if not, who knows? The least we can do is providing a common implementation for this behavior, and get rid of some code duplication. Used the following cocci: @@ expression e; @@ +pnp_alt_enable(e); -pnp_set_logical_device(e); ( -pnp_set_enable(e, !!e->enabled); | -(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0); | -if (e->enabled) { pnp_set_enable(e, 1); } -else { pnp_set_enable(e, 0); } ) Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3480 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17Make intel blob locations configurablePatrick Georgi
They were hard-coded to be copied from 3rdparty/ which isn't always the right choice. Since the defaults stay the same, this should be compatible. Change-Id: If2173bef86ad1fcf2335e13472ea8ca41eb41f3d Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17pnp: Unify some alignment to ease autogenerating patchesNico Huber
Most PnP drivers align the initialization of their `device_operations` with spaces. Unify this, so next autogenerated patches always match the alignment. Change-Id: I3f6baef6c8bb294c136354754125ea88c07a61a1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3479 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: i440fx whitespace fixupGerd Hoffmann
Change-Id: I0d499027ffb175638cba0a9830d6ec2041a139db Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3488 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add q35 supportGerd Hoffmann
Add support for the new q35 chipset emulation added in qemu 1.4. Change-Id: Iabfaa1310dc7b54c9d224635addebdfafe1fbfaf Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3430 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add support for memory above 4GGerd Hoffmann
Change-Id: Ic83f55d01b29b43028e3b363749d64b927db5489 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3492 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: move ram ressource reservation from "set" to "read" stageGerd Hoffmann
So the pci allocation code knows where memory is and doesn't try map pci devices there. We also don't have to check for overlaps between pci hole and memory then. Change-Id: I5eaea0e4d21210719685860fa1f16ca7b2137cde Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3491 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17cpu/amd/geode_lx/cache_as_ram.inc: Use $ for constant value instead of ↵Christopher Kilgour
memory reference An uninitialized RAM value was used to select an MSR because a $ was forgotten in front of `CPU_DM_CONFIG0`. It should be the constant value 0x1800, corresponding to CPU_DM_CONFIG0 MSR defined in `src/include/cpu/amd/lxdef.h`. Change-Id: Id53ca98b06cc4a9b55916fd8db23904f98008d45 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://review.coreboot.org/3478 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-06-14AMD sb800 agesa/hudson: Use PCI definesKyösti Mälkki
The original lines had contradicting comment and code. This change follows the code and sets MASTER bit too. Change-Id: Id2886bfc107612530f0e9747e5d49a9740fb8532 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3466 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-14qemu: move i440fx bitsGerd Hoffmann
Prepare tree for adding q35 support: Move emulation/qemu-x86 to emulation/qemu-i440fx. Rename some stuff to include 'i440fx'. Change-Id: Ib8c58175c5734cfcda1b22404ef52c09d38f0462 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3429 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-14usbdebug: Drop temporary disables of log outputKyösti Mälkki
With this patch, output on usbdebug also includes the section of MTRR setups for every CPU. This makes usbdebug output almost identical with that of serial port and CBMEM console. Tested with model_206ax. Also tested previously on model_f2x which does not have these disable/enable calls in model_f2x_init() without detected issues. Change-Id: Idfd0e93439907b17255633658195d698feab3895 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3423 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-14lynxpoint: Fix PCI IDs for EHCIKyösti Mälkki
IDs were leftovers from bd82x6x. Change-Id: I4ab6062929d346d7f000ce8c0b8c97490bb2b154 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3463 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-13AMD Hudson: Add support for the SD controllerDave Frodin
This patch provides the correct SD controller timings for the Family16 device. It also will remove the SD controller from PCI space when device 0:14.7 is set to off in devicetree. This was tested on a AMD Parmer board and a AMD G-series SOC reference board. The settings were found in the AMD Hudson2 RRG and family16 BKGD. Change-Id: I6d7e7997ddc39802ab75dc8a211ed29f028c0471 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3348 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13AMD S3 resume: use a function to replace duplicated codeSiyuan Wang
In function OemAgesaSaveMtrr of 'src/cpu/amd/agesa/s3_resume.c', there are many code like this: msr_data = rdmsr(0x258); flash->write(flash, nvram_pos, 4, &msr_data.lo); nvram_pos += 4; flash->write(flash, nvram_pos, 4, &msr_data.hi); nvram_pos += 4; Add a function write_mtrr to do this. Change-Id: Id6464e637db1758b07ac2d79d3be1375a8d49651 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3410 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13AMD Thatcher: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. Write 1 to clear as spec says. I have tested on Thatcher The same change was done for AMD Parmer in commit »AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard' (03901124) [1]. [1] http://review.coreboot.org/#/c/3347/ (Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1) Change-Id: Iaef39237497ef896d0f186e8f5522222c0ce6cb7 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3374 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13AMD: Kconfig cleanupKyösti Mälkki
Change-Id: I21182eae1d389790c330f27e6a830d91c3ee4eb6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3433 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-13Add support for Intel Nehalem CPUVladimir Serbinenko
Change-Id: I7ecc394b1e5bc0b8b85a8afac22efc0befe2d36a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3395 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13Revert "Add support for Intel Ibex Peak (Mobile 5) southbridge"Stefan Reinauer
This reverts commit 0210119b4b95e84f954cfd6dc11aafbc187421af Change-Id: I5be3f2a54394c592650a0dcd671e4a72ae796cb2 Reviewed-on: http://review.coreboot.org/3443 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-12Add support for Intel Ibex Peak (Mobile 5) southbridgeStefan Reinauer
Change-Id: If56f2cacc5f1b2ef9c7b6aea508d458a43dd1309 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3397 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Avoid tripping overheat alarm on X201 before ME bootsVladimir Serbinenko
Until ME boots (which takes seconds on X201) the reported temperature is 128 °C which triggers Linux overheat alarm which shuts down. Pretend temperature is 40°C until ME boots. Change-Id: Ia49fa03c6eb27f539a23711f2c8ebfde72b1dc18 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3404 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Make acpi/ec.c usable in romstageVladimir Serbinenko
On X201 to enable EHCI debug you need to go through EC if USB power is disabled so we need to inclue ec.c. Change-Id: I8f8b7de639ecaebceaa53cd338136befaeec8214 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3405 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12Radio and dock support in EC on X60 and X201Vladimir Serbinenko
Enable UMTS on Lenovo X60 and X201. Enable radios if no options are available. Enable dock on Lenovo X201. Based on my X201 branch. Change-Id: I6e8d3bbd6a6b1a8e59473dd5cc8125a1583d75df Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/3377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12am335x: Add struct `am335x_uart` for uart registersDavid Hendricks
Add a struct for referencing UART registers. The layout is quite strange on this chip, as the entire register space can take on three different meanings depending on the line control settings (in the LCR register) And to make things more confusing, some offsets reference different registers depending on if a read or a write operation is used. Change-Id: Ie62af9c0e0edafd01b81686a0fe5c5c1d4fa06c4 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3319 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12usbdebug: Quirk for board aopen/dxplplusuKyösti Mälkki
This ancient board with Intel e7505 invalidates cache while it does HW scrubbing for ECC in romstage. This breaks usbdebug console and prevents system from booting. If both EARLY_CONSOLE and USBDEBUG are selected, skip ECC scrubbing under these rare conditions to boot system. Change-Id: I6cb43bf69af54119f4a582dcaf498dd941d4c62d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3385 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-12usbdebug: Drop printk within console_init()Kyösti Mälkki
In case with EARLY_CONSOLE, this printk is called before any other console is configured to transmit data. This outputs garbage on CONSOLE_SERIAL as baudrate is not yet programmed. For case without EARLY_CONSOLE, the order in which different console drivers initialize is obscure. Might sometimes work properly. Change-Id: I3792161e0a6dc17e17262048cc9136044dd69dc5 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3384 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-12usbdebug: Improve solving EHCI debug port problemsKyösti Mälkki
Add comment how one can debug the usbdebug hardware init. Do not send printk's to usbdebug console when one is debugging the usbdebug console initialisation itself. Change-Id: I21a285cb31cf64e853bc626f8b6a617bc5a8be19 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3382 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-12Fix i82801a/b/c/d IOAPICKyösti Mälkki
Setting IRQ delivery to FSB got lost in the rebase process for commit e6143531. I captured following error on dmesg and this patch fixes it for i82801dx. ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found apic 0 pin 2) ... ....... failed. ...trying to set up timer as Virtual Wire IRQ... ..... works. Change-Id: I0768976cc6b0deab213ad9bd4771e0f278de634c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3371 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-12intel/*/smi.c: Output correct GPIO in ALT_GP_SMI_STS register dumpKonstantin Aladyshev
Mapping is as follows: bit 15 corresponds to GPIO15 ... bit 0 corresponds to GPIO0. Change-Id: I661ce56d9373887270ba3c0518892fbbe6d9de7c Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/3436 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11intel/bd82x6x/Makefile.inc: Revert duplicate addition of `usb_debug.c`Paul Menzel
Currently in Intel BD82x6x southbridge’s `Makefile.inc` the file `usb_debug.c` is added twice to the build. This was introduced in commit 4063ede3fb571110c3e65c321049cc2687cc54fa Author: Ronald G. Minnich <rminnich@google.com> Date: Mon Feb 4 20:31:51 2013 -0800 bd82x6x: Fix compiling with USB debug port support Reviewed-on: http://review.coreboot.org/2784 but was unneeded because it had been already added in the following commit. commit 4141993536039e0d45caeacb745a89d388f0724b Author: Sven Schnelle <svens@stackframe.org> Date: Sat Jul 28 08:52:44 2012 +0200 bd82x6x: Fix CONFIG_USBDEBUG Reviewed-on: http://review.coreboot.org/1376 Therefore basically revert that hunk. There is no policy on how to order these additions, so leave it to a possible separate commit, unifying this. Kyösti Mälkki suspects that these additions were meant for the Intel Lynx Point [1]. [1] http://review.coreboot.org/#/c/3424/ Change-Id: Iaa8de6fcc0d6f3a0a92a28fcb603d7777aa8b24c Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3425 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11Fix cycle error in intel southbridges to display GPI statusKonstantin Aladyshev
Fix obvious mistake in cycle that displays GPI status I hope i found all duplicates of it. Change-Id: Ic21ff3ecab85953463e5c23daf808dd5edc82ff8 Signed-off-by: Konstantin Aladyshev <aladyshev@nicevt.ru> Reviewed-on: http://review.coreboot.org/3435 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11am335x: Revert how the header load size is calculated to an earlier method.Gabe Black
The current method will treat hex values as 0 and would calculate the wrong size. This change switches back to an earlier method which used shell syntax to add the offset and size. Change-Id: I9fb2d9b323f113cc56a5ad2e38b47d2d22084f08 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3432 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-11winbond/w83627dhg: Add ACPI supportNico Huber
This is loosely based on Christoph Grenz' ACPI code for the W83627HF and makes use of the PnP super i/o ACPI framework. Change-Id: I5e1cd09b83c0041f440562d2a1b73e4560589cb7 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3288 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11Start ACPI framework for PnP (super i/o) devicesNico Huber
I'm trying to make writing ACPI code for super i/o devices more comfortable. pnp.asl hosts some general cpp macros. The other four files are to be included in dsdt trees. They are controlled by cpp macros which should be defined/undefined before inclusion. Work was inspired by Christoph Grenz' ACPI code for the W83627HF. Change-Id: Idb55332ba9bc788c98964d30a450e0d734cf28ec Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3286 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-11am335x: Make the iROM load only the bootblock and ROM stage.Gabe Black
The bootblock and ROM stages are the only ones that are really required to be loaded in the quite limited on chip RAM during startup. Rather than load the whole image which requires everything to be small, load just the bootblock and the ROM stage, allowing the rest of the image to be arbitrarily large. Loading a minimal amount of stuff should also improve boot performance a little bit. Change-Id: I2fede63b8d3d8f0d880e4a692ae423021f8232b6 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3421 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10beaglebone: Expand "ROM" size to 4MB.Gabe Black
Now that the ROM size is decoupled from the size of the on chip RAM, it's size is now only constrained by the size of the medium it's loaded from and the memory it's being loaded into, probably GBs in both cases. Making it 4MB is a reasonable compromise between giving the payload lots of breathing room and wasting space on the source medium which won't be used. Change-Id: I80932e0d4ce2dad02c3879345382e7d6ba44503a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3422 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10beaglebone: Force on every other user LED to show that coreboot is running.Gabe Black
Until we get serial working, this is a good way to show that coreboot is running. It can be removed once we have better methods. Change-Id: I62d25e52aa88a97aba4c959538d680b67a0bbbb2 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3329 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VX900: Use MIN/MAX from stdlib.h instead of redefining themAlexandru Gagniuc
Change-Id: I2dd693b300085493baa65bb652df8d6cce80b63b Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3431 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-10Add support for VIA EPIA-M850 boardAlexandru Gagniuc
EPIA-M850 can now boot linux. For a list of issues, see: http://www.coreboot.org/VIA_EPIA-M850 That's all folks. Change-Id: I7624944dbc05fbf3019897a116954d71dfda0031 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/1228 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VIA VX900: Add minimal ramstage needed to boot linuxAlexandru Gagniuc
This is the minimal code needed to get past ramstage, load SeaBIOS, jump to GRUB2, and boot linux (or load memtest). See individual source files for the status of each individual component. Change-Id: Ib7d5d7593c945f18af2c2fc5e0ae689ba66131a2 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3419 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VX900: Add DDR3 initializationAlexandru Gagniuc
The VX900 can be connected to either DDR2 or DDR3. On my board, it is DDR3, hence why there is no and will be no DDR2 code from my side. This is the raminit for DDR3 dimms for the VX900. I like the term "raminit" better than "memory training". This is a device, not a dog. What works and what doesn't is documented in the code. It does not make sense to hide that information in a commit message. Change-Id: Ib2ebc10e6d4d22d0a937fe9e895c17ce79153c88 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3417 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10ramtest.c: Add silent ram_checkAlexandru Gagniuc
In some cases, we want a ram_check that does not die and does not clobber the terminal with useless output that slows us down a lot. Usage examples include Checking if the RAM is up at the start of raminit, or checking if each rank is accessible as it is being initialized. As with all other ram_checks, this is more of a "Is my DRAM properly configured?" test, which is exactly what we want for something to use during memory initialization. Change-Id: I95d8d9a2ce1e29c74ef97b90aba0773f88ae832c Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3416 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10VX900: Add support for early romstageAlexandru Gagniuc
Add support for VX900 early initialization up until, but not including raminit. Add the basic infrastructure, add a romstrap table, and functionality to configure the CPU bus and SMBus. This code is necessary and sufficient to prepare us for raminit. Change-Id: Icc9c41e4927b589f17416836f87a6a5843b24aa7 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3372 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10early_smbus: Add early SMBus implementation for VIA chipsetsAlexandru Gagniuc
Add a common implementation of SMBus functionality for early chipsets. Note however, that existing via chipsets are not ported to this code. Porting will require hardware testing to make sure everything is fine. This code is used in the VIA VX900 branch. Change-Id: If5ad8cd0942ac02d358a0139967e7d85d395660f Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/144 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10am335x: Build an omap style header and an image with it at the front.Gabe Black
Loading on an OMAP SOC requires that the first sector of the image have a configuration header, and, when not an execute in place image, an additional header which describes how big the image is and where it should be loaded. This change adds some infrastructure to statically build that header using C code, and to paste the header onto the front of coreboot.rom in a new top level target file called MLO. The configuration header we're using is as inert as possible, in line with what U-Boot is doing. I think it could be used to give additional configuration parameters to the built-in ROM on the SOC, but we don't need to do that, and there didn't seem to be any actual documentation how to do that. Because the header is built from C and is defined per CPU, it would be possible to include extra settings in other CPUs if desired. Adding a new top level build target is a bit disruptive, but should be contained to the am335x directory and not interfere with other mainboards. Change-Id: I06d346a4050c20963b3c7c6e8a152070bf2d145a Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3332 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-10ARM: Put the ROM stage into the image before other bits.Gabe Black
On ARM, there's frequently some firmware built into the SOC which runs first and which loads other firmware like Coreboot from some other media. To prevent the bootblock from having to know how to find and load the ROM stage from what may be a complicated source (sd card, netbooting, etc.), we can put the ROM stage immediately after the bootblock and ensure that they're both loaded at the same time. This change adjusts the Makefile.inc for ARM so that the ROM stage is put into the image before any other files so that we know it comes first. This changes the behavior of the CONFIG_UPDATE_IMAGE config option used by abuild, although it's not entirely clear whether that's still used. Change-Id: I832386243788156db5f5abbc9760a4e2026cf2cd Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3420 Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Tested-by: build bot (Jenkins)
2013-06-10OT200: bring LEDs into a defined stateChristian Gmeiner
Keep in mind that we can _NOT_ read back the current state of the LEDS as some crazy FPGA designer wanted it that way. Change-Id: I5cd1ac598072318b3234d1ec35a79271655b46ac Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/3271 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-09fam15 vendorcode: Change license to BSD from AMD software licenseSiyuan Wang
fam15 vendorcode (src/vendorcode/amd/agesa/f15tn) was licensed under the AMD software license agreement. Change this license to 3-clause BSD. Change-Id: I7cab09bb58ef7cd24602628e2278672d577214a2 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-07usbdebug: Fix use without EARLY_CONSOLEKyösti Mälkki
If EARLY_CONSOLE is not selected, the PCI function for EHCI host controller must be configured in ramstage instead. Change-Id: I20f7569f79484c744bc413450bfa139052f3580f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3383 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-07Lenovo X60: Add int15 handlerDenis 'GNUtoo' Carikli
Without that commit, with CONFIG_PCI_OPTION_ROM_RUN_YABEL, The VGA option rom doesn't init the right display: it initializes the external display, where we have a black scren(with backlight on). This commit is based on the code of mainboard.c in src/mainboard/roda/rk886ex. Change-Id: I8457aaf0503e0efdf0fcba9ff5e8a07ac04c5ca6 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3265 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2013-06-07i945: Add Display defines for int15h handler.Denis 'GNUtoo' Carikli
Change-Id: I7bc99761c7047e64b4e29c307ad779cec49c17c8 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3306 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-06qemu: copy dsdt tables from SeaBIOS, adapt for coreboot and enable acpiGerd Hoffmann
First copy over from SeaBIOS git repo, then adapt for coreboot: Disable cpu/pci hotplug bits. Disable dynamic pci window. Both depend on stuff in the SSDT tables created by SeaBIOS. Bits are left in, but deactivated via #if 0, so it's easier to see the differences when diffing the coreboot tables with the SeaBIOS tables. Adapt dsdt DefinitionBlock. Enable acpi table generation in acpi_tables.c. With this patch linux boots successfully with ACPI enabled. It's not bug-free though. Missing cpu detection leads to funky messages like this one: weird, boot CPU (#0) not listed by the BIOS. and SMP most likely wouldn't work either. Change-Id: Ic3803a6f1ef6d54c11cc4ca3844d3032a374ae6b Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3342 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-06ec/acpi: Add ACPI methods for generic EC accessNico Huber
Port most of the functions found in ec/acpi/ec.c to ACPI Source Language (ASL). These functions are used to control embedded controllers with the standard ACPI interface (mostly through i/o ports 0x62 / 0x66). The following methods are implemented and tested against the power managements channels of a ITE IT8516E embedded controller: * WAIT_EC_SC Wait for a bit in the EC_SC register * SEND_EC_COMMAND Send one command byte to the EC_SC register * SEND_EC_DATA Send one data byte to the EC_DATA register * RECV_EC_DATA Read one byte of data from the EC_DATA register * EC_READ Read one byte from ec memory (through cmd 0x80) * EC_WRITE Write one byte to ec memory (through cmd 0x81) To use the provided methods, one should include `ec/acpi/ec.asl` in the EC device code. Prior doing so, two macros should be defined to identify the used i/o ports: * EC_SC_IO I/o address of the EC_SC register * EC_DATA_IO I/o address of the EC_DATA register Change-Id: I8c6706075fb4980329c228e5b830d5f4e9b188dd Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3285 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-06-06AMD Trinity: Remove unnecessary lookup table copyBruce Griffith
The DDI connector table and the PCIe Port List lookup table are copied onto HEAP. This copy is not needed since these are lookup tables used to define the platform configuration. Change-Id: If4760f80e08faa8da4fd11337a3812f89cf805f9 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3394 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06AGESA: Add "const" modifier to function parametersBruce Griffith
Add CONST modifiers to read-only pass-by-reference function parameters in AGESA. This allows the use of "const" modifiers on the declaration of lookup tables that are pass-by-reference. These will be used to identify tables that are copied onto the HEAP but don't need to be. Change-Id: Ie1187a427804fddf47b935a110ad23931a3447a9 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3393 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06qemu: wind up new cpu chipGerd Hoffmann
Add boot cpu to the device tree. Figure the number of CPUs installed (using the qemu firmware config interface) and add cpu devices for them, so they show up in all generated BIOS tables correctly. This gets SMP going. Change-Id: I0e99f98942d8ca90150b27fc13c1c7e926a1a644 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3345 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06qemu: add x86 cpuGerd Hoffmann
This patch adds a qemu x86 cpu chip. It has no initialization function as this isn't needed on virtual hardware. A virtual machine can have pretty much any CPU: qemu emulates a wide range of x86 CPUs (try 'qemu -cpu ? for a list), also with 'qemu -cpu host' the guest will see a cpu which is (almost) identical to the one on the host machine. So I've added X86_VENDOR_ANY as wildcard match for the cpu_table. Change-Id: Ib01210694b09702e41ed806f31d0033e840a863f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3344 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06ec/kontron/it8516e: Add it8516e EC driverNico Huber
This driver communicates with the IT8516e on the Kontron KTQM77. Since we don't know if the firmware and protocol are standard for the chip or customized to the board, call it kontron/it8516e. Change-Id: I7382172c6d865d60106c929124444821a07a5184 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3390 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06intel/bd82x6x: Add option to include ethernet firmwareNico Huber
Change-Id: Idf804ed29a67bad732df19e6981f74c8d0c354b5 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3388 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06intel/bd82x6x: fix building usb debug on SNB/IVBPatrick Georgi
Change-Id: Ica3afbf8277cb025251da7af181f8de0d0036b45 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3389 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-06(Trivial) early_smbus: fix printsmbus macroAlexandru Gagniuc
When I've first written this macro in 2011, the correct define for verbose SMBus message was CONFIG_DEBUG_SMBUS_SETUP. This has since been changed to CONFIG_DEBUG_SMBUS. I didn't catch that, and this made the printsmbus macro always evaluate to an empty statement. Use the proper CONFIG_DEBUG_SMBUS define. This makes printsmbus functional again. Change-Id: Iaf03354b179cc4a061e0b65f5b746af10f5d2b88 Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/3379 Tested-by: build bot (Jenkins) Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-06-05qemu: add power management function to device treeGerd Hoffmann
Needed to make 'register "gpo" = ...' work. While being at it add comments saying which device is which. Change-Id: I911d5e4a7b6c7abf4ad73e863ab201e9e55ee0d4 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3346 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: log qemu debugcon detection resultGerd Hoffmann
Change-Id: Ie0507475f33d029d6e8ce59f138e0e7da5156d4f Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3339 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: add qemu debugcon detectionGerd Hoffmann
The qemu debugcon port returns 0xe9 on reads in case the device is present. Use that for detection and write console output to the port only in case the device is actually present. Change-Id: I41aabcf11845d24004e4f795dfd799822fd14646 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3338 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05console: add qemu prefix to debugconGerd Hoffmann
Change-Id: Ibcc0a94638c022a76cd3c2e3387af6e1ab757ccb Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3337 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-05qemu: Initial support for the qemu firmware config interface.Gerd Hoffmann
qemu has a special device to pass configuration information from qemu to the firmware. This patch adds initial support the interface, namely some infrastructure, detection code and a function to query the number of CPUs. Change-Id: I43ff5f4fbf12334a91422aa38f514a82a1d5219e Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3343 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-05Revert "Asus F2A85-M: Activate IOMMU support"Paul Menzel
This reverts commit eed28f97b375a9469a2872996c19eb102647052e. For whatever reason, the dependencies were lost in Gerrit and the commit [1] was submitted without its dependencies. As a result buidling the ASUS F2A85-M fails now [2] and therefore commits based on this commit fail to pass the buid tests by Jenkins. […] Created CBFS image (capacity = 8387656 bytes) LINK cbfs/fallback/romstage_null.debug CC cbfs/fallback/coreboot_ram.debug coreboot-builds/asus_f2a85-m/generated/coreboot_ram.o:(.data+0x16b9c): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/coreboot_ram.debug] Error 1 make: *** Waiting for unfinished jobs.... coreboot-builds/asus_f2a85-m/mainboard/asus/f2a85-m/buildOpts.romstage.o:(.data+0x3d8): undefined reference to `GnbIommuScratchMemoryRangeInterface' collect2: error: ld returned 1 exit status make: *** [coreboot-builds/asus_f2a85-m/cbfs/fallback/romstage_null.debug] Error 1 […] Therefore revert the commit to get the tree working again and submit this patch with its dependencies again. [1] http://review.coreboot.org/#/c/3317/ [2] http://qa.coreboot.org/job/coreboot-gerrit/6618/testReport/junit/(root)/board/i386_asus_f2a85_m/ Change-Id: I911755884da09eb0a0651b8db07ee2a32e6eaaaa Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3373 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-05qemu: fix IRQ routing setupGerd Hoffmann
Do the setup for all PCI slots, not only the third. Also remove the bogus message, as slot 3 may carry any device, not only NICs. This makes IRQ setup simliar to SeaBIOS. SeaBIOS assignments (with patch for logging added, and a bunch of pci devices for testing purposes): PCI IRQ [piix]: bdf=00:01.3 pin=1 line=10 PCI IRQ [piix]: bdf=00:03.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:04.0 pin=1 line=11 PCI IRQ [piix]: bdf=00:05.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:06.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.0 pin=1 line=10 PCI IRQ [piix]: bdf=00:1d.1 pin=2 line=10 PCI IRQ [piix]: bdf=00:1d.2 pin=3 line=11 PCI IRQ [piix]: bdf=00:1d.7 pin=4 line=11 Coreboot assignments without this patch: Assigning IRQ 11 to 0:3.0 Coreboot assignments with this patch: Assigning IRQ 10 to 0:1.3 Assigning IRQ 11 to 0:3.0 Assigning IRQ 11 to 0:4.0 Assigning IRQ 10 to 0:5.0 Assigning IRQ 10 to 0:6.0 Assigning IRQ 10 to 0:1d.0 Assigning IRQ 10 to 0:1d.1 Assigning IRQ 11 to 0:1d.2 Assigning IRQ 11 to 0:1d.7 Change-Id: Ie96be39185f2f1cbde3c9fc50e29faff59c28493 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3334 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-05Intel 945: Select LAPIC_MONOTONIC_TIMER for X86EMU_DEBUG_TIMINGSDenis 'GNUtoo' Carikli
X86EMU_DEBUG_TIMING is needed for producing i915tool compatible output. So add its dependencies to the i945’s Kconfig in order to be able to use X86EMU_DEBUG_TIMINGS, which depends on HAVE_MONOTONIC_TIMER which LAPIC_MONOTONIC_TIMER provides/selects. Note that UDELAY_LAPIC is already selected by the Intel CPU. Change-Id: Ie834ebc92e527eb186a92b39341ebd0a08889fb0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3356 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Asus F2A85-M: Activate IOMMU supportRudolf Marek
Activate the IOMMU support for the Asus F2A85-M. Add the device to `devicetree.cb`. $ pci -s 0.2 […] 00:00.2 IOMMU: Advanced Micro Devices [AMD] Family 15h (Models 10h-1fh) I/O Memory Management Unit $ dmesg […] [ 0.000000] ACPI: IVRS 00000000bf144e10 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000) [ 0.000000] ACPI: SSDT 00000000bf144e80 0051F (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: SSDT 00000000bf1453a0 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bf145a52 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) […] [ 0.465114] [Firmware Bug]: ACPI: no secondary bus range in _CRS […] [ 0.567330] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000 [ 0.567364] pci 0000:00:00.2: >[1022:1419] type 00 class 0x080600 [ 0.567427] pci 0000:00:01.0: >[1002:9993] type 00 class 0x03000 […] [ 0.597731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.597899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT] [ 0.597933] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT] [ 0.597972] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT] [ 0.598073] pci0000:00: >Requesting ACPI _OSC control (0x1d) [ 0.603808] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.612397] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.620508] Freeing initrd memory: 14876k freed […] [ 0.882674] pci 0000:00:01.0: >Boot video device [ 0.882876] PCI: CLS 64 bytes, default 64 [ 0.897088] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA [ 0.905816] pci 0000:00:00.2: >irq 40 for MSI/MSI-X [ 0.917457] AMD-Vi: Lazy IO/TLB flushing enabled [ 0.922076] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.928500] software IO TLB [mem 0xbb13d000-0xbf13cfff] (64MB) mapped at [ffff8800bb13d000-ffff8800bf13cfff] [ 0.938535] LVT offset 0 assigned for vector 0x400 [ 0.943338] perf: AMD IBS detected (0x000000ff) [ 0.948037] audit: initializing netlink socket (disabled) [ 0.953432] type=2000 audit(1369659616.800:1): initialized [ 0.977011] HugeTLB registered 2 MB page size, pre-allocated 0 pages […] [ 7.881938] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) [ 7.881941] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF […] [ 7.885516] radeon 0000:00:01.0: >irq 48 for MSI/MSI-X [ 7.885525] radeon 0000:00:01.0: >radeon: using MSI. […] [ 8.276775] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae000 flags=0x0010] [ 8.287363] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc00 flags=0x0010] [ 8.297945] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae200 flags=0x0010] [ 8.308527] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae080 flags=0x0010] [ 8.319109] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae240 flags=0x0010] [ 8.329694] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001accc0 flags=0x0010] [ 8.340276] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace80 flags=0x0010] [ 8.350858] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd80 flags=0x0010] [ 8.361441] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae280 flags=0x0010] [ 8.372022] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae180 flags=0x0010] [ 8.382605] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace00 flags=0x0010] [ 8.393188] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acdc0 flags=0x0010] [ 8.403770] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ace40 flags=0x0010] [ 8.414353] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae1c0 flags=0x0010] [ 8.424936] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc40 flags=0x0010] [ 8.435518] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acc80 flags=0x0010] [ 8.446100] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae2c0 flags=0x0010] [ 8.456684] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae300 flags=0x0010] [ 8.467265] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae340 flags=0x0010] [ 8.477849] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae380 flags=0x0010] [ 8.488431] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae3c0 flags=0x0010] [ 8.499013] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae0c0 flags=0x0010] [ 8.509596] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acec0 flags=0x0010] [ 8.520179] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd00 flags=0x0010] [ 8.530761] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad000 flags=0x0010] [ 8.541343] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae400 flags=0x0010] [ 8.551925] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae440 flags=0x0010] [ 8.562509] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf00 flags=0x0010] [ 8.573090] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae480 flags=0x0010] [ 8.583675] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae100 flags=0x0010] [ 8.594257] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae4c0 flags=0x0010] […] [ 8.604840] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf40 flags=0x0010] [ 8.615421] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acd40 flags=0x0010] [ 8.626004] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad140 flags=0x0010] [ 8.636587] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad040 flags=0x0010] [ 8.647169] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad080 flags=0x0010] [ 8.657751] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae500 flags=0x0010] [ 8.668335] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad100 flags=0x0010] [ 8.678917] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad0c0 flags=0x0010] [ 8.689499] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acf80 flags=0x0010] [ 8.700080] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001acfc0 flags=0x0010] [ 8.710664] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae140 flags=0x0010] [ 8.721246] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae040 flags=0x0010] [ 8.731828] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad180 flags=0x0010] [ 8.742412] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae540 flags=0x0010] [ 8.752995] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad280 flags=0x0010] [ 8.763577] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad340 flags=0x0010] [ 8.774160] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad200 flags=0x0010] [ 8.784741] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad300 flags=0x0010] [ 8.795324] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae5c0 flags=0x0010] [ 8.805906] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae640 flags=0x0010] [ 8.816490] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad2c0 flags=0x0010] [ 8.827072] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad1c0 flags=0x0010] [ 8.837655] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad240 flags=0x0010] [ 8.848238] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae580 flags=0x0010] [ 8.858819] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae600 flags=0x0010] [ 8.869402] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad3c0 flags=0x0010] [ 8.879985] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ad380 flags=0x0010] [ 8.890568] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae7c0 flags=0x0010] [ 8.901151] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae740 flags=0x0010] [ 8.911732] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae6c0 flags=0x0010] [ 8.922316] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae780 flags=0x0010] [ 8.932897] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae700 flags=0x0010] [ 8.943480] AMD-Vi: Event logged [IO_PAGE_FAULT device=00:01.0 domain=0x0003 address=0x0000000f001ae680 flags=0x0010] [ 8.963011] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 8.963165] radeon 0000:00:01.0: >WB enabled […] It is not known, what the implications of the `IO_PAGE_FAULT` are. Change-Id: Ic5fde609322a5fdeb1a48052c403847197752a4b Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3317 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Yabel : Add tracing option needed by i915tool.Denis 'GNUtoo' Carikli
This patch was made by listenning to what Ron Minnich told me to do on #coreboot IRC channel on Freenode with my adaptations on top. i915tool is at https://code.google.com/p/i915tool/ , the one in coreboot is outdated. Change-Id: I13cd684f4c290114836fbd7babd461153e8d6124 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3277 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-04Move the MARK_GRAPHICS_MEM_WRCOMB to x86 architectureRonald G. Minnich
The MARK_GRAPHICS_MEM_WRCOMB was spreading like a cancer since it was defined in sandybridge. It is really more of an x86 thing however, and we now have three systems that can use it. I considered making this more general, since it technically can apply to PTE-based systems like ARM, and maybe we should. But the 'WRCOMB' moniker is usually closely tied to the x86. Change-Id: I3eb6eb2113843643348a5e18e78c53d113899ff8 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3349 Tested-by: build bot (Jenkins)
2013-06-04Lenovo X60: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback baud_rate = 115200 debug_level = Spew hyper_threading = Enable nmi = Enable boot_devices = '' boot_default = 0x40 cmos_defaults_loaded = Yes lpt = Enable volume = 0xff tft_brightness = 0xbf first_battery = Primary bluetooth = Enable The code for handling the invalid CMOS space in mainboard.c is now useless and so it was removed. Change-Id: Ic57a14eeeea861aa034cb0884795b0152757bf5b Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3335 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-04Asus M4A785T-M: Add CMOS defaults.Denis 'GNUtoo' Carikli
After removing power and the CMOS Battery, putting it back and booting coreboot we have: # ./nvramtool -a boot_option = Fallback last_boot = Fallback ECC_memory = Enable baud_rate = 115200 hw_scrubber = Enable interleave_chip_selects = Enable max_mem_clock = 400Mhz multi_core = Enable power_on_after_fail = Disable debug_level = Spew boot_first = HDD boot_second = Fallback_Floppy boot_third = Fallback_Network boot_index = 0xf boot_countdown = 0xc slow_cpu = off nmi = Enable iommu = Enable nvramtool: Can not read coreboot parameter user_data because layout info specifies CMOS area that is too wide. nvramtool: Warning: Coreboot CMOS checksum is bad. Change-Id: Idea03b9bc75c5c34c7ce521ce5e5a1c1bb6dfa96 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3324 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 22:30:51 +0000