| Age | Commit message (Collapse) | Author |
|---|
|
and we will fix issues as they appear.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
change makes it use the generic infrastructure.
NOTE: If you're bisecting issues on geode-lx circa jumping to coreboot_ram,
this change has a high probability to break that place - so look into it.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4530 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
should be 1.
We have another mode called side port mode. It is When the CONFIG_GFXUMA is 0.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4525 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4497 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
and adapt its user (x86emu) to match.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4496 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
certain configuration options are disabled. The strings were just
at the wrong place.
Two boards fix up some variables for romstream. This isn't necessary (or
possible) when CBFS is active, as there is no romstream. It would be
nicer to have them depend on CONFIG_ROM_PAYLOAD, but there isn't any
invariant that forces that to be inactive if CBFS is active, and this
patch is supposed to be small, esp. as the stream loaders are on the way
out.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4494 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This is a trivial patch.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4472 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4467 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- update, add, and improve comments
- whitespace here and there
- remove unused or write-only variables
- improve debug output
- only build payload.{nrv2b,lzma} for non-cbfs
- improved error checking in cbfstool
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4466 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add initialisation for the VIA Chrome 9 IGP on the k8m890 through native code
and through the general vga infrastructure i committed a month or two ago.
Add videoram_size option for k8m890 and the Asus M2V-MX SE.
Now the Asus M2V-MX SE will magically come up with a working standard VGA
80x25 textmode.
Many thanks to the people who worked hard on the Asus M2V-MX SE, and all
of its components; this vga bringup was a breeze thanks to your hard work
for this excellently supported board. And separate thanks to Rudolf Marek
for spurring me on and for providing a register dump.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4465 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
linux out of the box. There were two problems. First was that the
mmconfig ACPI structure was empty because of cut and paste (PCI ID of
K8M890 is different).
Second problem is now nicely solvable by add_region. Linux expects that
the mmconfig region is found as reserved memory. Otherwise it does not
trust it.
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4464 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
src/include/device/pci.h:75: warning: redundant redeclaration of 'pci_dev_init'
src/include/device/pci_rom.h:39: warning: previous declaration of 'pci_dev_init' was here
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4462 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* acpi_add_table requires a pointer to the RSDP, not the RSDT anymore, in order
to properly support XSDT generation.
* fix compilation the DSDT on gigabyte/m57sli
* drop a remaining, forgotten HPET_NAME for "HPET"
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4461 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4460 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4459 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Move interrupt routing to mainboard specific code.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4458 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4457 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- code restructuring (move ich7 out of i945)
- ACPI fixes
- major SMI handler updates
- make sure SMBus lives where we expect it
- try to get usb debug working
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4456 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* detect more i945 variants
* raminit fixes
* ACPI + PCIe updates
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4455 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4454 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
soon as there's an ACPI 2.0 or later table)
* add XSDT support
* add more table types
This patch will break at least the kontron (and possibly some new boards I
missed)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4453 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
more flexible. Also some minore device allocator cleanups that sneaked
in.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4452 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
include ldoptions from ldscript.ld instead appending it.
Not everyone was happy about the -Wmissing-prototypes in CFLAGS.
I put it in there now anyways, so everyone can get an overview which parts of
their code could use some cleanup. If it gets too ugly, we can still remove
that flag again.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4451 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
coreboot ram stage.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4450 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
rather than doing inexact and slow idle loops.
Also improve error reporting in case of problems.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4449 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
and refactoring
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4447 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
* Add generic Local APIC based timer code. This timer does not need expensive
calibration and thus reduces the boot time by up to more than a second.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4446 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- drop duplicate udelay function
- simplify code flow
- some cosmetics on comments
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4445 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4444 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4443 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
those symbols were left alone before, after this, they're
somewhat more in line with the rest of the tree.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The patch adds proper preprocessor guards and drops the malloc() prototype
because that's in stdlib.h
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4441 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4440 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
(according to the spec) to change the string in-situ,
even if glibc doesn't do it.
This avoids errors on Mac OS and Solaris.
Kill nrv2b support in CBFS (we have lzma),
slightly improve debug output in CBFS,
properly declare all functions of CBFS in the header.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4436 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 9.
Build tested.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4434 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 7.
Build tested.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4433 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Revision Guide for AMD NPT Family 0Fh Processors
Rev. 3.42 March 2009, found at
http://support.amd.com/us/Processor_TechDocs/33610_PUB_Rev3%2042v3.pdf
This patch takes its data from Table 8.
Build tested, and boot tested on a AMD Athlon(tm) Dual Core Processor 5050e.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4432 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
modules.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4430 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4427 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add the respective Super I/O config in Config.lb (Winbond W83697HG),
enable COM1 on the board, fix irq_table.c, as well as the PCI
devices listed in Config.lb (based on lspci output).
This has been tested by Jakob Bornecrantz <wallbraker@gmail.com>
on hardware, i.e. there is serial output. It does not yet boot
to a Linux console successfully, more fixing will be needed.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Jakob Bornecrantz <wallbraker@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4426 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Tested on hardware, works fine.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4423 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
outl arguments go.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4422 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
dual core or
single core.
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4415 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4407 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4406 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Change the parallel port from polling to interrupt-driven.
This was tested by Andreas Mundt with a parallel port printer.
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4405 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
resource allocator.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Zheng Bao <zheng.bao@amd.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4403 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4402 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
i810 chipset. Not all hardware has been tested, but my test PC boots Linux
(via FILO) without any problems.
Also: Add support for the SMSC LPC47U33X to the generic 'smscsuperio' driver.
Signed-off-by: Michael Gold <mgold@ncf.ca>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4401 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4400 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Tested on hardware with the patch from r4398 and works fine as soon
as Linux boots (no VGA in FILO for some reason, will investigate).
In order to make the 'i810.vga' VGA blob from the vendor BIOS work
you have to make the check for PCI device ID mismatches non-fatal
(for now) in the src/devices/pci_rom.c file like this:
Index: src/devices/pci_rom.c
===================================================================
--- src/devices/pci_rom.c (Revision 4393)
+++ src/devices/pci_rom.c (Arbeitskopie)
@@ -87,7 +87,7 @@
if (dev->vendor != rom_data->vendor || dev->device != rom_data->device) {
printk_err("Device or Vendor ID mismatch Vendor %04x, Device %04x\n",
rom_data->vendor, rom_data->device);
- return NULL;
+ // return NULL;
}
printk_spew("PCI ROM Image, Class Code %04x%02x, Code Type %02x\n",
The reason is that the VGA blob thinks the proper VGA device ID is 0x7123
whereas it really is 0x7121 on hardware. There are multiple ways to work
around this (there have been many discussions in the past), we'll see which
method will be used in future...
Note: This has been tested against r4393 only for now to make sure there
are no problems because of the recent resource allocator changes, see
http://www.coreboot.org/pipermail/coreboot/2009-July/050486.html.
Tests with trunk will follow.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4399 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
At the same time also make the 82810 code handle 82810E.
- Set SMRAM register according to CONFIG_VIDEO_MB value:
- 512 means 512 KB
- 1 means 1 MB
- Every other value for CONFIG_VIDEO_MB (e.g. 0) disables VGA.
This is not very clean, changing CONFIG_VIDEO_MB to CONFIG_VIDEO_KB
in a future patch may be nicer.
- Set MISSC2 register bits as required per datasheet to make VGA work.
The code handles both 82810 and 82810E.
- northbridge.c: Add __pci_driver entry for the Intel 82810E.
Also:
- Rename PAM register #define to PAMR as per datasheet.
- Drop unused/commented code for now.
- Don't explicitly set GMCHCFG for now, the default works ok. We'll
have to figure out the proper/ideal settings later.
The code is based on a patch from Elia Yehuda <z4ziggy@gmail.com> but
has been modified quite a bit for correctness and minimalism.
Tested on hardware with a slightly modified MS-6178 target,
patches to enable onboard-VGA for MS-6178 will follow.
Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4398 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Unfortunately it still doesn't. I think it's close, though.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4397 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Turn on Parallel Port and Floppy in Config.lb
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Andreas B. Mundt <andi.mundt@web.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4396 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The major change is that the K8 registers don't get touched until the end of
resource allocation.
Fam10 code could be updated the same way.
Move VGA code before resource allocation but after device enumeration.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4395 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Major changes:
1. Separate resource allocation into:
A. Read Resources
B. Avoid fixed resources (constrain limits)
C. Allocate resources
D. Set resources
Usage notes:
Resources which have IORESOURCE_FIXED set in the flags constrain the placement
of other resources. All fixed resources will end up outside (above or below)
the allocated resources.
Domains usually start with base = 0 and limit = 2^address_bits - 1.
I've added an IOAPIC to all platforms so that the old limit of 0xfec00000 is
still there for resources. Some platforms may want to change that, but I didn't
want to break anyone's board.
Resources are allocated in a single block for memory and another for I/O.
Currently the resource allocator doesn't support holes.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4394 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
targets/supermicro/h8dmr/Config.lb and Config-abuild.lb.
Importantly, this also sets
default CONFIG_AP_CODE_IN_CAR=0
in
src/mainboard/supermicro/h8dmr/Options.lb
which is required to make this box boot since the changes that went in in
r4315.
At Myles' suggestion, this patch also sets
default CONFIG_USE_FAILOVER_IMAGE=0
default CONFIG_USE_FALLBACK_IMAGE=0
default CONFIG_XIP_ROM_SIZE=CONFIG_FAILOVER_SIZE
in src/mainboard/supermicro/h8dmr/Options.lb to simplify
targets/supermicro/h8dmr/Config.lb a bit further.
Build tested with abuild, boot tested on physical hardware.
Signed-off-by: Ward Vandewege <ward@gnu.org>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4393 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Thomas Jourdan <thomas.jourdan@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4392 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Thanks to Thomas Jourdan <thomas.jourdan@gmail.com> for reporting it.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4391 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
didn't build before, and it still doesn't)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4387 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Attached is the third revision of the CN400/EPIA-N(L) patch for CB V2.
Patch should work against r4381 (or later ?)
This version now boots all of the way through to attempting to launch a
payload (I'm trying FILO right now), where it falls over with exception
6 (invalid opcode)
The coreboot_table issue seems to have been automagically resolved by
the latest core files.
It may still be that the reason for the payload not starting is down to
some issue with the tables initialising, I'll look closer at that.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4386 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Coreboot used to take SYSTEM_TYPE as a lable to tell what the socket is.
This patch replaces (some of, not all) CONFIG_SYSTEM_TYPE with CONFIG_SOCKET_TYPE.
It also fix some compiling error in src/northbridge/amd/amdmct/mct/mctardk4.c
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Marc Jones <marcj303@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Kconfig)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4384 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
It's basically done with the following script and some manual fixup:
VARS=`grep ^define src/config/Options.lb | cut -f2 -d\ | grep -v ^CONFIG | grep -v ^COREBOOT |grep -v ^CC`
for VAR in $VARS; do
find . -name .svn -prune -o -type f -exec perl -pi -e "s/(^|[^0-9a-zA-Z_]+)$VAR($|[^0-9a-zA-Z_]+)/\1CONFIG_$VAR\2/g" {} \;
done
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4381 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Tested on hardware by Andrew Morgan <ziltro@ziltro.com>, boots
Linux fine. Detailed status at:
http://www.coreboot.org/Soyo_SY-6BA_Plus_III
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Andrew Morgan <ziltro@ziltro.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4369 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Its used for Name and Scope and Processor now. As bonus, it allows to
create a multi name paths too. Like Scope(\ALL.YOUR.BASE).
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4368 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Fix configuration of all boards. (Abuild tested)
Hopefully fix compilation of PPC boards (they've never compiled for me.)
Apologize profusely.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4367 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4366 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Also, enable HIGH_TABLES support for this board.
The HIGH_TABLES failed with:
No matching ram area found for range:
[0x00000000000f0000, 0x0000000000100000)
Ram areas
[0x0000000000000000, 0x0000000000001000) Reserved
[0x0000000000001000, 0x00000000000a0000) RAM
[0x0000000000100000, 0x000000000fff0000) RAM
[0x000000000fff0000, 0x0000000010000000) Reserved
SELFBOOT RETURNED!
Boot failed.
The fix was to change northbridge.c as follows:
- ram_resource(dev, idx++, 1024, tolmk - 1024);
+ ram_resource(dev, idx++, 768, tolmk - 768);
This is build-tested and tested on hardware by me. It boots fine,
for instace with SeaBIOS and the standard GRUB1 from my disk.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4365 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Add initial ACPI support for M57SLI.
Activates/Enables:
* native Coreboot ACPI for M57SLI
* Soft-Power-Off
* PowerNow!
* High Precision Event Timer
* Windows booting with ACPI support
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4364 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Fix interrupt handling in mptable.c on M57SLI.
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4362 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Activate HIGH_TABES on M57SLI
Signed-off-by: Harald Gutmann <harald.gutmann@gmx.net>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4361 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Abuild tested with -C.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4360 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Removed c2 HT Phy 520a/530a reserved bit.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4359 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
updating the passed value to the next link offset even when it was on the
requested link (cap_count).
Maximilian also found a bug where the linktype was still getting attributes
even when it wasn't initialized.
This should fix the HT problems for Fam10 C2. There are still issues with the
microcode which need to be resolved.
Signed-off-by: Marc Jones <marcj303@gmail.com>
Acked-by: Ward Vandewege <ward@gnu.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4358 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
ways superior to v3, while lacking its completeness. But, one nice
thing: no more included .S or .c files. It's all separate compilation.
That should allow our Makefiles to work much better.
Note that the current non-CAR implementation is the default and
continues to work (tested FILO boot to Linux on both CAR and non-CAR).
Index: src/mainboard/emulation/qemu-x86/Config.lb
Change this to be sensitive to USE_DCACHE_RAM. All settings etc. that
depend on this variable are grouped in one if, and the other parts
(romcc etc.) are in the else. This change is a model of how we should be
able to do other motherboards.
Index: src/mainboard/emulation/qemu-x86/Options.lb
add needed options.
Index: src/mainboard/emulation/qemu-x86/failover.c
remove code inclusion from this not-yet-used file.
Index: src/mainboard/emulation/qemu-x86/rom.c
This is the entry point for the rom-based code. Called stage1.c in v3.
Index: src/lib/Config.lb
change initobject to a .o from a .c; this fixed a build problem.
Index: src/pc80/serial.c
make uart_init non-static.
Index: src/pc80/Config.lb
add initobject
Index: src/arch/i386/init/entry.S
Entry point. Unify a bunch of files that were fiddly lttle includes. From v3.
Index: src/arch/i386/init/ldscript.ld
new file. The goal is to hang all init changes for CAR here, to minimize other changes to any
other ldscript. Besides, putting this in init makes sense; entry and car are manage init.
Index: src/arch/i386/init/car.S
generic i386 car code from v3.
Index: src/arch/i386/init/ldscript_fallback_cbfs.lb
Fix what looks like a bug: this was not including the init.text section.
Index: targets/emulation/qemu-x86/Config.lb
push up the console loglevel. qemu is for debugging so we might as well
get all the debugging we can.
Index: targets/emulation/qemu-x86/Config-car.lb
For CAR bullds.
Signed-off-by: Ronald G. minnich <rminnich@gmail.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Abuild tested and boot tested on s2895 and serengeti_cheetah.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4355 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
gets us through config, but it fails during build because the original patch
duplicated some files for VIA systems.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4354 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
if it is already in its correct location.
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4353 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
- Make get_dsdt script executable.
- Rename DrivingClkPhaseData.c to driving_clk_phase_data.c.
- Set proper IRQ_SLOT_COUNT value in the hope that the '14' from irq_table.c
is correct.
- Fix broken or incorrect #include names to increase likelyhood of a
successful compile.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4350 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
EPIA-M700 target.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4349 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
files for targets without failover:
src/config/nofailovercalculation.lb (64 kB XIP)
src/config/nofailovercalculation128.lb (128 kB XIP)
Targets with other XIP sizes were ignored.
This patch moves XIP size back into mainboard code.
Benefits from this patch:
- src/config/nofailovercalculation128.lb is no longer needed
- Targets with XIP sizes besides 64k and 128k benefit from refactoring
- Conceptually, this makes the include files pure calculation files
without settings.
Abuild tested.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4348 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
same. The errata need some extra room in failover.
Trivial and abuild tested
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4347 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Compared to posted patch, there are whitespace fixes
(request by Uwe), and a guard to run the erratum only
on AMD_RB_C2 (request by Marc).
Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4346 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Signed-off-by: Marco Schmidt <mashpb@gmail.com>
Acked-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4345 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
instead of coreboot.strip. That fixes the normal
image because the calculations for its offset in
the ROM match reality again.
This requires changes in CBFS configurations to
minimize the bootblock size. These are also done
for CBFS boards.
Other than this a couple of minor fixes are in this
patch:
- make asus/m2v-mx_se build with abuild with a
crosscompiler
- move CONFIG_CBFS for hp/dl145_g3 to Options.lb
as it's done everywhere else
- change the default config of abuild to not
provide ROM_IMAGE_SIZE values for the images
in a CBFS configuration
- change abuild's crosscompile autodetection to
not try to use "i386-elf-i386-elf-gcc" (which
is bogus)
Except for the latter two abuild changes (both
in util/abuild/abuild), they're available as
patch set on the mailing list in a mail from
2009-06-05 titled
[PATCH]es to get normal image to work again with CBFS
The changes in util/abuild/abuild are trivial and
abuild tested.
As discussed on the list,
targets/hp/dl145_g3/Config-abuild.lb is
deleted, now that Config.lb works again.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4344 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Change all printk_raminit to printk_spew.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4343 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
The patch has been submitted by bari <bari@onelabs.com> and written
by OLPC.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4342 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
them a bit more verbose and hopefully more understandable.
Old messages for my machine with 5 GB:
RAM: 0x00400000 kB
Ram3
[...]
Initializing memory: done
RAM: 0x00500000 kB
New messages:
RAM end at 0x00400000 kB
Adjusting lower RAM end
Lower RAM end at 0x003f0000 kB
Ram3
[...]
Initializing memory: done
Handling memory hole at 0x00300000 (default)
RAM end at 0x00500000 kB
Handling memory mapped above 4 GB
Upper RAM end at 0x00500000 kB
Correcting memory amount mapped below 4 GB
Adjusting lower RAM end
Lower RAM end at 0x00300000 kB
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Myles Watson <mylesgw@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4341 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
Any endless loop after die() can be eliminated.
Dereferencing a NULL pointer is bad. die() instead.
Replace endless loops with die().
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4340 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
starts to play its role. Then the system hangs at HDA init. I dont know what the
VC1 is. The RPR says "Optional Features (only needed if CMOS option is enabled)"
in 5.10.2. Before I know what it is, I think it is better to skip it.
Tested on dbm690t.
Add comment from Rudolf,
"
VC is virtual channel. Its used for isochronous transfer of data to sound card.
The virtual channel guarantee "on time" delivery. In other words it sets up a
channel for data to sound card, which means that that arrivs in time and there will
be no interuptions in audio stream.
http://www.microsoft.com/whdc/connect/pci/wlp_interrupt.mspx
"
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4339 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
function based on test results with many different DIMMs.
Tested by Uwe Hermann <uwe@hermann-uwe.de> on hardware.
Might need a small increase of ROM_IMAGE_SIZE for some boards, we'll see.
Signed-off-by: Elia Yehuda <z4ziggy@gmail.com>
Acked-by: Corey Osgood <corey.osgood@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4338 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
code, specifically the difference between pre_f and f code.
The only functional changes are in printk statements. The rest is white space.
1. Remove some #if 0 and #if 1 blocks
2. Remove #if USE_DCACHE_RAM blocks. All K8 boards use CAR.
2. Correct typos (canidate -> candidate)
3. Try to minimize the differences between amdk8_f.h and amdk8_pre_f.h
4. Try to minimize the differences between raminit.c and raminit_f.c
5. Make boards that have rev_f processors include the correct raminit code
There is much more that could be done, but it's a start.
Abuild tested and boot tested on s2892 and serengeti_cheetah.
Signed-off-by: Myles Watson <mylesgw@gmail.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4337 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
1. In rs690_cmn.c, mask the lower 4 bits of the BAR3. No doubt, right?
2. In rs690_pcie.c,
(1) Obviously, the mask should be 0xF, and bit 19 should be set to 1 (in comment).
In rpr 5.10.2, step 2, step 2.1 & step 2.6
(2) The dynamic buffer allocation is enabled by setting bit 11 of PCIEIND: 0x20,
instead of PCIEIND_P: 0x20.
In rpr 5.10.2, step 5. Dynamic Slave CPL Buffer Allocation
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4336 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
|
This reverts commit eb7bb49eb5b48c39baf7a256b7c74e23e3da5660.
Stepan pointed out that "s" means string, which makes the following statement
in this commit message invalid: "Since we either have reserved space (which
we shouldn't do anything with in these two functions), an enum or a
hexadecimal value, unsigned int seemed like the way to go."
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Acked-by: Luc Verhaegen <libv@skynet.be>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4335 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
|
