summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Expand)Author
2015-01-04AMD Mainboards - romstage.c: Fix doxygen errorsMartin Roth
2015-01-04AMD Mainboards - PlatformGnbPcie.c: Fix Doxygen errorsMartin Roth
2015-01-04AMD Mainboards - platform_cfg.h: Fixes for doxygenMartin Roth
2015-01-04smihandler.c: Fix doxygen errors in southbridge_smi_handlerMartin Roth
2015-01-04atomic.h: Fix doxygen errorsMartin Roth
2015-01-04remove vx900_int16 doxygen module/groupMartin Roth
2015-01-04superio/smsc/lpc47b272/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04src/superio/smsc/lpc47m10x/superio.c: Remove dead codeEdward O'Callaghan
2015-01-04superio/smsc/lpc47b272: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47m10x: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/smsc/lpc47b397: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87417: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc87366: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/nsc/pc97317: Use link-time symbols over .c inclusionEdward O'Callaghan
2015-01-04superio/intel/i3100: Use link-time symbol over .c includesEdward O'Callaghan
2015-01-04superio/nsc/pc87360: Use link-time symbol over .c includesEdward O'Callaghan
2015-01-04mainboard: Sanitize some superio include paths to be non-localEdward O'Callaghan
2015-01-04ipq806x: Fix casting in cbmem_top() so >=2GB can be usedDavid Hendricks
2015-01-04ipq806x: move GPIO definitions to the proper include fileVadim Bendebury
2015-01-04ipq806x: move translation table out of the wayVadim Bendebury
2015-01-04ipq806x: Add USB supportJulius Werner
2015-01-04nyan_big: Update Hynix BCTs and add Kingston 2GB BCT.Tom Warren
2015-01-04tegra124: configure DP with correct pixel clockVince Hsu
2015-01-04arm: lpae: Set XN and PXN bits for noncacheable regionsJimmy Zhang
2015-01-04nyan: Ignore the recovery GPIO.Todd Broch
2015-01-04samus: Minor fixes for P1.9 boardsDuncan Laurie
2015-01-04wtm2: Fix issues with USB in firmwareDuncan Laurie
2015-01-04samus: Enable DDI2 hotplugDuncan Laurie
2015-01-04samus: Update for board revision 1.9Duncan Laurie
2015-01-04samus: Move SPD related information to spd directoryDuncan Laurie
2015-01-04wtm2: Convert to use soc/intel/broadwellDuncan Laurie
2015-01-03intel/model_206ax: update microcodeNicolas Reinecke
2015-01-03ipq806x: clean up UART driver tx_byte functionVadim Bendebury
2015-01-03ARM64: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-03ARMv7: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-03storm: Put the page table at a correct addressVadim Bendebury
2015-01-03storm: modify memory layoutVadim Bendebury
2015-01-03mainboard/storm: setup mmu in storm mainboard_initDeepa Dinamani
2015-01-03soc/ipq806x : Add CONFIG_TTB_BUFFER for the soc.Deepa Dinamani
2015-01-03ipq8064: add SOC initialization skeletonVadim Bendebury
2015-01-03storm: enable early consoleVadim Bendebury
2015-01-03storm/ipq8064: add dynamic CBMEM supportVadim Bendebury
2015-01-03ipq8064: Configure storm bootblock to runVadim Bendebury
2015-01-03lenovo/t420s: Add new port.Nicolas Reinecke
2015-01-03blaze: change ramcode 1000/1001/1010 to use 792MHz bctNeil Chen
2015-01-03storm: ipq8064: enable CBFS SPI wrapperVadim Bendebury
2015-01-03ipq8084: provide monotonic us timerVadim Bendebury
2015-01-03arm: Fix stored PC value when handling exceptionsJulius Werner
2015-01-03elog: Add function to log boot reason in ChromeOS caseDavid Hendricks
2015-01-02allwinner/a10: Always has DYNAMIC_CBMEMKyösti Mälkki
2015-01-02Allow RISCV to be compiled with ANY_TOOLCHAINRonald G. Minnich
2015-01-01soc/riscv: Fix typo in src/soc/ucb/Makefile.inc.Ronald G. Minnich
2015-01-01ARM: Fix ARM_LPAE to not be selectable as a menu item.Ronald G. Minnich
2015-01-01mainboard/lenovo/t530/Kconfig: Enable VMX by defaultEdward O'Callaghan
2014-12-31samus: Combine mainboard patches to build soc/intel/broadwellDuncan Laurie
2014-12-31broadwell: Hook into the build systemDuncan Laurie
2014-12-31broadwell: Preparations for buildingMarc Jones
2014-12-31ipq8064: modify SPI controller driver to work in corebootVadim Bendebury
2014-12-31ipq8064/storm: UART enable and various fixesVadim Bendebury
2014-12-31vendorcode/amd/cimx/sbX00: Make SBPort.c filename consistentEdward O'Callaghan
2014-12-31arch/x86: Declare GDT symbols and move_gdt()Kyösti Mälkki
2014-12-31Fix Kconfig whitespaceKyösti Mälkki
2014-12-31baytrail: add more gpio init macrosKane Chen
2014-12-31nyan*: Set GEN2 I2C pads to open-drain modeKen Chang
2014-12-31Print segment clean up information only when required.Vadim Bendebury
2014-12-31rambi: Add _PRW for LID0 ACPI DeviceShawn Nematbakhsh
2014-12-31rambi: Unconditionally clear the EC recovery requestSheng-Liang Song
2014-12-30chromeos: Unconditionally clear the EC recovery requestSheng-Liang Song
2014-12-30vboot: Convert response_length from uint32_t to size_t in VbExTpmSendReceiveDaisuke Nojiri
2014-12-30Rambi: Set SOC_DISP_ON as GPIO to avoid LCD_VCC glitchKein Yuan
2014-12-30vboot: Add a new post code for TPM failureDuncan Laurie
2014-12-30elog: Use the RTC driver interface instead of reading CMOS directly.Gabe Black
2014-12-30rtc: Add an RTC driver for the AS3722 PMIC.Gabe Black
2014-12-30drivers/pc80/mc146818rtc: Assume we always have ALTCENTURYGabe Black
2014-12-30ipq8064: copy u-boot spi driver as isVadim Bendebury
2014-12-30nyan_blaze: Enable USB port2Neil Chen
2014-12-30tegra: i2c: Add a timeout to I2C bit clear recovery mechanismJulius Werner
2014-12-30i2c: Add software_i2c driver for I2C debugging and emulationJulius Werner
2014-12-30tegra124: Active dc/sor register change immediatelyVince Hsu
2014-12-30tegra124: display clock should be initialized before any accessVince Hsu
2014-12-30nyan*: Log boot reason in eventlogDavid Hendricks
2014-12-30nyan*: Add an empty elog functions for the !CONFIG_ELOG caseDavid Hendricks
2014-12-30ipq8064: prepare uart driver for use in corebootVadim Bendebury
2014-12-30ipq8064: prepare include files before adding UART driverVadim Bendebury
2014-12-30ipq8064: SOC UART driver belongs in the SOC directoryVadim Bendebury
2014-12-30ipq8064: make timer services availableMarc Jones
2014-12-30ipq/arm: Redesign hooks for bootblockVadim Bendebury
2014-12-30baytrail: Add defines and functions for GPNCOREKein Yuan
2014-12-30SPI: Add Eon EN25S64 support.Marc Jones
2014-12-30SPI: Fix Eon supportMarc Jones
2014-12-30drivers/spi: Prepare Spansion driver for use in CBFS wrapperVadim Bendebury
2014-12-30Provide a common CBFS wrapper for SPI storageVadim Bendebury
2014-12-30drivers/spi: add support for another Spansion chipVadim Bendebury
2014-12-30rtc: Add an RTC API, and implement it for x86.Marc Jones
2014-12-30cbmem: use a single id to name mapping tableVadim Bendebury
2014-12-30CBMEM: Always build for x86 romstageKyösti Mälkki
2014-12-30intel CAR: Fix DCACHE_RAM_BASE for old socketsKyösti Mälkki
2014-12-30Intel FSP: Fix GPI status outputKyösti Mälkki
2014-12-30mainboard/lenovo/t530/Kconfig: No Super I/O on this boardEdward O'Callaghan
2014-12-29edid: fill reserved bits fields in cb_framebufferPatrick Georgi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 17:15:10 +0000