Age | Commit message (Expand) | Author |
2009-11-09 | These are post codes for TIM-5690 LED debug message. | Libra Li |
2009-11-06 | Remove drivers/pci/onboard. The only purpose was for option ROMs, which are | Myles Watson |
2009-11-06 | Remove some white space and comment differences from devicetree.cb and Config.lb | Myles Watson |
2009-11-06 | Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb. | Uwe Hermann |
2009-11-06 | Revert the deletion of drivers/pci/onboard that snuck in ahead of its time. | Myles Watson |
2009-11-06 | Split the two usages of __ROMCC__: | Myles Watson |
2009-11-06 | Remove hard coded bus numbers from arima/hdama mptable code and fix warnings. | Myles Watson |
2009-11-05 | Add debugging utility file for dumping routing registers on K8. | Myles Watson |
2009-11-05 | Don't try to set fixed resources. Trivial. | Myles Watson |
2009-11-05 | fix length field in dmi tables. Newer DMI versions through errors | Stefan Reinauer |
2009-11-05 | if x86emu was running for VGA init a corrupted low table RSDP | Stefan Reinauer |
2009-11-05 | http://www.coreboot.org/pipermail/coreboot/2007-October/025740.html | Stefan Reinauer |
2009-11-05 | If the coreboot and filo overlap, it will "slice off" a piece at the | Zheng Bao |
2009-11-05 | When loading an option ROM use the class stored in the device to | Mark Marshall |
2009-11-04 | Fix up typo in Socket 441 CPUs, and add a few (trivial) Kconfig files for them. | Stefan Reinauer |
2009-11-03 | Some fixes. | Patrick Georgi |
2009-11-01 | typo. trivial. Then -> Than. | Zheng Bao |
2009-10-31 | Set SB_HT_CHAIN_ON_BUS0 correctly for arima/hdama. Trivial. | Myles Watson |
2009-10-30 | Fix, um... a typo. | Uwe Hermann |
2009-10-30 | Allow per-northbridge and per-board VGA BIOS file name and PCI ID defaults. | Uwe Hermann |
2009-10-30 | Remove some warnings from the tyan s2895. | Myles Watson |
2009-10-29 | Split a print statement that called dev_path twice, and add a warning comment. | Myles Watson |
2009-10-29 | Add prototypes to silence these warnings. | Myles Watson |
2009-10-28 | Drop remainders of PPC port | Stefan Reinauer |
2009-10-28 | Drop remainder of PPC port | Stefan Reinauer |
2009-10-28 | Fix some builds with Kconfig. | Myles Watson |
2009-10-28 | Make d945gclf build. | Myles Watson |
2009-10-28 | Add some missing license headers, consistency fixes for others (trivial). | Uwe Hermann |
2009-10-28 | Remove all build/ prefixes in the build output. | Uwe Hermann |
2009-10-28 | preliminary Intel D945GCLF Atom+i945 support. | Stefan Reinauer |
2009-10-28 | Create lib.h for homeless prototypes. | Myles Watson |
2009-10-28 | Replace hard coded build with $(obj) paths. | Myles Watson |
2009-10-28 | The check for zero sized resources is already done earlier. So don't redo it | Stefan Reinauer |
2009-10-27 | Prefix all build output file names of files which end up in the build | Uwe Hermann |
2009-10-27 | Improve coreboot build output and eliminate some warnings: | Uwe Hermann |
2009-10-27 | Remove redundant declarations. Trivial. | Myles Watson |
2009-10-27 | Add $(obj) paths for a couple of smm files so they don't end up in the top di... | Myles Watson |
2009-10-27 | Add few missing prototypes, and remove few unused (thus lonelly) variables. | Maciej Pijanka |
2009-10-27 | Update arima/hdama to detect how many nodes there are. Compare to tyan/s2892. | Myles Watson |
2009-10-26 | Various smaller console option fixes as suggested by Peter Stuge: | Uwe Hermann |
2009-10-26 | cp src/mainboard/tyan/Makefile.k8_CAR.inc to src/mainboard/Makefile.k8_ck804.inc | Myles Watson |
2009-10-26 | Move src/mainboard/tyan/Makefile.s289x.inc to src/mainboard/Makefile.k8_CAR.inc. | Myles Watson |
2009-10-26 | Add kconfig menus for most chipset VIDEO_MB values. | Uwe Hermann |
2009-10-26 | Fix iei/pcisa-lx-800-r10. Trivial. | Myles Watson |
2009-10-26 | Remove double include of smm directory. Trivial. | Myles Watson |
2009-10-26 | reasonable output in cbfs loading (part 2) | Stefan Reinauer |
2009-10-26 | reasonable output for cbfs loading.. | Stefan Reinauer |
2009-10-26 | Kontron 986LCD-M update | Stefan Reinauer |
2009-10-26 | CBMEM high table memory manager. | Stefan Reinauer |
2009-10-26 | intel core and core 2: | Stefan Reinauer |
2009-10-26 | Use Intel Core code for eagleheights CAR init, not Intel Core 2, as | Stefan Reinauer |
2009-10-26 | Now that the resource allocator is working nicely we can turn down the debug | Stefan Reinauer |
2009-10-26 | Define some variables that were not defined. There are a couple left. | Myles Watson |
2009-10-24 | Fix intel/xe7501devkit build, missing "uses" clause. | Uwe Hermann |
2009-10-24 | Fix kconfig build error due to "source"ing a non-existant file (trivial). | Uwe Hermann |
2009-10-24 | Major cleanups of the hard_reset() code and config in coreboot. | - supermicro/x6dhe_g/auto.c |
2009-10-24 | Change QEMU CPU Makefile.inc files to match other CPUs. | Uwe Hermann |
2009-10-24 | removal of that unnecessary include slipped through r4841 | Stefan Reinauer |
2009-10-24 | hook up missing x86 SMM into Makefile | Stefan Reinauer |
2009-10-24 | drop support for various (old) PPC CPUs as per discussion from 9/10/9 | Stefan Reinauer |
2009-10-24 | Some ACPI implementations don't like to see full paths within a scope for | Stefan Reinauer |
2009-10-24 | Rework the keyboard driver | Stefan Reinauer |
2009-10-24 | drop src/include/stream/ as the source files from src/stream were dropped a | Stefan Reinauer |
2009-10-24 | * refactor x86 smi handler (put all debug stuff in an extra file smiutil.c) | Stefan Reinauer |
2009-10-24 | Trivial regrouping of a calculation to simplify it. | Myles Watson |
2009-10-24 | A (hypothetical southbridge) component might provide functionality that is not | Stefan Reinauer |
2009-10-24 | re-order console output functions, add proper prototypes, | Stefan Reinauer |
2009-10-24 | Fix USB Debug Device for Intel ICH chipsets | Stefan Reinauer |
2009-10-24 | Fix K8 boards high tables on UMA systems (KT690 for example) | Stefan Reinauer |
2009-10-24 | s/object-y/obj-y/ in two southbridges, since otherwise kbuild will not pick u... | Stefan Reinauer |
2009-10-24 | First attempt to integrate SMM in Kconfig. Unused code so far | Stefan Reinauer |
2009-10-24 | move all register fram definitions to arch/register.h | Stefan Reinauer |
2009-10-23 | Remove left-overs from Winbond southbridge removal (trivial). | Uwe Hermann |
2009-10-23 | Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses before | Myles Watson |
2009-10-23 | New revision guide September 2009 3.46 | Rudolf Marek |
2009-10-23 | drop a lot of dead code, including an old winbond southbridge from our removed | Stefan Reinauer |
2009-10-23 | White space and comment fixes for cache_as_ram.inc files so it's easier to spot | Myles Watson |
2009-10-23 | Remove PRINTK_IN_CAR tests from AMD files. | Myles Watson |
2009-10-23 | VGA BIOS can be added independently of having a payload | Peter Stuge |
2009-10-22 | minimal whitespace fix (trivial) | Stefan Reinauer |
2009-10-22 | trivial: add note that VSA blob belongs into CBFS. | Stefan Reinauer |
2009-10-22 | The LAN chip-set on the Technexion TIM-5690 is enabled by hardware and | Libra Li |
2009-10-21 | Add CONFIG_VGA_ROM_RUN to HP e-Vectra P2706T to make VGA init work. | Uwe Hermann |
2009-10-20 | Add initial support for the HP e-Vectra P2706T. | Uwe Hermann |
2009-10-20 | Minimize differences between newconfig and Kconfig for arima/hdama. | Myles Watson |
2009-10-20 | When I converted an #ifdef to an #if it broke the code because the variable was | Myles Watson |
2009-10-20 | Fix #if CONFIG_VGA==1 -> #if CONFIG_VGA. | Myles Watson |
2009-10-20 | Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should be | Myles Watson |
2009-10-20 | Fix all board names in Kconfig as per wiki / vendor website. | Uwe Hermann |
2009-10-20 | Correct typo. Thanks to Mark Marshall for spotting it. | Myles Watson |
2009-10-19 | Move ITE-specific option to src/superio/ite/Kconfig. | Myles Watson |
2009-10-19 | Add missing SUPERIO_ITE_IT8716F_OVERRIDE_FANCTL kconfig variable. | Uwe Hermann |
2009-10-19 | Fix builds of amd/db800 and digitallogic/msm800sev with smaller bootblocks. | Myles Watson |
2009-10-19 | Unselect AP_CODE_IN_CAR in tyan/s289x. Trivial. | Myles Watson |
2009-10-19 | Clean up some #ifdef CONFIG_* | Myles Watson |
2009-10-18 | Add EXPERT kconfig option so we can hide more advanced options | Uwe Hermann |
2009-10-18 | Drop a duplicated implementation of failover.c. | Uwe Hermann |
2009-10-18 | Simplify Kconfig files by using "select" where possible (trivial). | Uwe Hermann |
2009-10-18 | Drop dead/unused code (trivial). | Uwe Hermann |
2009-10-18 | Remove this, we no longer need it. | Ronald G. Minnich |