summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2016-12-09mainboard/google/reef: add board SKU'ing supportAaron Durbin
There are 2 gpios on reef-like boards that can be composed into a SKU. Add support for identifying the SKU value using the base 3 gpio logic. Also export the SKU information to the SMBIOS type 1 table. BUG=chrome-os-partner:59887,chrome-os-partner:60494 BRANCH=reef Change-Id: I8bb94207b0b7833d758054a817b655e248f1b239 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17771 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-08google/eve: Add ASL code to describe SPI FPC1020 controllerDuncan Laurie
There is ongoing work to link SPI bus and devices in to the devicetree so this can be generated, but for now put in the raw ASL code to describe this controller so it can be used by the factory. BUG=chrome-os-partner:55538 TEST=successfully load fpc1020 kernel module on eve board Change-Id: I6641664e60fcf2c0bad4b3506c77513b26d7be2e Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/17776 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08soc/intel/apollolake: Move privilege drop to later stageAndrey Petrov
Previously privilege drop was happening "too early" and that caused some PMC IPC programming (performed in FSP) to fail because sideband was already locked out. This change set moves privilege drop to later stage, after last FSP notify call. BRANCH=reef BUG=chrome-os-partner:60657 TEST=iotools rdmsr X 0x121, make sure they can't be read. Also dmesg|grep -i IPC to make sure there are no errors related Change-Id: Ia3a774aee5fbf92805a5c69093bfbd3d7682c3a7 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17769 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08cpu/x86: allow AP callbacks after MP initAaron Durbin
There are circumstances where the APs need to run a piece of code later in the boot flow. The current MP init just parks the APs after MP init is completed so there's not an opportunity to target running a piece of code on all the APs at a later time. Therefore, provide an option, PARALLEL_MP_AP_WORK, that allows the APs to perform callbacks. BUG=chrome-os-partner:60657 BRANCH=reef Change-Id: I849ecfdd6641dd9424943e246317cd1996ef1ba6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17745 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
2016-12-08bootstate: add arch specific hook at coreboot exitAaron Durbin
The bootstate machine allows one to schedule work at the boundaries of each state. However, there are no priorities by design. As such if there are things that need to be performed that are interdependent between callbacks there's no way to do that aside from explicitly putting the call in one of the callbacks. This situation arises around BS_OS_RESUME, BS_PAYLOAD_LOAD, and BS_PAYLOAD_BOOT as those are the states where coreboot is about to exit. As such, provide an architecture specific hook at these key places so that one is guaranteed any work done in arch_bootstate_coreboot_exit() is after all callbacks in the state machine. BUG=chrome-os-partner:60657 BRANCH=reef Change-Id: Icb4afb341ab15af0670501b9d21799e564fb32c6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17767 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-08buildsystem: Drop explicit (k)config.h includesKyösti Mälkki
We have kconfig.h auto-included and it pulls config.h too. Change-Id: I665a0a168b0d4d3b8f3a27203827b542769988da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17655 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-08mainboard/google/reef: Set PL2 override to 15000mWSumeet Pawnikar
This patch sets PL2 override value to 15W in RAPL registers. BUG=chrome-os-partner:60535 TEST=Built, booted on reef and verified PL2 value. Change-Id: I4ff6a5e7b8686d97134846ee80cdac10916d58ef Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17730 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08soc/intel/apollolake: Set PL2 in RAPL registerSumeet Pawnikar
This patch sets the package power limit (PL2) value in RAPL register. BUG=chrome-os-partner:60535 TEST=Built, booted on reef and verified PL2 value. Change-Id: I83fe854cf3e9fc92ab87f84b86e64ebb6085065f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/17699 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-08commonlib: provide incoherent region deviceAaron Durbin
The MRC cache uses an incoherent mechanism for updating the cache contents in that it assumes memory mapped boot device access for checking against latest data for update. However, it uses another driver for updating the underlying storage area. In order to aid in moving the MRC cache over to using region_devices for updates provide an implementation of a region_device which performs reads and writes to different region_devices so that different drivers can be used transparently. BUG=chrome-os-partner:56151 Change-Id: I30e858245c30cbccd6313aff5ebecd3fd98d7302 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17716 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2016-12-08drivers/spi: provide a mechanism to obtain the SPI flash boot deviceAaron Durbin
The MRC cache wants to be able to access the SPI flash boot device. Allow an easy way to provide that so that there isn't duplicate spi_flash objects representing the same device. BUG=chrome-os-partner:56151 Change-Id: Iba92e8bb8a6060cdd327b10f5f8ec23ac61101e7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17715 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-08lib: add region file supportAaron Durbin
The region file library is added to provide the underpinnings for other libraries that support appending updates when the data changes. The most recent written data is deemed the latest data associated with that "file". A good example is the MRC cache which in a follow-up patch utilizes this library. BUG=chrome-os-partner:56151 Change-Id: Ic3caf1edbb6f11dbbe27181a87b7b19d1224fffa Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17713 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-08lib/compute_ip_checksum: mark data buffer as constAaron Durbin
compute_ip_checksum() doesn't manipulate the data it is passed. Therefore, mark it as const. BUG=chrome-os-partner:56151 Change-Id: I54cff9695a886bacd6314aa441d96aaa7a991101 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17714 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-08google/beltino, tidus: simplify led_power_on() functionMatt DeVillier
Simplify set_power_led() by consolidating switch and setting values as needed inline based on LED state. Remove unnecesary function param, includes for Tidus. Change-Id: I28e6fac5f8d7e2ff419002db714ce88697895faf Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17744 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-08drivers/r8168: Read default MAC address from CBFSDamien Zammit
This driver applies to 10ec:8168 Previously, this driver resetted the nic and set a hardcoded MAC address. Now the driver reads a default MAC address from CBFS in the form of a string: echo -n "xx:xx:xx:xx:xx:xx" > macaddress and store the macaddress file in CBFS with the same name. TESTED on GA-G41M-ES2L and GA-945GCM-S2L: MAC address was detected Change-Id: If1af91120fa3efca3f1406334a83ed1e59fbdaf9 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/17672 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-08nb/intel/sandybridge: Lock PAVPCDennis Wassenberg
This makes CHIPSEC happy. We don't enable PAVP, but it shouldn't hurt to lock it nevertheless. Change-Id: I9428f0b6e8868832eb79f7aea24cbc7961c2aa8f Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Reviewed-on: https://review.coreboot.org/17352 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-08sb/intel/bd82x6x: Add TCO_Lock in finalize stepDennis Wassenberg
CHIPSEC found that the TCO_Lock was not set. This is used to prevent changing the TCO_EN bit. Change-Id: I42364dbef2511e656662566cf94591e76c6847ed Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Reviewed-on: https://review.coreboot.org/17351 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07soc/broadwell: set EM4/EM5 registers based on cdclkMatt DeVillier
The EM4/EM5 registers in the mini-HD audio device must be set based on the GPU cdclk value in order for HDMI audio to function properly. Add variables to save the correct values when initializing the GPU, and accessor functions to retrieve them in order to set the registers when initializing the mini-HD audio device. Change-Id: Icce7d5981f0b2ccb09d3861b28b843a260c8aeba Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17718 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-07google/beltino: fix LED, simplify function for Tricky variantMatt DeVillier
Simplify set_power_led() by consolidating switch and setting values as needed inline based on LED state. Fix non-off LED polarity for Tricky using correct value from Chromium source TEST: power on Tricky, observe LED lit / solid Change-Id: I8bc7c4ae3f83d3f37b76fd5c90a4faed7057ebee Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17719 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-07src/device: Get device structure by path typeSubrata Banik
Add helper function to find a device by path type in the device tree. Change-Id: I8846f63bd2488788ea3c7ab5154e7cf431a252bc Credits-to: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Dhaval V Sharma <dhaval.v.sharma@intel.com> Reviewed-on: https://review.coreboot.org/17731 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07soc/intel/apollolake: Use the new SPI driver interfaceFurquan Shaikh
1. Define controller for fast SPI. 2. Separate out functions that are specific to SPI and flash controller in different files. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully for reef. Change-Id: If07db9d27bbf4f4eb6024175cb7753c6cf4fb793 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17562 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07spi: Clean up SPI driver interfaceFurquan Shaikh
1. Add new structure spi_ctrlr_buses that allows platform to define a mapping from SPI controller to buses managed by the controller. 2. Provide weak implementations of spi_init and spi_setup_slave that will be used by platforms using the new interface. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia6f47941b786299f4d823895898ffb1b36e02f73 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17561 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/intel/skylake: Remove unwanted spi_release callFurquan Shaikh
Skylake uses a special SPI Flash controller and does not require spi_claim_bus and spi_release_bus functionality. This was a leftover call from earlier cleanup, so remove it. Change-Id: Iea260813cf72b94b7e7c661dbe494a74351dc357 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17729 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07soc/intel/skylake: Remove redundant BootLoaderTolumSize assignmentSubrata Banik
BootLoaderTolumSize FSP-M UPD is already initialized with cbmem_overhead_size() inside driver/fsp2_0/memory_init.c, hence remove the duplicate assignment. Change-Id: I0b1d9769cd2a863bf0547ce5f44928cacc5a63b6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/17721 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07lib: Add time stamp when starting to finalize chipsPaul Menzel
Add the new time stamps *finalize chips* to track, when the method `dev_finalize_chips()` is called, so that the real time of `write_tables()` is known. Change-Id: I65ca0ec4c07c2eaa14982989cb206d23d8a2293f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/17725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-07sio/ite/it8783ef: New super i/o chipNico Huber
This will be used by new Roda boards. Four UARTs and PS/2 keyboard and mouse are exposed to ACPI. Since our boards only use the environment controller part, most of the usual pnp interfaces are untested. Change-Id: Ifeb0327ad115759411716f82585ace5ce55b8464 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17287 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07sio/acpi: Add more magic bytes to ENTER/EXIT_CONFIG_MODENico Huber
ITE super-i/o chips need a fourth byte and have a special register to exit config mode. Change-Id: Ic40873649d567b87d3a937f2bf068649e67715de Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07sio/ite/common: Export pnp_enter/exit_conf_state()Nico Huber
Change-Id: I8cbfe49516e685c1b3e150b23f9fcac513f1f3dc Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/17285 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-07soc/mediatek/mt8173: Do not initialize static variables to 0Furquan Shaikh
Change-Id: Ibf0bd772bfdb3bbf6482a0ec9ff90a5c0a8945d2 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17765 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07AMD fam10 binaryPI: Remove invalid PCI ops on CPU domainKyösti Mälkki
Device is of type CPU_CLUSTER, while pci_dev_set_resources() expects PCI_DOMAIN. Change-Id: Ib1add47d71071abb6e9c28e3a85dd0b671741b71 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17697 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Drop redundant loggingKyösti Mälkki
Resource is actually stored even before read_resources, but that's where we currently log this resource. For Intel, use PCI config register offset as the resource index, while AMD side uses MSR address. Change-Id: I6eeef1883c5d1ee5bbcebd1731c0e356af3fd781 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17696 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Consolidate resource registrationKyösti Mälkki
Change-Id: Id727270bff9e0288747d178c00f3d747fe223b0f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17695 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07MMCONF_SUPPORT: Flip default to enabledKyösti Mälkki
Also remove separate MMCONF_SUPPORT_DEFAULT flag. Change-Id: Idf1accdb93843a8fe2ee9c09fb984968652476e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17694 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07PCI ops: MMCONF_SUPPORT_DEFAULT is requiredKyösti Mälkki
Doing PCI config operations via MMIO window by default is a requirement, if supported by the platform. This means chipset or CPU code must enable MMCONF operations early in bootblock already, or before platform-specific romstage entry. Platforms are allowed to have NO_MMCONF_SUPPORT only in the case it is actually not implemented in the silicon. Change-Id: Id4d9029dec2fe195f09373320de800fcdf88c15d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17693 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-07mainboard/google/reef: adjust chromeos.fmd regionsAaron Durbin
- Drastically reduced RW_MRC_CACHE size to hold one update. Now that this area isn't changing after every S5 entry there's no need make it so large. - ELOG area reduced by 4KiB for subsequent area alignment. In practice this doesn't matter because the elog library only uses 4KiB bytes. 16KiB->12KiB is a nop. - Moved RW_NVRAM for subsequent alignment. - Most importantly, RW_SECTION_(A|B) are aligned to 64KiB boundaries and sized to 64KiB multiples. This ensures updates don't need a read-modify-write that could force a system into recovery if an inopportune power event occurred. BUG=chrome-os-partner:60492 BRANCH=reef Change-Id: I2a2e2797897c934db1a3f9627c6c13a9b2aad540 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17727 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-06Bob: Update the memory ramid of bobShasha Zhao
Update the memory ramid. Move to one CA training pattern. BUG=chrome-os-partner:59454 BRANCH=firmware-gru-8785.B TEST=Build firmware passed Change-Id: Ic05cbc1700a13e372f63d5202459add0e984f9d8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 1030a78af3d489d13508f17a79df1e65bd5afa3b Original-Change-Id: Ibe8acb5b698cec1adcdddbb13d35a5e20a5b8c0d Original-Reviewed-on: https://chromium-review.googlesource.com/414664 Original-Commit-Ready: Shasha Zhao <Sarah_Zhao@asus.com> Original-Tested-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Change-Id: I0ae46e496cd18492a2b6c7167081798c2f2479b1 Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411645 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17679 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06Bob: add bob in corebootShasha Zhao
Add bob in coreboot and update as necessary. 1. Add bob HWID 2. Add supported memory source BUG=chrome-os-partner:59454 BRANCH=firmware-gru-8785.B TEST=Build firmware passed Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Change-Id: Iad03a293bdbbb89450f0fea0822e34a4be7064bf Original-Commit-Id: bff788c71a43403bff2c23b38e69cc27fb869559 Original-Change-Id: I0dcf47eb911337b176f73759a2c70a9dbf4dc68b Original-Signed-off-by: Shasha Zhao <Sarah_Zhao@asus.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411083 Original-Reviewed-by: Philip Chen <philipchen@chromium.org> Original-(cherry picked from commit c5925dfcf59ac755a26182744b2bde59e41a37cf) Original-Reviewed-on: https://chromium-review.googlesource.com/413744 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17678 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
We may support different sdram sizes on one board in future, so we need to calculate sdram sizes from sdram drvier. BRANCH=None BUG=None TEST=boot kevin Change-Id: I43e8f164ecdb768c051464b4dbc7d890df8055d0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 3c4d8b3cb647b2f9cebc416c298817c16d49330e Original-Change-Id: I95d5ef34de9d79ebca3600dc7a4b9e14449606ff Original-Signed-off-by: Lin Huang <hl@rock-chips.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411600 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/17629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06google/gru: Power-cycle USB ports in developer/recovery modesJulius Werner
Gru only uses USB 2.0 in firmware to avoid all the madness associated with Type-C port orientation and USB 3.0 tuning. We do this by isolating the SuperSpeed lines in the Type-C PHY so it looks like they aren't connected to the device. Unfortunately, some devices seem to already get "locked" into SuperSpeed mode as soon as they detect Rx terminations once, and can never snap out again on their own. Since the terminations are already connected during power-on reset we cannot disable them fast enough to prevent this, and the only solution we found to date is to power-cycle the whole USB port. Now, Gru's USB port power is controlled by the EC, and unfortunately we have no direct host command to control it. We do however have a command to force a certain USB PD "role", and forcing our host into "sink" mode makes it stop sourcing power to the port. So for lack of a saner solution we'll use this to work around our problem. BRANCH=gru BUG=chrome-os-partner:59346 TEST=Booted Kevin in recovery mode, confirmed that my "problem stick" gets detected immediately (whereas previously I had to unplug/replug it). Booted Kevin to OS in both developer and normal mode and confirmed that USB still seems to work. Change-Id: Ib3cceba9baa170b13f01bd5c01bd413be5b441ba Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: cd695eda33299e50362f1096c46f2f5260c49036 Original-Change-Id: I2db3d6d3710d18a8b8030e94eb1ac2e931f22638 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/413031 Reviewed-on: https://review.coreboot.org/17628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06google/chromeec: Add command to control USB PD roleJulius Werner
Normally firmware should have no business messing with the USB PD role (source/sink/whatever) in the EC. But, as so often happens, ugly issues crop up that require weird work-arounds, and before you know it you need to do this for some reason that only makes sense in context. I do now, so add this function to send the necessary host command in the simplest possible fashion. BRANCH=gru BUG=chrome-os-partner:59346 TEST=Used it in a follow-up patch. Change-Id: I07d40feafd6a8387a633d6384efb205baf578d76 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8b71767caccff9b77d458182ce8066f7abf6321c Original-Change-Id: Ie8d0be98f6b703f4db062fe2f728cd2588347202 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/413030 Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/17627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-06cpu/amd/mtrr.h: Drop excessive includesKyösti Mälkki
Change-Id: Id404bdab1f2361f1e7d20f7ee72111971863dddf Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17736 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06cpu/cpu.h: Drop excessive includesKyösti Mälkki
Change-Id: Ifeef04b68760522ce7f230a51f5df354e6da6607 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17734 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06CPU: Declare cpu_phys_address_size() for all archKyösti Mälkki
Resource allocator and 64-bit PCI BARs will need it and PCI use is not really restricted to x86. Change-Id: Ie97f0f73380118f43ec6271aed5617d62a4f5532 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17733 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06CPU: Move SMM prototypes under x86Kyösti Mälkki
Change-Id: Iefbc17dcfcf312338d94b2c2945c7fac3b23bff6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17732 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-06PCI ops: Remove pci_mmio_xx() in ramstageKyösti Mälkki
MMCONF operations are already the default so these would never be used. Change-Id: I671f3d2847742e400bc4ecfccc088e3b79d43070 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17691 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Rename pcie_xx() to pci_mmio_xx()Kyösti Mälkki
Change-Id: I7fa65197b8165b9b0b74937f9ba455c48308da37 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17530 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Define read-modify-write routines globallyKyösti Mälkki
Change-Id: I7d64f46bb4ec3229879a60159efc8a8408512acd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17690 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. I liked the style of code in pci_mmio_cfg.h more, and used those to replace the ones in io.h. Change-Id: Ib5e6a451866c95d1edb9060c7f94070830b90e92 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17689 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06PCI ops: Remove conflicting duplicate declarationsKyösti Mälkki
The code originates from times before __SIMPLE_DEVICE__ was introduced. To keep behaviour unchanged, use explicit PCI IO operations here. Change-Id: I44851633115f9aee4c308fd3711571a4b14c5f2f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17720 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: If62537475eb67b7ecf85f2292a2a954a41bc18d1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17545 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel PCI ops: Remove explicit PCI MMCONF accessKyösti Mälkki
MMCONF was explicitly used here to avoid races of 0xcf8/0xcfc access being non-atomic and/or need to access 4kiB of PCI config space. All these platforms now have MMCONF_SUPPORT_DEFAULT. Change-Id: I943e354af0403e61263f1c780f02c7b463b3fe11 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17529 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06mb/lowrisc/nexys4ddr: Read RAM information from the config stringJonathan Neuschäfer
Change-Id: I9147eca0b536b6267d58f6e8baa37b6950b35160 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17710 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06mb/lowrisc/nexys4ddr: Initialize CBMEM in romstageJonathan Neuschäfer
Change-Id: Ic1706ae8ab3cbef8f445d70cb78fa9d3301d87be Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17707 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06soc/lowrisc: Place CBMEM at top of autodetected RAMJonathan Neuschäfer
Change-Id: I9f169db330d1792128db7a6308ed3afbe5803c03 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17708 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06soc/marvell/mvmap2315: Fix integer arithmeticJonathan Neuschäfer
Replace logical with bitwise AND operator. Change-Id: I712fab61fbbc833fc2b2575948a875e2f07fd5de Reported-by: Coverity (CID 1362808) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17401 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06riscv: Stub out sbi_(un)mask_interruptJonathan Neuschäfer
Linux needs these SBI calls, but so far it seems to work when they don't do anything. Change-Id: I2cd0bb3ab91e89805fed84ec87e4a48ce70c3a46 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17593 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06soc/ucb/riscv: Place CBMEM at top of autodetected RAMJonathan Neuschäfer
Change-Id: Ida016aec11ccdb8da8d2ae1d30ddca16b069be11 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17595 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06arch/riscv/mcall.c: Return the correct memory base and sizeJonathan Neuschäfer
Change-Id: Ibf471787ccb4f5393b0af737a9f7fc47b853a41a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17594 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06mc_tcu3: Do not abort initialization of PTN3460 when HW-ID is missingWerner Zeh
Do not abort the initialization of PTN3460 if HW-ID could not be retrieved and just assume that the HW-ID does not match 7.9.2.0. In this case PTN3460 will be setup to a working condition even if this field is missing. This makes this driver more robust with faulty blocks. Change-Id: I301fb165a7924768e44182d92be820294beb0280 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/17671 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2016-12-06vendorcode/siemens: Ensure a given info block is available for a fieldWerner Zeh
While searching for a field in all blocks ensure that the checked block is available and can be used. In this way a field can be retrieved from every block and not just the first one. Change-Id: Idbd7656ab0664763cb065f5e817193ad1d9e0871 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/17670 Tested-by: build bot (Jenkins) Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2016-12-06AMD fam10h-15h: MMCONF_SUPPORT_DEFAULT is already setKyösti Mälkki
It gets selected from CPU_AMD_MODEL10XXX. Change-Id: Iffab43edc1152b07ba2af6273d4b5eb94afe33ba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17692 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel/fsp_sandybridge: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Untested. Change-Id: I61ab1e5279c995f933971332673aa4ca0150e80c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17544 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06intel/fsp_rangeley: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Boards with this chipset do not have any reference of MMCONF_BASE_ADDRESS being written to chipset registers. Either board support is already broken or FSP takes care of this early and Kconfig lacks the notice that this parameter must match with the chosen FSP binary. CPU bootblock associated with this chipset uses exclusive PCI IO access already. Untested. Change-Id: I07d20d81266ff6aaa6384d20a806d52fd4568e08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17547 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-06spi_flash: Make a deep copy of spi_slave structureFurquan Shaikh
Commit 36b81af (spi: Pass pointer to spi_slave structure in spi_setup_slave) changes the way spi_setup_slave handles the spi_slave structure. Instead of expecting spi controller drivers to maintain spi_slave structure in CAR_GLOBAL/data section, caller is expected to manage the spi_slave structure. This requires that spi_flash drivers maintain spi_slave structure and flash probe function needs to make a copy of the passed in spi_slave structure. This change fixes the regression on Lenovo X230 and other mainboards. Change-Id: I0ad971eecaf3bfe301e9f95badc043193cc27cab Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17728 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Iru Cai <mytbk920423@gmail.com>
2016-12-05mainboard & southbridge: Clear files that are just headersMartin Roth
These headers & comments indicating a lack of functionality don't help anything. We discourage copyrights and licenses on empty files, so just clear these. Change-Id: Id2ab060a2726cac6ab047d49a6e6b153f52ffe6d Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17657 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-05Add/Combine Haswell Chromebooks using variant board schemeMatt DeVillier
Combine existing boards google/falco and google/peppy with new ChromeOS devices leon and wolf, using their common reference board (slippy) as a base. Chromium sources used: firmware-falco_peppy-4389.81.B d7703cac [falco: Add support for Samsung...] firmware-leon-4389.61.B ea1bf55 [haswell: Enable 2x Refresh Mode] firmware-wolf-4389.24.B 7c5a9c2 [Wolf: haswell: Add small delay before...] Additionally, some minor cleanup/changes were made: - I2C devices set to use ACPI (vs PCI) mode - I2C device ACPI entries adjusted as per above - I2C devices set to use level (vs edge) interrupt triggering - XHCI finalization enabled in devicetree - HDA verb entries use simplified macro entry format Existing google/falco and google/peppy boards will be removed in a subsequent commit. Variant setup modeled after google/beltino Change-Id: I087df5f98c1bb4ddd0ab24ee9ff786a9d38d87be Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17621 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-05Remove boards google/falco and google/peppyMatt DeVillier
No need for these boards to exist separately once included as variants under google/slippy Change-Id: I52a476ceaadf50487d6fe21e796d7844f946d8b3 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17622 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-05rockchip/rk3399: display: Update edp initialization retryMartin Roth
Follow on patch to clean up the previous retry code. Previous patches: coreboot commit 079b5c65 (rockchip/rk3399: display: Retry edp initialization if it fails) cros commit 28c57a6e (rockchip/rk3399: display: retry edp initialization if edp initial fail) - Reduce the jumping around via goto statements - Break the retry code out into a separate function that also prints the error messages. BRANCH=gru BUG=chrome-os-partner:60150 TEST=Rebuild Kevin and Gru Change-Id: I3b6cf572073e4dcac83da09621bafde179af2613 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/17642 Tested-by: build bot (Jenkins) Reviewed-by: Julius Werner <jwerner@chromium.org>
2016-12-05nb/intel/sandybridge/raminit: Split raminit.cPatrick Rudolph
Split raminit.c into smaller parts. Move all functions that will be used by chip-specific code into raminit_common.c. The chip-specific changes includes new configuration values for IvyBridge and 100Mhz reference clock support, including new frequencies. No functionality is changed. Tested on Lenovo T420. Change-Id: If7bb5949f4b771430f3dba1b754ad241a7e8426b Signed-off-by: Patrick Rudolph <siro@das-labor.org> Reviewed-on: https://review.coreboot.org/17604 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-12-05spi: Define and use spi_ctrlr structureFurquan Shaikh
1. Define a new structure spi_ctrlr that allows platforms to define callbacks for spi operations (claim bus, release bus, transfer). 2. Add a new member (pointer to spi_ctrlr structure) in spi_slave structure which will be initialized by call to spi_setup_slave. 3. Define spi_claim_bus, spi_release_bus and spi_xfer in spi-generic.c which will make appropriate calls to ctrlr functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Icb2326e3aab1e8f4bef53f553f82b3836358c55e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17684 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Pass pointer to spi_slave structure in spi_setup_slaveFurquan Shaikh
For spi_setup_slave, instead of making the platform driver return a pointer to spi_slave structure, pass in a structure pointer that can be filled in by the driver as required. This removes the need for platform drivers to maintain a slave structure in data/CAR section. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ia15a4f88ef4dcfdf616bb1c22261e7cb642a7573 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17683 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-05spi: Fix parameter types for spi functionsFurquan Shaikh
1. Use size_t instead of unsigned int for bytes_out and bytes_in. 2. Use const attribute for spi_slave structure passed into xfer, claim bus and release bus functions. BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: Ie70b3520b51c42d750f907892545510c6058f85a Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17682 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-04spi_flash: Move spi flash opcodes to spi_flash.hFurquan Shaikh
BUG=chrome-os-partner:59832 BRANCH=None TEST=Compiles successfully Change-Id: I3b6656923bb312de470da43a23f66f350e1cebc7 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/17680 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03mainboard/intel/kblrvp: Enabling Kaby Lake RVP7Barnali Sarkar
Add support for Kaby Lake RVP7 board * Add RVP7 board support in Kconfig * Override default descriptor and ME binary paths in Kconfig since those binaries will differ for RVP3 and RVP7 * Add RVP7 board name in board_info.txt and Kconfig.name * Add devicetree.cb for RVP7 in the variants path * Add gpio.h for RVP7 in variants/include/variant path * Made board specific code for retrieving spd, i.e., in RVP7 there is non-soldered DIMMs, so SPD is read through smbus, unlike RVP3 where memory DIMMs are soldered down with board. Hence for RVP3, the spd binaries will be fixed and can be kept as binary file in cbfs. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP7 Change-Id: I6f3d17d857bad1b5cf39f0bc900c760fee72da48 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-03nb/i945/raminit.h: Fix fsb_frequency's commentElyes HAOUAS
Change-Id: Ie1c28b73bd2d34070173838d341cc6b8f65f50ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17686 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-03nb/x4x: Fix sticky scratchpad register offsetArthur Heymans
Change-Id: I9b952e32dc661f5c1fa96b037b415693d8777b04 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17685 Tested-by: build bot (Jenkins) Reviewed-by: Damien Zammit <damien@zamaudio.com>
2016-12-03rockchip/rk3399: Fix typoPatrick Georgi
TRAINING, not TARINING. BUG=none BRANCH=none TEST=still builds Change-Id: I8b7ffd0f0544a58865865a8b09d9c153db9c2674 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b1ea846ce1ffd654d7d34c2a1d43b0fddbd4ae32 Original-Change-Id: I4940279ed7217cc20fe29c8b3603d1853acbfc5e Original-Signed-off-by: Patrick Georgi <pgeorgi@google.com> Original-Reviewed-on: https://chromium-review.googlesource.com/411801 Original-Commit-Ready: Patrick Georgi <pgeorgi@chromium.org> Original-Tested-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/17677 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-12-02soc/intel/common: Add suppport for Extended VBTAbhay Kumar
With addition of new features in VBT its size got increased more than 6k and was unable to pass using mailbox 4 hence pass using mailbox 3 to kernel. BRANCH=none BUG=chrome-os-partner:60026 TEST=firmware screen and Chrome OS screen should come up. Change-Id: I359cf9bc402881161c9623cada689496716e04a5 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/17585 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-02google/pyro: set i2c bus timings by rise/fall timesKevin Chiu
Provide the rise and fall times for the i2c buses and let the library perform the necessary calculations for the i2c controller registers instead of manually tuning the values. BUG=chrome-os-partner:58112 BRANCH=master TEST=emerge-pyro coreboot Change-Id: I68be9b96dc731eb0084ee5e15921866818637e73 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/17652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-02mainboard/google/reef: Add all DMIC endpointsSathyanarayana Nujella
Independent of Board DMIC configuration, add all DMIC points i.e. add DMIC-1ch, DMIC-2ch, DMIC-4ch endpoints. This allows flexibility to userspace to open capture devices as needed. This is a temporary fix; once upper layers support choosing particular channels from 4-ch PCM stream, we will limit exposing only DMIC-4ch endpoint. BUG=chrome-os-partner:60444 BRANCH=none TEST=Verify All DMIC blobs are included Change-Id: I9729a3570c0668f3da4e7986291ebad6fe1de47a Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-on: https://review.coreboot.org/17660 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-02soc/intel/apollolake: Drop privilege level to IA_UNTRUSTEDAndrey Petrov
As per guidelines CPU security level should be dropped before OS start, so that certain MSRs are locked out. Drop privilege levels on all logical CPUs. BUG=chrome-os-partner:60454 TEST=iotools rdmsr x 0x120, make sure bit 6 is set, rdmsr x 0x121 results in io error. Change-Id: I67540f6da16f58b822db9160d00b7a5e235188db Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17665 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-12-02soc/intel/apollolake: Enable ACPI PM timer emulation on all CPUsAndrey Petrov
Currently we enable ACPI PM timer emulation only on BSP. So the timer doesn't work on other cores and that breaks OSes that use it. Also, microcode uses this information to figure out ACPI IO base, and that is used for other features. This patch enables ACPI timer emulation on all the logical CPUs. BUG=chrome-os-partner:60011 TEST=iotools rdmsr x 0x121, x={0..3}, make sure it is set Change-Id: I0d6cb8761c1c25d3a2fcf59a49c1eda9e4ccc70c Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/17663 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-01PCIEXP_PLUGIN_SUPPORT: Change dependency on PCI accessKyösti Mälkki
Some PCI-e capability registers are located starting from 0x100, these are not accessible using the conventional PCI IO config operations at 0xcf8/0xcfc, unless PCI_CFG_EXT_IO was selected. Thus any feature that calls pciexp_find_extended_cap() depends on either MMCONF_SUPPORT_DEFAULT or PCI_CFG_EXT_IO being enabled on the platform. In theory there can be system without MMCONF_SUPPORT, but with complete PCI Express configuration space available using PCI_CFG_EXT_IO. Do not use explicit PCI MMCONF operations here, but rely on the default PCI access method to be able to access all of the configuration space. While at it, convert to IS_ENABLED() everywhere in the source and organize Kconfig file better. Change-Id: Ica6e16d2fb2adc532e644c4b2c47806490235715 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17546 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01PCIEXP_ASPM: Unify code with other PCI-e tuningKyösti Mälkki
Error reporting can be enabled together with ASPM, there is no other use for function return value. Change-Id: I58081fac0df5205a5aea65d735d34b375c2af9cd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17654 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01mainboard/google/reef: allow variants to modify nhlt oem revisionAaron Durbin
In order to mirror the full flexibility of the NHLT library that allows a caller to set the OEM revision field in the ACPI header modify the variant callback to override the value. Change-Id: I16e539b350a50e3c163be1439c8637b82e53a759 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17651 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins)
2016-12-01lib/nhlt: add support for setting the oem_revisionAaron Durbin
In the ACPI header there's an OEM revision field that was previously just being implicitly set to 0. Allow for a board to provide a non-zero value for this field. Change-Id: Icd40c1c162c2645b3990a6f3361c592706251f82 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17650 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01arch/x86: cache postcar in stage cacheAaron Durbin
Stash and reload postcar stage in the stage cache for increased S3 resume speed. It's impact is small (2 ms or so), but there's no need to go to the boot media on resume to reload something that was already loaded. This aligns with the same paths we take on ramstage as well. Change-Id: I4313794826120853163c7366e81346858747ed0a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17649 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01lib: put romstage_handoff implementation in own compilation unitAaron Durbin
Instead of putting all the functions inline just put the current implementation into a C file. That way all the implementation innards are not exposed. Lastly, fix up the fallout of compilation units not including the headers they actually use. Change-Id: I01fd25d158c0d5016405b73a4d4df3721c281b04 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17648 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01romstage_handoff: add helper to determine resume statusAaron Durbin
Instead of having callers query the romstage handoff resume status by inspecting the object themselves add romstage_handoff_is_resume() so that the same information can be queried easily. Change-Id: I40f3769b7646bf296ee4bc323a9ab1d5e5691e21 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17647 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01romstage_handoff: remove code duplicationAaron Durbin
The same pattern was being used throughout the code base for initializing the romstage handoff structure. Provide a helper function to initialize the structure with the S3 resume state then utilize it at all the existing call sites. Change-Id: I1e9d588ab6b9ace67757387dbb5963ae31ceb252 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/17646 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-12-01AMD binaryPI: Disable PCI_CFG_EXT_IOKyösti Mälkki
We don't need to do explicit pci_io_read/write operations, as we can use MMCONF everywhere. AGESA code still enables extended cf8/cfc should it be needed by payload or OS. Change-Id: Ib08028bda1b5226bb3b6b67e91f514480a9fc5ee Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17536 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AMD binaryPI: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Vendorcode always does PCI MMCONF access once it is enabled via MSR. In coreboot proper, we don't give opportunity to make pci_read/write calls before PCI MMCONF is enabled via MSR. This happens early in romstage amd_initmmio() for all cores. Change-Id: Id6ec25706b52441259e7dc1582f9a4ce8b154083 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17534 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AMD binaryPI: Use explicit PCI IO config access in bootblockKyösti Mälkki
This allows us to set MMCONF_SUPPORT_DEFAULT since we enable MMCONF early in romstage. Change-Id: I380cf483bfe4e2d64969110ae6d5d04c3ced2418 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17532 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA: Disable PCI_CFG_EXT_IOKyösti Mälkki
We don't need to do explicit pci_io_read/write operations, as we can use MMCONF everywhere. AGESA code still enables extended cf8/cfc should it be required by payload or OS. Change-Id: I278e5e26eb9a247f67927cbc67e04f081ca50f7b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17535 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA: Switch to MMCONF_SUPPORT_DEFAULTKyösti Mälkki
Vendorcode always does PCI MMCONF access once it is enabled via MSR. In coreboot proper, we don't give opportunity to make pci_read/write calls before PCI MMCONF is enabled via MSR. This happens early in romstage amd_initmmio() for all cores. Change-Id: If31bc0a67b480bcc1d955632f413f5cdeec51a54 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17533 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA: Use explicit PCI IO config access in bootblockKyösti Mälkki
This allows us to set MMCONF_SUPPORT_DEFAULT since we enable MMCONF early in romstage. Change-Id: I994bb257db96300c2eb8872be6fae2a92bbabab4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17531 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01asus/f2a85-m msi/ms7721: Enable MMCONF earlyKyösti Mälkki
PCI MMCONF access only works after amd_initmmio() call. Change-Id: I5765604e178d09abdd6bb6ce7cc220bc5b35ed03 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17565 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA f14: Consolidate early P-states settingKyösti Mälkki
Change-Id: I3feed296b6ff9908e783c1221a8f61d9c548fef4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17564 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-12-01AGESA f14: Consolidate XIP cacheKyösti Mälkki
Do this like fam15tn to reduce code duplication. Change-Id: I064fd27b85be7fb0c9d6918a84fc6f9b17065534 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17563 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-30mainboard/artecgroup/dbe61/mainboard.c: Use tab for indentsElyes HAOUAS
Change-Id: I111ded7cc3cac21e4be6329209fdd067f313010a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/17662 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>