| Age | Commit message (Collapse) | Author |
|---|
|
When the PHY is compiled to run in HDR(half data rate),
then either NOBUB or FXDAT must be set to 1 in the DDR
system general configuration register. NOBUB specifies
that reads should be returned to the controller with
no bubbles and this is felt preferable to the fixed
latency option (FXDAT). Both of them inrease read
latency.
BRANCH=none
BUG=chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly
Change-Id: Iee530ba5bb0acc889fba447dc2ee5cb965ba6926
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e7944b4af45d9504098f8b4af44d0f5abafea42c
Original-Change-Id: I9ced76bd670fc4efa7441d57e15f97871b046ae9
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264341
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9917
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DRAM configuration register, apart from holding the
device density and width also has a rudimentary address
mapping scheme. Currently this is set to the default
Bank/Row/Column. This means that the memory is segmented
into 8 chunks, each with a page detector. If all the
activity is in one section of memory then the other 7
page detectors could be idle.
Changing this to Row/Bank/Column would concatenate the
page detectors meaning that all 8 could be used by a
single initiator. This may not gain anything in a
synthetic bandwidth test but could yield extra performance
in a real world application or benchmark.
BRANCH=none
BUG=chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly; all access to DDR works properly in
Coreboot ramstage, Depthcharge and Linux;
no performance tests were ran so far.
Change-Id: I22d86bf3b679ed63884d7436d9d7bbaf1726f640
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e852ed42afcdc2062a0037144bab723227cb1f1f
Original-Change-Id: If90b0cf5ce86db5e3d6d362873d22d4269e3a49f
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264340
Original-Reviewed-by: James Hartley <james.hartley@imgtec.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9916
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add arm64_arch_timer_init function which should be called per CPU for
setting up the cntfrq register of arch timer. During the Linux kernel
bring up time, it will check the cntfrq register per CPU and should be
the same with the boot CPU.
BRANCH=none
BUG=none
TEST=bring up 4 cores in Linux kernel without warning message of cntfrq
register value
Change-Id: I9cb33a54c2c8f9115bbe545a2338ca8e249b8db6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 253cd3c68bb4513ae2033c12c2f070ee391e5a13
Original-Change-Id: I71068dbdd00a719145410ef6ec466f001ae837ad
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264244
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9915
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
secimage is a tool which adds a header and signature to the binary
first loaded by the soc. ARM core frequency is set to 1 Ghz.
BUG=chrome-os-partner:36421
BRANCH=broadcom-firmware
TEST=booted b0 board
Change-Id: Ia08600d45c47ee4f08d253980036916e44b0044a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36284d1b242c26b0b5aac2894f7ed1790da1ef15
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/197155
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Iaddd24006b368c8f37e075cb51e151e985029f3b
Original-Reviewed-on: https://chromium-review.googlesource.com/264417
Reviewed-on: http://review.coreboot.org/9914
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
BUG=None
TEST=emerge-foster coreboot
Change-Id: I383d2b5f269ed348065a9f270f80514a2ff45742
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fba6973c304e1612a9869c2e78a08650b6e5fe66
Original-Change-Id: I6d5d0098db8dbfb21529bf112a04b97779a0f381
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/264027
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9913
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Disables 4K regions in the MMU table.
Assumes that the region is already accounted for by the first level page table entry.
BRANCH=storm
BUG=chrome-os-partner:24786
TEST=verified mmu.pagetable.list output for Storm:
_______address___________|_physical________________|sec|_d_|_size____|_permissions____________________|_glb|_shr|_pageflags______________________|
C:00000000--00000FFF| | | | | | | | |
C:00001000--000FFFFF| A:00:00001000--000FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:00100000--29FFFFFF| A:00:00100000--29FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A000000--2A05FFFF| A:00:2A000000--2A05FFFF| ns| 00| 00001000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:2A060000--2A0FFFFF| A:00:2A060000--2A0FFFFF| ns| 00| 00001000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:2A100000--3FFFFFFF| A:00:2A100000--3FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:40000000--59FFFFFF| A:00:40000000--59FFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:5A000000--5A1FFFFF| A:00:5A000000--5A1FFFFF| ns| 00| 00100000| P:readwrite U:readwrite notexec| yes| no | strongly ordered |
C:5A200000--7FFFFFFF| A:00:5A200000--7FFFFFFF| ns| 00| 00100000| P:readwrite U:readwrite exec | yes| no | write-back/no write alloc |
C:80000000--FFFFFFFF| | | | | | | | |
Change-Id: Ib603da91966cc4c70ea9d5fee04f1e9890d0bb93
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 67db80e6476d8ed35f0a9d1e0d3ca03612b9d9be
Original-Change-Id: I6b149c7edbd975231b783cc53ddb63cf2e94052c
Original-Signed-off-by: Vikas Das <vdas@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/253800
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Deepa Dinamani <deepad@codeaurora.org>
Original-Commit-Queue: Deepa Dinamani <deepad@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9912
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Upstream coreboot regularly runs Coverity over the code base. Turns out
that's a good idea since it's really easy to screw yourself over with a
missing parenthesis and some unfortunately deceptive line breaking.
This patch fixes a bug in LPDDR3 initialization due to an incorrect
operator precedence assumption ( ?: does not bind stronger than | ). In
effect, instead of setting MR11[1:0] to 0b11 or 0b00 based on ODT, we're
unconditionally setting MR0[1:0] to 0b11. Thankfully, MR0[1:0] seems to
contain read-only bits so this might have not been a problem when ODT is
off (which is currently true for all LPDDR boards).
Also adding a redundant LPDDR_OP() around the 0 to make the intent
clearer and changing 3 and 0 to 0x3 and 0x0 to make it more obvious that
these are bit masks (right?).
BRANCH=veyron
BUG=None
TEST=Running reboot loop on a Minnie, looks good so far...
Change-Id: I06464aaa57e693b1973846a5771162244f7a1c57
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Found-by: Coverity Scan
Original-Commit-Id: 5bd9eba39fb7b0f940fead963bbc1878b031b2cb
Original-Change-Id: I701ce059472078b5de09a45dd31f54b65a51e641
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/264135
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Original-Tested-by: Jinkun Hong <jinkun.hong@rock-chips.com>
Reviewed-on: http://review.coreboot.org/9911
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
MEC cannot access memmap-range data directly though LPC and instead must
access through its EMI unit.
BUG=chrome-os-partner:38224
TEST=Verify host command functionality on glower.
BRANCH=None
Change-Id: If98d425014a894ddeafad4268f92af5860878522
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58ed3c50ab97ca1e172d5cdc00f4cd8e069e565c
Original-Change-Id: I32b897836d28ef4f3b3aa5f81b9023f2ceb629c8
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263611
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9910
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Rather than calling inb + outb directly, access the ports through common
functions. This is in preparation for alternative access modes required
by certain new embedded controllers.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Verify system boots cleanly in normal mode.
BRANCH=None
Change-Id: I98783ff67a37d970019683bb589825bc5d68c033
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 25afa3f95183d8cf2e9a35272c77e92fbc6ee030
Original-Change-Id: Ic9d8f7f5c5d392212e39db28ebceea461d46f796
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263571
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9909
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:35810
BRANCH=purin
TEST=Enable I2C1, reset devboard codec, read a register.
Here is the code that demonstrates how I2C works:
i2c_init(1, 100*KHz);
mdelay(50);
int rc = i2c_writeb(1, 0x18, 1, 0x80); // reset codec
printk(BIOS_INFO, "I2C reset rc=%d\n", rc);
mdelay(50);
uint8_t data = 0;
rc = i2c_readb(1, 0x18, 43, &data);
printk(BIOS_INFO, "I2C read rc=%d data=%x\n", rc, data); // data == 0x80
Change-Id: I0d202f8b0375b5ccd9f71b23fb0cadd5a70ae779
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6bbe9afe3dccd104f39c2c286d3765a28ea20141
Original-Signed-off-by: Anatol Pomazau <anatol@google.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/195706
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Reviewed-by: Anatol Pomazau <anatol@google.com>
Original-Commit-Queue: Anatol Pomazau <anatol@google.com>
Original-Tested-by: Anatol Pomazau <anatol@google.com>
Original-Change-Id: I178acef9de18fa854983294edcd2c05886795e2a
Original-Reviewed-on: https://chromium-review.googlesource.com/263496
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9908
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:35936
BRANCH=broadcom-firmware
TEST=When enable configuration CYGNUS_GPIO_TEST,
print on console:
Start gpio test...
[gpio_crmu] gpio:0 set input
[gpio_crmu] gpio:0 set pullup:0
GPIO get 170=0
gpio request enable pin=64 offset=0x1c
....
GPIO set 69=1
[gpio_asiu] gpio:45 set, value:0
GPIO set 69=0
Gpio test completed...
Additional test:
Measure on GPIO 69 to confirm the voltage
change.
Apply voltage on AON_GPIO0 to check reading.
Change-Id: I634cffccc7f0fa198317a92e3f1670ae6828892e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4784e5d88b9f7acb70bd6f6b12b1096f092f34b8
Original-Signed-off-by: Icarus Chau <ichau@broadcom.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204537
Original-Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: Ia4f833be80d7844c2d014c9ffcf587d385e7766c
Original-Reviewed-on: https://chromium-review.googlesource.com/263495
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Trybot-Ready: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9907
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch switches the mainboards with board id straps
to use BOARD_ID_AUTO instead of BOARD_ID_SUPPORT.
On urara, which does not have those straps, the option is
removed. (And re-added for urara derivatives through setting
the config option BOARD_ID_MANUAL
BRANCH=none
BUG=chrome-os-partner:37593
TEST=emerg-nyan_big coreboot, emerge-urara coreboot, emerge-buranku coreboot
Change-Id: I5ac4024c6f1f9b9d7a5179d88722c69b23b82bbd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 22a470698f9c9ed275aa8150a5bb8d8cf368b050
Original-Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Change-Id: I48c291ad6f255a28c833bebc2638bfafa2782e74
Original-Reviewed-on: https://chromium-review.googlesource.com/262935
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: http://review.coreboot.org/9906
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds manual board id support to coreboot and
selects manual board ids vs automatic (ie strap based)
where appropriate in the mainboards.
CQ-DEPEND=CL:262935
BRANCH=none
BUG=chrome-os-partner:37593
TEST=emerge-urara coreboot, see no board_id file
emerge-buranku coreboot, see board_id file
Change-Id: Ia04e5498a01f35c5418698ecaf3197f56415e789
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3bdb1fa092005be24de9fc68998053982648da85
Original-Change-Id: I4f0820233a485bf92598a739b81be2076d4e6ae7
Original-Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262745
Original-Reviewed-by: Vadim Bendebury <vbendeb@google.com>
Reviewed-on: http://review.coreboot.org/9905
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add support to display class and subclass names for PCI devices.
BRANCH=none
BUG=None
TEST=Build and run on strago/cyan.
Change-Id: I5136fae45b8a1cd02541f233d29a246cdfcd8331
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a7c9b0d7201b09a06ea32f0db84187d15f767c80
Original-Change-Id: Ibf2ee89dd84040ca6ab0e52857a69f7ed0c28f37
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/263342
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9901
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The code guarded by BOARD_ID_SUPPORT does not use this library.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BRANCH=none
BUG=none
TEST=emerge-storm coreboot succeeds in building an image.
Change-Id: If8c5c326265441f0c10999e3882706432139fd89
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f49b89e0b03f482a30dc652e5956494fb994cc70
Original-Change-Id: Ie2cd2cd049fdb20fa5cc368bee08babd3f7a551c
Original-Reviewed-on: https://chromium-review.googlesource.com/262744
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9900
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BOARD_ID functionality is not what requires the GPIO lib,
but it is the mainboard specific implementations that do.
The option essentially says whether the SoC provides
<soc/gpio.h> (with the interface required by the common
GPIO code). Right now, x86 and Samsung's Exynos SOCs
don't have support for this interface.
So this should be selected by the SOC, not by
BOARD_ID_SUPPORT.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=none
BRANCH=none
TEST=emerge-storm coreboot still successfully compiled an image
Change-Id: I0ce2bd7ce023f22791d31a6245833b61135504b3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0dd4dea521372194eedf11b077d95fd3b15ad9f7
Original-Change-Id: I3dea6c2fb42a23fcb9d384c3bbfa7fc8e217be2d
Original-Reviewed-on: https://chromium-review.googlesource.com/262743
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9899
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to allow proper working of caches, set the correct
shareability option for normal memory.
BUG=chrome-os-partner:38222
BRANCH=None
TEST=Compiles successfully for foster and SMP works.
Change-Id: I5462cb0a2ff94a854f71f58709d7b2e8297ccc44
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e092916780716ac80c3608c1bd8ca2901fbb3bd1
Original-Change-Id: Idd3c096a004d76a8fd75df2a884fcb97130d0006
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262992
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9898
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Invoke the function which copies MAC addresses from VPD into the
coreboot table and calibration data into CBMEM.
BRANCH=none
BUG=chrome-os-partner:36584
TEST=with the rest of the patches applied observed that the MAC
addresses from VPD get copied into the appropriate kernel device
tree nodes.
Change-Id: I68e2b73520853ef2d3249ca12ee87669fd01f442
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f935098c50e2df345748d3b71cee2152acd422
Original-Change-Id: I6e1483d33480d13380ade2dddae6c92fd3f1f881
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262844
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9897
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
coreboot is expected to read all MAC addresses from the VPD and put
them in the coreboot table entry, depthcharge is expected to associate
different MAC addresses with different kernel device tree nodes.
This patch adds processing of wifi_macX keys. The order of MAC
addresses in the coreboot table is such that the wifi_macX entries
follow ethrnet_macX entries, ordered by X.
BRANCH=none
BUG=chrome-os-partner:36584
TEST=with the rest patches applied verified the contents of the kernel
device tree on an urara board.
Change-Id: I6523e168d2fea201a4956bc2a2d605b07ddac452
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36c12ee1d3ce9d2797902f0e098651067c2283ed
Original-Change-Id: Ib87e4815243f34ab258325839cbc12d16120bf89
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262843
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9896
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The preferred way of communicating WiFi calibration data to the kernel
is binary blob. But this data is stored in the VPD, and must be in
ASCII, so it is encoded using base64.
With the recent addition of the bas64 decoder it is possible to
convert the VPD representation to the form preferred by the kernel.
BRANCH=none
BUG=chromium:450169
TEST=with the rest of the patches applied verified that on both storm
and urara the device tree contains the required binary data.
Change-Id: I89da94bb425767eedc5e2d576e507663afad65ed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c2ae38ded24394e0640b5d077e2231cf956397c5
Original-Change-Id: If8a7d0883ea8bb21a13bf203b25ee9f8a08903a9
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262842
Reviewed-on: http://review.coreboot.org/9895
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CBFS cache use is very close to the limit, does not allow to read much
more from CBFS.
BRANCH=none
BUG=chrome-os-partner:36586
TEST=the upcoming patches do not fail due to the lack of room in CBFS
cache any more
Change-Id: I8e784891e59ca284b3bd82557c2114a2f450d8a3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c94d55c8042db81c1eb0c10d5f24883e00cdc19a
Original-Change-Id: Ic09dbd5b4a0e165ccef396ff8a9e21b12c49b705
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/263268
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9894
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If CONFIG_EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is set, access to memmap data
should go through the ACPI CMD / DATA ports.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Define EC_GOOGLE_CHROMEEC_ACPI_MEMMAP. Verify
system boots cleanly.
BRANCH=None
Change-Id: I9d19704df259f5a25e04a9b07b23968e93fe6302
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d0b59b040a7889d2d1bd6eeaf57dd960bd29927d
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: I405e28828457a1fd83a7ece7192a7e7d0a37be95
Original-Reviewed-on: https://chromium-review.googlesource.com/262932
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9893
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It became necessary to decode base64 data retrieved from VPD and
convert it into binary for inclusion in the device tree.
The patch introduces the decoder function based on the description
found in http://en.wikipedia.org/wiki/Base64.
An open source implementation from http://base64.sourceforge.net was
considered, in the end the only thing borrowed from it is the table to
translate base64 ascii characters into numbers in 0..63 range.
BRANCH=none
BUG=chromium:450169
TEST=created a test harness generating random contents of random size
(in 8 to 32766 bytes range), then converting the contents into
base64 using the Linux utility, and then converting it back to
binary using this function and comparing the results.
It succeeded 1700 iterations before it was stopped.
Change-Id: I502f2c9494c99ba95ece37a7220c0c70c4755be2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6609f76e1559d3cdd402276055c99e0de7da27c8
Original-Change-Id: I5ed68af3a4daead50c44ae0f0c63d836f4b66851
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262945
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9892
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch increases the SPI clock for the ROM to 24.75MHz on all rk3288
(veyron) boards. This increases flash read speeds (and thereby decreases
boot time) significantly, but we don't seem to get any more increases by
going even higher. We have also seen occasional read failures at higher
speeds in certain configurations, so this frequency seems to be the best
option.
BRANCH=veyron
BUG=chrome-os-partner:38352
TEST=Booted on Jerry with Servo attached.
Change-Id: I9bdb62eff169fe2be33558caafe9891668589372
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a1d07da4266f2922b076dfae8396c24c6a84252b
Original-Change-Id: If3fd96c8cb5648d12fc4ee56fb6b6d5f3a0bf720
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262645
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9889
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The hardware initialization is now split in basic
initialization (MIPS and system PLL, system clock,
SPIM, UART), and initialization of other hardware
blocks (USB, I2C, ETH). The second part uses board ID
information to select setup that is board specific
(currently only I2C interface is selected through
board ID).
BRANCH=none
BUG=chrome-os-partner:37593
TEST=tested on bring up board for both Urara and Concerto;
to simulate the use of Concerto (I2C3) DIP SW17 was
set to 0.
it works with default settings on Urara
Change-Id: Ic5bbf28ab42545a4fb2aa6fd30592a02ecc15cb5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f2b3db2e7f9fa898214f974ca34ea427196d2e4e
Original-Change-Id: Iac9a082ad84444af1d9d9785a2d0cc3205140d15
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/257401
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9888
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The code to calculate the RK3288 SPI controller's internal clock divisor
is wrong: it assumes that the divisor register was an "n-1" divisor when
it actually isn't (due to some misleading kernel code that was copied in
here). This means that all SPI clocks are currently running lower than
expected.
This patch fixes the calculation and changes all callers such that the
effective speeds stay the same.
BRANCH=veyron
BUG=chrome-os-partner:38352
TEST=Booted Jerry with and without the patch, dumping the divisor for
flash and EC clocks. Made sure it stays the same.
Change-Id: I2336e2b81c2384b5076175fcf32717a3ab2ba0c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1fd5b990f937019a9bee7bd693c91d6e2fca1adb
Original-Change-Id: I094d57a5933c8b849f5c66194e6cc2952ab68b90
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262269
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9887
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some platforms cannot access the 900h-9ffh region over the LPC bus, so
it's necessary to access memmap data over the ACPI cmd / data ports.
BUG=chrome-os-partner:38224
TEST=Manual on Samus. Define EC_GOOGLE_CHROMEEC_ACPI_MEMMAP. Verify
system boots cleanly and battery status is updated immediately on plug /
unplug.
BRANCH=None
Change-Id: Ifbed938668d3770750a44105e40fccb9babf62ed
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 14762261a6a32b2e96ee835e852b2c9537436ae3
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Change-Id: Idb516ff60b973d8833a41c45eac5765dafb8ec6d
Original-Reviewed-on: https://chromium-review.googlesource.com/262314
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/9886
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:38224
TEST=Compile for Samus
BRANCH=None
Change-Id: I9bb7ed100b876cbd50d39f5c5ad599e4bd7be6b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca8fbf8ed91d95486f0c8db680e8ceabca597a3a
Original-Change-Id: I250fcce67f6103cf3037b416b8e74dd4a2cea780
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/262313
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9885
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
BUG=None
TEST=build coreboot, make sure there are fmov instructions
generated by the compiler, and boot to kernel
Change-Id: Ia99c710be77d5baec7a743a726257ef3ec782635
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f770a436a0692c8e57a8c80860a180330b71e82c
Original-Change-Id: Iab4ba979b483d19fe92b8a75d9b881a57985eed7
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/262242
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9884
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the serial number from VPD on ryu.
BRANCH=none
BUG=chrome-os-partner:37813
TEST=devicetree is populated with "compatible", "hardware",
and "serialno" properties
Change-Id: I1e84933a01a34028a062d31aad026f91c3bd29e1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 18cefb655651c9097ff7f2ef3cb735efbbe32370
Original-Change-Id: I14439c37df0fde7f2328c7caae1adf6a122e8f5f
Original-Signed-off-by: Stephen Barber <smbarber@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260646
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9883
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=none
BUG=chrome-os-partner:37813
TEST=devicetree is populated with with "compatible", "hardware",
and "serialno" properties
Change-Id: Ibe84aa05702d2a33456c6c33d15a4c7d4a6d45d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 61408d969f5d6e1e40f919b3defd5f1622391c9e
Original-Change-Id: I02f360f4e5385042f56eb2b2f29072e393a24fc9
Original-Signed-off-by: Stephen Barber <smbarber@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/259141
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9882
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On embedded devices with limited input capabilities it is necessary to
clear the developer mode condition when entering recovery. The new
configuration option will enable such behavior using the new vboot2
flag.
CQ-DEPEND=CL:261630
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=with the rest of the patches applies observed desired behavior on
SP5
Change-Id: I99c3d1330bea9980a2af3b9fd99e29ab96f2cf07
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c0a6315d6b4ede8d43e736ee6c82f1023f4716d
Original-Change-Id: I8e4a521e574b53a670daf692f7b45dc21635f272
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261620
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9878
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It is better to explicitly disable the call to read the physical
switch setting than to leave it up to implementation. In fact no
implementation would be even required.
BRANCH=none
BUG=none
TEST=verified that storm works as expected
Change-Id: I4b39827dba34ec0124960d0634e45d4554252d9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c9fd014f1bfec6570b20ed8fed16d14d7e4e11b9
Original-Change-Id: I5d6d223f0c684e105a5e3d0b407e0fb181c7a7df
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/261588
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9876
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BRANCH=None
TEST=Boot from veyron
BUG=None
Change-Id: Ie154d233f144bde2625cf069b9b754e9518a1768
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0ddd03f8757b5122f6ca87baffdf95c46e356e53
Original-Change-Id: I725cfb04ff46f7e6493e0e12a464c45b1362bc1a
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/261083
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9874
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to not duplicate the instruction cache invalidation
sequence provide a common routine to perform the necessary
actions. Also, use it in the appropriate places.
BUG=None
BRANCH=None
TEST=Built on ryu.
Change-Id: I29ea2371d034c0193949ebb10beb840e7215281a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5ab28b5d73c03adcdc0fd4e530b39a7a8989dae
Original-Change-Id: I8d5f648c995534294e3222e2dc2091a075dd6beb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260949
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9871
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These Kconfig options provided a level of configurability that is
almost never necessary, so they are being moved into ordinary
preprocessor defines in elog_internal.h. The new threshold to
trigger shrinking is relative to the number of additional
(maximum-size) events that can fit, and the new target
post-shrink size is a percentage of the total ELOG area size.
BUG=chromium:467820
TEST=Add loop at the end of elog_init() that fills the ELOG area
to just below full_threshold with dummy events. Observe
successful shrinkage when the next event is logged.
BRANCH=None
Change-Id: I414c4955a2d819d112ae4f0c7d3571576f732336
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ce439361e3954a2bf5186292f96936329171cf56
Original-Change-Id: I926097f86262888dcdd47d73fba474bb2e19856a
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/260501
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9869
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The old parameters are wrong. K4B8G1646Q: rank = 2, row = 15 is right.
BUG=None
TEST=Boot from veyron
BRANCH=None
Change-Id: I41848c158f3ea028035cc8c0d969a4a449390a54
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 601ba06c636ff0f0779e6ef9357b53060a1ec19b
Original-Change-Id: I5bc6798890b3ba0f5134d048ae6bbf2bfd696676
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/260483
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Paul Ma <magf@bitland.com.cn>
Reviewed-on: http://review.coreboot.org/9866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
in depthcharge we will use "backlight" gpio which in lb_gpio table
to control backlight, we use lcd_bl before, but it will not meet
the backlight power sequence, so we change it to bl_en.
BUG=chrome-os-partner:37348
TEST=Boot from speedy, and backlight work well
BRANCH=None
Change-Id: I19e488c7d3f1fe5cb91f8a93fae6b848f58b36b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cb594ce612e1cedeabced4531fbd954f3698da98
Original-Change-Id: Ib0dac7c48bce7d0b28ec287b32d8c5bad575893f
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/259900
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9864
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It has become necessary to be able to "factory reset" certain devices
on firmware request.
The vboot package has been modified to provide the necessary API, this
patch introduces a configuration option and uses the API when
enabled.
CQ-DEPEND=CL:259857
BRANCH=storm
BUG=chrome-os-partner:37219
TEST=with all the patches applied, on storm, holding the recovery
button at startup for 10 seconds, causes 'crossystem
wipeout_request' to report '1'.
Change-Id: I5e57bc05af3753f451626021ba30c7726badb7b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f70e03e9a8c55bf3c45b075ae4fecfd25da4f446
Original-Change-Id: I4c2192da4fabfdef34d527e5b80d137634eb6987
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/259843
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9862
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
DDR init blob version string can be found at a fixed location in
memory once the blob is loaded. Maximum size of the string is 48
bytes.
The RPM RW version is defined in a 32 bit version stored at yet
another fixed address once RPM RW has started.
BRANCH=storm
BUG=chrome-os-partner:30623
TEST=ran this command on the booted system:
localhost ~ # egrep '(DDR|RPM)' /sys/firmware/log
Loaded DDR init blob version 99ce41d@-AAABANAZA
DDR initialized
Starting RPM
Started RPM version 1.0.128
localhost ~ #
Change-Id: If3c3c8368845b978605ccfda7e09c21ae2e5ab9a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 328c9c57cf93110bc0fdd267134d72e386d70834
Original-Change-Id: If411f6f7bca53ea20390b7e851cb3d120681eade
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/256738
Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Reviewed-on: http://review.coreboot.org/9860
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
SP5 whirlwind is the earliest hardware version equipped with the LED
ring.
BRANCH=storm
BUG=chrome-os-partner:36059
TEST=none
Change-Id: I4c90a75911350bafd8ccb8755b2491e9447f285b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3dfee90457295668a2b60d5a1e913caf52557877
Original-Change-Id: I6bffdcc47fe9c72796e3bac44d211f907538ef0b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/258270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9857
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Concerto board does not have the means of detecting the identity of
the device it is controlling. But it is very beneficial to be able to
use the same firmware image on Concerto boards running different
devices.
The suggested solution is to keep the device identity as a string in a
raw CBFS file called 'board_id'.
With this patch coreboot maintains a table of possible board name
strings and their matching board IDs.
BRANCH=none
BUG=chrome-os-partner:37593
TEST=verified that without the board id file addition the default
Board ID of zero is used. Adding the file as follows:
echo -n 'concerto' > /tmp/bid
cbfstool /build/urara/firmware/image.serial.bin add -f /tmp/bid \
-t raw -n 'board_id'
results in firmware reporting board ID setting of 1.
board_id: failed to locate CBFS file board_id
board_id: name urara, ID 0
Change-Id: I5a02192740dc94b1ea8090092cc325fe0ac42aa6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f41f9b07f155f0c719c36e0cd93081205624557e
Original-Change-Id: I8341782005b101be78f5c9a6b375c8f73179c1ad
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/257170
Reviewed-on: http://review.coreboot.org/9856
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
BRANCH=broadcom-firmware
TEST=timestamp table:
0501: 31858
0005: 106680
0503: 132098
0504: 135573
0006: 168656
0013: 168660
0014: 240487
0502: 240491
0001: 240515
0002: 247544
0003: 537158
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://chrome-internal-review.googlesource.com/204758
Reviewed-by: Julius Werner <jwerner@chromium.org>
Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Change-Id: I5b4608152e97d53e35d28aa7bed2bfd158409df9
Reviewed-on: https://chromium-review.googlesource.com/256418
Reviewed-on: http://review.coreboot.org/9855
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=none
BRANCH=broadcom-firmware
TEST=boot to depthcharge
Change-Id: Id10437c12e219e07121395abd442d53b3b56c7be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f33e9218ca8df1d149761c09253c30837b607433
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/204757
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@google.com>
Original-Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: I93def9c326cc8b4fea69078987bddf09d9f2a797
Original-Reviewed-on: https://chromium-review.googlesource.com/256417
Reviewed-on: http://review.coreboot.org/9854
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:36456
BRANCH=broadcom-firmware
TEST=When enable configuration CYGNUS_SDRAM_TEST_DDR,
print on console:
sdram initialization is completed.
test ddr start from 0x60000000 to 0x80000000
...
test ddr end: fail=0
Translation table is @ 02004000
Mapping address range [0x00000000:0x00000000) as uncached
Change-Id: I88dc2f0c504e2a152133edd442c3d776dd73d37e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 376471751d6980f99bbe47faad193c79a05fa69f
Original-Signed-off-by: Icarus Chau <ichau@broadcom.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199775
Original-Commit-Queue: <ichau@broadcom.com>
Original-Tested-by: <ichau@broadcom.com>
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Change-Id: I47bc5d9ec147cc8bfbd893e8c0d7e5fc5e401771
Original-Reviewed-on: https://chromium-review.googlesource.com/256416
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9853
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
cygnus' serial driver wasn't part of the tree when the
big transformation was done, so follow up.
Change-Id: Ic1a53bea9bcaf1e568b50b9c2ad7782e65e36328
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9852
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The driver uses the MSPI controller to read/write to/from SPI flash
BUG=chrome-os-partner:35811
BRANCH=boradcom-firmware
TEST=bootblock loads and executes verstage
Change-Id: I34c7882170e4f89bee1b6001563c09b16dfea8ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8c3b156019df429e9d12728224ed4eec8436f415
Original-Signed-off-by: Corneliu Doban <cdoban@broadcom.com>
Original-Reviewed-on: https://chrome-internal-review.googlesource.com/199776
Original-Reviewed-by: Scott Branden <sbranden@broadcom.com>
Original-Tested-by: Corneliu Doban <cdoban@broadcom.com>
Original-Commit-Queue: Corneliu Doban <cdoban@broadcom.com>
Original-Change-Id: Ice798ec76011ee47e13174b4c5534b0d0bc8b4ad
Original-Reviewed-on: https://chromium-review.googlesource.com/256414
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/9849
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This add hynix-2GB SDRAM(H5TC4G63AFR-PBA), whose timing is the same as
H5TC4G63CFR-PBA, to veyron boards.
BUG=None
BRANCH=veyron
TEST=build on mighty and boot on mighty board with ram-id reworked
Change-Id: I3ae5e65e60e18414cf4de6fbcc5bed736b1492de
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b22029f9b05ebb9a775266a7e3aae38b50c1883a
Original-Change-Id: If17fb002f2816990e1706833b37ac6be345e540b
Original-Signed-off-by: ZhengShunQian <zhengsq@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256307
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Lin Huang <hl@rock-chips.com>
Original-Tested-by: Lin Huang <hl@rock-chips.com>
Reviewed-on: http://review.coreboot.org/9848
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The existing DDR setup configures the burst length to be 8. However
the DDR controller can only be given sufficient data per clock to
satisfy a burst length of 4, hence the bursts are only half
populated. This results in a 50% drop of efficiency.
Fix this by configuring the burst size to 4.
BUG=chrome-os-partner:31438, chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly
BRANCH=none
Change-Id: I761ba73a04688841ca39a370b7cb99b6e0b22964
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e590ab8387dbbccef45dc84d1eeafee2abc9e2e
Original-Change-Id: I585385b65e330624ad70292349e50c6695eeeb6c
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256305
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9847
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The DDR On Die Termination was incorrectly configured at 75R,
where as the data sheet suggests for DDR2-800 it should be
set to 50R.
Correct this by adjusting the ODT setting in the EMR register.
BUG=chrome-os-partner:31438, chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly
BRANCH=none
Change-Id: I2f0242c422b1cb3d1f64ce3dd17b62fef5e7e155
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ac081ac59c0dc3d16a7b540cd379fb870b6cfe40
Original-Change-Id: If7951812033c4e88f4be3c143fb49526eddba142
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256304
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9846
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proper way to initialize DDR2 is for the PHY to
automatically establish precise timing configuration
through the training process. The alternative (used
initially for testing) is no longer needed.
This change determined the removal of some local
variables as they ended up being used in one location only.
BUG=chrome-os-partner:31438, chrome-os-partner:37087
TEST=tested on Pistachio bring up board -> DDR initialized
properly and ramstage executed correctly.
BRANCH=none
Change-Id: I31e9a8975d176a04061f9c84fe06cce850bb53b9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e28f3ef9a22436bb0fa949df6f5a5c6a67002dfd
Original-Change-Id: Ifb9c1bb6e0b71af72340381bd2349850d1b4af2d
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256303
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9845
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Process information reported by uber-sbl: print out its version and
RPM and KRAIT log contents.
BRANCH=storm
BUG=chrome-os-partner:30623
TEST=rebooted a storm device, checked out /sys/firmware/log after
booting up Chrome OS:
localhost ~ # head -29 /sys/firmware/log | tail -15
Uber-sbl version: @vbendeb-AAABANAZA
Section 0 log:
0 :00:SBL1, Start
0 :00:SBL-RO Krait
2623 :00:SBL-RO Krait
0 :00:BB
4666 :00:BB
0 :00:sbl1_hw_init, Start
6130 :00:sbl1_hw_init, Delta
0 :00:SBL1, End
15372:00:SBL1, Delta
Section 1 log:
0 :00:SBL-RO Krait, Start
0 :00:SBL-RO Krait, End
336 :00:SBL-RO Krait, Delta
localhost ~ #
Change-Id: I524dbb49f676046a43bfba26b31b2834c8d2769c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: dcabca6eb87dcead0c9c33749ed76ac939d843c1
Original-Change-Id: Ic037f936ff2d09b0346fb5239094e7928dfd7620
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/252830
Original-Reviewed-by: Varadarajan Narayanan <varada@qti.qualcomm.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com>
Reviewed-on: http://review.coreboot.org/9843
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some platforms may pass as a parameter the maskrom or vendor startup
code information when calling the bootblock.
Make sure the bootblock startup code saves this parameter for use by
coreboot. As we don't want to touch memory before caches are
initialized, save the passed in parameter in r10 for the duration of
cache initialization.
Added warning comments to help enforcing that cache initialization
code does not touch r10.
BRANCH=storm
BUG=chrome-os-partner:30623
TEST=with the rest of the patches applied see the QCA uber-sbl report
in the coreboot console output.
Change-Id: Ic6a09e8c3cf13ac4f2d12ee91c7ab41bc9aa95da
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e41584f769eb042604883275b0d0bdfbf5b0d358
Original-Change-Id: I517a79dc95040326f46f0b80ee4e74bdddde8bf4
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255144
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com>
Reviewed-on: http://review.coreboot.org/9842
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This describes the structure of the information passed through a
pointer by uber-sbl to be processed by the coreboot bootblock.
BRANCH=storm
BUG=chrome-os-partner:30623
TEST=with the rest of the patches applied observed uber-sbl
information added to the coreboot console log.
Change-Id: If04c4ee0ccfda3df45bd22eb576aaa5b51f1c4b5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ed39e2bcd793fd490416b407f627b5a9a86b8f78
Original-Change-Id: I1dffbf4559853a818e81ca5fdeff013cf008dd6a
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255143
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@gmail.com>
Reviewed-on: http://review.coreboot.org/9841
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The I2C MFIO setup function now supports all interfaces.
Also, the API for the clock setup function changed to support
all interfaces.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; all I2C interfaces
were tested with the TPM and they all work properly.
BRANCH=none
Change-Id: I6dfd1c4647335878402cabb2ae512d6e3737a433
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f8a7ffb54e3f5092c9844b9b502949d3cfc053d1
Original-Change-Id: Ibd67c07acf3d1d9c594faa8ced5ab56d9abb2e40
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256362
Original-Reviewed-by: Chris Lane <chris.lane@frontier-silicon.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9840
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; all I2C interfaces
were tested with the TPM and they all work properly.
BRANCH=none
Change-Id: I02202585140beb818212c02800f6b7e4966a922a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 33b2adecc4939ac73fffba47adf1c8306a888b8d
Original-Change-Id: Ida7eaa72d4d6e6b034319086410de5baa63788bc
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/256361
Original-Reviewed-by: Chris Lane <chris.lane@frontier-silicon.com>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes quite a bit of code duplication between cpu_to_le32()
and clrsetbits_le32() style macros on the different architectures. This
also syncs those macros back up to the new write32(a, v) style IO
accessor macros that are now used on ARM and ARM64.
CQ-DEPEND=CL:254862
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Falco, Pinky, Pit, Rambi, Ryu,
Storm and Urara. Booted on Jerry. Tried to compare binary images...
unfortunately something about the new macro notation makes the compiler
evaluate it more efficiently (not recalculating the address between the
read and the write), so this was of limited value.
Change-Id: If8ab62912c952d68a67a0f71e82b038732cd1317
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fd43bf446581bfb84bec4f2ebb56b5de95971c3b
Original-Change-Id: I7d301b5bb5ac0db7f5ff39e3adc2b28a1f402a72
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254866
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a manual cleanup of all the rubble left by coccinelle
waltzing through our code base. It's generally not very good with line
breaks and sometimes even eats comments, so this patch is my best
attempt at putting it all back together.
Also finally remove those hated writel()-style macros from the headers.
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: Id572f69c420c35577701feb154faa5aaf79cd13e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 817402a80ab77083728b55aed74b3b4202ba7f1d
Original-Change-Id: I3b0dcd6fe09fc4e3b83ee491625d6dced98e3047
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254865
Reviewed-on: http://review.coreboot.org/9837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to src/:
@@
expression A, V;
@@
- writel(V, A)
+ write32(A, V)
@@
expression A, V;
@@
- writew(V, A)
+ write16(A, V)
@@
expression A, V;
@@
- writeb(V, A)
+ write8(A, V)
@@
expression A;
@@
- readl(A)
+ read32(A)
@@
expression A;
@@
- readb(A)
+ read8(A)
BRANCH=none
BUG=chromium:444723
TEST=None (depends on next patch)
Change-Id: I5dd96490c85ee2bcbc669f08bc6fff0ecc0f9e27
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 64f643da95d85954c4d4ea91c34a5c69b9b08eb6
Original-Change-Id: I366a2eb5b3a0df2279ebcce572fe814894791c42
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254864
Reviewed-on: http://review.coreboot.org/9836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch changes the argument order for the (now temporarily unused)
write32() accessor macro (and equivalents for other lengths) from
(value, address) to (address, value) in order to conform with the
equivalent on x86. Also removes one remaining use of write32() on ARM
that slipped through since coccinelle doesn't inspect header files.
BRANCH=none
BUG=chromium:444723
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: Id5739b144f6a5cfd40958ea68510dcf0b89fbfa9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f02cae8b04f2042530bafc91346d11bb666aa42d
Original-Change-Id: Ia91c2c19d8444e853a2fc12590a52c2b6447a1b9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254863
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch is a raw application of the following spatch to the
directories src/arch/arm(64)?, src/mainboard/<arm(64)-board>,
src/soc/<arm(64)-soc> and src/drivers/gic:
@@
expression A, V;
@@
- write32(V, A)
+ writel(V, A)
@@
expression A, V;
@@
- write16(V, A)
+ writew(V, A)
@@
expression A, V;
@@
- write8(V, A)
+ writeb(V, A)
This replaces all uses of write{32,16,8}() with write{l,w,b}()
which is currently equivalent and much more common. This is a
preparatory step that will allow us to easier flip them all at once to
the new write32(a,v) model.
BRANCH=none
BUG=chromium:451388
TEST=Compiled Cosmos, Daisy, Blaze, Pit, Ryu, Storm and Pinky.
Change-Id: I16016cd77780e7cadbabe7d8aa7ab465b95b8f09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93f0ada19b429b4e30d67335b4e61d0f43597b24
Original-Change-Id: I1ac01c67efef4656607663253ed298ff4d0ef89d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254862
Reviewed-on: http://review.coreboot.org/9834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adding a new field to a CBMEM structure does not work if there are
systems with older RO that do not have this new field as it means
romstage did not prepare the field and ramstage is using it
uninitialized.
To deal with this instead of adding a new field split the existing
s3_resume variable into bytes, using the first byte for the existing
s3_resume variable (which is always just 0 or 1) and the second byte
for the new varible, which will always be 0 for the old RO and can
be set by new RO.
BUG=chrome-os-partner:37108
BRANCH=samus
TEST=manual testing on samus:
1) ensure that if vboot requests reboot after TPM setup that it still
works and the reboot happens after reference code execution.
2) ensure that if RO is older without this change that it does not
cause a continuous reboot if newer ramstage is added
3) test that suspend resume still works as expected
Reviewed-on: https://chromium-review.googlesource.com/253550
Reviewed-by: Alec Berg <alecaberg@chromium.org>
Reviewed-by: Shawn N <shawnn@chromium.org>
(cherry picked from commit 1ccb7ee5fc6980ca0f26fa52b385d2cc52f396c9)
Change-Id: I6e206b4a3b33b8a31d102d64bd37d34657cf49ac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fe85678ee788ff939bc8c084829a1b04232c4c6c
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Change-Id: If69d0ff9cc3bf596eee8c3a8d6e04951820a26fe
Original-Reviewed-on: https://chromium-review.googlesource.com/256114
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This applies the same hack to Danger and Brain as on Rialto which
allows us to remove the EC-related sections from their respective
flashmaps.
BUG=none
BRANCH=veyron
CQ-DEPEND=CL:255669
TEST=built and booted on Brain w/ depthcharge and mosys changes,
was able to read vbnv data from userspace
Change-Id: I95715d59a21cd081ac4a3a2216576ede5620f1a5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4de4273be9ac80ca77a34bc076d1f265fbb94e9f
Original-Change-Id: I6c2041e8c17ab157599255a505aaef5e2447a241
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255780
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
if DCDC_UV_ACT_REG setted, when the buck voltage drop to 85%,
rk808 will reset this buck, but now when the current consumption large,
rk808 may miscarriage of justice this status, so we must disable this function
BUG=chrome-os-partner:34834
TEST=Boot from jerry, and do RUNIN test sucess
BRANCH=None
Change-Id: I08cef73b88d6c2722b389c632c7db29605f4545d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 858c8abc11a824fc3d991a39a49710243f4b1473
Original-Change-Id: I46ebe332c576eebd3386b5042b146a8b57a5c194
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/254496
Original-Commit-Queue: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9831
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We found that we should better keep ODT off for LPDDR3 on our boards.
BRANCH=veyron
BUG=chrome-os-partner:37346
TEST=Boot veyron_speedy normal
Change-Id: Id158c88769cf7ed1a5127cd09bad679a2f5e6a01
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0d85725a6faedb5bdbe8731991c225c31f138599
Original-Change-Id: Iebb8e74706756508dd56b85ad87baad48893c619
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255381
Reviewed-on: http://review.coreboot.org/9830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds all SDRAM configurations currently in use for any Veyron
board to all boards. In the future we might decide that we want to reuse
known good memory from one board on another, and having all of these in
there already might help us avoid a firmware rev. We can still
differentiate them later if the need ever arises.
Not touching Rialto since it already decided to go its own way and
replace an existing RAM code with it's own 1GB configuration. Also
adjusting the names of the recently added DDR3 4GB configs to fit the
existing scheme.
Includes changes from "veyron: The ODT function is disabled LPDDR3".
BRANCH=veyron
BUG=None
TEST=Compiled all Veyron boards, booted on Jerry.
Change-Id: I817efd4b467a5a9587475a82df207048173e7bd5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 36d3fe138b154a16700e3c7adbb33834ff1c5284
Original-Change-Id: I4d037967dcb5cbd6b2b82f347f6b19541559b61a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255665
Reviewed-on: http://review.coreboot.org/9829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The wrong offsets were being used for the GRF_SOC_CON2 register. This also
configures odt based on the value of odt in the sdram_params for lpddr systems.
BUG=chrome-os-partner:37346
TEST=boot veyron_speedy and veyron_jerry
BRANCH=None
Change-Id: I13ec3d0df162fe73fabf8af40dd5472e15d6f6af
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 403ab13de17290dc3766bd6f1a03b6effbe58b41
Original-Change-Id: Ic0c18cc7ccf861ef8749e6c950fab9a2802e5f26
Original-Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255584
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the absolute offset value to the CBFS log, to make it easier to
understand which particular CBFS section the file is loaded from.
BRANCH=storm
BUG=none
TEST=rebooted a Whirlwind device, observed an empty line before the
ramstage section of the log and absolute offsets reported by
CBFS.
Change-Id: Ifcb79ab386629446b98625a5416dfa5850a105f6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ecc4d1df7c51a263230c45ecac5981d53bdd44b1
Original-Change-Id: I5cc727127374d6e55b8ff6f45b250ef97125a8ec
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255120
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9827
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
add the K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3 inf file,
and use ram_id 1110 correspond to K4B8G1646Q-4GB ddr3
use ram_id 1111 correspond to H5TC8G63XXX-4GB ddr3
BUG=None
TEST=Boot veyron_jerry normal
BRANCH=None
Change-Id: I3398516a9f2c2e44c9f5d08d0a3ab6e76b5c6f5f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b8dfc455bb93c2daf567e3b6e39c0a715e44311c
Original-Change-Id: I90250cb84eb140f93c4fc655fb3b90584dd515c0
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/255010
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9826
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix build bug that is referencing vboot_data from
vendorcode/google/chromeos/gnvs.c when CONFIG_HAVE_ACPI_TABLES is not
set.
BRANCH=none
BUG=None
TEST=Build and run on Glados
1. Checkout updated patches for config, skylake and glados through
FspNotify1
2. Verify that mainboard/intel/glados/Kconfig does not select
HAVE_ACPI_TABLES
3. emerge-glados coreboot
4. Test passes if build completes successfully
Change-Id: Ida5ab8b8dafe30b11dc80dab935e3223d4c760d3
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1908079360aa065a36956d487eb93142e9c012a1
Original-Change-Id: Icac3845f7e2d1ddffa5f787a640033fba286c13e
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/254360
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/9825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
I2c transfer may consist of multiple segments (for instance write
segment to set the register address and then a read segment to read
the register value). Transfer should be stopped as soon as a segment
processing error has been reported.
BRANCH=master
BUG=chrome-os-partner:35328
TEST=transfer shall not process the read segment when the write segment fails
Change-Id: I85b7b59b376ce33ba3f6d2526be86e9f6585d97b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 50cd4d40851b3cea99183c549c47b4486a3deb4a
Original-Change-Id: Id65f995d860dd670b289fbdd9eb0ca19a50d7007
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254494
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9824
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The qup_i2c_write_fifo() made to query QUP_I2C_MASTER_STATUS after QUP
transitions into PAUSE state to ensure that it captures the correct status.
Handled more error bits.
BRANCH=chromeos-2013.04
BUG=chrome-os-partner:35328
TEST=Booted up storm P0.2, verified that the TPM on GSBI1 works.
Verified that SUCCESS is not reported when the write FIFO has failed.
Change-Id: Ia91638d37b3fa8449630aa2cf932114363b2db78
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 75e0d59d2e6ba03182003f22944dbf99ce3eb412
Original-Change-Id: Ic4e8e85686499ce71ad3258b52e687ceff36a1f8
Original-Signed-off-by: Sourabh Banerjee <sbanerje@codeaurora.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/254495
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9823
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Cache operations are simplified by removing assembly
implementation and replacing it with simpler C code.
BUG=chrome-os-partner:31438
TEST=tested on Pistachio bring up board; caches are properly
invalidated;
BRANCH=none
Change-Id: I0f092660549c368e98c208ae0c991fe6f5a428d7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bf99849e75813cba865b15af9e110687816e61e4
Original-Change-Id: I965e7929718424f92f3556369d36a18ef67aa0d0
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250792
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9820
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When using single-channel ddr, DMC channel 1 need to reset dll,
otherwise it will lead to pmdomain idle request fails.
BUG=chrome-os-partner:35654
BRANCH=veyron
TEST=boot rialto
Change-Id: Id6b673187c688d238e9a391b3d98720c783e3af4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 927e8426104f8869e139c3f60a04cd49bf726e61
Original-Change-Id: I8be1567040ddb5f2a2b0d06568e517d794ead87a
Original-Signed-off-by: jinkun.hong <jinkun.hong@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/250060
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9819
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Using identity_map(), map the DRAM/SRAM regions to themselves (which
happens to be using KUSEG on urara).
The bootblock (which still runs in KSEG0) sets up the identity mapping
in bootblock_mmu_init() so that ROM/RAM stages can be loaded into the
KUSEG address range.
The stack and pre-RAM CBMEM console also remain in KSEG0 since we
don't really care about their physical addresses.
Also splitting CBFS cache to pre and post RAM, to allow for larger
rambase images.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=With the rest of coreboot and depthcharge patches applied:
- booted urara into the kernel login prompt
- from depthcharge CLI tried accessing memory below 0x100000 -
observed the exception.
Change-Id: If78f1c5c54d3587fe83e25c79698b2e9e41d3309
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9668b440b35805e8ce442be62f67053cedcb205e
Original-Change-Id: I187d02fa2ace08b9fb7a333c928e92c54465abc2
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246694
Reviewed-on: http://review.coreboot.org/9816
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Introduce identity_map() function. It takes a memory range and
identity maps it entirely in the TLB table, if possible. As a result
the virtual and physical address ranges are the same.
The function attempts to use as large of a page size as possible for
each region in order to conserve TLB entries.
BUG=chrome-os-partner:36258
BRANCH=none
TEST=Build and boot on Pistachio with the rest of the patches applied.
Change-Id: I4d781b04699e069a71c49a0c6ca15c7a6b42a468
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 234d32edfd201019b7a723316a79c932c62ce87e
Original-Change-Id: If3e2392b19555cb6dbae8b5559c1b1e53a313637
Original-Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/246693
Reviewed-on: http://review.coreboot.org/9815
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Found that any non-USB3.0 devices connected to type-C ports
(displayPort dongles) cause XHCI port to see connection which in turn
leads us to enter USB compliance mode.
That in turn causes the port to wake the system for a yet-to-be
determined reason. Clearing the PORTSC status bits (actually just
CSC) seems to remedy the wake.
Signed-off-by: Todd Broch <tbroch@chromium.org>
BRANCH=samus
BUG=chrome-os-partner:35320
TEST=manual,
1. Plug hoho into type-C port on samus and remove
2. powerd_dbus_suspend
Device stays asleep.
Change-Id: Id3a291579ffca0152a7ef32e37ecae80ca08a82b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0be5cba4916681dceb0372e76d9643e6c7175db5
Original-Change-Id: I1396b9f8013dbbb31286c1d8958af592b3da7475
Original-Reviewed-on: https://chromium-review.googlesource.com/247410
Original-Commit-Queue: Todd Broch <tbroch@chromium.org>
Original-Tested-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9814
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I97920e7eb64c05034184f9a4e1c8f2dfa44d3fdd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9813
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If the board is configured with a pre-graphics delay it should
be skipped in the resume path.
BUG=chrome-os-partner:28234
BRANCH=broadwell
TEST=measure resume time in dev mode to be same as normal mode
Change-Id: I5a4ad5bba9e5316c89f7935d8811759b041429d9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b44a7167532410fc44ca9df1c91c91aaf541ae49
Original-Change-Id: Ic9f2cda71d8a567f57e863409f0f3fb98ab68bcf
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245116
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9812
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch fixes the use of the recovery button, and the value is stored
in a SATA controller scratch register.
BUG=chrome-os-partner:35241
BRANCH=none
TEST=Use recovery button and run firmware_RecoveryButton
Change-Id: Ia06f147c7e44d6c4eea2c2e4f502c233c956ee9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34c7ee922a9602b3448a72cd669fd68feeed1bba
Original-Change-Id: I1667c7f188b0f87c4bc7caa82f9c977b2b4c0611
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/241772
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9811
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is a no-op change just sorting the CBMEM entries' definitions for
easy look up and comparison.
BRANCH=storm
BUG=none
TEST=Booted a storm device, observed the expected CBMEM entries
present in the console output.
Change-Id: I26365285f20ecb256918277b60e178cd61dc8213
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f140fd8d85ded30d1b89f5d4c64f8b9f31d6b27b
Original-Change-Id: Ibcd4f184ef1bade10ad677384f61243da7e3c713
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225259
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9810
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Urara uses SPFI interface 1 and Winbond SPI NOR flash.
BRANCH=none
BUG=chrome-os-partner:31438
TEST=with the fix of the Winbond driver (next patch) the bootblock
successfully probes the Windbond device on the FPGA board.
Console log below:
coreboot-4.0 bootblock Tue Nov 11 07:05:48 PST 2014 starting...
SF: Detected W25Q16 with page size 1000, total 200000
Change-Id: Ia848eac5b4a94bf95297c928b5447463c90d89eb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38386715c52526edbe9ad356945849e21799fd94
Original-Change-Id: Ic27b60adc26bf244e7a15b5257e94df4b9d88249
Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/229030
Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-on: http://review.coreboot.org/9809
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This was added in upstream but not in Chromium OS where
pistachio support was developed.
Change-Id: I54f883776f19aa7bd357841731166e92d03145d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9808
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Board boots to linux. VGA works with rom.
Change-Id: I96b73a90c3d88672f0d238f4b735cd2f96ef99bd
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/9803
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I3375c21d5d4aed30d5641629c44d6a5885efee11
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/9807
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Tested-by: build bot (Jenkins)
|
|
Tested on T530, T430s.
Verified with lspci dump.
Change-Id: I45acadb0c55534a67f7ad3e7bd84f4482a4344d7
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/9451
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I9a40e5a1028c7674e6dd54742e6646ba48ce7696
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/9449
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Some upstreaming patches missed that, so follow up.
Change-Id: I28665c97ac777d8b0b0f909e64b32681ed2b98f7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9771
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:35807
BRANCH=broadcom-firmware
TEST=booted b0 board. messages printed on console:
coreboot-bcf5dc0-dirty bootblock Mon Feb 9 13:33:55 PST 2015 starting...
Exception handlers installed.
Change-Id: I271ead2f4fe48b809fd311acd5a27a675dce549e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ddff8fb170e775a121150fce065410d2925ad18c
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: Ia6e82fa89547d61745c1473f723897dc3c1296ef
Original-Reviewed-on: https://chromium-review.googlesource.com/251301
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9765
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
BUG=chrome-os-partner:35807
BRANCH=broadcom-firmware
TEST=none
Change-Id: I40623e92f290e5c584a451d99071316b6fc35431
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 505720f734da7a4cdfaff8b2531385644141ba83
Original-Change-Id: I655c7065047971ab05a13e90ab911d7464a37552
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/251300
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9764
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
ChromeOS/vboot devices expect the TPM PCRs 0 and 1 to be extended with
digests that attest the chosen boot mode (developer/recovery) and the
HWID in a secure way. This patch uses the newly added vboot2 support
functions to fetch these digests and store them in the TPM.
CQ-DEPEND=CL:244542
BRANCH=veyron
BUG=chromium:451609
TEST=Booted Jerry. Confirmed that PCR0 contains the same value as on my
vboot1 Blaze and Falco (and PCR1 contains some non-zero hash).
Original-Change-Id: I7037b8198c09fccee5440c4c85f0821166784cec
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/245119
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 8b44e13098cb7493091f2ce6c4ab423f2cbf0177)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I549de8c07353683633fbf73e4ee62ba0ed72ff89
Reviewed-on: http://review.coreboot.org/9706
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chromium:452179
BRANCH=ToT
CQ-DEPEND=CL:243362
TEST=manual
emerge-veyron_pinky coreboot
Original-Change-Id: Ibcbaea2990e5e06ea7cfaaa5412ef7c1477f5fcc
Original-Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/243380
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 8e5c18eeb21944bdcb064b4491c6781d16ef5608)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I26f6fb67655cb1dfbdcdc48530ef6bfeb1aa692a
Reviewed-on: http://review.coreboot.org/9705
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The ramstage is loaded from romstage, so the LZMA scratchpad buffer used
to decompress it is part of the romstage BSS in SRAM. On RK3288, SRAM
cannot be cached which makes the decompression so slow that it's faster
to just load an uncompressed image from SPI. Disable ramstage
compression on this SoC to account for that.
[pg: implementation avoids restructuring all of Kconfig]
BRANCH=None
BUG=None
TEST=Built for Pinky and Falco, confirmed that the former didn't have
COMPRESS_RAMSTAGE in its .config and the latter still did. Measured a
speed-up of about 35ms on Pinky. (For some weird reason, the
decompression of the payload also takes way longer than on other
platforms, although not as long as the ramstage. I have no explanation
for that and can't really think of a good way to figure it out... maybe
the Cortex-A12 is just terrible at some operation that LZMA uses a lot?)
Change-Id: I9f67f7537696ec09496483b16b59a8b73f4cb11b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/234192
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9792
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I62674ccfb836fb0b02ac562f678cdfa44be98ae3
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/9779
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
We recently restructured where the CBFS header is stored
and how it is looked up, with less magic. The RISC-V port
didn't get the memo, so have it follow the pack now.
Change-Id: Ic27e3e7f9acd55027e357f2c4beddf960ea02c4d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/9795
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
When CONFIG_MULTIPLE_CBFS_INSTANCES is enabled, the image is expected
to have CBFS instances in rw-a and rw-b sections of the bootrom.
This patch adds code which makes sure that CBFS header points at the
proper bootrpom section as determined by vboot, and the RW stages load
from that section.
BRANCH=storm
BUG=chrome-os-partner:34161, chromium:445938
TEST=with the rest of the patches in, STORM boots all the way into
Linux login prompt.
Original-Change-Id: I187e3d3e65d548c672fdf3b42419544d3bd11ea1
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/237662
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 71ad0bb41b183374a84a5b9fb92c3afd813ceace)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ia05cb713981c44da8cb379b72dfbe17fe1f6c5ff
Reviewed-on: http://review.coreboot.org/9704
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns our verstage code to the new API addition in vboot2.
The hardware crypto functions are stubbed out by default and just
pretend that all algorithms are unsupported, causing vboot to fall back
to the normal software hashing code. These weak symbols can be
overridden by individual platform code to provide actual hardware
crypto engine support.
CQ-DEPEND=CL:236453
BRANCH=None
BUG=chrome-os-partner:32987
TEST=Booted Pinky, confirmed vboot falls back to software crypto.
Original-Change-Id: Idf6a38febd163aa2bff6e9a0e207213f01ca8324
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/236435
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
(cherry picked from commit 9b5ee7f575f1aa3b0eb6ef78947ca93a4818f57b)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I6f0e19255a9bc5c5cd1767db76f1e47897ef0798
Reviewed-on: http://review.coreboot.org/9703
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this allows each board to decide what to do after firmware verification is
done. some board needs to return back to the previous stage and let the
previous stage kick off the verified stage.
this also makes it more visible what is going to happen in the verstage since
stage_exit now resides in main().
BUG=none
BRANCH=tot
TEST=booted cosmos dev board. booted blaze in normal and recovery mode.
built for all current boards.
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I3cb466cedf2a9c2b0d48fc4b0f73f76d0714c0c7
Original-Reviewed-on: https://chromium-review.googlesource.com/232517
(cherry picked from commit 495704f36aa54ba12231d396376f01289d083f58)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: Ic20dfd3fa93849befc2b37012a5e0907fe83e8e2
Reviewed-on: http://review.coreboot.org/9702
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The ipq806x UART is based on the same universal serial port which can
be also configured as i2c or SPI. Configuring it is not a trivial
task, so in case the kernel wants to use earlyprintk() the port needs
to be configured by the firmware.
Invoking uart_init() when the console is not enabled causes include
file collisions, which would require changes to more than 100 files.
Leaving this to another day, rearranging the ipq806x driver to be able
to invoke UART initialization function even when serial console is not
configured.
Also add a check to avoid initialization if UART has been already
set up.
BRANCH=storm
BUG=chrome-os-partner:35364
TEST=verified that storm console is still fully operational when
enabled, and that the kernel boots fine to the serial console
login prompt even if the firmware console is disabled.
Change-Id: Ibbbab875449f2ac2f0d6c504c18faf0da8251ffa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c512d6c1d0c0868137d1213ea84cd4bca58872db
Original-Change-Id: I421acba3edf398d960b5058f15d1abb80ebc7660
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240516
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9794
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Originally ported QCA UART driver used hardware accessor macros where
both address and data were represented by 32 bit integers. Coreboot
uses macros where addresses are represented by pointers, this make the
code more robust, as accidental swap between address and data does not
go unnoticed.
This patch converts ipq806x UART driver to use coreboot accessors. It
relies on gcc void pointer arithmetic considering objects pointed at
by void pointers to be one byte in size. Also replacing spaces with
hard tabs where appropriate.
BRANCH=storm
BUG=chrome-os-partner:34790
TEST=new code still boots fine on Storm with console output present.
Change-Id: I3ded9c338ff241bb1d839994f7296756aad8772d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 10616351704ebbcfcf25793ae974b256bc5bd6b0
Original-Change-Id: Ie15e09f9f3ea10a8566b6845219c2e09fed39218
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/240514
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Reviewed-on: http://review.coreboot.org/9793
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
