summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-04-11Snow: Set up the ChromeOS GPIOs as inputs during the ROM stage.Gabe Black
We need these to be inputs so they can be read when populating the coreboot tables. It seems like a good idea to do this early to ensure that the input gate capacitance has had a chance to charge, and if we decide to use actually use that information during the ROM stage to do earlier RW firmware selection. It is not guarded by a ChromeOS config variable because those lines are always intended to be input GPIOs, regardless of whether we're running ChromeOS or not. Change-Id: Id76008931b5081253737c6676980a1bdb476ac09 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3067 Tested-by: build bot (Jenkins)
2013-04-11Snow: Fix the recovery GPIO polarity, and lid GPIO polarity and number.Gabe Black
Change-Id: I34097f878291367b28962048190e11ccaacfc514 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3066 Tested-by: build bot (Jenkins)
2013-04-11ARM: Unmask aborts very early in the bootblock.Gabe Black
It's better to recognize aborts when they occur than to mask them to discover them later without knowing where they actually came from. Change-Id: Ic8f5321415f411afac94b5ef9dd440790df6d82c Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3065 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-11ASRock DSDT: Split the ASRock DSDTMike Loptien
This is the same split as was done on the Persimmon. Change-Id: I25bd63f23417b7926232f07eaaa7917170af9d60 Signed-off-by: Mike Loptien <mike.loptien@se-eng.com> Reviewed-on: http://review.coreboot.org/3050 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-11Exynos5250: Use new chip settings for the cpuRonald G. Minnich
Properly use the chip settings when configuring the CPU, at this point being purely graphics. Change-Id: I9bc2d32c1037653837937b314e4041abc0024835 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3054 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-04-10siemens/sitemp_g1p1: Make ACPI report the right mmconf regionPatrick Georgi
ACPI reported the entire space between top-of-memory and some (relatively) arbitrary limit as useful for MMIO. Unfortunately the HyperTransport configuration disagreed. Make them match up. Other boards are not affected since they don't report any region for that purpose at all (it seems). Change-Id: I432a679481fd1c271f14ecd6fe74f0b7a15a698e Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3047 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10GOOGLE/SNOW: add edp support to ramstageRonald G. Minnich
Add basic edp support to the ramstage. Not working. Change-Id: I15086e03417edca7426c214e67b51719d8ed9341 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3055 Tested-by: build bot (Jenkins)
2013-04-10[2/2] tps65090: re-factor for corebootDavid Hendricks
This does basic re-factoring to fit the driver into coreboot. Change-Id: Id5f8c12a73ec37ddd545d50b3e8e9b3012657db1 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3061 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10[1/2] initial import of TI TPS65090David Hendricks
This imports TPS65090 PMIC from u-boot and adds/updates Makefiles and Kconfig files. The follow-up patch will re-factor the code. Change-Id: Ic9e43b9665ddf7f55feae8fa17fbf3d2d5f4756d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3060 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10GOOGLE/SNOW: clean up the device treeRonald G. Minnich
This is a simpler device tree that is also more correct, and has graphics settings as well. Change-Id: I342d8be7dddb76e6992876c73f5c625c926977d3 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3053 Tested-by: build bot (Jenkins)
2013-04-10exynos5-common: Enable fimd_bypass and minor cleanupRonald G. Minnich
Basic cleanup, this code still does not work. Change-Id: I84ed9f08fd04cd8eb74cd860e0775d8c602f42d6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3049 Tested-by: build bot (Jenkins)
2013-04-10armv7: replace read/write macros with inlinesDavid Hendricks
This enables type checking for safety as to help prevent errors like http://review.coreboot.org/#/c/3038/ . Now compilation fails if the wrong type is passed into readb/readw/readl/writeb/writew/writel or other macros in io.h. This also deprecates readw/writew. The previous definition was 16-bits which is incorrect since wordsize on ARMv7 is 32-bits and there was only 1 instance of writew (#if 0'd anyway). Going forward we should always use read{8,16,32} and write{8,16,32} where N specifies the exact length rather than relying on ambiguous definition of wordsize. Since many macros relied on __raw_*, which were basically the same (minus data memory barrier instructions), this patch also gets rid of __raw_*. There were parts of the code which ended up using these macros consecutively, for example: setbits_le32(&regs->ch_cfg, SPI_CH_RST); clrbits_le32(&regs->ch_cfg, SPI_CH_RST); In such cases the safe versions of readl() and writel() should be used anyway. Note: This also fixes two dubious casts as to avoid breaking compilation. Change-Id: I8850933f68ea3a9b615d00ebd422f7c242268f1c Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3045 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-10exynos5: Re-factor I2C codeDavid Hendricks
This re-factors the Exynos5 I2C code to be simpler and use the new API, and updates users accordingly. - i2c_read() and i2c_write() functions updated to take bus number as an argument. - Get rid of the EEPROM_ADDR_OVERFLOW stuff in i2c_read() and i2c_write(). If a chip needs special handling we should take care of it elsewhere, not in every low-level i2c driver. - All the confusing bus config functions eliminated. No more i2c_set_early_config() or i2c_set_bus() or i2c_get_bus(). All this is handled automatically when the caller does a transaction and specifies the desired bus number. - i2c_probe() eliminated. We're not a command-line utility. - Let the compiler place static variables automatically. We don't need any of this fancy manual data placement. - Remove dead code while we're at it. This stuff was ported early on and much of it was left commented out in case we needed it. Some also includes nested macros which caused gcc to complain. - Clean up #includes (no more common.h, woohoo!), replace debug() with printk(). Change-Id: I8e1f974ea4c6c7db9f33b77bbc4fb16008ed0d2a Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3044 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09replace device/i2c.h with simpler versionDavid Hendricks
The existing header was imported along with the Exynos code and left mostly unchanged. This is the first patch in a series intended to replace the imported u-boot I2C API with a much simpler and cleaner interface: - We only need to expose i2c_read() and i2c_write() in our public API. Everything else is board/chip-dependent and should remain hidden away. - i2c_read and i2c_write functions will take bus number as an arg and we'll eliminate i2c_get_bus and i2c_set_bus. Those are prone to error and end up cluttering the code since the user needs to save the old bus number, set the new one, do the read/write, and restore the old value (3 added steps to do a simple transaction). - Stop setting default values for board-specific things like SPD and RTC bus numbers (as if we always have an SPD or RTC on I2C). - Death to all the trivial inline wrappers. And in case there was any doubt, we really don't care about the MPC8xx. Though if we did then we would not pollute the public API with its idiosyncrasies. Change-Id: I4410a3c82ed5a6b2e80e3d8c0163464a9ca7c3b0 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3043 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-09FrontRunner/Toucan-AF: boards will be renamed to fit ADLINK schemeJens Rottmann
Originally developed by LiPPERT and after the acquisition marketed as 'LiPPERT by ADLINK', the plan is now to streamline both boards into the ADLINK naming scheme. But AFAIK a few have already been sold and as of this writing the website still advertises the old names. And in any case the veteran LX products will continue to be sold by ADLINK under their original names. So create CONFIG_VENDOR_ADLINK, currently only telling users to look under LiPPERT (however any future boards will be added here). Further add an explanation to CONFIG_VENDOR_LIPPERT, and in the Mainboard model selection show both names. Change-Id: Iaafa88533ef4cce33243293c3d55754e7e93d003 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/3046 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08Fix read_option invocation in uart8250mem.cStefan Reinauer
read_option was unified between ramstage and romstage a while ago. However, it seems some invocations were not fixed accordingly. This patch switches uart8250mem.c to use the new scheme. Change-Id: I03cef4f6ee9188a6412c61d7ed34fbaff808a32b Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3033 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08Fix compilation when coverage debugging is enabledStefan Reinauer
With CONFIG_DEBUG_COVERAGE enabled, the build currently fails with src/lib/gcov-glue.c: In function 'fseek': src/lib/gcov-glue.c:87:2: error: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Werror=format] src/lib/gcov-glue.c:87:2: error: format '%d' expects argument of type 'int', but argument 4 has type 'long int' [-Werror=format] Change-Id: Iddaa601748c210d9dad06ae9dab2a3deaa635b2c Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3032 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08armv7: specify condition code for msr instructionDavid Hendricks
This adds condition codes when using the msr instruction. Although described as "optional" in the Cortex-A series programmer's guide, our experience with using the msr instruction in the payload suggests that the condition code is not optional and that this only worked in coreboot (and u-boot) because the processor comes up in SVC32 mode. (credit to Gabe Black for finding this, I'm only uploading the patch) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I0aa4715ae415e1ccc5719b7b55adcd527cc1597b Reviewed-on: http://review.coreboot.org/3037 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08exynos5250: add missing address-of operator in UART driverDavid Hendricks
This adds a missing address-of operator. This was a subtle bug that didn't seem to cause problems at first since the serial console appeared to work. However it caused an imprecise external abort which became apparent later on when aborts were unmasked in the kernel via the CPSR_A bit. (credit goes to Gabe Black for finding this) Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: David Hendricks <dhendrix@chromium.org> Change-Id: I80a33b147d92d559fa8fefbe7d5642235deb9aea Reviewed-on: http://review.coreboot.org/3038 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-08snow/exynos5250: move board-specific power stuff to mainboard dirDavid Hendricks
This moves highly board-specific code out from the Exynos5250 power_init() into Snow's romstage.c. There's no reason the CPU- specific code should care about which PMIC we are using and which bus it is on. Change-Id: I52313177395519cddcab11225fc23d5e50c4c4e3 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3034 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-06exynos5250: add a chip.h file for the display register settingsRonald G. Minnich
Display hardware is part of this SOC, and we need to be able to set certain variables in devicetree.cb. This chip file contains the initial things we think we need to set. Change-Id: I16f2d4228c87116dbeb53a3c9f3f359a6444f552 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3031 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-04-05mtrr: add rom caching comment about hyperthreadsAaron Durbin
Explicitly call out the effects of hyperthreads running the MTRR code and its impact on the enablement of ROM caching. Change-Id: I14b8f3fdc112340b8f483f2e554c5680576a8a7c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3018 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-05exynos5-common: get rid of displayport trial codeRonald G. Minnich
This was a first pass at display port support, we have realized that it was ultimately a bad path. The display hardware is intimately tied into a specific cpu and mainboard combination, and the code has to be elsewhere. The devicetree formatting is ugly, but it matters not: it's changing soon. Change-Id: Iddce54f9e7219a7569315565fac65afbbe0edd29 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: http://review.coreboot.org/3029 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-04AMD: Drop six copies of wrmsr_amd and rdmsr_amdKyösti Mälkki
Based on comments in cpu/x86/msr.h for wrmsr/rdmsr, and for symmetry, I have added __attribute__((always_inline)) for these. Change-Id: Ia0a34c15241f9fbc8c78763386028ddcbe6690b1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2898 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-04AMD GX1: Remove useless copied header file `northbridge.h`Paul Menzel
This was there since the beginning commit d24d6993b6d7bcf7977d74d081e718e1b076d1b0 Author: arch import user (historical) <svn@openbios.org> Date: Wed Jul 6 17:06:46 2005 +0000 Revision: linuxbios@linuxbios.org--devel/freebios--devel--2.0--patch-26 Creator: Hamish Guthrie <hamish@prodigi.ch> Added AMD GX1 northbridge and cs5530 Southbridge but blindly copied from Intel 440 BX and is not used anywhere. Thanks to Idwer Vollering for spotting this. Change-Id: I38b3d3feb25966c3aa382994d323e59c3f3c9e6c Reported-by: Idwer Vollering Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3020 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: build bot (Jenkins)
2013-04-03lynxpoint: Cosmetic cleanupStefan Reinauer
src/southbridge/intel/lynxpoint/pmutil.c was committed with two things that needed fixing. Change-Id: Ib83343a75840aa29847b607b0275971eb8140f12 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3003 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-04-03Partially revert "AMD Inagua: broadcom.c: Add missing prototype for ↵Jens Rottmann
`broadcom_init()`" Commit 5d741567 added a prototype to broadcom.c to fix a warning. This part is fine. It also changed mainboard.c to #include broadcom.c. But broadcom.c is already in Makefile.inc, now building will fail because the linker gets broadcom_init() twice. Undo the change to mainboard.c but keep the change to broadcom.c. Change-Id: Ieccc098f477ffacccf4174056998034a220a9744 Signed-off-by: Jens Rottmann <JRottmann@LiPPERTembedded.de> Reviewed-on: http://review.coreboot.org/3012 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-03sandybridge: enable ROM cachingAaron Durbin
If ROM caching is selected the sandybridge chipset code will will enable ROM caching after all other CPU threads are brought up. Change-Id: I3a57ba8753678146527ebf9547f5fbbd4f441f43 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3017 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: enable ROM cachingAaron Durbin
If ROM caching is selected the haswell CPU initialization code will enable ROM caching after all other CPU threads are brought up. Change-Id: I75424bb75174bfeca001468c3272e6375e925122 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3016 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: keep ROM cache enabledAaron Durbin
The MP code on haswell was mirroring the BSPs MTRRs. In addition it was cleaning up the ROM cache so that the MTRR register values were the same once the OS was booted. Since the hyperthread sibling of the BSP was going through this path the ROM cache was getting torn down once the hyperthread was brought up. That said, there was no differnce in observed boot time keeping the ROM cache enabled. Change-Id: I2a59988fcfeea9291202c961636ea761c2538837 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3008 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03haswell: use new interface to disable rom cachingAaron Durbin
The haswell code was using the old assumption of which MTRR was used for the ROM cache. Now that there is an API for doing this use it as the old assumption is no longer valid. Change-Id: I59ef897becfc9834d36d28840da6dc4f1145b0c7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3007 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-03intel/microcode.h: Fix typo in comment: micr*o*codePaul Menzel
Introduced in commit »intel microcode: split up microcode loading stages« (98ffb426) [1]. [1] http://review.coreboot.org/2778 Change-Id: I626508b10f3998b43aaabd49853090b36f5d3eb0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2992 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-04-03Add PXE ROM selection to Kconfig menuSiyuan Wang
Adding a pxe rom manually is inconvenient. With this patch, PXE ROM can be added automatically by selecting PXE_ROM in Kconfig. I have tested this patch on AMD Parmer and Thatcher with iPXE. iPXE would be a boot device in Seabios when pressing F12. iPXE works well with coreboot and Seabios. Change-Id: I2c4fc73fd9ae6c979f0af2290d410935f600e2c8 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3013 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-03ASRock E350M1: Kconfig: Remove `WARNINGS_ARE_ERRORS` to treat warnings as errorsPaul Menzel
Now that the ASRock E350M1 builds without any warnings, remove the config option `WARNINGS_ARE_ERRORS` set to no by default from the file `Kconfig` so warnings are treated as errors to prevent code from being added in the future introducing warnings. Change-Id: Idfecfb1434158969334a4b37972b5fc6fd76e72a Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3014 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-04-02ASRock E350M1: buildOpts.c: Add missing memory related definesPaul Menzel
When building the ASRock E350M1, the following warnings are shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/buildOpts.romstage.o In file included from src/mainboard/asrock/e350m1/buildOpts.c:294:0: src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2071:6: warning: "DDR1333_FREQUENCY" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2071:40: warning: "DDR1866_FREQUENCY" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2089:5: warning: "TIMING_MODE_AUTO" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2089:31: warning: "TIMING_MODE_SPECIFIC" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2113:5: warning: "QUADRANK_UNBUFFERED" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2113:33: warning: "QUADRANK_UNBUFFERED" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2127:5: warning: "POWER_DOWN_BY_CHIP_SELECT" is not defined [-Wundef] src/vendorcode/amd/agesa/f14/Include/PlatformInstall.h:2127:28: warning: "POWER_DOWN_BY_CHIP_SELECT" is not defined [-Wundef] […] Adding the corresponding defines as done for AMD Persimmon in commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 addresses the warnings. Change-Id: Id311b2dacdba5f2e6b4d834e43db0310213a35f9 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2962 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-04-01lynxpoint: Move ACPI NVS into separate CBMEM tableDuncan Laurie
The ACPI NVS region was setup in place and there was a CBMEM table that pointed to it. In order to be able to use NVS earlier the CBMEM region is allocated for NVS itself during the LPC device init and the ACPI tables point to it in CBMEM. The current cbmem region is renamed to ACPI_GNVS_PTR to indicate that it is really a pointer to the GNVS and does not actually contain the GNVS. Change-Id: I31ace432411c7f825d86ca75c63dd79cd658e891 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2970 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01boot: add disable_cache_rom() functionAaron Durbin
On certain architectures such as x86 the bootstrap processor does most of the work. When CACHE_ROM is employed it's appropriate to ensure that the caching enablement of the ROM is disabled so that the caching settings are symmetric before booting the payload or OS. Tested this on an x86 machine that turned on ROM caching. Linux did not complain about asymmetric MTRR settings nor did the ROM show up as cached in the MTRR settings. Change-Id: Ia32ff9fdb1608667a0e9a5f23b9c8af27d589047 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2980 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01lynxpoint: Basic configuration of SerialIO devicesDuncan Laurie
This adds configuration of SerialIO devices in the Lynxpoint-LP chipset. This includes DMA, I2C, SPI, UART, and SDIO controllers. There is assorted magic setup necessary for the devices and while it is similar for each device there are subtle differences in some register settings. These devices must be put into "ACPI Mode" in order to take advantage of S0ix. When in ACPI mode the allocated PCI BARs must be passed to ACPI so it can be relayed to the OS. When the devices are in ACPI mode BAR0+BAR1 is saved into ACPI NVS and then updated and returned when the OS calls _CRS. Note that is is not entirely complete yet. We need to update the IASL compiler in our build environment to support ACPI 5.0 in order to be able to pass the FixedDMA entries to the kernel. There are also no ACPI methods defined yet to do D0->D3->D0 transitions for actually entering/exiting S0ix states. This is hard to test right now because our kernel does not support any of these devices in ACPI mode. I was able to build and test the upstream bleeding-edge branch of the linux-pm git tree. With that tree I was able to enumerate and load the driver for the DesignWare I2C driver and attempt to probe the I2C bus -- although there are no devices attatched. I am also able to see the resources from ACPI in /proc/iomem get reserved properly in the kernel. Change-Id: Ie311addd6a25f3b7edf3388fe68c1cd691a0a500 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2971 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01wtm2: Enable SerialIO devices in ACPI modeDuncan Laurie
This enables all of the SerialIO devices and sets the flag to put them in ACPI mode. Change-Id: I7436c47d26028e95bbefafc320854c7cc34a4d44 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2972 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: Fix LP clock gating setup for LPCDuncan Laurie
This bit offset is incorrect and should only be set based on another bit in a different register. Change-Id: I6037534236e3a4a5d15e15011ed9b5040b435eaf Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2973 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01Minor Kconfig help text fixStefan Tauner
I did not check what was once after the 'and'. Change-Id: I9f3f725bec281a94abdb2eeb692a96fecdebcc0c Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/2999 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01chromeos: honor MOCK_TPM=1Aaron Durbin
The TPM code wasn't previously honoring MOCK_TPM=1. Because of this, boards with TPMs that didn't handle S3 resume properly would cause a hard reset. Allow one to build with MOCK_TPM=1 on the command line so that S3 can still work. Change-Id: I9adf06647de285c0b0a3203d8897be90d7783a1e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2976 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: fix enable_pm1() functionAaron Durbin
The new enable_pm1() function was doing 2 things wrong: 1. It was doing a RMW of the pm1 register. This means we were keeping around the enables from the OS during S3 resume. This is bad in the face of the RTC alarm waking us up because it would cause an infinite stream of SMIs. 2. The register size of PM1_EN is 16-bits. However, the previous implementation was accessing it as a 32-bit register. The PM1 enables should only be set to what we expect to handle in the firmware before the OS changes to ACPI mode. Change-Id: Ib1d3caf6c84a1670d9456ed159420c6cb64f555e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2978 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01lynxpoint: split clearing and enabling of smmAaron Durbin
Previously southbridge_smm_init() was provided that did both the clearing of the SMM state and enabling SMIs. This is troublesome in how haswell machines bring up the APs. The BSP enters SMM once to determine if parallel SMM relocation is possible. If it is possible the BSP releases the APs to do SMM relocation. Normally, after the APs complete the SMM relocation, the BSP would then re-enter the relocation handler to relocate its own SMM space. However, because SMIs were previously enabled it is possible for an SMI event to occur before the APs are complete or have entered the relocation handler. This is bad because the BSP will turn off parallel SMM save state. Additionally, this is a problem because the relocation handler is not written to handle regular SMIs which can cause an SMI storm which effectively looks like a hung machine. Correct these issues by turning on SMIs after all the SMM relocation has occurred. Change-Id: Id4f07553b110b9664d51d2e670a14e6617591500 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2977 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-01Winbond W83627HF: Rename and move ASL snippet to `acpi/superio.asl`Paul Menzel
Put the ASL snippet for inclusion in the DSDT under the `acpi/` folder as it is done for the other Super I/O devices. $ find src/superio/ -name *asl src/superio/ite/it8772f/acpi/superio.asl src/superio/smsc/mec1308/acpi/superio.asl src/superio/smsc/sio1007/acpi/superio.asl src/superio/winbond/w83627hf/devtree.asl As there are no users of this file yet, no other adaptations need to be made. Change-Id: Id10cd8897592b780c9fd3bd6b45ada4cf1fcf33e Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2937 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mptable.c: Remove unused variable `dev`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mptable.ramstage.o src/mainboard/asrock/e350m1/mptable.c:64:12: warning: unused variable 'dev' [-Wunused-variable] […] Removing the variable `dev` addresses the warning. The same change was done in the following commit for the AMD Persimmon board. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I83f4630cb6ab1e4c95d04b4e8423850ed1858e45 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2965 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mptable.c: Include `cpu/amd/amdfam14.h` for `get_bus_conf`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mptable.ramstage.o src/mainboard/asrock/e350m1/mptable.c: In function 'smp_write_config_table': src/mainboard/asrock/e350m1/mptable.c:58:3: warning: implicit declaration of function 'get_bus_conf' [-Wimplicit-function-declaration] […] Including the header file `cpu/amd/amdfam14.h` declaring the function addresses this warning. The same change was done in the following commit for the AMD Persimmon board. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I7912571fa57f6512b10fc9b5845427fcb6eb50c0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2966 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01ASRock E350M1: mainboard.c: Include `cimx_util.h` for `pm_iowrite`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/mainboard.ramstage.o src/mainboard/asrock/e350m1/mainboard.c: In function 'mainboard_enable': src/mainboard/asrock/e350m1/mainboard.c:63:2: warning: implicit declaration of function 'pm_iowrite' [-Wimplicit-function-declaration] […] This warning was introduced by moving the initialization of the ASF registers using `pm_iowrite` to `mainboard.c` in commit db6c5bfd8bdef4489e7fec533cb2ca8ae6c24cf3 Author: Jens Rottmann <JRottmann@LiPPERTembedded.de> Date: Thu Mar 21 22:21:28 2013 +0100 Asrock E350M1: Use SPD read code from F14 wrapper Reviewed-on: http://review.coreboot.org/2875 and is fixed by including `southbridge/amd/cimx/cimx_util.h` declaring `pm_iowrite`. Note, that the other AMD SB800 based boards seem to use the header file `southbridge/amd/sb800/sb800.h`, so no warning is shown for those. But since the CIMx SB800 code is used, the routines from the CIMx directory are more appropriate to declare these functions. So delete the commented out include line for this header too. Change-Id: I179aad5157c5a91294339a3e7b6c4c1715c6f099 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2957 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01wtm2: select write-combining memory for graphicsAaron Durbin
Auto-select marking the graphics memory as write-combining. Change-Id: Icf61c5cbd129a97a106f0aaeca4e010d4799b4b8 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2981 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01link: select write-combining memory for graphicsAaron Durbin
Auto-select marking the graphics memory as write-combining. Change-Id: I0b913f0b318bf57275643d3cfb5bc54ca8a005f5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2982 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01pci: don't load vga option rom before S3 checkAaron Durbin
The pci device code was probing and loading the option rom before it did the S3 resume check for VGA option roms. Instead move this check before probing and loading so that we don't unnecessarily do work. Change-Id: If2e62d0c0e4b34b4f1bcd56ebcb9d3f54c6d0d24 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2979 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-04-01console: Make use of CONFIG_USE_OPTION_TABLEChristian Gmeiner
It makes much more sense to use CONFIG_USE_OPTION_TABLE instead of CONFIG_HAVE_CMOS_DEFAULT. As we want to read the used debug_level from our CMOS. This change makes it possible to change log_debug via nvramtool and make use of the new value after a reboot/poweroff. CONFIG_HAVE_CMOS_DEFAULT does have an other meaning Change-Id: I438dd01a2b4171dba2b73f2001511c71f4317725 Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-on: http://review.coreboot.org/2381 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-04-01AMD hudson & SB800 - Fix issues with mawkMartin Roth
When calculating the offsets of the various binary blobs within the coreboot.rom file, we noticed that using mawk as the awk tool instead of using gawk led to build issues. This was finally traced to the maximum value of the unsigned long variables within mawk - 0x7fff_ffff. Because we were doing calculations on values up in the 0xffxxxxxx range, these numbers would either be turned into floating point values and printed using scientific notation, or truncated at 0x7fff_ffff. To fix this, we print the values out as floating point, with no decimal digits. This works in gawk, mawk, and original-awk and as the testing below show, seems to be the best way to do this. printf %u 0xFFFFFFFF | awk '{printf("%.0f %u %d", $1 , $1 , $1 )}' mawk: 4294967295 2147483647 2147483647 original-awk: 4294967295 2147483648 4294967295 gawk: 4294967295 4294967295 4294967295 The issue of %d not matching gawk and original-awk has been reported to ubuntu. In the future, I'd recommend that whenever awk is used, a format is specified. It doesn't seem that we can count on the representation being the same between the different versions. Change-Id: I7b6b821c8ab13ad11f72e674ac726a98e8678710 Signed-off-by: Martin Roth <martin.roth@se-eng.com> Reviewed-on: http://review.coreboot.org/2628 Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-01lynxpoint: Rework ACPI NVS to add new SerialIO variablesDuncan Laurie
This reclaims space in ACPI NVS by removing unused fields and adds new fields for SerialIO BARs which will be used to communicate the allocated resources to ACPI. Change-Id: I002bf396cf7b495bc5b7e54b741527e507aff716 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2969 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30wtm1/wtm2/baskingridge: Enable TPM ACPI deviceDuncan Laurie
This enables the TPM device in ACPI tables so the OS is able to probe for the TPM without needing it be force loaded. Change-Id: I21e660ac1c12e3e1341cf266cf8f0bf03763df5a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2968 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-30x86: Drop BOARD_HAS_FADTKyösti Mälkki
There is a wildcard rule to include mainboard/fadt.c. Change-Id: I7f59d6b241c683b62c2c41c5795e45184882635e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/2940 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-30AMD Hudson boards: Use `hudson.h` for `pm_ioread` and delete `pmio.h`Paul Menzel
Unfortunately, an unneeded mainboard specific `pmio.h` was created when merging the AMD Parmer and Thatcher ports. Rudolf used the header from a more generic location southbridge/amd/agesa/hudson/hudson.h doing the the ASUS F2A85-M port, but did not delete the `pmio.h` now unused `pmio.h` header file. So adapt AMD Parmer and Thatcher to use the Hudson one as done for the ASUS F2A85-M and delete the now unused mainboard specific header file `pmio.h` to avoid duplication. Change-Id: I961cd145ebc3b83e31c638ac453ac95ee19c18db Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2958 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-30ASRock E350M1: irq_tables.c: Include `cpu/amd/amdfam14.h` for `get_bus_conf`Paul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/irq_tables.ramstage.o src/mainboard/asrock/e350m1/irq_tables.c: In function 'write_pirq_routing_table': src/mainboard/asrock/e350m1/irq_tables.c:64:2: warning: implicit declaration of function 'get_bus_conf' [-Wimplicit-function-declaration] […] Including the header file `cpu/amd/amdfam14.h` declaring the function addresses this warning. The same change was done in the following commit for the AMD Persimmon board. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I40b5735feb7116961ca0c4d6940ec55cdf42d3c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2956 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-30ASRock E350M1: get_bus_conf.c: Include `agesawrapper.h` for ↵Paul Menzel
`agesawrapper_amdinitlate` When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/get_bus_conf.ramstage.o src/mainboard/asrock/e350m1/get_bus_conf.c: In function 'get_bus_conf': src/mainboard/asrock/e350m1/get_bus_conf.c:82:3: warning: implicit declaration of function 'agesawrapper_amdinitlate' [-Wimplicit-function-declaration] […] Including the header file `agesawrapper.h` declaring the function `agesawrapper_amdinitlate` fixes this warning. All AMD Family 14 based boards already include that header file. For example for the board AMD Persimmon the following patch fixed this warning. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 Change-Id: I695420b7071e07cb7d4667b2479b9a26ea13723d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2955 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-30ASRock E350M1: PlatformGnbPcie.c: Do not return anything for void return typePaul Menzel
When building the ASRock E350M1, the following warning is shown. $ make # on Jenkins (build server) […] CC mainboard/asrock/e350m1/PlatformGnbPcie.romstage.o CC mainboard/asrock/e350m1/agesawrapper.romstage.o CC mainboard/asrock/e350m1/buildOpts.romstage.o src/mainboard/asrock/e350m1/PlatformGnbPcie.c: In function 'OemCustomizeInitEarly': src/mainboard/asrock/e350m1/PlatformGnbPcie.c:131:5: warning: 'return' with a value, in function returning void [enabled by default] […] The function signature is (the return type might not be part of this though [1]), VOID OemCustomizeInitEarly ( IN OUT AMD_EARLY_PARAMS *InitEarly ) so do not return anything. All other AMD Family 14 boards already have the correct code. For example following commit fixed this for AMD Persimmon. commit d7a696d0f229abccc95ff411f28d91b9b796ab74 Author: efdesign98 <efdesign98@gmail.com> Date: Thu Sep 15 15:24:26 2011 -0600 Persimmon updates for AMD F14 rev C0 Reviewed-on: http://review.coreboot.org/137 [1] http://cboard.cprogramming.com/cplusplus-programming/117286-what-exactly-function-signature.html Change-Id: Ie60246bd9bb8452efd096e6838d8610f6364a6aa Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2954 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com>
2013-03-30armv7: change some unsigned ints to uint32_tDavid Hendricks
Use register-sized types in case the inline assembler doesn't do so automatically. Change-Id: I3202ba972ef2548323fe557f45dc4b0b1cf6c818 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2983 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: remove loop from dcache_mmu_disable()David Hendricks
dcache_mmu_disable() no longer needs to have its own iterative loop to select each cache level of cache since dcache_clean_invalidate_all() does that now. Change-Id: I5ca273f98943981b943c1c1622f4574d7133fb50 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2967 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29snow: explicitly configure L2 cacheDavid Hendricks
This adds a call to explicitly configure L2 cache (though defaults should be set correctly). Change-Id: I120e29c986918c2904a0332e46fcf9f1c5380d85 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2950 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29exynos5250: Add function for configuring L2 cacheDavid Hendricks
This adds a new function to configure L2 cache for the exynos5250 and deprecates the old function. Change-Id: I9562f3301aa1e2911dae3856ab57bb6beec2e224 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2949 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29AMD CIMx SB800: Update Kconfig help texts to new SATA mode defaultPaul Menzel
In the following commit commit ee5c111755ac4acc6dfb6e10a4e271211e149a39 Author: Paul Menzel <paulepanter@users.sourceforge.net> Date: Tue Mar 12 12:41:40 2013 +0100 AMD CIMx SB800: Enable AHCI mode for SATA controller by default Reviewed-on: http://review.coreboot.org/2661 I forgot to update the help texts to the new SATA mode default. Do so now. Additionally note that help texts for `choice` do not seem to be shown. Change-Id: I17f401633a2136efca2b21a621482e0724ff9f04 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2936 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: update sync barrier usage in dcache_op_set_way()David Hendricks
This moves the dsb() before the loop to sync any outstanding memory accesses, and adds an isb() after the loop to ensure all outstanding instructions are completed. Change-Id: I1a11b39f104ae780370cfd2db3badcf4e91dc017 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2929 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29wtm2: auto-select CACHE_ROMAaron Durbin
The WTM2 board has a fairly static configuration. As such it's been tested to properly handle CACHE_ROM given the number of MTRRs the boards' CPUs supports. Change-Id: Ic67cd1eebce580003dc6b6655cac2b2a92dd1b5f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2964 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29AMD Inagua: Kconfig: Remove `WARNINGS_ARE_ERRORS` to treat warnings as errorsPaul Menzel
Now that the AMD Inagua builds without any warnigs, remove the config option `WARNINGS_ARE_ERRORS` set to no by default from the file `Kconfig` so warnings are treated as errors to prevent code from being added in the future introducing warnings. Change-Id: I0b58bd74b06dc54d180b16d6a207354b5fea0d0f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2953 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29AMD Inagua: broadcom.c: Add missing prototype for `broadcom_init()`Paul Menzel
Building the AMD Inagua board, the following warning is thrown. CC mainboard/amd/inagua/get_bus_conf.ramstage.o src/mainboard/amd/inagua/broadcom.c:319:6: warning: no previous prototype for 'broadcom_init' [-Wmissing-prototypes] This warning was introduced by commit 3926b4c5. commit 3926b4c520e74da9dc22e3d136a8a178483e0d25 Author: Jens Rottmann <JRottmann@LiPPERTembedded.de> Date: Fri Mar 1 19:41:41 2013 +0100 AMD Inagua: add GEC firmware, document Broadcom BCM57xx Selfboot Patch format Reviewed-on: http://review.coreboot.org/2831 Adding the prototype to `broadcom.c` and removing it from `mainboard.c` fixes the warning. Change-Id: I1da0c4e972e129047dd8230d573f1c43fd71eb20 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2952 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29google boards: auto-select CACHE_ROMAaron Durbin
Automatically select CACHE_ROM for all Google boards. Tested by generating a config for the link board. CACHE_ROM was selected and was unable to unselect it using 'make oldconfig'. Change-Id: I8e34207e3929a020bb0280657f95ba7a000ad024 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2963 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29x86: mtrr: optimize hole carving above 4GiBAaron Durbin
There is an optimization that can take place when hole carving in ranges above 4GiB. If the range is the last range then there is no need to carve UC holes out from the larger WB range. This optimization also has the same assumption of choosing WB as the default MTRR type: the OS needs to properly handle accessing realloacted MMIO resources with PAT so that the MTRR type can be overidden. Below are results using a combination of options. The board this was tested on has 10 variable MTRRs at its disposal. It has 4GiB of RAM. IO hole config #1: hole starts at 0xad800000 No CACHE_ROM and no WRCOMB resources (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x0000000100000000 size 0x52800000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 4/6. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 No CACHE_ROM and 1 WRCOMB resource (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 6/7. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (takes 7 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000ff800000 size 0x52000000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 11/7. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 6 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and 1 WRCOMB resource (takes 8 MTRRs): Previously this combination was impossible without the optimization. MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 12/8. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 6 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 7 base 0x0000000100000000 mask 0x0000007f00000000 type 6 IO hole config #1: hole starts at 0x80000000 No CACHE_ROM and no WRCOMB resources (takes 1 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x0000000100000000 size 0x80000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 1/2. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007f80000000 type 0 No CACHE_ROM and 1 WRCOMB resource (takes 3 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 4/3. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and no WRCOMB resources (takes 3 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000ff800000 size 0x7f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 9/3. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 2 base 0x0000000100000000 mask 0x0000007f00000000 type 6 CACHE_ROM and 1 WRCOMB resource (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 10/4. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 3 base 0x0000000100000000 mask 0x0000007f00000000 type 6 Change-Id: Ia3195af686c3f0603b21f713cfb2d9075eb02806 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2959 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: mtrr: add hole punching supportAaron Durbin
Some ranges would use less variable MTRRs if an UC area can be carved off the top of larger WB range. Implement this approach by doing 3 passes over each region in the addres space: 1. UC default type. Cover non-UC and non-WB regions with respectie type. Punch UC hole at upper end of larger WB regions with WB type. 2. UC default type. Cover non-UC regions with respective type. 3. WB default type. Cover non-WB regions with respective type. The hole at upper end of a region uses the same min alignment of 64MiB. Below are results using a combination of options. The board this was tested on has 10 variable MTRRs at its disposal. It has 4GiB of RAM. IO hole config #1: hole starts at 0xad800000 No CACHE_ROM or WRCOMB resources (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x0000000100000000 size 0x52800000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 4/9. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0 No CACHE_ROM. 1 WRCOMB resource (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 6/10. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (taks 10 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000ff800000 size 0x52000000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 MTRR: default type WB/UC MTRR counts: 11/10. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x0000000080000000 mask 0x0000007fe0000000 type 6 MTRR: 2 base 0x00000000a0000000 mask 0x0000007ff0000000 type 6 MTRR: 3 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 4 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 5 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 6 base 0x0000000100000000 mask 0x0000007fc0000000 type 6 MTRR: 7 base 0x0000000140000000 mask 0x0000007ff0000000 type 6 Taking a reserved OS MTRR. MTRR: 8 base 0x000000014f600000 mask 0x0000007fffe00000 type 0 Taking a reserved OS MTRR. MTRR: 9 base 0x000000014f800000 mask 0x0000007fff800000 type 0 A combination of CACHE_ROM and WRCOMB just won't work. IO hole config #2: hole starts at 0x80000000: No CACHE_ROM or WRCOMB resources (takes 1 MTRR): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x0000000100000000 size 0x80000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 1/5. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007f80000000 type 0 No CACHE_ROM. 1 WRCOMB resource (takes 4 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 4/6. MTRR: WB selected as default type. MTRR: 0 base 0x0000000080000000 mask 0x0000007fc0000000 type 0 MTRR: 1 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 2 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 3 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 CACHE_ROM and no WRCOMB resources (takes 6 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000ff800000 size 0x7f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 9/6. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 2 base 0x0000000100000000 mask 0x0000007f80000000 type 6 MTRR: 3 base 0x000000017ce00000 mask 0x0000007fffe00000 type 0 MTRR: 4 base 0x000000017d000000 mask 0x0000007fff000000 type 0 MTRR: 5 base 0x000000017e000000 mask 0x0000007ffe000000 type 0 CACHE_ROM and 1 WRCOMB resource (takes 7 MTRRs): MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6 0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x00000000ff800000 size 0x1f800000 type 0 0x00000000ff800000 - 0x0000000100000000 size 0x00800000 type 5 0x0000000100000000 - 0x000000017ce00000 size 0x7ce00000 type 6 MTRR: default type WB/UC MTRR counts: 10/7. MTRR: UC selected as default type. MTRR: 0 base 0x0000000000000000 mask 0x0000007f80000000 type 6 MTRR: 1 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 2 base 0x00000000ff800000 mask 0x0000007fff800000 type 0 MTRR: 3 base 0x0000000100000000 mask 0x0000007f80000000 type 6 MTRR: 4 base 0x000000017ce00000 mask 0x0000007fffe00000 type 0 MTRR: 5 base 0x000000017d000000 mask 0x0000007fff000000 type 0 MTRR: 6 base 0x000000017e000000 mask 0x0000007ffe000000 type 0 Change-Id: Iceb9b64991accf558caae2e7b0205951e9bcde44 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2925 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29memrange: add 2 new range_entry routinesAaron Durbin
Two convenience functions are added to operate on a range_entry: - range_entry_update_tag() - update the entry's tag - memranges_next_entry() - get the next entry after the one provide These functions will be used by a follow on patch to the MTRR code to allow hole punching in WB region when the default MTRR type is UC. Change-Id: I3c2be19c8ea1bbbdf7736c867e4a2aa82df2d611 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2924 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29chromeos: remove CACHE_ROM automatic selectionAaron Durbin
It's not appropriate for the chromeos Kconfig to automatically select CACHE_ROM. The reason is that enabling CACHE_ROM is dependent on the board and chipset atrributes. Change-Id: I47429f1cceefd40226c4b943215d627a3c869c7b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2921 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: add rom cache variable MTRR index to tablesAaron Durbin
Downstream payloads may need to take advantage of caching the ROM for performance reasons. Add the ability to communicate the variable range MTRR index to use to perform the caching enablement. An example usage implementation would be to obtain the variable MTRR index that covers the ROM from the coreboot tables. Then one would disable caching and change the MTRR type from uncacheable to write-protect and enable caching. The opposite sequence is required to tearn down the caching. Change-Id: I4d486cfb986629247ab2da7818486973c6720ef5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2919 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29sandybridge: add option to mark graphics memory write-combining.Aaron Durbin
The graphics memory can be accessed in a faster manner by setting it to write-combing mode. Add an option to enable write-combining for the graphics memory. Change-Id: I7d37fd78906262aabef92c2b4f4cab0e3f7e4f6d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29haswell: add option to mark graphics memory write-combining.Aaron Durbin
The graphics memory can be accessed in a faster manner by setting it to write-combing mode. Add an option to enable write-combining for the graphics memory. Change-Id: I797fcd9f0dfb074f9e45476773acbfe614eb4b0a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2893 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: mtrr: add CONFIG_CACHE_ROM supportAaron Durbin
The CONFIG_CACHE_ROM support in the MTRR code allocates an MTRR specifically for setting up write-protect cachine of the ROM. It is assumed that CONFIG_ROM_SIZE is the size of the ROM and the whole area should be cached just under 4GiB. If enabled, the MTRR code will allocate but not enable rom caching. It is up to the callers of the MTRR code to explicitly enable (and disable afterwards) through the use of 2 new functions: - x86_mtrr_enable_rom_caching() - x86_mtrr_disable_rom_caching() Additionally, the CACHE_ROM option is exposed to the config menu so that it is not just selected by the chipset or board. The reasoning is that through a multitude of options CACHE_ROM may not be appropriate for enabling. Change-Id: I4483df850f442bdcef969ffeaf7608ed70b88085 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2918 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29mtrr: honor IORESOURCE_WRCOMBAaron Durbin
All resources that set the IORESOURCE_WRCOMB attribute which are also marked as IORESOURCE_PREFETCH will have a MTRR set up that is of the write-combining cacheable type. The only resources on x86 that can be set to write-combining are prefetchable ones. Change-Id: Iba7452cff3677e07d7e263b79982a49c93be9c54 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2892 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29lib: add memrange infrastructureAaron Durbin
The memrange infrastructure allows for keeping track of the machine's physical address space. Each memory_range entry in a memory_ranges structure can be tagged with an arbitrary value. It supports merging and deleting ranges as well as filling in holes in the address space with a particular tag. The memrange infrastructure will serve as a shared implementation for address tracking by the MTRR and coreboot mem table code. Change-Id: Id5bea9d2a419114fca55c59af0fdca063551110e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2888 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29stdlib: add ALIGN_UP and ALIGN_DOWN macrosAaron Durbin
There wasn't an equivalent to align down so add ALIGN_DOWN. For symmetry provide an ALIGN_UP macro as well. Change-Id: I7033109311eeb15c8c69c649878785378790feb9 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2951 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29resources: introduce IORESOURCE_WRCOMBAaron Durbin
Certain MMIO resources can be set to a write-combining cacheable mode to increase performance. Typical resources that use this would be graphics memory. Change-Id: Icd96c720f86f7e2f19a6461bb23cb323124eb68e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2891 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29resources: remove IORESOURCE_[UMA_FB|IGNORE_MTRR]Aaron Durbin
The IORESOURCE_UMA_FB and IORESOURCE_IGNORE_MTRR attributes on a resource provided hints to the MTRR algorithm. The IORESOURCE_UMA_FB directed the MTRR algorithm to setup a uncacheable space for the resource. The IORESOURCE_IGNORE_MTRR directed the MTRR algorithm to ignore this resource as it was used reserving RAM space. Now that the optimizing MTRR algorithm is in place there isn't a need for these flags. All IORESOURCE_IGNORE_MTRR users are handled by the MTRR code merging resources of the same cacheable type. The users of the IORESOURCE_UMA_FB will find that the default MTRR type calculation means there isn't a need for this flag any more. Change-Id: I4f62192edd9a700cb80fa7569caf49538f9b83b7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29x86: add new mtrr implementationAaron Durbin
The old MTRR code had issues using too many variable MTRRs depending on the physical address space layout dictated by the device resources. This new implementation calculates the default MTRR type by comparing the number of variable MTRRs used for each type. This avoids the need for IORESOURE_UMA_FB because in many of those situations setting the default type to WB frees up the variable MTTRs to set that space to UC. Additionally, it removes the need for IORESOURCE_IGNORE_MTRR becuase the new mtrr uses the memrange library which does merging of resources. Lastly, the sandybridge gma has its speedup optimization removed for the graphics memory by writing a pre-determined MTRR index. That will be fixed in an upcoming patch once write-combining support is added to the resources. Slight differences from previous MTRR code: - The number of reserved OS MTRRs is not a hard limit. It's now advisory as PAT can be used by the OS to setup the regions to the caching policy desired. - The memory types are calculated once by the first CPU to run the code. After that all other CPUs use that value. - CONFIG_CACHE_ROM support was dropped. It will be added back in its own change. A pathological case that was previously fixed by changing vendor code to adjust the IO hole location looked like the following: MTRR: Physical address space: 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 0x00000000000c0000 - 0x00000000ad800000 size 0xad740000 type 6 0x00000000ad800000 - 0x00000000d0000000 size 0x22800000 type 0 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 0x0000000100000000 - 0x000000014f600000 size 0x4f600000 type 6 As noted by the output below it's impossible to accomodate those ranges even with 10 variable MTRRS. However, because the code can select WB as the default MTRR type it can be done in 6 MTRRs: MTRR: default type WB/UC MTRR counts: 6/14. MTRR: WB selected as default type. MTRR: 0 base 0x00000000ad800000 mask 0x0000007fff800000 type 0 MTRR: 1 base 0x00000000ae000000 mask 0x0000007ffe000000 type 0 MTRR: 2 base 0x00000000b0000000 mask 0x0000007ff0000000 type 0 MTRR: 3 base 0x00000000c0000000 mask 0x0000007ff0000000 type 0 MTRR: 4 base 0x00000000d0000000 mask 0x0000007ff0000000 type 1 MTRR: 5 base 0x00000000e0000000 mask 0x0000007fe0000000 type 0 Change-Id: Idfcc78d9afef9d44c769a676716aae3ff2bd79de Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2889 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-03-29coreboot table: use memrange libraryAaron Durbin
Use the memrange library for keeping track of the address space region types. The memrange library is built to do just that for both the MTRR code and the coreboot memtable code. Change-Id: Iee2a7c37a3f4cf388db87ce40b580f274384ff3c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2917 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: set cache level explicitly for dcache/unified cache caseDavid Hendricks
This adds a missing CSSELR write in the case of a dcache or unified cache being invalidated by armv7_invalidate_caches(), ensuring that all levels of dcache/unified cache are invalidated as expected when the function is called. Change-Id: Ie90184bf8a8181afa3afe0786897455b30b7f022 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2947 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: invalidate TLB after changing translation table entriesDavid Hendricks
This adds a call to tlb_invalidate_all() after configuring a range of memory. Change-Id: I558402e7e54b6bf9e0b013f153d9b84c0873a6cf Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2946 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: iterate thru all levels when doing dcache opsDavid Hendricks
This makes dcache maintenance functions operate on all levels of cache instead of just the current one. Change-Id: I2708fc7ba6da6740dbdfd733d937e7c943012d62 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2945 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-29armv7: add functions for reading/writing L2CTLRDavid Hendricks
This adds simple accessor functions for reading/writing L2CTLR. Change-Id: I2768d00d5bb2c43e84741ccead81e529dac9254d Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2948 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: use stdint.h in cache and MMU filesDavid Hendricks
This makes it easier to copy + paste code into libpayload since libpayload since both coreboot and libpayload have stdint.h and it defines the types needed. Change-Id: Ifa55f04a9bdddd17bc1a2679321a6744c75f25a8 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2944 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-29armv7: added paranoia for cache libraryDavid Hendricks
This adds some paranoia to cache manipulation routines: - "memory" is added to the clobber list for functions which clean and/or invalidate dcache or TLB entries. - Remove unneeded clobber list for read_sctlr() Change-Id: Iaa82ef78bfdad4119f097c3b6db8219f29f832bc Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-28armv7: clean+invalidate all cache levels when disabling MMUDavid Hendricks
This iterates thru all cache levels and cleans + invalidates all data and unified caches before disabling dcache and MMU. Change-Id: I8a671b4c90d7b88b8d0a95947bfa17f912cebaa2 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2930 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-28armv7: cosmetic changes to dcache_op_mva()David Hendricks
This is just a cosmetic change to dcache_op_mva() to (hopefully) make it a easier to follow and more difficult to screw up. Change-Id: Ia348b2d58f2f2bf5c3cafabcfba06bc411937dba Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2927 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-28armv7: fix a bad variable assignmentDavid Hendricks
'<' was used when '<<' is needed. Oops! Change-Id: I8451f76888e86219df16b50739cd2c8db80dcb14 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2941 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-28armv7: pass incremented value to dccimvacDavid Hendricks
This passes the correct value into dccimvac. Change-Id: I6098440ea48a9b6429380d5913fce6d36e3afb41 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2926 Reviewed-by: Gabe Black <gabe.black@gmail.com> Tested-by: build bot (Jenkins)
2013-03-27exynos5250: assign RAM resources in cpu_init()David Hendricks
This moves the ram resource allocation into cpu_init() so that we no longer rely on declaring a domain in devicetree.cb (which is kind of weird for this platform). This does not cause any actual changes to the coreboot memory table, and paves the way for further updates to Snow's devicetree. Change-Id: I141277f59b5d48288f409257bf556a1cfa7a8463 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2923 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-26armv7: fixes for dcache_op_by_mva()David Hendricks
This fixes a couple issues with dcache_op_by_mva(): - Add missing data and instruction sync barriers. - Removes unneded -1 from loop terminating condition. Change-Id: I098388614397c1e53079c017d56b1cf3ef273676 Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2913 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-26ARMv7: Drop ROMSTAGE_BASE from Makefile.incStefan Reinauer
It's not used (instead ARM puts it in Kconfig) Change-Id: Ia22a7ac756bec4cb6fee00a4d946a020ea6290aa Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2916 Reviewed-by: David Hendricks <dhendrix@chromium.org> Tested-by: build bot (Jenkins)
2013-03-26Revert "coreboot table: use memrange library"Aaron Durbin
This reverts commit 56075eaefcd7ef51464206166b24a0a47a59147f Change-Id: I8a37ce1f5ce36e4a120941ec264140abc9447ff5 Reviewed-on: http://review.coreboot.org/2915 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-03-26x86: dynamic cbmem: fix acpi reservationsAaron Durbin
If a configuration was not using RELOCTABLE_RAMSTAGE, but it was using HAVE_ACPI_RESUME then the ACPI memory was not being marked as reserved to the OS. The reason is that memory is marked as reserved during write_coreboot_table(). These reservations were being added to cbmem after the call to write_coreboot_table(). In the non-dynamic cbmem case this sequence is fine because cbmem area is a fixed size and is already reserved. For the dynamic cbmem case that no longer holds by the nature of the dynamic cbmem. Change-Id: I9aa44205205bfef75a9e7d9f02cf5c93d7c457b2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2897 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>