| Age | Commit message (Collapse) | Author |
|---|
|
The codec interrupt needs to come from codec GPIO1, so use the
HOTWORD_DET GPIO as the codec IRQ and the DSP_INT as the wake.The
This means codec interrupt is GPIO46 which is PIRQO and should be
interrupt 30.
Also add GPIO defines for the GPIOs attached to the codec itself.
These are defined by index, and I used the same "jack detect" and
"mic present" indices that were used in baytrail.
The codec interrupt to the host is added at index 2 and the
hostword detect interrupt to the host is added at index 3.
These can be changed as we work through the implementation in the
kernel driver.
BUG=chrome-os-partner:29649
BRANCH=samus
TEST=build and boot on samus
Change-Id: Id9cb083ddf9df161be314da4148740ed9f4d0fe6
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 3958efb28813c664a8a4219f78bdd0fcfe75c706
Original-Change-Id: I1c1ac1b6095fab7e3f4412555db4f9a9138e528b
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220326
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9216
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The EC behavior for reading events from the ACPI interface was broken
with this commit:
d899fda lpc: ACPI query-next-event drops masked events
https://chromium-review.googlesource.com/194935
This is causing no EC wake events to be logged. To make sure they are
logged once again set the wake mask before querying for events.
Also remove the check for port80 event logging since this is no longer
used as we now store the port80 code in CMOS and this is unnecessary
commands to do for the resume path.
BUG=chrome-os-partner:32462
BRANCH=samus,auron
TEST=build and boot on samus, check for EC wake events for keyboard
and lid in the event log.
Change-Id: Ib46fc00006ff0e5777941fc3ab1d81607359c4cb
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b4dccc03bdded8411cc1429521579ea006ec58a7
Original-Change-Id: Icdd0c1a37a94e0cbd9fd256172324bf989e6d0dc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220373
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9215
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Move _PRW to the ACPI devices for the touchpad and touchscreen.
Add a _DSW method, but disable it by default for now until a
spurious wake issue can be resolved.
BUG=chrome-os-partner:32232
BRANCH=samus
TEST=build and boot on samus, ensure trackpad does not
spuriously wake the system.
Change-Id: I3160248ef6dfeccdec765553643d9b8de2bb2ed1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 85d14842aefdb29c750009c0092f055587172dac
Original-Change-Id: Ic4763f2cb5f3a59d04b236cee94906025661c615
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220325
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9214
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add event log entry if GPIO27 is used to wake the system.
This GPIO is treated separately from other GPE and it is
one of the only events that can wake from Deep Sx.
BUG=chrome-os-partner:31549
BRANCH=samus
TEST=samus: suspend/resume and wake from keypress, check for
GPIO27 event in event log.
Change-Id: If699640701b0afcd0843c2a99546ee6bb9d09361
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0f1cccfd00552dafbaa91acc362b5e35474c3a95
Original-Change-Id: I38a44a62f68288a4ae3f97fe078ca222fd01390a
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220323
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9213
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The ARM SMP feature was added a long time ago and has never really been
used by anyone since. We are still always compiling cpu_info() even
though we don't use it, and it makes some dangerous assumptions about
stack alignment that are not guaranteed anywhere.
I'm planning to change the way the stack boundaries are defined. Rather
than trying to work that into this unsafe, unused and hard to test
feature, I think we should just seal it off with police tape and make
sure that if anyone ever tries to use it again (which currently seems
unlikely), they get forced to do their due diligence on making sure it
works as intended.
BUG=None
TEST=Compiled Veyron_Pinky.
Change-Id: Id25545cab88f29200c7672ef02c7804f0ac26399
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 5b517fc46b030a6e50ef2f5e4d4a449b98ce16c6
Original-Change-Id: I8a60bd30e8b27a22bb3da68ca84daea99424dee9
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219680
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9222
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Need END tag, "REG_SCRIPT_END", to indicate the end of smbus_init_script.
BUG=chromium:416651
TEST=test on Auron.
Change-Id: Ieeaf6c705aa673acc9bb2635e103c4148bc8742f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 172c5fc259a2f6d09daccb1fe53fe0aa7c5601e1
Original-Change-Id: I1f5624f4c6ce7f0e8ceb8971aaa595d99e9ff82e
Original-Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220934
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9221
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
- Define specific GPIOs in gpio.h instaed of smihandler.c
- Add battery status event to SCI list
- Remove old proto board version defines and SPD index usage
- Do not disable cmd_pwr training now that it works on EVT board
BUG=chrome-os-partner:32196,chrome-os-partner:29117
BRANCH=samus
TEST=build and boot on samus
Change-Id: I50f1599aa4266ed61749cc7f4229a9384b498df2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 0e3ebcb8659c92874d3ca89fa3a6795c9b6eebfa
Original-Change-Id: I53cf8d80ed7f675c10fa04e8fe8b879a4af9b21f
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220321
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9220
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Add a new host event to send a notify(0x80) to the battery
when the EC indicates that battery status has changed.
The kernel has fixed the bug with _BIX method so it can
be enabled now.
BUG=chrome-os-partner:32196
BRANCH=samus
TEST=build and boot on samus
Change-Id: I1b8068df7abf1c8ebdc3a89602896b863accb7f3
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a779fc7f32729adb60d8bc220325444ebc20e0d2
Original-Change-Id: I0ebb17e5441e875875d98168ce3c31486d57330e
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220320
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9212
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Set Root Port 0 PCI CFG Offset 0xE2[5:4] before ASPM configuration.
BUG=chrome-os-partner:31424
TEST=Build an image, and check the procedure and recommended setting
is applied correctly.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I94820787d4ed4a6bf8db8898b7de14467c9d6630
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 24bdea6cd67d5657b94058233cd26130f68c44e4
Original-Change-Id: I98713f615885ac02867942ece2be1cea8ce04ab2
Original-Reviewed-on: https://chromium-review.googlesource.com/219994
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9211
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
OBFF: Disable it by clearing bit fields in that W/O register.
RO: Enable Relaxed Ordering from each enabled Root Port.
Linker Arbiter: Set it to recommended setting.
BUG=None
TEST=Build an image and check the setting are applied correctly on
Samus.
Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I7a72217729d6f6ff5320738245c380c887c5912f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 465b0a37c381930a4f0d74cd4fd69503a082911b
Original-Change-Id: I284e9eba1c2fceb690d3ef48b45a6f36d07ff84c
Original-Reviewed-on: https://chromium-review.googlesource.com/219993
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Reviewed-on: http://review.coreboot.org/9210
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Extended PCIe Capability and Advanced Error Report locates at
offset 0x100 is W/O, and the subsequent write following the 1st
write to the register takes no effect.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d2862b6c1ccc77845cb3e08688a72c0655ea79c9
Original-BUG=chrome-os-partner:31424.
Original-TEST=Build a image and check the programming value is correct on
Original-Samus.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I0bed30f516ee0307b4a86cad2f669a18ff4994db
Original-Reviewed-on: https://chromium-review.googlesource.com/219985
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: I3711aa0f1f918baebb4fd77a3615bdf5956ba844
Reviewed-on: http://review.coreboot.org/9209
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Synchronize the code with FRC.
Change-Id: I50d2a02971681bbfcf4135482b5b95a41ddaac36
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c891a3e0474235bd97268f52d09ddff574caeb95
Original-BUG=None
Original-TEST=Build coreboot image and run on Samus to confirm the setting
is properly applied.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: If387a23749b6e9470c7e67286234e18ab3e423b3
Original-Reviewed-on: https://chromium-review.googlesource.com/219523
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9208
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Chrome OS devices firmware usually includes an area called VPD (Vital
Product Data). VPD is a blob of a certain structure, in particular
containing freely defined variable size fields. A field is a tuple of
the field name and field contents.
MAC addresses of the interfaces are stored in VPD as well. Field names
are in the form of 'ethernet_macN', where N is the zero based
interface number.
This patch retrieves the MAC address(es) from the VPD and populates
them in the coreboot table so that they become available to the
bootloader.
BUG=chrome-os-partner:32152, chromium:417117
TEST=with this and other patches in place the storm device tree shows
up with MAC addresses properly initialized.
Change-Id: I955207b3a644cde100cc4b48e51a2ab9a3cb1ba0
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 1972b9e97b57cc8503c5e4dc496706970ed2ffbe
Original-Change-Id: I12c0d15ca84f60e4824e1056c9be2e81a7ad8e73
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219443
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9207
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 8455d95442ee9a39ecb182abf319469dde06d324
Original-BUG=None
Original-TEST=Modify settings, build and update the image to Samus and
Original-check the settings are applied to Registers.
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Change-Id: I3d407b8f1cb4a6ea3d6879a8581156a73f98220f
Original-Reviewed-on: https://chromium-review.googlesource.com/219073
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Change-Id: Ide6e747f1eccb74be2e21e76f592a919399bee31
Reviewed-on: http://review.coreboot.org/9206
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to not break FAFT, and to have a quicker recovery
mode boot, reboot the PD controller into RO image in romstage.
This is done before the EC since rebooting the EC into RO will
also reboot the host.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=boot samus EVT into recovery with 'dut-control power_state:rec'
and ensure that the PD controller is rebooted to RO in romstage.
Change-Id: Ieb51717c17fdcbda7aa63b6a9404959e8736c08f
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 19237f6a338fa1c593867d8dfda1edcd376878af
Original-Change-Id: I633f51afc382a7faab825c15618c0bc7566c4395
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218904
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In order to talk to the PD controller with a passthru command
coreboot needs to be able to use v3 commands.
The command version is automatically detected based on the
advertized flags from the EC.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=boot on samus EVT
Change-Id: I032eb185d80d5b68c82609910045e21d4521afcc
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4f664b22645f0def87a73e9255297b3edccf436e
Original-Change-Id: I94ace7741c9cd592921625fb793787247a5ca2aa
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218902
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9203
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Coreboot needs to be able to reboot the PD controller into RO
image in recovery mode early in the boot process in order to
avoid a lengthy recovery mode boot if it is only done at vboot
software sync time.
In order to do this a new device index field is added to the
command structure which must be initaalized to zero for all EC
transactions.
This early init and image check code is only used in romstage so
include it in the __PRE_RAM__ block.
BUG=chrome-os-partner:30079
BRANCH=none
TEST=build and boot on samus EVT in recovery mode and see that
the PD is rebooted to RO mode early in the boot.
Change-Id: Iee60aae4d49b83b4a377b71e41e8109858a90223
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b36cf37d9b5a7053ecbd15c748eac84836d413e1
Original-Change-Id: Iebc48709b527d3571618da775c849e1c3fcd6384
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218903
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9204
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This latest version includes PD passthru support.
BUG=chrome-os-partner:30079
BRANCH=None
TEST=build and boot on samus
Change-Id: Ie718b73a6b125a863ae28e63769dd54edc267f0b
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: fbca0743a4b45828a466d05afc3a2e94d2e3da2e
Original-Change-Id: I79d160219564155008f6231fec35808d1fbd6f04
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9202
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Intel will be making slight changes to USB3 PLL VCO and iCLK PLL current
on C0 stepping of BYT-M/D C0 stepping in order to meet the high demands
for these processors.
Pre-conversion materials are compatible with USB PLL VCO current increase.
Post-conversion materials ARE REQUIRED to be run with increased USB3 PLL
VCO current.
BUG=chrome-os-partner:31199
TEST=Boot Rambi, then read USHPHY_CDN_PLL_CONTROL and verify register
has new value.
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: bc01a3df80f5bd7fd86047c8bbf1584d19363e3b
Original-Change-Id: Ie9c3d0afd54ea7ced2c76ebb948de95be0828fa0
Original-Signed-off-by: Kein Yuan <kein.yuan@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211337
Original-Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Tested-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Original-(cherry picked from commit df20eca47ca0ff33baf5d554ef11dd2b35706a5d)
Original-Reviewed-on: https://chromium-review.googlesource.com/205970
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217772
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Kenji Chen <kenji.chen@intel.com>
Original-Tested-by: Kenji Chen <kenji.chen@intel.com>
Change-Id: I1c825992a2b4dfac86f77cde567d2471ca4c19e6
Reviewed-on: http://review.coreboot.org/9200
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
According to BIOS spec 8.14
B0:D28:F0[5:4] should be set to 11
BRANCH=none
BUG=chrome-os-partner:28234
TEST=build ok, boot to Auron and Samus
make sure register is set and PCIE is working
Change-Id: I4a7e990993c230dfc1ba83ea75f56757c2c18e46
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 82826e3c44c26252697677ec08b95a8f174bc360
Original-Change-Id: I7c37245053ceae460dac0f18363f585244db72f8
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217414
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9197
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds plumbing necessary to ensure that the CBMEM WiFi
calibration blobs entry, if present, is referenced if the coreboot
table.
BRANCH=storm
BUG=chrome-os-partner:32611
TEST=none - the entry is not yet in the CBMEM
Change-Id: I072f2368b628440b6fe84f310eebc1ab945f809e
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: d0330280369753a6520196425e6dfc7d7bd226a3
Original-Change-Id: I04d52934ad1c5466d0d124b32df5ab17c0f59686
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225270
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9232
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In the case of an EC wake event that is pending but not cleared
it is possible for the EC wake pin (i.e. GPIO27) to be asserted
after the kernel triggers the sleep SMI but before the system
goes to sleep.
If this happens then the GPE will be reported as a wake source
when the system wakes up again.
BUG=chrome-os-partner:33218
BRANCH=samus,auron
TEST=build and boot on samus, use the keyboard to enter suspend
with suspend_stress_test and ensure that only the RTC is listed
as a wake source upon resume.
Change-Id: Id900132bb81e4cf50885a652ed00a142d951ea4d
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 50396ab6a3a3efb3b3dea4f1c2a8f8804fed943e
Original-Change-Id: I319dc22e21126a3086415f8f8b2b35eaec66fd50
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/225540
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9231
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Disable Root Port0 only when there is no PCIe device
present on any root port.
BUG=None
TEST=Boot Rambi with PCIe installed/non-installed on RP0 to
confirm the RP0 is correctly enabled/disabled. However, I still
need someone to help check if RP0(no device) is still enabled
if there is device on other RPs since since I have no devices
having slots from RP1/2/3.
Change-Id: Iae552975250ed6f309c423b847621b8994172891
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: c5cef0b7c2c146f0d46ed49b75fd2ec8369210ce
Original-Change-Id: I7147569e78b2d1ecea070bc933773cdcae59f9e7
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217791
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9219
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Report PCI routing table of all PCIe root ports for legacy interrupt.
Some PCIe devices using legacy interrupt can't work if PCI routing table
isn't defined. It's necessary and defined in BWG Chapter 28.1.3.
BUG=chrome-os-partner:31943
TEST=compiled and tested
BRANCH=NONE
Signed-off-by: Ted Kuo <tedkuo@ami.com.tw>
Change-Id: I2c684edfd1fc624bed471783584250cd9f5e66f5
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: b9040d564a32607327057a84b9aab14e66cd5b45
Original-Change-Id: Ia15ced6c5fdcc6712e5f2831e42c6dee320f166b
Original-Reviewed-on: https://chromium-review.googlesource.com/218422
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Ted Kuo <tedkuo@ami.com.tw>
Original-Commit-Queue: Ted Kuo <tedkuo@ami.com.tw>
Original-Tested-by: Ted Kuo <tedkuo@ami.com.tw>
Reviewed-on: http://review.coreboot.org/9201
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Mark GPIO42 as unused according to Samus schematics
BUG=None
TEST=Make the chnage; Pass the build process; Need someone having
the board perform the verification.
Change-Id: Ib53a3ae062d414a2c98ec0756e759760d179e3fd
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 4e0f8f3276c575ff60fbda709de5d3cfe31a5900
Original-Change-Id: Ifd6a0d2de8af0fe3af4a14f44ce572b41b77509c
Original-Signed-off-by: Kenji Chen <kenji.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217344
Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/9199
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For now storm bootblock runs with DRAM fully initialized, this patch
puts the early console between bootblock and rom phase.
BUG=chrome-os-partner:31734
TEST=verified that preram_cbmem_console is set:
$ grep preram_cbmem_console cbfs/fallback/bootblock.map
40618000 A preram_cbmem_console
Change-Id: I2d63f5fde0d3794062068289c648d8bcda11a9a3
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 6bdadad3787d6a4a2d4828b0f300455fedca2b8d
Original-Change-Id: I132a0cbcc82e713c36fc5031706d9afbf3e9b879
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217291
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9198
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
mosys will use this field to identify system
BRANCH=none
BUG=chromium:359155
TEST=build ok, use dmidecode to check whether data is
written correctly
Change-Id: I461215c012b6ad712b3f813a3928e90a23bf54f1
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 7adbdab761cd7b4bda0a43e7b1c4070de26f150a
Original-Change-Id: Icfbd4c61fc49a9cb3d3ecd2b622339957963150c
Original-Signed-off-by: Kane Chen <kane.chen@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/217400
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/9230
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
this adds a driver for vboot to read and write nvdata in spi flash.
it's assumed that flash contents are erased to 1-bits and write
operations can only change 1-bits to 0-bits.
when all nvram space is used, the driver will erase the whole block
and start the next write from the beginning.
BUG=chrome-os-partner:32774
BRANCH=ToT
TEST=Built for cosmos.
Change-Id: I40858f847151aa0770e1101e905476d270550f60
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 09713828b7b0cabd13a08de3f34e32bc4dbef4a4
Original-Change-Id: Ia9049f342b21fa4c289cb7b9254ab89ec1ef1699
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/226525
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9229
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Since the E0 and F0 stepping parts have the same CPUID it is
necessary to use the MCH PCI device revision to determine what
the actual stepping is.
Add this decode table so the early output gives proper identification
of the installed CPU type.
BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus with E0 and F0 parts
Change-Id: Idce1e289cd958c77febc87395f27570247512a87
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: a5346141e45b105a35a7641f60b29e02ab2bdfa3
Original-Change-Id: I1bc127badd75ecc34d3d2dbae5d272bd4d9f9082
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223158
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9228
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The F0 stepping has the same CPUID as E0 stepping so report
it as either stepping to avoid confusion.
BUG=chrome-os-partner:32359
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I99a83855b4393d736724836b709702417483b5d2
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 55ed3bc880c31c0ca5c8a21c335722af05eb57f7
Original-Change-Id: Ia4955f346ceb9be92e06ecea5b7a8fe2db84cabc
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/223097
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9226
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix the typo of sate to state and add uKernel phase to just
output the current state byte.
BUG=chrome-os-partner:28234
BRANCH=samus,auron
TEST=build and boot on samus
Change-Id: I5f341ee6c58487aeb927cab0641742cb4071a6b7
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: de6149508c50d0770fedfbe352e9149abea87b4c
Original-Change-Id: I520a4cc75faffa5feeb6113ffd7b07a48c4e6f28
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/222677
Original-Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9225
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
CQ-DEPEND=CL:218766
BUG=none
BRANCH=none
TEST=built and booted on Pinky
Change-Id: Ib3eed77553433e9f8c70af8b148729e628c95747
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: 56b3e8c02a4e45653a5369ce47dcbce0c18f7194
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Icbee95350949bd9bfa4490a8a4b6bbf09beb4170
Original-Reviewed-on: https://chromium-review.googlesource.com/221019
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9224
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I480d6bfe29c77119892fcb1fbb9779fd7e3529c3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9139
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
TEST: Booted ASUS KFSN4-DRE and verified SMBIOS contents
via dmidecode utility.
Change-Id: Id656f2f6cf5a4ecafa03e150ad91f69107a4fe88
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9140
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
Change-Id: I49c5d39a674351f7375fb762fc9ef4a3700d7c87
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9177
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Instead of relying on the CBFS header's romsize field use
the CONFIG_ROM_SIZE Kconfig variable. That value is what is
used to create the rom file as it is. Therefore, just remove
the dependency.
Change-Id: If855d7378df20080061e27e4988e96aee233d1e0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9130
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
src/northbridge/amd/amdfam10: Add amdmct_cbmem_store_info()
function.
Change-Id: I07376e276e3e9e3247d2576a09e58780d32a3a76
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9138
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
|
|
echo is evaluated by a shell builtin producing non-binary
spd data of the form '-e -n \<byte>'. Correct this by
using printf builtin which does the equivalent and is
more cross platform friendly.
Boards changed:
gizmosphere/gizmo
gizmosphere/gizmo2
google/bolt
google/falco
google/link
google/peppy
google/rambi
google/samus
google/slippy
pcengines/apu1
Change-Id: Iefdaf59903b9682cc88c94fd991883b560616492
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9196
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In commit 72a8e5e751a7fa97c9d198f68cad49f9d9851669 the
Makefile's were updated to use named types for cbfs
file addition. However, the call sites were not checked to
ensure the types matched. Correct all call sites to use the
named types.
Change-Id: Ib9fa693ef517e3196a3f04e9c06db52a9116fee7
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9195
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
currently, if the cache size is, for example, 4096 byte, mapping 4096 byte data
fails due to the overly strict check. this change allows cbfs_simple_buffer_map
to use all the cache space to the last byte.
BUG=None
TEST=Booted Nyan Blaze.
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I0797b5010afd7316fdec605784e8f48e2d62c37f
Original-Reviewed-on: https://chromium-review.googlesource.com/218883
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit b0b31da336fa2f87fe73f063782d6243f8262d10)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I15e11e574cd14484fe83c9c3674bb5c2d14422f6
Reviewed-on: http://review.coreboot.org/9178
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
1.) Allow MCT information structures to be copied to cbmem.
2.) Retrieve DIMM vendor, model, and serial information.
3.) Allow maximum installable memory to be set via devicetree.
Change-Id: I0aecd2fb69ebad0a784c01d40ce211f6975a3ece
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9137
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
This allows safe access of romstage MCT values from ramstage
Change-Id: I229b19a64f7f148f970ec86dde7f4b6a62469064
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9158
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
And this path is already included properly elsewhere.
Change-Id: I9fc6887fc047a9df1c4cb6fa4f841abb16f6d548
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9174
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I39841c5358c53e6d2325d1304fd6cdfadb7f7ac4
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/9173
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Some of the files which include cbfs_core.h don't even need
the header definition while others just need the cbfs API
which can be obtained from cbfs.h.
Change-Id: I34f3b7c67f64380dcf957e662ffca2baefc31a90
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9126
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The serialized format of CBFS is separate from the APIs
used to traverse and read from CBFS. Separate those out
so they can be consumed as a standalone header.
Change-Id: I09f71d9c474ee9f23a62b0062ffa777963d1a4dd
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9125
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
When doing an EC requested reboot to RO mode clear the
saved post code in order to prevent confusing events in
the log where the system is rebooted intentionally.
BUG=chrome-os-partner:28234
BRANCH=none
TEST=build and boot on samus, run FAFT, check for odd
eventlog entries about last post code 0x31 when it is
rebooted during samus romstage entry point.
Original-Change-Id: I8bedc611712424bf1044cdca1972e34ffdd51abd
Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/215681
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit e32d7a7e54e7006b84509dbc2bfe9b4b022eba71)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iad816669fb4054260f995f6f0bfb140121aaddff
Reviewed-on: http://review.coreboot.org/9176
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Instead of having 2 different functions to call when a program
is loaded provide a single callback with flags parameter. The
previous callbacks for cache management routines did this:
for_each_program_segment:
arch_program_segment_loaded(start, size);
arch_program_loaded();
Now, use one callback instead:
for_each_program_segment:
arch_segment_loaded(start, size, SEG_FINAL?);
Change-Id: I3811cba92e3355d172f605e4444f053321b07a2a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There's no need to keep track of struct payload within
the boot state machine. It is completely contained within
the payload loader module.
Change-Id: I16fcecf43d7fb41fc311955fdb82eabbd5c96b11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8836
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The functions related to caching ramstage were in cbfs.h.
Now that the loading code is separate move those declarations
to the common program_loading.h.
Change-Id: Ib22ef8a9c66e1d2b53388bceb8386baa6302d28b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the run_romstage() API to prevent code duplication
and more maintenance for any API changes or features.
Change-Id: I4122b813cccf4dc0703f256e1245deeeb90deeb9
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9172
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The run_address() function is not used. Remove it.
Change-Id: I96de4cf0a529b08943ff8281cedead642eb415de
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9124
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Indicate to reset of coreboot that MAINBOARD_HAS_CHROMEOS
instead of auto-selecting it.
Change-Id: Ide84bc0d8f801c79457dc05f768dd717a8a2f700
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9154
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Commit f69a99db (coreboot: x86: enable gc-sections) added
gc-sections to the linker command line. The SMM-specific
linker scripts were not interrogated to see if all the
sections were being included properly. .data, .bss, and .sbss
did not have the proper globs set to put the SMM programs in
the expected order.
Lastly, explicitly set the ENTRY for the SMM programs.
Change-Id: Ibb579d18d4819af666d6ec7dfc30776e8c404b71
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9160
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: I4110debd6d3818d4a803ed22037166c226f2ed11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9142
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
When building HAVE_REFCODE_BLOB there are a couple of errors. One
is a failure building !CHROME_OS. The other is from a header
change where console_tx_byte() was declared.
Change-Id: Ia912902e8276d13b8e1716aa16c57b111579a03d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9141
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@google.com>
|
|
Indicate to rest of coreboot that MAINBOARD_HAS_CHROMEOS
instead of auto-selecting it.
Change-Id: I61cde263f4ad7bd6758a61fc54c456c2ad2f343e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9153
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These binaries were being added to CBFS using hexadecimal values instead
of the CBFS binary type names. The same value was being used in
different places for different things.
For example, the value 0xAB is used for SPDs, MRC & FSP binaries.
This patch uses CBFS type names instead of hex values everywhere a
hex value was previously used.
Change-Id: Id5ac74c3095eb02a2b39d25104a25933304a8389
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/8978
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Low level 64 bit division and modulo functions are not available for
MIPS platforms, but are required by the printk formatter.
Modify the code to avoid 64 bit math when building for MIPS. In case
the user does print a value exceeding 2^32, send a few junk characters
to the output to indicate a corrupted value printed.
[pg: add the printed sequence to the comment, so git grep can find it]
BRANCH=none
BUG=none
TEST=startup code on Urara properly prints CBFS address values which
are passed as 64 bit integers.
Change-Id: Ie777019cd8d55c53d5e816fbacfe79893c3d64c7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8347f914a9cceca017668f8387ba679c2c79e66d
Original-Change-Id: I25b8a900b3ba4ec1da3446dcc5f03101d5cdb757
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/232294
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9162
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Id7f438a95fc7c7b41ce3d0fb419b0b455f8367a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9167
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This replicates commit 3f7ad7b216b4021c7cb93201a94b0fae46f5e19e and
commit 823edda98e6512d3f455b61549efea6fa68ee2b0 for mips.
Change-Id: Id97e1fefa20cfa3bcb2cf0336b5a4ff7d9fe813b
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9166
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The console interface changed in upstream, and the
driver didn't reflect that yet.
This wasn't obvious because the driver wasn't compiled
at all.
Change-Id: Id18391e62e7ebd8f5fc929838ce27bf414e364f9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9165
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This doesn't even compile in downstream.
Change-Id: Ic7b3736db86e8de155e0f37afa970ce5095396fa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9164
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The mips Makefile was inherited from x86 and so included lots
of stuff that is necessary on x86 but nowhere else.
That cruft is now gone.
It also adopts the non-x86 approach of handling linker scripts,
hardcoding an include to ldoptions there, instead of manual
concatenation (of just one file plus options).
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ibf0c7096f9425572d8f83837aa6a253fd91e212c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9163
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
It's x86 specific.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Iacb91b47c89041435dd27c2c9ad34a231adf21d2
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9115
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Introduce generic-$(type)-ccopts and $(class)-generic-ccopts
to declare compiler flags that apply to all files of a certain
type or of a certain class. Then use them.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I655688e82a0cc5bad89b6f55dc217b9f66b64604
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9114
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I192fa50989b586fd8e967d4c22db56ac9de7a30e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9108
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I5405c0ee6bee203281e723feaecaee57fad8f6cb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I79b4969c34500fd51b1ce2ad751bc0723ee0afa2
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/9147
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: Ib85701965337bb6231d8df59d43789dfe8a036d3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9136
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I337584d1f4ce32094c24478a99418e0775cf9ab5
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9135
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The ASUS KFSN4-DRE has a physical BIOS recovery jumper;
force coreboot into fallback mode if that jumper is set.
Change-Id: I513299c3e3261fc76133a49813685d48c53a172a
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9156
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I6426ea2ca1732a6edfae059fe5dbf4f398bc9b98
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9155
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
It points to a binary.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I164d7f717a9523d187e2c215083e176b59fd5acc
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9113
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: Ia22c9fcbf8c629d0eb3f1356f80c4565f117d8b8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9110
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We have .lb, .lds, and .ld in the tree. Go for .ld everywhere.
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I3126af608afe4937ec4551a78df5a7824e09b04b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I362e2f6a978de23e72e6fc9c83bc99457cd76d9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9112
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This is inspired by the commit listed below, but rewritten to match
upstream, and split in smaller pieces to keep intent clear.
Change-Id: I8a5dc66d8c0dc4ccdb6dc3d66b8cdbf50dc976ca
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Based-On-Change-Id: I50af7dacf616e0f8ff4c43f4acc679089ad7022b
Based-On-Signed-off-by: Julius Werner <jwerner@chromium.org>
Based-On-Reviewed-on: https://chromium-review.googlesource.com/219170
Reviewed-on: http://review.coreboot.org/9111
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Use the run_ramstage() function to load and run ramstage.
Change-Id: I783801bf506fa2f9608eefe1cd20257292c80af5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Add the approrpiate car* empty implementations as well as types
included within the rest of coreboot to start building correctly.
Change-Id: Ifaf10281f9a9e28f518f4694630cbffa3f8d187d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9150
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Aaron Durbin <adurbin@google.com>
|
|
With VPD blob of certain format, CBFS cache on storm proves to be not
large enough. This patch makes it bigger, it is still well above the
area preserved for the NSS.
BUG=chrome-os-partner:32152
TEST=the system now boots with the VPD it used to fail booting.
Change-Id: Iee1214b218ee3f8aca28797841501c227549affb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6f19ca8cb9a2efa1d295f038730ed06ec9ceb8c4
Original-Change-Id: Ia88b598ad5e4b6adcbd87d865e43be57fbf0ea98
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219572
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9122
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The actual level required to take the ethernet switch out of reset is
low, not high.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: If4004ac5c2dc837270d4cb840d96ce92021d231e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9fa69d22de901cd0843948de0f95a66a2aa99353
Original-Change-Id: I81eeb73b85cf113709b6d4ac3aa7639a40fa6719
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217416
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9121
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proto0.2 hardware connects gpio26 (sw reset) to the ethernet
switch reset pit. The output stays low (or high-z) after power up,
which holds the switch in reset. Deassert the signal at startup on
hardware rev 1 and later.
BUG=chrome-os-partner:31780
TEST=with this patch applied, when proto0.2 boots, the ethernet
switch's LED blink once, as was the case with proto0.
Change-Id: I4c5a0cc499563a33aa7d29be7767d0ec5d93c20f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 6788962172c6e29e193fa3e85ca79cb83a96e154
Original-Change-Id: I81b3dccb1d1d43c5c1e6dcb5400af8eed6dee870
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217087
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9120
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Figuring out board_id on storm requires reading tertiary gpios, which
takes time. Let's calculate it once and reuse it when necessary.
BUG=none
TEST=verified board ID reported as 0 and 1 on proto0 and proto0.2
respectively.
Change-Id: I69f6afa3de8a175a1d723e95902efd15607e68b7
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 080c839c1c0c1b5e389b2382144ef67535bb4ff1
Original-Change-Id: I4e237077d1d9a96daebba462cd00f3f40be14518
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/217086
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9119
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The proto0 storm hardware has the TPM reset line wired to the SOC GPIO22
pin instead of the system reset. This causes all kind of TPM behavior
problems and requires frequent power cycles. Adding explicit TPM reset
makes all those problems go away.
BUG=chrome-os-partner:30705, chrome-os-partner:30829
TEST=tried resetting proto0 at different moments during boot up - the
TPM does not fail anymore.
Change-Id: Idfa16e6e868336f38861edeb75703fff3f35172c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d5e07815c227089b7f266ba5329812bf309b87e6
Original-Change-Id: Ia877fcd9efaf3ba12c8fe8c2958bd81c4bf22799
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211497
Original-Reviewed-by: Trevor Bourget <tbourget@codeaurora.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/9118
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Storm provides three real and two fake gpios. To keep things simple,
define them all as active low and provide appropriate values for the
fake ones.
BUG=chrome-os-partner:30705
TEST=with the appropriate depthcharge change booted proto0, observed
appropriate behavior following the dev switch setting
Change-Id: I248b90ee06d226a223b6fc0993f209acdd58c77d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d48d1dcc88df0c1bd4c50f14dd2e7cd1dd4fba5d
Original-Change-Id: Icb7fb55949fa97ead9d19f0da76392ee63bbb5b8
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210922
Reviewed-on: http://review.coreboot.org/9117
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change updated the EMC tables with emc_reg_tool 5.0.18,
for below memory SKUs:
- Hynix H5TC4G63AFR-PBR 2GB, ramcode = 0
- Micron MT41K256M16HA-125 2GB, ramcode = 1
- Samsung K4B4G1646Q-HYK0 2GB, ramcode = 2
- Hynix H5TC8G63AFR-PBR 4GB, ramcode = 8
- Micron MT41K512M16TNA-125 4GB, ramcode = 9
- Samsung K4B8G1646Q-MYKO 4GB, ramcode = 10
BUG=chrome-os-partner:30963
BRANCH=blaze
TEST=emerged coreboot, booted successfully into kernel.
Change-Id: Iee329ff09e35cddd3c868c0460a38ef56b2ac5bb
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 158872ff7c0dd5274cfa8d63ec17b4423a4592ce
Original-Change-Id: I44adfdb5b433e37e2d25095acdcce3d9c14eb897
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/210024
Original-Tested-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-on: http://review.coreboot.org/9116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=None
BRANCH=None
TEST=Compiles successfully and pmc rst status POR is seen.
Change-Id: Ic09cb46d9be7670e467543e42b251efb1a4313d0
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5dbfae6bbc0f4f30e216e37b515f4120f7833a38
Original-Change-Id: Id0c2b208222deaf099b8938ba583551979588d52
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220721
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9106
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Also, get rid of unused clk_rst variables.
BUG=None
BRANCH=None
TEST=Compiles successfully
Change-Id: I6487162454159a81b31fe0d6d39c2bdbed3f859a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 030081fe85fc9609fdf2003cf51b7350e08f0429
Original-Change-Id: I880ae5c396c33006f6b184cca7f171e4373f4016
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220720
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9105
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Both buttons are active low.
BUG=chrome-os-partner:32517
BRANCH=None
TEST=Compiles successfully and volup and voldown button presses are detected in
pseudo keyboard driver in depthcharge
Change-Id: If217a75f95042af8a831e7109d9b1acb10c55823
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c393e166a1ed0bc7920078aac6accf442abb5955
Original-Change-Id: I08f94972db53aa17a63f6e16cbaebe7af358cdc2
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/220687
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9104
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Measure the MTS load time, MTS initialization time, and
the ramstage verification/load time.
BUG=None
BRANCH=None
TEST=Booted and noted timings.
Change-Id: I1eb1e3a73316a3fa76ef8e73314bedde34c6c582
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: b5b34a3abd388359b7d1cba5a858e4e5a402b476
Original-Change-Id: I71119689182e86406d5052f007908152d41e9092
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219715
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9103
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There's no need to add DMA ranges for these boards as
that memory is allocated within dpethcharge now. Additionally,
the DRAM_DMA_* Kconfig options were removed resulting in 0
values.
BUG=None
TEST=Built rush and ryu.
BRANCH=None
Change-Id: I597437960e4fddbf6d26f0b15ddeefc4557adc8b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f26b503d759b2bac902e58e928d7c625c1a6c575
Original-Change-Id: I52bb8f760a56226c75611f7981570a44d56f242e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219710
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9101
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
BUG=chrome-os-partner:31821
BRANCH=None
TEST=Built and booted to kernel prompt on ryu. Rush compiled successfully.
Change-Id: I63ba55c53094c185d72dcb5c5d0d766461989806
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4a9aa565244bae5659e458ea90064eb5b803d574
Original-Change-Id: I5b00fbcb8e414c67563f1ad548f84c281898f939
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219392
Original-Reviewed-by: Tom Warren <twarren3959@gmail.com>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9100
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Clean up functions to write to clk_enb and rst_dev registers and add
clock_disable and clock_set_reset functions to provide a complete API for
updating the registers.
BUG=chrome-os-partner:31821
BRANCH=None
TEST=Compiles successfully and boots to kernel prompt on ryu. Compiles
successfully on rush
Change-Id: Ib0b7e3fc322f18be396ecf3b02b2399d4ba33e9b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bb222adc22c7e26077dfb2ba6e4d41a4965d183
Original-Change-Id: Icb8081fe3d80174c920eaaecf5cbb0aa912d5b19
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/219191
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9099
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
Since PSCI dynamically determines which EL to transition
to based on SCR_EL3 there's no need to provide that
information.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted into kernel with MP.
Change-Id: Ia59bc8116ec4ae9bde2e6cad1861f76c14f7d495
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8bc5f7c8a114568ede98478c2fbea2f8b7d97f0c
Original-Change-Id: I8783b6315dca01464e14c9d2b20d009cf0beeb67
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218924
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9098
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The PSCI functionality initially includes CPU_ON and CPU_OFF
functions. Upon entering secmon if the parameters are non-NULL
then a PSCI CPU_ON action is done for the current CPU.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Booted kernel with PSCI support. Brought up all CPUs in kernel
using PSCI. Turned CPUs on and off.
Change-Id: I256fa45a1c9889ff9d7990eb1898df1ec241c117
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 689ba03e313e7e52e9b74aa774897b55cbd52748
Original-Change-Id: I943826b7dbcc8e3f6c8c4b66344af8fac12ba94e
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218923
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9097
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
If an exception is taken that the secmon won't return
to, there needs to be way to reset that cpu's state
w.r.t. stack usage. Therefore, provide secmon_trampoline
which will reinitialize the exception stack and SP_EL0
and start executing with SP_EL0 like the initial state
of the secmon entry.
BUG=chrome-os-partner:30785
BRANCH=None
TEST=Built and booted to kernel. Also tested when PSCI
is employed in the kernel.
Change-Id: Ie9f5bbe715dcbcf8b67ea40f9a3a5088ac7aa2ad
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1f546ee3e9eca93baaa1ae0437351205bf548a5
Original-Change-Id: Ia3da75e1fa0251c8ea30eb0b0523c8a51c03b917
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218922
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9096
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I9b094e9d22726d67d41f2ce78088f361c73895fd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4c0bfb5f747f55009b7c2b2ba4b24d91443b1639
Original-Change-Id: Idd5b95cfec7d3ade7508393b81ab3049ce15a2fb
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218950
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9095
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Two things:
1. Not returning once setting the return state.
2. mempcy(x, y, ARRAY_SIZE(x)) is not memcpy(x, y, sizeof(x))
With these 2 changes arguments and results are being processed
correctly.
BUG=chrome-os-partner:32112
BRANCH=None
TEST=Built and brought up SMP using PSCI.
Change-Id: If76a207e1a434a4c08faaa535f069d7386481e9e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 42d540afd4e6ea2b34cf3632ad2c683fcaa063c8
Original-Change-Id: I656b9c11e3bc07cc1664789a600eb88afd639f93
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/218847
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/9094
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Do the absolute minimum needed to allow the DPAUX mux ctl write
for I2C6. This leaves HOST1X off (reset and clock disabled) to
avoid a conflict with any kernel display driver init.
I2C6 init/enable will be moved to ramstage in the next CL.
BUG=chrome-os-partner:31820
BRANCH=none
TEST=Dumped Speaker Driver (AD SSM4567) regs on Ryu, looks good.
Change-Id: I42106778a26c5a1d1483cc308b8314599c391539
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 24a9ebfda31c620b24e5c765dc950b87e3e5587b
Original-Change-Id: I0760222f1d7ccee207ae9871aeed3e2ddbca3dca
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/218900
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9093
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
