Age | Commit message (Collapse) | Author |
|
Enable 20K internal pullup for the EC_IN_RW GPIO.
BUG=chrome-os-partner:42285
BRANCH=none
TEST=build and boot on glados
Change-Id: I499164fb5050d350510072d2a06eb97fb7f9fcb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e2de7d4800797a1585165a34dd39af3d635b1f55
Original-Change-Id: I7af1b78482197701aa452998106c2c3476fcc330
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287437
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11045
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The audio codec nau8825 and two ssm4567 speaker amps are instantiated
via ACPI.
BUG=chrome-os-partner:41280
BRANCH=none
TEST=The devices are instantiated. Speaker/headphone playback works on glados.
Change-Id: I1297c2435b3051dd749ad7de324b64ba1504cf09
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 59e5eb2682a2fc2cb58068dfcb6dd2415d43b286
Original-Change-Id: Ib7ec8c868251601f67cdf365cd3e935d256c8ac5
Original-Signed-off-by: Ben Zhang <benzh@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/282364
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11044
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
some jerry panels need more delay time between the vcc_led and bl_en,
so we extend the delay time from 20ms to 120ms.
BUG=chrome-os-partner:42997
TEST=Boot from jerry, and do not flicker again
BRANCH=none
Change-Id: Ifcf84578038eb5c2e5a0dfae936ee63cef671968
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0b00b6bd108f0aae461085d00819eca08ec892b3
Original-Change-Id: I74999601b41ccac22493cc9cd0bf52cd4dbb8c26
Original-Signed-off-by: huang lin <hl@rock-chips.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287373
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The correct function prototype is
void write32(void *addr, uint32_t val)
BUG=chrome-os-partner:38073
BRANCH=none
TEST=build lp0 code and see it succeed.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Change-Id: Icadc9e2d142e5a222509e894f43b0c8a70eed031
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b46635d9d3ee1ca364e7ad6d6dd7ea9efa9dedbc
Original-Change-Id: Id2b6847af80dfddcb3b7133a663becb78ed477ba
Original-Reviewed-on: https://chromium-review.googlesource.com/285544
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11049
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The checkpatch.pl scripts complains about the placing of the inline
keyword:
ERROR: inline keyword should sit between storage class and type
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
BUG=chrome-os-partner:38073
BRANCH=none
TEST=repo upload works ;)
Change-Id: Ibd2b8a437eda2fc720f8fc32c5821bae3be41d12
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d20c0d34240966d5ae39c1667d4486b4341e183b
Original-Change-Id: I36d600c4677c622c334d849bf260323592a8a4fc
Original-Reviewed-on: https://chromium-review.googlesource.com/285543
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Original-Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/11048
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I658f88189857e25dde474d59875650f72c680818
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10972
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Based on the observations that AMD Fam10h with both Nvidia CK804 (Asus
KFSN4-DRE) and MCP55 (Sun Ultra 40 M2) need to avoid adjusting the LPC
bridge register 0x78 (particularly the 0x7b byte) to get to ramstage:
Assume that there's something about this register that adjusting it the
way we do for K8 is something that can/should be universally avoided on
all Fam10h systems with these chipsets.
Change-Id: I1eceeb20ecaefef4c61c11e19d1f5a59f91a0a2f
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10984
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
For audio to work, need to enable CLK_V_EXTPERIPH1 clock.
This CL is needed because after MBIST workaround is applied,
CLK_V_EXTPERIPH1 clock is default to be off.
BUG=None
BRANCH=None
TEST=Tested on Smaug, hear beep when press Ctrl+U at serial console
when DEV screen is showing
Change-Id: I32dccc0c7983f8fa86812d845a2f00ac9881d521
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 149d04e6ba642734d5ea36cac8206fad3ac13ce0
Original-Change-Id: Ifa1afb0798c1039c8ea9084b5a7ee3b09b4d70ac
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285604
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11041
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Enable WRAP to INCR burst type conversion in MSELECT.
MSELECT CONFIG register can only be accessed by CPU. So do
it in ramstage when CPU is started.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: Iee05531c45e566f47af24870be6068247c2d9a00
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 21d9e4d3a8827f7bba57c03ca36b702aaba1ce20
Original-Change-Id: I6a241455b28f24b8756ad09bf7605a2e7e52af57
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282418
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11040
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
MBIST has left some registers in non-suggested states. This CL
restores CAR CE's, SLCG overrides & PLLD settings.
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I1ddb19dd9fb6d8fb4d36e67eedeb847c6fd9f774
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 37a1c90c6deb351b2ae2caa03e5076553126744b
Original-Change-Id: I613b4ef622d64305d436cb8379a5170b0fe1c9af
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282417
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11039
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Like in cold boot path, need to set CAR2PMC_CPU_ACK_WIDTH to 0
in lp0 resume path.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Tested on Smaug; able to suspend/resume
Change-Id: Iffd7fa4d0266e2ec482ec17e5203ceff8afe748f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 052b649b1e6a4e34d621d710ee43aec7149ab8a8
Original-Change-Id: Icdf9879469485fb37b820b30c9663eda528ac013
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286600
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/11037
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
MBIST workaround needs more space in bootblock.
bootblock += 4KB; romstage -= 4KB
BUG=None
BRANCH=None
TEST=tested on Smaug, still boot to kernel
Change-Id: I8338d0a134185a425af36e302dcf0ed1520b7e21
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 388523bf4fa25ff3ecf9607ff36ce7c6109485ed
Original-Change-Id: Ib08f2ff438f9d96a19b44af1b3e13260966f98f1
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/287286
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11038
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
BUG=chrome-os-partner:43022
TEST=None
BRANCH=None
Change-Id: I41c904603e7213da1c8d8e0945b572f6ba844031
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d91722317ffc55a4848e8e3bdac8412218fe1dc4
Original-Change-Id: I1ed4c7aaa35158815f8f7a94eafb77db55a381d0
Original-Signed-off-by: Jonathan Dixon <joth@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/287300
Original-Reviewed-by: Jason Simmons <jsimmons@chromium.org>
Original-Reviewed-by: Karl Townsend <karlt@chromium.org>
Reviewed-on: http://review.coreboot.org/11036
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Update the write protect GPIO reported in ACPI to be 71 which
is GPP_C23. Also update the controller id to INT344B:00 which
will point at the sunrisepoint device in /sys/class/gpio.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=verify crossystem output with and without WP enabled
Change-Id: I625859bd8ac371a5c0cae18697dccf216c26a8b6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8fc5cb6b72dacd6aefe69fe8204f4e0d209ed8a4
Original-Change-Id: I04892e75f9bfe739c44eb40e7c6a969c33e157ca
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286842
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11035
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The FSP memory info hob does not return this data so we need
to supply it from the SPD included with the mainboard.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=execute "mosys memory spd print all" on glados
Change-Id: Idfb71d36d1f8163d0daceb68675b10194db7cde7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 7feece45900e5166864927047ad3ab7b997f8258
Original-Change-Id: Id2bc544ac5faf53f0f676fe132fea1db5640a401
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286877
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11034
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Since the FSP memory info HOB does not return all the data that we
need about a DIMM add a weak function that will allow the mainboard
to supplement the generated memory_info structure.
Ideally this would not be necessary but until FSP returns the
module part number we need this.
BUG=chrome-os-partner:42975, chrome-os-partner:42561
BRANCH=none
TEST=run "mosys memory spd print all" on glados
Change-Id: Ic6d0ee0a31d23efcf7e7d7f18a74e944e09e7b46
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 34ad7f1906ba526e52d38d5a6bce7b88b83f0c13
Original-Change-Id: I8509c5c627c1605894473fdea567e7f7ede08cf9
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286876
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11033
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add SMBIOS symbols to define the memory width. Update the Intel common
code to display the memory width and provide the memory width to SMBIOS.
Also display the memory frequency, size and bus width in decimal.
BRANCH=none
BUG=None
TEST=None
Change-Id: I67b814d79fdbbf6ce65ac6b4a8282ab15fb91369
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0e59c7260afd180f3adcbeda7cef1b9eca3ed846
Original-Change-Id: Ibd26812c2aad4deaab62111b1e018be69c4faa7b
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/282115
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11032
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The write protect gpio is not added to the gpio map
so the structure is not valid for vboot to consume.
BUG=chrome-os-partner:42560
BRANCH=none
TEST=build and boot on glados, check basic crossytem output
CQ-DEPEND=CL:286911
Change-Id: I228d75049b919449072e395699c822203a08f1c6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d15438c4bf56d92189f2f501a62b55b5d00ba461
Original-Change-Id: I3290c4b96e1cc675c618a983915b778f11175020
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286930
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11031
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove the C types and functions from PCR so that pcr.h
can be included from assembly and ACPI. While in there
make the PCR reg caclulation using a C function and
place the P2SB (PCH_PCR_BASE_ADDRESS) address in iomap.h.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I9cde178bcdbf49327ef7892393fc277f6c74f34b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: fdf5c77ecfa0ca8d3c45604d15b9dec9a6e85193
Original-Change-Id: I5996efaa9869f8f412e4d45c13f30233384a38b2
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286901
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11030
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The current primary to sideband (P2SB) code for private configuration
register (PCR) access weren't very clear with the naming or
reasoning for some of the code. Provide more verbiage surrounding
this interface.
BUG=None
BRANCH=None
TEST=Built and booted glados.
Change-Id: I5b2e84444a29b2fc2f527502e8c9f26eb60e687a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 06345ba1abd893059a6584856851f92f43289247
Original-Change-Id: If57a4bbc90365c1135b4986dce328b5dbabe483b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286900
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11029
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
No devices are connected to i2c4 bus on
both strago and cyan board.
Hence disabling the ALS platform data.
This will fix the i2c4 timeout issue and
also help in boot time optimization.
Removed unused macros.
BUG=None
BRANCH=chrome-os-partner:41934
TEST=After booting to kernel, i2c4 timeout
error message should not appear in dmesg.
Change-Id: Ib7ab4c95b0830a8d4e53c6c0ee919649ad1ed354
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3c52b64037b46016fe01f1d55c4c58f7684eb778
Original-Change-Id: Ia7acdcef67a2f2837866f56aa0426a02ee05db46
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283608
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11005
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In BCRD2, RTEK audio codec is connected to I2C4.
Create a RTEK device entry on I2C4 to enable Audio
on BCRD2. In BCRD1, RTEK device is connected to I2C2.
Having two devices with same HID breaks the Audio
on BCRD2 even if I2C2.RTEK._STA returns 0. The Audio
codec driver in kernel is hard coded to use first
instance of the device (:00). When two devices are present
with same HID, first device gets an instance number :00
even though _STA returns 0. Second device which is on I2C4
and POR for BCRD2 assigned with instance number :01. The
device with :01 is not getting enabled since the Audio codec
driver supports only :00. This need a proper fix in kernel
which is in the pipeline. Audio on non BCRD2 platforms on
Strago build would be disabled since RTEK device is not present
on I2C2.
BRANCH=None
BUG=None
TEST=Build and boot the system
Change-Id: Ia97d011c951275e6179c8b79a22c496b8169356b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d71a41ee703e6f60299b9e31a408af2ca06d8e24
Original-Change-Id: I4b032e930e46da77474f8f5969e95f9560b3e905
Original-Signed-off-by: Jenny TC <jenny.tc@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285193
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Divagar Mohandass <divagar.mohandass@intel.com>
Reviewed-on: http://review.coreboot.org/11003
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
TEST=built for samus and veyron_jerry
Change-Id: I7173f46d2ed2e323bff227a484c32c4bb6f6c828
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: http://review.coreboot.org/11028
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Moves the K8 CPU_ADDR_BITS definition from socket to model.
Previously socket_F was not setting CPU_ADDR_BITS correctly.
Tested on Sun Ultra 40 M2 with two 2nd-gen Opterons w/ 2x4x2GiB DIMMs.
Most if not all K8-based chips support 40-bit physical addresses, with
possible exception of IA32-only K8-based Athlon XP-M chips.
Probably irrelevant, unless your machine has enough memory (at least 60 to
64GiB before MMIO hoisting) to exceed the CPU_ADDR_BITS default of 36 from
src/cpu/x86/Kconfig.
Change-Id: I01a2a59fa902280171840c36ca2e631476d3d603
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10963
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The new toolchain depends on it.
Change-Id: I9070925eeb3f63a6c31e7474ffb9cba15884703d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10976
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3cf6a579f4e62a59828e81aa63c3a1a020a15ea6
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10906
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For people new to Linux, add the xxd hint to compare output with output
from Linux.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Ia46aeed056b12abbadf8205b044944385d9410e1
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Found while doing code review.
Simplify the code by using a loop for positive and negative phase
adjustments.
Change-Id: I0980443d0d2815bccef969709fddecc07d61a788
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: http://review.coreboot.org/10890
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
Issue observed:
Two memory DIMMs are placed in the same channel, but only one shows up.
The SPD is read and printed, but the first DIMM isn't recognized any more.
Due to an existing but unconfigured memory DIMM the timB test failed.
Test system:
* Intel Pentium CPU G2130
* Gigabyte GA-B75M-D3H
* DIMMs:
* crucial 2GB 256Mx64 CT2566aBA160BJ
* corsair 8GB CMZ16GX3M2A1866C9
Problem description:
The channel's rankmap was overwritten by the second slot's rankmap.
Problem solution:
Logical OR the channel's rankmap with every slot's rankmap.
Final testing result:
The DIMM is recognized and can be properly configured and used.
The timB test doesn't fail any more.
Change-Id: I17a205ff4d344c13d9ddfe71aaae2f3cef047665
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: http://review.coreboot.org/10960
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
Change-Id: I8644b04f4b57db5fc95ec155d3f78d53c63c9831
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10579
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Change-Id: I694b739a29e9d82d153d9fb3b729dc250bd4901e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Signed-off-by: Scott Duplichan <scott@notabs.org>
Reviewed-on: http://review.coreboot.org/10583
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
|
|
Baytrail FSP Gold4 release added 5 PCD options. Update UPD_DATA_REGION
structure to include these new PCD options and initialized the setting
when given in devicetree.cb.
Change-Id: Ic343e79479464972455e42f9352b3bb116c6f80f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/10838
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
In case of continuous mode, use STA_ACTIVITY bit to determine if DMA
operation is complete. However, in case of ONCE mode, use STA_BSY bit
to determine if DMA operation on the channel is complete.
This change was propogated from T210, commit ID fe48f094
BUG=None
BRANCH=None
TEST=Ryu/Rush build OK.
Change-Id: I13073cc12ed0a6390d55b00c725d1cc7d0797e23
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: aab62d5148b57fd1e05c1e838eafe8fdee431ef8
Original-Change-Id: I7388e9fd73d591de50962aaefc5ab902f560fc6f
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286468
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11017
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
BUG=chrome-os-partner:40741
BRANCH=None
TEST=tested on Smaug; able to suspend/resume
Change-Id: I3e796bee4b1bedfd4cce0a37549108d5271658a6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 207ca26cb2c157c0dcf476c4d4973b4d4ec67cc7
Original-Change-Id: I8565d4cf1632d6d3023aa55b2bff824a092f2c3b
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277025
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11018
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
Address region from 0x0 to 0x00ffffff is used for IROM_LOVEC and
can not be accessed by Bootloader.
Issue found in CL: 283104 is captured by this patch.
BUG=None
BRANCH=None
TEST=Compiles successfully and reboot test does not crash in firmware
Here are memory mapping table before and after this CL for evt2 board:
Before:
Mapping address range [0000000000000000:0000000040000000) as cacheable | read-write | secure | device
Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal
Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device
Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal
Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal
Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal
After:
Mapping address range [0000000001000000:0000000040000000) as cacheable | read-write | secure | device
Mapping address range [0000000040000000:0000000040040000) as cacheable | read-write | non-secure | normal
Mapping address range [0000000040040000:0000000080000000) as cacheable | read-write | secure | device
Mapping address range [0000000080000000:00000000feb00000) as cacheable | read-write | non-secure | normal
Mapping address range [00000000fec00000:0000000100000000) as cacheable | read-write | secure | normal
Mapping address range [0000000100000000:0000000140000000) as cacheable | read-write | non-secure | normal
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Change-Id: I07d38a8994c37bf945a68fb95a156c13f435ded2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3eee44944c2c83cc3530bfac0d71b86d3265f5b2
Original-Change-Id: I2b827064807ed715625af627db1826c3a01121ec
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285260
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/11015
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Even if DEBUG=0, BL31 puts NOTICE(..) messages on serial console. Set
LOG_LEVEL=0 if coreboot does not use serial.
BUG=None
BRANCH=None
TEST=Compiles successfully and no console output from bl31 for
production images.
Change-Id: Ie77bcac3e2a0d314545b6811327c413536c77fb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e8e3bcbf6249c80850a87dd66f34d3ff36158641
Original-Change-Id: I1415a3816cd2fa9dd05bcbd36ac0abc3f2759960
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286150
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/11014
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:42881
BRANCH=None
TEST=Using ctrl-d in recovery mode to switch to dev mode works.
Change-Id: Iefbd11d435c4beb570875d4835a085b194d1d1e8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: be172409792a224855b1d31621f23d1969d319b9
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Change-Id: Icf57dfc4cc258aa2cba341f40d285f8c843aace5
Original-Reviewed-on: https://chromium-review.googlesource.com/286612
Original-Commit-Queue: Hannah Williams <hannah.williams@intel.com>
Original-Tested-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11013
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
If the Host Command payload is less than 4 bytes
and is word aligned then the payload was not transferred at all.
EC reads the old packet and CRC mismatch occurs.
In this issue, the HC command packet
consisting of EC_CMD_REBOOT_EC as command and EC_REBOOT_COLD
as payload encountered the same problem as above.
Hence select byte access mode for shorter payloads.
BRANCH=None
BUG=chrome-os-partner:42396
TEST=System should boot after
chromeos-firmwareupdate
Change-Id: I22bdb739108d31b592c20247be69c198d617d359
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8a43d2636b1bbfbac0384e1ea5e8853a7bd87a7f
Original-Change-Id: I5572093436f4f4a0fc337efa943753ab4642d8e4
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Signed-off-by: Icarus Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286537
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11012
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Log the global reset causes in the power state structure.
While working in there pack the struct and use width-specific
types as this struct crosses the romstate <-> ramstage boundary.
Lastly, remove hsio version as it wasn't being written or read.
After global reset induced:
PM1_STS: 0000
PM1_EN: 0000
PM1_CNT: 00000000
TCO_STS: 0000 0000
GPE0_STS: 00000000 00000000 00000000 00000000
GPE0_EN: 00000000 00000000 00000000 00000000
GEN_PMCON: d8010200 00003808
GBLRST_CAUSE: 00000000 00040004
Previous Sleep State: S0
BUG=None
BRANCH=None
TEST=Induced global reset on glados using ETR3 register and write
to cf9.
Change-Id: I97b93de336e74c0e02199241376e74340612f0a7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: bbc8f1d62131c0381e9d401f3281ee7a17fc2a47
Original-Change-Id: I1a8e5d07c6c0e09c163effe27491d8f198823617
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286640
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11011
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The GPIO mapping was incorrect for wpsw_cur.
The GPIOs for East community were in two ranges:
0: INT33FF:02 GPIOS [373 - 384] PINS [0 - 11] and
12: INT33FF:02 GPIOS [385 - 396] PINS [15 - 26]
The discontinuity was not accounted for, hence the error.
The original offset was 0x16 whereas it should be 0x13
BUG=chrome-os-partner:42798
BRANCH=None
TEST=Run crossystem and test wpsw_cur entry. If screw is present,
it should be 1 and if not present, it should be 0
Change-Id: I2faea1fe1415c9d4cb23444d03c7c9d47c87e8e5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 30ac96f606a5618e9ef12bac3f50fac433141acd
Original-Change-Id: I166a7c3e15a990b507ae3c13e15ab56bee7fb917
Original-Signed-off-by: Hannah Williams <hannah.williams@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286534
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/11010
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Document the lid open state and separate the routines with a single
blank line.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: I244f20c03bc7530ad8d140fba41dd97c12c079e1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 57313253fdef3f2d3f0e16b8ab8aa91202d45b16
Original-Change-Id: I7b3bd9cf16e915d214eb2de0017a8d91a934b112
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286267
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11009
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Remove the address from the copyright notices.
BRANCH=none
BUG=None
TEST=Build and run on Kunimitsu
Change-Id: Ibe8196841d9e76c9ee3a3dbae802ecc63dc7904c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cc12d2658324a375d02748098f0a2f4b5d1b5615
Original-Change-Id: I81a71e4ad9b8a66ad0e9a93cbeb512d90eb35906
Original-Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/286266
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Tested-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/11008
Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Tested-by: build bot (Jenkins)
|
|
If a resume from S3 is occuring one needs to take into account
deep S3 in order to check the proper power failure bits.
When deep S3 is enabled the suspend well will be turned off.
Therefore don't look for that bit when determining a power
failure.
BUG=chrome-os-partner:42847
BRANCH=None
TEST=Suspend and resumed with deep s3 enabled and disabled.
Change-Id: I2b3372a40b3d8295ee881a283b31ca7704e6764a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a3ba22be37d8700f4e8a4a0f5c05fb9290cfc9b2
Original-Change-Id: I890f71a7cbea65f1db942fe2229a220cf0e721b0
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286271
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11007
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
GEN_PMCON_A and GEN_PMCON_B are 32-bits wide. Read out and
save the full 32 bits for completeness.
BUG=chrome-os-partner:42847
BRANCH=None
TEST=Built and booted. Noted output on terminal.
Change-Id: I24e589271d49c8cfc3fab327cfe4999c24fb95d8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5a419b2538dc45b1bd0d19b7e6afd45fff9dd4a0
Original-Change-Id: Ie587e886ea34e36d106ff4670781467266a51ddb
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/286270
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/11006
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Charger performance states table defines charger current limit for each
p state. Modify charger current control values for SANYO battery used
in Cyan.
BUG=None
BRANCH=None
TEST=System is charging battery, in shell window, issue command
"echo 0 > /sys/class/thermal/cooling_device4/cur_state",
"echo 1 > /sys/class/thermal/cooling_device4/cur_state",
"echo 2 > /sys/class/thermal/cooling_device4/cur_state",
"echo 3 > /sys/class/thermal/cooling_device4/cur_state", or
"echo 4 > /sys/class/thermal/cooling_device4/cur_state", will see EC
console show different charging current value.
Change-Id: Ie9bc78822a73de6bed338bfbcc5e9045653689dc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a6162151d1f9c756a13d2afc17f6b9c18608efc
Original-Change-Id: I71e8247d057e4728eedcd5e8a275b64428290d09
Original-Signed-off-by: li feng <li1.feng@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285605
Original-Reviewed-by: Icarus W Sparry <icarus.w.sparry@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Reviewed-on: http://review.coreboot.org/11004
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the Serial IO modes for UART2 to PCI mode
in devicetree for glados board.
Also we switch over to CONSOLE_SERIAL8250MEM_32 here. 8-bit
legacy UART will stop working after devicetree change.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for glados and tested LPSS logs on glados.
CQ-DEPEND=CL:284881 CL:284882 CL:284883
Change-Id: I433979c852c80848c006ef089b43d75a17e761c5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2c37519e0762801cbb9b547b538b385c84299189
Original-Change-Id: I2faec08d089e407c5ab9838bea980553f49821c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284826
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11002
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch updates the Serial IO modes for UART 1 and 2
in devicetree for kunimitsu boards.
UART1 are disabled and
UART2 is in PCI mode.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for kunimitsu and tested LPSS logs on Kunimitsu.
Change-Id: I5a46ab9e0b792478ee2e0845aeab1443423a2fac
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38c7b963a9d679ee5106c5343e1173d0b5056627
Original-Change-Id: I39cbb6bb0991e5f9b3365adaf6b24818d112cd1a
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284825
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11001
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch updates the Serial IO modes for UART 1 and 2
in devicetree for sklrvp boards.
UART1 is disabled and
UART2 is in PCI mode.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for sklrvp and tested LPSS logs on RVP3.
Change-Id: I59a657d6a3744040ec6be290ba966672e0e5f17e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5a20a70801d66abd87d4214e1ef187b86eed99da
Original-Change-Id: I381374272e1824ca8887ea5c5662215dde2c0a56
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284824
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/11000
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This patch adds 32bit uart8250_mem functionality in romstage
console for arch/x86.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for sklrvp; verified romstage logs on RVP3 board.
Change-Id: I6f13216b7f5ba8de48c781cd1791d0fa7ae0d921
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: a17efdeec5524cbfc78015c358d1cf4f67485765
Original-Change-Id: I8b4e44c59bfd609a06807243df338763054b5865
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271800
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10999
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch adds UART8250MEM_32 feature flag to support
UART8250 compatible with 32bit access in memory mapped mode.
[pg: rebuilt to reuse the existing UART8250 8bit access driver
which reduces code duplication.]
Change-Id: I310e70dfab81dcca575e9931e0ccf93af70efa40
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0c3b2c628b854e8334540ff5158c2587dbfabf95
Original-Change-Id: I07ee256f25e48480372af9a9255bf487c331e51d
Original-Signed-off-by: Rishavnath Satapathy <rishavnath.satapathy@intel.com>
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/271759
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10998
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0c196ff84484717c59c59d11bb7230b5920e0654
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10997
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
printk called before console init causes sluggish execution because
of Rx timeout.
BRANCH=None
BUG=chrome-os-partner:40857
TEST=Built for sklrvp and tested LPSS logs on RVP3 and Kunimitsu.
Change-Id: I61d5c0f5a4e93695bcba90b7ac7d4f68e2d625be
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 77c58702c8279c6d9c6ae1c946bf1b76df20714d
Original-Change-Id: Ib85029456059248cc2c88aaccba4fa12cc5a76be
Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284823
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10996
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
FSP will initialize GPIOs during TempRamInit.
So configure LPSS UART2 GPIOs in native mode
after TempRamInit.
BRANCH=none
BUG=chrome-os-partner:41374
EST=Build and boot on RVP3. Check LPSS logs on UART2
Change-Id: I8016dd76a5bc06e90f9460273be7e83c5e8f8bb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb72e715ef3f566e900727ac8b9494bca1d5971c
Original-Change-Id: If1b1a1047ebd5e5f170d91972d11c51aa6fd84a9
Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281604
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10995
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
On Skylake, only UART2 is supported as debug port and the macros
INTEL_PCH_UART_CONSOLE_NUMBER, INTEL_PCH_UART_CONSOLE and the partial
code for UART0, 1 are cleaned up for Skylake and Sklrvp, Kunimitsu and
Glados boards.
BRANCH=none
BUG=chrome-os-partner:40857
TEST=Built for kunimitsu, checked the coreboot logs on LPSS UART2
Change-Id: I2fbcfb1d1ca6f59309a77c67d022cf4f5da7f7c0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e714c18d462bc7bdd7068309fb6be77da6973642
Original-Change-Id: I9343abd90ce685ea2d676047dccbefad7457b69f
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285793
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10994
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
FSP 1.1 platforms should be conforming to the spec. In order
to ensure following specification remove the crutch that allows
FSP to no conform.
BUG=chrome-os-partner:41961
BRANCH=None
TEST=Built.
Change-Id: I28b876773a3b6f07223d60a5133129d8f2c75bf6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c3fe08c5af41867782e422f27b0aed1b762ff34a
Original-Change-Id: Ib97027a35cdb914aca1eec0eeb225a55f51a4b4b
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285187
Original-Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10993
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Disabling the wwan gpio line
since wwan is not used.
BRANCH=none
BUG=none
TEST=wwan should not connect to network on cyan/strago.
Change-Id: I9d2e5d5b185a4622218e894d3b092afe15e09289
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9a20c602b3bb768baa38b17e21cb4e5b0d9249ef
Original-Change-Id: Ib8d5fd15a172ef898ce675a85c2ea3e5f5c79144
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285304
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10992
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Removing GOP initialization in normal mode since we don't need to
show splash screen in normal mode. GOP will get initialized in dev
and recovery mode.
BRANCH=none
BUG=None
TEST=Splash screen will come only in dev or recovery mode.
Change-Id: Ia5e12cf45d723f2f14c447e29b78119552d5e1ea
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 79d1c877343704ea51143b922d9ac9209be4d4b5
Original-Change-Id: Id5ca99757427206413483d07b4f422b4c0abfa5d
Original-Signed-off-by: Abhay <abhay.kumar@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285300
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10990
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
All boards should have their L1 sub states working now so
re-enable the defaults.
BUG=chrome-os-partner:41861
BRANCH=None
TEST=Built and booted glados into OS. PCIe devices show up still.
Change-Id: Ic040fa108a662e15bb97cf8b0961f0f56683e146
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 380491f8267e60c3c6bc62486aaf21e201fcfd36
Original-Change-Id: Idc6923b1fdd1c20d463eb7782be112f90b9adbfd
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285170
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10989
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch selects the config symbol PCIEXP_L1_SUB_STATE to enable L1
substate for PCIe.
BRANCH=None
BUG=chrome-os-partner:42331
TEST=Build for sklrvp; boot and check "dmesg | grep iwl" shows
"L1 enabled and LTR enabled"
Change-Id: I97552c7700649a9f5d8646a03027c5c5e0b477b4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d3115816fbdd11c7f8ff418e0b5c86b8650c8b83
Original-Change-Id: Iaf307cb2d623cc1ce97b01d15a6b42569fd0c0c4
Original-Signed-off-by: Naveen Krishna Chatradhi <naveenkrishna.ch@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284775
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10988
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
For some unkonwn reason the pcie root port settings weren't
being honored in the device tree. Fix that omission.
BUG=chrome-os-partner:41861
BRANCH=None
TEST=Built with CONFIG_DISPLAY_UPD_DATA and noted devicetree
settings were being honored.
Change-Id: Id880eca57544efb13f5cbbc06b2634c86b7c5d29
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2d00e68ce6cfcb3d63d69848f4a8ce232f6c1257
Original-Change-Id: Idd37d65374842294f4b0c91eb841c6d1d93e92ee
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/285027
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/10987
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Unhide the SPI controller PCI device if it is enabled in
devicetree.cb so flashrom can do its job.
BUG=chrome-os-partner:37711
BRANCH=none
TEST=run flashrom -r on glados
Change-Id: Ie567f970149700d29df0ae09db4962f36cf24219
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 172eac55ad6134fe5e347e37c055b383e3b03245
Original-Change-Id: Ia77b559cc607794aecc25d6d469224d855199568
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/284948
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10986
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:40526
BRANCH=None
TEST=Verify that system boots when used with coreboot and EC
versions that also have Software Sync enabled.
Change-Id: I6ed562fa51d83ddf16fc74d35db7c0004f57c79e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 090a66c50fac21808c4721a32b1728cc904f1b00
Original-Change-Id: Ia4d87d9a177c579567c03ae113889a277ffecee0
Original-Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/283573
Original-Commit-Queue: Divya Jyothi <divya.jyothi@intel.com>
Original-Tested-by: Divya Jyothi <divya.jyothi@intel.com>
Original-Reviewed-by: Shawn N <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/10985
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is breaking the build right now. Reapply once the correct headers are in place.
This reverts commit 406effd59075cab212c5bf9c1a12759c8fad50a4.
Change-Id: I34b8717820ed58b462d4e7793711ee98fb8b882f
Reviewed-on: http://review.coreboot.org/11020
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fix typo. Use the correct math helper int-lt.
Change-Id: Ia5e722020c75595dfcfb853ea8238fb8391f9a04
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10980
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All \_PR entries needs to be changed from CPU# to CP##
so that it can support more cores.
BRANCH=none
BUG=chrome-os-partner:38734
TEST=build and boot cyan/strago boards.
Change-Id: I80a79ec8edbce46826140470645b7532ae361f91
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: ca269a7ffcd2ef16fcef93851e68c2d91104e3e1
Original-Change-Id: I48e73742dc3b11ee6e96f70bcd2d10d01609ad7c
Original-Signed-off-by: Jagadish Krishnamoorthy <jagadish.krishnamoorthy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285700
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10991
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This adds support for binarypi based boards that have
to make adjustments to the memory configuration settings.
A PlatformMemoryConfiguration[] table that describes
the memory configuration must be defined in the
mainboard folder.
Change-Id: I5e4b476a4adf3dd1f3b7843274a81ecb243d10ab
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/10672
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The new attributes increase the header size, breaking this assumption.
Change-Id: Ib23862f27650b39133deafb74a24327b098b6e86
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10942
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
BOOT_MEDIA_SPI_BUS is int, not hex.
Change-Id: I5cbcc3889a025caab921208037c8a61d224078a7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10973
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
They have been removed in the rest of the code already.
http://review.coreboot.org/#/c/4506/
Change-Id: I232cc2ccd4dd90359de4ab710486db65667500f4
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10964
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: If933a70992a6ae8228eef8d4f0386387b4e4549d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/10966
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Found by the commit hooks.
Change-Id: I9baa90ca0111ddc9cb69cbb7dd17f63e8a98a04f
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/10965
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add initial files for the cyan board.
Matches chromium tree at 927026db
This board uses the Braswell FSP 1.1 image and does not build
without the FspUpdVpd.h file.
BRANCH=none
BUG=None
Test=Build and run on cyan
Change-Id: I935839be033c25e197e78fbee306104b4162a99a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10182
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Initial files to support the Kunimitsu board.
Matches chromium tree at 927026db
This board uses the Skylake FSP 1.1 image and does not build without the
FspUpdVpd.h file.
BRANCH=none
BUG=None
TEST=Build and run ChromeOS on kunimitsu
Change-Id: I1017a66bc811af51a0921e864b589ce2cb618082
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10836
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Initial files to support the Intel Skylake RVP3
Matches chromium tree at 927026db
This board uses the Skylake FSP 1.1 image and does not build without the
FspUpdVpd.h file.
BRANCH=none
BUG=None
TEST=Build and run on sklrvp
Change-Id: I5e7fff8f62a737e627e25c1e03e343d6167041ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10343
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the initial files to support the Intel RVP for Braswell.
Matches chromium tree at 927026db
This board uses the Braswell FSP 1.1 image and does not build without
the FspUpdVpd.h file.
BRANCH=none
BUG=None
TEST=Build and run ChromeOS on strago
Change-Id: I5cb2efe3d8adf919165c62b25e08c544b316a05a
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10052
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I2821aaed1bc6324e671f68e4e4effb9dd006dcd9
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10922
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The BROKEN_CAR_MIGRATE symbol was removed in commit a6371940 -
x86 cache-as-ram: Remove BROKEN_CAR_MIGRATE option
The symbol DISABLE_SANDYBRIDGE_HYPERTHREADING is from Sage, and was
never added to the coreboot.org codebase.
Change-Id: I953fe7c46106634a5a3fcdaff88b39e884f152e6
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10941
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
New sdram_lp0_save_params() function for T210.
Due to its size, move the function from romstage to ramstage.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Build ok on Smaug; and check scratch registers
Change-Id: I420ac4c15262f2c6307bcd84beb6c5da0310c7c0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 38860895938c40062a9f860f75e31a539f15992b
Original-Change-Id: Iaa478969458946faedd295578fe7d72b5a32e701
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277022
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10952
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
So odmdata has the correct UART port of 0
BUG=chrome-os-partner:40741
BRANCH=None
TEST=build Foster ok; and check scratch20 register
Change-Id: I2c203317e6305214b74430780f2fe7b15652873a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 0a0a99ac9c7db267129e4bc3478f9bb1ece08507
Original-Change-Id: I7be10d5deb5118f1cf3e339afca94893610437f2
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/280291
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10955
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
So odmdata has the correct UART port of 0.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=build Smaug ok; and check scratch20 register
Change-Id: I59154daa5b5627d3b594ff9505e4f02de0d4d7aa
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 814cd164ab9ed9bf2e072f3728e89ea8d7cf0343
Original-Change-Id: I2252b728775cf2550d666ead0085c0ab3b72e40b
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277024
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10954
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Correct the odmdata location in bct for T210.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=build ok on Smaug
Change-Id: I2258556ec5cf5d25782e60e084f3d5657b441c86
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 288a5d71c35fbea1812ad0c91f2c6c5f5a022363
Original-Change-Id: I0efb033442c2aafc7f44898c16b3e91946e092d5
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277023
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10953
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add sdram_configs.c to both romstage and ramstage.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Build ok on Foster
Signed-off-by: Yen Lin <yelin@nvidi.com>
Change-Id: Ib270c837ebe355c8d16072186c2b27d1c469fd48
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 73bc1abf2821176c21179880774887eec7c858b1
Original-Change-Id: Ia80a57a81e44542ee3d5437866071d50c8c5b8cb
Original-Reviewed-on: https://chromium-review.googlesource.com/280290
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Tested-by: Yen Lin <yelin@nvidia.com>
Original-Commit-Queue: Yen Lin <yelin@nvidia.com>
Reviewed-on: http://review.coreboot.org/10951
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
get_sdram_config() (in sdram_configs.c) will be needed in ramstage.
BUG=chrome-os-partner:40741
BRANCH=None
TEST=Build ok on Smaug
Change-Id: I2920f8687b6a801a91dc5b5b50fc5637057e4321
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d3092e360b26cbda41549452aeeba9ffc0b92ed
Original-Change-Id: I43a20f3178cbf5b57a3a9ca7391856787aa8cdb8
Original-Signed-off-by: Yen Lin <yelin@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/277373
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10950
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CQ-DEPEND=CL:285312
BUG=chrome-os-partner:36613
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ib90333e3331a90b4539d49e1a72833fe3385879f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 042fc1a451081780f8af35af6943130f6412ca5f
Original-Change-Id: I729996c04d8bd6a627421803a59037d7c47a3e98
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285345
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10949
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Take up space from PRERAM_CBMEM_CACHE and increase verstage and
romstage sizes.
BUG=chrome-os-partner:36613
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: I7fdd6c08f3ca1998a6220edd80a570816ec65ab5
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: cce3d7baa7446e227d3da41341d9e273d4195299
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285344
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Original-Change-Id: I6d97a60b26fbbb29a875285c46724fb43b5fe5ab
Original-Reviewed-on: https://chromium-review.googlesource.com/285533
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/10948
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
1. Get rid of spi_delay - Instead have a tight loop to check for the
spi status
2. The first check for SPI operation complete i.e. FIFOs have been
processed is the SPI_STATUS_RDY bit. Thus, tegra_spi_wait should check
for this bit before reading BLOCK_COUNT or any other fifo count field.
3. Flush both TX and RX FIFOs for SEND and RECV operations for PIO and
DMA.
4. No need to check for rx_fifo_count == spi_byte_count to determine
pio_finish operation. RDY bit should be sufficient to ensure that the
SPI operation is complete. Added assert to ensure we never hit the
case of RDY bit being set, yet rx_fifo_count != spi_byte_count for
PIO.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully and reboot test runs successfully for 10K+ iterations.
Change-Id: I1adb9672c1503b562309a8bc6c22fe7d2271768e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: de1515605e17e0c6b81874f9f3c49fd0c1b92756
Original-Change-Id: I5853d0df1bfd6020a17e478040bc4c1834563fe4
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285141
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10947
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In case of continuous mode, use STA_ACTIVITY bit to determine if DMA
operation is complete. However, in case of ONCE mode, use STA_BSY bit
to determine if DMA operation on the channel is complete.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully and reboot test runs fine for 10K+ iterations
Change-Id: If98f195481b18c402bd9cac353080c317e0e1168
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 927026db6fd910dac32dc218f28efcbc7b788b4e
Original-Change-Id: Ib66bedfb413f948728a4f9cffce9d9c3feb0bfda
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/285140
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10946
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change the drive strength for QSPI Pinmux to DRIVE_STRENGTH_2 as per
recommendations from nVidia hardware engineers.
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: I5a7b94acb57bbc21d277a49fd0a6b892638fc0ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 58d085e6acbcd0fd355b1c7efc10606312caf8e8
Original-Change-Id: I03dd288d2e335d40c83feaec7efbf10a7d3bf1e6
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284959
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10945
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:41877
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt
Change-Id: Ic606838639d33242b227fece9cbb019d8f3b3729
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 805831489ad80e4ed335ece458f81238af704876
Original-Change-Id: I54a730c3b97c3603a5b1981089913c58af2a42db
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/284958
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10944
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add the files to support the Skylake SOC.
Matches chromium tree at 927026db
BRANCH=none
BUG=None
TEST=Build and run on a Skylake platform
Change-Id: I80248f7e47eaf13b52e3c7ff951eb1976edbaa15
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10341
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use the Broadwell implementation as the comparison base for Skylake.
BRANCH=none
BUG=None
TEST=None
Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10340
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
If the 8254 is not set up, the external graphics option rom
hangs and never returns.
The code is tested on AMD/bettong.
Change-Id: I0022de9d9a275a7d4b7a331ae7fcf793b9f4c5f5
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/10903
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This is a result of the Silcon Observation. On warm reset, the BIST
is 0x80000000, which causes BIST error. We skip checking this bit.
The update will be in CZ BKDG 1.05.
The code is tested on AMD/bettong.
Change-Id: I51c3f3567f758766079f7c8789f1ff072e1a7c53
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/10902
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Relevant for systems having processors that only have two (the minimum
and maximum) P-states, such as the Opteron 2210 at 1.0 and 1.8GHz.
Change-Id: Ic66fe6d10ce495c1bf21796cb7e1eb4e11e85283
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/10910
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Assume that it's 64 byte.
Change-Id: I168facd92f64c2cf99c26c350c60317807a4aed4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10919
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Bay Trail SOCs do not integrate LAN controller hence Baytrail FSP has
no LAN control function. Remove PcdEnableLan option from
UPD_DATA_REGION structure.
Change-Id: I9b4ec9d72c8c60b928a6d9755e94203fb90b658f
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/10837
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Commit bd1499d3 fixed a bug to not re-initialize the timestamp
cache in ramstage for EARLY_CBMEM_INIT. However, EARLY_CBMEM_INIT
was not included. Therefore, add this condition. This will result
in base_time being initialized to the passed in timestamp
for !EARLY_CBMEM_INIT platforms.
Change-Id: Ia1d744b3cfd28163f3339f2364efe59f7dcb719b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10884
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This allows finding the currently used CBFS (in case there are several), and
avoids the need to define flash size when building the payload.
Change-Id: I4b00159610077761c501507e136407e9ae08c73e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10867
Tested-by: build bot (Jenkins)
|
|
Use the simplified CBFS image type name in Makefile.inc.
BRANCH=none
BUG=None
TEST=Build and run on cyan
Change-Id: Idb62de7fce36fde38a6fbeeefdfc2dd0d75bd493
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10872
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Build now decides the stack size by correctly referencing the
value in /src/mainboard/emulation/qemu-riscv/memlayout.ld.
Note that while the size is correct, the placement is still
wrong, and causes the stack to be corrupted by the coreboot
tables. Still needs to be addressed
Change-Id: I86c08bd53eeb64e672fecba21e06220694a4c3dd
Signed-off-by: Thaminda Edirisooriya <thaminda@google.com>
Reviewed-on: http://review.coreboot.org/10870
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|