| Age | Commit message (Collapse) | Author |
|---|
|
Add defines for the Cave Creek and Rangeley LPC devices. These
chipsets will be added shortly. This file is outside of any of
the directories that will be touched by those additions, so it's
getting changed in its own commit.
Change-Id: Ia829282b2ad67eef09689858500bc7f93a1cd05b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5810
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The semicolon really shouldn't be in the include...
Change-Id: I90a0f516857365fddd21311cd703132af8d51007
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5808
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When trying to loop through all the devices in romstage, there was
no function to just go from one to the next.
This allows an easy way to go all the way down the chain of devices.
Change-Id: Id205b24610d75de060b0d48fa283a2ab92d1df0a
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/5732
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The 'm' (a memory reference) constraint makes little sense here since we
are talking about a fs relative read, rather 'ir' (immediate or
register) constraint is more sensible.
N.B. The 'p' constraint allows anything which fits the form of an address
calculation where the 'ir' constraint is just a register /xor/
immediate. Hence would produce better code here however, unfortunately,
clang does not currently support it properly.
The %b and %w constraints are also redundant and only hide errors.
The functions writefsword() and writefsdword() should use ir instead of
iq. iq is unnecessarily restrictive (it is only required for writing
bytes).
The cld in stosb is redundant (and the constraints are unnecessarily
complicated). Note that The ABI guarantees that the direction flag is
cleared. i.e. eax, ecx, edx are caller-saved, returned value in eax,
eax+edx, st0, yaddayadda, direction flag cleared. In fact bad things can
happen if you set it in some asm and do not clear it until the end of
the asm.
Line wrap these extraneously long lines found with these particular functions.
Many thanks to Christoph Mallon <christoph.mallon@gmx.de> from #llvm for
helping me with this.
Change-Id: Iaf3ad65791640e1060a2029e7ebb043f57b338a9
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The semantics of this loop relies on an integer overflow in Index >=0
that implies a return value of (UINT8)-1 which around wraps to 0xFF, or
VOLT_UNSUPPORTED.
Change-Id: I44d68973d0a80093350b2a8a4d3b46bfbb57917a
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5801
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
These are not local headers.
Change-Id: Ie0b0a682565a08dbfa089986dc7860fdb0846949
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5796
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
The typedef'ed BIT_FIELD_NAME enum is type unsigned. The parameter
'FieldName' is decleared with type BIT_FIELD_NAME and thus the redudant
comparison of unsigned enum expression >= 0 is always true.
BIT_FIELD_NAME is declared in vendorcode/amd/agesa/f14/Proc/Mem/mm.h
Change-Id: Id2f03596c44b68e861e939f3528256d4b08c45ce
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5757
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
The conditional comparison in the for-loop construct with the constant
300000 has an index incrementor of type 'UINT16' (aka 'unsigned short')
which is always true.
Change-Id: I932c168742163be4038728fb40833231a447fa78
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5799
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
- Duplicate declaration of GetFspReservedMemoryFromGuid
- Corrupt line that was only compiled for a southbridge that no
board in coreboot currently uses.
(thanks for Mike Hibbett <mhibbett@ircona.com> for pointing this out)
Change-Id: I847e807272acbaa93c87a89c0d2f94829c9121e6
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Reviewed-on: http://review.coreboot.org/5798
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Change-Id: I29037c322dac5ed9ebc36b95bc1981acf21e5bd0
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5778
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These NIC stub drivers were to initialize the Gigabit Ethernet adapters
just enough to keep coreboot from trying to execute an option ROM.
However this is no longer required as non-VGA option roms are not ran;
See:
b32816e Remove PCI_ROM_RUN option
Change-Id: Idc44619767c631c5fcf550a5948c8947bde5e218
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5777
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The function GfxPowerPlayLocateTdp() sets MinDeltaSclk to a maximum
sentinel value and checks DeltaSclk in a loop to minimize MinDeltaSclk.
However, MinDeltaSclk incorrectly self-assigns.
Change-Id: Id01c792057681516bba411adec268769a3549aa8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5752
Tested-by: build bot (Jenkins)
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Change-Id: I31632948ce69b2d1ff63b6c920016ed6fdf9e2f8
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5760
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: I1d801b9d8387e267feeb95563e55910b30ebbc34
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Remove global variables uma_memory_base and uma_memory_size
from builds with via/vx900 northbridge, as these variables can be kept
within the chipset.
Change-Id: I9f8aea4836d81e704eae6a0f2cefc7fd4586b8b8
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5721
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Remove use of global variables uma_memory_base and uma_memory_size
from builds with Intel northbridges, as these variables can be kept
within the chipset or even as stack locals.
Intel platforms have no functional implemenation for option GFXUMA.
If we did implement some choice between external and integrated graphics,
it needs to be named in less obscure fashion.
Change-Id: I12f18c4ee6bc89e65a561db6c2b514956f3e2d03
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
We no longer need these globally. Guard them so we get to declare
static replacements at few locations until complete removal.
Change-Id: Ie33e2a680fc9bbb7e28c8fbe17e5181e626736a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5718
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
After moving out -m32 from CC_*, 64bit compilers need
CFLAGS_* in more places to handle everything in 32bit
as appropriate.
Change-Id: I692a46836fc0ba29a3a9eb47b123e3712691b45d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5789
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
They don't exactly add clarity, but increase the risk
they're used at some obscure place.
Change-Id: Ic74f72dae3f9b7eb2343cb5c51bc44c888e1276c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5787
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
They're _not_ part of the compiler binary, so they have
no place in $(CC_*)
Change-Id: I1e1c3c0be6f75629450a824ea834e1614d48ed9b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5785
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
With the upcoming CC/CFLAGS/CPPFLAGS split,
romcc gets more CPPFLAGS, and it's picky about
directories actually existing.
Change-Id: Ib9c525296e5be0c8ace935ab8096bc98206cbcc1
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5784
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Some size_ts were considered long int and some compilers
are picky about that.
Change-Id: I671daa18eb3bfa2a7defc120e77bbb1ef72bd417
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5788
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This defines new board_info entry 'Vendor name' to be displayed in place of, or
in addition to, the CONFIG_VENDOR string 'Google'.
Also flag these as flashrom accessible SPI without socket. Instructions to
disable flash write-protection can be found at Chromium developer documentation.
Change-Id: I69791a091417a80d01e0ba2c6462417730a07be0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5750
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
While at it, fix frontrunner-af board URL.
Change-Id: I3b631830d679abc20f8a72411f2402689d9f9aac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5706
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Jens Rottmann <JRottmann@LiPPERTembedded.de>
|
|
Change-Id: Idd74893c1fc3d0818d00c1f727c9fdc27168af0c
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5782
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Trips up clang builds with a warn treated as error.
Change-Id: I9c0e2930ba8a60c7ad6063e9826b1b8638185505
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5779
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
When the system is started with dock, the serial port works.
As soon as the laptop is undocked and redocked, the serial port
no longer works. See below superiotool dump snippet:
Upon bootup: SIO @ 0x2e
LDN 0x03 (COM1)
idx 30 60 61 70 71 74 75 f0
val 01 03 f8 04 03 04 04 02
Redocked: SIO @ 0x2e
LDN 0x03 (COM1)
idx 30 60 61 70 71 74 75 f0
val 00 03 f8 04 03 04 04 02
Since the function dock_connect is executed every time the
dock is reconnected, starting without a dock and then attaching
it to a dock is now also fixed.
Change-Id: Ibd97589a8c743673a55e382a5db2ba62656c595e
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/5761
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This drops the scan-build related Kconfig options
since it's now possible to simply run
scan-build [-o outdir] make
and get coreboot built with its report.
There's also no inner make process anymore, and the way
things work should be clearer now.
Also adapt abuild to this new reality.
Change-Id: I03e03334761ec83f718b3235ebf811834cd2e3e3
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5774
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Having more than the executable in $(CC) only leads to
trouble in a number of situations.
Change-Id: I7642ca4068b3a3bd5798219d74de9e0eb85bb4e5
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5769
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
No need to first define X86_32 and then replace every
single use of it with its lower cased equivalent.
Just start out with the lower case versions in the first
place.
Change-Id: I1e771ef443db1b8d34018d19a64a9ee489cd8133
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5767
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There are a couple of places where CPPFLAGS are
pasted into CFLAGS, eliminate them.
Change-Id: Ic7f568cf87a7d9c5c52e2942032a867161036bd7
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5765
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rename INCLUDES to CPPFLAGS since the latter is more
commonly used for preprocessor options.
Change-Id: I522bb01c44856d0eccf221fa43d2d644bdf01d69
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5764
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There's no need to state the dependency twice.
Change-Id: Ia241d441211c6f476d0a6ed7589b038f7a220265
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5633
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Apply the SOC thermal settings from DPTF reference code for
SdpProfile=4 and adjust graphics PUNIT setting to match.
BUG=chrome-os-partner:17279
BRANCH=baytrail
TEST=boot on rambi and check for valid GPU power values from DPTF
Change-Id: I59fc4b75b52084ebcc4c0556563afca0585ea6b8
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182786
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5052
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Enable the config options to have the device enumeration layer configure
common clock and ASPM for endpoints.
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on rambi, check PCIe for ASPM and common clock:
lspci -vv -s 0:1c.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
lspci -vv -s 1:00.0 | grep LnkCtl:
LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
Change-Id: I2477e3cada0732dc71db0d6692ff5b6159ed269f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182860
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5051
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Though the limited documentation indicates the default is
0 for the gfx_turbo_disable bit, in practice that isn't
true. Knock down the gfs_turbo_disable bit to enable
graphics turbo mode.
BUG=chrome-os-partner:25044
BRANCH=baytrail
TEST=Built and booted. Added debug code to output SB_BIOS_CONFIG.
Noted that bit 7 was set to 0.
Change-Id: I11210c6a0b29765cb709a54d6ebd94211538807b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182640
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5050
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The Codec and ALS both have interrupt sources that can be configured.
The ALS kernel driver currently does not try to use it but the codec
driver does for things like jack detect.
ACPI Devices are added, but as with other ACPI devices the HID may
need to be updated once more official strings are decided.
BUG=chrome-os-partner:24380
BRANCH=baytrail
TEST=manual: build and boot on rambi and check for functional lightsensor
Change-Id: Ib51a2aaf32d5597926fcbe9183947e9ac53e1468
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182366
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5049
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On baytrail, it appears that the turbo disable setting is
actually building-block scoped. One can see this on quad
core parts where if enable_turbo() is called only on the
BSP then only cpus 0 and 1 have turbo enabled. Fix this
by calling enable_turbo() on all non-bsp cpus.
BUG=chrome-os-partner:25014
BRANCH=baytrail
TEST=Built and booted rambi. All cpus have bit 38 set to 0
in msr 0x1a0.
Change-Id: Id493e070c4a70bb236cdbd540d2321731a99aec2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182406
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5048
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
This will allow USB devices to wake the system (if 5V is not turned off)
and the controller to enter D3 at runtime. (if autosuspend is enabled)
BUG=chrome-os-partner:23629
BRANCH=baytrail
TEST=build and boot on baytrail
1) with modified EC to leave 5V on in S3 ensure that waking from suspend
with USB keyboard works.
2) with laptop-mode-tools usb autosuepend config updated see that device
enters D3 at runtime when no external devices attached.
Change-Id: Ia396d42494e30105f06eb3bd65b4ba8b1372cf35
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182536
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5046
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
In order to support probing I2C devices when the controller is
in ACPI mode the mainboard needs to decalre them in the proper
scope with the address/interrupt information. The touchpad devices
are ATML0000/ELAN0000 and the touchscreen is ATML0001 so they can
be distinguished in userland scripts based on ID. There is also
a special "ISTP" node that indicates whether the devices is a
touchpad (=1) or touchscreen (=0) in case this is useful to drivers.
These names may not be final but they are a starting point and can
be easily changed.
Atmel devices also have a bootloader mode which needs to be
declared as a separate device. Unfortunately it does not work as
expected to have multiple I2cSerialBus() resources declared in a
single device and have it select properly, even with the use of
StartDependentFn(), so bootloader devices are declared separately.
The original devices are left in \_SB scope and are only enabled
if the I2C controllers are in PCI mode. The new devices are only
enabled if the I2C controllers are in ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=baytrail
TEST=manual
1) Ensure there is no change in functionality by default and that
the devices are still probed by chromeos_laptop in the kernel.
2) Enable lpss_acpi_mode=1 in devicetree.cb and kernel changes to
add _HID entries for devices in appropriate drivers. Ensure that
the devices are probed successfully. Further changes are needed
to the chromeos-touch-firmware scripts to load config and update
firmware based on the new ACPI _HID entries.
3) Put touchpad in bootloader mode (by flashing bad firmware) and
ensure that it is detected at address 0x25 and the firmware is
able to be updated.
Change-Id: I5b9b47ddc94474a677497271e963f62cb09438e0
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182259
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5045
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
The current byte value was being converted to an int
when checking against literal 0xff. As the type of
the current pointer was char (signed) it was sign
extending the value leading to 0xffffffff != 0xff.
Fix this by using an unsigned type and using a
constant type for expected erase value.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmwareupdate. Noted that MRC
cache doesn't think the erased region isn't erased.
Change-Id: If95425fe26da050acb25f52bea060e288ad3633c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182154
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5044
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
On a firmware update the MRC cache is destroyed. On the
subsequent boot the MRC region was attempted to be erased
even if it was already erased. This led to spi part taking
longer than it should have for an unnecessary erase
operation. Therefore, check that the region is erased
before issuing the erease command.
BUG=chrome-os-partner:24916
BRANCH=baytrail
TEST=Booted after chromeos-firmeareupdate. Noted no
error messages in this path.
Change-Id: I6fadeb6bc5fc178abb0a7e3f0898855e481add2e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182153
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5043
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Nothing can actually use this as the EC cannot speak
using baytrail's SERIRQ protocol. Also, the voltage
bridge is going away so nothing will be hooked up to it.
Therefore disable this it.
BUG=chrome-os-partner:24693
BRANCH=rambi
TEST=Built and booted.
Change-Id: I406bb9c227578ec0a75eaf67143b3b27cb7880ae
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182082
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5042
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Change-Id: Icc12aafc1462c08bca77a1798d4fae86b8250708
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5748
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Tested-by: build bot (Jenkins)
|
|
Fix build regression introduced in:
a823f9b mainboard/lenovo: Add Lenovo Thinkpad T520 support
Change-Id: I60d92f8cceda6427f43e6be9d78c2af82af4b061
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5738
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Problem with UMA region allocation was fixed when MTRRs changed to use
memrange implementation.
Change-Id: I420dac30de2836a91596d81f88bb45b46f248532
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5719
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Short list of known issues for this patchset:
* Suspend/Resume - does not work
* Combi pci card for SD/MMC card reader with IEEE1394 - not found
* Shutdown - sometimes does not work as expected
* At least mysterious harddrive i/o
Change-Id: Iaba8d1f5e471cfeca20d82f4e1b416641e1f2ae9
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/5672
Tested-by: build bot (Jenkins)
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
|
|
Used by the Lenovo ThinkPad T520
Change-Id: I1009616cc4c18ebd0e3be7ceb50398617b49e3a3
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: http://review.coreboot.org/5671
Reviewed-by: Idwer Vollering <vidwer@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Include C0 microcode drop.
BUG=None
BRANCH=rambi,squawks
TEST=Built. Booted B3 part.
Change-Id: If454658235cd5a7b8640de0b3fa12dccddb0e9f6
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182080
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5041
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This improves boot time in 2 ways for a firmware upgrade:
1. Normally MRC would detect the S0 state without an MRC cache
even though it's told to the S5 path. When it observes this
state a cold reset occurs. The cold reset stays in S5 for
at least 4 seconds which is time observed by the end user.
2. As the EC was running RW code before the reset after firmware
upgrade it will still be running the older RW code. Vboot will
then reboot the EC and the whole system to put the EC into RO
mode so it can handle the RW update.
The issues are mitigated by detecting the system is in S0 with
no MRC cache and the EC isn't in RO mode. Therefore we can do the
reboot without waiting the 4 secs and the EC is running RO so
the 2nd reboot is not necessary.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Booted. Updated firmware while in OS. Rebooted. Noted the
EC reboot before MRC execution.
Change-Id: I1c53d334a5e18c237a74ffbe96f263a7540cd8fe
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182061
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5040
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It's helpful to have a generic function that will tell
the EC to reboot if the EC isn't running a specified
image. Add that and implement google_chromeec_early_init()
to utilize the new function still maintaing its semantics
of if recvoery mode is enabled the EC should be running its
RO image. There is a slight change in that no communication
is done with the EC if not in recovery mode.
BUG=chrome-os-partner:24133
BRANCH=rambi,squawks
TEST=Built and boot with recovery request. Noted EC reboot.
Change-Id: I22240f6a11231e39c33fd79796a52ec76b119397
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182060
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5039
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Added a method in each temp sensor to disable the aux trip points
and then a wrapper function to call this method for each enabled
temperature sensor.
The event handler function is changed to not use a switch statement
so it does not need to be serialized. This was causing issues
with nested locking between the global lock and the EC PATM mutex.
Some unused code in temp sensors that was added earlier is removed
and instead a critical threshold is specified in _CRT.
The top level DPTF device _OSC method is expanded to check for the
passive policy UUID and initialize thermal devices. This is done
for both enable and disable steps to ensure that the EC thermal
thresholds are reset in both cases.
Additionally the priority based _TRT is specified with TRTR=1.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and start
esif_uf application. Observe that temperature thresholds are set
properly when running 'appstart Dptf' and that they are disabled
after running 'appstop Dptf'
Change-Id: Ia15824ca42164dadae2011d4e364b70905e36f85
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182024
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5037
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Set critical temperature thresdholds to 70C. This will cause DPTF
framework to shut down the system so it may need to be higher or
lower but will need some testing.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, start DPTF framework and observe it
using specified critical thresholds.
Change-Id: Ibbf6d814295eb5ff006cb879676b7613f5eb56a3
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182025
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5038
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PATx methods will be passed a temperature in deci-kelvin,
so it needs to be converted back to kelvin before being sent
to the EC.
The PAT disable method is changed to take the temperature ID
as an argument so individual sensors can be disabled.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi, load esif_lf kernel drivers and
esif_uf userspace application. Start and stop DPTF and see
that temperature thresholds are set to sane values.
Change-Id: Ieeff5a5d2d833042923c059caf3e5abaf392da95
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/182023
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5036
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When an EC thermal event occurs call the DPTF thermal threshold
event handler to handle notifications.
Change-Id: Ica928790bb478fccf8a46afef4eb7800589518b2
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5726
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Remove some unused functions from CPU participant that were
confusing the userland component since the CPU does not have
an ACPI managed sensor.
- Guard the charger participant with an ifdef so it can be
left out if not supported.
- Use the EC methods for setting auxiliary trip points and for
handling the event when those trip points are crossed.
- Add _NTT _DTI _SCP methods for thermal sensors. I'm not
clear if these are required or not but they seem to be expected
by the other DPTF framework components.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and load ESIF framework
Change-Id: I3c9d92d5c52e5a7ec890a377e65ebf118cdd7087
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181662
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5028
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The EC now supports two auxiliary programmable trip points for
thermal monitoring. These are expected to be used by DPTF and
need to be exported.
In order to support these the header was updated from the latest
chrome ec source.
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi
Change-Id: I257d910daac4e36280c0cecf4129381a32ffcb9a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181661
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5027
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
- Add passive thresholds for thermal participants
- Disable the charger participant and remove from _TRT
BUG=chrome-os-partner:17279
BRANCH=rambi
TEST=build and boot on rambi and start ESIF framework
Change-Id: Ie5917413aceadee6e39594257aaafb0bcb399d09
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181663
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5029
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SMI on TCO timer timeout policy was copied from other
chipsets. However, it's not very advantageous to have
the TCO timer timeout trigger an SMI unless the firmware
was the one responsible for setting up the timer.
BUG=chromium:321832
BRANCH=rambi,squawks
TEST=Manually enabled TCO timer. TCO fires and logged in
eventlog.
Change-Id: I420b14d6aa778335a925784a64160fa885cba20f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181985
Reviewed-on: http://review.coreboot.org/5035
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The PMC in baytrail maintains an additional set
wake status in memory-mapped registers. If these
bits aren't cleared the device won't be able to
go to S5 or S3 without being immediately woken up.
Therefore clear these registers.
BUG=chrome-os-partner:24913
BRANCH=rambi,squawks
TEST=Ensured PRSTS bit 4 is cleared after a reboot and S3 and S5 work
correctly.
Change-Id: I356e00ece851961135b4760cebcdd34e8b9da027
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181984
Reviewed-on: http://review.coreboot.org/5034
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
When CONFIG_ELOG is selected the reset, power, and wake
events are logged in the eventlog.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Various resets and wake sources. Interrogated eventlog
to ensure results are expected.
Change-Id: Ia68548562917be6c2a0d8d405a5b519102b8c563
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181983
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5033
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The memory reference code doesn't maintain some of
the registers which contain valuable information in order
to log correct reset and wake events in the eventlog. Therefore
snapshot the registers which matter in this area so that
they can be consumed by ramstage.
BUG=chrome-os-partner:24907
BRANCH=rambi,squawks
TEST=Did various resets/wakes with logging patch which
consumes this structure. Eventlog can pick up reset
events and power failures.
Change-Id: Id8d2d782dd4e1133113f5308c4ccfe79bc6d3e03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181982
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5032
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The C0 part uses a new cpuid.
BUG=None
BRANCH=squawks,rambi
TEST=None.
Change-Id: Iddf1bc4d6f7bbec3ca92bff8edf613e00a4b4286
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181980
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5031
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
KBD_IRQ# is moved to GPIO SC101, with SC50 going back to its original
SERIRQ function.
Note that this change breaks Rambi 1.5 keyboard functionality.
BUG=chrome-os-partner:24424
TEST=Manual on Rambi 2.0. Verify KB functions in OS with SC50 / SERIRQ KB
interrupt toggling removed from EC code.
BRANCH=Rambi, Glimmer, Clapper
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Change-Id: I3fa40441741ea9d52a6e2ff15925570510b5b82b
Reviewed-on: https://chromium-review.googlesource.com/181757
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Randall Spangler <rspangler@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5030
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I7d0e8d2119a470428cfc01c0738b8988ab75ba2d
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5624
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: If7141112ea67071ee05c52f455c3b2496aa7e17e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5622
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
While backing out the empty pc80 keyboard struct we encountered some
special cases where chip.h is used for other purposes. Deal with these
cases.
Change-Id: Ib11a46cfd14d050d5daa213623b9d8a401c06410
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5621
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This is a empty struct that has propagated through the superio's & ec's
but really does nothing. Time to get rid of it before it adds yet more
cruft. However, since this touches many superio's at once we do this in
stages by first changing the function type to be a pure procedure.
Change-Id: Ibc732e676a9d4f0269114acabc92b15771d27ef2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5617
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
We should configure i8254/i8259 down in to the southbridge rather than
romstage of every AGESA/CIMx board much like Intel boards do.
Change-Id: Id7c4f0baa0819d52aef9b0ee03c20d0fa16b9352
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5669
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The SoC needs to provide a 32k clock signal SUSCLK for
some modems to work properly, so this enables the signal.
BUG=chrome-os-partner:24425
TEST=Manual, check SUSCLK pin with a scope.
Change-Id: Ibc0d5bb38a2c3e16f381dfc256097fdced67fd1c
Reviewed-on: https://chromium-review.googlesource.com/180101
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Tested-by: Bernie Thompson <bhthompson@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5722
Reviewed-by: Aaron Durbin <adurbin@gmail.com>
Tested-by: build bot (Jenkins)
|
|
eMMC CLK was incorrectly configured as PULL_UP, but should have been
PULL_DOWN. 2K pulls somehow masked this problem.
BUG=chrome-os-partner:24353
TEST=Verify eMMC is bootable on Rambi on boards that previously failed
with an all-20K, all-PU eMMC pin configuration.
BRANCH=None
Change-Id: I0cbb6ebbb6818f83402b99330728266b09a0f5d6
Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/181034
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5026
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The BISOC.EXIT_SELF_REFRESH_LATENCY field should
not be updated from the default.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I6e701a520513372318258648e998dd8c7ab29ea4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180730
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5025
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Rambi's reference code will live at slot 3 in the
verified firmware section.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. Verified correct area where
reference code was loaded from.
Change-Id: I8bee46600429ac8f732fe334852f69aff1324150
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180027
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5024
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
When employing vboot firmware verification the reference
code loading should load from the verified firmware
section. Add this ability.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted rambi. Noted firmware being loaded
from rw verified area. Also noted S3 resume loading
from cached area.
Change-Id: I114de844f218b7573cf90107e174bf0962fdaa50
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180026
Reviewed-by: Shawn Nematbakhsh <shawnn@chromium.org>
Reviewed-on: http://review.coreboot.org/5023
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The kernel iosf driver uses HID INT33BD to probe and
be provided the 12 bytes in PCI for access.
BUG=chrome-os-partner:17279
BRANCH=none
TEST=build and boot on rambi, load iosf_mbi driver and
verify that it gets address 0xe00000d0
Change-Id: I865eafe664f00f21d1ebb967c291083830d895b9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180098
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5021
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Not used currently on rambi board. Disable in case it
saves power.
BUG=chrome-os-partner:23862
BRANCH=none
TEST=build and boot on rambi
Change-Id: Idb870c2cfa88cb6c3f1ada3caf0db566e33ec1eb
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/180084
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5020
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
With the ACPI GNVS exported and depthcharge changed to
initialize eMMC in ACPI mode we can now put the SCC
devices into ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot on rambi, test eMMC and SD card
Change-Id: I39716198f8227c0c3293ac23eb09660792e2c51b
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179901
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5018
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Make sure reg_script is executed before the device is put into
ACPI mode.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi from eMMC in ACPI mode
Change-Id: I4090babbfc7fb0f3be4da869386e998d87a513ba
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179896
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5017
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Since this file will get added to payloads it is useful if it
exports what offset in NVS it lives.
BUG=chrome-os-partner:24380
BRANCH=none
TEST=build and boot rambi with emmc in ACPI mode
Change-Id: I52860980c91dfe2525628e142b34ca192e69b258
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179848
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5014
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Make use of the ITE common Super I/O framework and there-by removing any
hard coding of Super I/O base address.
Change-Id: I14af89d2727d7c6bac0f9840043c430726297429
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5717
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Following the reasoning of:
cf7b498 superio/fintek/*: Factor out generic romstage component
Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5585
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
Provide devicetree.cb RAMstage configuration of this superio component.
Change-Id: I376d2fb6dafc301cbc437518012f8c43b0af4be2
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5668
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
|
|
No need to pass CPP down to SeaBIOS, it's not
architecture specific and they define their own
variable.
Change-Id: I811aaf3929fa11cc01b7f168ccd310008e21e60c
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/5715
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Remove arch-level Kconfig menu option as it shows all available architectures in
make menuconfig. Instead pull the bootblock options for choice and update image
to top-level Kconfig since it is already present for both x86 and arm.
Change-Id: Iab9c4539f05cd54a7f751565fefcaf7b6f0edc86
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: http://review.coreboot.org/5673
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
|
Lines with 'select SERIAL_CPU_INIT' where redundant with the
default being yes. Since there is no 'unselect SERIAL_CPU_INIT'
possibility, invert the default and rename option.
This squelches Kconfig warnings about unmet dependencies.
Change-Id: Iae546c56006278489ebae10f2daa627af48abe94
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/5700
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Turn on WDT support in the devicetree. Turn off CIR support.
Dispense with old commentary.
Change-Id: Icf0c0e12a0ed7ce6c3b6176653e076ffc2ba937e
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5698
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Turns out there are a few minor differences of the LDN's in the AD rev.
of this Fintek chip. 0x07 is in fact the WDT so renaming and remove the
now incorrect io mask. Add missing CIR LDN functionality and touch up
src inline doc.
Change-Id: I440aebad71d62d199d3283dd061933e76b21dda5
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5696
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
In order to use the same reference code on S3 resume
that was booted the program needs to be cached. Piggy
back on the ramstage cache to save the loaded reference
code program.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed. Noted locations of reference
code caching and load addresses in console.
Change-Id: I90ceaf5697e8c269c3244370519d4d8a8ee2eb4a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179777
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5013
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
To prepare for caching reference code for S3 resume the
ramstage cache needs to be accesible in ramstage as well.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I4c825c965b98cd71ea0eb9c93fe168a358da4c97
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179776
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5012
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Allow ramstage cache to be used from ramstage proper. Also
add a helper function for checking validity of ramstage
cache structure.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: If1f2ad1bcf64504b42e315be243a12432b50e3d5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179775
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5011
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Certain code paths want to know if S3 resume is
happening. However, the current baytrail code doesn't
note S3 resume early enough. Therefore, mark S3
resume just after pattr setup.
BUG=chrome-os-partner:22867
BRANCH=None
TEST=Built and booted. S3 resumed.
Change-Id: I5e5cc285940e4567521afb8483614ce6f813ddde
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179774
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5010
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The inclusion of reg_script_run_on_dev() allows
for removing some of the chained reg_scripts just
to set up the device context. Use the new reg_script
function in those cases.
BUG=None
BRANCH=None
TEST=Built and booted. Didn't see any bizarre dmesg or coreboot
console output.
Change-Id: I3207449424c1efe92186125004d5aea1bb5ba438
Signed-off-by: Aaron Durbin <adurbin@chromium.og>
Reviewed-on: https://chromium-review.googlesource.com/179541
Tested-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5009
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
According to the reference code all these registers
need to be set to their best known values.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake. No idea about
observable impact yet.
Change-Id: I0e31505a165eee1d177e5d726edcfa6947430476
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179749
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5008
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There's a slew of ports required to initialize baytrail's
perf and power values. Therefore, add the necessary
functionality in the iosf module as well as the reg_script
library.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted.
Change-Id: Id45def82f9b173abeba0e67e4055f21853e62772
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179748
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5007
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The iosf access functions already use some common code,
however there is a duplication for setting up the proper
control register for port and opcode. Introduce macros
to remove this verbosity.
BUG=chrome-os-partner:24345
BRANCH=None
TEST=Built and booted. Suspend and wake.
Change-Id: I5bad7e2a11fa8e8bd4a3d7fa53d917b2565644f8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179747
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5006
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The reg_script library has proven to be useful. It's
also shown that many scripts operate on devices. However,
certain code paths run the same script on multiple,
but different, devices. In order to make that easier
introduce reg_script_run_on_dev() which takes a device
as a parameter. That way, chained reg_scripts are not
scrictly needed to run the same script on multiple devices.
BUG=None
BRANCH=None
TEST=Built.
Change-Id: I273499af4d303ebd7dc19e9b635ca23cf9bb2225
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179540
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/5005
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This adds the option to put LPSS and SCC devices into ACPI mode
by saving their BAR0 and BAR1 base addresses in a new device
NVS structure that is placed at offset 0x1000 within the global
NVS table.
The Chrome NVS strcture is padded out to 0xf00 bytes so there
is a clean offset to work with as it will need to be used by
depthcharge to know what addresses devices live at.
A few ACPI Mode IRQs are fixed up, DMA1 and DMA2 are swapped and
the EMMC 4.5 IRQ is changed to 44.
New ACPI code is provided to instantiate the LPSS and SCC devices
with the magic HID values from Intel so the kernel drivers can
locate and use them.
The default is still for devices to be in PCI mode so this does
not have any real effect without it being enabled in the mainboard
devicetree.
Note: this needs the updated IASL compiler which is in the CQ now
because it uses the FixedDMA() ACPI operator.
BUG=chrome-os-partner:23505,chrome-os-partner:24380
CQ-DEPEND=CL:179459,CL:179364
BRANCH=none
TEST=manual tests on rambi device:
1) build and boot with devices still in PCI mode and ensure that
nothing is changed
2) enable lpss_acpi_mode and see I2C devices detected by the kernel
in ACPI mode. Note that by itself this breaks trackpad probing so
that will need to be implemented before it is enabled.
3) enable scc_acpi_mode and see EMMC and SDCard devices detected by
the kernel in ACPI mode. Note that this breaks depthcharge use of
the EMMC because it is not longer discoverable as a PCI device.
Change-Id: I2a007f3c4e0b06ace5172a15c696a8eaad41ed73
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/179481
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/5004
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
CPU - fsp_model_206ax:
- Remove Kconfig options and mark this as using the FSP.
- Use shared FSP cache_as_ram.inc file
Mainboard - intel/cougar_canyon2:
- Update to use the shared FSP header file.
- Modify to call copy_and_run() directly instead of returning to
cache_as_ram.inc.
Northbridge - fsp_sandybridge:
- remove mrccache, fsp_util.[ch]
- add fsp/chipset_fsp_util.[ch] with chipset specific FSP bits.
- Update to use the shared FSP header file.
These changes were validated with FSP:
CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd
SHA256: e1bbd614058675636ee45f8dc1a6dbf0e818bcdb32318b7f8d8b6ac0ce730801
MD5: 24965382fbb832f7b184d3f24157abda
Change-Id: Ibc52a78312c2fcbd1e632bc2484e4379a4f057d4
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5636
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
- Move the non chipset-specific fsp pieces out of the chipset into a
shared area. This is used by northbridge / southbrige / SOC code. It
pulls in pieces from Kconfig, Makefile and FSP specific code.
- Enabled in the CPU code with a Kconfig "select PLATFORM_USES_FSP"
Change-Id: I7ffa934c1df09b71d48a876a56e3b888685870b8
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/5635
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Following the same reasoning as commit
d3043313a91dff3bc2f879ffb3b4bf23a364d711 superio/fintek/f81865f: Avoid
.c includes
Clean up the early_serial #include directives in mainboard/romstage code.
Change-Id: Ia6ed36c8517a95b651fefdd855eec0ec91d73187
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-on: http://review.coreboot.org/5439
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
|
