coreboot.git - my copy of coreboot

Age	Commit message (Collapse)	Author
2020-05-12	nb/intel/i440bx: Drop mainboard_enable_serial()	Keith Hui
	All boards using this northbridge now enable serial in bootblock, so this is no longer needed. Change-Id: I6baf2de81870dbba2a7f1abb3f1fdd6716d64511 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41048 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12	soc/amd/common/block/lpc: Split lpc_set_spibase() into two functions	Furquan Shaikh
	This change splits lpc_set_spibase() into two separate functions: lpc_set_spibase() - Sets MMIO base address for SPI controller and eSPI controller (if supported by platforms) lpc_enable_spi_rom() - Enables SPI ROM This split is done to allow setting of MMIO base independent of ROM enable bits. On platforms like Picasso, eSPI base is determined by the same register and hence eSPI can set the BAR without having to touch the enable bits. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3f270ba1745b4bb8a403f00cd069a02e21d444be Reviewed-on: https://review.coreboot.org/c/coreboot/+/41247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-05-12	soc/amd/common/block: Add support for common config for AMD SoCs	Furquan Shaikh
	This change adds support for struct soc_amd_common_config that allows multiple AMD SoCs to share common configuration. This can then be used by common/block drivers to get the required configuration from device tree. It also provides function declaration for soc_get_common_config() that needs to be provided by SoCs making use of the common configuration structure. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Idb0d797525414c99894a8e4ede65469381db7794 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41246 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12	nb/intel/sandybridge: Reorder IOSAV writes	Angel Pons
	We only write to the IOSAV LFSR registers twice, but we do so between the writes to the other four IOSAV per-subsequence registers. Since we know that the IOSAV is sleeping when we program the subsequences, we might as well do the two oddball LFSR register writes after we have programmed the always-written-to group of four registers. That way, subsequent changes can reproducibly replace the four writes with a single macro. Tested on Asus P8Z77-V LX2, still boots. Change-Id: If7bb14a9862a53a3eba565d17401347dcc9ffbe9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40973 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12	nb/intel/sandybridge: Reorder register write	Angel Pons
	Reorder the order of the operands in three register writes, so that replacing them with macros in a follow-up does not change the binary. Tested on Asus P8Z77-V LX2, still boots. Change-Id: I44aee9c0f49770586de322ee7f44c3609dbadd0b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40972 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-12	trogdor: Add support for rev1	Julius Werner
	This patch implements the pin changes needed for Trogdor rev1. Unfortunately, coreboot has to get the EC and TPM SPI busses compiled into Kconfig, so we cannot really build a single image that runs on both revisions. Introduce a Kconfig to handle this instead. Change-Id: I2e48dc4565682c12089b6cf92c29f4cef4d61bb8 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	sc7180: clock: Add support to bump CPU levels	Taniya Das
	Add support to configure the Silver and L3 PLLs and switch the APSS GFMUX to use the PLL to speed up the boot cores. Tested: CPU speed frequency validated for speed bump Change-Id: Iafd3b618fb72e0e8cc8dd297e4a3e16b83550883 Signed-off-by: Taniya Das <tdas@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-05-11	sc7180: Adjust memory allocations per upstream comments	T Michael Turney
	Update memory regions, etc. Change-Id: If852fe4465fb431809570be6cdccff3ad9d9f4f0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39362 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	trogdor: QCSDI loading depends on VB2_GBB_FLAG_RUNNING_FAFT setting flag	Ashwin Kumar
	Change-Id: I63f35c94bc6c60934ace5fe0fd9176443059b354 Signed-off-by: Ashwin Kumar <ashk@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36518 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	trogdor: Latch GPIO interrupt support	rbokka
	Required for TPM IRQ. Change-Id: I8198213cf2808be5291620892185b1e534263e3f Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38714 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	trogdor: mainboard reference all QUPv3 FW drivers	T Michael Turney
	Change-Id: I8ff5dd63fac28ffa558aec71e79a6de87d7885e0 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37306 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	sc7180: Fix for hang during DMA transfer in SPI-NOR flash driver	satya priya
	Transfer sequence used by SPI-Flash application present in CB/DC. 1. Assert CS through GPIO 2. Data transfer through QSPI (involves construction of command descriptor for multiple read/write transfers) 3. De-assert CS through GPIO. With above sequence, in DMA mode we dont have the support for read transfers that are not preceded by write transfer in QSPI controller. Ex: "write read read read" sequence results in hang during DMA transfer, where as "write read write read" sequence has no issue. As we have application controlling CS through GPIO, we are making fragment bit "set" for all transfers, which keeps CS in asserted state although the ideal way to operate CS is through QSPI controller. Change-Id: Ia45ab793ad05861b88e99a320b1ee9f10707def7 Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39807 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	soc/amd/common/block/lpc: Reorganize LPC enable resources	Furquan Shaikh
	This change moves all the logic for setting up decode windows for LPC under configure_child_lpc_windows() which is called from lpc_enable_children_resources(). This is in preparation to configure decode windows for eSPI differently if mainboard decides to use eSPI instead of LPC. Side-effect of this change is that the IO decode registers are written after each child device resources are considered. BUG=b:154445472 Change-Id: Ib8275bc4ce51cd8afd390901ac723ce71c7a9148 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41070 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	soc/amd/common/block/lpc: Add config options for eSPI	Furquan Shaikh
	eSPI on Picasso is configured using the LPC bridge configuration registers. This change enables config options to allow SoC to select if it supports eSPI (SOC_AMD_COMMON_BLOCK_HAS_ESPI) and mainboard to select if it wants to use eSPI instead of LPC for talking to legacy devices and embedded controllers (SOC_AMD_COMMON_BLOCK_USE_ESPI). BUG=b:154445472 Change-Id: I15e9eb25706e09393c019eea4d61b66f17490be6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41069 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	soc/intel/quark: Revamp file headers	Patrick Georgi
	Remove license boiler plate in favor of SPDX headers. Where there's valuable additional information, fix up formatting. Change-Id: I801f27bd1a2b9defd5672a52c3a06eb1a12a9302 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41207 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	treewide: Convert more license headers to SPDX style	Patrick Georgi
	Change-Id: Ia3de79c7d71049da00ed108829eac6cb49ff3ed6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41205 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	driver/i2c/max98390: Add i2c driver for Maxim 98390 codec	Seunghwan Kim
	Add an SSDT generator for Maxim 98390 kernel driver. Copied from 'drivers/i2c/rt1011'. BUG=b:149443429 BRANCH=None TEST=built coreboot and checked audio function with kernel patch on nightfury Change-Id: I64d776c6c9726eb5822ad4dd82f6826c2a30cb1d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39463 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	treewide: Replace BSD-3-Clause and ISC headers with SPDX headers	Patrick Georgi
	Commands used: perl -i -p0e 's\|\/\[\s]Permission[\s]to[\s]use,[\s]copy,[\s]modify,[\s]and.or[\s]distribute[\s]this[\s]software[\s]for[\s]any[\s]purpose[\s]with[\s]or[\s]without[\s]fee[\s]is[\s]hereby[\s]granted,[\s]provided[\s]that[\s]the[\s]above[\s]copyright[\s]notice[\s]and[\s]this[\s]permission[\s]notice[\s]appear[\s]in[\s]all[\s]copies.[\s]THE[\s]SOFTWARE[\s]IS[\s]PROVIDED[\s].AS[\s]IS.[\s]AND[\s]THE[\s]AUTHOR[\s]DISCLAIMS[\s]ALL[\s]WARRANTIES[\s]WITH[\s]REGARD[\s]TO[\s]THIS[\s]SOFTWARE[\s]INCLUDING[\s]ALL[\s]IMPLIED[\s]WARRANTIES[\s]OF[\s]MERCHANTABILITY[\s]AND[\s]FITNESS.[\s]IN[\s]NO[\s]EVENT[\s]SHALL[\s]THE[\s]AUTHOR[\s]BE[\s]LIABLE[\s]FOR[\s]ANY[\s]SPECIAL,[\s]DIRECT,[\s]INDIRECT,[\s]OR[\s]CONSEQUENTIAL[\s]DAMAGES[\s]OR[\s]ANY[\s]DAMAGES[\s]WHATSOEVER[\s]RESULTING[\s]FROM[\s]LOSS[\s]OF[\s]USE,[\s]DATA[\s]OR[\s]PROFITS,[\s]WHETHER[\s]IN[\s]AN[\s]ACTION[\s]OF[\s]CONTRACT,[\s]NEGLIGENCE[\s]OR[\s]OTHER[\s]TORTIOUS[\s]ACTION,[\s]ARISING[\s]OUT[\s]OF[\s]OR[\s]IN[\s]CONNECTION[\s]WITH[\s]THE[\s]USE[\s]OR[\s]PERFORMANCE[\s]OF[\s]THIS[\s]SOFTWARE.[\s]\\/\|/* SPDX-License-Identifier: ISC /\|s' $(cat filelist) perl -i -p0e 's\|(\#\#)\sPermission[\#\s]to[\#\s]use,[\#\s]copy,[\#\s]modify,[\#\s]and.or[\#\s]distribute[\#\s]this[\#\s]software[\#\s]for[\#\s]any[\#\s]purpose[\#\s]with[\#\s]or[\#\s]without[\#\s]fee[\#\s]is[\#\s]hereby[\#\s]granted,[\#\s]provided[\#\s]that[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice[\#\s]and[\#\s]this[\#\s]permission[\#\s]notice[\#\s]appear[\#\s]in[\#\s]all[\#\s]copies.[\#\s]THE[\#\s]SOFTWARE[\#\s]IS[\#\s]PROVIDED[\#\s].AS[\#\s]IS.[\#\s]AND[\#\s]THE[\#\s]AUTHOR[\#\s]DISCLAIMS[\#\s]ALL[\#\s]WARRANTIES[\#\s]WITH[\#\s]REGARD[\#\s]TO[\#\s]THIS[\#\s]SOFTWARE[\#\s]INCLUDING[\#\s]ALL[\#\s]IMPLIED[\#\s]WARRANTIES[\#\s]OF[\#\s]MERCHANTABILITY[\#\s]AND[\#\s]FITNESS.[\#\s]IN[\#\s]NO[\#\s]EVENT[\#\s]SHALL[\#\s]THE[\#\s]AUTHOR[\#\s]BE[\#\s]LIABLE[\#\s]FOR[\#\s]ANY[\#\s]SPECIAL,[\#\s]DIRECT,[\#\s]INDIRECT,[\#\s]OR[\#\s]CONSEQUENTIAL[\#\s]DAMAGES[\#\s]OR[\#\s]ANY[\#\s]DAMAGES[\#\s]WHATSOEVER[\#\s]RESULTING[\#\s]FROM[\#\s]LOSS[\#\s]OF[\#\s]USE,[\#\s]DATA[\#\s]OR[\#\s]PROFITS,[\#\s]WHETHER[\#\s]IN[\#\s]AN[\#\s]ACTION[\#\s]OF[\#\s]CONTRACT,[\#\s]NEGLIGENCE[\#\s]OR[\#\s]OTHER[\#\s]TORTIOUS[\#\s]ACTION,[\#\s]ARISING[\#\s]OUT[\#\s]OF[\#\s]OR[\#\s]IN[\#\s]CONNECTION[\#\s]WITH[\#\s]THE[\#\s]USE[\#\s]OR[\#\s]PERFORMANCE[\#\s]OF[\#\s]THIS[\#\s]SOFTWARE.\s(\# \n)\|\1 SPDX-License-Identifier: ISC\n\n\|s' $(cat filelist) perl -i -p0e 's\|\/\[\s]Redistribution[\s]and[\s]use[\s]in[\s]source[\s]and[\s]binary[\s]forms,[\s]with[\s]or[\s]without[\s]modification,[\s]are[\s]permitted[\s]provided[\s]that[\s]the[\s]following[\s]conditions[\s]are[\s]met:[\s][1. ]Redistributions[\s]of[\s]source[\s]code[\s]must[\s]retain[\s]the[\s]above[\s]copyright[\s]notice,[\s]this[\s]list[\s]of[\s]conditions[\s]and[\s]the[\s]following[\s]disclaimer.[\s][\s][2. ]Redistributions[\s]in[\s]binary[\s]form[\s]must[\s]reproduce[\s]the[\s]above[\s]copyright[\s]notice,[\s]this[\s]list[\s]of[\s]conditions[\s]and[\s]the[\s]following[\s]disclaimer[\s]in[\s]the[\s]documentation[\s]and.or[\s]other[\s]materials[\s]provided[\s]with[\s]the[\s]distribution.[\s][3. ].used[\s]to[\s]endorse[\s]or[\s]promote[\s]products[\s]derived[\s]from[\s]this[\s]software[\s]without[\s]specific[\s]prior[\s]written[\s]permission.[\s]THIS[\s]SOFTWARE[\s]IS[\s]PROVIDED.AS[\s]IS.[\s]AND[\s]ANY[\s]EXPRESS[\s]OR[\s]IMPLIED[\s]WARRANTIES,[\s]INCLUDING,[\s]BUT[\s]NOT[\s]LIMITED[\s]TO,[\s]THE[\s]IMPLIED[\s]WARRANTIES[\s]OF[\s]MERCHANTABILITY.FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.ARE[\s]DISCLAIMED.[\s]IN[\s]NO[\s]EVENT[\s]SHALL.LIABLE[\s]FOR[\s]ANY[\s]DIRECT,[\s]INDIRECT,[\s]INCIDENTAL,[\s]SPECIAL,[\s]EXEMPLARY,[\s]OR[\s]CONSEQUENTIAL[\s]DAMAGES[\s].INCLUDING,[\s]BUT[\s]NOT[\s]LIMITED[\s]TO,[\s]PROCUREMENT[\s]OF[\s]SUBSTITUTE[\s]GOODS[\s]OR[\s]SERVICES;[\s]LOSS[\s]OF[\s]USE,[\s]DATA,[\s]OR[\s]PROFITS;[\s]OR[\s]BUSINESS[\s]INTERRUPTION.[\s]HOWEVER[\s]CAUSED[\s]AND[\s]ON[\s]ANY[\s]THEORY[\s]OF[\s]LIABILITY,[\s]WHETHER[\s]IN[\s]CONTRACT,[\s]STRICT[\s]LIABILITY,[\s]OR[\s]TORT[\s].INCLUDING[\s]NEGLIGENCE[\s]OR[\s]OTHERWISE.[\s]ARISING[\s]IN[\s]ANY[\s]WAY[\s]OUT[\s]OF[\s]THE[\s]USE[\s]OF[\s]THIS[\s]SOFTWARE,[\s]EVEN[\s]IF[\s]ADVISED[\s]OF[\s]THE[\s]POSSIBILITY[\s]OF[\s]SUCH[\s]DAMAGE.[\s]\\/\|/ SPDX-License-Identifier: BSD-3-Clause /\|s' $(cat filelist) $1 perl -i -p0e 's\|(\#\#) Redistribution[\#\s]and[\#\s]use[\#\s]in[\#\s]source[\#\s]and[\#\s]binary[\#\s]forms,[\#\s]with[\#\s]or[\#\s]without[\#\s]modification,[\#\s]are[\#\s]permitted[\#\s]provided[\#\s]that[\#\s]the[\#\s]following[\#\s]conditions[\#\s]are[\#\s]met:[\#\s][1. ]Redistributions[\#\s]of[\#\s]source[\#\s]code[\#\s]must[\#\s]retain[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice,[\#\s]this[\#\s]list[\#\s]of[\#\s]conditions[\#\s]and[\#\s]the[\#\s]following[\#\s]disclaimer.[\#\s][2. ]Redistributions[\#\s]in[\#\s]binary[\#\s]form[\#\s]must[\#\s]reproduce[\#\s]the[\#\s]above[\#\s]copyright[\#\s]notice,[\#\s]this[\#\s]list[\#\s]of[\#\s]conditions[\#\s]and[\#\s]the[\#\s]following[\#\s]disclaimer[\#\s]in[\#\s]the[\#\s]documentation[\#\s]and.or[\#\s]other[\#\s]materials[\#\s]provided[\#\s]with[\#\s]the[\#\s]distribution.[\#\s][\#\s][3. ].used[\#\s]to[\#\s]endorse[\#\s]or[\#\s]promote[\#\s]products[\#\s]derived[\#\s]from[\#\s]this[\#\s]software[\#\s]without[\#\s]specific[\#\s]prior[\#\s]written[\#\s]permission.[\#\s]THIS[\#\s]SOFTWARE[\#\s]IS[\#\s]PROVIDED.AS[\#\s]IS.[\#\s]AND[\#\s]ANY[\#\s]EXPRESS[\#\s]OR[\#\s]IMPLIED[\#\s]WARRANTIES,[\#\s]INCLUDING,[\#\s]BUT[\#\s]NOT[\#\s]LIMITED[\#\s]TO,[\#\s]THE[\#\s]IMPLIED[\#\s]WARRANTIES[\#\s]OF[\#\s]MERCHANTABILITY.FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.ARE[\#\s]DISCLAIMED.[\#\s]IN[\#\s]NO[\#\s]EVENT[\#\s]SHALL.LIABLE[\#\s]FOR[\#\s]ANY[\#\s]DIRECT,[\#\s]INDIRECT,[\#\s]INCIDENTAL,[\#\s]SPECIAL,[\#\s]EXEMPLARY,[\#\s]OR[\#\s]CONSEQUENTIAL[\#\s]DAMAGES[\#\s].INCLUDING,[\#\s]BUT[\#\s]NOT[\#\s]LIMITED[\#\s]TO,[\#\s]PROCUREMENT[\#\s]OF[\#\s]SUBSTITUTE[\#\s]GOODS[\#\s]OR[\#\s]SERVICES;[\#\s]LOSS[\#\s]OF[\#\s]USE,[\#\s]DATA,[\#\s]OR[\#\s]PROFITS;[\#\s]OR[\#\s]BUSINESS[\#\s]INTERRUPTION.[\#\s]HOWEVER[\#\s]CAUSED[\#\s]AND[\#\s]ON[\#\s]ANY[\#\s]THEORY[\#\s]OF[\#\s]LIABILITY,[\#\s]WHETHER[\#\s]IN[\#\s]CONTRACT,[\#\s]STRICT[\#\s]LIABILITY,[\#\s]OR[\#\s]TORT[\#\s].INCLUDING[\#\s]NEGLIGENCE[\#\s]OR[\#\s]OTHERWISE.[\#\s]ARISING[\#\s]IN[\#\s]ANY[\#\s]WAY[\#\s]OUT[\#\s]OF[\#\s]THE[\#\s]USE[\#\s]OF[\#\s]THIS[\#\s]SOFTWARE,[\#\s]EVEN[\#\s]IF[\#\s]ADVISED[\#\s]OF[\#\s]THE[\#\s]POSSIBILITY[\#\s]OF[\#\s]SUCH[\#\s]DAMAGE.\s(\#* \n)\|\1 SPDX-License-Identifier: BSD-3-Clause\n\n\|s' $(cat filelist) Change-Id: I7ff9c503a2efe1017a4666baf0b1a758a04f5634 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-11	treewide: split off license text, remove extra copyright notices	Patrick Georgi
	Copyright notices are best stored in AUTHORS Change-Id: Ib9025c58987ee2f7db600e038f5d3e4edc69aacc Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41203 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	treewide: Remove "this file is part of" lines	Patrick Georgi
	Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " \|egrep ":( /\.\/\$\|#\|;#\|-- \| \ )" \| cut -d: -f1 \|grep -v crossgcc \|grep -v gcov \| grep -v /elf.h \|grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. /") -# This file is part of a set of unofficial pre-commit hooks available -/ This file is part of coreboot / -# This file is part of msrtool. -/ This file is part of msrtool. / - This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. / - This file is part of the coreboot project. - /* This file is part of the coreboot project. / -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/ This file is part of the coreboot project / -/ This file is part of the coreboot project. / -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. / -/ This file is part of the ectool project. / - This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. / -## This file is part of the superiotool project. -/ This file is part of the superiotool project / -/ This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mainboard/asus/p3b-f: Reintroduce as variant of p2b	Keith Hui
	Fold this last ASUS 440BX board into the P2B family, while bringing in some changes: - Devicetree becomes overridetree. - Remove non-existent IR device and disable ACPI device on Super I/O to match OEM firmware. - Add SB GPO settings from OEM firmware to devicetree. This disables the SPD enabling magic this board needs. By moving the enabling part to bootblock the hacky enable_spd hook can be eliminated. - Initialize the serial port in bootblock, like the other boards. Boot tested on hardware. Change-Id: I65f2cb9d1bd4c82550de43889e3502526a46bd18 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41047 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/cyan/*: fixup GPIOs	Matt DeVillier
	Commit 73b723d [google/cyan: Switch Touchpad and Touchscreen...] in additon to changing the touchpad/touchscreen interrupts from edge to level triggered, also marked them as maskable. This was partially reverted in a86bbea0 [google/cyan: set touchscreen GPIO to non_maskable], but did not resolve all of the issues. Additionally, 73b723d also accidentally changed the pad interrupt select from L3 to L1 for all touchscreen GPIOs. Clean up this mess by setting all touchpad/touchscreen GPIOs back to maskable, and set the pad level to L3 for all touchscreen GPIOs. Tested on several cyan variants Change-Id: I70e8e2d4ff317c3b9b4108ed6c5bc80e9b0bbc75 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11	soc/intel/skylake: Allow setting of PcieRpMaxPayload	Wim Vervoorn
	Add setting of the MaxPayload for each root port from the device tree. By default MaxPayload is set to 128 bytes. This change allows changing to 256 bytes. BUG=N/A TEST=tested on facebook monolith Change-Id: I61e1d619588a7084d52bbe101acd757cc7293cac Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-05-11	superio/winbond/w83977tf: Only list IR logical device if needed	Keith Hui
	Really old versions of W83977TF Super I/O had an IR logical device, but is no longer the case. It does not exist in the newer W83977EF version, installed in some Asus P2B family boards, and served by this same code. Add a config option on the off chance we may see board with it (as if we would) and don't include this device unless it is set. Saves us from the need to declare a not-present device off and/or extraneous PNP device errors about a not-present device. Change-Id: I761ebc41f1735a03e768339a68ca139167edc095 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41004 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/octopus/variants/dood: Disable XHCI LFPS power management	Kenneth Chan
	LTE module Fibocom L850-GL is lost after idle overnight, with this workaround, host will not initiate U3 wakeup at the same time with device, which will avoid the race condition. Disable XHCI LFPS power management. If the option is set in the devicetree, the bits[7:4] in XHCI MMIO BAR + offset 0x80A4 (PMCTRL_REG) will be updated from default 9 to 0. BUG=b:155955302 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] are set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I88357f44317a5cff2e04508638eb065e5ada4c4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/41143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marco Chen <marcochen@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2020-05-11	soc/sifive/fu540: Add missing '#include <commonlib/bsd/helpers.h>'	Elyes HAOUAS
	This is used for 'KHz' (line #19) Change-Id: I4d610607b50d2fac1150deaaf94f3cb331540fbc Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Hug <philipp@hug.cx>
2020-05-11	soc/intel/tigerlake: Update C-State info	Wonkyu Kim
	C-State latency table was exposed by both intel-idle driver and BIOS/coreboot. And table in Kernel was used before. After kernel patch (https://patchwork.kernel.org/patch/11290319/), only BIOS/coreboot exposes C-State latency table through _CST. As current C-State latency table info is not correct for Tigerlake, update proper info according to BWG and reference code. - Update latency: CpuPowerMgmt.h Use BIOS reference code as values in BWG is not up-to-dated - Remove MSR program for latency: BWG 4.6.4.3.4 Reference: - TGL BWG #611569 Rev 0.7.6 - https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/master/ ClientOneSiliconPkg/Cpu/Include/CpuPowerMgmt.h BUG=b:155223704 BRANCH=None TEST=Boot to OS and check C-State latency expected result >cat /sys/devices/system/cpu/cpu0/cpuidle/state*/{name,latency} POLL C1_ACPI C2_ACPI C3_ACPI 0 1 253 1048 For detail, refer Bug info. Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: I8bf2976ad35b4cf6f637a99c26b4f98f9f6ee563 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-05-11	mb/intel/jasperlake_rvp: Turn off unused I2C lanes	Pandya, Varshit B
	Change-Id: Id49032c0f9b701fe12873c80e1bc0e4b64ba7106 Signed-off-by: Pandya, Varshit B <varshit.b.pandya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-11	mb/intel/jasperlake_rvp: Add support for SMI handler	Maulik V Vaghela
	SMI handler was not present in jasperlake rvp to handle wake events when platform goes to sleep or shutdown or s0ix. Adding this support for board which supports chromeec. BUG=None BRANCH=None TEST=Check wake event on board and platform wakes up due to events lid wake event or power button press. Change-Id: I8e35955b06d6efaf9275ec03f519c9bcaa9ba345 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-11	mb/google/kukui: fix screen scrolling on devices using anx7625	Paul Ma
	anx7625 enables MIPI receiver to check EOTP packet as default. If MIPI_DSI_MODE_EOT_PACKET is not set in flags, soc dsi will not send out EOTP packet and some panel models will display abnormal such as scrolling all the time. BUG=b:144824303 BRANCH=kukui TEST=boot damu board, edp panel with anx7625 as bridge boots up without scrolling. Signed-off-by: Paul Ma <magf@bitland.corp-partner.google.com> Change-Id: Iad651202bde2a40024af8c12153143ada2ce2439 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41161 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	mb/google/kukui: Fix backlight flash white before show logo	Jitao Shi
	Turn backlight off before panel poweron. BUG=b:155107047 TEST=make # board = kukui BRANCH=kukui Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Change-Id: I0f31923bd7c1dfa26d4b1bbd0a230ae400b08ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41146 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11	soc/intel/xeon_sp: make CPX ramstage.h common for CPX, SKX	Michael Niewöhner
	CB:41106 revealed that mb/intel/cedarisland already sets FSP-S UPD (see CB:40735) while the required includes are still missing in CPX. Buildbot did not fail because `ramstage.c` never was (implicitly) included. Fix this problem by making SKX/CPX share a common ramstage header for now by moving the one from SKX. Test: Build cedarisland_crb Change-Id: I9cd25edd167ec71ee98c7ffa4fa6f95ca73a75e9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-05-11	soc/intel/jasperlake: Add ACPI device name for Storage controllers	Karthikeyan Ramasubramanian
	This enables adding ACPI objects at run-time for SD Card and EMMC devices. BUG=b:150872580 TEST=Build and boot the mainboard. Observe ACPI objects like card detect gpio are added to the SSDT. Change-Id: I754aee3b0fd343994bd06d9c28e038f651009d6d Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-11	mb/google/octopus: Fix default FMD	Matt DeVillier
	On Apollo Lake/Gemini Lake platforms, FSP requires more than a simple RW_MRC_CACHE; without the RECOVERY and VAR cache regions, FSP-m will fail on s3 resume and trigger a full reset instead. This fixes the default.fmd for octopus to match that used for reef. Test: build/boot google/ampton, verify sleep/resume works under Linux with 5.x kernel. Change-Id: I8565aa93256df7d6e0b359d70e9305f34e5ccb60 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41016 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-11	soc/intel/jasperlake: Enable end of post support in FSP	Aamir Bohra
	Send end of post message to CSME in FSP, by selecting EndOfPost message in PEI phase. In API mode which coreboot currently uses, sending EndOfPost message in DXE phase is not applicable. Change-Id: Ie21dcfc84d331f036090d01ea3e3925b81eea902 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40612 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-05-10	mb/google/kahlee: Hold WLAN PCIe reset low at boot for mordin	Kevin Chiu
	gpio70 is assigned to use as WLAN rst in new schematic to fulfill RTK RTL8822CE power sequence: WLAN rst will need to be active at least 50ms after WLAN power on. Also in order to keep the rst low in consistency, override default gpio70 to low. BUG=b:154357210,b:154848243 BRANCH=master TEST=emerge-grunt coreboot Change-Id: I98c8afe42b7f92016f83483acbb3b9ae64b159f7 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40805 Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-10	mb/google/kahlee: Don't reset the touchpad/screen on boot	Martin Roth
	touchpad & touchscreen power enable gets reset during resume causing unintended wake interrupts, causing dark resume failures. This prevents the board from being shut down after it's been suspended for a long period of time and can end up draining the battery. BUG=b:153173717 TEST=Build only - Needs to be tested by ODMs. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: If403da8853e59eaaf589062c9bd6f10deb626998 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41063 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com>
2020-05-10	src: Replace remaining GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I4614e9b02a932530fc22912b5cf502d1b699b451 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-10	src/mainboard: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I64d9468682a4aae3084b17b8724d035f17d01dff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-10	src/cpu: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I160617babdc189d842ea84b0b68938d45fbe978f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-09	src/: Replace GPL boilerplate with SPDX header	Patrick Georgi
	Command used: perl -i -p0e 's\|(\#\#)[\w].is[\#\s]licensed[\#\s]under[\#\s]the[\#\s]terms[\#\s]of[\#\s]the[\#\s]GNU[\#\s]General[\#\s]Public[\#\s]License[\#\s]version[\#\s]2,[\#\s]as[\#\s]published[\#\s]by[\#\s]the[\#\s]Free[\#\s]Software[\#\s]Foundation,[\#\s]and[\#\s]may[\#\s]be[\#\s]copied,[\#\s]distributed,[\#\s]and[\#\s]modified[\#\s]under[\#\s]those[\#\s]terms.[\#\s]This[\#\s]program[\#\s]is[\#\s]distributed[\#\s]in[\#\s]the[\#\s]hope[\#\s]that[\#\s]it[\#\s]will[\#\s]be[\#\s]useful,[\#\s]but[\#\s]WITHOUT[\#\s]ANY[\#\s]WARRANTY;[\#\s]without[\#\s]even[\#\s]the[\#\s]implied[\#\s]warranty[\#\s]of[\#\s]MERCHANTABILITY[\#\s]or[\#\s]FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.[\#\s]See[\#\s]the[\#\s]GNU[\#\s]General[\#\s]Public[\#\s]License[\#\s]for[\#\s]more[\#\s]details.\s(# \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) Change-Id: Ia7ce0a78f96563b8dc0f6eb648c4ba4cefb2b838 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41180 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09	src/: Replace GPL boilerplate with SPDX headers	Patrick Georgi
	Used commands: perl -i -p0e 's\|\/\[\s].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/ SPDX-License-Identifier: GPL-2.0-only /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s]free[\s]software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]either[\s]version[\s]2[\s]of[\s]the[\s]License,[\s]or[\s].at[\s]your[\s]option.[\s]any[\s]later[\s]version.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-2.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|\/\[\s].is[\s#]free[\s#]software[;:,][\s#]you[\s#]can[\s#]redistribute[\s#]it[\s#]and/or[\s#]modify[\s#]it[\s#]under[\s#]the[\s#]terms[\s#]of[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]as[\s#]published[\s#]by[\s#]the[\s#]Free[\s#]Software[\s#]Foundation[;:,][\s#]either[\s#]version[\s#]3[\s#]of[\s#]the[\s#]License[;:,][\s#]or[\s#].at[\s#]your[\s#]option.[\s#]any[\s#]later[\s#]version.[\s#]This[\s#]program[\s#]is[\s#]distributed[\s#]in[\s#]the[\s#]hope[\s#]that[\s#]it[\s#]will[\s#]be[\s#]useful[;:,][\s#]but[\s#]WITHOUT[\s#]ANY[\s#]WARRANTY[;:,][\s#]without[\s#]even[\s#]the[\s#]implied[\s#]warranty[\s#]of[\s#]MERCHANTABILITY[\s#]or[\s#]FITNESS[\s#]FOR[\s#]A[\s#]PARTICULAR[\s#]PURPOSE.[\s#]See[\s#]the[\s#]GNU[\s#]General[\s#]Public[\s#]License[\s#]for[\s#]more[\s#]details.[\s]\\/\|/* SPDX-License-Identifier: GPL-3.0-or-later /\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\#\s]you[\#\s]can[\#\s]redistribute[\#\s]it[\#\s]and\/or[\#\s]modify[\#\s]it[\s\#]under[\s \#]the[\s\#]terms[\s\#]of[\s\#]the[\s\#]GNU[\s\#]General[\s\#]Public[\s\#]License[\s\#]as[\s\#]published[\s\#]by[\s\#]the[\s\#]Free[\s\#]Software[\s\#]Foundation[;,][\s\#]version[\s\#]2[\s\#]of[\s\#]the[\s\#]License.[\s\#]This[\s\#]program[\s\#]is[\s\#]distributed[\s\#]in[\s\#]the[\s\#]hope[\s\#]that[\s\#]it[\s\#]will[\#\s]be[\#\s]useful,[\#\s]but[\#\s]WITHOUT[\#\s]ANY[\#\s]WARRANTY;[\#\s]without[\#\s]even[\#\s]the[\#\s]implied[\#\s]warranty[\#\s]of[\#\s]MERCHANTABILITY[\#\s]or[\#\s]FITNESS[\#\s]FOR[\#\s]A[\#\s]PARTICULAR[\#\s]PURPOSE.[\#\s]See[\#\s]the[\#\s]GNU[\#\s]General[\#\s]Public[\#\s]License[\#\s]for[\#\s]more[\#\s]details.\s(# \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) perl -i -p0e 's\|(\#\#)[\w].is free software[:;][\s]you[\s]can[\s]redistribute[\s]it[\s]and\/or[\s]modify[\s]it[\s]under[\s]the[\s]terms[\s]of[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]as[\s]published[\s]by[\s]the[\s]Free[\s]Software[\s]Foundation[;,][\s]version[\s]2[\s]of[\s]the[\s]License.[\s]This[\s]program[\s]is[\s]distributed[\s]in[\s]the[\s]hope[\s]that[\s]it[\s]will[\s]be[\s]useful,[\s]but[\s]WITHOUT[\s]ANY[\s]WARRANTY;[\s]without[\s]even[\s]the[\s]implied[\s]warranty[\s]of[\s]MERCHANTABILITY[\s]or[\s]FITNESS[\s]FOR[\s]A[\s]PARTICULAR[\s]PURPOSE.[\s]See[\s]the[\s]GNU[\s]General[\s]Public[\s]License[\s]for[\s]more[\s]details.\s(#* \n)\|\1 SPDX-License-Identifier: GPL-2.0-only\n\n\|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09	vboot: Clean up pre-RAM use of vboot_recovery_mode_enabled()	Julius Werner
	vboot_recovery_mode_enabled() was recently changed to assert() when it is called before vboot logic has run, because we cannot determine whether we're going to be in recovery mode at that point and we wanted to flush out existing uses that pretended that we could. Turns out there are a bunch of uses like that, and there is some code that is shared across configurations that can and those that can't. This patch cleans them up to either remove checks that cannot return true, or add explicit Kconfig guards to clarify that the code is shared. This means that using a separate recovery MRC cache is no longer supported on boards that use VBOOT_STARTS_IN_ROMSTAGE (this has already been broken with CB:38780, but with this patch those boards will boot again using their normal MRC caches rather than just die). Skipping the MRC cache and always regenerating from scratch in recovery mode is likewise no longer supported for VBOOT_STARTS_IN_ROMSTAGE. For FSP1.1 boards, none of them support VBOOT_STARTS_IN_BOOTBLOCK and that is unlikely to change in the future so we will just hardcode that fact in Kconfig (otherwise, fsp1.1 raminit would also have to be fixed to work around this issue). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I31bfc7663724fdacab9955224dcaf650d1ec1c3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/39221 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-08	commonlib/region: Add region_overlap	Patrick Rudolph
	Add inline function to check if two regions overlap. Change-Id: I6f3dfaa9f0805893bd691ba64f112944d89a8e71 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	sb/intel/i82371eb: Fix iasl warning	Keith Hui
	The backslash on the very last line is not needed and causes an iasl warning. Change-Id: I27e78bc34b9386dd014db5880a104693b4f0db5a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41094 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	security: tcg-2.0: Ignore data payload for errors, fix Cr50 boot mode	Julius Werner
	This patch improves the response buffer handling for TPM 2.0. Previously we would allow any command to return no payload, but if there was a payload we would always try to unmarshal it according to the normal success response. This was sort of relying on the fact that the TPM usually returns no additional data after the header for error responses, but in practice that is not always true. It also means that commands without a response payload accidentally work by default even though we did not explicitly add unmarshallig support for them, which seems undesirable. Adding explicit unmarshalling support for TPM2_SelfTest which was only supported through this loophole before. This patch changes the behavior to always accept any amount of payload data for error responses but not unmarshal any of it. None of our use cases actually care about payload data for errors, so it seems safer to not even try to interpret it. For success responses, on the other hand, we always require support for the command to be explicitly added. This fixes a problem with the Cr50 GET_BOOT_MODE command where an error response would only return the subcommand code but no data after that. Also add support for a second, slightly different NO_SUCH_COMMAND error code that was added in Cr50 recently. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib85032d85482d5484180be6fd105f2467f393cd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41100 Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Reviewed-by: Andrey Pronin <apronin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	memrange: Break early from memranges_find_entry if limit is crossed	Furquan Shaikh
	This change updates memranges_find_entry() to break and return early if the end address of the hole within the current range entry crosses the requested limit. This is because all range entries and maintained in increasing order and so none of the following range entries can satisfy the given request. Change-Id: I14e03946ddbbb5d254b23e9a9917da42960313a6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-08	memrange: Update comment to indicate limit is inclusive for memranges_next_entry	Furquan Shaikh
	This change updates the comment for memranges_next_entry() to indicate that the limit provided by the caller is inclusive. Change-Id: Id40263efcb9417ed31c130996e56c30dbbc82e02 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-08	sb/intel/bd82x6x: Put temp BAR in a define	Angel Pons
	We use a temporary BAR value to program the thermal settings. To make this more obvious, factor it out. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: Icda6e4100d954fe28d2624270b5d7ab7ed155e32 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-08	sb/intel/bd82x6x: Do cosmetic fixes	Angel Pons
	Make the code follow the coding style, and reflow things that fit in 96 characters. Tested with BUILD_TIMELESS=1, Asus P8Z77-V LX2 does not change. Change-Id: I6e0acdc9c21d4b416597dc776bd9abab12bff4a0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-08	nb/intel/haswell/northbridge.c: Fix typo	Angel Pons
	`TESGMB` => `TSEGMB` Change-Id: Id48bed068f9d2be7201e7fa120b00608f6fe2f98 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-08	sb/intel/*/me_status.c: Fix typo	Angel Pons
	Looks like someone couldn't decide between `enter` and `entry`. According to ME documentation, it should be the latter, so fix it. Change-Id: I971fb667264be97cdffa2b2b0e155f5dcacdaab7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-08	{security,soc}/*/Kconfig: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: Ie3721f6a93dacb8014f93aa86780d51a659a68df Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41145 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-08	northbridge/*/Kconfig: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: Ief2fdedbdba3b7d1708adb2519eb01242e9b52ab Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-08	southbridge/*/Kconfig: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I339b455683ad481720b67a322bf51c891c2b611d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41142 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	mainboard///*.asl: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I5970cd188d06214d410949f4a3f8816c85c39451 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41141 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	mainboard//.spd.hex: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I3eb39d985f2712ab0a7a5a76b06ed625eb51c9d0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41140 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	lib/rtc.c: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I812f81307c68a9383619f185633e0a8423319f22 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	{drivers,ec/kontron}: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: Ide6cfd6f79bd54f50d9fde37c55f2b0df702478a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	cpu/x86/mtrr: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I9d97cac214f04604f956cd9eee1e281b75c93645 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	soc/nvidia: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I7cc9adc95af5a8fc3cd69462d49efb1550e30295 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41133 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	soc/qualcomm: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: Ib51e5e9c6159e9b3c2890d0455343bcc0c14b6fe Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41131 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	soc/intel: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: I468d2ba85033c41ba53333ebbfd6f4108a36e407 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41130 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-08	sb/intel/i82371eb: Replace GPLv2 long form headers with SPDX header	Elyes HAOUAS
	Change-Id: If54234ec2d80d5a6502400eb1c6f02dd9bba73c5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41129 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-08	vboot: Provide declaration for verstage_mainboard_early_init()	Furquan Shaikh
	Similar to bootblock, provide declaration for verstage_mainboard_early_init() to support early mainboard initialization if verstage is run before bootblock. BUG=b:155824234 TEST=Verified that trembyle still builds Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I106213ecc1c44100f1f74071189518563ac08121 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41137 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-05-08	soc/intel/skl: Drop `acpi_mainboard_gnvs`	Angel Pons
	Literally nobody else uses it and it does nothing. Change-Id: I7e6466137b5069a7f785972205bd43f3cb25d378 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41112 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-08	mb/google/reef: add G2 TS support for snappy	Kevin Chiu
	Add G2 GTCH7503 HID TS support spec from G2: G7500 / Ver.1.2 (3, April, 2018) BUG=b:155827595 BRANCH=master TEST=emerge-snappy coreboot Change-Id: I151bf141148f4f00b3dadd9c44ab3a6b7731cde1 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41090 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-07	memrange: constify memranges_is_empty()	Aaron Durbin
	memranges_is_empty() doesn't need to manipulate the object. Mark the parameter as const. Change-Id: I89f4ec404c144eac8d2900945a1ccaf5cc4f88bb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41102 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-07	arch/x86: unexpose postcar_frame_common_mtrrs()	Aaron Durbin
	The only caller is contained within the postcar_loader compilation unit. Therefore, remove postcar_frame_common_mtrrs() from the global symbol namespace. Change-Id: I90d308669d13eb2bebf1eca4d47e3f3b4f178714 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-07	mb/x9scl/early_init: Remove unused includes	Elyes HAOUAS
	Change-Id: I455a43ab6c4931a4fb1f717a65013b6b7cefb777 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-07	soc/intel/tigerlake: Add PMC to platform ACPI name entry	John Zhao
	PMC device name string "PMC" is added to platform soc_acpi_name() for pmc driver. BUG=b:151646486 TEST=Built and booted to kernel successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ida7fc7e2340f2a809464ca66fd1922f3229e2e18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41064 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-07	soc/amd/common/block/lpc: Use standard pci_dev_ops_pci	Furquan Shaikh
	AMD common block LPC driver does not really need a custom ops_pci structure. This change drops the lops_pci and instead set .ops_pci to the default pci_dev_ops_pci. BUG=b:154445472 Change-Id: Ia06eed04097739c3e21dc13e056a2120ff5eb382 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41068 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-05-06	treewide: replace GPLv2 long form headers with SPDX header	Patrick Georgi
	This replaces GPLv2-or-later and GPLv2-only long form text with the short SPDX identifiers. Commands used: perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.as.published.by.the.Free.Software.Foundation[;,].version.2.of.the.License.or.(at.your.option).any.later.version.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/ SPDX-License-Identifier: GPL-2.0-or-later /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.as.published.by.the.Free.Software.Foundation[;,].version.2.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This program is free software[:;].you.can.redistribute.it.and/or.modify.it.under.the.terms.of.the.GNU.General.Public.License.version.2.as.published.by.the.Free.Software.Foundation[.;,].+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only /\|s' $(cat filelist) perl -i -p0e 's\|/\[\n\t ]This software is licensed under.the.terms.of.the.GNU.General.Public.License.version.2.as.published.by.the.Free.Software.Foundation,.+This.program.is.distributed.in.the.hope.that.it.will.be.useful,.but.;.without.even.the.implied.warranty.of.MERCHANTABILITY.or.FITNESS.FOR.A.PARTICULAR.PURPOSE...See.the.GNU.General.Public.License for more details.[\n\t ]\/\|/* SPDX-License-Identifier: GPL-2.0-only */\|s' $(cat filelist) Change-Id: I7a746088a35633c11fc7ebe86006e96458a1abf8 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06	treewide: move copyrights and authors to AUTHORS	Patrick Georgi
	Also split "this is part of" line from copyright notices. Change-Id: Ibc2446410bcb3104ead458b40a9ce7819c61a8eb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-05-06	treewide: Move "is part of the coreboot project" line in its own comment	Patrick Georgi
	That makes it easier to identify "license only" headers (because they are now license only) Script line used for that: perl -i -p0e 's\|/\.\n.This file is part of the coreboot project.\n.\\|/* This file is part of the coreboot project. /\n/\|' # ...filelist... Change-Id: I2280b19972e37c36d8c67a67e0320296567fa4f6 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-06	soc/intel/tgl: Synchronize GPIO ASL table with Linux kernel	Shaunak Saha
	Kernel pinctrl driver changed for Tiger Lake and went to old scheme. Kernel patch: https://chromium-review.googlesource.com/c/chromiumos/ third_party/kernel/+/2116670 BUG=b:151683980 BRANCH=none TEST=Build and boot tgl board. In /sys/kernel/debug/pinctrl verify INTC34C5:00 listing all the pins. Cq-Depend:chromium:2116670 Change-Id: I9f1d399ff7380125ad5b935f9590a7d9cc442b04 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39801 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06	soc/intel/tigerlake: Print HPR_CAUSE0 register	derek.huang
	In addition to GBLRST_CAUSE0 and GBLRST_CAUSE1, print the value of HPR_CAUSE0. Change-Id: Idc57c3cd6a8d156c5544640898e8e7147d34c535 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-06	elog: Add new elog types for CSME-initiated host reset	derek.huang
	Change-Id: Iddae1c7cbc71ce10b126a1e05abf9269e8187a38 Signed-off-by: derek.huang <derek.huang@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40687 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06	mb/google/dedede: Enable PMC, P2SB and PCH SPI in the devicetree	Karthikeyan Ramasubramanian
	BUG=None TEST=Build and boot the mainboard. Change-Id: I1aae4adf1c13fd4ff58aa38a877f34e142f320f1 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41037 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-06	mb/purism/librem_skl: select DRIVERS_GENERIC_CBFS_SERIAL	Matt DeVillier
	This driver was previously added for another out-of-tree Librem device, but forgot to switch over the librem_skl boards to use it. Remove duplicate functionality from mainboard.c and delete the empty file. Test: build/boot Librem 13v2 and verify serial number read from CBFS via dmidecode. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Ide952197335c6bfbad846c6d6f62be5c4c57e2cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-05-06	mb/purism/librem_{bdw,skl}: select MAINBOARD_HAS_TPM1	Matt DeVillier
	Current model Librems all have a TPM 1.2 module, so select it at the board level to avoid having to do so in .config. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Iab8b39c39aef2a3fc182f1a50091f84f2151a394 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41038 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-05	mb/intel/jasperlake_rvp: Configure IP specific GPIOs	Maulik V Vaghela
	This patch configures all IP related GPIOs as per mainboard schematics. Till now, we were relying on FSP to do IP specific GPIO programming but now we'll program all GPIOs from mainboard. This will remove ambiguity of GPIO programming done by FSP and coreboot will do full GPIO programming Programming GPIOs of following IPs - I2C - Emmc - Display - CPU specific gpio (SLP lines) - Cnvi - SD BUG=None BRANCH=None TEST=compile coreboot and checked that all IP functionality working. Change-Id: I98583b768cbd8ab4af536b31d758cb1cee93edfb Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40572 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2020-05-05	soc/intel/jasperlake: Correct the EMMC PCR Port ID	Ronak Kanabar
	Updating EMMC PCR PID from 0x52 to 0x51 for Jasperlake BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP from emmc Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: I17d4e7b7e0fe5e0b18867b6481b5bc9227ae19e3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2020-05-05	soc/intel/jasperlake: Allow SD card power enable polarity configuration	Ronak Kanabar
	SdCardPowerEnableActiveHigh is a UPD which controls polarity of SD card power enable pin. Setting it 1 will set polarity of this pin as Active high. This patch will allow to control it from devicetree so that it can be set as per each board's requirement. BUG=b:155595624 BRANCH=None TEST=Build, boot JSLRVP, Verified UPD value from FSP log Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Change-Id: Id777a262651689952a217875e6606f67855fc2f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41027 Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-05	superio/fintek/f81216h: Drop support	Keith Hui
	No mainboards use this anymore. Change-Id: I2d58d73eca0be1f4daf9106a1258274486f803a5 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-05	soc/intel/tigerlake: Add PMC mux control	John Zhao
	PMC supports messages that can be used for configuring the USB Type-C Multiplexer/Demultiplexer. BUG=b:151646486 TEST=Booted to kernel on volteer board and verified PMC and Mux agent devices identification. Change-Id: I00c5f929b2eea5de3f8eba794dbe9b36c8083c52 Signed-off-by: John Zhao <john.zhao@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-05	soc/amd/picasso: add Kconfig option to disable rom sharing	Aaron Durbin
	Add a knob for mainboards to request disablement of the SPI flash ROM sharing in the chipset. The chipset allows the board to share the SPI flash bus and needs a pin to perform the request. If the board design does not employ SPI flash ROM sharing then it's imperative to ensure this option is selected, especially if the pin is being utilized by something else in the board design. BUG=b:153502861 Change-Id: I60ba852070dd218c4ac071b6c1cfcde2df8e5dce Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2146445 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Commit-Queue: Aaron Durbin <adurbin@google.com> Tested-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-05	soc/amd/common/block/lpc: Add lpc_disable_spi_rom_sharing	Raul E Rangel
	If a Picasso platform wants to use GPIO 67 it must disable ROM sharing. Otherwise ROM access is incredibly slow. BUG=b:153502861 TEST=Build trembyle Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia9ab3803a2f56f68c1164bd241fc3917a3ffcf2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-05-04	soc/intel/tigerlake: Update interrupt setting	Wonkyu Kim
	Update interrupt setting based on latest FSP(3163.01) Reference: https://github.com/otcshare/CCG-TGL-Generic-SiC/blob/TGL.3163.01/ ClientOneSiliconPkg/IpBlock/Itss/LibraryPrivate/PeiItssPolicyLib/ PeiItssPolicyLibVer2.c BUG=b:155315876 BRANCH=none TEST=Build with new FSP(3163.01) and boot OS and login OS console in ripto/volteer. Without this change, we can't login due to mismatch interrupt setting between asl and fsp setting. Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com> Change-Id: Ibf70974b8c4f63184d576be3edd290960b023b1e Reviewed-on: https://review.coreboot.org/c/coreboot/+/40872 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	src/soc/tigerlake: Update SerialIoDebugMode UPD in FSP-M	Srinidhi N Kaushik
	Due to refactoring of Serial IO code in FSP v3163 onwards we need to set SerialIoUartDebugMode UPD in FSP-M to SkipInit so that SerialIoUart initialization is skipped in FSP. This makes sure that SerialIo initialization in coreboot is not changed by FSP. BUG=b:155315876 BRANCH=none TEST=build and boot tglrvp/ripto/volteer and check UART debug logs Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: I8ba4b9015fa25a84b6b99419ce4d413c9d9daa44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40899 Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	vendorcode/intel/fsp: Update Tiger Lake FSP Headers for FSP v3163	Srinidhi N Kaushik
	Update FSP headers for Tiger Lake platform generated based FSP version 3163. Which includes below additional UPDs: FSPM: -BootFrequency -SerialIoUartDebugMode FSPS: -PcieRpPmSci -PchPmWoWlanEnable -PchPmWoWlanDeepSxEnable -PchPmLanWakeFromDeepSx BUG=b:155315876 BRANCH=none TEST=build and boot ripto/volteer Cq-Depend: chrome-internal:2944102 Cq-Depend: chrome-internal:2939733 Cq-Depend: chrome-internal:2943140 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Change-Id: Ida87ac7dd7f5fd7ee0459ae1037a8df816976083 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40898 Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Dossym Nurmukhanov <dossym@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	mb/purism/librem_skl: disable serial console output	Matt DeVillier
	Librem SKL/KBL boards do not have an exposed serial port interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot librem 13v4 with board defaults + Tianocore Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I4c3f8a3c1726f804957b06b437b399291854a3f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40873 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-05-04	mb/purism/librem_skl: Clean up Kconfig	Matt DeVillier
	Reorder Kconfig selects alphabetically, and select the correct SoC for each variant (even though it currently makes no difference). Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I46f651a530ef0ed617dd1f3eee077e84279a40f2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40913 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Michael Niewöhner Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	mb/purism/librem_skl: rename variant directories	Matt DeVillier
	Since the same variant dirs are used by multiple versions of the same board, drop the v2/v3 labels. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: Id913e31ab52043e49769be9d3ebf6e71ecb0c856 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40912 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-05-04	mb/purism/librem_skl: Convert to use override devicetree	Matt DeVillier
	Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I3dac62a649e12ea2498d3ecafe03fd0d62af5f2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/40911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04	mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe	Matt DeVillier
	Per the schematics, SRCCLKREQ2# is used for the NVMe and should be enabled. Enable CLKREQ for PCIe RP9, and adjust comments to indicate correct value used per schematic. Test: build/boot Librem 15v3 with NVMe drive, verify drive identified properly and no errors in boot log. Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Change-Id: I159cb7ce1f5195d95c0229490c3bbde26edbd375 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40950 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-05-04	mb/purism/librem_skl: drop SataSpeedLimit restriction	Matt DeVillier
	SataSpeedLimit was set to 3Gbps to work around issues which are now known to be the result of incorrect FSP behavior. Since SataPwrOptEnable is now set at the SoC level and ensures the SIR registers are correctly programmed, we can re-enable 6Gbps operation without errors. Test: build/boot Librem 13v2 with both m.2 and 2.5" SATA drives, check dmesg for errors. Change-Id: I3565dc063724ad288ef92361942fcdc14daac17e Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40909 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	soc/intel/skl: always enable SataPwrOptEnable	Michael Niewöhner
	For unknown reasons FSP skips a whole bunch of SIR (SATA Initialization Registers) when SataPwrOptEnable=0, which currently is the default in coreboot and FSP. Even if FSP's default was 1, coreboot would reset it. This can lead to all sorts of problems and errors, for example: - links get lost - only 1.5 or 3 Gbps instead of 6 Gbps - "unaligned write" errors in Linux - ... At least on two boards (supermicro/x11-lga1151-series/x11ssm-f and purism/librem13v2) SATA is not working correctly and showing such symptoms. To let FSP correctly initialize the SATA controller, enable the option SataPwrOptEnable statically. There is no valid reason to disable it, which might break SATA, anyway. Currently, there are no reported issues on CML and CNL, so a change there could not be tested reliably. SKL/KBL was tested successfully without any noticable downsides. Thus, only SKL gets changed for now. Change-Id: I8531ba9743453a3118b389565517eb769b5e7929 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40877 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-04	soc/intel/cannonlake: Add DisableHeciRetry to config	Christian Walter
	Add DisableHeciRetry to the chip config and parse it in romstage. Change-Id: I460b51834c7de42e68fe3d54c66acd1022a3bdaf Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2020-05-04	mb/up/squared: Fix eMMC speed for UP2 with EDK2	Patrik Tesarik
	Since commit 402fe20e (mb/up/squared: Add mainboard) the UP2's eMMC maximum host speed was reduced to DDR50, because HS200 showed I/O errors in the host kernel. We found out that with EDK2 master the correct Host Speed could not be set properly during EDK2 platform init. Therefore eMMC would not show up for boot device selection. This commit sets the eMMC MaxHostSpeed to the designed max value of the used eMMC on the UP2 board and furthermore drops the override from the ramstage.c. It's already set in the devicetree.cb. Though CRC errors are still visible in EDK II debug logs, no other negative effects have been observed. Signed-off-by: Patrik Tesarik <mail@patrik-tesarik.de> Change-Id: I8d53204d8a776efd560fbdea918f83e180813179 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>