| Age | Commit message (Collapse) | Author |
|---|
|
Enable GPIO functionality in verstage so platforms can read a
PCH GPIO in verstage to determine recovery mode.
Change-Id: Icd4344c4d66dbe21fda9dc27e61a836c1dd9be07
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29407
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since the `PCI_DEVICE_ID_HSW_*` constants are no longer used, remove
them.
Change-Id: I84f1f069faa6a4165cf289f2e6c40889a49cad1d
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Enable the radium touchscreen support
BUG=b:117960394
BRANCH=master
TEST=
1. emerge-nami coreboot chromeos-bootimage
2. boot up on ekko DUT to check touchscreen device by evtest
/dev/input/event3: Raydium Touchscreen
Change-Id: I16167d5d3ce6eac9d64832b52bb1945999a63a90
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29365
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I5f2d9548b8e2c7b1d154b7bad126ec7b1052231a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Modify flash layout to match ICL-IFWI layout for early SoC PO support
Flash Reg 0: Descriptor [0x0 - 0xFFF]
Flash Reg 1: BIOS [0x400000 - 0xFFFFFF]
Flash Reg 2: IFWI (consist of ME primary & secondary partition and PMC FW)
[0x81000 - 0x3FFFFF]
Flash Reg 8: EC (applicable for Intel RVP with internal EC support)
[0x1000 - 0x80FFF]
Change-Id: I462a384739b5972d9a59569ffdcadba7cdef6a81
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29316
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The function `acpi_fill_madt()` is identical among all the Lynx Point
boards and sb/intel/bd82x6x, so share a common function between them.
Earlier Intel platforms have similar implementations of this function.
The common implementation might only need minor alterations to support
them.
Tested on an ASRock H81M-HDS and Google Peppy (variant of Slippy). No
issues arose from this patch.
Change-Id: Ife9e3917febf43d8a92cac66b502e2dee8527556
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
If the file `southbridge/intel/lynxpoint/nvs.h` is included in a file
that does not already include <stdint.h>, compilation errors result.
Adding the necessary <stdint.h> inclusions fixes compilation for an
ASRock H81M-HDS.
Change-Id: Id0d14705282cc959146e00dd47754ee8a2e8e825
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29389
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The platform.asl file is copied from sb/intel/bd82x6x, and also matches
the contents deleted from each mainboard's platform.asl.
Tested on an ASRock H81M-HDS and a Google Peppy board (variant of
Slippy). No issues arose from this patch.
Change-Id: I539e401ce9af83070f69147526ca3b1c122f042c
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On an ASRock H81M-HDS neither libgfxinit, nor Linux, is able to
initialise the display when lanes are not configured to be shared
between DDI A and DDI E.
Intel's reference manual [1] states that the decision to share lanes
between DDI A and DDI E is "based on board configuration". Hence, add a
new field to the devicetree that boards can set. All existing Haswell
boards have this unset, thus taking a value of 0, so there is no change
to existing behaviour.
[1]: Intel Open Source Graphics Programmer's Reference Manual (PRM)
Volume 2c: Command Reference: Registers (Haswell)
https://01.org/linuxgraphics/documentation/hardware-specification-prms/2013-intel-core-processor-family
Change-Id: I6f7832293215d2b53e31b0a5c985e6098eb72f1b
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29385
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On my system (Pentium G3258, ASRock H81M-HDS), changing the the slow
ramp rate during `initialize_vr_config()` results in the following
exception, causing the system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
So, only change this setting for Haswell ULT CPUs, as suggested by the
BIOS Writer's guide.
Change-Id: I79b10139295741d298ac6c77c4f7272ac151ad90
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29384
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the Haswell-specific monotonic timer is used on an ASRock H81M-HDS
with a Pentium G3258, the following exception is generated, causing the
system to hang.
CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting
Code: 0 eflags: 00010006 cr2: 00000000
eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000
edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90
The exception occurs when trying to read `MSR_COUNTER_24_MHz`, located
at 0x637. This MSR only exists on Haswell-ULT CPUs.
So, allow boards to use the TSC monotonic timer instead. They can do
this by placing `select TSC_MONOTONIC_TIMER` in the mainboard Kconfig.
Change-Id: I31d0e801b8cc85330dcb70c3fc03670f2e677e8f
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29383
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The super I/O setup needs to be done after the LPC is enabled. For
Lynx Point, configuring the super I/O in `mainboard_romstage_entry()`
is too early to get a serial console output. To remedy this, add a
function `mainboard_config_superio()` that will be called at the
appropriate time, and can be overridden by mainboard code.
Change-Id: Iaf4188a17533c636e7b0c7efa220bc6a25876dda
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29382
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch is based on a8a9f34e9b7b ("sb/intel/i82801{g,j}x:
Automatically generate ACPI PIRQ tables")
Tested on an ASRock H81M-HDS. The generated _PRT object looks correct,
and the system doesn't show any issue when running. The following
assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:16.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1a.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1c.1: pin=1 pirq=1
ACPI_PIRQ_GEN: PCI: 00:1c.2: pin=2 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1c.3: pin=3 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=7
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=1 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=2 pirq=2
Also tested on a Google Peppy board. The following assignments occur:
ACPI_PIRQ_GEN: PCI: 00:02.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:03.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:14.0: pin=0 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1b.0: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1c.0: pin=0 pirq=0
ACPI_PIRQ_GEN: PCI: 00:1d.0: pin=0 pirq=3
ACPI_PIRQ_GEN: PCI: 00:1f.2: pin=0 pirq=6
ACPI_PIRQ_GEN: PCI: 00:1f.3: pin=1 pirq=2
ACPI_PIRQ_GEN: PCI: 00:1f.6: pin=2 pirq=1
A diff of the _PRT object for the Google Peppy board is below. The code
used in the diff has been modified for clarity, but the semantics remain
the same. To summarise the diff:
* The disabled PCIe root ports are no longer included.
* The LPC controller is no longer included, as it has no interrupt pin.
The pins for the remaining LPC devices are each one less. Perhaps the
original _PRT object was incorrect?
* The SDIO device is no longer included, as it is disabled.
* The Serial IO devices are no longer included, but that is due to a
separate issue I am having with this system (the devices don't show up
under Linux regardless of this patch). In short: their omission is not
a fault of this patch.
--- pre/_PRT
+++ post/_PRT
@@ -1,301 +1,157 @@
Method (_PRT, 0, NotSerialized) // _PRT: PCI Routing Table
{
If (PICM)
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0003FFFF,
Zero,
Zero,
0x10
},
Package (0x04)
{
0x0014FFFF,
Zero,
Zero,
0x12
},
Package (0x04)
{
0x001BFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001CFFFF,
Zero,
Zero,
0x10
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- Zero,
- 0x11
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- Zero,
- 0x12
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- Zero,
- 0x13
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
Zero,
0x13
},
Package (0x04)
{
0x001FFFFF,
Zero,
Zero,
0x16
},
Package (0x04)
{
0x001FFFFF,
One,
Zero,
0x12
},
Package (0x04)
{
0x001FFFFF,
0x02,
Zero,
0x11
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- Zero,
- 0x10
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- Zero,
- 0x14
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- Zero,
- 0x15
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- Zero,
- 0x17
}
})
}
Else
{
- Return (Package (0x12)
+ Return (Package (0x09)
{
Package (0x04)
{
0x0002FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0003FFFF,
Zero,
^LPCB.LNKA,
Zero
},
Package (0x04)
{
0x0014FFFF,
Zero,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001BFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001CFFFF,
Zero,
^LPCB.LNKA,
Zero
},
- Package (0x04)
- {
- 0x001CFFFF,
- One,
- ^LPCB.LNKB,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x02,
- ^LPCB.LNKC,
- Zero
- },
-
- Package (0x04)
- {
- 0x001CFFFF,
- 0x03,
- ^LPCB.LNKD,
- Zero
- },
-
Package (0x04)
{
0x001DFFFF,
Zero,
^LPCB.LNKD,
Zero
},
Package (0x04)
{
0x001FFFFF,
Zero,
^LPCB.LNKG,
Zero
},
Package (0x04)
{
0x001FFFFF,
One,
^LPCB.LNKC,
Zero
},
Package (0x04)
{
0x001FFFFF,
0x02,
^LPCB.LNKB,
Zero
- },
-
- Package (0x04)
- {
- 0x001FFFFF,
- 0x03,
- ^LPCB.LNKA,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- Zero,
- ^LPCB.LNKE,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- One,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x02,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0015FFFF,
- 0x03,
- ^LPCB.LNKF,
- Zero
- },
-
- Package (0x04)
- {
- 0x0017FFFF,
- Zero,
- ^LPCB.LNKH,
- Zero
}
})
}
}
Change-Id: Id3f067cbf7c7d649fbbf774648d8ff928cb752a4
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested on a Pentium G3258.
Change-Id: Ibf020c034c00b3bf3a7b0cda8bd3a7d40c4c13bd
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: I3679d1ab0ae08726bff04c5985d6d93437b2fb81
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: Ie162cb7a27e313ffe612659e8444657a3772d3c9
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29378
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Romstage is where DRAM comes online. Therefore, allow
raw CAR_GLOBAL object access in all cache-as-ram stages
that are not romstage. In practice, this should be a nop.
However, the explicit check for romstage is clearer.
Change-Id: I31454c05029140a946ef663b8fa1b2fa6a788154
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
For platforms utilizing CONFIG_NO_CAR_GLOBAL_MIGRATION there's
no need to automatically migrate globals. Because of this it's
possible to automatically allow for uninitialized global variables
which reside in the .bss section without needing to decorate those
objects with CAR_GLOBAL.
Change-Id: Icae806fecd936ed2ebf0c13d30ffa07c77a95150
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/29359
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The PCI ID was taken from the output of `lspci` on an ASRock H81M-HDS.
Change-Id: Idc222392a0973f9ea62b943d18dd762b48c76d17
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The PCI IDs were taken from the Intel Lynx Point datasheet [1].
[1] Intel® 8 Series/C220 Series Chipset Family Platform Controller Hub
(PCH) Datasheet, revision 003, document number 328904.
Change-Id: Ie4a264e9325d185334c3d7f7d2ed3c394ac33059
Signed-off-by: Tristan Corrick <tristan@corrick.kiwi>
Reviewed-on: https://review.coreboot.org/29376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change the variant name from kalista to karma.
According to the CL:1298319, the baseboard name is kalista
and the board name is karma.
BUG=none
BRANCH=master
TEST=emerge-kalista coreboot chromeos-bootimage
Change-Id: Idea295cc14249721a6dc0fc4e2ef6470d43e16eb
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29314
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia669b25683c138d96be00db90d01cf406db4c2eb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29404
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idf10a09745756887a517da4c26db7a90a1bf9543
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
In commit 41baf0c3ff (soc/amd/stoneyridge: Remove dev_find_slot where
possible), the register being read was changed accidentally from
HT_DEV (Device 18h, Func 0) to NB_DEV (Device 18h, Func 5)
This doesn't return the correct value, and causes Grunt to reboot.
BUG=b:118721473
TEST=Boot grunt
Change-Id: I7b73358a074dd27639aafead7c8b39f0fad5685f
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29367
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The function domain_read_resources() didn't have any code to actually
reserve any resources - it was just creating an empty resource entry.
I looked at fixing it to actually reserve the space, but the values in
the registers at the point when this runs aren't the final values that
we want to reserve anyway, they're temp values with a range much larger
than we want to reserve.
I next looked at moving the amd_initcpuio() function earlier so that we
could get the correct values for the registers, but even that doesn't
give us what we really want.
Ultimately removing this whole function seems to be the right thing.
BUG=None
TEST=Verify that the only resource that changes is the empty resource:
PCI: 00:18.0 resource base 0 size 0 align 0 gran 0 limit 0 flags 1 index 1080
Change-Id: I83bd3ea8db141416632c12fc883386070363f2f1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29345
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
The speakers start up muted, and the EC must be told by the BIOS
to unmute it. This helps prevent popping noises on boot/resume.
Change-Id: I693f1d01e46e19362ef8fd0d5b3f4930967b5a12
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29203
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI devices for the basic SuperIO functionality provided by the EC
for PS/2 keyboard, PS/2 mouse (trackpad emulation), and legacy UART.
The specific defines to enable these devices should be declared by the
mainboard before including this ASL, the same as the Chrome EC behavior.
Change-Id: I910940ebf26b8758ab12d695e1eba9c668c640c6
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add methods to handle ACPI EC events at runtime. Currently only
some common events are handled like lid switch and battery info,
and the event status is printed for debug on other events.
Change-Id: Ic0bd070940c8a2dfa6a251f3464301418bdb69c1
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the expected objects (_BST, _BIF, _BIX) for reading battery
information and status from the embedded controller, and the
expected objects for reporting AC power status.
The battery was tested by booting with a battery attached and checking
that it is present in /sys/class/power_supply/BAT0 and that the values
are consistent and within expected ranges.
The AC device was tested by checking the AC status in sysfs when AC
is inserted or removed while the system is running.
Change-Id: Ie996891c383c9e990736690aef9795512ad6d35a
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add the base ACPI support for the Wilco embedded controller, using
ASL 2.0 syntax throughout.
This includes the EC device and its resources, as well as the layout
for the EC RAM and the functions needed to read and write to the EC RAM.
The EC RAM address space is typically read/write, and so the ACPI EC
device expects that a defined Field can be read and/or written. With
this EC the read and write address spaces are different. For example,
a read from address zero will return data that is unrelated to what a
write to address zero expects.
This makes using a typical OperationRegion to describe the EC RAM
address space somewhat impracticle, since field definitions would
overlap. Instead, methods are provided for reading and writing to an
EC RAM offset, and the EC RAM layout is defined as a Package that
describes offset+mask for read or write fields within the EC RAM.
Change-Id: If8cfdf2633db1ccad4306fe877180ba197ee7414
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a function for use in bootblock stage that performs early init
of the EC, in particular setting it up for UART passthrough so a
legacy serial port can be used by the host.
This needs to be called by the mainboard that intends to use it
in bootblock in order for the UART to be available in later stages.
Some of the PNP style programming may look odd, but it is following
the EC specification which is not entirely standard. This code has
been tested on a board with this EC and it is functional.
Change-Id: I9d6935a9fdf0d7290a94bf2ee565ef2a7c00ecc7
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Send a command to the EC on the way into S3 suspend state telling
it to save the PS/2 data, and on resume send it a command for
restoring the PS/2 data that was previously saved.
Change-Id: Ic4b5d6d2656dbb1c476b9211b0d60c71b0cd7b32
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29120
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC handlers for specific SMM actions:
- on entry to sleep state tell the EC to save state and to prepare for
the host to enter sleep
- on ACPI enable/disable send command to the EC
- add a function to print SMI reasons when eSPI SMI is received
These need to be called by the mainboard handlers which will be done
when a board is added that uses this EC.
Change-Id: Ibabdc1462e0a8df405f9520244b83684e2ccf2f5
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29119
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The EC expects to receive updates about the BIOS boot progress. This is
used for the EC logging to track system boot completeness. If the EC is
not informed about BIOS progress it will turn the system off 30 seconds
after the boot starts.
Change-Id: I693c3930117db2b69a119aee0380d6f303c4881c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29118
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a chip_operations structure for Wilco EC and hook it into the device
tree so it can be initialized at boot.
Reserve the device resources specified in Kconfig, which will also
create the device IO windows if they have not been created in bootblock.
If the IO windows already exist (becauase they were specified in the
mainboard devicetree.cb) then this will find the existing entry instead.
During device init stage prepare the keyboard for use, which is required
for it to be functional in firmware and OS with this EC. Also send a
command to the EC telling it to pass the power button through to the
host for processing.
Change-Id: I0adb01cf394f939f4a28aeb47fe4d0bcda5957d9
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29117
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add EC mailbox commands that are related to the power and state of the
system. These commands include:
- read the power status registers from the EC
- read & clear the power status registers
- helper function to read the current lid state
- tell the EC why the host is about to power off
- tell the EC that the host is about to enter a sleep state
Change-Id: Iaa7051b4006e3c1687933e0384d962516220621f
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29116
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add basic supported mailbox commands for this embedded contrlller,
and define some command functions to retrieve and print information
about the EC.
Change-Id: Ibcef7d58e1852fdb2e52b97acd4b51a26dd8cd77
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29115
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add helper functions that make it more convenient to send and receive
the most common types of commands to the Wilco embedded controller.
Change-Id: I9cee1a3b2f9d507f6ecdfae9f4a34ba59056cb91
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29114
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Google "Wilco" Embedded Controller is a new embedded controller that
will be used in some future devices. The mailbox interface is simliar
to the existing Chromium EC protocol version 3, but not close enough
that it was convenient to re-use the full Chrome EC driver.
This commit adds the basic mailbox interface for ramstage which will be
used by future commits to send varous mailbox commands during the boot
process. The IO base addresses for the mailbox interface are defined in
Kconfig so they can be changed by the mainboard if needed.
Change-Id: I8520dadfa982c9d14357cf2aa644e255cef425c2
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/29113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Confirm with RK, H9CCNNNBKTMLBR-NTD uses this sdram config.
sdram-lpddr3-hynix-4GB.inc
BUG=b:117967129
BRANCH=master
TEST=None
Change-Id: I98afc33fd2cb61343be0dcdc007add75bee9c2af
Signed-off-by: Loop_Wu <Loop_Wu@asus.com>
Reviewed-on: https://review.coreboot.org/29366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Move soft_reset() to `southbridge/amd/common/` it's only used for
amdfam10 now.
Drop hard_reset() for good.
Change-Id: Ifdc5791160653c5578007f6c1b96015efe2b3e1e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add a new function which can hash a given region device and extend a PCR
in the TPM with the result. The needed SHA algorithms are included from
3rdparty/vboot and thus not duplicated in the coreboot tree.
For now VB2_LIB is not usable in postcar stage. Follow-up commits will
add the ability to use the lib in postcar as well. Once this feature is
ready, the library will be included in postcar stage to make this
function available in every stage.
Change-Id: I126cc3500fd039d63743db78002a04d201ab18aa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/29234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
When used more widely across the tree, we don't want to have
to worry if all its users are on the same architecture
(eg. aarch32 vs aarch64), so just build their own library for
each stage.
Change-Id: Ib6807ff73c2713f3b23f43055325b2c40ff1a17d
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
GLK FSP 2.0.6.0 has properly determined MR1 value during InitializeJedec.
Revert the w/a code "odt_config |= nWR_24" in coreboot.
BUG=b:118422998
CQ-DEPEND=CL:*703187
TEST=Verified booting to kernel.
Change-Id: I6dd3c14b2048259a5518e1f72ff1061b9c5c7dfe
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29276
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
According to syndra thermal table, PL2 need to check cpu id.
Set up syndra PL2 value.
1. KBL_U PL2 is 25w.
2. KBL_R PL2 is 29w.
Refer to b:116836990#comment10.
BUG=b:116836990
TEST=The thermal team verify OK
Change-Id: I766a886121a089683565608252b4c176c70e88a3
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29269
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
BUG=b:112110028
BRANCH=none
TEST=boot into recovery
in ec console:
kblog on
(type on keyboard)
kblog
make sure buffer is not empty
Change-Id: I6525c2a46eef835dc64682466364a5b8fbb35226
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
Change-Id: Ic9022a98878a2fcc85868a64aa9c2ca3eb2e2c4e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29177
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7e8de35dcdad52bb311b34bfa9b272d17ed3186b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29243
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of forcing the IOMMU to be enabled, change it to only be enabled
if the device is enabled in devicetree.
BUG=b:118612241
TEST=Verify that IOMMU is disabled.
Change-Id: I6cfd6c81f47de23c54a49ec7cf87b219215ced5e
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
|
|
Unfortunately Stoney has an issue where enabling the IOMMU causes
a 10%-50% decrease in the integrated graphics performance. It is
also disabled by default on other stoney platforms.
BUG=b:118612241
TEST=Verify that IOMMU is disabled.
Change-Id: Ia396c7227cb21461ec8afbdf746721d4fb28083d
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/29342
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Daniel Kurtz <djkurtz@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The procedure dev_find_slot has 3 main uses. To find configuration
(devicetree), to verify if a particular device is enabled at build \
time, and to get the address for PCI access while in bootblock/romstage.
The third use can be hidden by using macros defined in pci_devs.h,
making it very clear what PCI device is being accessed. replace the
temporary pointers to device used with PCI access with SOC_XXX_DEV where
XXX is the device being accessed, and remove the setting of the temporary
pointers.
BUG=b:117917136
TEST=Build grunt.
Change-Id: Ic38ea04bfcc1ccaa12937b19e9442a26d869ef11
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29227
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
This mainboard is based on mc_apl1. In a first step, it concerns a copy
of mc_apl1 directory with minimum changes. Special adaptations for
mc_apl3 mainboard will follow in separate commits.
Change-Id: I963ec63bccf71296c3fdabfcf9f3009c2febc791
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/29353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Extend the SPI interface to enable write-protection.
Tested on Cavium EVB CN81xx using W25Q128.
Change-Id: Ie3765b013855538eca37bc7800d3f9d5d09b8402
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/25105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: Ia97ddcd5471f8e5db50f57b67a766f08a08180b1
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/29349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change-Id: I6a9d71e69ed9230b92f0f330875515a5df29fc06
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/29312
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Just disable the timer interrupt and notify supervisor.
To receive another timer interrupt just set timecmp and
enable machine mode timer interrupt again.
TEST=Run linux on sifive unleashed
Change-Id: I5d693f872bd492c9d0017b514882a4cebd5ccadd
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Pointer to opcode increases by unit uint16_t not byte.
Change-Id: I2986ca5402ad86d80e0eb955478bfbdc5d50e1f5
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
Return correct memory location for cbmem instead of incorrectly returning memory size.
Change-Id: If7f490a46edebb04c2280bf317d1adacef08f30d
Signed-off-by: Philipp Hug <philipp@hug.cx>
Reviewed-on: https://review.coreboot.org/29197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Xiang Wang <wxjstz@126.com>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Now that bounce buffers are gone, and we can elide the selfload checking
code at build time, it is safe to add selfboot to the romstage.
Make it so.
This required a few other tweaks to rules.h and selfboot.c
to make it buildon ARM.
Change-Id: Ib6540921ad7cd7d58bfeab881d3978325b303cc2
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/29338
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
A stack overrun has been observed on AMD64 CPUs during the SMM module
relocation process. Change the assumed required size from equaling the
save structure's size to a Kconfig symbol.
A value of 0x400 doubles the size used by AMD64 systems and maintains
the size used by EM64T.
BUG=b:118420852
TEST=S3 on Grunt and verify 0x2f000-0x30000 uncorrupted
Change-Id: Ib1d590ee4afb06ca649afd6ad253cdfd969ae777
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/29277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Variants of Nami need to accommodate single channel DDR. Will use
GPP_D10 on nami for identification. GPP_D10 will return 1 when device
is using single channel DDR and 0 when using dual channel DDR.
BUG=b:117194353
BRANCH=None
TEST=dmidecode | grep Channel and make sure that the correct number of
channels gets returned.
Change-Id: If86ab2c5404c4e818ce496ea935227ab5e51730a
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/29233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
port is allocated in ACPI, without checking for value.
Don't use port value when zero.
BUG=N/A
TEST=Portwell PQ-M107
Change-Id: Ia44281b82d003b29bffbf985b774ddd661b65c4e
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/29331
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Looks like we must do it in the same way as in l520, t420, t420s,
t430s, t520, t530, x201, x220, x230 models. No idea why t430 should be
handled differently.
Change-Id: Ic4851022267caca267b667b4e3c327838e0a0b66
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29031
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Apply commit 12d681b2 (intel/i945 gm45: Use acpi_s3_resume_allowed())
also to the Lenovo T400.
See also commit 42ae0bae with Change-Id
I4e1e0ccf2abbe175c0e5ddcbb6ee7bf6afb1ae88 (mb/lenovo/x200: Use
acpi_s3_resume_allowed())
Change-Id: I9d4ac711375977a979a8b3e5606e2197847e88de
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
|
|
Move the usage instructions from their ad-hoc place in Kconfig.name to
the Documentation directory, and expand them a bit.
Change-Id: Id6c7bbca40a21ecba00cab736af2f2662a985106
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-on: https://review.coreboot.org/28874
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Philipp Hug <philipp@hug.cx>
|
|
Like in ce1064e (tegra124_lp0: make sure to build with compiler.h
included), fix builds where `compiler.h` is needed.
Change-Id: If4b60a9db4520b58e48339a7e2726f2545cb4102
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/29311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Required to compensate for Chrome OS' tree differences
Change-Id: I01fe80b55c69ff57da1c96a76bd1d9b5a2d4a9a8
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/29293
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Linking should allow to link depending on possible future variants.
E.g. in Makefile.inc romstage-$(CONFIG_'VARIANT0') += gpio_variant0.c
etc.
This commit follows up on commit 7dee9745 with Change-Id
I88b5ef8e12ac606751952a493f626e1b146e98f7 ("mb/lenovo/x201: Link gpio
map instead of including a header").
Change-Id: Ibdb96deafbe422bf50fd2e1fc56a57ae53ccd5a0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
IGD display handling was rewritten with commit dd2bc3f8 with Change-Id
I556769e5e28b83e7465e3db689e26c8c0ab44757 ("igd.asl rewrite"). These
comments were removed as well (with some accidentally left behind).
Let's remove them and those who were introduced later with new ports.
Change-Id: I8d3e12d0c3b03b0de38e65f36b94ed706fbf893c
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29271
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These ifdefs are the remains from the following commits:
* fa1d688a with Change-Id I9909a5b2bdb4b59219db6304fa4332802fe0301c
("sandy/ivy native: dedup romstage.c main()")
* 7dee9745 with Change-Id I88b5ef8e12ac606751952a493f626e1b146e98f7
("mb/lenovo/x201: Link gpio map instead of including a header")
Change-Id: If83189688151f531a05780a87db3409cbacfbeff
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/29283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
* Distinguish between TPM 1.2 and 2.0
ACPI table support
* Add TPM2 table support for TIS interface only
Change-Id: I030c7ea744bcfe61ebef8d66d1295273b5dccda5
Signed-off-by: Philipp Deppenwiese <zaolin@das-labor.org>
Reviewed-on: https://review.coreboot.org/29181
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Clone entirely from mainboard/intel/cannonlake_rvp
commit id: af89f49b83260a04dece84b34e97560fb85d29ae
List of changes on top off initial cannonlake_rvp clone
1. Rename "Cannonlake" with "Icelake".
2. Replace "cannonlake_rvp" with "icelake_rvp".
3. Rename "cnl" with "icl".
4. Remove unwanted SPD file, will add correct SPD with mainboard
patches.
5. Remove NHLT related implementation.
6. Remove FSP configs, will add once FSP headers are available.
7. Removed smihandler.c, will add later if needed.
Change-Id: I875972d1fb2f630bf5eb29bd955c484e7f9aa415
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29164
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
icelake FSP is still under development and hence the FSP header files
and binaries are not available on github. Meanwhile add basic header
files required to compile the SoC and mainboard with FSP2.0.
BUG=None
BRANCH=None
TEST=Build for icelake_rvp board successfull.
Change-Id: I9ab8f180b572ec553e7531f7483d091f6897c462
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/29163
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clone entirely from Cannonlake
commit id: 3487095304dbbbf66de86f8bce0e40b7acb3ea27
List of changes on top off initial cannonlake clone
1. Replace "Cannonlake" with "Icelake"
2. Replace "cnl" with "icl"
3. Replace "cnp" with "icp"
4. Rename structrue based on Cannonlake with Icelake
5. Remove and clean below files
5.a. All NHLT blobs and related files.
5.b. remove cnl_memcfg_init.c file, will be added later.
5.c. Remove vr_config.c, this is WIP.
5.d. Clean up upd override in fsp_params.c,
will be added once FSP available.
5.e Remove CNL-H based GPIO configuartion.
Ice Lake specific changes will follow in subsequent patches.
Change-Id: I756fa7275c4190aebc0695f14484498aaf5662a5
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/29162
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove unused members in emi_mpu_regs and sdram_params. Change
mpu_ctrl_d to array so the offset (0x804) for D1 is corrected.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: I95c002058dc5e1cba868334fecf8f42bd3e497e6
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/29251
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ACPI PM timer emulation will be added back as default FSP stops TCO count
for power saving, which will also stop ACPI PM timer within PCH. CPU PM TIMER
EMULATION will help UEFI payload pass, instead of endless loop wait for
ACPI PM timer counter to increase.
BUG=N/A
TEST=Build and boot up fine with whiskey lake rvp board into UEFI shell.
Change-Id: Ie069e815e6244c3f85fabf51e186311621d316fd
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/28937
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The selfboot function was changed at some point to take a parameter
which meant "check the allocated descriptors to see if they target
regions of real memory."
The region check had to be buried deep in the last step of loading since
that is where those descriptors were created and used.
An issue with the use of the parameter was that it was not possible
for compilers to easily divine whether the check code was used,
and it was hence possible for the code, and its dependencies, to be
compiled in even if never used (which caused problems for the
rampayload code).
Now that bounce buffers are gone, we can hoist the check code
to the outermost level. Further, by creating a selfload_check
and selfload function, we can make it easy for compilers
to discard unused code: if selfload_check is never called, all
the code it uses can be discarded too.
Change-Id: Id5b3f450fd18480d54ffb6e395429fba71edcd77
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/29259
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
In function agesa_GfxGetVbiosImage(), the function name is used in a print
string. Use __func__ instead.
BUG=b:117642170
TEST=Build grunt.
Change-Id: I95a042bd95cc729305a8a008e3bb464f60c2668d
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
In function write_pirq_routing_table(), the function name is used in a print
string. Use __func__ instead.
BUG=b:117642170
TEST=Build grunt.
Change-Id: Ibf8673c5b2cda1105aae1edb46f6589d55208c50
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
File ramtop.c has one instance of if()/else where the if tests for top mem
in lower 4GiB, and returns just before the "else" statement. These "else"
statements are not needed.
BUG=b:117648025
TEST=Build and boot grunt.
Change-Id: Iba16a416e78dae75a95a11d38179161c5a11b2ad
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/29247
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds following changes,
- APL, CFL, DENVERTON soc's using same implementation to setup and
teardown FSP CAR. Hence cache_as_ram_fsp.S from soc folder is
cosolidated into one file and moved to common code CPU car folder.
- exit_car_fsp.S is from APL, DNV soc folder is clubbed into one file
and moved to common CPU car.
- The new file apollolake/fspcar.c is addded to pass tempraminit
parameters.
- Coffee lake Soc uses FSPT to support Intel Security features like
BootGuard verify boot and Measured boot. Add FSP CAR support for CFL
by programming tempraminit parameters and add FSP_T_XIP default if
FSP_CAR is selected.
BUG= None
TEST= Build for both CFL RVP11 & RVP8 and verified for successful CAR setup.
Build for both leafhill and harcuvar platform by selecting CONFIG_FSP_CAR
without errors.
Change-Id: I98d2dd9711ddc0d7ea7d1672fba700259ee3a3a9
Signed-off-by: Praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/29209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add a new variant of fizz for the kalista board.
Key differences from baseboard include:
- GPIO changes
- devicetree.cb changes
BUG=b:117066935
BRANCH=master
TEST=Build (as initial setup)
Change-Id: I808c5e0883049575cbedd181c249a78a833fa96a
Signed-off-by: David Wu <David_Wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29205
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change enables override device tree for Fizz to allow variants to
provide their own overrides and also moves I2C5 realtek node to
fizz/overridetree.cb since it doesn't apply to some variants being
added for Fizz.
Change-Id: Ia1a069fc539b51a22882ef94b55baf5bf7cd302f
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Get recovery mode switch from EC and pass it to payload.
BUG=b:80501386
BRANCH=none
Test: Boots correctly on Kukui.
Change-Id: Ib92afca885e5a97ec4646f55f2279ef56a61af5a
Signed-off-by: Tristan Shieh <tristan.shieh@mediatek.com>
Reviewed-on: https://review.coreboot.org/29190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Add ACPI entry in sleepstates.asl to support S4 (hibernate).
TEST: boot to Windows on CFL RVP11 & RVP8, verified hibernate functionality.
Change-Id: I751c774e6ec7fd89ac3af5a619033bd38a759281
Signed-off-by: praveen hodagatta pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/28846
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Accurately reflect the intention of the syslimit value returned
from AmdInitPost(). Assume FFs for the non-present bits.
BUG=b:118178425
TEST=Boot Grunt and verify reported value = TOM2-1.
Change-Id: Ie8ea4fcbfd52c46ad441890f0decaf0f55816cfd
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/29229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Liara auto restart issue is caused by memory access error and consequent
kernel panic. To solve this issue, revert the CL:1243666 (Disable
NbP-state on Liara) and use 2T mode instead.
BUG=b:116082728
TEST=verify the 2T mode is enabled/boot into ChromeOS and no auto restart/run
memtester passed 10 cycle.
Change-Id: I3a96276d88ffb70530d72b15c07b59a01cc6209a
Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29179
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
8M was set in the assumption that at least 4M was needed for IED
(Intel Enhanced Debug) , but this is not true.
The SMRR MTRR's need to have TSEG aligned to its size which is easier when TSEG
is only 2M. Also at most 6M of RAM more becomes available for use.
Change-Id: I4b114c8dc13699b3c034f0a7060181d9d590737b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27873
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Do not assume:
- TSEG is 8M
- IED_REGION_SIZE is set (not needed on older platforms).
Change-Id: I1aadc6f0459a8035864dcf02b0a07e00b284fe2a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27872
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DRAM init sequence is simply setting some values on register
for all DRAM modules, no logic involved;
so we can replace it by an array to configure easily.
BUG=b:80501386
BRANCH=none
TEST=Boots correctly on Kukui, and inits DRAM successfully with related
patches.
Change-Id: Iacd3ce909ba7a0bdf699c5bfcb2b97f383d7bb6f
Signed-off-by: Huayang Duan <huayang.duan@mediatek.com>
Reviewed-on: https://review.coreboot.org/28836
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Change-Id: I05f9ea97ea80ac7a8f34845c59bd66e424ba2991
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/28709
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Having cbmem floating between two ram regions is a bad idea and some
payloads (e.g. tianocore) even bail out on this. To overcome this issue mark the
region between tom and cbmem as uma.
Change-Id: Ifab37b0003f09a680024d5b155ab0bb157920952
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Fixed resources have to be registered early during
read_resources() phase, such that device allocator
will avoid them.
Change-Id: Iff5f1426015a908e988ff757055034c87085c0f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/27119
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current header file included a proprietary license, fix that by using
same license shared on public fsp release on fsp.
BUG=https://ticket.coreboot.org/issues/177
TEST=N/A
Change-Id: I129c8a465e702d3885d994f4fab352b34d46f177
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/29224
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Kelling <ian@iankelling.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
1. Update PSV values for cpu and sensers.
2. Change PL1 min value from 3w to 4.5w.
3. Change TSR2 TRT source from charger to CPU.
Refer to 112448519#comment31.
BUG=b:112448519
TEST=Build coreboot for Octopus board
Change-Id: I7c7df0f54374fdaa4cf57d5c255d841d7db38cfc
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/29146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This change uses CRFP ACPI name for FP device since user space
utilities expect this name for triggering different actions.
BUG=b:112974410
BRANCH=nocturne
Change-Id: I63309227c916b43917e529c223cf738fc3baa209
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29231
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On rammus, set GPIO GPP_C22 to 1 for touchscreen power on.
And add touchscreen device "PNP0C50" to I2C0.
According to touchscreen spec, device power on initialization takes
105 ms, so set "generic.enable_delay_ms" to 120.
We found there is i2c error log pop up when we set delay
time to be 110ms or 105ms. If we set delay time to be
120ms. System will not pop up i2c error log.
BUG=b:115944726
BRANCH=master
TEST=emerge-rammus coreboot chromeos-ec chromeos-bootimage
Flash FW to DUT, and make sure touchscreen works.
Change-Id: Ibce552d04991e85c99ae3a0a92455fc747d9fced
Signed-off-by: YanRu Chen <kane_chen@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/28598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
- should not check VBOOT_STARTS_IN_BOOTBLOCK to set context flag
- implement vboot_platform_is_resuming on platforms missing it
- add ACPI_INTEL_HARDWARE_SLEEP_VALUES to two intel southbridges
[ originally https://review.coreboot.org/c/coreboot/+/28750 ]
BUG=b:114018226
TEST=compile coreboot
Change-Id: I1ef0bcdfd01746198f8140f49698b58065d820b9
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/29060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
Change TSS layer tlcl_send_startup() to expose TPM_RC_INITIALIZE,
which gets mapped to TPM_E_INVALID_POSTINIT. The return value
is exposed to TSPI layer tpm_setup(), and dealt with as follows:
- Regular startup: TPM_E_INVALID_POSTINIT should count as failure.
- S3 resume: TPM_E_INVALID_POSTINIT can be assumed to mean that
TPM maintains power during S3, and is already initialized.
Also, correct an error where |response| could be erroneously accessed
when it is set to NULL.
BUG=b:114018226
TEST=compile coreboot
Change-Id: Ib0c3750386ae04279401c1dc318c5019d39f5ecf
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/29063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
|
|
This change uses DIMM_INFO_PART_NUMBER_SIZE to decide the size of
part_num_store that holds the number of DRAM part. It ensures that
host advertises the supported size to read part number from the EC.
BUG=b:115697578
Change-Id: I8439a301fc037b0acdc8b1226ad04d2f363838ef
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/29241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Jett Rink <jettrink@chromium.org>
|
