| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: Ie7a73a5962e61585ebc427005e72715c8da4e0ac
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8451
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Iaece709f521aaf6689b71bc0c71606847c3e1e4e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8439
Tested-by: build bot (Jenkins)
|
|
In specific configurations, such as homogeneous supercomputing systems,
changeable NVRAM parameters are more of a liability than a useful tool.
This patch allows a coreboot image to be compiled that will always set
the NVRAM parameters to their default values, reducing maintainance
overhead on large clusters.
Change-Id: Ic03e34211d4a58cd60740f2d9a6b50e11fe85822
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8446
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ic86104d6e7811b0bda9279411db84f464324994a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8450
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Id837445f346e9ab0218ccca12794b519a8a71c0d
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8449
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This fixes errors of the form:
error: 'Dct0MemSize' may be used uninitialized in this function
Change-Id: Ifc853aea9050994f5641c57a081aa0667331c995
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8455
Tested-by: build bot (Jenkins)
|
|
TEST: Boot with corrupted CMOS and make sure console level defaults
to SPEW, instead of 0, and that cbmem console is not empty.
Change-Id: I8ab2423e99bbe116f52ad27f4b20427d8557f6ff
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8379
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch allows the following memory controller settings to be overridden in NVRAM:
Memory frequency limit
ECC enable
ECC scrub rate
Change-Id: Ibfde3d888b0f81a29a14af2d142171510b87655e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8438
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Currently the coreboot console log contains messages in the following
form.
Show all devs...Before device enumeration.
[…]
Show all devs...After init.
Add a space after the ellipse, so it’s better readable and it does not
look like a newline is missing.
Show all devs... Before device enumeration.
[…]
Show all devs... After init.
Change-Id: Ifa2a37b8d60c433c219df7533a79fced03b6271a
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/8424
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
On x86, change the type of the address parameter in
read8()/read16/read32()/write8()/write16()/write32() to be a
pointer, instead of unsigned long.
Change-Id: Ic26dd8a72d82828b69be3c04944710681b7bd330
Signed-off-by: Kevin Paul Herbert <kph@meraki.net>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/7784
Tested-by: build bot (Jenkins)
|
|
The default linking behavior of ramstage was changed in commit
* 8f99378 ARMv7/Exynos: Fix memory location assumptions
However, that commit failed to address the issue of maintaining
linking behavior on non-Exynos chips. As a result we ended up
linking ramstage at address 0, which is outside of SDRAM.
Explicitly link ramstage at SDRAM base for A10. This patch does not
address the issue on other chips that were broken by commit 8f99378.
Change-Id: I90fa41d3eabf110b5ab24c31b78ac6d0474e4083
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8443
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PCIe root ports on devices 0:15.0 to 0:15.3 should at first all
appear visible in hardware. The real configuration will be done by
vendorcode once we call sb_Before_Pci_Init().
Change-Id: I01a46c630aa6d55a94af45da6b78c97df7553e4f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8387
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This has nothing to do with SATA controller. We only need to
fill the table with defaults before we parse devicetree for
changes to device configuration.
Change-Id: Ic4b28b5992ec9bfdf252f61b1c86b0162243cc95
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
If devicetree.cb has GPP port off, really disable it before even
trying to do link training.
Change-Id: I810945da28d86768e88249dc4d29a50ad9f9959b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8385
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
A set of pins can be configured for GPIO or (parallel) PCI bridge use.
When requested configuration is 0:14.4 enabled, register programming
must be done before attempting to enumerate devices behind the bridge.
When requested configuration is 0:14.4 disabled, we must not even
temporarily enable pins for PCI use to avoid spurious GPIO state changes.
As our PCI subsystem currently does not configure visible PCI bridges
that are marked disabled, we cannot mark 0:14.4 disabled just yet but
need to handle pcengines/apu1 as a special case.
Drop related dead code.
Change-Id: I8644ebae43b33121ef2a7ed30f745299716ce0df
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8329
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
These sb800_enable() messages without newline mess up the log.
Change-Id: I1689b68702e08e2a287083835f310f52f495c451
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8384
Tested-by: build bot (Jenkins)
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Kconfig variable is not implemented.
Change-Id: I546a1001847e7b1002f96baf49ed3301852a6894
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8345
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Keep the slower HyperTransport configuration for a possible reference
in fam15 boards.
Change-Id: Ifcdedc6385fec80f7d02c55c2aac10e5e2429a18
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8344
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I098d1238cda16060c3566f242443007cdaf9bd82
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5106
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Probing is done by reading the ID register and comparing it to a known
value. When there is a mismatch, print an error.
Change-Id: I36fb1fe9b56e97660556dcb27be25bfe5129ad73
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8433
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The actual key values were not added in commit 17ace8255.
TEST: amd/lamar shows the correct result.
Change-Id: I8f20e3d0ce83dd87b6c233ee98c3e77a6b7c1b03
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8375
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully for rush
Original-Change-Id: Ic8f5d91f6635ef12845ab049a20df5a6e33bbf55
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203142
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit ecf7822812d8745af74eaf135b7b806c23ef51a2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I79abbded94376ba90a8c729aaf856ce303509e48
Reviewed-on: http://review.coreboot.org/8410
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: Marc Jones <marc.jones@se-eng.com>
|
|
This combines the Avalon and Bolton tables of text descriptions
of the IRQ assignments. It also corrects the text string for
the SD controller on Bolton.
Test: This was verified on amd/lamar.
Change-Id: Ibc74641eb4e1f7581f26d260ba3d33201bcbf5e7
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8374
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Verstage isn't included yet, but we need to have
the Kconfig option for toolchain.inc to pass.
Change-Id: I7fae73cd3b77fd347398221489caf745274701eb
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8409
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ib83ec5c397fdef5aa9e3376f1c0072cfa2f74fa6
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8425
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Add two macros to gpio.h which allow to setup 20K
pull-up or pull-down resistor for a given GPIO.
Change-Id: Ie3bc4d40df588ed682cc692e2a80527b9e62a483
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8402
Reviewed-by: Martin Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Two source files were accidently marked executable. Switch them back to
mode 644 (rw-r---r--)
Change-Id: Ic96f6e5e9a05cbffb65cdfb627023d04d3866dc9
Signed-off-by: Stefan Reinauer <stepan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/8426
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
Change-Id: I1e4c5c807d4a78844a40083178b6f96ffeb3659e
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8361
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
SeaVGABIOS supports both the coreboot linear framebuffer and native EGA
text mode. To use SeaBIOS interactively on standard VGA hardware a VBIOS
is needed; SeaVGABIOS is one such option.
TEST: Booted KFSN4-DRE with XGI Volari Z9s and SeaVGABIOS. Was able to
interact with SeaBIOS and comboot menu, then booted Linux successfully.
VGA display was continuously usable from power on to Linux login.
Change-Id: Id4bd4cb5cece9114457633832c5f0e5280c02b47
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8368
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I92e6e7f1292f66642aa0336064a4eccba104dd08
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/5101
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I32eccfb4eae176e0155c53efaf463258653eefc2
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8355
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The core count identification code in the PowerNow! _PSS
ACPI object generation code was incorrectly copied from the
model_fxx code. This code has been rewritten to properly
return the number of cores installed in the system.
Change-Id: I19567486f2de9dc2c43970addf4d91fa3d233a99
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8421
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The PCI id defaults to 1106,3230 -> via chrome 9 ...
Tested on the board.
Change-Id: I5ad91faec9c97f34c8ca48eee9198237e9ea8336
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
microcode updates are extracted from: www.amd64.org/microcode.html
Mircocode versions of 1020h and 1022h are more recent in coreboot
than inside the AMD archive.
Change-Id: I9f52accc1ebc7057890a769a059048e9982109d2
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8354
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This resolves an issue on Shanghai dual CPU configurations where
the APs on node 0 would not start. Single CPU configurations are
unaffected by this issue.
TEST: Booted KFSN4-DRE with dual Opteron 8389 CPUs and verified
proper BSP/AP start and microcode patch levels.
Change-Id: I0f5d4e0e356c6bd64e324b4399ef43b400ecab0c
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8397
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Improve documentation of lock down MSRs in finalize().
Most of these aren't documented in public MSRs.
Change-Id: I4fc47bb9b71bdd7907aae65fc18b419a17ae8547
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-on: http://review.coreboot.org/8294
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Peter Stuge <peter@stuge.se>
|
|
There is no auto-detection for AGP type and we have no hardware that
selects this. Furthermore, we treat AGP bridges just like PCI bridges,
there is no optimisation for higher bandwidth.
Change-Id: I4fe87c83411643cb9b8d3216f2af07bf098174d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8367
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
By adding a description to ME_PATH it becomes visible
and editable in menuconfig.
Change-Id: I8c2f6a30c10f16b19f3667263db02c93688c9f8f
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: http://review.coreboot.org/8398
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The original firmware has a 2 MiB BIOS region in both 4 MiB and 8 MiB
flash variants. Let's allow using the whole region instead of the
gm45 default of 1 MiB.
Change-Id: I2d8a04bcb992bf2e8e15890a5c6719810b1cf405
Signed-off-by: Michał Masłowski <mtjm@mtjm.eu>
Reviewed-on: http://review.coreboot.org/8392
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Fix a mistake that led to an invalid 0ms latency in the automatically
generated PowerNow! ACPI _PSS objects.
TEST: Booted FreeBSD and Linux and verified correct latency values.
Found-by: Coverity Scan
Change-Id: I03cecab694708136dc555ca2af7ee9a0bf9be5af
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8376
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Because the pointer to the FSP HOB list is now being saved, we can
use that to find the top of usable memory. This eliminates the need
to hardcode the size of the FSP reserved memory area.
Tested on minnowboard max for baytrail.
The HOB structure used does not seem to be present for the rangeley
or ivybridge/pantherpoint FSPs. At the very least, the GUID is not
documented in the integration guides.
Change-Id: I643e57655f55bfada60075b55aad2ce010ec4f67
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8308
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The "used" attribute was added in commit 27cf2472 which caused these
warnings to start appearing when using the standard coreboot GCC
toolchain:
{standard input}: Assembler messages:
{standard input}:96: Warning: ignoring changed section type for .car.global_data
{standard input}:96: Warning: ignoring changed section attributes for
.car.global_data
The # at the end of the section name causes the assembler to
ignore everything following the name. I verified that the resulting
binaries are the same with and without the #.
Change-Id: Iaac8042533842ed887f33895f083b613a18f496a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8301
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Now that BROKEN_CAR_MIGRATE is fixed we can stash these in CAR.
Change-Id: I49c31b91f34d415778797d08a347a51dbef797e3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8024
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The port is based on the x230 / t530.
Tested - is in active use.
Change-Id: Ic5ccfe70343e8aef3465690edce9cdebf153a44d
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8359
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
cmos_init() had layers of preprocessor directives, which resulted in
a complete mess. Refactor it to make use of the IS_ENABLED() macro.
This improves readability significantly.
One of the changes is to remove in inline stub declaration of
(get|set)_option. Although that provided the ability for the compiler
to optimize out code when USE_OPTION_TABLE is not selected, there is
no evidence that such savings are measureable.
Change-Id: I07f00084d809adbb55031b2079f71136ade3028e
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8306
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This macro is controversial for arches where the bits are numbered
MSb first, though we don't support such an arch. We've seen this macro
creep into our tree in different places, so provide it in one place.
Change-Id: I86cd8a16420f34ef31b615aec4e0f7bd3191ca35
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8280
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: Ib00ecdcad17fa5c0300d22378837e36d0918f9db
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8369
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
TEST: Booted KFSN4-DRE with on-board XGI Volari Z9s
Initial text from coreboot appeared, and the Linux
console was displayed immediately at the start of
kernel initialization. After boot was complete
the text mode console continued to behave normally.
SeaBIOS does not currently make use of the legacy
VGA text-mode display.
Change-Id: I2177a1d00e6f07db661dd99fe0184e2c228404d1
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8360
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The indentations of #define are not consistent in chip.h. Update to make
all #define indentations being aligned and put them after the variable
declaration.
Change-Id: I37550acac18bac3efddb580ef6b956be0e2b357a
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/8333
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
1) Save the pointer to the FSP HOB list to low memory at address 0x614.
This is the same location as CBMEM_RESUME_BACKUP - the two aren't used
in the same platform, so overlapping should be OK. I didn't see any
documentation that actually said that this location was free to use, and
didn't need to be restored after use in S3 resume, but it looks like
the DOS boot vector gets loaded juat above this location, so it SHOULD
be ok. The alternative is to copy the memory out and store it in cbmem
until we're ready to restore it.
2) When a request for the pointer to a CAR variable comes in, pass back
the location inside the FSP hob structure.
3) Skip the memcopy of the CAR Data. The CAR variables do not
get transitioned back into cbmem, but used out of the HOB structure.
4) Remove the BROKEN_CAR_MIGRATE Kconfig option from the FSP platform.
Change-Id: Iaf566dce1b41a3bcb17e4134877f68262b5e113f
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8196
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I2d00a2964b16436356c5e02764897e37ef610efc
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8343
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I953ced7d34af9ec0923fa6df93b9ad4270196c77
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8332
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Add native XGI Z9s framebuffer support to coreboot
XGI initialization code largely taken from Linux 3.18.5
TEST: Booted KFSN4-DRE with XGI Volari Z9s into SeaBIOS
with SeaVGABIOS enabled. Text appeared correctly on screen
and interaction with graphical comboot menu was successful.
However, Linux cleared the framebuffer on boot, rendering the
screen useless until Linux loaded its native xgifb driver.
Change-Id: I606a3892849fc578b0c4d74536aec0a0adef3be3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8331
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This copies what was done in southbridge/amd/agesa in:
commit 56f46d8 agesa/family15tn: Switch to per-device ACPI
TEST: amd/lamar.
Change-Id: Id8890ccd4a1ea783ad4740333ae6b061b6bbd7fc
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8288
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I208c931bdaee572c9df11b35c1e6e9f27609ea6c
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8287
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This adds the PCI and interrupt related definitions
for the bolton specific features.
Change-Id: Ia6530c57ec5a4a5c4525bfbae0eb5db04c0bef9e
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8286
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: Ia4398f6eb013c69838487bdd02d094f97d7224b6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8342
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Tests on CPUID are valid regardless of revision.
Change-Id: I5a3a01baca2c0ecfb018ca7965994ba74889a2e2
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8337
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Keep the value that is listed first, it also the one with a more
recent change.
Change-Id: I0336c962544d75f94512563c08f280aa43c7a175
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8336
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I875384e55a4a71d1a5c962d128d13356f3befa56
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8335
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The amd/lamar mainboard is the first mainboard to use the f81216h.
These changes are needed to fix up commit 27a63d77 so the
Super I/O builds and functions correctly.
- Wrong #include name
- Removed global variable in romstage
- Missing "case" in switch()
Change-Id: I1b2058a915b776664fba14e4341e8a410b50330f
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/8255
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I6370e971922dee5e8d476a883c5f0f32fbbc8911
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4534
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Include microcode updates in CBFS for every CPU revision the platform
can support, as changing to different CPU revision should not require
a coreboot rebuild.
This increases CBFS usage from 2 kB to 14 kB.
Change-Id: I6bf90221a688f1a54e49641ce3ba378c5bf659f9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/4521
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
Change-Id: Ic67856414ea2fea9a9eb95d72136cb05da9483fa
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/4502
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
This option is now deperecated by loading microcode updates from cbfs.
Remove this option in anticipation of implementing CBFS loading for
AMD cpus. Removing it beforehand results in less patch overhead.
Change-Id: Ibdef7843db686734e2b6b1568692720fb543b240
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8322
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
|
|
Use HT MSI Mapping capability register at 0xe0 in CK804 HT device to enable
HT MSI Mapping so that MSIs work. Prior to this change PCIe devices
downstream of the CK804 with MSI enabled would fail to actually assert
their interrupt. Tested on msi/ms7135 and winent/mb6047 running Debian
GNU/Linux 7.0 (wheezy).
Change-Id: I5e0dc8b352f3d04e3b16b899af11d2b908a82850
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8276
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Although bool normally belongs in stdbool.h, for our use cases,
providing these definitions in stdint.h is acceptable.
Change-Id: I1d0ca1018efacc27d7a4a72aa452912e004401f9
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/8279
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I9b45b7fbd862a5600ead7ad4e623a8a87ae364aa
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8319
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I63bdc856fa4232cd66ff2e48e39c2cdb97bb88d3
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8316
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I245c0afb66f3a29b5acb40e8d949d8b1aa08cd73
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8315
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib0bb8bed32b96a5f7fd48407bd111972f89e7907
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8314
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Fixes USB3 ports degraded to USB2 speeds.
Change-Id: Ie71c9fb6e52a3e72bb1e61351ad1cc0492d93cbc
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/8313
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ica1cc90715c1810668e3f4f7282e5757a5688483
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/8312
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rangeley POST-GOLD 2 FSP added PCIe ports de-emphasis configuration
by UPD input. Update UPD_DATA_REGION structure for matching up this
FSP change.
PcdCustomerRevision is a debugging aid that will be output to debug
message in FSP. When needed, it can be customized by BCT tool for tracking
BCT configurations.
Change-Id: I6d4138c9d8bbb9c89f24c77f976dbc760d626a9b
Signed-off-by: York Yang <york.yang@intel.com>
Reviewed-on: http://review.coreboot.org/8107
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
This patch clears the CAR area. The FSP loads the entire CAR area with a
pattern instead of clearing it. At least the cbmem area needs to be
cleared or cbmem will not use it.
Change-Id: I829ddc26133353a784dfc01729af9b3bf427e889
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8195
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Test:
Single Opteron 2419 with 1GB RAM in slot A1
Booted Ubuntu Linux 14.04 and verified all 6 cores were visible
Brief stress test of all 6 cores simultaneously
Verified proper ACPI power states for all 6 cores
Change-Id: I1e598e36f9eaed5ba8a18b9c62ceedee16870f15
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8311
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Move mapping tables to struct and prevent OOB array
access that was crashing the APs during CAR initialization.
Change-Id: I9e2554b50ad60a8d02ef4bd3fbee6fddb238d83f
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8310
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I52587c0c0dffd814d39087475b8f14c500a68933
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8309
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
05000028 -> 05000029 tested on asrock E350M1
05000101 -> 05000119
Change-Id: Iccb096eb55a4a789c1e810f68c8c8eacfd5f8a0b
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8296
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
same as 37130ebdabe44989787aadeafbe79524970dec75
Change-Id: I73feed3a077dfcc61634147775df1e05fdb97e8b
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8278
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I6c13518d2217bc823d409ab800bca011e76e9f25
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8277
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some magic numbers are documented in the PCH datasheet so use them.
Change-Id: I15b58ff99b3bc11ac437e5ea74f4f01b7c02032a
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8307
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
OC2 at port 4 was missing. Verified with RCBA dump.
Change-Id: Ide5701d53aeee28619204c7ac408662626aa11e4
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8304
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
thinkpad_acpi checks that BIOS version matches some pattern.
Report version in this form.
same as http://review.coreboot.org/4650 /
63acd22dc5366c72a7165138f5030df9523824dc
Change-Id: I82d7a2b9f2ec56557b3a9c26d1af57ed39e31850
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/8302
Tested-by: build bot (Jenkins)
Reviewed-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Copied from device_util.c with added ROMSTAGE_CONST.
Change-Id: If872631ed96a79b9a0b15e09382d6f81098c8db3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8297
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: I655843c78d31cc69a007ddaf9b51cde063c48c79
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8299
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Add a function to retrieve the location of the CAR temporary memory
that was saved by the FSP into the HOB structure.
Change-Id: I2635de5207cd699740721d333a7706425b837651
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8194
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Status:
Tested with KFSN4-DRE PCB v1.04G
Booted Ubuntu Linux 14.04 and all onboard peripherals appear to work.
Dual Opteron 8347 CPUs tested with 8GB RAM (4GB per bank).
Dual Opteron 8356 CPUs tested with 1GB RAM in slot A1.
AMD PowerNow! functions correctly via ACPI.
Video, network, USB, SATA, and serial have received thorough testing.
Tested with KFSN4-DRE PCB v1.05G
Single Opteron 2419 CPU tested with 1GB RAM in slot A1.
Booted to PXE configuration menu; not tested further.
Known issues:
RAM initialization is a bit flaky with multiple high-density modules;
this could be a generic MCT training issue but is probably bad hardware.
The XGI Volari option ROM crashes SeaBIOS v1.7.5, but the video device
works after Linux boots and initializes the device.
Suspend/resume functions at the S1 level but sometimes hangs on resume.
Wake on LAN can be flaky; the strap(s) needed to have WoL work on power
application were not physically installed by ASUS so the board needs to
boot at least once after power application before it will work.
Change-Id: I0709f822eea8ed877f55db9443143028a5400472
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8270
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
This fixes the resource allocator locating the PCI register
space below 0xe0000000 thereby causing corruption with more
than ~3.5GB physical RAM on AMD Family 10h systems.
Change-Id: I66d1bfa1e977a6b492c1909079087a801c7e6a3a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8261
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I682e6c34d059ae21f9767302659bdfdbea86bcc8
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8285
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ic1b35b6bdd9c6d9ab672242e40b73aff1d626e81
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8273
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
|
|
Skeleton and ACPI generator interface taken from
model_fxx powernow_acpi.c
Small portions of FIDVID MSR code taken from
model_10xxx fidvid.c
Nearly completely rewritten for the P-state-based K10 CPU
TEST: KFSN4-DRE with dual Opteron 8356 CPUs
Verified CPU per-core dynamic state change with system load
Verified reported P-state count and frequencies
Stress-tested each CPU (all cores simultaneously) to verify
proper P0 transition and configuration.
Change-Id: Icf620ec96a3f163b62d96b5988184996641dd439
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8284
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
The build failure stems from a missing function being called via a chain
including setup_ss_table(), set_ht_link_ck804(), and
st_ht_link_buffer_counts_chain(); the latter function is only available
in the AMD K8 code.
It appears that a bunch of K8-specific code snuck into the CK804 and MCP55
southbridge code in GIT commit 968bbe89 and GIT commit d4b278c0.
Change-Id: I85d005edba44c503c49917d4b928e5c9c5900059
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8269
Tested-by: build bot (Jenkins)
Reviewed-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ie2937dd220464e3b168aa8a50a57c03b6258c189
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8283
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
Change-Id: Ic675911f534f07516c838b52c9463e89448d4353
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8291
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
On the ASUS KFSN4-DRE initializing CK804 0x78 causes an almost
immediate soft reset. Leaving the register at its power-on
default value appears to have no ill effect on that same board.
Change-Id: I833603adea580cb3f4441e35044d1e17d2d67852
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8272
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ie39652bded9a42d1d816ca5198db59a83e5c083a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8266
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Fix uninitialized variable when manual non-coherent BUID
selection is used.
Change-Id: Id19745b29486aef5297fdbb3324ae36bf9b8f466
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8267
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Fix three IASL warnings in ASL utility code by making the
methods `GWBM`, `GWEM` and `GIOR` serialized.
TEST: Built and booted on ASUS KFSN4-DRE.
Change-Id: Ia98088bea7e3e21c33252c98a675799d52edb809
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8264
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Remove declaration of unused variable `io`.
Change-Id: I750fc3a135f7634ad16c0f6a1a5bdb16ac702977
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/8265
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
|
