| Age | Commit message (Collapse) | Author |
|---|
|
1. Add FSP GOP config.
2. Pass VBT to FSP.
Change-Id: Icf836d683ae00cd034c853bc9ce965d4de5f7413
Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com>
Signed-off-by: Abhay Kumar <abhay.kumar@intel.com>
Reviewed-on: https://review.coreboot.org/21628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Use a single define and set the CROS GPIO ASL device to match the
Stoney Ridge GPIO HID. Update the GPIO number to 142. Also, add a DDN
field in the GPIO ASL. This addresses the TEST indicated below.
BUG=b:65597554
BRANCH=none
TEST=grep ^ /sys/devices/platform/chromeos_acpi/GPIO.*/* reports AMD0030.
Change-Id: I1d6c42c6c9a0eef25e0e99aed6d838c767f5e01f
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21614
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Refactor the GPIO functions to use GPIO numbers. This is more consistent
with other GPIO code in coreboot.
BUG=b:66462235
BRANCH=none
TEST=Build and boot Kahlee
Change-Id: I6d6af7f6a0ed9ba1230342e1ca024535c4f34d47
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It shares the same northbridge, cpu, romstage with asus/p2b-ls, which is
already on EARLY_CBMEM_INIT as of commit e14d7de.
Change-Id: I8e7c468f0363a5cb9885020bc116e5ae3480ec17
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21647
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Boot tested on p2b-ds. Migrate p2b-d as well because they share
the same mainboard romstage.
Change-Id: I3e4b98cc6191d557325fc5da97744902996673af
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21646
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
BUG=b:65028930
BRANCH=none
TEST=emerge-fizz coreboot. Verify Depthcharge recognize VBSD_EC_EFS.
Change-Id: Ie18536982e172a45703600eec6e183c1e7c12746
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Reviewed-on: https://review.coreboot.org/21640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is required to transmit button information from EC to kernel.
BUG=b:65980005
BRANCH=None
TEST=Verified using evtest that kernel is able to get button
press/release information from EC.
Change-Id: I3cd524aec47ca988d6044cb089e7aa7636e64ab2
Signed-off-by: Kevin Cheng <kevin.cheng@intel.com>
Reviewed-on: https://review.coreboot.org/21633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: I4d6c6810b91294a7e401a4a1a446218c04c98e55
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21590
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Change-Id: Ia888907028d687e3d17e5a088657086a3c839ad3
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
src/lib/loaders was removed in commit 899d13d0df ("cbfs: new API and
better program loading").
Change-Id: Ic7a9f5d83c5f9445bf24970e0c8cc645dd1944ff
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
I triggered a bug, when I try to debug riscv code by spike.
This bug is caused by an instruction exception[csrwi 0x320,7].
This is operate for mcounteren. This address is error. 0x306
is right. scounteren is not need to be set, because S-mode
code controls it.
Change-Id: If0bea4bf52d8ad2fb2598724d6feb59dc1b3084a
Signed-off-by: wxjstz<wxjstz@126.com>
Reviewed-on: https://review.coreboot.org/20043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Change-Id: I2c955e9978d56bd1a174ae48e1b69adee43986c9
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
"WinNET WinNET G170" doesn't look too cool :(
Change-Id: Iae0a8725645b9d6321b64ccbad10633e0049d477
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/21612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Otherwise the USB init gets unhappy:
|3df52000| EHCI init on dev 00:10.4 (regs=0xfd010010)
|3df3d000| WARNING - Timeout at ehci_wait_td:515!
|3df3d000| ehci pipe=0x3df52880 cur=00000000 tok=00000000 next=3df3ddc0 td=0x3df3ddc0 status=80e80
|3df3e000| WARNING - Timeout at ehci_wait_td:515!
|3df3e000| ehci pipe=0x3df52a80 cur=3df3ee00 tok=00000d00 next=3df3edc0 td=0x3df3edc0 status=80e80
|3df3e000| WARNING - Timeout at ehci_wait_td:515!
|3df3e000| ehci pipe=0x000ee680 cur=00000000 tok=00000000 next=3df3ecc0 td=0x3df3ecc0 status=1f0c80
Change-Id: I69f1fe38503b0f8d6015b515637d8376726490c0
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/18905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
It makes no sense for Das U-Boot which uses the same setting.
Change-Id: I1629aecf33cb62bb1e6856ef5627748a7dc74d8a
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-on: https://review.coreboot.org/21611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Use reserved_ram_resource to help ensure the UMA memory is typed
as WB.
BUG=b:65856868
TEST=Inspect MTRRs and compare with UMA memory
Change-Id: Ifa54d9b1c206d2ee6dc4b8f90b445a6820ceb8fd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21606
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EXT_CONF_SUPPORT symbol doesn't exist for the Stoney Ridge SoC.
Clean up northbridge.c by removing the check for the config value set.
Remove the CPU initialization code that clears the EnableCf8ExtCfg
bit. The location where it was set was removed in
c1d72942 Disable PCI_CFG_EXT_IO
BUG=b:66202622
Change-Id: Ic58c47fc5f568d17f5027c96d4152b0e5b3e1d14
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21497
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Delete the obselete Kconfig symbols regarding the memory hole. Integrate
the hole check into domain_set_resources(). The hardware configuration
is done by AGESA, so only discover the setting and adjust the mmio_basek
accordingly.
BUG=b:66202887
TEST=Check settings with HDT
Change-Id: Id15a88897e29bff28ab7c498dc4d3818834f08b2
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/21496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A regression is hidden in commit 7eb0157fca33865783c1cc3c8e5cb2e327e551d7
(device/dram/ddr2.c: Decoding byte[12] bit7 as self refresh flag ), which
breaks the build procedure when CONFIG_DEBUG_RAM_SETUP is set.
Maybe it had better implement "printram" and the like as inline
functions instead of macros.
Change-Id: If956435bd0c39b1f3e722c2cfc48d2d0f35abc9b
Signed-off-by: Bill XIE <persmule@gmail.com>
Reviewed-on: https://review.coreboot.org/21673
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Instead of duplicating code across multiple mainboards, use newly
added helper function to read boardid from Chrome EC.
Change-Id: I1671c0a0b87d0c4c45da5340e8f17a4a798317ca
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Instead of duplicating the code across multiple mainboards, provide a
helper function to read boardid from Chrome EC.
Change-Id: I2008de7032bc880e90b2c3c385b2a67bfb8724cc
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
New AGESA support files will be used for binaryPI
platforms as well. Furthermore, some of those should
move from split nb/ sb/ directories to soc/, so move
support files for the API under drivers/.
Change-Id: I549788091de91f61de8b9adc223d52ffb5732235
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Except for family15, all AGESA boards have moved
away from AGESA_LEGACY_WRAPPER, thus they all
have POSTCAR_STAGE now.
AGESA family15 boards remain at AGESA_LEGACY=y, but
those boards have per-board romstage.c files and
are not touched here.
Change-Id: If750766cc7a9ecca4641a8f14e1ab15e9abb7ff5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Move all boards that have moved away from AGESA_LEGACY_WRAPPER
or BINARYPI_LEGACY_WRAPPER to use POSTCAR_STAGE.
We use POSTCAR_STAGE as a conditional in CAR teardown to tell
our MTRR setup is prepared such that invalidation without
writeback is a valid operation.
Change-Id: I3f4e2170054bdb84c72d2f7c956f8d51a6d7f0ca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I1d4b86c0e74cf4e1a7862889638125e5adcd4c3d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ide14bd164fe4a1846f86c6be326e2cd4f540bf97
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I3f6030879da61168adf42db0a4913d70a737594e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I077677c10508a89a79bcb580249c1310e319aaf1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This file mostly mimics Porting.h and should be removed.
For now, move it and use it consistently with incorrect form
as #include "cbtypes.h".
Change-Id: Ifaee2694f9f33a4da6e780b03d41bdfab9e2813e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Fix regression of IDS debugging after commit
1210026 AGESA buildsystem: Reduce include path exposure
Mainboard directory was removed from libagesa includes
path here, and this resulted with fam15tn and fam16kb using
a template OptionsIds.h file under vendorcode/ instead.
Add mainboard directory back to include path of libagesa
and remove those (empty) template files.
Change-Id: Iee4341a527b4c152269565cac85e52db44503ea6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21661
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
We can simply declare these structures const.
Change-Id: I637c60cc2f83e682bd5e415b674f6e27c705ac91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
It's already implemented like this with binaryPI API header.
That implementation is essentially the same with 'const' qualifier
just being ignored in the build process for PI blob.
For open-source AGESA build, work around -Werror=discarded-qualifier
using a simple but ugly cast.
Change-Id: Ib84eb9aa40f1f4442f7aeaa8c15f6f1cbc6ca295
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21630
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I150d4a71536137a725f43d900d483e7e35592bb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Copy-paste, was not really used at all.
Change-Id: I9a916f6fa0f6a48de6ac62be6f366cee0e406a8f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21648
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Since snappy PCB may have over 9 SKU and current GPIO board ID GP16/GP17
is insufficient to use.
Using VPD to control could prevent H/W change.
BUG=b:65339688
BRANCH=reef
TEST=emerge-snappy coreboot
Change-Id: I55ab741354797e022dd945da9c8499ee5e041316
Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
variant_board_sku() callback exists to allow some of the variants to
report the sku id differently based on board implementation. However,
there are cases where there are multiple ways to encode the sku id, but
the original way should be used as a fallback. As such expose a helper
function, sku_strapping_value(), such that there isn't code duplication
for the common fallback case.
BUG=b:65339688
Change-Id: I1e917733eb89aebc41a483e2001a02acfda31bf4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21645
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update I2C5 bus parameters to obtain clock frequency <400kHz.
BUG=b:65062416
TEST=Verified using an oscilloscope that I2C5 bus frequency
in factory is ~397kHz.
Change-Id: I3d0b0388343d4c6c5e7eabf3e06799d059307517
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/21669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I7a10a3fa5e1e9140a558f61109d0c9094d46e521
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21655
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The x220 and x230 do have BDC detection, but it's broken.
Disable BDC detection on those two boards, and add a comment
why it doesn't work.
The issue has been reported and tested on Lenovo X220.
Change-Id: Id1ccc2c4387370e284ff8964e1c41d945cefe74c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/21587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Dump PMH7 revision and ID for diagnostic purposes.
Tested on Lenovo T430: PMH7: ID 05 Revision 12
Change-Id: I60d15a8f740aeb974a79b27507e974a730cec174
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/20807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
|
|
SPD decoding problems are no longer a good method for detecting if i2c
byte read failed, since the return value of i2c_block_read is checked.
Change-Id: I230aa22964c452cf28a9370c927b82c57e39cc62
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Calling get_option() triggers printk's before consoles
are ready. Skip the call since console_loglevel is const
anyways for __PRE_RAM__.
Change-Id: I4d444bee1394449ce096c0aa30dca56365290e31
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I0383dd9b582d5c77be66ecd74bcf1a438f874cc7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Set SuperIO GPIO like vendor firmware.
Change-Id: I46a48776382eb0d9be9727691c68912991e14dfe
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21627
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
There have been discussions about removing this since it does not seem
to be used much and only creates troubles for boards without defaults,
not to mention that it was configurable on many boards that do not
even feature uart.
It is still possible to configure the baudrate through the Kconfig
option.
Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/19682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We can't use $(CC) in case it's set to Clang.
TEST=Built one target with Ada sources before and after this change and
verified that the same compiler commands are emitted.
Change-Id: I9b8ea35352d74b364f09fc12d8d981ca42f8b7c8
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
We don't output special ADAFLAGS in xcompile but its CFLAGS are
compatible with and necessary for Ada too. So use the latter and
make sure we use them for libgnat too.
Fixes i386 builds with x86_64 toolchain.
TEST=Gave libgfxinit a shot on lenovo/t420.
Change-Id: I0d13f182acfaa9bd1b608edd8a508c4ceedef3b3
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The original options were named and described under the false assumption
that the chipset lockdown would only be executed during S3 resume. Fix
that.
Change-Id: I435a3b63dd294aa766b1eccf1aa80a7c47e55c95
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/21327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
"Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3)" note
4 says bit7 of byte 12 indicates whether the assembly supports self
refresh.
This patch decodes this and modifies decoding tRR accordingly.
Change-Id: I091121a5d08159cea4befdedb5f3a92ce132c6e5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21620
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Offsets are a little different.
Change-Id: I39199f3279a8b76e290b6693adc50dc2ac0ccf23
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21113
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Needed for coreboot spi driver.
Change-Id: I01059c8cbdc6a002dfd75b6da3a629811b137702
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For all valid SPD values the same decoded tRR was returned.
Change-Id: Iec43f8c7460dfcf68f7c92dfdf333b004f368b65
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Found-by: Coverity Scan #1381369, #1381370, 1381371, 1381372, 1381373
Reviewed-on: https://review.coreboot.org/21642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch implements soc override function to calculate reserve memory
size (PRMRR, TraceHub, PTT etc). System memory should reserve those
memory ranges.
BRANCH=none
BUG=b:63974384
TEST=Ensures DRAM based resource allocation has taken care
of intel soc reserved ranges.
Change-Id: I19583f7d18ca11c3a58eb61c927e5c3c3b65d2ec
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21540
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch ensures to consider soc reserved memory size while
allocating DRAM based resources.
Change-Id: I587a9c1ea44f2dbf67099fef03d0ff92bc44f242
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21539
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch uses BIOS EBDA area to store relevent details
like cbmem top during romstage after MRC init is done.
Also provide provision to use the same EBDA data across
various stages without reexecuting memory map algorithm.
BRANCH=none
BUG=b:63974384
TEST=Ensures HW based memmap algorithm is executing once in romstage
and store required data into EBDA for other stage to avoid redundant
calculation and get cbmem_top start from EBDA area.
Change-Id: Ib1a674efa5ab3a4fc076fc93236edd911d28b398
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch provides EBDA library for soc usage.
Change-Id: I8355a1dd528b111f1391e6d28a9b174edddc9ca0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21538
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch split entire memory layout calculation into
two parts. 1. Generic memory layout 2. SoC specific
reserve memory layout.
usable memory start = TOLUD - Generic memory size -
- soc specific reserve memory size.
Change-Id: I510d286ce5e0d8509ec31a65e971d5f19450364f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21537
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch provides new APIs to write into EBDA area
and read from EBDA area based on user input structure.
Change-Id: I26d5c0ba82c842f0b734a8e0f03abf148737c5c4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This patch provides a kconfig option as EARLY_EBDA_INIT to
ensures user can make use of EBDA library even during early
boot stages like romstage, postcar.
Change-Id: I603800a531f56b6ebd460d5951c35a645fbfe492
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch ensures acpi APIs are available for postcar
stage.
Change-Id: Ia0f83cd4886ba7a16286dbbeb3257ede014ee3c7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/21626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
With reset default of the clockgen on this board the SATA clock which
needs to be 100MHz depends on FSB BSEL straps.
This explains why SATA was originally tested to be working but fails
with CPUs operating at different FSB.
This change sets a bit in the clockgen configuration which fixes the
SATA clock.
TESTED on with a 1333MHz FSB CPU.
Change-Id: Ic2b8ca91920f015ae3265871bc092023302fefdc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21257
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
TESTED, the screen doesn't jiggle (caused by wrong clock on reset
default clockgen configuration)
Change-Id: Icfa22daf90f9e2eff13b4fc5994664e96903dd1e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21222
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: If6cf47e4a87cf008d51f65fd1c1c79392c4b2786
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: https://review.coreboot.org/21619
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set sata enable FSP parameters.
Change-Id: Ie4723b37f0a2028d22f0a344e45a1ded51deecd0
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/21407
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the support for Kabylake Celeron base SKU
with PCH ID 0x9d50.
BRANCH=none
BUG=b:65709679
TEST=Ensure coreboot could recognize the Kabylake Celeron base
SKU and boot into OS.
Change-Id: I9c6f7bf643e0dbeb132fb677fcff461244101a55
Signed-off-by: Tsai, Gaggery <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/21617
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Wu <david_wu@quantatw.com>
Reviewed-by: T.H. Lin <T.H_Lin@quantatw.com>
|
|
Unlike Chromebooks, Purism laptops are only sold under one vendor name,
so MAINBOARD_VENDOR only needs to be set in src/mainboard/purism/Kconfig.
Change-Id: If0b33df01ff3327272d089b7efb8e64fa1233fdf
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21591
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Youness Alaoui <snifikino@gmail.com>
|
|
Change-Id: I4503f2c27774b68da7fa7294ddb6d00c81f167c7
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/21618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Change-Id: Ide4e58e584a1a2bbc1b861e2c4dd943a1aeb35ab
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/21600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ryan Salsamendi <rsalsamendi@hotmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add support for google/celes (Samsung Chromebook 3) as
a variant of the cyan Braswell baseboard.
- Add board-specific code as the new celes variant
- Add new trackpad I2C device to the baseboard for potential
reuse by other variants
Sourced from Chromium branch firmware-celes-7287.92.B,
commit 9f0760a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1""
Change-Id: Id52d3c523bae7745b3dc04da012ab65c1fb37887
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21572
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for google/banon (Acer Chromebook 15 CB3-531) as
a variant of the cyan Braswell baseboard.
- Add board-specific code as the new banon variant
Sourced from Chromium branch firmware-strago-7287.B,
commit 02dc8db: Banon: 2nd source DDR memory (Micro-MT52L256M32D1PF)
Change-Id: If29e95deee88b79522547e16fc80c2d5378da7c7
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Add support for google/terra (Asus Chromebook C202SA/C300SA) as
a variant of the cyan Braswell baseboard.
- Add board-specific code as the new terra variant
- Add code to the baseboard to handle terra's unique thermal management
- Add new shared SPD files to baseboard
Sourced from Chromium branch firmware-terra-7287.154.B,
commit 153f08a: Revert "Revert "soc/intel/braswell: Populate NVS SCC BAR1""
Change-Id: Ib2682eda15a989f2ec20c78317561f5b6a97483a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/21570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Gardenia (with Stoney Processor) has a single memory channel, not two.
This corrects DMI type 17 reporting and the memory clear functions.
Change-Id: If49b6a9f37b2687ea2f64105fb9e476a89aa87ed
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21602
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Once w83627hf_set_clksel_48() is unified into
winbond/common/early_init.c by /c/21331 (Unify w*_set_clksel_48()),
this file is no longer needed and can be dropped.
Build tested on select affected mainboards.
Change-Id: I6a5e27fdd48c6e002c3a39dc92fef77e85aea209
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
It is already using winbond_enable_serial(). Once
w83697hf_set_clksel_48() is unified into winbond/common/early_init.c,
this file is no longer needed and can be dropped.
Change-Id: I7424233b5d70e143721038493f194760f07346a1
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This function is identical throughout all Winbond superios in
the tree, so move it into superio/winbond/common/early_init.c,
renamed from early_serial.c because it now does more than just
early serial.
Change all affected mainboards to use the unified function.
Change-Id: If05e0db93375641917e538d83aacd1b50fbd033b
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/21331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
IRQ 9 is used for different purpose on this mainboard so move SCI away
to IRQ 10.
Change-Id: I7f055447f5d92bc4696b38e8103a7aebde95d9d3
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/21586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The System Control Interrupt is routed per default to IRQ 9. Some
mainboards use IRQ 9 for different purpose. Therefore it is necessary to
make the SCI configurable on Apollo Lake.
Change-Id: Ib4a7ce7d68a6f1f16f27d0902d83dc8774e785b1
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/21584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Enable LTR for Root port 0, where wifi card is connected.
BUG=b:65570878
TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported
by AER driver for root port 0.
Change-Id: I222a87fe2094c8424760ccf578e32b9ac042f014
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/21548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rajat Jain <rajatja@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There are a lot errors reported by AER driver for root port 0.
The erors are being caused by an unsupported request from the
device to the upstream port. Enabling LTR on the root port stops
these errors, it is because LTR is enabled on the device side but
not on the root port and hence root port was logging the LTR messages
from the device as unsupported.
The PCIe base spec (v3.1a) section 6.18 also states that:
LTR support is discovered and enabled through reporting and control
registers described in Chapter 7. Software must not enable LTR in an
Endpoint unless the Root Complex and all intermediate Switches indicate
support for LTR. Note that it is not required that all Endpoints support
LTR to permit enabling LTR in those Endpoints that do support it. When
enabling the LTR mechanism in a hierarchy, devices closest to the
Root Port must be enabled first.
If an LTR Message is received at a Downstream Port that does not
support LTR or if LTR is not enabled, the Message must be treated
as an Unsupported Request. FSP has a UPD for enabling/disabling
LTR on root port, use the same for configuring LTR on PCIe root ports.
BUG=b:65570878
TEST=After enbaling LTR on port 0 on the MB devicetree, No errors reported
by AER driver for root port 0.
Change-Id: Ica97faa78fcd991dad63ae54d2ada82194b4202a
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/21547
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
In coreboot commit bcd0bdabed (soc/intel/cannonlake: add rtc failure
checking), the function soc_get_rtc_failed was supposed to be moved,
but the old function was not removed, causing a build error.
BUG=b:63054105
Change-Id: I31c1966af413df3f5a5492a5dd891a6eb26a1fc4
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/21616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
There's an occasional issue on machines which use CMOS for their
vbnv storage. The machine that just powers up from complete G3
would have had their RTC rail not held up. The contents of vbnv
in CMOS could pass the crc8 though the values could be bad. In
order to fix this introduce two functions:
1. vbnv_init_cmos()
2. vbnv_cmos_failed()
At the start of vboot the CMOS is queried for failure. If there
is a failure indicated then the vbnv data is restored from flash
backup or reset to known values when there is no flash backup.
BUG=b:63054105
Change-Id: I8bd6f28f64a116b84a08ce4779cd4dc73c0f2f3d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
It's helpful to use the common vbnv_reset() function to
initialize the vbnv contents when backing store failures occur.
Therefore, allow that to happen.
BUG=b:63054105
Change-Id: I990639e8c163469733fdab0d3c72e064acc9f8d8
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to early_pch_common.c and
add a helper function to determine if failure occurred.
BUG=b:63054105
Change-Id: I710d99551cfb6455244f66b47fcbecc790ae770f
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21558
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: I368c31b9935c0fa9e8a1be416435dd76f44ec1ec
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: Ic4bf99dc3a26fbc3bd508e484963b9298ef1b24b
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: I1d90cc557225ddbba1787bf95eae0de623af487e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21555
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: I88bf9bdba8c1f3a11bc8301869e3da9f033ec381
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21554
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred. In addition actually
provide soc_get_rtc_failed() which properly indicates to the common
code that RTC failure did occur in the cmos_init() path.
BUG=b:63054105
Change-Id: I9dcb9377c758b226ee7bcc572caf11b7b2095425
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: Ia0a38f00d2a5c7270e24bdd35ecab7fbba1016d4
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In order to prepare for checking RTC failure in the early boot
paths move the rtc failure calculation to pmutil.c and add a helper
function to determine if failure occurred.
BUG=b:63054105
Change-Id: I1b02028a1830ff9b28b23da7a4a1fd343f329f0d
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21551
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add vbnv_init() which is responsible for doing any vbnv initialization
and reading the vbnv contents. Having this function allows for
putting vbnv backing store specific support in the main vboot logic
path.
BUG=b:63054105
Change-Id: Id8f0344e5de5338417ae2e353ae473d6909c860a
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21550
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Instead of having each potential caller deal with the differences
of cmos_init() and init_vbnv_cmos() when VBOOT is enabled put the
correct logic within the callee, cmos_init(), for handling the
vbnv in CMOS. The internal __cmos_init() routine returns when the
CMOS area was cleared.
BUG=b:63054105
Change-Id: Ia124bcd61d3ac03e899a4ecf3645fc4b7a558f03
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/21549
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Linux Pstore area must not be cleared on a reboot. Set the option
to not clear the memory in AGESA.
BUG=b:64193190
BRANCH=none
TEST=Memory clear isn't called in AGESA.
Change-Id: I9b8286ade718fa80bf3badd478ab9a7df643ab98
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21596
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kahlee has a single memory channel, not two. This corrects DMI type 17
reporting and the memory clear functions.
BUG=b:65403853, b:64193190
BRANCH=none
TEST=AGESA DMI reports the correct number of DIMMs.
Change-Id: Ic263d2677a480448beaf3850391b1a3d4ed38657
Signed-off-by: Marc Jones <marcj303@gmail.com>
Reviewed-on: https://review.coreboot.org/21595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
This patch outputs decoding errors with BIOS_WARNING instead of
depending on CONFIG_DEBUG_RAM_SETUP.
Returns SPD_STATUS_INVALID on invalid settings for tRR, bcd and tCK
and doesn't try to create a valid setting if an invalid setting is
detected.
Change-Id: Iee434d1fa1a9d911cc3683b88b260881ed6434ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/21480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This simplifies computing dram timings a lot.
This removes computation of rank size based on columns, rows,
banks,... and uses the information in SPD byte 31. The result of this
is that dimms with multiple asymmetric ranks are not supported
anymore. These however are very rare and most likely never tested on
this platform.
This also uses i2c block read instead of byte read to speed up the
raminit. The result is less time is being spend reading SPDs.
It still keeps smbus read byte as a backup if i2c block read were to
fail.
Change-Id: I97c93939d11807752797785dd88c70b43a236ee3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18305
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add PMC pci driver on top of PMC common code, also include pmc init code
reference from skylake.
Change-Id: I95895a3e26cdebd98a4e54720bd4730542707d7e
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/21251
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I270d17a2eff2c6664bf936425a6ed344be3feabe
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/21524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Change-Id: Id0b2b9e9ae2755ed89cee337a1a085fc4e95b073
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/21531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Iea99baaa58d2212e7d09a19aaac9d303226f7c5e
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/21530
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
