aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-03-08drivers/intel/fsp2_0: Add MemoryInit APIAndrey Petrov
This adds implementation of fsp_memory_init() that is used to train memory. Change-Id: I72268aaa91eea7e4d4f072d70a47871d74c2b979 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13798 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-03-08roda/rk9: Remove #include early_serial.c from romstageAntonello Dettori
Remove dependency on early_serial.c and instead use the Super I/O's header to access the functions needed. Also re-organize some of the superio code in order to succesfully compile the rom. Change-Id: I85a6f1352ae3b91c3c98e4d3fa0b90b87e02babc Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13925 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-07intel/fsp_baytrail: use 20K PU/PD for GPIOBen Gardner
The E3800 datasheet only lists 2K and 20K Pull Strength for the GPIOs. The 10K and 40K values map to 'reserved'. This brings the code closer to the non-FSP baytrail. Change-Id: I77078bdbbccc00976525dc43fb98f5b2e79eae03 Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/13907 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-07soc/intel/quark: Split out MTRR supportLee Leahy
Split out the MTRR support into a new module: mtrr.c. TEST=Build and run on Galileo Change-Id: Ib9ec479d171dbbc062509e14fbe246f6d90e903a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13895 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-07mainboard/intel/galileo: Enable SD flash cardsLee Leahy
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05tpm/acpi/tpm.asl: Only include tpm.asl if tpm is enabledMartin Roth
If the TPM code isn't getting built in, the Kconfig symbol CONFIG_TPM_TIS_BASE_ADDRESS doesn't exist. This ends up creating an invalid operating region in the ACPI tables, causing a bluescreen in windows. This should fix this issue: https://ticket.coreboot.org/issues/35 "commit 85a255fb (acpi/tpm: Gracefully handle missing TPM module) breaks Windows" Change-Id: I32e0e09c1f61551a40f4842168f556d5e1940d28 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13890 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-05arch/x86: Add common assembly code for stages that run in CARAndrey Petrov
This adds a few assembly lines that are generic enough to be shared between romstage and verstage that are ran in CAR. The GDT reload is bypassed and the stack is reloaded with the CAR stack defined in car.ld. The entry point for all those stages is car_stage_entry(). Change-Id: Ie7ef6a02f62627f29a109126d08c68176075bd67 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13861 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-03-05arch/x86: document CAR symbols and expose them in symbols.hAndrey Petrov
Attempt to better document the symbol usage in car.ld for cache-as-ram usage. Additionally, add _car_region_[start|end] that completely covers the entire cache-as-ram region. The _car_data_[start|end] symbols were renamed to _car_relocatable_data_[start|end] in the hopes of making it clearer that objects within there move. Lastly, all these symbols were added to arch/symbols.h. Change-Id: I1f1af4983804dc8521d0427f43381bde6d23a060 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13804 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-03-05amd/thatcher: Removed #include early_serial.c from romstageAntonello Dettori
Remove dependency on early_serial.c and instead use the Super I/O's header to access the functions needed. Change-Id: I9edf7fc2501aa832106dda9213e702dbcc1200b4 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/13887 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-03-05include/device/dram: Fix DDR3-1866Patrick Rudolph
The PLL multiplier value is off by one for DDR3-1866 due to a wrong TCK value, resulting in DDR3-1600 being used by the PLL. Needs test on real hardware ! Change-Id: I657b813889945f0d9990dd11680a3d3a25b53467 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13613 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05sandybridge/gma_lvds: support both Sandy&Ivy on one boardIru Cai
Sandy and Ivy Bridge processors use the same socket, and a mainboard with the socket can support both types of CPUs. However, they use different native graphics init code for LVDS and cause a crash if running the wrong code. This change detects the CPU type and then selects the right code to run. It will add some more code in ramstage. It also merges the {SANDY,IVY}BRIDGE_LVDS symbol to one SANDYBRIDGE_IVYBRIDGE_LVDS. Tested on a Lenovo T520 with i7-2630qm and i7-3720qm Signed-off-by: Iru Cai <mytbk920423@gmail.com> Change-Id: I4624759f9c92d56d547db1ab4b9a1d611a182a91 Reviewed-on: https://review.coreboot.org/12087 Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Tested-by: build bot (Jenkins)
2016-03-05Hide EC_GOOGLE_CHROMEEC_SPI_BUS.Vladimir Serbinenko
It's mobo architecture, not a user-adjustable setting. Change-Id: I8bb81638f391cf0ba880801e4707d8f0957897c8 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13906 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-05lz4_wrapper: Use __asm__ rather than asm.Vladimir Serbinenko
__asm__ is more robust to compilation flags. Change-Id: Ic7ca6e38ddd439dcfc4a62ef272ecea62416b4be Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13905 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-03-05Kconfig: hide useless options on ARM.Vladimir Serbinenko
Those options have no effect or lead to compile error on ARM due to fundamental incompatibilities. Add proper "depends on" clauses to hide them. Change-Id: I860fbd331439c25efd8aa92023195fda3add2e2c Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13904 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-04arch/x86: always use _start as entry symbol for all stagesAaron Durbin
Instead of keeping track of all the combinations of entry points depending on the stage and other options just use _start. That way, there's no need to update the arch/header.ld for complicated cases as _start is always the entry point for a stage. Change-Id: I7795a5ee1caba92ab533bdb8c3ad80294901a48b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13882 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-04arch/x86: rename reset_vector -> _startAaron Durbin
In order to align the entry points for the various stages on x86 to _start one needs to rename the reset_vector symbol. The section is the same; it's just a symbol change. Change-Id: I0e6bbf1da04a6e248781a9c222a146725c34268a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13881 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-03-03arch/x86: Allow soc/chipset to set linking addressAndrey Petrov
Until recently x86 romstage used to be linked at some default address. The address itself is not meaningful because the code was normally relocated at address calculated during insertion in CBFS. Since some newer SoC run romstage at CAR it became useful to link romstage code at some address in CAR and avoid relocation during build/run time altogether. Change-Id: I11bec142ab204633da0000a63792de7057e2eeaf Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13860 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit: rename _start -> _start16bitAaron Durbin
In order to avoid collisions with other _start symbols while grepping and future ones be explicit about which _start this one is: the 16-bit one only used by the reset vector in the bootblock. Change-Id: I6d7580596c0e6602a87fb158633ce9d45910cec2 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13880 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit/reset16: mark reset vector executableAaron Durbin
It's helpful to see the reset vector in objdump output. Without it being marked executable it doesn't get displayed. Change-Id: I85cb72ea0727d3f3c2186ae20b9c5cfe5d23aeed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13879 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-03-03cpu/x86/16bit/reset16: remove stale 32-bit jumpAaron Durbin
Patrick at least indicated this jump after the reset vector jump was a remnant from some construct used long ago in the project. It's not longer used (nor could I find where it was). Therefore, remove it. Change-Id: I31512c66a9144267739b08d5f9659c4fcde1b794 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13878 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-03-03drivers/intel/fsp2_0: Add utility functionsAndrey Petrov
This adds a set of utility functions that help load and identify FSP blobs. Change-Id: I1d23f60fd1dc8de7966142bcd793289220a1fa5e Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13797 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03drivers/intel/fsp2_0: Add coreboot<->FSP header filesAndrey Petrov
This adds important header files that specify calling interface between coreboot and FSP. Change-Id: I393601c91e3c3f630e0fc899f1140ecefed8ecba Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13796 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03nb/intel/sandybridge/raminit: Fill SMBIOS type17 infoPatrick Rudolph
Fill minimal info required for SMBIOS type 17. Report * DIMM size * channel * rank per DIMM * speed in Mhz * DIMM type * slot * manufacturer ID * serial Allows dmidecode to print the current RAM configuration. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 * Linux 4.3 * dmidecode 3.0 dmidecode output: Handle 0x0005, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Handle 0x0006, DMI type 17, 40 bytes Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 16 bits Data Width: 8 bits Size: 8192 MB Form Factor: DIMM Set: None Locator: Channel-1-DIMM-1 Bank Locator: BANK 0 Type: DDR3 Type Detail: Synchronous Speed: 1600 MHz Manufacturer: Unknown (cd04) Serial Number: None Asset Tag: Not Specified Part Number: F3-1866C9-8GSR Rank: 2 Configured Clock Speed: 1600 MHz Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown Change-Id: I4e5f772d68484b9cb178ca8a1d63ad99839f3993 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13852 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-03src/device/dram/ddr3: Parse additional informationPatrick Rudolph
Parse manufacturer id and ASCII serial. Required for SMBIOS type 17 field. Change-Id: I710de1a6822e4777c359d0bfecc6113cb2a5ed8e Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13862 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02nb/intel/sandybridge/romstage: Read fuse bits for max MEM ClkPatrick Rudolph
Instead of hardcoding the maximum supported DDR frequency to 800Mhz (DDR3-1600), read the fuse bits that encode this information. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I515a2695a490f16aeb946bfaf3a1e860c607cba9 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13487 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-02src/arch/x86/smbios: Add vendorsPatrick Rudolph
Add more manufacturer IDs for vendor: * GSkill * OCZ * Transcend Change-Id: Ic7df76b1310b2c1abea9c5d2d8fd688cb2a713b8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13863 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-03-02nb/intel/sandybridge/raminit: Make discover_timC_write non cyclicPatrick Rudolph
The code can't handle cyclic zero runs. Make sure it will never wrap around by setting the top-most bit to constant one. Fixes "Mini channel test failed (2)". Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: I55e610d984d564bd4675f9318dead6d6c1e288a3 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13853 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-03-01Skylake: Support Intel Speed Shift Technology based on configSubrata Banik
Intel Speed Shift Technology is a new mechanism that replaces Legacy P-state. ISST allows OS hints about energy/performance preference. H/W performs the actual P-state control (autonomous) 1. Optimization frequency seclection for low residency workloads, no longer a static knee point. 2. Optimized frequency selection for best energy to performance trade offs. 3. Kick down frequency (from idle) fpr best responsiveness while taking energy consumption init account. Coreboot's responsiblity is to configure MSR 0x1AA ISST_EN bits which will reflect in CPUID.06h:EAX[Bit 7] that driver checkes and enable HWP accordingly. BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu and verify HWP getting enabled/disabled using Intel P-state driver. Change-Id: I91722aa1077f4ef6c8620b103be3e29cfcd974e5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: aa7d004cb2e19047e4434e3e2544cf69393ce28f Original-Change-Id: Ie617da337babde7f196a7af712263e37f7eed56f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/313107 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Wenkai Du <wenkai.du@intel.com> Reviewed-on: https://review.coreboot.org/13835 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-03-01Skylake boards: Enabling HWP (hardware P state control)Subrata Banik
This patch provides config options to enable/disable Intel SST (Speed Shift Technology). BUG=chrome-os-partner:47517 BRANCH=None TEST=Booted kunimitsu/lars, verified HWP driver load successfully. CQ-DEPEND=CL:313107 Change-Id: I9419a754384f96d308a5ac2ad90bbb519edc296e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 5efb7978e9d3ca9a709a4793ad213423a1c3c45d Original-Change-Id: I328b074b4f56ebe3caa8952ce3df7f834c1cf40f Original-Signed-off-by: Robbie Zhang <robbie.zhang@intel.com> Original-Signed-off-by: Subrata Banik <subrata.banik@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/326650 Original-Tested-by: Wenkai Du <wenkai.du@intel.com> Original-Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-on: https://review.coreboot.org/13843 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29google/chell: Update DPTF configurationDuncan Laurie
Update the DPTF configuration for the chell mainboard: 1) Enable DPTF charger control, set max current to 1975mA according to the battery specification. 2) Enable charger effect on charger temp sensor in TRT 3) Set PL2 to 15W which is the same value configured in the CPU. BUG=chrome-os-partner:49859,chrome-os-partner:50306 BRANCH=glados TEST=build and boot on chell Change-Id: I644256b9596cc5295513c48f5e3a18e6ce8b0a6b Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: c19740a227f932bf80e9243341ec81763779719c Original-Change-Id: Icff5edc9d659bea6370ff8de1334ebf0983340da Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329187 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13842 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29google/chell: Update GPIOs for DVT2Duncan Laurie
Add new GPIOs for touchscreen enable and reset pins and define the one missing unconnected pin for GPP_E10. BUG=chrome-os-partner:50518 BRANCH=glados TEST=build and boot on chell DVT1 Change-Id: I565a742ff266ee65a5d33f052606fe77c24b6ac8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 32a890af8c32aa30adac256d2c4ceaeefa30bd0d Original-Change-Id: I16546d38cc4e926e169f61ae1843106d1e14936b Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/329297 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13841 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29vboot: Set S3_RESUME flag for vboot context if necessaryDuncan Laurie
If a platform does verification of the memory init step, and it must resume with the same slot that it booted from then it needs to set the vboot context flag when resuming instead of booting. This will affect the slot that is selected to verify and resume from. BUG=chromium:577269 BRANCH=glados TEST=manually tested on chell: 1) ensure that booting from slot A resumes from slot A. 2) ensure that booting from slot B resumes from slot B. 3) do RW update while booted from slot A (so the flags are set to try slot B) and ensure that suspend/resume still functions properly using current slot A. 4) do RW update while booted from slot B (so the flags are set to try slot A) and ensure that suspend/resume still functions properly using current slot B. Change-Id: I77e6320e36b4d2cbc308cfb39f0d4999e3497be3 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 4c84af7eae7b2a52a28cc3ef8a80649301215a68 Original-Change-Id: I395e5abaccd6f578111f242d1e85e28dced469ea Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/328775 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13834 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29skylake: Increase IGD stolen size to 64MBDuncan Laurie
The FBC hardware for skylake does not have access to the bios_reserved range so it always assumes 8MB is used and so the kernel will therefore need to avoid using the last 8MB of the stolen window. With the default stolen size of 32MB(-8MB) there is not enough space for FBC to work with a high resolution panel. Kernel reference: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=a9da512b3ed73045253afd778e40d4298f42905b BUG=chrome-os-partner:50396 BRANCH=glados TEST=build and boot on chell DVT Change-Id: I3049d7d9e7c551aad5b8fd1630d5fbd88ccb2692 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: fff1f4b35e23e77cdc72c5bcc290f199494cdbbb Original-Change-Id: If468cca5759a320f3cd2d7eb09f4bcc0117b24cb Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/328813 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/google/chell: provide configuration for all padsAaron Durbin
Instead of relying on power-on-reset values provide configuration for all pads. PAD_CFG_NC() was used for all pads which had no nets routed on the board. PAD_CFG_GPO(0) was used for pads which had nets routed on the board in order to terminate them. BUG=chrome-os-partner:50301 BRANCH=glados TEST=Built and booted chell. Suspended and resumed on EVT. Change-Id: I7960442d5c06f58a1b671cdefac71ef0bc3b0cd5 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Commit-Id: 6a167cd0a747402bfc3cc9b6fbaaceceda766ee9 Original-Change-Id: I519011b049235dc2a960939c0bed274252dbffa8 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/327835 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13831 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-29mainboard/intel/galileo: Enable USBLee Leahy
Enable the EHCI and OHCI controllers. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the USB flash drive * A USB keyboard can issue shell commands * The "drivers" command shows an EHCI and OHCI connection Change-Id: Iad9abced98d9b645e8b12fa0845c97260cf62a72 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13857 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-29soc/intel/quark: Reserve non-MMIO spaceLee Leahy
Adjust the memory map to allocate MMIO from non-memory addresses. TEST=None Change-Id: Icb6863665c466e8609af73eb9338165c7d6f46bf Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13856 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-29soc/intel/quark: Initialize some of the FADT base registersLee Leahy
Initialize the base addresses for: * Power management control * Power management status * Reset * Power management timer * General-Purpose Event 0 Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when: * Register address are properly displayed by the payload * "reset -c" performs a reset and reboots the system * "reset -w" performs a reset and reboots the system * "reset -s" performs a reset and turns off the power Change-Id: I9d043f4906a067b2477650140210cfae4a7f8b79 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13764 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-28northbridge/intel: add missing #include guardsIru Cai
I first found the missing of #include guards when I tried to include both sandybridge/gma.h and sandybridge/sandybridge.h, but sandybridge.h includes gma.h in it and gives a compile error. Change-Id: I13fdb8014b82e6065be2064137b7ea10062deaca Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/13775 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-26During DRAM initialization on certain ASpeed devices, an incorrectTimothy Pearson
bit (bit 10) was checked in the "SDRAM Bus Width Status" register to determine DRAM width. Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05. Change-Id: I05c3c7877015d95eb8d512f7410604b9af043b26 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13807 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-26nb/intel/sandybridge/raminit: Adjust timB to prevent overflowPatrick Rudolph
Improved version of I1a115a45d5febf351d89721ece79eaf43f7ee8a0 The first version wasn't well tested due to the lack of hardware and it was to aggressive. With timC being direct function of timB's 6 LSBs it's critical to match timC and timB. Some tests increments the value of timB by a small value, which might cause the 6bit value to overflow, if it's close to 0x3F. Increment the value by a small offset if it's likely to overflow, to make sure it won't overflow while running tests and bricks the system due to a non matching timC. In comparission to the first attempt, only 4 out of 128 timB values are considered bad. Needs test on real hardware ! Fixes a "edge write discovery failed" on my test system. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: If9abfc5f92e20a8f39c6f50cc709ca1cedf6827d Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13714 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-26tree wide: Convert "if (CONFIG_.*_TPM.*)" to "if (IS_ENABLED(...))"Denis 'GNUtoo' Carikli
Change-Id: Ib73abb0ada7dfdfab3487c005719e19f51ef1812 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: https://review.coreboot.org/13779 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-26mainboard/intel/apollolake_rvp: remove bootblock_mainboard_early_init()Aaron Durbin
Now that the SoC is configuring the UART pads there's no need to implement bootblock_mainboard_early_init(). Remove it and bootblock.c. Change-Id: I2ae7ea38351733e1c9757cde20b79e1d19d0c1e5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13794 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-26soc/intel/apollolake: implement bootblock_soc_early_init()Aaron Durbin
Provide a bootblock_soc_early_init() to that takes care of initializing the UART on behalf of the mainboard when serial console is enabled. Change-Id: I2d3875110b6f58a9e0b4c113084b85817aa05a87 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13793 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-26soc/intel/apollolake: provide function to set up uart pads and controllerAaron Durbin
Instead of pushing the same code into each mainboard for configuring the the UART pads and initializing the host contoller provide a function to perform all the actions on behalf of the mainboard. The set of pads configured is dictated by the CONFIG_UART_FOR_CONSOLE Kconfig option. Change-Id: I06c499c7ee056b970468e0386d4bb1bc26537247 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13792 Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-26lib/bootblock: provide SoC callback parity with mainboardAaron Durbin
There was no 'early' call into the SoC code prior to console getting initialized. Not having this enforces the mainboard to drive the setup of the console which typically just ends up calling into the SoC code. Provide a SoC early init call to handle this without having to duplicate the same code in mainboards utilizing the same SoC. Change-Id: Ia233dc3ae89a77df284d6d5cf5b2b051ad3be089 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13791 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-26soc/intel/appollolake: fix comment in gpio_defs.hAaron Durbin
GPIO_187 is the beginning of the Northwest community pads. Change-Id: I5565ecf534530144e80c65d886db11b53f38f935 Signed-off-by Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13789 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-02-26soc/intel/apollolake: group serial console options into one KconfigAaron Durbin
Add SOC_UART_DEBUG which does all the appropriate selection of the dependent Kconfig options for seral console. Also provide a default option of it being turned off instead of always selected. Change-Id: I1a6dba9c0072a17859c8f389709afe6fe3b04fac Signed-off-by: Aaron Durbin <adurbin@chormium.org> Reviewed-on: https://review.coreboot.org/13790 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-26lib/memrange: avoid shadow object declarationsAaron Durbin
Fix an error where a variable named 'free' was shadowing the function 'free'. src/lib/memrange.c:293:73: error: declaration of 'free' shadows a global declaration [-Werror=shadow] Change-Id: Ie57194b392f8f00ed4fd5c76dab27299b00ae293 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13788 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-25mc_tcu3: Enable graphic init codeWerner Zeh
The used Baytrail-M SoC on TCU3 tend to have issues with DisplayPort if the graphic power gate is not set up in coreboot. To avoid this error, use the graphic init code on this board. Change-Id: I973bbaa7d86c1ede1f2884b3a08ccb31f7d85087 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13774 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-25fsp_baytrail: Fix a possible hanging DisplayPortWerner Zeh
On some devices it can happen that DisplayPort TX lanes do not work properly if the power gate setup is omitted. If that happens, DisplayPort training will fail and therefore DisplayPort channel will not work. Both ports are affected. It seems that not every CPU shows this effect and those that are affected tend to fail more often in a cold environment. With this fix a board that originally shows this failure was running for over 1000 power cycles without issues. Change-Id: Ia266674490a1bee63a85b38d1dc949dcdf683cbc Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13743 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-25x86/Makefile.inc: Fix redundant addition of memlayout.ld in bootblockFurquan Shaikh
For C_ENVIRONMENT_BOOTBLOCK, memlayout.ld is added by call to early_x86_stage. Remove redundant addition of memlayout.ld in this case. Change-Id: Ibb5ce690ac4e63f7ff5063d5bd04daeeb731e4d7 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/13777 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-25cbfs: Fix compiler error for gcc versions < 4.6Werner Zeh
The missing braces for access to a union member cause an error on gcc versions < 4.6. Change-Id: I7de14a6d89219f5376f4f969adecfe8014a5a9d8 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13776 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-24commonlib/lz4_wrapper: Use correct casts to ensure valid calculationsPaul Menzel
Commit 09f2921b (cbfs: Add LZ4 in-place decompression support for pre-RAM stages) breaks building cbfstool with gcc (Debian 4.9.2-10) 4.9.2 in Debian 8.3 (jessie) with a 32-bit user space. It works fine in a 64-bit user space. ``` /home/joey/src/coreboot/src/commonlib/lz4_wrapper.c:164:18: note: in expansion of macro 'MIN' size_t size = MIN((uint32_t)b.size, dst + dstn - out); ^ /home/joey/src/coreboot/src/commonlib/include/commonlib/helpers.h:29:35: error: signed and unsigned type in conditional expression [-Werror=sign-compare] #define MIN(a,b) ((a) < (b) ? (a) : (b)) ^ ``` The problem is arithmetic on void*, so explicitly cast to the wanted types as suggested by user *redi* in #gcc@irc.freenode.net. Change-Id: I85bee25a69c432ef8bb934add7fd2e2e31f03662 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13771 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-23southbridge/intel/ibexpeak: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Remove the now unused bd82x6x/gpio.c. Needs test on real hardware ! Change-Id: Ibb54c03fd83a529d1ceccfb2c33190e7d42224d8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13616 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-23southbridge/intel/lynxpoint: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder, except for INTEL_LYNXPOINT_LP, which has it's own gpio code. Needs test on real hardware ! Change-Id: Iccc6d254bafb927b6470704cec7c9dd7528e2c68 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13615 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22cbfs: Add LZ4 in-place decompression support for pre-RAM stagesJulius Werner
This patch ports the LZ4 decompression code that debuted in libpayload last year to coreboot for use in CBFS stages (upgrading the base algorithm to LZ4's dev branch to access the new in-place decompression checks). This is especially useful for pre-RAM stages in constrained SRAM-based systems, which previously could not be compressed due to the size requirements of the LZMA scratchpad and bounce buffer. The LZ4 algorithm offers a very lean decompressor function and in-place decompression support to achieve roughly the same boot speed gains (trading compression ratio for decompression time) with nearly no memory overhead. For now we only activate it for the stages that had previously not been compressed at all on non-XIP (read: non-x86) boards. In the future we may also consider replacing LZMA completely for certain boards, since which algorithm wins out on boot speed depends on board-specific parameters (architecture, processor speed, SPI transfer rate, etc.). BRANCH=None BUG=None TEST=Built and booted Oak, Jerry, Nyan and Falco. Measured boot time on Oak to be about ~20ms faster (cutting load times for affected stages almost in half). Change-Id: Iec256c0e6d585d1b69985461939884a54e3ab900 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13638 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22urara: Increase bootblock sizeJulius Werner
The urara bootblock is less than a kilobyte from its limit (20K). There's more than enough space available so increase it to avoid impeding changes to core code. Also add some more automated checks to better model the platform's multiple windows into the same memory region and guard against accidental overlaps by a seemingly benign change to one window. Change-Id: I2e535b56d5d1748830ea1e70fd12fd9e87009bce Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13733 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22memlayout: Add symbols for stage boundsJulius Werner
Stages are inconsistent with other memlayout regions in that they don't have _<name> and _e<name> symbols defined. We have _program and _eprogram, but that always only refers to the current stage and _eprogram marks the actual end of the executable's memory footprint, not the end of the area allocated in memlayout. Both of these are sometimes useful to know, so let's add another set of symbols that allow the stage areas to be treated more similarly to other regions. Change-Id: I9e8cff46bb15b51c71a87bd11affb37610aa7df9 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13737 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22mainboard/intel/galileo: Enable minimal ACPI tablesLee Leahy
Enable the minimal ACPI tables. Initialize the FADT header and provide an empty DSDT. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful if: * Outputs multiple lines of debug serial text Change-Id: I2e30c8af2994c9f56d9ba4fe6bc35e133b1d2d6b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13759 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22soc/intel/quark: Add the initial pieces required for ACPI tablesLee Leahy
Enable ACPI tables TEST=None Change-Id: I38b90f54cd9b00b063557c08980e71851bf3059b Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13758 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-22fsp_baytrail: Add full support for iosf access in reg_scriptWerner Zeh
Add all needed functions to fsp_baytrail so that reg_script can do full iosf access. To keep it simple, this patch synchronises iosf access between baytrail and fsp_baytrail. Change-Id: Ic7f52d7d90c0fe3560fa5a5d96f7fc15062d66d1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/13742 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-22die() when attempting to use bounce buffer on non-i386.Vladimir Serbinenko
Only i386 has code to support bounce buffer. For others coreboot would silently discard part of binary which doesn't work and is a hell to debug. Instead just die. Change-Id: I37ae24ea5d13aae95f9856a896700a0408747233 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13750 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22qemu-armv7: Update running instructions.Vladimir Serbinenko
Change-Id: I04c0cfea5d49eb70969d6ad38d5cb81d70eeaf9b Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13753 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-22console: Add higher baud ratesLee Leahy
Enable baud rates of 230400, 460800 and 921600. Leave the default set to 115200. TEST=Build and run on Galileo at 921600. Change-Id: I8e3980f33665bc183b454cf97c68e297f1b0502c Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13755 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-21soc/*: fix uart's regwidth specification in cbtablesPatrick Georgi
coreboot passes information about the serial port implementation to payloads through a cbtables entry. We set the register width to 1 on most SoCs because that looked as good a default as any, but checking the uart structs they use, it's 4 for all of them. Change-Id: I9848f79737106dc32f864ca901c0bc48f489e6b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13746 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-02-20Fix qemu-armv7 memory mapVladimir Serbinenko
Old map does not work on recent qemu. New map puts coreboot to ROM, so it behave more like most real machines would. For details on this map see comment in memlayout.ld Change-Id: If1f3328b511daca32ba93da5a6d44402508b37e9 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13748 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-20nb/intel/sandybridge/raminit: Add XMP supportPatrick Rudolph
Some vendors store lower frequency profiles in the regular SPD, if the SPD contains a XMP profile. To make use of the board's and DIMM's maximum supported DRAM frequency, try to parse the XMP profile and use it instead. Validate the XMP profile to make sure that the installed DIMM count per channel is supported and the requested voltage is supported. To reduce complexity only XMP Profile 1 is read. Allows my DRAM to run at 800Mhz instead of 666Mhz as encoded in the default SPD. Test system: * Gigabyte GA-B75M-D3H * Intel Pentium CPU G2130 Change-Id: Ib4dd68debfdcfdce138e813ad5b0e8e2ce3a40b2 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13486 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-20emulation/qemu-power8: initial mainboard and arch commitRonald G. Minnich
This builds and produces an image. The next step is to get a 'halt' instruction into the boot block and then attach with qemu. I can't get the powerpc64le-linux-gnu-ld.bfd to recognize any output arch but powerpc. That makes no sense to me. Change-Id: Ia2a5fe07a1457e7b6974ab1473539c7447d7a449 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13704 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19nb/amd/amdmct: Add socket specific configuration for FM2Damien Zammit
Change-Id: I1088064e5f84fcabcd51e0eaaedfb5074f7fb2b5 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13709 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
2016-02-19nb/intel/sandybridge/raminit: Improve loggingPatrick Rudolph
Use printram() in more places and use printk() only where it makes sense. Remove spamming "MRd: %x <= %x\n". Use common syntax for timing output. Change-Id: I38965967a029994112d7ab63afd4d9968a7728c5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13414 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19soc/intel/quark: Use single ID value for HSUART1Lee Leahy
Use single ID value for HSUART1. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: I38eca247f151e67c2b243a8a3bb21d9d1f4603de Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13734 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-19cpu/qemu-power8: don't enable it for qemu-x86Patrick Georgi
Change-Id: I17ba5a85fecf08ab9970a57c7696525287bbc5a8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13745 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-02-19x86: add coreboot table entry for TSC infoAaron Durbin
The 8254 (Programmable Interrupt Timer) is becoming optional on x86 platforms -- either from saving power or not including it at all. To allow a payload to still use a TSC without doing calibration provide the TSC frequency information in the coreboot tables. That data is provided by code/logic already employed by platform. If tsc_freq_mhz() returns 0 or CONFIG_TSC_CONSTANT_RATE is not selected the coreboot table record isn't created. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed TSC is picked up in libpayload. Change-Id: Iaeadb85c2648587debcf55f4fa5351d0c287e971 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13670 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-19lib/coreboot_table: add function to allow arch code to add recordsAaron Durbin
Add lb_arch_add_records() to allow the architecture code to generically hook into the coreboot table generation. BUG=chrome-os-partner:50214 BRANCH=glados TEST=With all subsequent patches confirmed lb_arch_add_records() is called when a strong symbol is provided. Change-Id: I7c69c0ff0801392bbcf5aef586a48388b624afd4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13669 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-19RISC-V: Add more debug info to debug printksAndrew Waterman
Change-Id: I49292e69a5636c675bb8ed7cfe4462ca8189487e Signed-off-by: Andrew Waterman <waterman@cs.berkeley.edu> Reviewed-on: https://review.coreboot.org/13736 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-02-19RISC-V: Make inline asm usage saferAndrew Waterman
Change-Id: Id547c98e876e9fd64fa4d12239a2608bfd2495d2 Signed-off-by: Andrew Waterman <aswaterman@gmail.com> Reviewed-on: https://review.coreboot.org/13735 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-02-19power8: qemu "cpu"Ronald G. Minnich
Change-Id: Ib20d88bb208a605b6bf44e6bf7151c24a08549aa Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/13702 Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Tested-by: build bot (Jenkins)
2016-02-18soc/intel/quark: Enable HSUART1Lee Leahy
Enable HSUART1 for debug serial output. Specify the fixed resources in the UART driver. This keeps debug serial output flowing during the rest of the device initialization. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Debug serial output stays enabled after BS_DEV_RESOURCES state Change-Id: Ica02e5fece156b21d4a3889284ca467d55c7880d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13730 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Establish the Memory MapLee Leahy
Add ramstage.h to define some of the common header files used by the drivers in ramstage. Add northcluster.c, the driver for the memory controller, which defines the memory map. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * Memory map successfully displayed in BS_WRITE_TABLES state Change-Id: I8dc91119eaad0b7abc2e484d13ee708ba1253438 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13721 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18soc/intel/quark: Enumerate the PCI devicesLee Leahy
Add the chip and domain support which enables the display of the vendor and device IDs for the PCI devices. Testing on Galileo: * Edit src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The PCI vendor and device IDs are displayed. Change-Id: I517dcafd83c7dd850bc3471f939d6804a05020c3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13719 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18device: Add device path display supportLee Leahy
Add an optional routine to translate the device path types into a string for display. TEST=Build and run on Galileo Change-Id: Iea5d0a2430d9a8546105324e2beda0955210dca9 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13715 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18arch/arm64: Compile arm-trusted-firmware with coreboot timestampPatrick Georgi
Update ATF codebase to a version that supports passing a timestamp and fix the format to what it accepts now (including quotes). This provides reproducible builds. Change-Id: I12a0a2ba1ee7921ad93a3a877ea50309136ab1ab Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13726 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18intel/kunimitsu: Set USB Type A current limit to 2ANaresh G Solanki
The GPIO USB_A0_ILIM_SEL & USB_A1_ILIM_SEL should be low to enable 2A charging from the USB Type-A port. BUG=chrome-os-partner:50212 BRANCH=glados TEST=Build CB & booted kunimitsu, verified that USB_A0_ILIM_SEL & USB_A0_ILIM_SEL are at logic zero. Change-Id: I989987eaaa2015720bbb1403caf20b97a996e168 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 640834506ad749359104e24fdb664044d499fd5f Original-Change-Id: I741f79a69b78dbb7d4f8cb9718355d802b94b96d Original-Signed-off-by: Naresh G Solanki <Naresh.Solanki@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/327121 Original-Commit-Ready: Naresh Solanki <naresh.solanki@intel.com> Original-Tested-by: Naresh Solanki <naresh.solanki@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13722 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18acpi/tpm: Gracefully handle missing TPM module.Tobias Diedrich
When TPM support is enabled, verify the TPM_DID_VID field is not all zeroes or all ones before returning 0xf in the _STA method. This avoids these kernel errors when no module is installed: [ 3.426426] tpm_tis 00:01: tpm_transmit: tpm_send: error -5 [ 3.432049] tpm_tis: probe of 00:01 failed with error -5 Change-Id: Ia089d4232e0986b3bc635d346e68d982e8aecd44 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/13713 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@google.com>
2016-02-18nb/intel/sandybridge: Start PEG link trainingPatrick Rudolph
Issue observed: The PCIe Root port shows up in GNU/Linux but no PCIe device is being detected. Test system: * Gigabyte GA-B75M-D3H (Intel Pentium CPU G2130) * Lenovo T530 (Intel Core i5-3320M CPU) Problem description: The PEG Root port link training on Ivy Bridge needs to be manually started. Problem solution: The bits are set in early_init to meet PCIe reset timeout of 100msec. The bits should be set in PCI device enable function, but this causes the PCI enumeration to not detect the card, as it's still booting. Adding a fixed delay of 100msec resolves this problem, but this would increase boot time. Read the PCI base revision mask to make sure it's any IvyBridge CPU. Don't run the code on MRC path as it has its own PEG initilization code. Tested with: * Nvidia NVS 5400M (PCIe2) * ATI Radeon HD4780 (PCIe2) * Nvidia GeForce 8600 GT (PCIe1) Untested: * PCIe3 devices Final test results: The PEG device shows up under GNU/Linux and can be used without issues. Change-Id: Id8cfc43e5c4630b0ac217d98bb857c3308e6015b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/11917 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18southbridge/intel/bd82x6x/acpi: Fix IRQ warningsPatrick Rudolph
The PCIe slot uses Message Signaled Interrupts (MSI) as the IGD does and doesn't use hardware INT lines. Adding the IRQ entry for PEG slot fixes a warning showing up in GNU/Linux dmesg. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Change-Id: I5ac40e7bea9a659c6c89262aac4552bc8177a9e5 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13612 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-18southbridge/intel/bd82x6x: Use common gpio.cPatrick Rudolph
Use shared gpio code from common folder. Bd82x6x's gpio.c and gpio.h is used by other southbridges as well and will be removed once it is unused. Change-Id: I8bd981c4696c174152cf41caefa6c083650d283a Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13614 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18cpu/amd: Add socket FM2Damien Zammit
Change-Id: I397c908867fef7583063c8cad7b83ce53482529b Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13708 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-18lib: Add Kconfig to toggle boot state debuggingLee Leahy
Add the DEBUG_BOOT_STATE Kconfig value to enable boot state debugging. Update include/bootstate.h and lib/hardwaremain.c to honor this value. Add a dashed line which displays between the states. Testing on Galileo: * select DEBUG_BOOT_STATE in mainboard/intel/galileo/Kconfig * Build and run on Galileo Change-Id: I6e8a0085aa33c8a1394f31c030e67ab3d5bf7299 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13716 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Enable PCIe root port 0Lee Leahy
Enable PCIe root port 0 Testing on Galileo: * Add a 802.11 wireless card in the mini-PCIe slot * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing successful if: * After PCI 00:17.0, memory addresses are assigned to the 802.11 wireless card on PCI 01:00.0 during BS_DEV_RESOURCES state Change-Id: I68ea25b8e594480fe5146ffad75e293e346e9517 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13723 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17mainboard/intel/galileo: Disable the remaining PCI devicesLee Leahy
Add additional lines to the devicetree.cb file to disable the PCI devices in the Quark SoC. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * Devices show up as disabled in BS_DEV_ENUMERATE state or ramstage Change-Id: I1edbbcb88cef29ce972ef054c82e37bf07c3761d Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13720 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-17arch/x86: Add option to disable default mmap_boot implementationAlexandru Gagniuc
On certain platforms, the boot media is either not memory-mapped, or not mapped at the top of 4G. This makes the default mmap_boot implementation unsuitable. Add an option to allow such platforms to define their own mapping implementation. Change-Id: I8293126fd9cc1fd3d75072f7811e659765348e4a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13319 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-16nb/intel/sandybridge/raminit: Add shift offsetPatrick Rudolph
It looks like the falling timing was missing the shift offset. Not sure if this was intentional, I guess not. Tested on my hardware and produced no regressions. Test system: * Intel IvyBridge * Gigabyte GA-B75M-D3H Please test on real hardware ! Change-Id: Id8c60217093a48bf322f406ea258c10a02c936e8 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13682 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-16soc/intel/apollolake: bootblock: implement platform_prog_run()Andrey Petrov
Once bootblock copied romstage into CAR it may not jump into it right away. This is because we are in NEM mode, there is no backing store and a miss in L1 may cause L1D line snoop that gets written back. The solution is to flush L1D to L2 so snoop guaranteed to hit L2. Change-Id: I2ffe46dbfdfe7f0ccd38b34ff203ff76b6d5755b Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13703 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-16device/pci_rom: Rename missleading ON_DEVICE_ROM_RUNPatrick Rudolph
The Kconfig option "ON_DEVICE_ROM_RUN" suggests that PCI Option ROMs are run, but in fact it only controls the loading of PCI based Option ROMs. At the moment coreboot only executes Option ROMs if they are VGA Options ROMs and the VGA Option ROM execution flag is enabled. Setting ON_DEVICE_ROM_RUN with VGA Option ROM execution disabled has no effect. Clarify that this flag controls the loading behaviour and not the execution behaviour. Change-Id: Ie3e503cb145f9b7ce613755e60ac0f6c00f2bcdb Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/13684 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-16southbridge/intel/common: Add common gpio.cPatrick Rudolph
Add a common southbridge gpio code to reduce existing duplicated code. By adding it to ram-stage, GPIOs can be changed any time, without the need of direct register access. The files are based on bd82x6x and lynxpoint gpio.c. Change-Id: Iaf0c2f941f2625a5547f9cba79da1b173da6f295 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/12893 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-15skylake: Finalize SMM in corebootDuncan Laurie
Once we lock down the SPI BAR we need to tell SMM to re-init its SPI driver or it will be unable to write ELOG events via SMI. This SMI is also sent at the end of depthcharge so there was just a window where SMI events could get lost. BUG=chrome-os-partner:50076 BRANCH=glados TEST=enable DEBUG_SMI, boot to dev screen, press power button and see elog events get added without without transaction errors. Change-Id: I1f14717b5e7f29c158dde8fd308bdbfb67eba41a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 60ca24c760c70e2ebe5f3e68f95d3ffdba0fef9e Original-Change-Id: I4e323249f00954e290a6a30f515e34632681bfdd Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/326861 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13697 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-15skylake: Check for power failure when WAK_STS is not setDuncan Laurie
The PCH does not set PM1_STS[WAK_STS] bit when waking from a G3 state, which is triggered by hibernate now on chell when we do a PMIC shutdown. This means the checks for S5 wake are not done and instead it is logged as a wake from S0. BUG=chrome-os-partner:50076 BRANCH=glados TEST=pass firmware_EventLog test on chell Change-Id: I3ca05a4824df3401150a63d4b6555f759de40087 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: de6c9bac447edd06568193f990f1f4e278576783 Original-Change-Id: I4472498468d620fe69f2b68710e818a4ad287382 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/326888 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13696 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-15skylake: Enable DDI-A 4-lane support if GOP does not executeDuncan Laurie
This change will allow the kernel to use 4-lane eDP connections if the GOP driver does not execute and set this bit. If GOP has executed (everyone but Chrome OS verified mode) the link will already be up and this will do nothing. BUG=chrome-os-partner:50197 BRANCH=glados TEST=boot on chell and ensure 4 Change-Id: I9e2328b00db84f26b9bd03220b8ac0bd5f64cfbf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cff83e18ce9936c8d507f93c8443b7056c62e844 Original-Change-Id: I3f1e5d78b91eb0e4a23fcc196aff0edadc252a0c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/327251 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13690 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-15skylake: acpi: Make GRXS method serializedDuncan Laurie
This method creates a named object and should be serialized to avoid a compiler warning from recent iasl releases. BUG=chrome-os-partner:40635 BRANCH=glados TEST=emerge-chell coreboot with no iasl warnings Change-Id: If54df4eca8849a8d278816712164b30a775a41ca Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 9aa8c5627276be08bf0dc3d0f4b9b7bd3f40c227 Original-Change-Id: Ieb05525503bf61c9922677484aba5479856a3f35 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/326843 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13689 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-06 11:37:44 +0000