summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2019-08-03riscv: add support for OpenSBIXiang Wang
Call OpenSBI in M-Mode and use it to set up SBI and to lockdown the platform. It will also jump to the specified payload when done. This behaviour is similar to BL31 on aarch31. The payload is 41KiB in size on qemu. Tested on qemu-riscv: Required to boot a kernel as OpenSBI's instruction emulation feature is required on that virtual machine. Tested on SiFive/unleashed: The earlycon is working. No console after regular serial driver should take over, which might be related to kernel config. Change-Id: I2a178595bd2aa2e1f114cbc69e8eadd46955b54d Signed-off-by: Xiang Wang <merle@hardenedlinux.org> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-08-03mb/google/hatch: Enable PmTimerDisabled config to reduce S0ix power usageSubrata Banik
BRANCH=none BUG=b:138152075 TEST=Build for cometlake board with the PmTimerDisabled policy in devicetree set to 1. With PmTimerDisabled = 0 >> iotools mmio_read8 0xfe0018fc 0x00 With PmTimerDisabled = 1 >> iotools mmio_read8 0xfe0018fc 0x02 Bit 1: ACPI Timer Disable (ACPI_TIM_DIS): This bit determines whether the ACPI Timer is enabled to run. - 0: ACPI Timer is enabled - 1: ACPI Timer is disabled Change-Id: I83f49505a804c99d7978e5d541ea9fe8ead9b88f Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34611 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-08-02device/pci_ops: Make PCI_BDF() available in all stagesKyösti Mälkki
Caller needs to take into account that bus numbers may have not been assigned yet. Same issue existed before with early ramstage and mostly does not cause problems when used with static devices on bus 0. Change-Id: I4865b4277dbc858c8c2ffd2052defcaa1a92173c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34614 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02src/arch/x86/acpi: Constify struct device instancesAamir Bohra
Constify the struct device arguments in below APIs: > acpi_device_name > acpi_device_path_fill > acpi_device_path > acpi_write_dbg2_pci_uart > acpi_device_scope > acpi_device_path_join The APIs do not seem to modify the argument and are using device argument as reference to device only. Change-Id: Ic2ce045f17efa288eb41503795723d0ad5ec78bd Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34625 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02mb/google/hatch: Fine-tune Kohaku I2C CLK frequencyPhilip Chen
Add rise time / fall time to I2C config in device tree to ensure I2C CLK runs accurately at I2C_SPEED_FAST (400 kHz). BUG=b:138258384 BRANCH=none TEST=probe I2C0/I2C2/I2C3 SCL on Kohaku board, verify all of them run at 395-399 kHz. Change-Id: Id98079e717f0db3fdcb88f85e45693925d11d7fd Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34559 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02vc/cavium/bdk/libbdk-hal: Fix eye data memory leakJacob Garber
This function can capture and allocate its own eye data, so in that case set need_free to true so it is freed at the end. Change-Id: I63ca6d743e6610d3e3ab6bd7b0356aabdfa6f784 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393969 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34591 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-08-02soc/samsung/exynos5420: Refactor fimd vidtcon accessJacob Garber
Accessing the higher vidtcon variables using pointer arithmetic from the lower address FIMD_CTRL struct is undefined behaviour, since pointers manipulations are not allowed outside the objects they point to. The standard-blessed way is to perform the arithmetic using integer addresses first, and then convert that to a pointer. The end result is the same, but avoids the risk of unsafe optimizations from an over-zealous compiler. Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402096, 1402124, 1402131, 1402169 Change-Id: I13ed23836e8e9076ae0bfd88c05c4f2badac9c49 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-02mediatek: Refactor I2C code among similar SOCsQii Wang
Refactor I2C code which will be reused among similar SOCs. BUG=b:80501386 BRANCH=none TEST=emerge-elm coreboot Change-Id: I407d5e2a9eb29562b40bb300e39f206a94afe76c Signed-off-by: qii wang <qii.wang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30975 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-08-02soc/intel/cannonlake: Enable ACPI timer emulation if PM timer is disabledAamir Bohra
Add a check to enable ACPI timer emulation only when the APCI PM timer is disabled. Change-Id: I21c0b89218d0df9336e0b0e15f1b575b8508fb96 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34563 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-08-02stage_cache: Add more empty stubs functionsKyösti Mälkki
Added for symmetry with other stage_cache_add() command variants, currently for amd/stoneyridge. Change-Id: I580054104a61f1b03ba36a7c97ad4411c3d29855 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34651 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/cannonlake: Disable ACPI PM timer to reduce S0ix power usageSubrata Banik
This patch overrides EnableTcoTimer FSP UPD default value based on PmTimerDisabled coreboot devcietree config. BRANCH=none BUG=b:138152075 Change-Id: I347c15c7b65fb4c19b9680f127980d4ddab8df51 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-08-02soc/intel/common/pch: Move thermal kconfig selection into common/pchSubrata Banik
This patch moves SOC_INTEL_COMMON_BLOCK_THERMAL selection from respective soc/intel/{skl/cnl/icl} to common/pch/Kconfig. Change-Id: I7c9c8a87cfc5cb4c2fa8b215e56cc35c1f0cce28 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34650 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/icelake: Make use of common thermal code for ICLSubrata Banik
This patch ports CB:34522 and CB:33147 changes from CNL to ICL. TEST=Build and boot dragonegg Change-Id: I0b983005f16fe182e634eac63fef4f6b22197a85 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34649 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-02soc/intel/skylake: Make use of common thermal code for SKLSubrata Banik
This patch ensures skylake soc is using common thermal code from intel common block. TEST=Build and boot soraka Change-Id: I0812daa3536051918ccac973fde8d7f4f949609d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34648 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-01soc/intel/cannonlake/bootblock: Clear the GPI IS & IE registersDavid Wu
Clear the GPI Interrupt Status & Enable registers to prevent any interrupt storms due to GPI. BUG=b:138282962 TEST=Ensure that the Interrupt status & enable registers are reset during the boot-up when the system is brought out of G3, S5 & S3. Ensure that the system boots fine to ChromeOS. Change-Id: I2185355d0095601e0778b6bf47ae137cc53e4051 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-31mb/google/hatch: Initialize SSD GPIOs in bootblockShelley Chen
Moving these to bootblock as we are seeing some instances where devices are rebooting into the recovery broken screen with the 0x5a error (no bootable storage device in system). This needed to be done for KBL platforms and never got transferred to hatch. Please reference https://review.coreboot.org/c/coreboot/+/23647 BUG=b:137681648 BRANCH=None TEST=Run autotest faft_bios and faft_ec suites Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/kohaku: Update DPTF parameters and TDP PL1/PL2Seunghwan Kim
Applying first tuned DPTF parameters and TDP PL1/PL2 values for kohaku. More fine-tuning will happen later. BUG=b:1704071 BRANCH=none TEST=build Change-Id: I8a87ff88e8e14ada473f9da59c15cdc779cbb108 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34397 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/intel/skl: Add C232 chipset and reorder IDsFelix Singer
This patch ... - adds the PCH ID for C232 chipset, - renames "Premium" chipset to "HM170" (because of same IDs), - reorders the Skylake-H PCH IDs ascending by hex values. Used documents: - Intel 332690-005EN Change-Id: I859975fe7bcd3c10dead8fe150a2fbead9c64a51 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-31drivers/crb: Add CRB driver for TPM2 supportChristian Walter
Add the Command Response Buffer which is defined in the TPM 2.0 Specs. CRB can be specified with MAINBOARD_HAS_CRB_TPM, even though it is actually SoC/SB specific. Change-Id: I477e45963fe3cdbc02cda9ae99c19142747e4b46 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-31src/drivers/intel/ptt: Add PTT SupportChristian Walter
Add function which checks if Intel Platform Trust Technology / Intel integrated TPM is enabled/active. Change-Id: If93bb5e1a3a59b5045f4e44359683876fb387a71 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34380 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31lib/bootmem: Prepare for OpenSBIPatrick Rudolph
Add a new bootmem memory type OpenSBI. It's similar to BL31 on aarch64. Required for OpenSBI integration. Change-Id: I5ceafd5a295f4284e99e12f7ea2aa4c6d1dbb188 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-31soc/intel/cannonlake: Enable FSP to use coreboot stack for cometlakeAamir Bohra
FSP v1263 for CML supports FSP to use coreboot stack. This change selects common stack config, that enables coreboot to support share stack with FSP. BUG=b:133398276 Change-Id: I4098a4374363ca6f3c86c396d097f9eabc9a28fe Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34130 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/amd/stoneyridge: Change code to accommodate Merlin Falcon SOCRichard Spiegel
Stoney Ridge is family 15h models 70h-7Fh, Merlin Falcon is family 15h models 60h-6Fh. Add changes based on config parameter SOC_AMD_MERLINFALCON to make the code backward compatible with Merlin Falcon. BUG=none. TEST=Tested later with padmelon board. Change-Id: I00fe832324500bcb07fca292a0a55f7258a2d82f Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33624 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/intel/common/block/lpss: Correct the PCI device referenceAamir Bohra
The initial implementation was assigning the devfn as PCI device reference directly which was incorrect. Change-Id: Iad57e9bc6b2acf1823ee38116aea8a93feece6f9 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-31device: Constify `dev` argument to (probe|find)_resource()Nico Huber
Change-Id: I7abca61db61d2f2df149ca601631c45d8c4f342e Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34613 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/hatch/variants/hatch: Set PCH Thermal Threshold value to 77 deg CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown when S0ix is enabled. BUG=133345634 BRANCH=None TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Hatch. Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/intel/cannonlake: Enable PCH Thermal Sensor configuration for S0ixSumeet Pawnikar
Enable PCH thermal sensor for dynamic thermal shutdown for S0ix state. BUG=None BRANCH=None TEST=Verified Thermal Device (B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE. Change-Id: I50796bcf9e0d5a65cd7ba63fedd932967c4c1ff9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34522 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31soc/intel/common/block: Enable PCH Thermal Sensor for threshold configurationSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal shutdown when S0ix is enabled. BUG=None BRANCH=None TEST=Verified Thermal Device (B0: D18: F0) TSPM offset 0x1c [LTT (8:0)] value is 0xFE. Change-Id: Ibd1e669fcbfe8dc6e6e5556aa5b1373ed19c3685 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33129 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/kukui: Enable config for coreboot displayYongqiang Niu
BUG=b:80501386,b:117254947 BRANCH=none TEST=Boots correctly on Kukui Change-Id: I478e06686158dd77b075bcef8a41763ae26c79f9 Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31521 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override DDI1 DDC SDA/SCL for HDMIWisley Chen
The device Dorp uses the variant Meep, and supports HDMI. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I59ba2e56cf2f83ca9d533454570bcdd39c0a2e7c Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34509 Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/octopus: Override VBT selection for DorpWisley Chen
For dorp HDMI sku, select VBT which enables HDMI output. -sku33 (HDMI) -sku34 (HDMI + keyboard backlight) -sku35 (HDMI + Touchscreen) -sku36 (HDMI + keyboard backlight + Touchscreen) Cq-Depend: chrome-internal:1502253 BUG=b:136522841 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: I62262378f85bb899073ffac7804be876e649e429 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2019-07-30soc/intel/cnl: Only print ME status one timeTim Wawrzynczak
There were two hooks in the boot state machine which dumped the ME status to the debug UART, which is unnecessary. Removed the hook for the BS_OS_RESUME_CHECK state, leaving just BS_PAYLOAD_LOAD, which is called before FspNotifyEndOfFirmware, as required. BUG=b:138463532 BRANCH=none TEST=Boot up, check cbmem to ensure the ME status messages are only printed one time. Change-Id: I86bc6e33de4096f33023730ffabb25715c985de0 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-30mb/google/hatch: Enable chipset_lockdown coreboot config for hatchSubrata Banik
This patch enables lockdown configuration for hatch family (hatch, kindred, helios and kohaku) BUG=b:138200201 Change-Id: Ia6dc90156dc76fde490b25cf833da3cf80f664f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-30soc/intel/cannonlake: Allow coreboot to handle required chipset lockdownSubrata Banik
This patch disables FSP-S chipset lockdown UPDs and lets coreboot perform chipset lockdown in ramstage. BUG=b:138200201 TEST=FSP debug build suggests those UPDs are disable now. Change-Id: I7e53c4e4987a7b0e7f475c92b0f797d94fdd60f4 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-30AUTHORS: Move src/acpi copyrights into AUTHORS fileMartin Roth
As discussed on the mailing list and voted upon, the coreboot project is going to move the majority of copyrights out of the headers and into an AUTHORS file. This will happen a bit at a time, as we'll be unifying license headers at the same time. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Id3382d19088cba2703350339b0bd0cfb3c0e63b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34604 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-30soc/intel/cannonlake: Add new PCI IDsFelix Singer
* PCH IDs: H310, H370, Z390, B360, C242, HM370 * IGD IDs: Another variant of UHD-Graphics 630 * MCH/CPU IDs: Used at i3-8100 Used documents: * 337347-005 TESTED=Gigabyte Z390M Gaming Change-Id: I5be88ef23359c6429b18f17bcffbffb7f10ba028 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34600 Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-30mb/google/hatch: Add option to enable WiFi SAR configsFurquan Shaikh
This change adds a user selectable option to enable all WiFi SAR configs that apply to hatch. BUG=b:138177048 Change-Id: I4b72f90896841e7c556d4a1b8cdad8ca89d01021 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-30nb/amd/amdht: Use standard coreboot assertionsJacob Garber
The amdht code currently relies on an idiosyncratic ASSERT() macro, which actually doesn't do anything right now, and even it did would only print a janky error message. Replace this with the normal ASSERT() macro from <assert.h>. The default behaviour now is to print an error message but do nothing else, and failed assertions will only halt if you enable FATAL_ASSERT, in which case, well, you asked for it. Change-Id: I6db7565171a345f9afbc9fb37cff8fda58f942df Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402076 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-30soc/intel/{broad,cannon,sky}: Fix possible out-of-bounds readsJacob Garber
There will be a possible out of bounds array access if power_limit_1_time == ARRAY_SIZE(power_limit_time_sec_to_msr), so prevent that in the index check. This issue was fixed for other cpus in commit 5cfef13f8d (cpu/intel: Fix out-of-bounds read due to off-by-one in condition). Based on the discussion for that commit, also remove the magic constant 28 in favour of the index of the last array element. Change-Id: Ic3f8735b23a368f8a9395757bd52c2c40088afa1 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229673 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34498 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-30vc/cavium/{bdk,include}: Clean up bdk_phys_to_ptr() callsJacob Garber
The bdk_phys_to_ptr() function converts a uint64_t address to a void * pointer. Judging by the comments, the old implementation had a check that would refuse to convert a null pointer, which required several workarounds when trying to convert the address 0 to a pointer. This isn't the case for coreboot though, which implements this function as a simple (void *) cast, so we can remove the old workarounds. Change-Id: I6537d1699e6726c1fb155d69a51e14da856232de Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393962 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34590 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-30vc/cavium/bdk/libdram: Add array bounds checkJacob Garber
Ensure that best_en_idx is within bounds before accessing the _en array. Change-Id: Ifa6259e28875a8cf8199896bda7982370ccaa277 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393971 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34593 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-30vc/cavium/bdk/libdram: Remove unused assignmentJacob Garber
The total number of errors is only needed after a final tuning run at the end of this function, so we can remove this unneeded store for earlier runs. Change-Id: I62adb38ccba98d90bcf8ccd13998762b9b694111 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393967 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-30mb/emulation/qemu-riscv: Protect CBFS from payload loaderPatrick Rudolph
The virt machine is special as it doesn't emulate flash and it puts the coreboot.rom at start of DRAM. The payload loader doesn't know about CBFS in DRAM and overwrites the CBFS while decompressing payloads, resulting in undefined behaviour. Mark the region as SRAM to make sure the payload won't overwrite the CBFS while decompressing. As payload is always decompressed to DRAM, it wouldn't touch SRAM memory regions. Change-Id: I36a18cb727f660ac9e77df413026627ea160c1e1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29mb/emulation/qemu-riscv: Fix regressionPatrick Rudolph
Fix regression introduced in bd4bcab "lib: Rewrite qemu-armv7 ramdetect". The detected DRAM size is in MiB, thus needs to adjusted accordingly before passed to ram_resource. Wasn't seen earlier as everything works, except payload loading. Change-Id: I4931372f530e7b4e453a01e5595d15d95a544803 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34601 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2019-07-29Revert "src/security/vboot: Add option to skip display init with vboot 2.0"Christian Walter
This reverts commit 598af2e2c2785c00eb4290cdcefe1082b2a6f858. Reason for revert: This commit breaks every board with VBOOT enabled if the platform is apollolake, broadwell, skylake, baswell, baytrails or icelake. The reason is, that the SoC selects VBOOT_MUST_REQUEST_DISPLAY by default, and this has a dependency now on VBOOT_MAY_SKIP_DISPLAY_INIT. This will only be auto-selected if it is a CHROMEOS platform. Change-Id: I3872d9aa993326ded135d8a5d950d5b1b1eddf34 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34308 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29src/superio/nuvoton: Add support for NCT5539DPavel Sayekat
Values taken from NCT5539D datasheet V1.1 (June 30th, 2015). Change-Id: I7e979bde53ce3dac1a4f74e7e51a3c6a0149051c Signed-off-by: Pavel Sayekat <pavelsayekat@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33842 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29Revert "soc/intel/common: Set controller state to active in uart init"Christian Walter
This reverts commit 46445155ea21b0aa9106e12a00b9b1d89887a461. Reason for revert: Breaks coreboot. Either no UART working or the complete boot process stops. Platform: Intel Apollolake, tested on Up Squared Change-Id: If581f42e423caa76deb4ecf67296a7c2f1f7705d Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-29soc/qualcomm/qcs405: Handle invalid QUP and BLSPJacob Garber
Print an error message and return if an invalid QUP or BLSP is encountered. This prevents a possible null pointer dereference of spi_clk. Change-Id: I374e15ce899c651df9c2d3e0f1ec646e33d4bdb2 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1401086 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-29soc/intel/baytrail: Prevent unintended sign extensionsJacob Garber
Consider the following assignment: u64 = s32 For positive values this is fine, but if the s32 is negative, it will be sign-extended in the conversion to a very large unsigned integer. This manifests itself in two ways in the following code: First, gpu_pipe{a,b}_port_select are defined as int, and can have the values 1 or 2. In the case when they have the value 2, the shift 2 << 30 will be a negative number, making it susceptible to the sign-extension problem above. Change these variables to something more reasonable like a uint8_t, which is unsigned. Second, in any bit shift, any variable with width less than an int will be implicitly promoted to an int before performing the bit shift. For example, the variable gpu_pipea_power_on_delay is a uint16_t, and if its highest bit is set, the shift gpu_pipea_power_on_delay << 16 will become negative, again introducing the above problem. To prevent this, cast all smaller variables to a u32 before the shift, which will prevent the implicit promotions and sign extensions. Change-Id: Ic5db6001504cefb501dee199590a0e961a15771b Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1229699, 1229700, 1229701, 1229702 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34487 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Alexander Couzens <lynxis@fe80.eu> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29src/mainboard/{cavium,sifive}: Use $(obj) instead of buildRaul E Rangel
The build directory might not exist in the src dir. BUG=b:112267918 TEST=make what-jenkins-does Change-Id: I2d4fa6cc455592f92070796cd065cd66646d5ba9 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-29soc/nvidia/tegra124: Assert divisor is non-zeroJacob Garber
The logic for the calculation of plld.m is rather complicated, so do a sanity check that it is non-zero before doing the division. Change-Id: I60f49b8eed47a3de86713304bde7a4d3f3d935dd Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1260981 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-29vc/cavium/bdk/libdram: Print unknown voltagesJacob Garber
volt_str is used to print information about the RAM configuration in report_common_dimm(), so let's print out "unknown voltage" if the voltage isn't recognized rather than a garbage value. Change-Id: I8e85917fd682e166172fbf10597bde4a8a11dfc7 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1393958, 1393982 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-29haswell: reinitialize EHCI debug hardware after raminitIru Cai
Tested on Lenovo ThinkPad T440p. Change-Id: I54b0c9dbb64819f0f502783b632470d27ed0b2b1 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34358 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-29mb/google/octopus: Add keyboard backlight supportWisley Chen
Dorp device support keyboard backlight, so enable it. BUG=b:138413969 BRANCH=octopus TEST=emerge-octopus coreboot Change-Id: If0c7b22b4be2a5d5216404a6944ac887883e9a47 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Marco Chen <marcochen@google.com>
2019-07-29soc/intel/cannonlake: Correct the data type of serial_io_devAamir Bohra
Change-Id: Id974a4bb84b7d5caddece04f93bf4e830d15b576 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34466 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-28sb/intel/common/spi: Fix opmenu setupNico Huber
Remove a spurious reference: the `optype` field is already the pointer we want. Change-Id: I65eb3a519db9037c84750c5d40e3f19a1e360361 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-28riscv: Remove unused headersPatrick Rudolph
Change-Id: I4cd03e043e1bc2795b98d6ec2f88efa5b50d872b Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34141 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-28lib: Rewrite qemu-armv7 ramdetectPatrick Rudolph
* Move armv7 RAM dection to a common place * Enable it for all emulated platforms * Use 32bit probe values and restore memory even on failure * Use the new logic on the following boards: ** qemu-armv7 ** qemu-riscv Tested on qemu-system-riscv: Fixes kernel panic due to wrong memory limits reported. Change-Id: I37386c6a95bfc3b7b25aeae32c6e14cff9913513 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-28mainboard/facebook/fbg1701: Add VBT binaryFrans Hendriks
Add VBT 8.0.1038 binary. Panel #10 is modified to support the 1200x1920 LCD panel. This panel is configured as default. LCD and HDMI are working fine. BUG=N/A TEST=booting Facebook FBG1701 Change-Id: If327e4e071df61b02fcec45213c2b700320ef269 Signed-off-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34446 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-26sb/intel/bd82x6x: Add support to disable xHCIPatrick Rudolph
Set FD bit if xHCI is disabled in devicetree. Change-Id: I3d08ded10daea6d86857ebbbf3f8dcc85ebe9df4 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-26superio/fintek: Add f81803ARichard Spiegel
Add f81803A plus the capability to control the fan with any fintek SIO. This will be done through a common API, though currently only F81803A will have it implemented. BUG=none. TEST=Tested later with padmelon board. Change-Id: I3d336e76bccc38452b1b1aefef5d4a4f7ee129a8 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-07-26arch/ppc64: Make PPC64 stages select ARCH_PPC64Arthur Heymans
Also don't define the default as this result in spurious lines in the .config. This also cleans up an unused Kconfig file. In the generated config.h CPU_QEMU_POWER8 is gone as expected and ARCH_RAMSTAGE_PPC64 moves a few lines, but the value stays the same. Change-Id: I70b64e49e1ce07b8f30d9bbc493272bdfb3bb0bf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-07-26soc/intel/baytrail/Makefile.inc: Sort entriesAngel Pons
Change-Id: Ic35a901c8272928a0389b38a74f4eac74977a080 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34463 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-26soc/mediatek/mt8183: Init SSPMErin Lo
Load SSPM firmware and boot up SSPM. BUG=b:80501386 BRANCH=none Test=We can see "SSPM is alive" in ATF stage if SSPM enabled and ipi success Change-Id: I9285034fc8ce38b40134f5eb7b986a663175e620 Signed-off-by: Erin Lo <erin.lo@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31835 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26soc/nvidia/tegra124: Correct bitwise operatorsJacob Garber
We are treating reg_val like a bit mask, so use bitwise or instead of boolean or, and use |= to enable certain bits instead of overwriting the whole variable. Change-Id: Ia8c0ea5a58e25b3b58ed82caba20f8e49a30fb68 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1287070 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-07-26mb/google/hatch/helios: Update GPIO and device treeTim Wawrzynczak
Based on updated schematics, change polarity of USI_INT, and add the reset and enable GPIOs to the touchscreen ACPI node. The stop GPIO can't be used with the current implementation of _ON, as the way it's wired will cause power sequencing to fail. BUG=b:137133194, b:138240502 BRANCH=none TEST=Compiles, don't have next board rev to test with Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-26lib: add string.c to verstagePatrick Georgi
Change-Id: I5aa3bb2c72dcf127d418c989f6b63c9b1f412f08 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-26src/device/oprom: Fix bootsplash display code for optionromsJohanna Schander
So far the bootsplash is only correctly rendered if the framebuffer is set up as 1024x768@16. Different resolutions did not show anything, differnent depth resulted in the distorted images. This commit removes this limit by using the actual framebuffer resolutions and combines the code for x86 and yabel. For the moment the bootsplash is still limited to VGA-OptionROM framebuffer init. It was tested in 1280x1024@32 on the wip razer blade stealth using the intel vgabios. Change-Id: I5ab7b8a0f28badaa16e25dbe807158870d06e26a Signed-off-by: Johanna Schander <coreboot@mimoja.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34537 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-26oprom/yabel: Fix comment to fix the buildKyösti Mälkki
Old comment did not match the pattern required to not flag the fall-through as an error. Change-Id: I2afaca969c295a5dc4389dad0ce898c87bb841a6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca> Reviewed-by: Johanna Schander <coreboot@mimoja.de> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-07-25ec/google/wilco: Hide wilco symbols when unusedElyes HAOUAS
This cleans up .config file from unused wilco symbols. Change-Id: I813d3fe57b97e2c1ba67e1e3674de256c2529029 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34539 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25soc/intel/fsp_broadwell_de: Fix use of config_of()Kyösti Mälkki
Change-Id: I96d423720fbe67c067373436ad250edf37939e99 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel: Guard remaining SA_DEV_ROOT definitionKyösti Mälkki
Prevent implicit cast to pointers. The compiler doesn't warn about the conversion from integer to pointer without a cast, because SA_DEV_ROOT is literally '0' and there seems to be an exception for that conversion. Change-Id: I64fc156e3b9f578414ad03a00edb7cf3e33205c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34544 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-25soc/intel/broadwell: Fix case of SA_DEV_ROOTKyösti Mälkki
Commit 71756c2 soc/intel: Expand SA_DEV_ROOT for ramstage removed SA_DEV_ROOT expanding to device pointer. We missed the case here, use __SIMPLE_DEVICE__ instead for the file. Change-Id: I4331298837afa3b8c8321da610f99f8f5fa54737 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34546 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-25mb/purism/librem_skl: use SOC_INTEL_COMMON_BLOCK_HDA_VERBMatt DeVillier
Remove old hda_verb.c code copied from intel/kblrvp7, as it's been superseded by the common block HDA implementation. Fixes a null pointer error preventing the HDA codecs from being initialized, as found in Coverity CID 1403651. Test: build/boot Librem 13v2, verify functional audio Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I2fd5363aad027f215f93964bc6a85f00fea86c88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34531 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/getac/p470: Remove unneeded whitespacesElyes HAOUAS
Change-Id: I8e36dc1553faa618aa852c06861029b4c0bdb27a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-07-25soc/{qualcomm,rockchip}: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: Iab605f6be4a48c10fa5aae7a1222520149ad1392 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33691 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/mediatek: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: Id6d881055826044d04843ba165641131b9111342 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33690 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/nvidia: Use 'include <stdlib.h>' when appropriateElyes HAOUAS
Also including <types.h>, is supposed to provide stdint and stddef. Change-Id: I812d468c68b31917da5d406e2fb3b84bc6331b69 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-07-25soc/qualcomm/ipq806x: Remove unnecessary allocationJacob Garber
The bus variable doesn't live outside the scope of this function, and is only used as a convenient way for passing the pointers to all the sub-functions, so it doesn't need to be allocated. Put it on the stack instead. Change-Id: I4370d77445952731d20f7d9a91803612f4d21aef Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294801 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34499 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/intel/cannonlake: Split the "internal PME" wake-up into more detailPaul Fagerburg
The "internal PME" wake-up source could be from integrated LAN, HD audio/audio DSP, SATA, XHCI, CNVi, or an ME maskable host wake. chromium:1680839 adds USB port details to the wake-up when the XHCI causes the wake-up. Expand the logging for wake-up details to identify and log the other wake-up sources with more details. Note that wake on Integrated LAN (GbE), SATA, and ME Maskable Host Wake are not in use on Hatch, so these will not be tested. BUG=b:128936450 BRANCH=none TEST=``FW_NAME=hatch emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage`` Ensure /build/hatch/firmware/image-hatch.serial.bin has been built. Program image-hatch.serial.bin into the DUT using flashrom. Switch the DUT to the console (Ctrl-Alt-F2, or use the AP console via servo). XHCI USB 2.0 * Plug a USB keyboard into a USB-A port * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Press a key on the USB keyboard * ``mosys eventlog list`` shows: 12 | 2019-06-26 14:52:23 | S0ix Enter 13 | 2019-06-26 14:53:07 | S0ix Exit 14 | 2019-06-26 14:53:07 | Wake Source | PME - XHCI (USB 2.0 port) | 3 15 | 2019-06-26 14:53:07 | Wake Source | GPE # | 109 CNVi (connected to Wi-Fi): * Enable wake on disconnect via ``iw phy0 wowlan enable disconnect`` * Set up a hotspot on an Android phone * Connect the Chromebook to th hotspot * ``powerd_dbus_suspend`` * Verify low power mode by issuing the ``powerinfo`` command on the EC console (via servo). Expect to see ``power state 4 = S0ix``. * Turn off the hotspot on the phone * ``mosys eventlog list`` shows: 8 | 2019-07-11 10:58:17 | S0ix Enter 9 | 2019-07-11 10:59:17 | S0ix Exit 10 | 2019-07-11 10:59:17 | Wake Source | PME - WIFI | 0 11 | 2019-07-11 10:59:17 | Wake Source | GPE # | 109 XHCI USB 3.0 * TBD HD Audio * TBD Change-Id: I2c71f6a56b4e1658a7427f67fa78af773b97ec7f Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34289 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/google/poppy/variant/nami: add sku ids of bardRen Kuo
add two sku ids of bard: 0x1009CE0 0x1009CE2 BUG=b:137892804 TEST=emerge-nami coreboot Change-Id: I299ccb36739d83e38f37e0b2cbba44c34343c975 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/nvidia/tegra210: Prevent unintended sign extensionJacob Garber
The perennial problem with u16 << 16 strikes again - the u16 is implicitly promoted to an int before the shift, which will then become negative if the highest bit of the u16 was set. Normally this isn't much of a problem, but in this case tegra_dsi_writel() expects a 64 bit integer for that argument, and so it will be sign-extended to a very large unsigned integer if it is negative. Cast bytes to a u32 beforehand to prevent the implicit promotion and thus this problem. Change-Id: Iaf0fb1040ccafafde0093e9bb192c802b86cb2ac Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294800 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34529 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25soc/nvidia/tegra210: Add null pointer checkJacob Garber
Check that tx is not null before accessing it, similar to the previous if statements. Change-Id: I820cb670026bb12a54c63227aa04e778fd49c66a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1294805 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34530 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25soc/rockchip/rk3399: Use 64 bits in multiplicationJacob Garber
This multiplication is of the form u64 = u32 * u32. Despite being stored in a 64 bit variable, the intermediate value is still calculated using 32 bit math, which could possibly overflow. Cast one of the variables to a u64 to ensure it uses 64 bit math instead to avoid this. Change-Id: Ib08624812e933fdca5a51150ab36d3be49383326 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1375443 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-07-25mb/*/chromeos.c: Remove some ENV_RAMSTAGE and __SIMPLE_DEVICE__Kyösti Mälkki
Use explicit simple PCI config accessors here. Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-25soc/intel/icelake: Add ENABLE_DISPLAY_OVER_EXT_PCIE_GFX kconfigSubrata Banik
This patch creates new kconfig option to bring display over external PCI based GFX card. This kconfig to select required kconfig which are not default selected by VGA_ROM_RUN to launch legacy oprom from pci based GFX card. Change-Id: I8ebde69e38defbe3321eb5e5bbd632c209ae2cd8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33738 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2019-07-24device: Default to VESA/linear framebuffer for ChromeOSNico Huber
Building for ChromeOS implies the use of Depthcharge which doesn't support legacy text mode. Change-Id: I7fd82bfed1e59de2de75419cfaea6f0c19cfdf5e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34483 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-24soc/intel/common: Set controller state to active in GSPI initMeera Ravindranath
Set the controller state to D0 during the GSPI sequence,this ensures the controller is up and active. BUG=b:135941367 TEST=Verify no timeouts seen during GSPI controller enumeration sequence for CML and ICL platforms. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I2f95059453ca5565a38650b147590ece4d8bf5ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/34449 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
2019-07-24soc/intel/common: Set controller state to active in uart initUsha P
Set the controller state to D0 during the uart init sequence, this ensures the controller is up and active. One more argument struct device *dev has been added to uart_lpss_init function for the same. BUG=b:135941367 TEST=Verify no timeouts seen during UART controller enumeration sequence in CML and ICL platforms. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0187267670e1dea3e1d5e83d0b29967724d6063e Reviewed-on: https://review.coreboot.org/c/coreboot/+/34447 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23include/spi-generic: Append unit to macro namesUwe Poeche
This patch appends a unit (milliseconds) to time-out macro names for better understanding the code which is using the macros. Change-Id: Ibc4beda2660a83fd5f0ed325b2ee3148c6d96639 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34384 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23sb/intel/common/spi: Increase flash erase timeoutUwe Poeche
This patch provides an increased timeout (60ms -> 1s) for SPI HW-sequencing flash erase operations. Without that the erase for MRC cache writing on siemens/mc_bdx1 sometimes goes wrong because the timeout stops waiting for flash cycle completion. It was found during continuous integration. Investigation showed that the used flash type takes sporadic (e.g. 5% of the test cycles) more time for completion of erasing operation if the ambient temperature increases. The measured time values are in range of data sheet of SPI flash. 60ms is a typical value. So increasing the value is necessary. tested on siemens/bdx1; measured time values with increased ambient temperature of flash were always smaller than worst case value of 1s. Change-Id: Id50636f9ed834ffd7810946798b300e58b2c14d2 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23include/spi-generic: move common flash timeoutsUwe Poeche
This patch moves SPI_FLASH time-outs from spi/spi_flash_internal.h for SPI SW-sequencing to include/spi-generic.h to provide also for SPI HW-sequencing. tested on siemens/bdx1 and checked if all includes of spi_flash_internal.h on other places provide an include of spi-generic.h before Change-Id: I837f1a027b836996bc42389bdf7dbab7f0e9db09 Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
Enable I2C0 in fleex then verify EMR function successfully BUG=b:135968368 BRANCH=octopus TEST=EMR function working normally with I2C0 in Grob360S. Change-Id: I784ff32418bc839bcec14fbfd7236f708828690e Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2019-07-23vboot: relocate call to vboot_save_recovery_reason_vbnvJoel Kitching
Relocate call to vboot_save_recovery_reason_vbnv and rename vb2_clear_recovery_reason_vbnv for consistency. BUG=b:124141368, b:124192753 TEST=make clean && make test-abuild BRANCH=none Change-Id: I111cc23cf3d4b16fdb058dd395ac17a97f23a53f Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23vboot: deprecate vboot_handoff structureJoel Kitching
vboot_handoff is no longer used in coreboot, and is not needed in CBMEM or cbtable. BUG=b:124141368, b:124192753 TEST=make clean && make runtests BRANCH=none Change-Id: I782d53f969dc9ae2775e3060371d06e7bf8e1af6 Signed-off-by: Joel Kitching <kitching@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33536 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-23src/lib/hexdump: Use size_t for indicesElyes HAOUAS
Spotted out using -Wconversion gcc warning option. Change-Id: I29a7ae8c499bb1e8ab7c8741b2dfb7663d82a362 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
BUG=b:136606255 Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-23mediatek/mt8183: Add md power-off flowYanjie Jiang
SRCCLKENA holds 26M clock, which will fail suspend/resume, and the SRCCLKENA is not used by mt8183, so we can simply release it for suspend/resume to work. BUG=b:80501386 BRANCH=none Test=Boots correctly on Kukui, suspend test pass. Change-Id: Ib6e11faeb6936a1dd6bbe8b1a8b612446bf51082 Signed-off-by: Yanjie.jiang <yanjie.jiang@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32666 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22soc/mediatek/mt8183: Support SSPMErin Lo
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. BUG=b:80501386 BRANCH=none Test=Build pass Change-Id: I4ae6034454326f5115cd3948819adc448b67fb1c Signed-off-by: Erin Lo <erin.lo@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31516 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-22soc/intel/broadwell: Change variable back to u32Jacob Garber
commit bde6d309df (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to pointer) accidentally changed the type of reg32 to a u8 *, so change it back to a u32. Change-Id: If6beff17ed3ddf85889aba5f41d1ba112cd74075 Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1402160 Reviewed-on: https://review.coreboot.org/c/coreboot/+/34486 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-24 20:08:00 +0000