| Age | Commit message (Collapse) | Author |
|---|
|
This ensures that SPI is ready when eventlog code is used.
x86 platforms which use eventlog invoke elog_clear() in GSMI and
elog_add_event_raw() when deciding the boot path based on ME status.
For the SMM case spi_init() is called during the finalize stage in
SMM setup. For the boot path case we can call spi_init() at the
beginning of BS_DEV_INIT and it will be ready to use when the boot
path is determined from the ME status.
BUG=none
BRANCH=none
TEST=tested on Link (bd82x6x), Beltino (Lynxpoint), and Rambi
(Baytrail) with follow-up patch
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id3aef0fc7d4df5aaa3c1c2c2383b339430e7a6a1
Original-Reviewed-on: https://chromium-review.googlesource.com/194525
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 173d8f08e867bab8c97a6c733580917f5892a45d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifaed677bbb141377b36bd9910b2b1c3402654aad
Reviewed-on: http://review.coreboot.org/7756
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Set VB_INIT_FLAG_SW_WP_ENABLED according to the status returned by an
optional platform / mainboard function vboot_get_sw_write_protect().
BUG=chrome-os-partner:26777
TEST=Manual on Rambi with all patches in sequence:
`crossystem sw_wpsw_boot` prints 0
`flashrom --wp-enable` and reboot
`crossystem sw_wpsw_boot` prints 1
BRANCH=Rambi
Original-Change-Id: Ifb852d75cc106d10120cfee0a396b0662282051a
Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190096
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c4668fc8a9ab31d9cf876b3d9ad3405756d4d683)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Idace325439958f6b490d2e6705d55e95305c4b2a
Reviewed-on: http://review.coreboot.org/7750
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The call was after the call to vboot_verify_firmware and so would only be
called when falling back to RO, aka recovery mode. This change moves it to
before vboot_verify_firmware so we'll always have the cbmem console.
BUG=None
TEST=Built and booted on nyan and verified that the cbmem console was the same
as the serial output. Built for big and blaze.
BRANCH=nyan
Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196158
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5
Reviewed-on: http://review.coreboot.org/7777
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Panel datasheet defines some delay between PWM signal out and
backlight enable. This change fixes the current sequence
and makes the delays adjustable by dt setting.
BRANCH=none
BUG=chrome-os-partner:28008
TEST=Verified on Big DVT and Nyan/Norrin panels.
Panel works fine with dev mode, and the measurement
of power on sequence meets panel requirements.
Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196183
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3
Reviewed-on: http://review.coreboot.org/7776
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Enable pinmux clamp function to avoid pinmux conflict.
For pins which are configured to tristate enabled, the inputs to the
controller will be clamped to zero. This can be used to avoid pinmux
conflicts since the tristate bit is set to 1 in the power-on-reset
pinmux setting.
With pinmux clamp enabled, we need to configure all the input pins
to tristate disabled.
BUG=chrome-os-partner:27091
BRANCH=None
TEST=built and booted successfully, display worked fine.
Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194060
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0
Reviewed-on: http://review.coreboot.org/7775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This enables event logging support for Nyan platforms.
Right now this doesn't do a whole lot. We can add events in
later CLs.
BUG=none
BRANCH=none
TEST=built and booted for Nyan Rev. 1, eventlog gets initialized
if necessary and can be printed by "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1
Original-Reviewed-on: https://chromium-review.googlesource.com/191200
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7
Reviewed-on: http://review.coreboot.org/7774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This reverts commit 474313d1b6556ad8b3e6750a4096b5735cbfc846.
This reverted commit was applied out of sequence and there are a number
of dependencies that need to be in place prior to adding it. Remove it
for now.
Change-Id: If80c40867098dee2feff2b9a1d824558f4d7028d
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The length modifiers for unsigned char were accidentally changed from
'hh' to 'h' with commit:
* 1c8ee21 edid: Change static variables to auto variables.
Change-Id: I4b3e63cbcde7635b842894f776373f7946bd0df8
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4477
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
SSUS GPIO 5 reflects the Minnowboard Max SKU:
--- GPIO 5 low is a 1GB board
--- GPIO 5 high is a 2GB (or 4GB in the future) board.
This allows us to determine the board type at runtime and configure
the FSP appropriately.
Change-Id: I9f75df5413d23d63280b601457ea9a1ff020d717
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7797
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
- Build gpio.c into romstage
- Add functions to translate the GPIO # to a pad #, then return the
value read from the GPIO.
- Add functions to configure the GPIO - Function, Pull up/down, pull
strength, Input/Output, and Output level.
Change-Id: Ic37dfc9a74a598023bdf797d31087428adec176a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7796
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
|
|
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5a5af71ea49152accd92dc331a19e57f3717e4ff
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7841
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I5d2d4ba098d2a95f7643f000f4b48b3349a8e6cf
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7839
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: Ice5d8ce9408356c866a9a2ee5a03f704f55ddc2a
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7842
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Trivial fixes, but the editor highlights them, and it's easy to go
through a bunch of files while I'm otherwise idle.
Change-Id: I31333742d9c90cf6d7ae3d2f324880ed53807d7f
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7840
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I4f9b2b8375abe4691f279df649eaf822b87509e5
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7731
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I7efc441d3da10e48c8c79e4cd51885bb14eebd55
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7730
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1d000762ed6cc1fa6a274ad6016cf7192eeffea0
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7732
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This change introduces LPAE for virtual address translation. To enable it, set
ARM_LPAE. Boot slows down about 4ms on Tegra124 with LPAE enabled.
TEST=Booted nyan with and without LPAE. Built nyan_big and daisy.
BUG=None
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@google.com>
Original-Change-Id: I74aa729b6fe6d243f57123dc792302359c661cad
Original-Reviewed-on: https://chromium-review.googlesource.com/187862
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 6d8c8b2bbdc70555076081eb3bfaabde7b4a398f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8980375c14758af35f7d5ec5244be963e5462d8a
Reviewed-on: http://review.coreboot.org/7749
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This consolidates all calls to spi_claim_bus() and spi_release_bus()
to a single location where spi_xfer() is called. This avoids confusing
(and potentially redundant) calls that were being done throughout the
generic spi_flash.c functions and chip-specific functions.
I don't think the current approach could even work since many chip
drivers assert /CS once and then issue multiple commands such as page
program followed by reading the status register. I suspect the reason
we didn't notice it on x86 is because the ICH/PCH handled each
individual command correctly (spi_claim_bus() and spi_release_bus()
are noops) in spite of the broken code.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I3257e2f6a2820834f4c9018069f90fcf2bab05f6
Original-Reviewed-on: https://chromium-review.googlesource.com/194510
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit d3394d34fb49e9e252f67371674d5b3aa220bc9e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieb62309b18090d8f974f91a6e448af3d65dd3d1d
Reviewed-on: http://review.coreboot.org/7829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a wrapper function and a Kconfig variable to differentiate
between SPI controllers which use atomic cycle sequencing versus
those where the transaction sequence is controlled manually. Currently
this boils down to x86 vs. non-x86.
Yes, it's hideous. The current API only worked because, for better or
worse, x86 platforms have been homogeneous in this regard since they
started using SPI as an alternative to FWH for boot flash. Now that
we have non-x86 platforms which use general purpose SPI controllers,
we should overhaul the entire SPI infrastructure to be more adaptable.
BUG=none
BRANCH=none
TEST=tested on nyan and link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: If8ccc9400a9d04772a195941a42bc82d5ecc1958
Original-Reviewed-on: https://chromium-review.googlesource.com/195283
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4170c59d06206667755402712083452da9fcd941)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I54e2d3d9f9a0153a56f7a51b80f6ee6d997ad358
Reviewed-on: http://review.coreboot.org/7828
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In last clean-up commit, the detailed_blocks parsing has been merged to one
for-loop and combining return values in each iteration instead of assignment.
As a result, has_valid_detailed_blocks should now be initialized as 1.
BRANCH=none
BUG=none
TEST=Tested AUO 1080p and InnoLux 720p panels on nyan_big
Original-Change-Id: Ie4b6e25de63c0e216ae5de9bde20eed1fe3e59a6
Original-Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195803
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 21ac533d17c892c39532c263cc6ec15e4507ed3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I23111efb902c7e5994a4dbdfe77242c13ef5a70e
Reviewed-on: http://review.coreboot.org/7835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To support parsing multiple EDID blobs, the static "decode results" flags should
be changed to auto variables inside decode_edid.
This is done by packaging static variables into a structure inside decode_edid.
We also revised some functions (manufacturer_name, do_checksum) to avoid
accessing global variables directly. Extension (and detail block) parsing may
need to access and return all parsed context so we pass the whole structure to
it.
BRANCH=none
BUG=none
TEST=emerge-nyan coreboot chromeos-bootimage
# See EDID parsed correctly on Nyan.
Original-Change-Id: Ieca93d446bacf655c145dffdfa6cc6f5dc87ac26
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/195372
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ed45909df24c05a0cb8b2ff662fdd2d7a39012f0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I17cdfa770181a6eaac9d1050d340c8e052572b4a
Reviewed-on: http://review.coreboot.org/7834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I6a0f5406fb3bc3e8aa3a1111b1d702f530c9329b
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7733
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Use the RTC driver interface to find the timestamp for events instead of
reading the CMOS based RTC directly on x86 or punting on ARM. This makes
timestamps available on both architectures, assuming an RTC driver is
available.
BUG=None
TEST=Built and booted on nyan_big and link and verified that the timestamps
in the event log were accurate.
BRANCH=nyan
Original-Change-Id: Id45da53bc7ddfac8dd0978e7f2a3b8bc2c7ea753
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197798
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 493b05e06dd461532c9366fb09025efb3568a975)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8481adde86d836b5f0b019c815bada6d232a4186
Reviewed-on: http://review.coreboot.org/7833
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This attempts to isolate/fix some x86-isms:
- Translate flash offset to memory-mapped address only on x86.
- Guard ACPI-dependent line of code
- Use a Kconfig variable for SPI bus when probing the flash rather
than assuming the bus is always on bus 0.
- Zero-out timestamp on non-x86 until we have a better abstraction.
(note: this is based off of some of Gabe's earlier work)
BUG=none
BRANCH=none
TEST=needs testing
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I887576d8bcabe374d8684aa5588f738b36170ef7
Original-Reviewed-on: https://chromium-review.googlesource.com/191203
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1fc7a75f8c072098e017104788418aeed0705e93)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida4b211cf21ecdde9745d4dbef6a63ffb9fbba8d
Reviewed-on: http://review.coreboot.org/7832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This severs a dependency the eventlog code has on initializing
chipset/SoC SPI controller. Currently elog_init() calls spi_init()
as a catch-all. This worked for x86 since the SPI controller is only
used for one thing on existing platforms. As we add eventlogging
support to non-x86 platforms we need to consider the more generalized
case where the assumptions about how SPI works on x86 are no longer
valid.
BUG=none
BRANCH=none
Signed-off-by: David Hendricks <dhendrix@chromium.org>
TEST=built and booted on Link, Beltino and Rambi. See below for
"mosys eventlog list" output on Link showing boot and suspend/resume
events (including lid close/open) added successfully.
localhost ~ # mosys eventlog list
0 | 2014-04-14 13:52:44 | Log area cleared | 4096
1 | 2014-04-14 13:52:44 | System boot | 50
2 | 2014-04-14 13:52:44 | EC Event | Power Button
3 | 2014-04-14 13:52:44 | SUS Power Fail
4 | 2014-04-14 13:52:44 | System Reset
5 | 2014-04-14 13:52:44 | ACPI Wake | S5
6 | 2014-04-14 13:53:25 | ACPI Enter | S3
7 | 2014-04-14 13:53:35 | ACPI Wake | S3
8 | 2014-04-14 13:53:35 | Wake Source | RTC Alarm | 0
9 | 2014-04-14 13:53:49 | ACPI Enter | S3
10 | 2014-04-14 13:54:00 | EC Event | Lid Open
11 | 2014-04-14 13:54:00 | ACPI Wake | S3
12 | 2014-04-14 13:54:00 | Wake Source | GPIO | 15
Original-Change-Id: I26e25c0a856f7b8db5ab6b8e7e1acae291d2eadc
Original-Reviewed-on: https://chromium-review.googlesource.com/194526
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 2971d20b6ebdd9803b05ccbbaeefe1bde1a21af4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia5f2913fd8e4fee6e741e6d1e39d32bb86525cb3
Reviewed-on: http://review.coreboot.org/7831
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The current algo sets dc shift clock divider to 5 and PLLD DIVP
to 0, this is causing VCO out of the characterized range for some
panels.
This CL changes the dc shift clock divider to 1 and calculates a
proper DIVP to have the VCO inside the characterized range, i.e.,
500MHz ~ 1000MHz.
BRANCH=none
BUG=none
TEST=Verify on below panels the pixel clock frequencies are correct.
1. AUO B133XTN01.3 (69.5 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 69.5 695 12/695/0
with: 69.5 139 3/139/2
2. AUO B140HTT01.0 (141 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: VCO (1410000000) out of range. Cannot support.
with: 141 282 2/94/1
3. LG LP140WH8 (76.32 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 76.32 763.2 5/381/0
with: 76.3125 152.625 8/407/2
4. N116BGE-EA2 (76.42 MHz)
pixelclk(MHz), pll_d(MHz), m/n/p
without: 76.40 764 3/191/0
with: 76.375 152.75 12/611/2
Original-Change-Id: Id4b3a4865acde37a97d7346ec88406f5237304eb
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195534
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 1b56566786aa86c14f691fa3858b878f27b6b4de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia9de93420e60323f143a42db842febdd3706fe44
Reviewed-on: http://review.coreboot.org/7773
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Similar to the W25Q64DW, the W25Q32DW has basically the same
attributes as the earlier W25Q32 parts but with a different
value in the MSB of the ID.
BUG=none
BRANCH=none
TEST=tested on nyan, now SPI flash commands actually work.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I697768a443c98515d893f9cf8f8b4258ae0f159d
Original-Reviewed-on: https://chromium-review.googlesource.com/191205
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 35f03f4f4f21c470d172ce7cce257517b959346d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I73606737835e4f8ea00d2c331ca37957e4abd953
Reviewed-on: http://review.coreboot.org/7755
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The old print simply said "Got idcode". This makes it actually
display what it got.
BUG=none
BRANCH=none
TEST=tested on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8f1c8fde6e4ac00b12e74f925b7bcff83d1f69f3
Original-Reviewed-on: https://chromium-review.googlesource.com/191204
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 5f13789be77d038d3c1602037afe29a0351f72ee)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I65d0d51c17b3bda62351532aac1756b630433ea3
Reviewed-on: http://review.coreboot.org/7754
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
hynix-2GB-204MHz/hynix-4GB-204MHz are not workable with Samsung RAMCODE.
To replace them by samsung-2GB-204/samsung-4GB-204 for bring up purpose.
BRANCH=none
BUG=chrome-os-partner:27682
TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and
boot to kernel successfully with all the RAMCODE
Original-Change-Id: I7c2a96e84e6988dd739a9621ff93edc01703306a
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/195396
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
(cherry picked from commit dc028c408be58f036fe125abc2e49e2c0cde0aa8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ieeb0250e42fb48c6089bc8dc95550c9b1694d7f8
Reviewed-on: http://review.coreboot.org/7772
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The pixel clock for some panel (ex: CMN N116BGE-EA2: 76420000) cannot be matched
by our PLLD params finding algorithm, after VCO/CF limitations are applied.
To support these panels, we want to allow "best matched" params.
BRANCH=nyan
BUG=none
TEST=emerge-nyan_big coreboot chromeos-bootimage;
emerge-nyan coreboot chromeos-bootimage;
# Successfully brings up display on Nyan_Big EVT2 and Nyan Norrin.
Original-Change-Id: If8143c2062abd2f843c07698ea55cab47bf1e41a
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/195327
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 8aa66e659e3c60296f05e59b4343496a850ea019)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I623db44de35fecee5539e4d72f93f28b5fa0b59c
Reviewed-on: http://review.coreboot.org/7771
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
We found that without enabling DC in tegra_dc_sor_enable_dc, kernel would have
problem showing the text console before graphics interface is initialized, for
example "chromeos factory install shim (text only)" or the "splash screen".
BRANCH=none
BUG=chrome-os-partner:28082
TEST=emerge-nyan coreboot chromeos-bootimage
Boots factory install shim and see text console.
Original-Change-Id: I6fce963ceddd125dd52789d2ec843cc2ee05f1f5
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/195388
(cherry picked from commit 375a86be9b23650cd96e46b07c7a0b5c10970797)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib75e3ffac9b216c7486845cb8459dd8952d51fe6
Reviewed-on: http://review.coreboot.org/7770
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Dump all SOR registers for debug purpose. By default, this function
is not being built in.
BRANCH=none
BUG=chrome-os-partner:27413
TEST=build nyan and nyan_big.
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I7f44709b8572b9eac33c2193b92a65bf2b22aa76
Original-Reviewed-on: https://chromium-review.googlesource.com/194738
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Commit-Queue: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit d08c0f7c5e8ac094987b09fae96e8133ed9c08c5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1341bbbd0ea6277e5a1b286d6f088f2961070416
Reviewed-on: http://review.coreboot.org/7769
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch adds some documentation to the additional PLL divisor
constraints on the intermediary VCO and CF values that we just found out
about. PLLC divisors for some oscillators had to be adjusted
accordingly.
It also adds a new clock_get_pll_input_khz() function to replace
clock_get_osc_khz() in cases where you want to factor in the built-in
predivider for 38.4 and 48 MHz oscillators.
BUG=None
TEST=Still boots.
Original-Change-Id: Ib6e026dbab9fcc50d6d81a884774ad07c7b0dbc3
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/194474
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 3f1f565baf100edcd486055e4317c675c882396f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I091f42bf952a4b58ef2c30586baa5bf7496fa599
Reviewed-on: http://review.coreboot.org/7768
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This register needs to be set properly during display init.
BRANCH=none
BUG=chrome-os-partner:27413
TEST=build nyan and nyan_big. nyan display works fine.
nyan_big display works as well. However, the mode setting
needs to be based on either devicetree or EDID.
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I93c69d8042a3f3c19f4e24801423b73246e37031
Original-Reviewed-on: https://chromium-review.googlesource.com/194739
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit ee9a3c472c5621edebefcc8882582c6fc01255e2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie642a008eaf6c4ab68ede1dde98ff4268f51fc9c
Reviewed-on: http://review.coreboot.org/7767
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
BRANCH=none
BUG=chrome-os-partner:27413
TEST=build nyan and nyan_big. nyan display works fine.
nyan_big display still does't work until all related
patches are built in. (CL:194739)
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ic5d977f695be127693f1ecc3ba52d478f524d20f
Original-Reviewed-on: https://chromium-review.googlesource.com/194737
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit ef3208d8ff3c3dcfaeda9c0146bf1ae920682dea)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ide1cd28ecc0ae1cd4d8603a52975592daee4bce8
Reviewed-on: http://review.coreboot.org/7766
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Correct SOR attaching sequence.
https://chromium-review.googlesource.com/190300
BRANCH=none
BUG=chrome-os-partner:27413
TEST=build nyan and nyan_big. nyan display works fine.
nyan_big display still doesn't work until all related
patches are built in. (CL:194737 and CL:194739)
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: I8aaf65db90e5e45bd9097c9d38b231bd7d41d997
Original-Reviewed-on: https://chromium-review.googlesource.com/194403
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit fea9d288b98dcc6fc32dc93212fa7c4185603646)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6646816809e29c63de65caa7e7146cd3d02902cf
Reviewed-on: http://review.coreboot.org/7765
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Tegra124 family products may want to use many different display panels with
various timing settings. To support them, we should initialize display panel by
EDID instead of hard-coded values.
BUG=none
TEST=emerge-nyan coreboot chromeos-bootimage
BRANCH=none
Original-Change-Id: Ib125a7f9cb1e6c8cf2d79e0baab525acfd1b7a6e
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/192730
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 43ecd473419aa0fbdd22487416b0b6cfea6a20d1)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6af47db113035e9440e663a769318776c7b6b70b
Reviewed-on: http://review.coreboot.org/7764
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
First, we don't want floats in our code base.
Second, the calculation of the aspect ratio was wacky,
using a value guaranteed to be 0 for aspect ratio calculation.
While at it, define the aspect_* fields to be in tenths, to
provide some additional resolution. They were like that already
but we now also commit to that.
Change-Id: I5511adf4bf76cdd6a69240491372f220ef1aa687
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/7803
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins)
|
|
There is no Cache As Ram for these boards, let's get rid of them.
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Change-Id: Ia70befc59708c360ad02ed7e3a49d3b0f95dc707
Reviewed-on: http://review.coreboot.org/7119
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Drop two SuperIOs that were only used by GX1 systems, and are not used anymore.
* winbond/w83977f
* nsc/pc87351
Change-Id: I8a8eacb0f862b5d08ccfd87f8db503b0ab3c5700
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7118
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
There is no Cache As Ram for these boards, let's get rid of them.
Change-Id: Ib41f8cd64fc9a440838aea86076d6514aacb301c
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7117
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
There is no need to call cbmemc_reinit() exclusively in romstage,
that is done as part of the CAR migration of cbmem_recovery().
CBMEM console for romstage remains disabled for boards flagged with
BROKEN_CAR_MIGRATE, but with this change it is possible to have it for
ramstage.
Change-Id: I48c4afcd847d0d5f8864d23c0786935341e3f752
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7592
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Flag the boards with BROKEN_CAR_MIGRATE, as testing for EARLY_CBMEM_INIT
is not enough to disable CBMEM console for romstage on these platforms.
To have CBMEM early in ramstage, define get_top_of_ram() on sandy/ivy.
Change-Id: Ieefc12099a0e043eb1a7e14bdc7c6e3d209b3d8f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7468
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
As is the case in commit:
3312ed7 amd/agesa/f1?/Lib/amdlib.c: Integer overflow in loop construct
The semantics of this loop relies on an integer overflow in Index >=0
that implies a return value of (UINT8)-1 which around wraps to 0xFF, or
VOLT_UNSUPPORTED.
Also fix an infinite loop.
Change-Id: Iced3eff3ae7b8935db3bdd6147372cf3b540883c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7676
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
It appears the decimal value was used instead of the hexadecimal value.
Apply commit 59919ad1 (southbridge/amd/agesa/hudson: Correct incorrect
#define) to AMD Avalon, whose `pci_devs.h` was copied from AMD Hudson.
The incorrect define was introduced in commit 2093c4f7 (AMD/agesa: Add
functions for AMD PCI IRQ routing).
Change-Id: I7ccc060e8fa032080375259c3b11d39e2deb8e9e
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/7800
Tested-by: build bot (Jenkins)
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
The new API is in use in depthcharge and is based around the "i2c_transfer"
function instead of i2c_read and i2c_write. The new function takes an array of
i2c_seg structures which represent each portion of the transfer after a start
bit and before the stop bit. If there's more than one segment, they're
seperated by repeated starts.
Some wrapper functions have also been added which make certain common
operations easy. These include reading or writing a byte from a register or
reading or writing a blob of raw data. The i2c device drivers generally use
these wrappers but can call the i2c_transfer function directly if the need
something different.
The tegra i2c driver was very similar to the one in depthcharge and was simple
to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and
replace the ones in coreboot. The Exynos 5420 driver was ported from the high
speed portion of the one in coreboot and was straightforward to port back. The
low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot
and were replaced with the depthcharge implementation.
BUG=None
TEST=Built and booted on nyan with and without EFS. Built and booted on, pit
and daisy.
BRANCH=None
Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193561
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe)
This cherry-pick required additional changes to the following:
src/cpu/allwinner/a10/twi.c
src/drivers/xpowers/axp209/axp209.c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7
Reviewed-on: http://review.coreboot.org/7751
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BOOT_MEDIA_SPI_BUS is a Kconfig variable used on some ARM-based
platforms to set up CBFS media. It turns out it can also be helpful
for setting up the eventlog which is intended to reside on the same
SPI flash as CBFS. Setting it for x86 will allow us to remove an
assumption about which SPI bus is used for this flash device.
Long term this can go away as we come up with a better abstraction
for the eventlog's backing store. This is only intended to help us
get from here to there.
BUG=none
BRANCH=none
TEST=built and booted on Link
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I1d84dc28592fbece33a70167be59e83bca9cd7bc
Original-Reviewed-on: https://chromium-review.googlesource.com/191202
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 200aa7c5b1b1f4c74412893cf7231a12e2702463)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If988bcff5244ec6a82580203471b25fac49c45ef
Reviewed-on: http://review.coreboot.org/7752
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This replaces a hard-coded bus number of 0 with a Kconfig variable,
CONFIG_BOOT_MEDIA_SPI_BUS. This removes an assumption made for x86
where this value is always 0 and makes it easy to add support for
other platforms where the bus number for the backing SPI flash is
more arbitrary.
BUG=none
BRANCH=none
TEST=tested on Nyan (bus=4) and Link (bus=0)
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I1e878a1628af7f4ccc2f39a70b2190192767e536
Original-Reviewed-on: https://chromium-review.googlesource.com/194854
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 371c6c14d8d4b98004eebce7049a88a219682bc4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie105b4654e028098f2137c96e4309b8d85f096df
Reviewed-on: http://review.coreboot.org/7753
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This symbol is set using a config variable which can be set to something
appropriate by the SOC. If it isn't, the symbol is set to 0 which should be
caught by checks in the cbmem console itself.
BUG=None
TEST=Built for nyan with a cbmem buffer location set. Built for peach_pit
without a location set.
BRANCH=None
Original-Change-Id: I92cd65bb6767a67637faf1dd3cdbe03e433724a9
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193165
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4f38c073bfe469a753e168391787fdd7bc5c34d9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I979037fe8cda885cc516d79f3151ca1fc77adca3
Reviewed-on: http://review.coreboot.org/7746
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Turns out that when you clear 28 bits starting with bit 3, you leave bit
31 standing. Ooops...
This shouldn't really matter since that bit is reserved/SBZ in CLIDR
anyway, but it's still nice to fix it. This whole thing should really be
an AND for clarity anyway in my opinion.
Bug found in upstream NetBSD (who would've thought...).
BUG=None
TEST=Still boots.
Change-Id: Ic826e82d58fd1ce984971afea3dfa9296f746d9f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/193300
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d270c0ec18b74b272451c456cbf07e99d95896cb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7745
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In order to build rmodules for armv7 boards, the default
compiler options need to be set so the assembler sources
can correclty compile. For now assume rmodules for arm
devices use the ramstage compiler options.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built vboot as rmodule for nyan.
Original-Change-Id: I8d12a2a57944b187cbdff2f22176de5b4de87a54
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190926
(cherry picked from commit cd091ae8ced30e6e2543f36bdb5c14518e7879c3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I24706f7d72a53f71abd2770f0d12de8c6ed31f63
Reviewed-on: http://review.coreboot.org/7744
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
According to DP version 1.2a, The MOT (Middle-of-Transaction) bit
must be set when the I2C transaction does not stop with the current
AUX transaction.
Thus the correct steps for an I2C read shall be:
1. I2C command write with MOT set to 1
2. I2C command read to the same address with MOT set to 0
BUG=chrome-os-partner:27679
TEST=EDID data read from LP140WH8 panel is correct while it's a
repeated pattern of the first 16 bytes without this CL
BRANCH=none
Original-Change-Id: I0526beffb8852fbbe0eb5bb80e370261617a59b8
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194915
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 466ab0e00744f79ae3720474140d95e5f0828de9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ic8ad38b4b08989dd7178d59151e1e276b8a58439
Reviewed-on: http://review.coreboot.org/7763
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
PLLD, the clock for display, was previously hard-coded to 306MHz. To support
more different panels, we should calcualte PLLD by panel pixel clock
configuration.
Note existing pixel clock configurations for nyan* boards won't work (they used
to rely on hard-coded approximated values) so the device trees are also
modified.
BRANCH=none
BUG=chrome-os-partner:25933
TEST=emerge-nyan_big coreboot chromeos-bootimage
See panel correctly initialized and got DEV screen.
Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193565
(cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916
Reviewed-on: http://review.coreboot.org/7762
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds a missing dma_release() at the end of DMA transfers. It
probably doesn't matter since we don't do many DMA transfers, though
I wouldn't want to hit some corner case with EFS and eventlog.
BUG=none
BRANCH=none
TEST=tested on nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I79b30455babe75a13aac827caac88bf7053ec9e4
Original-Reviewed-on: https://chromium-review.googlesource.com/194479
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit dc7dc1d25bd88873b4c1198a6f3723d27c914ddc)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8c5da4e104328fd8bce71942e6eda458a37bfe06
Reviewed-on: http://review.coreboot.org/7761
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It worked earlier since the APB and AHB bus widths occupy the same bits
in their respective registers.
BUG=none
BRANCH=none
TEST=tested on Nyan
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I9b18c648c60dcc4ad62ca1f514d253f8cccaeee7
Original-Reviewed-on: https://chromium-review.googlesource.com/194478
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 1d912302e9dcc9c6ba69e15434bb1841e1196208)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2ea7ac83d3501876df52018aed467ec33074817e
Reviewed-on: http://review.coreboot.org/7760
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO.
Even though no problems were caused by this, correct it here
so we get a conflict-free pinmux map.
BUG=chrome-os-partner:27091
BRANCH=none
TEST=Built and booted on Nyan, ran TegraShell "pinmux check"
and saw no conflicts.
Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194582
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c
Reviewed-on: http://review.coreboot.org/7759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
href_to_sync and vref_to_sync are chip specific settings. Currently
they are set to 1/2 of hfront_porch and vfront_porch respectively.
However, to support EDID (CL192730), per David Ung, the safe
values for both are 1 (the same settings as in kernel).
BUG=none
BRANCH=none
TEST=built and booted on nyan.
Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193504
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79
Reviewed-on: http://review.coreboot.org/7758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change takes about 8K of space away from the cbfs cache and repurposes
it for the cbmem console buffer. This is a little more than twice the space
we currently need for the bootblock and ROM stage to give us some room to grow
and for extra debug output if needed.
BUG=None
TEST=Built and booted on nyan. Checked the cbmem output.
BRANCH=None
Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193169
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab
Reviewed-on: http://review.coreboot.org/7757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Set the appropriate config options and make the appropriate calls
to perform vboot verification. The flashmap offset as well as the TPM
information needs to be properly set. Lastly, call into
vboot_verify_firmware() to perform the vboot verification when it is
enabled.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built vboot verification on nyan.
Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/190928
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5
Reviewed-on: http://review.coreboot.org/7743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
RAM module for RAMCODE 0010 (K4B4G1646Q) does not work with
hynix-2GB-204MHz configuration. We need to replace it by
hynix-2GB-792MHz. Also updated hynix-2GB-792MHz configuration
from Nyan board folder. This commit is only for bring up stage.
Once finish dram stress test, will update it again.
BRANCH=none
BUG=chrome-os-partner:27682
TEST=emerge-nyan_blaze coreboot builds OK; flash to blaze board and
boot to kernel successfully
Original-Change-Id: Idfc503c944ac6120c92a4cf329f3fbe63b2c2a1c
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193737
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 91f21aa0cf9251b825e42d946d8cd41849c57447)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6293fa638c5b2577e502ba34a3cc6e6d5b7f2fdb
Reviewed-on: http://review.coreboot.org/7742
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are some unexpected symbol at the end of each line in the
generated .inc file when the config file is in DOS format (CR+LF).
Modify cfg2inc to support DOS format cfg file by removing carriage return symbols from the end of each line.
BUG=chrome-os-partner:27614
TEST=sudo cfg2inc.sh XXX.cfg # make a expected inc file
BRANCH=nyan
Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Change-Id: I68b0f4b3805fcb5a6b633653c95afbafcb880a93
Original-Reviewed-on: https://chromium-review.googlesource.com/192697
Original-Tested-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Neil Chen <neilc@nvidia.com>
(cherry picked from commit 38e90ab0d9110d3ede39c70e27961b833813a7d4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I30737600fa8ac12a45ad0fbc6086a624993794e7
Reviewed-on: http://review.coreboot.org/7741
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
For some UART hardware registers are 32 bits wide, so we will need
base_port + reg << 2 instead. Prepare for that change and unification of
MMIO between ARM and x86.
Change-Id: I5fa2c2f7ee4872499a01754c1ba872a8addf499c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7793
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
To set the 8 different BCT as hynix-2GB-204 first. Once the
corresponding BCT release from AE, change it.
BRANCH=none
BUG=None
TEST=emerge-nyan_blaze coreboot builds OK
Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Change-Id: Ia42a4a5b85c561421ab8ae9aaf21c46a3c0a3513
Original-Reviewed-on: https://chromium-review.googlesource.com/191682
Original-Tested-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-by: Artiste Hsu <chhsu@nvidia.com>
Original-Reviewed-by: Katie Roberts-Hoffman <katierh@chromium.org>
Original-Commit-Queue: Neil Chen <neilc@nvidia.com>
(cherry picked from commit 27792db4a90ae00e066bb0b88968cf5f187edb1d)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia648c8bdbbbc82bbc8508bead6ab24d8d0aa3fb2
Reviewed-on: http://review.coreboot.org/7740
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher.
To avoid it not being able to keep up, we reduce the frequency of that bus on
all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we
switch the clock source to CLKM.
BUG=chrome-os-partner:22849
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193349
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7
Reviewed-on: http://review.coreboot.org/7739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Consolidate the register setting clrsetbits_le32 call to simplify the macros.
Add a check for bits of the divisor being dropped. The clock source registers
will throw away bits that aren't supported, so we can check for divisor
overflow by checking for dropped bits.
BUG=None
TEST=Purposefully tried to set a clock to a rate which overflows its divisor.
Verified that the check triggered. Booted on nyan. Verified the TPM i2c bus
frequency was still correct.
BRANCH=None
Original-Change-Id: I3b1b6ba57f6b7729f303d15a16b685a48751d41f
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193348
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9cd79dd974d8a3c31398f8fbd62750b194867891)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id4d8ecfeff52737cdd68999028b37cbdedb0d116
Reviewed-on: http://review.coreboot.org/7738
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To ensure that the command1 write which sets the "go" bit completes before
other reads to the device. Otherwise, there's a race condition where those
register values might still have their values from the last transfer. With
different SPI clock frequencies, that could lead to spi_delay being told there
were negative bytes still to send. Its expected delay would wrap to a negative
value, that was passed to udelay, and the system would sit there for 4 seconds
not doing anything.
BUG=None
TEST=Built and booted on nyan. Set the SPI bus frequency to a value which was
causing the 4+ second delay and verified that it no longer happened.
BRANCH=None
Original-Change-Id: I8b4090efc69f34d0413e3f63c59c1825dd151cec
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193347
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d7ea9febdf2c5942f81607ee6ded786c9a8954bb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I095bfc745eda37b8e666475ceb41684152f3709a
Reviewed-on: http://review.coreboot.org/7737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This fixes two problems with the clock configuration on tegra124. First, the
macro which set up the i2c clocks tried to account for the fact that the i2c
divisor's lsb represents 1.0 where it normally represents 0.5 by multiplying
the target frequency by 2. That doesn't work, unfortunately, because the
divisor is actually n + 1, and what n + 1 means depends on where the one's
place is in the divisor.
Also, when calculating the divisor, the standard C division operator uses
truncation to deal any remainder which tends to make the divisor smaller. That
has the effect of making the output frequency higher than what was requested.
Since it's usually safer to undershoot a frequency than overshoot it, this
change makes those divisions round up instead.
Finally, the hand tuned temporary UART clock configuration was adjusted so
that it still ends up with the same divisor. Without that, very early output
from the bootblock is garbled, specifically the coreboot welcome banner,
build timestamp, etc.
BUG=chrome-os-partner:27220
TEST=Built and booted on nyan. Used a logic analyzer to verify that the TPM
i2c bus ran at 400KHz instead of 660KHz, and that the divisor was the expected
value. Measured boot time with and without EFS and verified that there was no
change. Spot checked the output for errors and verified that none of the
bootblock output was garbled.
BRANCH=None
Had to add the stdlib.h from 89ed6c that hadn't been merged correctly.
Original-Change-Id: I7e948c361ed4bf58c608627d32f2e3424faea1fb
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193362
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 164f7010a47d3bbdbc8bb572106140ae186f3807)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I317b66eda929c0e5a5832adca267b8b54c6aae34
Reviewed-on: http://review.coreboot.org/7736
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To read EDID, we need to access I2C via DP AUX channel.
BRANCH=none
BUG=chrome-os-partner:25933
TEST=emerge-nyan coreboot chromeos-bootimage
Original-Change-Id: I2666b5d46843485b79265a537f19bd8eab5e1a26
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/188858
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8f8e98ff5038b57f89332aee75573095c3933dd2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5b1b6ab2940c8265483059fd94a2c4db2a41144a
Reviewed-on: http://review.coreboot.org/7735
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If EFS is enabled and vboot didn't tell us it's going to use the display, we
can skip initializing it and save some boot time.
BUG=chrome-os-partner:27094
TEST=Built and booted on nyan without EFS in recovery mode and normal mode.
Built and booted on nyan with EFS in recovery mode and normal mode. Verified
that in normal mode with EFS the display initialization was skipped and boot
time was essentially the same as when display initialization was simply
commented out.
BRANCH=None
Original-Change-Id: I1e2842b57a38061f40514407c8fab1e38b75be80
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/192544
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a672d18c3570e6991a1c1c0089697112a4cd71d0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I95e8bd7a447876174305f755cc632365ed6f5a30
Reviewed-on: http://review.coreboot.org/7734
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
It appears the decimal value was used instead of the hex value.
Change-Id: I04acde9e5b2a9e08ed01b0564c3d561b0385a392
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7799
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
For some of the boards using AMD processors, the Agesa Makefile.inc
is processed twice, causing the list of obj files passed to the ar
command to be added twice. This does not break the build, but does
make the ar command line unnecessarily long.
Change-Id: I02a7e6fc617e337ca2e2dceeff3d4db9995bfe16
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7787
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
powernow_acpi.c array TDP has 20 entries, yet the loop that reads it
processes 21 entries. This causes a gcc 4.9.2 build failure. Limit
processing to 20 entries.
Change-Id: Ice173b276293184386cd8943a3213f3154f86458
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/7791
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Remove '__attribute__((optimize("Os")))' as it is unlikely to be
necessary as it is not used in other families that have the same
code and only hides deeper issues.
Change-Id: Ica890812ebc2fb659b9c3e46b40cf3f6534b3cf2
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/7689
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The updated KaveriPI binary, upgrading to v1.1.0.7, requires changes
to define the PSP device (PCI 0:08.0) and the IOMMU device (PCI 0:00.2).
In the new AGESA binary, the IOMMU device is enabled and must be
disabled in devicetree.cb and agesawrapper_amdinitenv() to maintain
the same level of functionality.
Change-Id: I3f47e0bd5a75729ec1e4b7b11885d0622c474342
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/7727
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Clang complains:
"implicit truncation from 'int' to bitfield changes value from -1 to 15"
-1 is define in 'c11std 6.3.1.3p2' as:
[Signed and unsigned integers] Otherwise, if the new type is unsigned,
the value is converted by repeatedly adding or subtracting one
more than the maximum value that can be represented in the new type
until the value is in the range of the new type.60)
FOOTNOTE.60 The rules describe arithmetic on the mathem...
This is "0xFF" on Mullins and "0xF" in this case. Clang seems to
complain about this two's complement in a bitfield as being truncated.
As the bitfield is 4 bits wide, (a maximum of 15 decimal), we set the
field as '0x0F'. Ideally this field /should/ be set to 'UINT8_MAX' however
we still have silly truncation warnings.
Change-Id: Ib7476d453ffd932bb911e638117cf9f56f71f269
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7719
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Clang complains that a signed shift result (0x210000000)
requires 35 bits to represent, but 'int' only has 32 bits.
However, we write the high bits separately and so this is
a spurious warning.
Change-Id: I3e1c57334077feb50004d7b39abff4bd84ca095b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7673
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
They were only used internal to the SPI drivers and, according to the comment
next to their prototypes, were for when the SPI controller doesn't control the
chip select line directly and needs some help.
BUG=None
TEST=Built for link, falco, and rambi. Built and booted on peach_pit and nyan.
BRANCH=None
Original-Change-Id: If4622819a4437490797d305786e2436e2e70c42b
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/192048
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1e2deecd9d8c6fd690c54f24e902cc7d2bab0521)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ida08cbc2be5ad09b929ca16e483c36c49ac12627
Reviewed-on: http://review.coreboot.org/7708
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
spi_set_speed was never implemented, and spi_cs_is_valid was only implemented
as a stub and never called.
BUG=None
TEST=Built for rambi, falco, and peach_pit.
BRANCH=None
Original-Change-Id: If30c2339f5e0360a5099eb540fab73fb23582905
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/192045
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 98c1f6014c512e75e989df36b48622a7b56d0582)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iebdb2704ee81aee432c83ab182246d31ef52a6b6
Reviewed-on: http://review.coreboot.org/7707
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
The SPI drivers for tegra and exynos5420 have code in them which waits for a
frame header and leaves filler data out. The SPI driver shouldn't have support
for frame headers directly. If a device uses them, it should support them
itself. That makes the SPI drivers simpler and easier to write.
When moving the frame handling logic into the EC support code, EC communication
continued to work on tegra but no longer worked on exynos5420. That suggested
the SPI driver on the 5420 wasn't working correctly, so I replaced that with
the implementation in depthcharge. Unfortunately that implementation doesn't
support waiting for a frame header for the EC, so these changes are combined
into one.
BUG=None
TEST=Built and booted on pit. Built and booted on nyan. In both cases,
verified that there were no error messages from the SPI drivers or the EC
code.
BRANCH=None
Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191192
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id8824523abc7afcbc214845901628833e135d142
Reviewed-on: http://review.coreboot.org/7706
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Depending on the platform the underlying regions vboot requires
may not be accessible through a memory-mapped interface. Allow
for non-memory-mapped regions by providing a region request
abstraction. There is then only a few touch points in the code to
provide compile-time decision making no how to obtain a region.
For the vblocks a temporary area is allocated from cbmem. They
are then read from the SPI into the temporarily buffer.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built and booted a rambi with vboot verification.
Original-Change-Id: I828a7c36387a8eb573c5a0dd020fe9abad03d902
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/190924
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit aee0280bbfe110eae88aa297b433c1038c6fe8a3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia020d1eebad753da950342656cd11b84e9a85376
Reviewed-on: http://review.coreboot.org/7709
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The arm architecture currently exports cache_sync_instructions()
in <arch/cache.h>. In order for rmodule loading to work on arm
architectures the cache_sync_instructions() needs to be called to
sequence the instruction cache. To avoid sprinkling #ifdefs around
just add an empty cache_sync_instructions() definition.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built and booted nyan and rambi.
Original-Change-Id: I1a969757fffe0ca92754a0d953ba3630810556e3
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/191551
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit fda20947b928ee761d5ed15e414636af419970a6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3e8ca12e1d82ccedf1ff9851ae3c5c80cda2dd5f
Reviewed-on: http://review.coreboot.org/7710
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=None
BRANCH=none
TEST=Ran image in foundation model
Signed-off-by: Marcelo Povoa <marcelogp@chromium.org>
Original-Change-Id: I80a92673c163b3df312ce632eb52e5bb1e7ab1db
Original-Reviewed-on: https://chromium-review.googlesource.com/185273
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Marcelo Póvoa <marcelogp@chromium.org>
Original-Tested-by: Marcelo Póvoa <marcelogp@chromium.org>
(cherry picked from commit e2f19689acb973aedee6e4b324ed27b64f2d47de)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icc3fc82779d18963f0fe8d5fb655f96027164a18
Reviewed-on: http://review.coreboot.org/7660
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
To find the coreboot tables, the payload has historically searched for their
signature in a predefined region of memory. This is a little clumsy on x86,
but it works because you can assume certain regions are RAM. Also, there are
areas which are set aside for the firmware by convention. On x86 there's a
forwarding entry which goes in one of those fairly small conventional areas
and which points to the CBMEM area at the end of memory.
On ARM there aren't areas like that, so we've left out the forwarding entry and
gone directly to CBMEM. RAM may not start at the beginning of the address space
or go to its end, and that means there isn't really anywhere fixed you can put
the coreboot tables. That's meant that libpayload has to be configured on a
per board basis to know where to look for CBMEM.
Now that we have boards that don't have fixed amounts of memory, the location
of the end of RAM isn't fixed even on a per board level which means even that
workaround will no longer cut it.
This change makes coreboot pass the location of the coreboot tables to
libpayload using r0, the first argument register. That means we'll be able to
find them no matter where CBMEM is, and we can get rid of the per board search
ranges.
We can extend this mechanism to x86 as well, but there may be more
complications and it's less necessary there. It would be a good thing to do
eventually though.
BUG=None
TEST=Built and booted on nyan. Changed the size of memory and saw that the
payload could still find the coreboot tables where before it couldn't. Built
for pit, snow, and big.
BRANCH=None
Original-Change-Id: I7218afd999da1662b0db8172fd8125670ceac471
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185572
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ca88f39c21158b59abe3001f986207a292359cf5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab14e9502b6ce7a55f0a72e190fa582f89f11a1e
Reviewed-on: http://review.coreboot.org/7655
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Also update comment for the MX25L3236D part.
Change-Id: Ifaeeb71e7672a8db55bbb66e6ce7316e2893478d
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7631
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Ic00790eedd48a2b78620fea329464701cd294cbb
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7723
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The preceding patch copied gizmo2 from the amd/olivehill
board. This commit includes the changes required to make
the code reflect the gizmo2 hardware:
- Update the vendor Kconfig to add gizmo2
- Update the mainboard Kconfig
- Update devicetree
- Add support in for the soldered down DDR3
- Update the CODEC verb data
- Update the graphics connector settings
- Adjust the temperature thresholds for the fan
What's missing:
- Interrupt routing tables
Gizmo2 can boot DOS and Ubuntu 14.10.
Change-Id: I3d7202957c082974689f2a8c04d8cd33dbdc1a89
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7722
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Iaaf68fd19f7b9a5b6849fffde3a9c68cb7862367
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7619
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Clang warns of an implicit conversion from 'double' to 'int'
e.g. changes value from '26.67' to '26'. Thus take the floor() of
the array and not change orginal behaviour.
Change-Id: Ifcc7bbfe8d627451b82053f53a885f315e2550ec
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7725
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Correct mask to select bits 4-6 inclusively as per comment and use
bitwise operations while working with bits. Be sure to write back out
the data on the retrain.
See:
commit cab9efb2 southbridge/amd/rsXY0/cmn.c: Fix bitwise logic and mask in loop
Change-Id: I95d1799514157b7849f3e473837aaf2fd9bd59b9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7692
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I22e55eb2b7fe06c416e5e4fd322045bc7031ed63
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7693
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
- In '-ffreestanding' main() is just as any other function and so
it needs a type-signature. Fixes a clang warning.
- Bay Trail and Rangeley have the updated romstage.c with the code
moved into the chipset, put the prototype in romstage.c.
- The sandybridge code has not been updated, so the prototype
for it goes into chipset_fsp_util.h, next to the prototype for
romstage_main_continue.
- Correct the return value of baytrail main() from void * to void
and remove the unnecessary asmlinkage tag. I'm surprised that this
didn't generate a warning...
Change-Id: I85ac0797d1e55d2b7ffdca039a52820d7827e704
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7724
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This is a direct copy of the amd/olivehill mainboard which
will be the starting point for this port.
Change-Id: I6a643f7ac35d89e21df0ffdf4e61a2da46e19b82
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7721
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This is not actually required. Tested on 'minnow max' hardware as
well as compared the asm of the optimized and non-optimized. Thanks Martin!
Change-Id: I06e71876c3a3a15101013623797c2ebbf449756d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found-by: Clang
Reviewed-on: http://review.coreboot.org/7694
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I826f98e450c9a614930a5e83c7c6bfb4ccdc5984
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/7630
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
|
|
Change-Id: I672c532c3f7179038d41f269bba434b8703e254b
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Found-by: Clang
Reviewed-on: http://review.coreboot.org/7718
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
If it's a 4 byte format (as per documentation), there
are some reserved bits, so let's mark them as such...
Change-Id: I50f12cfff2c9bb9d082a5f3c3ac54c0d514d862b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/7674
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove illegal character encoding in string literal.
Change-Id: I3c8dc67363705a2160e8266d1cea78c0d34d076f
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7713
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I8fbb318daacf64a14a71022705eb040a01c34fa8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7699
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Following the same reasoning as commit
ee905a8 vendorcode/amd/agesa/fam15tn: Build as a static library
Since AGESA is stage-independent, we can build it just once, and use
the resulting static library in both rom and ram stages.
Change-Id: I7798b689db3e582649eb4af4ccd1877bb1d49063
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/7698
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
