Age | Commit message (Expand) | Author |
2010-06-10 | The devicetree was wrong, but I'm still surprised it broke. This fixes the | Myles Watson |
2010-06-09 | Same conversion as with resources from static arrays to lists, except | Myles Watson |
2010-06-09 | Make k8 & fam10 northbridge.c code more similar. | Myles Watson |
2010-06-09 | The interrupt controller lives at I/O 0x4d0/0x4d1. | Stefan Reinauer |
2010-06-09 | This patch adds the ECS P6IWP-Fe board to coreboot. | Anders Jenbo |
2010-06-08 | Fix auto-mangled comments (trivial) | Patrick Georgi |
2010-06-07 | Fix some of Peter's suggestions for the Nokia IP530. | Myles Watson |
2010-06-07 | Remove the rest of cardbus_scan_bus. | Myles Watson |
2010-06-07 | cardbus_scan_bridge is identical to pci_scan_bridge | Myles Watson |
2010-06-07 | This patch extends the reserved resources for the cs5536 to avoid the excluded | Myles Watson |
2010-06-07 | Make sure VSA is linked as ELF32 for i386 (instead of whatever the compiler c... | Patrick Georgi |
2010-06-07 | replace outb -> port 0x80 with post_code() in some places. | Stefan Reinauer |
2010-06-05 | Fix two warnings: | Stefan Reinauer |
2010-06-05 | tly cosmetical. don't use movw because we use mov in most places. | Stefan Reinauer |
2010-06-04 | This patch fixes the option rom code that was buggy when it switched | Edwin Beasant |
2010-06-04 | Kconfig value is hex, not int. | Myles Watson |
2010-06-04 | 128KB is the default, and isn't large enough with the 30K payload for abuild. | Myles Watson |
2010-06-04 | Fixes for Nokia IP530 and associated drivers. | Marc Bertens |
2010-06-04 | Enable PCI_OPTION_ROM_REALMODE when GEODE_VSA is selected. | Myles Watson |
2010-06-04 | This patch replaces the headers of the following files: | Frank Vibrans |
2010-06-03 | The code was ported. Now it is what it should be. | Zheng Bao |
2010-06-02 | Fix hard-coded log levels. | Myles Watson |
2010-06-01 | Fix a format string to keep the compiler happy. | Marc Bertens |
2010-06-01 | CONFIG_DEBUG is too generic. Remove it and replace it with CONFIG_DEBUG_SMBUS | Myles Watson |
2010-06-01 | Check the value of ulzma and do not continue if there was an error. | Myles Watson |
2010-05-30 | don't generate C source code file but use objcopy to include the SMM blob. | Stefan Reinauer |
2010-05-30 | This patch adds support for mainboard iBASE:MB899 | Bernhard M. Wiedemann |
2010-05-28 | Add Intel Atom microcode | Stefan Reinauer |
2010-05-27 | Fix MBI walker. | Joseph Smith |
2010-05-27 | fix warnings. | Stefan Reinauer |
2010-05-26 | Update Intel microcode include files from their web page. | Stefan Reinauer |
2010-05-26 | Use the microcode files as created by the new microcode update script. (Fixes... | Stefan Reinauer |
2010-05-26 | Drop problematically licensed Intel microcode files | Stefan Reinauer |
2010-05-26 | cosmetical changes on intel's microcode.c | Stefan Reinauer |
2010-05-25 | Move CS5535 specific setup from GX2 driver to CS5535. | Stefan Reinauer |
2010-05-25 | also rename the config option. | Stefan Reinauer |
2010-05-25 | fix most usbdebug warnings and fix function names. | Stefan Reinauer |
2010-05-25 | Long ago we agreed on kicking the _direct appendix because everything in | Stefan Reinauer |
2010-05-25 | Fix usbdebug compilation. | Stefan Reinauer |
2010-05-25 | cosmetics. | Stefan Reinauer |
2010-05-24 | Fix VGA after switching to realmode_interrupt() | Michael Marineau |
2010-05-23 | consistently use decimal for the register offsets, and fix comment typos. | Stefan Reinauer |
2010-05-23 | Fix bug from r5476 re CS5536 device search during GeodeLX PCI domain enable | Peter Stuge |
2010-05-22 | Add tinybootblock support for broadcom/bcm5785. | Patrick Georgi |
2010-05-21 | Add "reasonable" values in ASL at places we overwrite from | Stefan Reinauer |
2010-05-21 | Fix amdk8_util.asl and explain behaviour a bit. | Myles Watson |
2010-05-21 | Get rid of this warning: | Myles Watson |
2010-05-21 | Use lists instead of arrays for resources in devices to reduce memory usage. | Myles Watson |
2010-05-20 | Move generation of mptable entries for ISA to generic code. | Patrick Georgi |
2010-05-20 | Add support for the Traverse Technologies Geos mainboard. | Nathan Williams |
2010-05-19 | Move the 'USE CMOS' Kconfig question. | Joe Korty |
2010-05-19 | cosmetic comment changes. | Stefan Reinauer |
2010-05-18 | get rid of some duplicate inclusion warnings. | Stefan Reinauer |
2010-05-16 | Sorry for this for second time. Now compile tested for both cases ;) | Rudolf Marek |
2010-05-16 | Sorry for this. I fixed that reverting the change for ROMCC. | Rudolf Marek |
2010-05-16 | Following patch reworks car_disable into C. Tested, works here. I compared | Rudolf Marek |
2010-05-16 | Part of 5560 Dunno why I need extra delete after move. | Rudolf Marek |
2010-05-16 | Following patch reprograms SIL3114 into PCI IDE native mode compatible class ... | Rudolf Marek |
2010-05-16 | Add support for the Getac P470 | Stefan Reinauer |
2010-05-16 | v2 -> v4 | Stefan Reinauer |
2010-05-16 | Add two new superios to coreboot: | Stefan Reinauer |
2010-05-16 | Add TI PCI 7412 support. | Stefan Reinauer |
2010-05-14 | ITE IT8671F: Add it8671f_48mhz_clkin(). | Anders Jenbo |
2010-05-14 | Add initial support for the GIGABYTE GA-6BXE. | Anders Jenbo |
2010-05-14 | clean up some prototypes | Stefan Reinauer |
2010-05-14 | i945: | Stefan Reinauer |
2010-05-14 | more acpica fixes... The tricky part is the stuff in the AMD mainboard direct... | Stefan Reinauer |
2010-05-14 | Fix i945 ACPI for ASL Optimizing Compiler version 20100428. | Stefan Reinauer |
2010-05-14 | Remove another set of includes from Fam10 romstages: | Patrick Georgi |
2010-05-14 | fix SeaBIOS loading on GX2. | Nils Jacobs |
2010-05-14 | Fix warning. Hardware tested and didn't change behavior. | Stefan Reinauer |
2010-05-14 | license header fixes | Nils Jacobs |
2010-05-14 | This patch cleanes up the Wyse S50 port and unifies the memmory regions | Nils Jacobs |
2010-05-11 | Change real mode API to allow passing intXX number or entry point and | Stefan Reinauer |
2010-05-10 | Make show_all_routes work for fam10. | Myles Watson |
2010-05-10 | High tables don't have to be on node 0 on K8. Make it less restrictive. | Myles Watson |
2010-05-09 | Remove extra NULL #define in amdht code. The | Patrick Georgi |
2010-05-09 | Move includes to where they are needed. This allows to simplify | Patrick Georgi |
2010-05-09 | Remove pc80/serial.c includes in ROMCC boards and include | Patrick Georgi |
2010-05-09 | i82830: fix debugging output and clarify bracketing | Stefan Reinauer |
2010-05-08 | autoprobe apic cluster and application processors on K8 systems | Stefan Reinauer |
2010-05-08 | Add the Wyse S50 thin client to Coreboot. | Nils Jacobs |
2010-05-08 | wipe some old unused code, this has been cleaned up now. | Stefan Reinauer |
2010-05-08 | We didn't have console.initobj.o before, but the same hard coded | Stefan Reinauer |
2010-05-08 | Drop console/console.c and pc80/serial.c from mainboards' | Patrick Georgi |
2010-05-06 | Remove duplicate Kconfig entry. Trivial. | Patrick Georgi |
2010-05-05 | Rename "apic" and "apic_cluster" to "lapic" and "lapic_cluster" | Patrick Georgi |
2010-05-04 | Fix arima/hdama. It was changed to match newconfig, which was broken. | Myles Watson |
2010-05-03 | Qemu, despite "emulating" an intel chipset, uses the CMOS to | Valdimir Serbinenko |
2010-04-30 | fix superio warnings. interesting side node: most superio .h files have no | Stefan Reinauer |
2010-04-30 | Factor out casmap calculation. Gets rid of a warning. | Myles Watson |
2010-04-30 | Remove some warnings. For code that is called from the mainboard romstage.c | Stefan Reinauer |
2010-04-30 | Remove some more warnings. The code is only used by functions protected by the | Stefan Reinauer |
2010-04-30 | get rid of some more warnings.. | Stefan Reinauer |
2010-04-30 | fix compilation of mtarvon | Stefan Reinauer |
2010-04-30 | Doesn't need to be a warning. | Stefan Reinauer |
2010-04-30 | drop extra pci access functions. these are exact copies of romcc_io.h. | Stefan Reinauer |
2010-04-30 | Get rid of a few more warnings. | Myles Watson |
2010-04-27 | Enable the cache before initializing the processor name, like model_10 does. | Myles Watson |
2010-04-27 | Enable 440BX NB to use large memory modules | Anders Jenbo |