aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-04-21arm(64): Replace write32() and friends with writel()Julius Werner
2015-04-21romstage_handoff: Fix for changing CBMEM structureDuncan Laurie
2015-04-21veyron_{brain,danger}: Specify vboot romstage and ramstage indicesDavid Hendricks
2015-04-21rk3288: disable rk808 DCDC_UV_ACT_REG restart converter functionhuang lin
2015-04-21veyron: The ODT function is disabled for LPDDR3jinkun.hong
2015-04-21veyron: Sync up SDRAM configurationsJulius Werner
2015-04-21rockchip: configure lpddr odt properlyDerek Basehore
2015-04-21cbfs: Print absolute offsets of loaded filesVadim Bendebury
2015-04-21veyron_jerry: support K4B8G1646Q-4GB and H5TC8G63XXX-4GB ddr3jinkun.hong
2015-04-21x86: Allow builds without ACPI tablesLee Leahy
2015-04-21ipq806x: i2c: stop transfer as soon as an error is reportedSourabh Banerjee
2015-04-21ipq806x: i2c: write function fixed to avoid spurious successSourabh Banerjee
2015-04-21arch/mips: simplify cache operationsIonela Voinescu
2015-04-21rk3288: support single channel ddrjinkun.hong
2015-04-21urara: Identity map DRAM/SRAMAndrew Bresticker
2015-04-21mips: Allow memory to be identity mapped in the TLBAndrew Bresticker
2015-04-21broadwell: Clear USB3.0 PORTSC status bits in sleep_prepare.Todd Broch
2015-04-21broadwell: indent xhci codePatrick Georgi
2015-04-21broadwell: Skip pre-graphics delay in resume pathDuncan Laurie
2015-04-21broadwell: Implement Recovery ButtonRyan Lin
2015-04-21Arrange CBMEM table entries' IDs alphanumericallyVadim Bendebury
2015-04-21urara: add config of SPI bus and correct selection of winbond flashIonela Voinescu
2015-04-21imgtec/pistachio: Add spi_crop_chunk()Patrick Georgi
2015-04-20gigabyte/ga-b75m-d3v: Add GIGABYTE GA-B75M-D3V mainboardDamien Zammit
2015-04-20southbridge/intel/bd82x6x: Add LPC id 0x1e49 for B75 chipsetDamien Zammit
2015-04-20mainboard/lenovo/t430s,t530,x230:enable usb3, set xhci overcurrent mappingNicolas Reinecke
2015-04-20southbrige/intel/bd82x6x: add XHCI overcurrent map configNicolas Reinecke
2015-04-20Kconfig: rename CONSOLE_SERIAL_UART to DRIVERS_UARTPatrick Georgi
2015-04-20purin: add ns16550 driverDaisuke Nojiri
2015-04-20console: copy ns16550 driver from u-bootDaisuke Nojiri
2015-04-20chromeos: vboot2: Add TPM PCR extension supportJulius Werner
2015-04-20vboot2 workbuf alignment is now 16 bytes, not 8Bill Richardson
2015-04-20rk3288: Disable ramstage compression by defaultJulius Werner
2015-04-19southbrige/intel/bd82x6x: XHCI replace magic valuesNicolas Reinecke
2015-04-18riscv: use new-style CBFS header lookupPatrick Georgi
2015-04-18vboot2: provide path for booting using alternative CBFS instancesVadim Bendebury
2015-04-18vboot2: Implement new vb2ex_hwcrypto APIJulius Werner
2015-04-18vboot: make vboot2_verify_firmware returnDaisuke Nojiri
2015-04-18ipq806x: initialize UART even when console is not enabledVadim Bendebury
2015-04-18ipq806x: uart: replace hardware accessorsVadim Bendebury
2015-04-18broadwell: Set C9/C10 vccminDuncan Laurie
2015-04-18broadwell: Disable XHCI compliance mode entryDuncan Laurie
2015-04-18panther: Fix pointer related errors in LAN codeFurquan Shaikh
2015-04-18soc/intel/common: Add common reset codeLee Leahy
2015-04-18soc/intel/common: Add function to protect MRC cacheDuncan Laurie
2015-04-18broadwell: add ROM stage pre console init call backWenkai Du
2015-04-18kconfig: automatically include mainboardsStefan Reinauer
2015-04-17cygnus: enable mmuDaisuke Nojiri
2015-04-17cygnus: configure memlayoutDaisuke Nojiri
2015-04-17cygnus: add timer functionsDaisuke Nojiri
2015-04-17urara: Define UART used for serial consoleDavid Hendricks
2015-04-17pistachio: Move console UART to a Kconfig variableDavid Hendricks
2015-04-17Fix non-x86 __PRE_RAM__ assertions and add FATAL_ASSERTS Kconfig optionJulius Werner
2015-04-17flash: use two bytes of device ID to identify stmicro chipsDaisuke Nojiri
2015-04-17storm: Add STM flash supportVadim Bendebury
2015-04-17qualcomm/ipq806x: add spi_crop_chunk()Patrick Georgi
2015-04-17spi: allow inclusion of Micronix and STM drivers in bootblockVadim Bendebury
2015-04-17armv7: set CBFS header to zeroVadim Bendebury
2015-04-17pistachio: add DDR2 initialization codeIonela Voinescu
2015-04-17ryu: Add support for EVT board with ID BASE3(1,1)Furquan Shaikh
2015-04-17armv7: work around hang in bootblock startup codeDaisuke Nojiri
2015-04-17storm: handle dual purpose recovery buttonVadim Bendebury
2015-04-17ryu: add support for p4 boardsDavid Riley
2015-04-17ipq806x: extend GSBI driver to support i2c on any GSBI blockSourabh Banerjee
2015-04-17ipq806x: add LPASS clock control driverVadim Bendebury
2015-04-17rk3288: Add software I2C supportJulius Werner
2015-04-17ipq806x: Add support for mmu in bootblock.Deepa Dinamani
2015-04-17veyron_{brain,danger,rialto}: Enable eventloggingDavid Hendricks
2015-04-17veyron_{brain,danger,rialto}: Use common watchdog rebootDavid Hendricks
2015-04-17rk3288: move reboot_from_watchdog() before rk808 settinghuang lin
2015-04-17purin: add purin under mainboardDaisuke Nojiri
2015-04-17broadcom/cygnus: add new SoC driverDaisuke Nojiri
2015-04-17chromeos: Provide common watchdog reboot supportJulius Werner
2015-04-17veyron_*: Enable eventloggingDavid Hendricks
2015-04-17chromeos: Move memlayout.h/symbols.h into common directoryJulius Werner
2015-04-17storm: define location for storing CBFS header valueVadim Bendebury
2015-04-17cbfs: look for CBFS header in a predefined placeVadim Bendebury
2015-04-17pistachio: report UART register widthVadim Bendebury
2015-04-17uart: pass register width in the coreboot tableVadim Bendebury
2015-04-17blaze: add new Hynix 2GB BCTNeil Chen
2015-04-17exynos: return correct value when init_default_cbfs_media failsDaisuke Nojiri
2015-04-17rk3288: detect sdram size at runtimehuang lin
2015-04-17veyron: move setup_chromeos_gpios() prototype to board.hJulius Werner
2015-04-17rk3288: Handle framebuffer through memlayout, not the resource systemJulius Werner
2015-04-17arch/mips: Fix bug when performing cache operationsIonela Voinescu
2015-04-17spi: Add function to read flash status registerDuncan Laurie
2015-04-17drivers/spi: Pass flash parameters from coreboot to payloadDan Ehrenberg
2015-04-17Add delay before reading GPIOs in gpio_base2_value()David Hendricks
2015-04-17urara: add board id information for urara boardIonela Voinescu
2015-04-17as3277: Fix month-off-by-one error for RTC driverJulius Werner
2015-04-17bg4cd: define custom romstage entryDaisuke Nojiri
2015-04-17arm: allow custom stage entry codeDaisuke Nojiri
2015-04-17rk3288: Add a config variable hack to skip display initDavid Hendricks
2015-04-17veyron: Activate Winbond SPI driverJulius Werner
2015-04-15rk3288: support edp HPD functionhuang lin
2015-04-15rk3288: meet the backlight power timing requesthuang lin
2015-04-15veyron_rialto: Change recovery GPIO to PUSH_KEY.Hung-Te Lin
2015-04-15veyron_rialto: Fix boot failure in romstage.Hung-Te Lin
2015-04-15rk3288: set the rk808 BUCK default inductor current to max valuehuang lin
2015-04-15rk3288: Fix failing LPDDR3 reboot testjinkun.hong