summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-12-17src: Conditionally include TEVTFrans Hendriks
ACPI method TEVT is reported as unused by iASL (20190509) when ChromeEC support is not enabled. The message is “Method Argument is never used (Arg0)” on Method (TEVT, 1, NotSerialized), which indicates the TEVT method is empty. The solution is to only enable the TEVT code in mainboard or SoC when an EC is used that uses this event. The TEVT code in the EC is only enabled if the mainboard or SoC code implements TEVT. The TEVT method will be removed from the ASL code when the EC does not support TEVT. BUG=N/A TEST=Tested on facebook monolith. Change-Id: I8d2e14407ae2338e58797cdc7eb7d0cadf3cc26e Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-17src/mb/Kconfig: add BOARD_ROMSIZE_KB_5120Angel Pons
Mainboards exist with a 4+1 MiB flash chip combination. Change-Id: I214553a2c70e1a4a0e4d972fee5e524b609bb1e0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37729 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-17superio/aspeed/ast2400: Add AST2500 supportPatrick Rudolph
The AST2500 is similar to the AST2400, but it also supports ESPI mode. In ESPI mode the IRQ level must be 0 and UART3/UART4 aren't usable. Change-Id: Iea45740427ad56656040e6342f5316ec9d38122f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-17mb/google/rambi: add VBTs for variantsMatt DeVillier
Add VBTs for all rambi variants, extracted from VGA BIOS from stock firmware images using intelvbttool. Test: boot several rambi variants using MrChromebox edk2/master branch with Baytrail GOP driver and extracted VBTs. Change-Id: I401ae5accd852fc5211092a5944fc85871b642ae Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-17mb/google/jecht: Add VBTs for all variantsMatt DeVillier
Add VBTs for jecht variants, extracted from VGA BIOS from stock firmware images using intelvbttool, zero-padded to 0x11ff bytes to make the Intel BMP editor happy. Use a common VBT for all except tidus, since it differs from the others. Change-Id: I570bdb749ef7d49f41539074220bb16c9c100342 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-12-16src/soc/intel/cannonlake: Bump MAX_CPU from 8->12Edward O'Callaghan
This impacts boards: hatch (&variants) and drallion. Some variants like Puff can have up to 12 cores. coreboot should take the min() where MAX_CPU is the upper bound. Further to that, boards themseleves shouldn't be setting the MAX_CPUS, the chipset should be and so do that. BRANCH=none BUG=b:146255011 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: I284d027886f662ebb8414ea92540916ed19bc797 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-16biostar/am1ml: Switch away from ROMCC_BOOTBLOCKSergej Ivanov
Switching was done by moving a SIO configuration and a clocks setup from 'romstage.c' to 'bootblock.c' TEST=Boots into Ubuntu Linux 16.04.6 without a problem. Change-Id: I7a972b531183b08af7b325bd686cf3eb7558082f Signed-off-by: Sergej Ivanov <getinaks@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-16device/pnp: use correct width type for pnp_info.functionFelix Held
Change-Id: Idbc1b37a8c98fe7fa24d8632e6a55c046e2d2869 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37740 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-16device/pnp: introduce and use PNP_SKIP_FUNCTIONFelix Held
-1 shouldn't be assigned to an unsigned variable, so use an otherwise unused constant here. Since 7 is the highest virtual LDN number, using 0xffff as PNP_SKIP_FUNCTION marker has no unwanted side effects. Change-Id: I5e31e7ef9dad5fedfd5552963c298336c533a5e9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-16mb: Use fixed value in RcompTarget structureWim Vervoorn
Now RCOMP_TARGET_PARAMS is defined and used once in the definition of the RcompTarget structure. All other structures in these functions use a fixed value. Replace RCOMP_TARGET_PARAMS with fixed value. BUG=N/A TEST=build Change-Id: Ibe7c72c65975354433e9a0c613bda715eb782412 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37658 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16vendorcode/intel/fsp: Add Jasper Lake FSP headers for FSP v1433Aamir Bohra
The FSP-M/S/T headers added are generated as per FSP v1433. Change-Id: Iacb44204c3f7220a20ab3edc2163c97188014bbf Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37559 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16soc/intel/tigerlake: Add FSP header and Fsp.fd file path for Jasper LakeAamir Bohra
Change-Id: I66d48206a4c1c31802e85c08ab935f81f10aadbc Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37558 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-16superio/ite/it8728f: remove unused LDN selection register defineFelix Held
Change-Id: Ie7a8af46a59c36b0dd62f227a6b53918c8fde7b8 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37742 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16soc/amd,{agesa,pi}/hudson: Have do_board_reset in all stagesKyösti Mälkki
Change-Id: I38a721c359ab7761c5a3ea79da0c159fd7f58970 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37711 Reviewed-by: Mike Banon <mikebdp2@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16superio/ite: remove unused stdint.h include from header filesFelix Held
Change-Id: Ica1c9f0c92886a081ab69612174a8d1d467b0713 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37739 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-12-16mb/google/beltino: Add VBTs for all variantsMatt DeVillier
Add VBTs for beltino variants, extracted from VGA BIOS from stock firmware images using intelvbttool, zero-padded to 0x11ff bytes to make the Intel BMP editor happy. Use a common VBT for all except monroe, since it differs as it has a built-in display (being a Chromebase vs Chromebox). Change-Id: I82afb20a5648695c2cd568384a26839ab28be3da Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-16mb/google/slippy: Update VBT fileMatt DeVillier
Update VBT using file extracted from VGA BIOS from stock firmware image using intelvbttool, zero-padded to 0x11ff bytes to make the Intel BMP editor happy. Change-Id: I9f53e80305ec8de78a3d5c930224b394b5c8618a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37732 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16mb/google/auron: add VBTs for variantsMatt DeVillier
Add VBTs for all auron variants, extracted from VGA BIOS from stock firmware images using intelvbttool, zero-padded to 0x11ff bytes to make the Intel BMP editor happy. Test: boot several auron variants with libgfxinit and Tianocore payload, ensure both internal and external displays as well as HDMI audio function properly under Linux (4.x/5.x). Change-Id: Ibc4eabfa5d02b4c08755cf52835b5df8c1291fea Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37714 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-16ec/google/chromeec/acpi: move PS2K under PCI0Matt DeVillier
Commit 77ad581ce [chromeec: PS2K node can't be under SIO node] moved the PS2K ACPI device from under the SIO device to under the LPCB, and while this fixed the keyboard under Windows for Skylake devices, it was insufficient for Baytrail and Braswell devices (and likely Apollo Lake/Gemini Lake too). Moving the PS2K device under PCI0 allows the PS2K to be functional under Windows for all Chrome-EC platforms. Test: build/boot various Chrome-EC devices from IVB, HSW, BDW, BYT, SKL, BSW, and KBL platforms, verify keyboard functional under both Linux (4.x and 5.x) and Windows 10. Change-Id: If773eea69dc46030b6db9d64c3855be49951d4c0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37542 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-163rdparty/fsp: Update to current master againNico Huber
We had to role the `fsp` submodule back for a minute due to a regression with the Coffee Lake binary. Intel silently mixed FSP 2.1 features into the Coffee Lake FSP which is supposed to be FSP 2.0. With the stack and heap usage partitioned for FSP using coreboot's stack (config FSP_USES_ CB_STACK), it works again. To make this even messier: We already selected this Kconfig option for Whiskey Lake, which is supposed to use the very same FSP binary. So with either submodule pointer, something was always broken :-/ Change-Id: Id2aa17aaa2c843dcc7e0fb28779d1e5948da83c9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Mimoja <coreboot@mimoja.de>
2019-12-16arch/x86: Make X86 stages select ARCH_X86Arthur Heymans
Also, don't define the default as this results in spurious lines in the .config. TEST: Build all boards with where config.h differed with BUILD_TIMELESS=1 and remained the same Change-Id: Ic77b696f493d7648f317f0ba0a27fdee5212961e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31316 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16drivers/intel/fsp1_1: Drop unused functionArthur Heymans
Change-Id: Ide336fb900360c446bffcc5ca31bf51e7746cae1 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-16sc7180: clock: Add support for QUP DFSR configurationTaniya Das
Support configuring the qup dfsr registers. Tested: validated DFSR clock configuration and M/N/D values. Change-Id: I146ac7c2197606965265f2a770769312af76041e Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-16soc/intel/common/block/chip/Kconfig: Fix minor whitespaceHimanshu Sahdev aka CunningLearner
Change-Id: I662420e6e05a6489950c583dfd37df5826153214 Signed-off-by: Himanshu Sahdev aka CunningLearner <sahdev.himan@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35291 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: RONAK KANABAR <ronak199323@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-16mb/facebook/monolith: Add vboot-ro.fmd to support measured bootWim Vervoorn
Add an fmd file with a layout that allows configuring the system for measured boot without enabling verified boot. BUG=N/A TEST=tested on facebook monolith Change-Id: I85fc6bee3f28fa4454d43df0e8bd1e511e1d0caf Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37673 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-16mb/facebook/monolith: Remove % tag from fmd fileWim Vervoorn
cbfstool doesn't support % tag yet while this was in the fmd. Revert the fmd changes that use the % tag. BUG=N/A TEST=build Change-Id: I2dc8b8f56ee0890e01be3bed939ed922feb15e89 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-16mb/facebook/monolith/gpio.h: Update GPIO configurationWim Vervoorn
Update signal names and GPIO configuration. Remove unused GPE_EC_WAKE and EC_XXX_GPI defines. BUG=N/A TEST=tested on facebook monolith Change-Id: Iae5edb8418894a669ed49c2d78672d8957010f3c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-16soc/intel/tigerlake: Pick correct pmc base reg from pch typeMaulik V Vaghela
Update PMC shadow register base address for Jasperlake Correct PCH detection logic based on PCH ids and return correct base address based on PCH detected since our code supports both tgl and jsl. Change-Id: Iea3311b3dc8dc3ee5ea54db1148f386c2a5dd563 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-12-16mb/g/drallion: Remove Wilco 1.0 CML variants from drallion codeMike Wiitala
Remove the sarien_cml and arcada_cml subdirectories from the drallion/variants directory. BUG=b:140068267 TEST=./build_packages --board=drallion Confirm that drallion still builds successfully. BRANCH=none Change-Id: I9648965ca222d4d68bf73738716ad1c93739b03f Signed-off-by: Mike Wiitala <mwiitala@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-15AGESA: Disable boards from buildKyösti Mälkki
As per the 4.11 release requirement, C_ENVIRONMENT_BOOTBLOCK=y is a mandatory feature, which most AGESA and binaryPI boards lack. Disable such platforms from the build for the time being. The Kconfig symbol has been flipped, ROMCC_BOOTBLOCK=n is the same mandated feature as C_ENVIRONMENT_BOOTBLOCK=y. If a platform does not reach ROMCC_BOOTBLOCK=n within a reasonable timeframe both the mainboard and the respective unused platform support code will get removed. Change-Id: I7fceb0370f7f4f5f52080277c5d21615d3ab3454 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-12-15drivers/mrc_cache: Redo indentingMarshall Dawson
Indent continuation lines of an if test farther than its "true" expression to be executed. Change-Id: I3dfa4049761095dcbb6797f1533d6a513e3b503c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-15asus/f2a85-m: switch away from ROMCC_BOOTBLOCKIdwer Vollering
Change-Id: I1d7127e2f9bd5bd9677feb2b0e686a854c4e3885 Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37727 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-15mb/msi/ms7721: Don't rewrite pnp_{enter,exit}_conf_state functionElyes HAOUAS
Change-Id: Ib27c518fb5ce99e17be25b974ff5adc8c6b3f3a6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37570 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-15mb/roda/rk886ex: Don't rewrite pnp_{enter,exit}_conf_state functionElyes HAOUAS
Change-Id: Ie9918e5114bb880e37680a85eab2bd224b0b082c Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-15mainboard/google/puff: Toggle on DqPinsInterleavedEdward O'Callaghan
BRANCH=none BUG=b:146172098 TEST=./util/abuild/abuild -p none -t google/hatch -x -a Change-Id: Ib2da3baace9255ef25c0f03390a064fd77ef9ae5 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2019-12-14Revert "{northbridge,soc,southbridge}: Don't use both of _ADR and _HID"Nico Huber
This reverts commit 01787608670adec26fcea48173e18395e51c790e. AMD: Dropping the _HID of PCI root bus doesn't work well and people started to notice the breakage. Intel: These platforms have a devicetree switch to choose between PCI and ACPI modes. In the former case we need _ADR, but in the latter _HID as the PCI devices are hidden. The conflicting use of _ADR and _HID still needs to be fixed before we can bump our IASL version. Change-Id: If7b52b9e8f2f53574849aa3fddfccfa016288179 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37710 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-14sb/intel/*: Remove romcc guardsArthur Heymans
These platforms now use a GCC compiled bootblock. Change-Id: I9a0139f497fe84860664195ed6584f90daecec16 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-14bootblock: Provide some common prototypesKyösti Mälkki
The split of bootblock initialisation to cpu, northbridge and southbridge is not specific to intel at all, create new header <arch/bootblock.h> as AMD will want some of these too. Change-Id: I702cc6bad4afee4f61acf58b9155608b28eb417e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37429 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-14asrock/e350m1: Switch away from ROMCC_BOOTBLOCKDenis 'GNUtoo' Carikli
Change-Id: Ie14db10b6a72e19ac67254ca8f95bcf6ac8af8d3 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37703 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-12-13security/vboot: Ensure firmware body size is respected againJulius Werner
CB:36845 simplified how coreboot finds the RW CBFS after vboot has and eliminated a layer of caching. Unfortunately, we missed the fact that the former cached value didn't exactly match the FMAP section... it was in fact truncated to the data actually used by vboot. That patch unintentionally broke this truncation which leads to performance regressions on certain CBFS accesses. This patch makes use of a new API function added to vboot (CL:1965920) which we can use to retrieve the real firmware body length as before. (Also stop making all the vb2_context pointers const. vboot generally never marks context pointers as const in its API functions, even when the function doesn't modify the context. Therefore constifying it inside coreboot just makes things weird because it prevents you from calling random API functions for no reason. If we really want const context pointers, that's a refactoring that would have to start inside vboot first.) This patch brings in upstream vboot commit 4b0408d2: 2019-12-12 Julius Werner 2lib: Move firmware body size reporting to separate function Change-Id: I167cd40cb435dbae7f09d6069c9f1ffc1d99fe13 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37680 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mathew King <mathewk@chromium.org>
2019-12-13soc/intel/common: Add PCI device IDs for CMP-HGaggery Tsai
This patch adds PCI device IDs for CMP-H. TEST=build coreboot.rom and boot to the OS Change-Id: Ia7413f75757c64b389a39d6e171f88eb61036c58 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37536 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-12-13superio/*: Don't use conf_mode directlyPatrick Rudolph
Use the functions defined in device/pnp.h instead of using the conf_mode directly. This will make future refactoring easier. Change-Id: Ibb94d86b3ee861f44cded469ff58b545dd7311fd Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-13gizmosphere/gizmo: Switch away from ROMCC_BOOTBLOCKKyösti Mälkki
No special treatment required for bootblock. Change-Id: I1a08d4da94ab34bf62fbfdd2cb66f2b44a847916 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37452 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-13pcengines/apu1: Switch away from ROMCC_BOOTBLOCKMichał Żygowski
TEST=boot PC Engines apu1 with C bootblock patch and launch Debian with Linux kernel 4.14.50 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I36af6d3871a57f462a7508745663d9759de1c47d Reviewed-on: https://review.coreboot.org/c/coreboot/+/37332 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-13sb/amd/cimx/sb800: Postpone Sb_Poweron_Init() callKyösti Mälkki
With LPC decode enables explicitly set in C env bootblock, this call can be delayed to happen before AMD_INIT_RESET. Change-Id: I3a28eaa2cf70b770b022760a2380ded0f43e9a6f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-12vboot: update secdata naming schemeJoel Kitching
secdata -> secdata_firmware secdatak -> secdata_kernel BUG=b:124141368, chromium:972956 TEST=make clean && make test-abuild BRANCH=none Change-Id: Ie2051de51c8f483a8921831385557fad816eb9fb Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-12vc/amd/pi: Fix typoPatrick Georgi
Change-Id: Ic3d1b9f90c6ed3d85ff209f433de9ab939d760a6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37676 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/google/nocturne: adjust VBT boot resolutionMatt DeVillier
On nocturne, the VBT specifies that the native panel resolution (3000x2000) is to be used by FSP/GOP init, which makes payload and grub menus extremely difficult to read. Change the default POST resolution specified by the VBT to 1500x1000 instead (200% scaling) which is much more legible. Test: build/boot nocturne with GOP init and Tianocore payload, observe menu text is actually readable. Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: I767a2b8319c7673e3460acfad534140409bf1d57 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37621 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12AGESA, binaryPI: Remove generic device for SPD eepromsKyösti Mälkki
These entries have no functional purpose, followup work will disallow chip entries that do not link in the respective driver. Change-Id: Ieab695022d0dd2f2671f9058db97bdd6fb29a10d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-12nb/{haswell,i945,sandybridge}: Drop outdated commentElyes HAOUAS
'e7525/northbridge.c' does not exist anymore. Change-Id: I5520760f59a3c6f89afb1360b12bd9763fba562a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37653 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Mimoja <coreboot@mimoja.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/google/hatch/variant/akemi: Increase Goodix touch screen reset delay timePeichao Wang
Confirmed with Goodix team, so increase reset delay time from 120ms to 150ms. BUG=b:144267684 TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I4ff95ac89314fc031620ca28e4f6e6e26cdef3f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37544 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12soc/mediatek/mt8183: skip fast calibration for high frequency of TX RX windowHuayang Duan
For low frequency (e.g., 1600 or 2400 Mbps) we can do fast calibration for TX and RX window. However, for high frequency (e.g., 3200 or 3600 Mbps) a full calibration is needed. BUG=b:80501386,b:142358843 BRANCH=kukui TEST=Boots correctly on Kukui Signed-off-by: Huayang Duan <huayang.duan@mediatek.com> Change-Id: I00d563ece4cf91ef5e8e12b6cf7f777849375a24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36921 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/google/hatch: Add new SKU ID 3 and 4Peichao Wang
1. SKU ID 1 and 3 for eMMC 2. SKU ID 2 and 4 for SSD BUG=b:144815890 BRANCH=firmware-hatch-12672.B TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-bootimage Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: I25f0c4142be024ba55f671491601d1f6ec26d68a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37498 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Philip Chen <philipchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12mb/**/hda_verb.c: Clean up formattingAngel Pons
Change-Id: Ibe2d92990d0074266aa05ada749e9dad55e609a2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-12soc/intel/{cnl,icl,skl,tgl}: Remove unused gpe0_en_* from chip.hFurquan Shaikh
gpe0_en_* seem to have been copied over from previous generations but recent SoCs don't use it. This change gets rid of these unused members. Change-Id: I165e66aeefde4efea4484f588c774795987ca461 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37659 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-12-12acpigen: Add methods for mutex operationsPatrick Rudolph
Tested on Linux 5.2: Dumped and decoded the ACPI tables using iasl. Change-Id: I79310b0f9e2297cf8428d11598935164caf95968 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-12-12drivers/aspeed: Add AST2500 supportPatrick Rudolph
Tested on AST2500. Code for AST2400 still works. Copy code from GNU/Linux kernel to coreboot to add AST2500 support. Change-Id: I25bd34dd52a0acd3e04fc5818e011215ef907fad Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-12-12drivers/aspeed/common: Add support for high resolution framebufferPatrick Rudolph
* Implement reading EDID over software I2C. * Fall back to VGA if no monitor connected for BMC KVM * Copy the linux kernel code and add a bunch of wrapper structs to make it compile. * Convert the EDID to a drm_display_mode, which is understood by the driver. * Properly select HAVE_LINEAR_FRAMEBUFFER and HAVE_VGA_TEXT_FRAMEBUFFER Tested on Supermicro X11SSH-TF using FullHD VGA monitor. Initializes the graphics in about 1 second, which is twice as fast as the VGA Option ROM. The framebuffer is advertised and working in tianocore. Change-Id: I7803566b64158405efc04a39f80a0ec98b44e646 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35726 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12superio/common/generic: Assign resources behind deviceChristian Walter
If multiple devices are behind a dev, we would only recognise port 0. We need to scan the complete 'bus'. Tested on ASpeed AST2500 Change-Id: Id80a2ae6e82c151b8d8adc9c5f35f38362d538fa Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37607 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12hp/pavilion_m6_1035dx: Switch away from ROMCC_BOOTBLOCKKyösti Mälkki
No special treatment required for bootblock. Change-Id: I0036614579045b62829577bb2ae94266b2d62310 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37500 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12lenovo/g505s: Switch away from ROMCC_BOOTBLOCKKyösti Mälkki
No special treatment required for bootblock. Change-Id: Icb673bba1ba210a077e9569de70b6c4f3cbd1e6b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37499 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-12asrock/imb-a180: Switch away from ROMCC_BOOTBLOCKKyösti Mälkki
Change-Id: I603e6c83d72cf6c1d8f8c6eef652fdf954a3a284 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37453 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11pcengines/apu2: Switch away from ROMCC_BOOTBLOCKKyösti Mälkki
Add early SuperIO initialization in bootblock to enable early console. Also, remove some southbridge-specific initialization that has been moved to southbridge bootblock initialization in previous patch. The board obtains few additional timestamps: start of bootblock, end of bootblock, starting to load romstage and finished loading romstage. TEST=boot apu2 and launch Debian with Linux kernel 4.14.50 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: If770eff467b9a71d21eeb0963b6c3ebe72a88ef3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/36915 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11AGESA, binaryPI: implement C bootblockMichał Żygowski
Modify CAR setup to work in bootblock. Provide bootblock C file with necessary C bootblock functions. Additionally chache the ROM and set the MMCONF base before jumping to bootblock main. Change-Id: I29916a96f490ff717c69dc7cd565d74a83dbfb0d Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36914 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/lenovo/t410: Select ricoh driverPatrick Rudolph
Fix for CB:35086. Build the Ricoh SDcard driver that is defined in devicetree. Change-Id: Ib0ac3da088d798c35e2c5ea045ea721c89d9e12f Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37625 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/{facebook/portwell}: Remove empty onboard.hFrans Hendriks
Defines in onboard.h are moved to other files. Remove this empty and unused file. BUG=N/A TEST=build Change-Id: Ide10b352eadcffad2d4221865124f64466af5a1c Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37615 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/facebook/fbg1701: Move verified items to board_verified_boot.hFrans Hendriks
Items in onboard.h are related to verified or measured boot. Move the items to board_verified_boot.h and remove onboard.h. BUG=N/A TEST=build Change-Id: Icfc8d6d8351f0654c277e81c7f3cc2b0a947866a Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37614 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11fmap: Make FMAP_CACHE mandatory if it is configured inJulius Werner
Now that we have a CONFIG_NO_FMAP_CACHE to completely configure out the pre-RAM FMAP cache code, there's no point in allowing the region to be optional anymore. This patch makes the section required by the linker. If a board doesn't want to provide it, it has to select NO_FMAP_CACHE. Adding FMAP_CACHE regions to a couple more targets that I think can use them but I don't know anything about... please yell if one of these is a bad idea and I should mark them NO_FMAP_CACHE instead. Change-Id: Ic7d47772ab3abfa7e3a66815c3739d0af071abc2 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-12-11mb/amd/padmelon: Use Prairie Falcon configurationRichard Spiegel
While Merlin Falcon binaries are not available, make it explicit that it's compiling for Prairie Falcon (it was being surreptitious about it). Board Padmelon accepts 3 different SOC, just changing some resistors (soldered or not): Brown Falcon, Prairie Falcon and Merlin Falcon. Code for Brown Falcon is not currently available. BUG=None TEST=Build with prairie falcon. Change-Id: I1663e4403a32a7d626dd2fa06763f18f4230457e Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2019-12-11soc/amd/stoneyridge|mbs: Deprecate SOC_AMD_NAME_PKG and othersMarshall Dawson
Add package and APU selections to mainboards and remove symbols no longer used in soc//stoneyridge. Change-Id: I60214b6557bef50358f9ec8f9fcdb7265e04663b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37225 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11soc/amd/stoneyridge|mbs: Define SOC_AMD_STONEYRIDGE symbolMarshall Dawson
Make a new Kconfig symbol for using soc//stoneyridge. This code also supports Prairie Falcon is backward-compatible with Carrizo and Merlin Falcon. Although Bettong uses Carrizo, it does not currently rely on stoneyridge source, so it is unaffected by this change. Change-Id: I786ca54b0444cbcf36dc428a193006797b01fc09 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11soc/amd/stoneyridge|mb: Add Kconfig symbol for Prairie FalconMarshall Dawson
The stoneyridge code inferred that if Merlin Falcon was built but no Merlin Falcon binaries were present, the intent must be Prairie Falcon. The two falcons are Embedded variants, and Prairie Falcon falls within Family 15h Models 70h-7Fh. Add a Prairie Falcon symbol that can be used explicitely. Drop HAVE_MERLINFALCON_BINARIES. Change-Id: I0d3a1bc302760c18c8fe3d57c955e2bb3bd8153a Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11soc/amd/stoneyridge|vc: Change default locations for blobsMarshall Dawson
Set the default location strings to point to the 3rdparty/amd_blobs files. Change-Id: I5426b8de2501ba55843efc1cda4b03bc3768f8cb Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11vc/amd/pi: Allow 00670F00 to build with no binaryPIMarshall Dawson
Make the default binaryPI image strings for all stoneyridge-based APUs depend on USE_AMD_BLOBS. Ensure the build completes without names, and without images. Change-Id: I74a38efa2a4ad2f9f12a1f8e7fb8694d0ab9dd1e Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2019-12-11mb/**/hda_verb.c: use denary numerals for lengthsAngel Pons
Denary, also known as "decimal" or "base 10," is the standard number system used around the world. Therefore, make use of it. Change-Id: Ia22705d7629a322292cfd557add9cfadc649c16c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37537 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11drivers/i2c/rt5663/: fix missing header includeMatt DeVillier
'struct acpi_gpio' and 'struct acpi_irq' require the inclusion of acpi_device.h. The only reason this wasn't caught previously is due to the header being included with another driver compiled first on the one board using it (google/eve). Change-Id: I987f0ec6f769e550f3421629e0ef0c579a3d12f9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37539 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11printf: Automatically prefix %p with 0xJulius Werner
According to the POSIX standard, %p is supposed to print a pointer "as if by %#x", meaning the "0x" prefix should automatically be prepended. All other implementations out there (glibc, Linux, even libpayload) do this, so we should make coreboot match. This patch changes vtxprintf() accordingly and removes any explicit instances of "0x%p" from existing format strings. How to handle zero padding is less clear: the official POSIX definition above technically says there should be no automatic zero padding, but in practice most other implementations seem to do it and I assume most programmers would prefer it. The way chosen here is to always zero-pad to 32 bits, even on a 64-bit system. The rationale for this is that even on 64-bit systems, coreboot always avoids using any memory above 4GB for itself, so in practice all pointers should fit in that range and padding everything to 64 bits would just hurt readability. Padding it this way also helps pointers that do exceed 4GB (e.g. prints from MMU config on some arm64 systems) stand out better from the others. Change-Id: I0171b52f7288abb40e3fc3c8b874aee14b9bdcd6 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2019-12-11soc/intel/tigerlake: Include soc common lpss header fileAamir Bohra
Include soc common lpss header file to resolve build error due to missing soc_lpss_controllers_list declaration. Also remove console header since it is unused. Change-Id: I2b2c82fc7592120993bc483d3061803cf75c7335 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37556 Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11soc/intel/tigerlake: add soc implementation for ETR address APIAamir Bohra
Add soc_pmc_etr_addr function definition in tigerlake SOC code. The function is declared in common soc intel pmc driver. Change-Id: Icc471b16304c72a9341abdd9797ba3f8d0d3d1bc Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37555 Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11soc/intel/Kconfig: Load Tiger Lake SOC KconfigAamir Bohra
Change-Id: I25463f1b7b5d8242da3decf3e7a7ca54c699d467 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37554 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/portwell/m107/fadt.c Use get_apic_table_revisionFrans Hendriks
Fixed value of ACPI_FADT_REV_ACPI_2_0 is replaced by get_acpi_table_revision(). BUG=N/A TEST=build Change-Id: I95b0d886b73f94bc880c0e3e7d512211d2d33e21 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-11mb/goog/hatch/var/dratini: Tune i2c frequency to 400 KHzWisley Chen
Tuning i2c frequency for dratini: I2C0: 396 KHz I2C1: 398 KHz I2C3: unused I2C4: 394 KHz BUG=b:145891557 BRANCH=hatch TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I1431554fbce5f3ce113ef1a934e39448e7ba321c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37605 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-11mb/portwell/m107/acpi/superio.asl: Correct indentFrans Hendriks
Remove the additional tabs on all lines. BUG=N/A TEST=build Change-Id: I02b1314fe2ae89da3659b198c12df9c30c8a039d Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-11mb/{facebook/portwell}: Define SDCARD_CD in dsdt.aslFrans Hendriks
SDCARD_CD is defined in onboard.h but required in ASL only, move this define to dsdt.asl. Removed the onboard.h file from the ASL files that don use it. BUG=N/A TEST=build Change-Id: I35b75e0ae2e2bc4ce143aaec6df6016774676095 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-11mb/facebook/fbg1701/acpi/ec.asl: Remove headerFrans Hendriks
File contains header only. Remove header leaving an empty file. BUG=N/A TEST=build Change-Id: I8b1c6b38bd7936cc7af11c13744325bed23a6e83 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-11mb/portwell/m107/devicetree.cb: Use IGD_MEMSIZE_32MBFrans Hendriks
Make code more readable. Replace 1 by IGD_MEMSIZE_32MB for PcdIgdDvmtS0PreAlloc. BUG=N/A TEST=build Change-Id: I5d84e575935e9e60610e1805e1402f290672b114 Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-11mb/google/drallion/variants/drallion: Update thermal configuration for DPTFJohn Su
Follow thermal table for first tuning. BUG=b:144464314 TEST=Built and tested on drallion Change-Id: I4546622cdc6efb2bf2eb973cfc5c6f22c40cc6ef Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36860 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-10mb/google/daisy: Move 'PMIC_BUS' to KconfigElyes HAOUAS
Change-Id: If40fa38e5b249452a6dacf4a4045b6bd00c27cfa Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-10vboot: remove old vboot_fill_handoff function headerJoel Kitching
This function was removed in CB:33535. BUG=b:124141368 TEST=make clean && make runtests BRANCH=none Change-Id: Ifded75319c92dcbb4befbb3fbecc1cd2df8a9ad0 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-12-10mb/{facebook/portwell}: Remove ITE8258_CMD_PORTFrans Hendriks
ITE8258_CMD_PORT is used in com_init.c only. Replace ITE8258_CMD_PORT by fixed value in the c file. ITE8258_DATA_PORT is removed as this isn't used. BUG=N/A TEST=build Change-Id: I401da3f127db9e65763fd8d115eb274fbadbefbe Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37609 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2019-12-10soc/intel/common: Add Jasperlake Device IDsrkanabar
Add Jasperlake SA and PCH IDs Change-Id: I2c9ec1ee4236184b986d99250f263172c80f7117 Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-12-10amdblocks/pci: add common implementation of MMCONF enablingMichał Żygowski
Add common function to enable PCI MMCONF base address. Use the common function in stoneyridge bootblock. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I1bb8b22b282584c421a9fffa3322b2a8e406d037 Reviewed-on: https://review.coreboot.org/c/coreboot/+/37552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-12-10sb/amd/{agesa,pi}/hudson: Explicitly enable LPC controllerKyösti Mälkki
Location in hudson_lpc_port80() was called conditionally. Also move hudson_lpc_decode() call after enable_acpimmio_decode_pmXX() due the change from IO to MMIO using pm_read/write. Change-Id: I38e94e4b04f0a493052cfd3ffdd0a9c2ac0d07fc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-10mb/google/kohaku: Update TCC offset settingSeunghwan Kim
This change sets TCC offset to 10 for kohaku. BUG=b:144532818 BRANCH=firmware-hatch-12672.B TEST=Checked thermal and performance efficiency internally (b:144532818) Change-Id: Ia4b53de3a53bc39c1cd0f7626ae23d4c11a7a3db Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37587 Reviewed-by: Kane Chen <kane.chen@intel.com> Reviewed-by: Grace Kao <grace.kao@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-10mainboard/(i945,ich7): Remove commented RCBA32(0x341c) codeElyes HAOUAS
PCIe root port clock gate is already enabled at i945/early_init.c Also fix comments when only PCIe root port is enabled. Change-Id: Ica38529dbdd5cc51b19b426999a1d9f0b678b4f5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37576 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-10include/device/pci_ids: Add Coffeelake U IGD P630Christian Walter
Change-Id: Ifdb9943e6362b7f29c2079759ea09d7b3a940993 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37608 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-09Kconfig: Drop NO_RELOCATABLE_RAMSTAGENico Huber
It's not selected anywhere anymore. Drop it and set the default for RELOCATABLE_RAMSTAGE directly. Change-Id: I580e89525ece39418afeefd6a9d0b89b370ca95f Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37577 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-09binaryPI boards: Bulk remove BINARYPI_LEGACY_WRAPPER remainsKyösti Mälkki
These boards currently have no build-testing, so they degrade fast. Apply some of the build-tested changes we know to be good from pcengines/apu2 to get them a bit closer to using POSTCAR_STAGE=y. Change-Id: Ibc9a15ed5e91c6dd857f2dd02e37d0979dd6ae90 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
2019-12-09mb/lenovo/w530/devicetree: Use subsystemid inheritancePeter Lemenkov
Change-Id: I0646b18e823c52109e0fb62c85726622156172b9 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37385 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-12-09mb/lenovo/s230u/devicetree: Use subsystemid inheritancePeter Lemenkov
Change-Id: I70eabc0b03709409d997ccbe8b8e257d68aec338 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>