| Age | Commit message (Collapse) | Author |
|---|
|
Remove the secmon Kconfig guard from Makefiles that add to the secmon
class since they are redundant (the class is simply not used when
compiling without secmon) to improve readability/ease-of-use.
[pg: taken out of the patch linked below]
Change-Id: I2f0ad8a923ca32fcade748ac8ee50c23cf9bafb9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10241
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Reorganize Kconfig (split out from the original patch linked below)
Change-Id: I84ec8e453dd7a3980de95a455ad21494c601a98c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 5067e47bc03f04ad2dba044f022716e0fc62bb9e
Original-Change-Id: I1b2038acc0d054716a3c580ce97ea8e9a45abfa2
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/270783
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10240
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: Ic157a6a580d7a5048ac28155e0d6b3433bbd1f2c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10239
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
My main payload is GRUB and I load SeaBIOS as secondary payload when for some
reason I want to boot windows. In this scenario SeaBIOS runs VGA oprom
(SeaVGABIOS is not good enough with intel gfx). VGA oprom expects either
completely uninited gfx or some special state in gmbus and software scratch
registers. Provide this state.
The only alternative without this patch for such usecase is to use oprom and
I'd like to avoid doing so when going my main boot path to GNU/Linux.
Change-Id: I38e78fb845e43b81df084cd4d65f4618bfb2506d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10205
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
0x20 was incorrectly represented as 4 * 5 while in fact it's 4 * 8
Change-Id: I6053a3baa6de0da9f1d648009353bc1fe542f81f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10237
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Sample code belongs to documentation, not copied 100x over prodcution code.
Change-Id: I6bb318d76057d02bd6ac5641d12d56ab6d60b745
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10229
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I3047badea8d4f61155f4e4f7d3d078426948162a
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10228
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The vboot_context.h file hasn't been used since commit
6d65f796db. Remove it.
Change-Id: I57a6c619c6e1f57be6963da2954329bc9c007dd8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10223
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
These are alternative customer options connected to J19 header.
We need to avoid modifying devicetree.cb, so we fix devicetree
for the super-io device-enables at runtime instead.
Change-Id: I04a79974b9bdf52b09ffc1b1362e201eab1ee011
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10178
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The non-module SMM programs were not being garbage collected
during linking. Do this so that one doesn't have to add dependencies
for unused functions in SMM.
TEST=Interrogated readelf -e smm.elf on both builds as well as diffed
the symbol table. Runtime testing was not done.
Change-Id: I31991496d92191e540df6340c587eec09c7022b3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10219
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fill out functions to get the offset and size for both
regions and region_devices. Additionally add a helper for
memory mapping an entire region_device.
Change-Id: I8896eaf5b29e4a67470f4adc6f5b541566cb93b5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10215
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
GICv2 provides a wake IRQ/FIQ (for wake-event purpose), which are not
disabled by GIC CPU interface. This is done by adding a bypass override
capability when the interrupts are disabled at the CPU interface. To
support this, there are four bits about IRQ/FIQ BypassDisable in CPU
interface Control Register. So the CPU can exit from WFI when an
asserted IRQ is coming. This is critical for power gating a CPU.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=testing with CPU idle with power down state support and CPU can
wake up normally
Change-Id: I71ac642e28024a562db898665b74a5791fce325a
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 3a3f098cbf3fbfdab8150ebd4fd688fdb472b529
Original-Change-Id: I20569a18f34a4b11b8c8c67ea255b3d0f021839f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269116
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10172
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Implement the cpu_suspend for the PSCI service in secmon.
BRANCH=none
BUG=chrome-os-partner:39620
TEST=test with CPU idle driver that invoke the cpu_suspend of PSCI
Change-Id: I4cdfab88bf36bf432fb33c56c1ea114b384528f8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 90b3ea3fcb21cb393e30a8359f0328054961f6d5
Original-Change-Id: Ieb76abc017b9c3e074cc018903cef72020306a8f
Original-Signed-off-by: Joseph Lo <josephl@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/269115
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10171
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Just a copypaste, never worked.
Change-Id: I84b46a5a0ada2e472894c63a17170e0979ad9160
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10218
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ib4ee3633d210a05e06ed95fc13830cc692095501
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: http://review.coreboot.org/10235
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This patch is based on commit f2b3cd63
(lenovo/x60: Support digitizer on X60t and X201t)
Tested on Thinkpad X200 Tablet (7450): all pen functionallity
works (i.e. movements, presure sensitivity and buttons)
Change-Id: I9bd18642a6ea4211dc3be065456a507fc0b72561
Signed-off-by: Alex David <opdecirkel@gmail.com>
Reviewed-on: http://review.coreboot.org/10208
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
The check is wrong. On Acer Aspire One it returns 0 despite 2 DIMMs working
fine on the same channel if this check is disabled (tested by memtest).
On boards that have only 1 DIMM per channel, the code will simply find no
SPD and skip empty slot.
Change-Id: I5f2fdcd1d948ebf3eabebaea4441af4c19e47f8f
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7568
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
|
|
We already have APM_CNT_FINALIZE defined to the same value. Just use it
thoughout.
Change-Id: Ife94ec7a34da27d3a720bda7337c02e41f18ac72
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10226
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
The struct rockchip_spi_media type is no longer used;
nor is initialize_rockchip_spi_cbfs_media(). Remove them.
Change-Id: I2c24be249e0cd89e2dd328e05cdd24a178fe37e8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10214
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
These boards are not ThinkPads. Furthermore, autogenerated build.h
might not be generated yet to be included.
Change-Id: I084f632d45477abf5e3cb1b734e8048f554423ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10213
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
|
|
Inclusion of ricoh driver was lost in 1d7b9de3504e90f0886fccec3a1f8a783fd4cc58.
So the relevant code wasn't even compiled.
Fix copy-paste mistakes without significance while on it as well.
Change-Id: Ie548cb43f986f147658fc9c67963f8a055250598
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10211
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ia5e26110928fa011305c13362f20fbe78ca9cf30
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7134
Tested-by: build bot (Jenkins)
Reviewed-by: Nicolas Reinecke <nr@das-labor.org>
|
|
The spi_flash API did not have any of its callbacks
documented. Do that so that people don't have to go
into the guts of an implementation to figure out the
proper expectations.
Change-Id: I55a0515445cab3697813d88373ee413f30b557b5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10206
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib42f4a9eeb48dfb1a04e332aeb8f83dc4c4eef91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10188
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace the multiple indexed I/O read and write
functions with common functions.
Change-Id: Idfe7a8784c28d51b3fbcb2f4e26beaa0b91741a8
Signed-off-by: Dave Frodin <dave.frodin@se-eng.com>
Reviewed-on: http://review.coreboot.org/10145
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
Currently only RO-lock is supported. Make full lock available as an option.
Change-Id: Ib68a1e82733a51053a9adc80ac501b6205c6b8a7
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10191
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
In order to facilitate platforms which need a buffer cache
for performing boot device operations provide infrastructure
to share the logic in managing the buffer and operations.
Change-Id: I45dd9f213029706ff92a3e5a2c9edd5e8b541e27
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9132
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Provide common code for using memory-backed region devices.
This allows in-memory buffers to act as a region device.
Change-Id: I266cd07bbfa16a427c2b31c512e7c87b77f47718
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9131
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The memory pool infrastructure provides an allocator with
very simple free()ing semantics: only the most recent allocation
can be freed from the pool. However, it can be reset and when
not used any longer providing the entire region for future
allocations.
Change-Id: I5ae9ab35bb769d78bbc2866c5ae3b5ce2cdce5fa
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9129
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The region infrastructure provides a means of abstracting
access to different types of storage such as SPI flash, MMC,
or just plain memory. The regions are represented by
region devices which can be chained together forming subregions
of the larger region. This allows the call sites to be agnostic
about the implementations behind the regions. Additionally, this
prepares for a cleaner API for CBFS accesses.
Change-Id: I803f97567ef0505691a69975c282fde1215ea6da
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9128
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Routing is decided based on enabled logical/virtual devices.
For a valid devicetree, one should have only one of SP3 and GPIO0,
and only one of SP4 and GPIO1, enabled at a time in configuration.
Change-Id: I02017786aba9dd22d12403aaa71d7641f5bbf997
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10177
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
That function was getting too long.
Change-Id: Ic50f210391c2467b65215aa556269b0ba601c2ec
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10176
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
Without this some radios may remain operational. They may consume power but
the immediate demonstrable effect is wireless LED still being on.
Coreboot will reenable radios on resume or poweron.
Change-Id: I9fcb08880964b1594f779a246840bc3013a44afe
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10190
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
x230 is ivy, not sandy. Fix copy-paste error.
Change-Id: Ic462bab39ddac0e1e6fef1e043970957e45fb6ed
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10189
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
When we are taking the recovery path there is no slot or
components to fill out.
Change-Id: Ic97a247629365ef54a340c4398cb7491935edc11
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10198
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The AGESA.c file in 3rdparty has cbfs access functions
for locating the AGESA binaries. coreboot access functions
need to be within coreboot where they can be updated with
cbfs changes. Move the offending function to coreboot.
Change-Id: Ibf6136d04dfbdb0198e90cc3ce719dc286c5610e
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/10058
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add necessary checks and objects for secmon serial console.
Change-Id: Ibafa19061255ef6847a424922565a866328ff34c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10197
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
verstage previously lacked serial console support.
Add the necessary objects and macro checks to allow
verstage to include the serial console.
Change-Id: Ibe911ad347cac0b089f5bc0d4263956f44f3d116
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10196
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
There was no indication of verstage being loaded. Provide this
output so that one can follow the flow from console messages.
Change-Id: I67ae6bb334608fe10a4a12fe690498afaf6b8366
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10195
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are more stages than currently handled in the
initial message from console_init(). Add support for those
including an UNKNOWN catchall.
Change-Id: I2374db590072bdca8ff35116e2ecb2ad6459b697
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10194
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
In ee89435798022021026f511deddf0e3b401ad031 microcode for 306ax
was forgotten in migration.
Without microcode update my machine experiences random hangs and various
misbehaviour.
Change-Id: I61c704d88a8a0ed74a16fb3f80cce08e8515e6e2
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/10180
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Add support to allocate a region just below CBMEM root. This region is
reserved for FSP 1.1 to use for its stack and variables.
BRANCH=none
BUG=None
TEST=Build and run on Braswell
Change-Id: I1d4b36ab366e6f8e036335c56c1756f2dfaab3f5
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10148
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The implementation of timer_monotonic_get() for the tsc
module was being guarded from SMM. Allow this to be
linked into SMM as the generic spi flash driver now needs
this support which can be included in SMM.
Change-Id: I3909edecac8de117922c4ea6c53e6e561f6f435b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10187
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
I messed up the conditionals on loading the reference code.
The bug used || instead of && causing 2 reference codes to
be loaded.
Change-Id: I29a046bf0e8dc29a9efdb636ebfd04e11eb73f82
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10185
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
The support for RELOCATABLE_RAMSTAGE was accidentally omitted in
the vboot loader. Add said support.
Change-Id: I569918823253c33f698acefd6a619133543c7aef
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10184
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Add FSP 1.0 source for comparison with FSP 1.1.
BRANCH=none
BUG=None
TEST=None
Change-Id: I8df349f97acfa74f4de3607d49633da3d4884546
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10116
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Tested with gizmosphere/gizmo1 Explorer add-on board, which
exposes the following device:
0x0403 Future Technology Devices International, Ltd
0x6014 FT232H Single HS USB-UART/FIFO IC
For now UART is hard-coded to 115200, 8n1, no flow-control.
Change-Id: I4081f84f7700751ccbf079e7fcbb1467aa71d872
Signed-off-by: Nico Huber <nico.h@gmx.de>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10063
Tested-by: build bot (Jenkins)
|
|
The vboot library currently relies on link-time known
address and sizes of the work buffer. Not all platforms
can provide such semantics. Therefore, add an option
to use cbmem for the work buffer. This implies such platforms
can only do verification of the firmware after main memory
has been initialized.
Change-Id: If0b0f6b2a187b5c1fb56af08b6cb384a935be096
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10157
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of using the symbols directly provide a size
function to provide symmetry between getting the work
data and size. It also allows for an abstraction where
the linker symbols may not be the only source of this
information.
Change-Id: I4568064a0050d118c3544ab1ea59a08eb0bad8e4
Signed-off-by: Aaron Durbi <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10156
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
vboot_verify_firmware() was only defined to ease upstreaming.
It was only an empty inline as it is so remove it. Additionally,
vboot2 does not require romstage_handoff so there's no need in
adding it for the nyan boards.
Change-Id: I4d84ac9fb60c756cf10742f26503f7f11af5f57b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10155
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
As previously done the vboot loader can be optionally
inserted in the stage loading logic in order to
decide the source of each stage. This current patch
allows for verstage to be loaded and interrogated
for the source of all subsequent stages. Additionally,
it's also possible to build this logic directly into
one of the additional stages.
Note that this patch does not allow x86 to work.
Change-Id: Iece018f01b220720c2803dc73c60b2c080d637d0
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10154
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
If the limit of the large starting region was set with
a NULL pointer then the limit field will be 0. If the
limit is zero then no attempt to recover is necessary
as there is no region to recover.
This prevented an early call cbmem_find() from hanging a
rambi device. The config was with vboot enabled and was
way before memory init in the sequence.
Change-Id: I7163d93c31ecef2c108a6dde0206dc0b6f158b5c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10175
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This make it pass through -fno-stack-protector, and also uses
libverstage fields consistently.
verstage is for 'stage' stuff, libverstage for all the vboot logic.
Change-Id: I3032e072414bed52effd2dc5057896781ad562c6
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: http://review.coreboot.org/10174
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
In order to allow easier setting of variables without
changing mainboards and/or chipset Kconfig files allow
the vboot options to be selected by the user.
Change-Id: I6e995eb209b4cd63c73ef679d0c5699759d129f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10153
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The VB_FIRMWARE_ARCH variable was not being set correctly,
and the VBOOT_STARTS_IN_BOOTBLOCK Kconfig option was not properly
prefixed with CONFIG_. Correct both of these oversights.
Change-Id: Id27974c285d2629bd47b90b6a93aca1ec8a76512
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10152
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Somewhere along the development path the following
vboot functions were dropped:
int vboot_enable_developer(void)
int vboot_enable_recovery(void)
Add them back, but also refactor the flag extraction
so as not duplicate all that same logic.
Change-Id: Id58f3b99f29caeff98b2d3111cfa28241d15b54f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10151
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly.
Change-Id: Ib8427fe015b72e2282219f116a39949739a0af48
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10150
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The linker scripts are added to stage objs so remove those
from the object lists. boot.c will be needed to link verstage
properly. Lastly, VERSTAGE_LIB has no value so remove it.
Change-Id: Ie53b42c4995a96006463ec5b358aa43a731cb1b8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10149
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
arch_program_segment_loaded ensures that the program segment loaded is
synced back from the cache to PoC. dcache_flush_all on arm64 does not
guarantee PoC in case of MP systems. Thus, it is important to track
and sync back all the required segments using
arch_program_segment_loaded. Use this function in rmodules as well
instead of cache_sync_instructions which guarantees sync upto PoC.
BUG=chrome-os-partner:37546
BRANCH=None
TEST=Boots into depthcharge on foster
Change-Id: I64c2dd5e40ea59fa31f300174ca0d0aebcf8041d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 35ba0b882b86ff2c29ac766e1d65f403c8346247
Original-Change-Id: I964aa09f0cafdaab170606cd4b8f2e027698aee7
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/260908
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Original-Trybot-Ready: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/10173
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
secmon is referring to uart's default_baudrate() and
various coreboot version strings.
Change-Id: I40a8d1979146058409a814d94ea24de83ee4d634
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10129
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
So that's more precise than "anything non-pre-ram".
Change-Id: I21db536a5ea704c4b087f57d0b761dd3fdf43e3e
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10128
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
These tables are not referenced anywhere, thus all
comments about adjustments are void.
Also drop stub AgesaReadSpd that is all commented out.
Change-Id: I12233ea0dc4baaf36a75f359c52cc59c9b6dad79
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/10143
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
Reviewed-by: Dave Frodin <dave.frodin@se-eng.com>
|
|
The ACPI power state generator for AMD 10xxx CPUs did not generate
the _PSD object required for reliable PowerNow! operation. Without
a correct _PSD object PowerNow! does not know the required core
clock relationships, potentially causing unstable system operation.
Generate the _PSD object in accordance with the BKDG Rev. 3.62.
Change-Id: I255a4837ab29ff1b0874daf189ffb61798645795
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/10142
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
|
|
1.) Removed invalid set of TRANS_STATE_MASK bit
2.) Used i915 register defines to clarify code
Change-Id: I08d016e9d66b5eeea8f2174abaa35a98e2b4eca3
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9329
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
A few hardcoded values could be fixed after this commit
Change-Id: I3ae67f4f6136361d67d4fdae2a5a29b7b1a75478
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: http://review.coreboot.org/10065
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
This allows the backlight control register to be set via devicetree.cb
Change-Id: I32b42dfc1cc609fb6f8995c6158c85be67633770
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9330
Tested-by: build bot (Jenkins)
|
|
This adds a compiler for a language whose textual representation of flashmap
regions will be used to describe the layout of flash chips that contain more
than just a single CBFS. Direct integration with cbfstool (via a new
command-line switch for the create action) is forthcoming but will be added
separately.
BUG=chromium:461875
TEST=Use Chromium OS's cros_bundle_firmware script on the fmap.dts file for
panther. Using the latter file as a reference, write a corresponding
fmap.fmd file and feed it through fmaptool. Run both binary output files
though the flashmap project's own flashmap_decode utility. Observe only
the expected differences.
BRANCH=None
Change-Id: I06b32d138dbef0a4e5ed43c81bd31c796fd5d669
Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Commit-Id: 005ab67eb594e21489cf31036aedaea87e0c7142
Original-Change-Id: Ia08f28688efdbbfc70c255916b8eb7eb0eb07fb2
Original-Signed-off-by: Sol Boucher <solb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/255031
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-on: http://review.coreboot.org/9942
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
In linking ramstage a single object file is created before linking
with the linker script. Though there is a weak timestamp_get() symbol
in timestamp.c any of its dependent symbols need to be available
during the incremental link. As not all platforms have
HAVE_MONOTONIC_TIMER enabled this will create a linking error.
Fix this by providing a hint to the compiler to remove dead code
and thus the dependent symbols causing linking errors in the presence
of !HAVE_MONOTONIC_TIMER.
Change-Id: Ib8a5dca2c12c2edac7605f403ed91b793823c8a3
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/10138
Tested-by: build bot (Jenkins)
Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: Id1685c0b28ec8e3ab972a671af6f2de6f321c645
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9805
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I9cbdf06f4d0956b5374915f8af7501c6f75b4687
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10113
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
To avoid having to dig up the constraints again, document
the memory layout right in memlayout.ld.
Change-Id: I298cc880ae462f5b197ab2f64beb2f0e0d9f5a7d
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10039
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This allows providing a verified boot mechanism in the
default distribution, as well as reusing vboot code like
its crypto primitives for reasonably secure checksums over
CBFS files.
Change-Id: I729b249776b2bf7aa4b2f69bb18ec655b9b08d90
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10107
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There's now room for other repositories under 3rdparty.
Change-Id: I51b02d8bf46b5b9f3f8a59341090346dca7fa355
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10109
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
To move 3rdparty to 3rdparty/blobs (ie. below itself
from git's broken perspective), we need to work around
it - since some git implementations don't like the direct
approach.
Change-Id: I1fc84bbb37e7c8c91ab14703d609a739b5ca073c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10108
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Adopted style from later Chromebooks.
Change-Id: I4993b8f40489b6bf5d08e00089f36f293853629e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/9992
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I708041133dfafdc97e052952ad9d8f2e4164209c
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10105
Tested-by: build bot (Jenkins)
|
|
Change-Id: I2e7f17a686f6af3426c9d68cd9394e9a88dbf358
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10104
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
And we don't support lzma compressed data in verstage.
Change-Id: I3d8d3290f147871c49e9440e9b54bbf2742aaa9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10103
Tested-by: build bot (Jenkins)
|
|
The timestamp code's restriction to run only on the BSP
is for AMD systems. No need to run it everywhere, so
tighten the test (and only run boot_cpu() when required).
Change-Id: I800e817cc89e8688a671672961cab15c7f788ba8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10102
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
That function will be used by the vboot loader.
Change-Id: I204c6cd5eede3645750b50fe3ed30d77c22dbf43
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10101
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
verstage still needs to be built with its flags.
Change-Id: I125e4be283d3838fc7ce6587bf9996731540d517
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10098
Tested-by: build bot (Jenkins)
|
|
bootblock et al were listed twice, which shouldn't happen.
Change-Id: I3e6077d70e064ebe74bd4e5e3156f87d548c2fcb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10097
Tested-by: build bot (Jenkins)
|
|
The name is more consistent with what we have elsewhere,
and the callsite didn't build at all (with vboot enabled)
Change-Id: I3576f3b8f737d360f68b67b6ce1683199948776d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10096
Tested-by: build bot (Jenkins)
|
|
It's not used at all.
Change-Id: I97bf02a9277f6ca348443c6886f77b4dfc70da78
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10095
Tested-by: build bot (Jenkins)
|
|
The vboot mechanism will be implemented within the program loader
subsystem to make it transparent to mainboards and chipsets.
Change-Id: Icd0bdcba06cdc30591f9b25068b3fa3a112e58fb
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Reviewed-on: http://review.coreboot.org/10094
Tested-by: build bot (Jenkins)
|
|
On current Danger boards, VCC_LCD is gated by BL_EN. Thus we
need to enable BL_EN in order to power on the display so that
we can read the EDID and set things up.
Later board revisions may change this ordering, but for now it
doesn't seem to be causing a significant issues (no noticable
"snow" or other corruption using Pepto display).
BUG=none
BRANCH=none
TEST=booted on Danger, saw dev mode screen come up
Change-Id: I70aab8c1f6da2d0fce310d59073026eef0f67821
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1a918824e747600a2f3a88602320f4f563ce17b7
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Iaf17cc4682bd3c46f62cba789e3ecf8d5a474362
Original-Reviewed-on: https://chromium-review.googlesource.com/266913
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/10089
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
This patch initializes the GPIO for the Chrome EC interrupt line on
Veyron boards and passes its description through the coreboot table, so
that payloads with keyboard support can use it to detect pending key
presses.
BRANCH=none
BUG=chrome-os-partner:39514
TEST=Booted Jerry, confirmed that it could still detect keypresses.
Confirmed that EC log does not show a huge amount of MKBP polls.
Change-Id: I4de35ef411c3acc02282ebf8e764785a1e7bf6f1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 8ad95d667ef3af3fb217e3c370468dc1d6ec36c9
Original-Change-Id: I8b426621af088460929cfff0a4b46618e2a86725
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/267344
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Randall Spangler <rspangler@chromium.org>
Reviewed-on: http://review.coreboot.org/10088
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
When CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM is set, this
function is now linked into the ramstage as well as the romstage,
since the former makes calls to it in panther builds.
With this commit, it's possible to build panther using the config file
from the Chromium OS project[1] if you supply the appropriate Intel
descriptor and ME binary blobs and manually set
CONFIG_VBOOT_VERIFY_FIRMWARE=n, CONFIG_BUILD_WITH_FAKE_IFD=n, and
CONFIG_HAVE_ME_BIN=y. The resulting image is at least able to load a
payload, although I only tested with depthcharge, which immediately
complained, "vboot handoff pointer is NULL" and gave up the ghost.
[1] https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/master/sys-boot/coreboot/files/configs/config.panther
Change-Id: Id3bb510fa60129a4d36a0117dc33e7aa62d6c742
Signed-off-by: Sol Boucher <solb@chromium.org>
Reviewed-on: http://review.coreboot.org/10046
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Do this to avoid reporting incorrect resource window in the logs.
Change-Id: Icb7978deeb54f0ec6c29473ce9034fe44b6d7602
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8890
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Remove some redundancy in both source code and console output.
Change-Id: I32350966de7af30b3ca4ac747fe3bf623ea9484b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8889
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Once a bridge window resource is allocated, it becomes the base and limit
for any resource on the secondary bus. Upper limit was incorrectly
reported in the log while assigning secondary resources.
Change-Id: I69f0a02aae6d13f77aaa2dace924b8970b23edad
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8888
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I19af5f36a55d6c2906d603e940b3aadd2ca97140
Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-on: http://review.coreboot.org/8317
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The 'A' indicates the production process(64 nm). All other chips from
the same family leave this out.
TEST=Build and booted on Minnowboard Max
Change-Id: I21e6c01de5d547bbc2252e679a001948e7ab752c
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10078
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
'.op_erase' was not specified for this chip. Set it to sub sector
erase(CMD_M25PXX_SSE). Adjust page/sector size for sub sector erase
to work.
TEST=Untested, due to lack of hardware.
Change-Id: Icc2748fbd3afeb56693e1c17d97eb490fba67064
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10077
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
N25Q064 is similar to N25Q128.
TEST=Build and booted twice on Minnowboard Max
Change-Id: Iec105f8b81f619846cf40b40042cc59150b81149
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10076
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Fix compiler error's due to type mismatch. This is broken since commit
bde6d309 (x86: Change MMIO addr in readN(addr)/writeN(addr, val) to
pointer).
TEST=Build with CONFIG_DEBUG_SPI_FLASH=y and booted on Minnowboard Max
Change-Id: Id3d448e219716135897f381a73d416ff34036118
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10075
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
What is described by the comment has already been fixed in f0d038f4
(flash: use two bytes of device ID to identify stmicro chips).
This also means that STM_ID_N25Q128 doesn't have to be at the top of
stmicro_spi_flash_table anymore.
TEST=Untested, due to lack of hardware
Change-Id: I7a9e9a0cdfdb1cf34e914e186fc6957c1d9b5ca6
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10068
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The log message says 'page size' while actually the sector size is
printed. This is confusing since for stmicro page size != sector size.
Also add '0x' prefix to numbers to make it clear they are in hex.
TEST=Build and booted on Minnowboard Max
Change-Id: I795a4b7c1bc8de2538a87fd4ba56f5a78d9ca2ac
Signed-off-by: David Imhoff <dimhoff_devel@xs4all.nl>
Reviewed-on: http://review.coreboot.org/10067
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
None of the sockets has actual configuration options, so the source
for them is only cosmetical boilerplate. Hence, drop it. This reduces
the sockets to be selectors for certain CPU types, which will be dropped
in future commits, and mainboards will select their CPUs directly rather
than through an additional layer of indirection (sockets)
Change-Id: I0f52a65838875a73531ef8c92a171bb1a35be96e
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/9797
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <edward.ocallaghan@koparo.com>
|
|
Change-Id: I226a1a6bc6b1f921c03f8ec57875a88314928aeb
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/9318
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
