Age | Commit message (Collapse) | Author |
|
Add PCIe-eMMC bridge bayhub 720 on Sarien.
BUG=b:157971972
BRANCH=sarien
TEST=local build and boot from storage successfully
Change-Id: I28f40a420d51f476487655548f386cfbdc2e5329
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42740
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
Reset the Touchscreen (TS) and disable the stop GPIO (report switch) at
the same time. Add a delay of 100 ms after disabling the stop GPIO. This
will ensure the required delay is inserted for both reset and stop
disable GPIOs simultaneously.
BUG=b:152936541
TEST=Build and boot the waddledoo mainboard. Ensure that the SiS
Touchscreen is functional.
Change-Id: Icbfb5e07a28ab72b1ff696ad1183a6c2173dcaac
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43453
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
H9HCNNNBKMMLXR-NEE
K4U6E3S4AA-MGCR
BUG=None
TEST=Build the drawcia board.
Change-Id: Id05c0b2a87b64bfedc761949cbc8ad6cf7dd73a5
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43505
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change does the following:
a. USI_REPORT_EN is no longer set to high in coreboot. Instead
GPIO_144 is exposed as stop_gpio in ACPI to allow OS to control this
pad as required.
b. Appropriate delays are added for power-down sequencing:
- Delay after REPORT_EN is disabled - 1ms
- Delay after RESET is asserted - 1ms
BUG=b:159501288
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: If4d12fa0d4f4e5123d8fdccdabda996dcafa4523
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Morphius uses Goodix touchscreen and not G2 touchscreen. This change
updates hid and desc properties in devicetree accordingly.
BUG=b:159501288
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I2527fa5409bb127ac225c6fb2a5f1bc24895f6cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
GPIO_91 is added to ACPI using the device tree entry for codec. So,
this change drops the TODO from GPIO table.
Change-Id: I9c2e91465ab554126531f8512028360ae5fb316d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures all missing pads in ramstage for dalboz
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Ia30da908d3827177a7b3594ffba38bff81018ab9
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change configures all missing pads in ramstage for trembyle
reference. This ensures that the state of all pads is set correctly
for the payload/OS. Also, all the pads for the platform are configured
in baseboard gpio table in ramstage to ensure that variants can
override any pads if required.
BUG=b:154351731
Change-Id: Idd827b6a4f995546493596f22249f8699bdf526b
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops PULL_UP configured on pads in early_gpio table since
these pads have external pulls.
BUG=b:154351731
Change-Id: Id270e7b4f83dfa942655f513776a3b1c15c9678d
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change fixes the definition of `GPIO_INT_ENABLE_STATUS_DELIVERY`
to use `GPIO_INT_ENABLE_DELIVERY` instead of
`GPIO_INT_ENABLE_STATUS_DELIVERY`.
Signed-off-by: Furquan Shaikh <furquan@google.com>
Change-Id: I64d912200779875cf121cec4476fd39de74c0223
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43695
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Most of the DXIO descriptors are used to configure PCIe engines and
lanes, but on Picasso system some of the DXIO lanes can also be
configured as SATA or XGBE ports.
Change-Id: I28da1b21cf0de1813d87a6873b8d4ef3c1e0e9dd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43675
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The lane numbers in the PCIe/DXIO descriptor are the logical and not the
physical ones, so add logical to the corresponding field names of the
fsp_pcie_descriptor struct.
Change-Id: I7037fed225119218e87593932815aff815e83ff8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43660
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
new boards introduced to Kukui family.
esche: clamshell
burnet: 360 convertible
BUG=b:161768221
BRANCH=master
TEST=emerge-jacuzzi coreboot
Change-Id: I2245c34533549bb94c58938fee5778b8a03e2767
Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Update .vbt file to support two DP outputs.
Change-Id: Ifd4163aafe4ef3070d04a72a4699303af72c5102
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds ACPI code for System76 EC and converts system76/lemp9
to use EC_SYSTEM76_EC.
Tested on system76/lemp9.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Change-Id: I1f693268d94b693b6764e4a3baf4c3180689f3be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Michael Niewöhner
|
|
Add function to send POST start command to BMC. This function is
used in romstage and the POST end command will be sent in u-root.
TEST=Read POST command log in OpenBMC,
if command received successfully, message may show as below,
root@bmc-oob:~# cat /var/log/messages |grep -i "POST"
2020 Jul 15 16:36:11 bmc-oob. user.info fby3-v2020.23.1:
ipmid: POST Start Event for Payload#2
root@bmc-oob:~#
Signed-off-by: TimChu <Tim.Chu@quantatw.com>
Change-Id: Ide0e2a52876db555ed8b5e919215e85731fd80ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Create SMBIOS type 9 by getting PCIe config from BMC.
TEST=Check SMBIOS type 9 is created correctly on different SKUs
Change-Id: Ifd2031b91c960ff2add8807247271eb7c38a0bf2
Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
SystemMemoryMapHob is necessary for SMBIOS type 17 among other things.
It is a fairly large structure, so the pointer to the data instead of
the structure itself, is included in the HOB. Use pointer to
SystemMemoryMapHob structure to interpret SystemMemoryHob HOB body.
Adjust the structure definition to match with CPX-SP ww28 release.
Display more fields to ensure the structure definition is correct.
TEST=Boot DeltaLake server, and check field values of SystemMemoryMapHob
to make sure they are correct:
0x7590a090, 0x00000020 bytes: HOB_TYPE_GUID_EXTENSION
f8870015-6994-4b98-95a2bd56da91c07f: FSP_SYSTEM_MEMORYMAP_HOB_GUID
================== MEMORY MAP HOB DATA ==================
hob: 0x777f7000, structure size: 0x6c88
lowMemBase: 0x0, lowMemSize: 0x20, highMemBase: 0x40, highMemSize: 0x5d0
memSize: 0x600, memFreq: 0xb76
NumChPerMC: 3
SystemMemoryMapElement Entries: 2, entry size: 16
memory_map 0 BaseAddress: 0x0, ElementSize: 0x20, Type: 0x1
memory_map 1 BaseAddress: 0x40, ElementSize: 0x5d0, Type: 0x1
BiosFisVersion: 0x0
MmiohBase: 0x80000
0x777f7000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
...
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I271bcbd6030276b8fcd99d5b4f2c93f034dd9b52
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43336
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables CSE Lite SKU for jasperlake rvp.
BUG=b:160201335
BRANCH=None
TEST=Build and boot jasperlake rvp with CSE Lite SKU.
Cq-Depend: chrome-internal:3142530
Change-Id: I60039ffb1f24cf98f55e83d8c8649745598aa43a
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40571
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables the SkipCpuReplacementCheck config for jasperlake rvp
to avoid the forced MRC training with the soldered down SOC.
BUG=b:160201335
BRANCH=None
TEST=Build and verify on jasperlake rvp with CSE Lite SKU.
Cq-Depend: chrome-internal:3142530
Change-Id: I40fb9a25170e8db3c63a71428ba459160a918961
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43146
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables the CSE Lite SKU for the dedede baseboard.
BUG=b:160201335
TEST=Build and boot waddledoo with CSE Lite SKU.
Cq-Depend: chrome-internal:3142530
Change-Id: I24d7d715d55524807af0127aa4a346a008164b8c
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
This patches enables the SkipCpuReplacementCheck config for
the dedede baseboard to avoid the forced MRC training for all
its variants with the soldered down SOC.
BUG=b:160201335
TEST=Build and verify CSE Lite SKU on Waddledoo.
Cq-Depend: chrome-internal:3142530
Change-Id: I611e66f74a3b9b090ab5e0d836231643d3f919dc
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42930
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Add SkipCpuReplacementCheck config to control the FSPM UPD used
for skipping the CPU replacementment check to avoid the forced
MRC training for the platforms with soldered down SOC.
BUG=b:160201335
TEST=Build and verify CSE Lite SKU on Waddleddo.
Cq-Depend: chrome-internal:3142530
Change-Id: I63fcdab3686322406cf7c24fc26cbb535cc58c8d
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
|
|
Other Intel southbridges use this name for the HD audio codec.
Change-Id: Ic96797e6c2028f082130211bb5f4270391f866c5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Other Intel southbridges use this name for the HD audio codec.
Change-Id: I50dbf0a079944b7fa6cfd6622c0626bc9139af85
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
It is impossible for `find_resource` to return NULL, it dies instead.
Change-Id: If8e26f768383e741100e3690322db3dabeec1922
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A recent Coverity scan found an issue with the way the
EC_HOST_EVENT_MASK macro was being used. It was being passed values
between 0 and 63, but since it is doing basically (1ULL << (value - 1)),
this caused a shift of -1 when `i` is 0 and also doesn't reach the 63rd
bit of the mask. This is fixed by incrementing the start and end
conditions of the loop by 1, so the event mask ranges from bits 0 to 63,
instead of -1 to 62.
Found-by: Coverity CID 1430218
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6a7cfa64545f3d313de24407f0a91b48368f2a8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43460
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same
problem to come up on jasperlake. Again, it should be harmless to
configure the TCO device earlier in the boot flow.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: If95e46124660b4ed457434f727c9f9f7b02b0327
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43539
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Similar to CB:43313 (SHA bb50c672278), it seems possible for the same
problem to come up on cannonlake. Again, it should be harmless to
configure the TCO device earlier in the boot flow.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ib8883d27b2a0994a67ec5e044a692a2e853fd680
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43538
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Woomax configuration including GPIO, memory SPD table, I2C devices
and USB type C.
BUG=b:158343602
BRANCH=None
TEST=emerge-zork coreboot
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I55ba995d9438551d45cb9e17f92b5089ccf4a5fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Tested with BUILD_TIMELESS=1, Getac P470 does not change.
Change-Id: I0d51f48f0c1e37c41322a0eda49806925d9d194d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42285
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I99b062e4ce1cf862ea03b0edb6ea843df5f8f2b2
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change PCH power policy. Set default of
POWER_STATE_DEFAULT_ON_AFTER_FAILURE to n in order to change power
state to S5 when power is reapplied after power failure.
TEST=Base on CB:42289, CB:43338 and build for Deltalake.
The following Kconfig options must be selected:
select SOC_INTEL_COMMON_BLOCK_PMC
select ACPI_INTEL_HARDWARE_SLEEP_VALUES
select CPU_INTEL_COMMON_SMM
Boot the system and check the last bit of GEN_PMCON_B is set to 1
through ITP with command: pch.pm_dump
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I4d4f14bdfc18740976171fd5d369b2d79a916dc4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42976
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
are not found
1. Read VPD variable 'fsp_log_level' to decide FSP log level.
2. Define the default values when the VPD variables cannot be found,
put all the values to vpd.h for better documentation and maintenance.
Tested=On OCP DeltaLake, the fsp_log_level can be changed from the VPD variable.
Change-Id: I44cd59ed0c942c31aaf95ed0c8ac78eb7d661123
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43606
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I5a97de69bfda201e039587c67037bfb93ca16c15
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43658
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The three mainboards using this southbridge are desktop boards, which
are not dockable. The Dell Precision M6400 laptop is dockable, but even
though it has an Eaglelake MCH, it uses an i82801ix southbridge instead.
So, one could still port that laptop to coreboot after this change! :P
Also, drop the now-unnecessary `chip` and `dev` variables.
Change-Id: Ic9ab497c91d66032929190cde22d59a208887f50
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The three mainboards using this southbridge do not define it. Note that
the default value of zero might be wrong, so add a FIXME comment.
Change-Id: Id16bb12a4628daf311bddf7e4701fc480d6b18e5
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
There are more Jacuzzi followers coming and we want to have a simplified
way of adding new boards. Now, detachable and tablets should select
BOARD_GOOGLE_KUKUI_COMMON and clamshells should select
BOARD_GOOGLE_JACUZZI_COMMON.
BUG=None
TEST=make menuconfig; make -j # for kukui, krane, jacuzzi, juniper
BRANCH=kukui
Change-Id: Ifc1eb6a3792f46c5db6b5346902f1114955b28ae
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43436
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Create the madoo variant of the waddledoo reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.1.1).
BUG=b:161191394
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_MADOO
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I6d3f611606f86036d67be9c8b0fda833ab61ecc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This patch performs below operations
1. Add support for FSP 2.2
2. Set EnableMultiPhaseSiliconInit to ensure bootloader can call
FspMultiPhaseSiInit() API.
3. Provide placeholder to perform require chipset programming (example TCSS)
before calling FspMultiPhaseSiInit() API.
Change-Id: I15252d2db3f8e75d430b84e86cc5141225a3f981
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
This change drops the pulls configured on override GPIOs as they
already have external pull-ups. Also, pads which are unused are
configured as PAD_NC.
BUG=b:154351731
Change-Id: I8da5d51af25bbe2694c21ecb0868c9cc387243cb
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43562
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Tested with BUILD_TIMELESS=1, Asrock B85M Pro4 remains identical.
Change-Id: I1baa731335a9c543c7d31b9aadc8758806750c64
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42629
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop FSP_M_XIP since it's selected by the soc already.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I999d369be395de08d4ab7f115fedf4b7fa10eb34
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Drop config ONBOARD_VGA_IS_PRIMARY as it's only needed for mainboards
with multiple graphics devices.
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I6525c65af3dcfc96ea3d68a1388432179e9ac43d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43636
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace it with t430s/gma-mainboard.ads which is licensed under more
flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing
terms these files are identical.
This makes diff between boards smaller.
Change-Id: I633702d363134654e71e35404237d75b499f089a
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Replace it with t420s/gma-mainboard.ads which is licensed under more
flexible terms (GPL-2.0-only vs. GPL-2.0-or-later). Apart from licensing
terms these files are identical.
This makes diff between boards smaller.
Change-Id: I5393a603b5a4cd353149c1fa9e3e29020946b962
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41498
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Jenkins does not build `config.stm` because the file name lacks the
mainboard name. So, the code was not being build-tested, and it does not
build because several files lacked the definition for `bool`.
Add the missing #include directives. Renaming the config file so that
Jenkins build-tests it is done in a follow-up.
Change-Id: Idf012b7ace0648027ef6e901d821ca6682cee198
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43622
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Eugene Myers <cedarhouse1@comcast.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I2cf11b784299708f02fd749dcb887b6d25f86f5b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This ID is reported by newer mfg date SOCs. Needed for newer GBYT4 boards.
Change-Id: I6af746d66a15f67553de1dc1c925e5cb0b181898
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- CPU: only tested with a Xeon E3-1220 (Sandy Bridge)
- RAM: native raminit tested (4G+4G, 8G+8G)
- USB: both chipset and ASMedia USB3 work, tested in SeaBIOS and Linux (5.4)
- LAN: tested in Linux
- SATA: all 4 ports work, tested in SeaBIOS and Linux
- iGPU: I can't test it as I only have a Xeon for this socket
- PEG: tested with an nVidia GT210, initialized by SeaBIOS
- PS2 keyboard and mouse combo port: no devices to test with
- Front panel header: tested, works
- Audio: tested, works
- Diagnostic LEDs: TBD
Change-Id: I9fd3c0b148b694fcb8e728cc17f0bd45eb5af9f2
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43165
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While it looks different, the early SMBus code for this southbridge is
still the same. In addition, this code was not checking the vendor ID
before. It is assumed that adding this check does not pose a problem.
Change-Id: I95ae4db399ce5592cefca82fa75f349220023b8c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42006
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Since this southbridge is used with two different northbridges, we need
to update both of them. Plus, x4x raminit no longer needs to know which
southbridge it is paired with, since both i82801gx and i82801jx use the
common early SMBus code, so we drop some preprocessor around includes.
Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.
Change-Id: I5c21e091e437d23a173ddcf35d4f1efada6194cb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42004
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The early SMBus code for this chipset was not checking the vendor ID
before. It is assumed that adding this check does not pose a problem.
Change-Id: I0c36c8cd8aca8db860b1edafd29d4f2dbaa2c822
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42003
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Looks like no one uses early SMBus for now, but that may change someday.
Change-Id: I42971662a279860a8c2e058fcb194fe5eba7c740
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42001
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I95b82f3d733db2a46096205f23ed85aaff021e28
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42000
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
We will update the other platforms to use this common code in
susbsequent commits. While we are at it, reflow a broken line,
define the SMBus PCI device in the header and fix whitespace.
Change-Id: I1fdff2feead4165f02b24cb948d8c03318969014
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41999
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It does nothing useful anymore. Drop it before it grows moss.
Change-Id: I5f95376fe2a38eda5d819c53edb85ef11ab7a0f1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43591
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file does not contain useful information and is not used to build
the image. The common GPIO driver from soc/intel/common uses layout in
lewisburg_pch_gpio_defs.h [1,2] file, which is correct for all chipsets
from the Lewisburg family: C621, C621A, C622, C624, C625, C626, C627,
C627A, C628, C629, C629A [3]
[1] src/soc/intel/xeon_sp/include/soc/lewisburg_pch_gpio_defs.h
[2] https://review.coreboot.org/c/coreboot/+/39425
[3] Intel document #547817
Change-Id: I1f3ac4afff9e628890df8cec075fd3e42a590172
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43535
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Bryant Ou <bryant.ou.q@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is no longer used for chromeos.c.
BUG=b:160752610
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I9a716a88ff9811fff46abca229be15522733bfef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43472
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Unconditionally selecting `GFX_GMA_IGNORE_PRESENCE_STRAPS` creates a
hard dependency on `MAINBOARD_USE_LIBGFXINIT`, which is undesired. Move
it out of the `if GFX_GMA` block to break this unwanted dependency.
TEST=Build for Librem 13v4 with no graphics init successfully.
Change-Id: I53e132c209c065068f20959fa1a6f5195f5fe766
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Make it default to 0x400, which is what the touched southbridges use.
Change-Id: I95cb1730d5bf6f596ed1ca8e7dba40b6a9e882fe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
1. Update Link frequency to 180 Mhz
2. Set data-lanes to 1 and
3. Update the clock-lane used by sensor
BUG=b:155285666
BRANCH=None
TEST=Build and able to capture image using user facing camera.
Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com>
Change-Id: I164cb6af1003de561be8ce640e7653b7bcb3a22f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
|
|
These methods are empty and the kernel treats these as optional.
BUG=b:153001807, b:154756391
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ic8ee8fb6b6bcd04c653ab77cdc5e746a8cbd0c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43466
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These methods are empty and the kernel treats these as optional.
BUG=b:153001807, b:154756391
TEST=Suspend and resume trembyle
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5f2b375c1186951f95b7ac44dc7158a0299013a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43465
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change drops internal pulls for dalboz reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_11(EC_IN_RW_OD): Pulled up to PP3300_A
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP1800_S0
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_32: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_116(CLK_REQ2_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: I62e9dbac7a55efa1e055983a7c126168ee516151
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This change drops internal pulls for trembyle reference configured on pads
which already have external pull-ups in hardware.
GPIO_0(PWR_BTN_L): Pulled up to PP3300_A
GPIO_2(WAKE_L): Pulled up to PP3300_A
GPIO_10: Unused. Changed to PAD_NC.
GPIO_12(USI_INT_ODL): Pulled up to PP3300_A
GPIO_16(USB_OC0_L): Pulled up to PP3300_A
GPIO_17(USB_OC1_L): Pulled up to PP3300_A
GPIO_21(EMMC_CMD): Pulled up to PP3300_A
GPIO_22(EC_FCH_SCI_ODL): Pulled up to PP3300_A
GPIO_31(EC_AP_INT_ODL): Pulled up to PP1800_A
GPIO_90: Unused. Changed to PAD_NC.
GPIO_113(I2C2_SCL): Pulled up to PP3300_S0
GPIO_114(I2C2_SDA): Pulled up to PP3300_S0
GPIO_129(KBRST_L): Pulled up to PP1800_S0
GPIO_130(EC_IN_RW_OD): Pulled up to PP3300_S0
GPIO_92(CLK_REQ0_L): Pulled up to PP3300_S0
GPIO_115(CLK_REQ1_L): Pulled up to PP3300_S0
GPIO_132(CLK_REQ4_L): Pulled up to PP3300_S0
BUG=b:154351731
Change-Id: Id84b801e019eede7ef543c24aac968f3ef99b3fd
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43526
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to the ACPI specification, version 6.3:
Accesses to the PM1 status registers are done through byte or word
accesses.
The same is said about the PM1 Enable registers. Therefore, reporting
dword-sized access is wrong and means nothing anyway. Since some other
platforms use word-sized access, use word everywhere for consistency.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: I6f85c9a4126f37ab2a193c3ab50a6c8e62cf6515
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested with BUILD_TIMELESS=1, AOpen DXPL Plus-U remains identical.
Change-Id: I80ec4d0d6a8ec0dc02b377cfa3f3b5f0362dbb6c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
|
|
Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change.
Change-Id: I2212a6dd4b02ac8fdcf1eafbab0226ad9faa825e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Tested with BUILD_TIMELESS=1, Packard Bell MS2290 does not change.
Change-Id: If0ee1b65a1be67ee9f5f832f076c365017a14e6a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
All supported x86 chips select HAVE_CF9_RESET, and also use 0xcf9 as
reset register in FADT. How unsurprising. We might as well use that
information to automatically fill in the FADT accordingly. So, do it.
To avoid having x86-specific code under arch-agnostic `acpi/`, create a
new optional `arch_fill_fadt` function, and override it for x86 systems.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ib436b04aafd66c3ddfa205b870c1e95afb3e846d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
They are ignored if the ACPI_FADT_WBINVD flag is set, which is required
on current ACPI versions and only maintained for ACPI 1.0 compatibility.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Ief1219542ba71d18153b64180e0ff60bd1e7687b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Looks like some preparation is needed before reset. However, Picasso
also needs some special handling and still selects this option without
selecting HAVE_CF9_RESET_PREPARE. So, just add HAVE_CF9_RESET for now.
Change-Id: I0c6da9a43a28dbee916fd6bda9ae380ebd619edf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43388
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead, just flip the desired bits using bitwise operations. As this is
initially zero, the resulting value is the same. This allows flags to be
set from anywhere regardless of execution order.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Icfd580a20524936cd0adac574331b09fb2aea925
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43387
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both `acpi_fill_fadt` and `soc_fill_fadt` set many FADT fields. Since
the latter runs later, the values programmed in it overwrite any other
values. Drop unused assignments and consolidate everything in a single
function. Use `acpi_fill_fadt` as it is mandatory (no weak definition).
Change-Id: Ia8248f20dae2b93426f309605bb2076592b08df4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43386
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to Intel Order Number 290562 (PIIX4 datasheet), 0xcf9 is the
reset register, and setting bits 1 and 2 will result in a hard reset.
Change-Id: Id5ada6a10b2269d51908c6a5fd7745ef6c33a29a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
According to Intel Document 290744 (ICH4 datasheet), 0xcf9 is the reset
register, and setting bits 1 and 2 will result in a hard reset.
Change-Id: Id1a532857d9643d222d61c3902faadd471ae2a9a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PM2_CNT register block is not present on this southbridge, as per
Intel Document 290744 (ICH4 datasheet). Also, the ACPI specification,
version 6.3, section 4.8.1.3 (PM2 Control Register), says:
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Also delete a comment about `pm2_cnt_len`, which said that the right
value differs from zero. Looks like that comment was wrong instead.
Change-Id: Icbb32f5db7b368c764b3477c40f8ae9c788df5ee
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PM2_CNT register block is not present on this southbridge, according
to comments on the code. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Ib3ff0fd9e0725f61c38e60ba56b95e6e77b0b1ed
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43382
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PM2_CNT register block is no longer needed, as explained in some
comments. While they may have been copy-pasted around a lot, they are at
least true for Hudson, and it makes sense to assume that they are true
for newer chipsets as well. As per the ACPI specification, version 6.3,
section 4.8.1.3 (PM2 Control Register):
This register block is optional, if not supported its block pointer and
length contain a value of zero.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything to indicate PM2_CNT is not supported. So, drop unneeded values.
Change-Id: Iabc7985c84aabe40ad98fdc9fc6ccbbab0a516c1
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43381
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of the currently-supported chips has PM1b_EVT nor PM1b_CNT event
register blocks. According to the ACPI specification, version 6.3,
sections 4.8.1.1 and 4.8.1.2 (PM1 Event/Control Registers):
If the PM1b_EVT_BLK is not supported, its pointer contains a value of
zero in the FADT.
If the PM1b_CNT_BLK is not supported, its pointer contains a value of
zero in the FADT.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with PM1b for now. So, drop unneeded writes to PM1b fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iff788b2ff17ba190a8dd9b0b540f1ef059a1a0ea
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43380
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
None of the currently-supported chips has a GPE1 block. The ACPI spec,
version 6.3, section 4.8.1.6 (General-Purpose Event Registers) says:
If a generic register block is not supported then its respective
block pointer and block length values in the FADT table contain zeros.
Since the FADT struct defaults to zero in coreboot, we don't need to do
anything with GPE1 for now. So, drop the unneeded writes to GPE1 fields.
Tested on Asus P8Z77-V LX2 with Linux 5.7.6 and Windows 10 at the end of
the patch train, both operating systems are able to boot successfully.
Change-Id: Iefc4bbc6e16fac12e0a9324d5a50b20aad59a6cd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43379
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on USB3 gen2 SI report to fine tune the parameters for USB3 gen2.
BRANCH=none
BUG=b:150515720
TEST=build and check the USB3 gen2 register on DUT is correct.
Change-Id: I6ec109871d682a1ae2fa4c22fdd6b87ad8a39e9e
Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.com>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
|
|
Add configs for USB 3.1 Gen2 EV settings so that people can set the
EV settings per board in device tree.
BUG=b:150515720
BRANCH=none
TEST=build coreboot and fsp with enabled fw_debug.
Flashed to puff and checked the log.
All usb configs were set correctly.
Signed-off-by: Jamie Chen <jamie.chen@intel.com>
Change-Id: Id4860665619095139c329565d433d9eb495cac02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39448
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that libgfxinit has been fixed, trying to enable the Analog port no
longer hangs the system, nor fills the monitor with unreadable garbage.
Tested with linear framebuffer, displays correctly on a 1920x1080 VGA
monitor. Scaling also works when a smaller HDMI monitor is connected as
well. Legacy VGA text mode is also functional on either monitor, too.
Change-Id: Ie2f88edcb7ed1984adebf2af23195767af13654c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43560
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FSP headers for Tiger Lake platform generated based FSP
version 3274.
Compared to the current version 3197, v3274 adds most of the legacy UPDs
in both FSPM and FSPS.
BUG=b:159151231
BRANCH=none
TEST=build and boot volteer proto2
Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
Change-Id: Id3f957aa9d9ad9710a3c930717c22f485699315e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43473
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If CONSOLE_SERIAL is not set, do not reconfigure the UART LDN.
Otherwise, SerialICE stops working when the UART LDN is disabled.
Change-Id: Ie3113e6b7b830dfdddc4d7709f00719f29e094bf
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43582
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested with BUILD_TIMELESS=1, Kontron COMe-mAL10 on T10-TNI carrierboard
does not change.
Change-Id: Ib4b4c28153398b6275728b28bda90e527d97e823
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41035
Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com>
Reviewed-by: Michael Niewöhner
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iefac6fd45791cf6a051450b41046f7e7ebc1dc41
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I22b9eb6ead37dbba6807d145468843bd01c94c84
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43445
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Print some more information at BIOS_INFO, like our CBFS code does.
Change-Id: I1431d569c57634277ea5cf7feb352419db432b44
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43444
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GTSH was 2 instead of 20 (so it's 2 degrees K hysteresis), and TSRD was
accidentally defined to take 0 arguments, instead of 1.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I14d28bacf44ac65043060b8579b3fbcec758c56c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The DPTF._OSC method incorrectly assumed that all available UUIDs would
be present in the IDSP package, but this is not always the case. Instead
of matching an incoming UUID against an index into IDSP, search the IDSP
package for the matching UUID.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I718b6abe09152647b14f7c1405b2d0d20035726b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Since there is now a mechanism to generate DPTF ACPI tables and methods
at runtime, dedede should switch to using that instead of raw ASL files.
This patch converts the existing .asl files into devicetree entries.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I6bb6e6e15f50a1e510080e16bbca09dfc5f16b1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43422
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The previous DPTF patch train missed the proper scope operator around
all of the TSR options. Without this, the optional GTSH and/or _STR
Methods end up in the wrong scope.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9298c442c047c5f7f606574d900057a7c004b47f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43458
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the initial DPTF refactor, the scope of the TCPU device was
incorrectly set as \_SB, instead of \_SB.PCI0. However, because of the
way that the acpi_inject_dsdt() callback currently works (it injects
contents before the dsdt.aml file), the Scope where the TCPU
device lives (\_SB.PCI0) doesn't exist yet. Therefore, to avoid playing
games with *when* things are defined in the DSDT, switch to defining all
of the DPTF devices in the SSDT.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ia4922b4dc6544d79d44d39e6ad18c6ab9fee0fd7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43529
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
While the DPTF refactor was in progress, TSR3 was added to volteer's
dptf.asl file, and I forgot to update the devicetree with TSR3 as well.
Also missed a swap in the passive policies of TSR0 and TSR1. This patch
fixes those.
BUG=b:149722146
TEST=boot volteer, dump SSDT & DSDT, verify TSR3._STA returns 0xF
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I71bc798492ec45bb1e2f8d779e6829db52ef4499
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Deepika Punyamurtula <deepika.punyamurtula@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Vilboz requires a different HID than rest of the zork variants. Hence,
this change sets the HID to AMDI1015 for I2S machine device in vilboz
overridetree.cb.
BUG=b:157708581
Change-Id: Ibae343f21cf8f0c782dc8a461f69172bf0da7eba
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43545
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
I2S machine device has its own driver now. So, this change drops the
support for adding I2S machine device ACPI node from ACP driver.
BUG=b:157708581
Change-Id: I9069d92ae991e05fddcc7d45a2fd21e98c3b0de8
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|